* [PATCH V5 0/2] power: bq27xxx: add bq78z100
@ 2021-03-05 6:49 LI Qingwu
2021-03-05 6:49 ` [PATCH V5 1/2] dt-bindings: " LI Qingwu
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: LI Qingwu @ 2021-03-05 6:49 UTC (permalink / raw)
To: sre, robh+dt, pali, krzk, afd, linux-pm, devicetree,
linux-kernel, sebastian.reichel
Cc: grygorii.tertychnyi, andrey.zhizhikin, LI Qingwu
Changes in V5:
1. Change [BQ27XXX_REG_TTES] from INVALID_REG_ADDR to 0x1c,
the StandbyTimeToEmpty command of bq78z100.
2. Add [BQ27XXX_REG_RC] = 0x10. the RemainingCapacity command of
bq78z100.
3. Set [BQ27XXX_REG_AE] to INVALID_REG_ADDR, support by bq78z100.
4. Delete property POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, not support
by bq78z100
LI Qingwu (2):
dt-bindings: power: bq27xxx: add bq78z100
power: supply: bq27xxx: Add support for BQ78Z100
.../bindings/power/supply/bq27xxx.yaml | 1 +
drivers/power/supply/bq27xxx_battery.c | 44 +++++++++++++++++++
drivers/power/supply/bq27xxx_battery_i2c.c | 2 +
include/linux/power/bq27xxx_battery.h | 1 +
4 files changed, 48 insertions(+)
--
2.17.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH V5 1/2] dt-bindings: power: bq27xxx: add bq78z100
2021-03-05 6:49 [PATCH V5 0/2] power: bq27xxx: add bq78z100 LI Qingwu
@ 2021-03-05 6:49 ` LI Qingwu
2021-03-05 6:49 ` [PATCH V5 2/2] power: supply: bq27xxx: Add support for BQ78Z100 LI Qingwu
2021-03-14 23:42 ` [PATCH V5 0/2] power: bq27xxx: add bq78z100 Sebastian Reichel
2 siblings, 0 replies; 6+ messages in thread
From: LI Qingwu @ 2021-03-05 6:49 UTC (permalink / raw)
To: sre, robh+dt, pali, krzk, afd, linux-pm, devicetree,
linux-kernel, sebastian.reichel
Cc: grygorii.tertychnyi, andrey.zhizhikin, LI Qingwu
Add bindings for TI BQ78Z100. An I2C interface gas gauge.
It provides a fully integrated safety protection
and authentication for 1 to 2-series cell Li-Ion and
Li-Polymer battery packs.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
---
Documentation/devicetree/bindings/power/supply/bq27xxx.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
index 45beefccf31a..712e974b28b6 100644
--- a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
@@ -52,6 +52,7 @@ properties:
- ti,bq27z561
- ti,bq28z610
- ti,bq34z100
+ - ti,bq78z100
reg:
maxItems: 1
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH V5 2/2] power: supply: bq27xxx: Add support for BQ78Z100
2021-03-05 6:49 [PATCH V5 0/2] power: bq27xxx: add bq78z100 LI Qingwu
2021-03-05 6:49 ` [PATCH V5 1/2] dt-bindings: " LI Qingwu
@ 2021-03-05 6:49 ` LI Qingwu
2021-03-14 23:42 ` [PATCH V5 0/2] power: bq27xxx: add bq78z100 Sebastian Reichel
2 siblings, 0 replies; 6+ messages in thread
From: LI Qingwu @ 2021-03-05 6:49 UTC (permalink / raw)
To: sre, robh+dt, pali, krzk, afd, linux-pm, devicetree,
linux-kernel, sebastian.reichel
Cc: grygorii.tertychnyi, andrey.zhizhikin, LI Qingwu
Add support for TI BQ78Z100, I2C interface gas gauge.
It provides a fully integrated safety protection
and authentication for 1 to 2-series cell Li-Ion and
Li-Polymer battery packs.
