Re: New kernel warning after updating from LTS 5.15.110 to 5.15.112 (and 5.15.113)

["Jarkko Sakkinen" <jarkko@kernel.org>]

On Wed Jun 7, 2023 at 12:04 AM EEST, Chris Packham wrote:
> Hi Jarkko,
>
> On 6/06/23 21:39, Jarkko Sakkinen wrote:
> > On Sun, 2023-05-28 at 23:42 +0000, Chris Packham wrote:
> >> Hi,
> >>
> >> We have an embedded product with an Infineon SLM9670 TPM. After updating
> >> to a newer LTS kernel version we started seeing the following warning at
> >> boot.
> >>
> >> [    4.741025] ------------[ cut here ]------------
> >> [    4.749894] irq 38 handler tis_int_handler+0x0/0x154 enabled interrupts
> >> [    4.756555] WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159
> >> __handle_irq_event_percpu+0xf4/0x180
> >> [    4.765557] Modules linked in:
> >> [    4.768626] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.113 #1
> >> [    4.774747] Hardware name: Allied Telesis x250-18XS (DT)
> >> [    4.780080] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS
> >> BTYPE=--)
> >> [    4.787072] pc : __handle_irq_event_percpu+0xf4/0x180
> >> [    4.792146] lr : __handle_irq_event_percpu+0xf4/0x180
> >> [    4.797220] sp : ffff800008003e40
> >> [    4.800547] x29: ffff800008003e40 x28: ffff8000093951c0 x27:
> >> ffff80000902a9b8
> >> [    4.807716] x26: ffff800008fe8d28 x25: ffff8000094a62bd x24:
> >> ffff000001b92400
> >> [    4.814885] x23: 0000000000000026 x22: ffff800008003ec4 x21:
> >> 0000000000000000
> >> [    4.822053] x20: 0000000000000001 x19: ffff000002381200 x18:
> >> ffffffffffffffff
> >> [    4.829222] x17: ffff800076962000 x16: ffff800008000000 x15:
> >> ffff800088003b57
> >> [    4.836390] x14: 0000000000000000 x13: ffff8000093a5078 x12:
> >> 000000000000035d
> >> [    4.843558] x11: 000000000000011f x10: ffff8000093a5078 x9 :
> >> ffff8000093a5078
> >> [    4.850727] x8 : 00000000ffffefff x7 : ffff8000093fd078 x6 :
> >> ffff8000093fd078
> >> [    4.857895] x5 : 000000000000bff4 x4 : 0000000000000000 x3 :
> >> 0000000000000000
> >> [    4.865062] x2 : 0000000000000000 x1 : 0000000000000000 x0 :
> >> ffff8000093951c0
> >> [    4.872230] Call trace:
> >> [    4.874686]  __handle_irq_event_percpu+0xf4/0x180
> >> [    4.879411]  handle_irq_event+0x64/0xec
> >> [    4.883264]  handle_level_irq+0xc0/0x1b0
> >> [    4.887202]  generic_handle_irq+0x30/0x50
> >> [    4.891229]  mvebu_gpio_irq_handler+0x11c/0x2a0
> >> [    4.895780]  handle_domain_irq+0x60/0x90
> >> [    4.899720]  gic_handle_irq+0x4c/0xd0
> >> [    4.903398]  call_on_irq_stack+0x20/0x4c
> >> [    4.907338]  do_interrupt_handler+0x54/0x60
> >> [    4.911538]  el1_interrupt+0x30/0x80
> >> [    4.915130]  el1h_64_irq_handler+0x18/0x24
> >> [    4.919244]  el1h_64_irq+0x78/0x7c
> >> [    4.922659]  arch_cpu_idle+0x18/0x2c
> >> [    4.926249]  do_idle+0xc4/0x150
> >> [    4.929404]  cpu_startup_entry+0x28/0x60
> >> [    4.933343]  rest_init+0xe4/0xf4
> >> [    4.936584]  arch_call_rest_init+0x10/0x1c
> >> [    4.940699]  start_kernel+0x600/0x640
> >> [    4.944375]  __primary_switched+0xbc/0xc4
> >> [    4.948402] ---[ end trace 940193047b35b311 ]---
> >>
> >> Initially I dismissed this as a warning that would probably be cleaned
> >> up when we did more work on the TPM support for our product but we also
> >> seem to be getting some new i2c issues and possibly a kernel stack
> >> corruption that we've conflated with this TPM warning.
> > Hi, sorry for late response. I've been moving my (home) office to
> > a different location during last couple of weeks, and email has been
> > piling up.
> >
> > What does dmidecode give you?
> >
> > More specific, I'm interested on DMI type 43:
> >
> > $ sudo dmidecode -t 43
> > # dmidecode 3.4
> > Getting SMBIOS data from sysfs.
> > SMBIOS 3.4.0 present.
> >
> > Handle 0x004D, DMI type 43, 31 bytes
> > TPM Device
> > 	Vendor ID: INTC
> > 	Specification Version: 2.0
> > 	Firmware Revision: 600.18
> > 	Description: INTEL
> > 	Characteristics:
> > 		Family configurable via platform software support
> > 	OEM-specific Information: 0x00000000
> >
> > BR, Jarkko
>
> This is an embedded ARM64 (Marvell CN9130 SoC) device so no BIOS. The 
> relevant snippet from the device tree is
>
>          tpm@1 {
>                  compatible = "infineon,slb9670";
>                  reg = <1>; /* Chip select 1 */
>                  interrupt-parent = <&cp0_gpio2>;
>                  interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
>                  spi-max-frequency = <31250000>;
>          };
>
> and I can tell you that the specific TPM chip is an Infinieon 
> SLM9670AQ20FW1311XTMA1

OK, you know what I own that chip in the form of LetsTrustTPM
product.

I have not used it a lot because of lack of time but I could try
to reproduce the bug with that and RPi 3B, or at least see what
happens with different hardware platform with the same TPM chip.

BR, Jarkko