The patch was tested with BQ78Z100 equipment.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
---
drivers/power/supply/bq27xxx_battery.c | 44 ++++++++++++++++++++++
drivers/power/supply/bq27xxx_battery_i2c.c | 2 +
include/linux/power/bq27xxx_battery.h | 1 +
3 files changed, 47 insertions(+)
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index 4c4a7b1c64c5..05a4f9190160 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -39,6 +39,7 @@
* https://www.ti.com/product/bq27z561
* https://www.ti.com/product/bq28z610
* https://www.ti.com/product/bq34z100-g1
+ * https://www.ti.com/product/bq78z100
*/
#include <linux/device.h>
@@ -515,6 +516,27 @@ static u8
[BQ27XXX_REG_DCAP] = 0x3c,
[BQ27XXX_REG_AP] = 0x22,
BQ27XXX_DM_REG_ROWS,
+ },
+ bq78z100_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = 0x28,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = 0x18,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_RC] = 0x10,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x22,
+ BQ27XXX_DM_REG_ROWS,
};
static enum power_supply_property bq27000_props[] = {
@@ -813,6 +835,26 @@ static enum power_supply_property bq34z100_props[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
};
+static enum power_supply_property bq78z100_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
struct bq27xxx_dm_reg {
u8 subclass_id;
u8 offset;
@@ -911,6 +953,7 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
#define bq27z561_dm_regs 0
#define bq28z610_dm_regs 0
#define bq34z100_dm_regs 0
+#define bq78z100_dm_regs 0
#define BQ27XXX_O_ZERO BIT(0)
#define BQ27XXX_O_OTDC BIT(1) /* has OTC/OTD overtemperature flags */
@@ -969,6 +1012,7 @@ static struct {
[BQ28Z610] = BQ27XXX_DATA(bq28z610, 0 , BQ27Z561_O_BITS),
[BQ34Z100] = BQ27XXX_DATA(bq34z100, 0 , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \
BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM),
+ [BQ78Z100] = BQ27XXX_DATA(bq78z100, 0x00000000, BQ27Z561_O_BITS),
};
static DEFINE_MUTEX(bq27xxx_list_lock);
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
index eb4f4284982f..46f078350fd3 100644
--- a/drivers/power/supply/bq27xxx_battery_i2c.c
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -248,6 +248,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
{ "bq27z561", BQ27Z561 },
{ "bq28z610", BQ28Z610 },
{ "bq34z100", BQ34Z100 },
+ { "bq78z100", BQ78Z100 },
{},
};
MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
@@ -284,6 +285,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
{ .compatible = "ti,bq27z561" },
{ .compatible = "ti,bq28z610" },
{ .compatible = "ti,bq34z100" },
+ { .compatible = "ti,bq78z100" },
{},
};
MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
index 111a40d0d3d5..ac17618043b1 100644
--- a/include/linux/power/bq27xxx_battery.h
+++ b/include/linux/power/bq27xxx_battery.h
@@ -33,6 +33,7 @@ enum bq27xxx_chip {
BQ27Z561,
BQ28Z610,
BQ34Z100,
+ BQ78Z100,
};
struct bq27xxx_device_info;
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH V5 0/2] power: bq27xxx: add bq78z100
2021-03-05 6:49 [PATCH V5 0/2] power: bq27xxx: add bq78z100 LI Qingwu
2021-03-05 6:49 ` [PATCH V5 1/2] dt-bindings: " LI Qingwu
2021-03-05 6:49 ` [PATCH V5 2/2] power: supply: bq27xxx: Add support for BQ78Z100 LI Qingwu
@ 2021-03-14 23:42 ` Sebastian Reichel
2021-03-15 7:52 ` LI Qingwu
2021-03-17 9:47 ` LI Qingwu
2 siblings, 2 replies; 6+ messages in thread
From: Sebastian Reichel @ 2021-03-14 23:42 UTC (permalink / raw)
To: LI Qingwu
Cc: robh+dt, pali, krzk, afd, linux-pm, devicetree, linux-kernel,
grygorii.tertychnyi, andrey.zhizhikin
[-- Attachment #1: Type: text/plain, Size: 1282 bytes --]
Hi,
On Fri, Mar 05, 2021 at 06:49:47AM +0000, LI Qingwu wrote:
> Changes in V5:
>
> 1. Change [BQ27XXX_REG_TTES] from INVALID_REG_ADDR to 0x1c,
> the StandbyTimeToEmpty command of bq78z100.
> 2. Add [BQ27XXX_REG_RC] = 0x10. the RemainingCapacity command of
> bq78z100.
> 3. Set [BQ27XXX_REG_AE] to INVALID_REG_ADDR, support by bq78z100.
> 4. Delete property POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, not support
> by bq78z100
I also asked to check other exposed properties and to provide
a dump of the power-supply uevent in commit message or cover
letter to verify chip works as expected. I cannot see the dump
and you are exposing at least one property that always reports
-ENODATA. I intentionally will not point out the exact property,
so that you have to properly test your patch before submitting.
Thanks,
-- Sebastian
> LI Qingwu (2):
> dt-bindings: power: bq27xxx: add bq78z100
> power: supply: bq27xxx: Add support for BQ78Z100
>
> .../bindings/power/supply/bq27xxx.yaml | 1 +
> drivers/power/supply/bq27xxx_battery.c | 44 +++++++++++++++++++
> drivers/power/supply/bq27xxx_battery_i2c.c | 2 +
> include/linux/power/bq27xxx_battery.h | 1 +
> 4 files changed, 48 insertions(+)
>
> --
> 2.17.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH V5 0/2] power: bq27xxx: add bq78z100
2021-03-14 23:42 ` [PATCH V5 0/2] power: bq27xxx: add bq78z100 Sebastian Reichel
@ 2021-03-15 7:52 ` LI Qingwu
2021-03-17 9:47 ` LI Qingwu
1 sibling, 0 replies; 6+ messages in thread
From: LI Qingwu @ 2021-03-15 7:52 UTC (permalink / raw)
To: Sebastian Reichel
Cc: robh+dt, pali, krzk, afd, linux-pm, devicetree, linux-kernel,
TERTYCHNYI Grygorii, ZHIZHIKIN Andrey
Hi Sebastian,
Thanks for your input, I will and dump message into next version patch.
Best Regards
**********************************************
Li Qingwu (Terry)
Senior Embedded Software Engineer
Leica Geosystems(Shanghai)Co.,Limited
(Tel): +86 21 61061036
(FAX): +86 21 61061008
(Mobile): +86 187 0185 9600
E-mail: Qing-wu.Li@leica-geosystems.com.cn
Http: www.leica-geosystems.com.cn
**********************************************
-----Original Message-----
From: Sebastian Reichel <sre@kernel.org>
Sent: Monday, March 15, 2021 7:42 AM
To: LI Qingwu <qing-wu.li@leica-geosystems.com.cn>
Cc: robh+dt@kernel.org; pali@kernel.org; krzk@kernel.org; afd@ti.com; linux-pm@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; TERTYCHNYI Grygorii <grygorii.tertychnyi@leica-geosystems.com>; ZHIZHIKIN Andrey <andrey.zhizhikin@leica-geosystems.com>
Subject: Re: [PATCH V5 0/2] power: bq27xxx: add bq78z100
Hi,
On Fri, Mar 05, 2021 at 06:49:47AM +0000, LI Qingwu wrote:
> Changes in V5:
>
> 1. Change [BQ27XXX_REG_TTES] from INVALID_REG_ADDR to 0x1c, the
> StandbyTimeToEmpty command of bq78z100.
> 2. Add [BQ27XXX_REG_RC] = 0x10. the RemainingCapacity command of
> bq78z100.
> 3. Set [BQ27XXX_REG_AE] to INVALID_REG_ADDR, support by bq78z100.
> 4. Delete property POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, not support by
> bq78z100
I also asked to check other exposed properties and to provide a dump of the power-supply uevent in commit message or cover letter to verify chip works as expected. I cannot see the dump and you are exposing at least one property that always reports -ENODATA. I intentionally will not point out the exact property, so that you have to properly test your patch before submitting.
Thanks,
-- Sebastian
> LI Qingwu (2):
> dt-bindings: power: bq27xxx: add bq78z100
> power: supply: bq27xxx: Add support for BQ78Z100
>
> .../bindings/power/supply/bq27xxx.yaml | 1 +
> drivers/power/supply/bq27xxx_battery.c | 44 +++++++++++++++++++
> drivers/power/supply/bq27xxx_battery_i2c.c | 2 +
> include/linux/power/bq27xxx_battery.h | 1 +
> 4 files changed, 48 insertions(+)
>
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH V5 0/2] power: bq27xxx: add bq78z100
2021-03-14 23:42 ` [PATCH V5 0/2] power: bq27xxx: add bq78z100 Sebastian Reichel
2021-03-15 7:52 ` LI Qingwu
@ 2021-03-17 9:47 ` LI Qingwu
1 sibling, 0 replies; 6+ messages in thread
From: LI Qingwu @ 2021-03-17 9:47 UTC (permalink / raw)
To: Sebastian Reichel
Cc: robh+dt, pali, krzk, afd, linux-pm, devicetree, linux-kernel,
TERTYCHNYI Grygorii, ZHIZHIKIN Andrey
Hi Sebastian,
Here is the dump of the "uevent", I tested two cases, discharging current >0 and discharging current =0.
If discharging current=0:
POWER_SUPPLY_TIME_TO_EMPTY_NOW and POWER_SUPPLY_TIME_TO_FULL_NOW are disappear,
the value is "-ENODATA"
If discharging current>0:
POWER_SUPPLY_TIME_TO_FULL_NOW is disappear,
the value is "-ENODATA"
Since I can't test charging on our hardware, I think "POWER_SUPPLY_TIME_TO_FULL_NOW" will show up during charging, since the value is given by register 0x18 with index "BQ27XXX_REG_TTF".
TEST CASE I: discharging current >0:
POWER_SUPPLY_NAME=bq78z100-0
POWER_SUPPLY_STATUS=Discharging
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_VOLTAGE_NOW=3405000
POWER_SUPPLY_CURRENT_NOW=4000
POWER_SUPPLY_CAPACITY=28
POWER_SUPPLY_CAPACITY_LEVEL=Normal
POWER_SUPPLY_TEMP=259
POWER_SUPPLY_TIME_TO_EMPTY_NOW=1611000
POWER_SUPPLY_TECHNOLOGY=Li-ion
POWER_SUPPLY_CHARGE_FULL=6494000
POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000
POWER_SUPPLY_CYCLE_COUNT=1
POWER_SUPPLY_ENERGY_NOW=0
POWER_SUPPLY_POWER_AVG=65535
POWER_SUPPLY_HEALTH=Good
POWER_SUPPLY_MANUFACTURER=Texas Instruments
TEST CASE II : discharging current =0:
POWER_SUPPLY_NAME=bq78z100-0
POWER_SUPPLY_STATUS=Discharging
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_VOLTAGE_NOW=3405000
POWER_SUPPLY_CURRENT_NOW=0
POWER_SUPPLY_CAPACITY=28
POWER_SUPPLY_CAPACITY_LEVEL=Normal
POWER_SUPPLY_TEMP=260
POWER_SUPPLY_TECHNOLOGY=Li-ion
POWER_SUPPLY_CHARGE_FULL=6494000
POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000
POWER_SUPPLY_CYCLE_COUNT=1
POWER_SUPPLY_ENERGY_NOW=0
POWER_SUPPLY_POWER_AVG=0
POWER_SUPPLY_HEALTH=Good
POWER_SUPPLY_MANUFACTURER=Texas Instruments
Best Regards
Li Qingwu (Terry)
Best Regards
Li Qingwu (Terry)
-----Original Message-----
From: Sebastian Reichel <sre@kernel.org>
Sent: Monday, March 15, 2021 7:42 AM
To: LI Qingwu <qing-wu.li@leica-geosystems.com.cn>
Cc: robh+dt@kernel.org; pali@kernel.org; krzk@kernel.org; afd@ti.com; linux-pm@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; TERTYCHNYI Grygorii <grygorii.tertychnyi@leica-geosystems.com>; ZHIZHIKIN Andrey <andrey.zhizhikin@leica-geosystems.com>
Subject: Re: [PATCH V5 0/2] power: bq27xxx: add bq78z100
Hi,
On Fri, Mar 05, 2021 at 06:49:47AM +0000, LI Qingwu wrote:
> Changes in V5:
>
> 1. Change [BQ27XXX_REG_TTES] from INVALID_REG_ADDR to 0x1c, the
> StandbyTimeToEmpty command of bq78z100.
> 2. Add [BQ27XXX_REG_RC] = 0x10. the RemainingCapacity command of
> bq78z100.
> 3. Set [BQ27XXX_REG_AE] to INVALID_REG_ADDR, support by bq78z100.
> 4. Delete property POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, not support by
> bq78z100
I also asked to check other exposed properties and to provide a dump of the power-supply uevent in commit message or cover letter to verify chip works as expected. I cannot see the dump and you are exposing at least one property that always reports -ENODATA. I intentionally will not point out the exact property, so that you have to properly test your patch before submitting.
Thanks,
-- Sebastian
> LI Qingwu (2):
> dt-bindings: power: bq27xxx: add bq78z100
> power: supply: bq27xxx: Add support for BQ78Z100
>
> .../bindings/power/supply/bq27xxx.yaml | 1 +
> drivers/power/supply/bq27xxx_battery.c | 44 +++++++++++++++++++
> drivers/power/supply/bq27xxx_battery_i2c.c | 2 +
> include/linux/power/bq27xxx_battery.h | 1 +
> 4 files changed, 48 insertions(+)
>
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-03-17 9:48 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-05 6:49 [PATCH V5 0/2] power: bq27xxx: add bq78z100 LI Qingwu
2021-03-05 6:49 ` [PATCH V5 1/2] dt-bindings: " LI Qingwu
2021-03-05 6:49 ` [PATCH V5 2/2] power: supply: bq27xxx: Add support for BQ78Z100 LI Qingwu
2021-03-14 23:42 ` [PATCH V5 0/2] power: bq27xxx: add bq78z100 Sebastian Reichel
2021-03-15 7:52 ` LI Qingwu
2021-03-17 9:47 ` LI Qingwu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).