RE: [PATCH v10 0/6] EDAC: Enhancements to Synopsys EDAC driver

[Manish Narani <MNARANI@xilinx.com>]

Ping!


> -----Original Message-----
> From: Manish Narani [mailto:manish.narani@xilinx.com]
> Sent: Thursday, October 25, 2018 11:37 AM
> To: robh+dt@kernel.org; mark.rutland@arm.com; Michal Simek
> <michals@xilinx.com>; bp@alien8.de; mchehab@kernel.org; Manish Narani
> <MNARANI@xilinx.com>; amit.kucheria@linaro.org; sudeep.holla@arm.com;
> leoyang.li@nxp.com
> Cc: devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-edac@vger.kernel.org
> Subject: [PATCH v10 0/6] EDAC: Enhancements to Synopsys EDAC driver
> 
> This patch series enhances the current EDAC driver to support different
> platforms. This series adds support for ZynqMP DDRC controller in synopsys
> EDAC driver. This series also adds Device tree properties and relevant binding
> documentation.
> 
> Changes in v2:
> 	- Moved checking of DDR_ECC_INTR_SUPPORT from (1/4) to (3/4) as it
> is
> 	  a feature of ZynqMP DDRC
> 	- The Binding Documentation in (2/4) is modified as per the review
> 	  comments
> 
> Changes in v3:
> 	- The commit message in (2/4) is modified (Synopsys EDAC Driver -->
> 	  ZynqMP DDRC)
> 
> Changes in v4:
> 	- Updated the commit message in (1/4)
> 	- Renamed function pointer names removing 'synps_' in (1/4)
> 	- Shortened unnecessary long lines as per the review comment on (1/4)
> 
> Changes in v5:
> 	- Updated the commit message in (2/4) and (4/4).
> 	- Removed the unnecessary check for match data in probe() in (1/4)
> 	- Some Indentation changes for better readability in (1/4) and (3/4)
> 	- Removed repeated code in (3/4)
> 	- Used 'zynq' and 'zynqmp' instead of 'synps_enh_edac' in function
> names
> 
> Changes in v6:
> 	- Splitted the patches according to functionalities
> 	- Addressed code style comments from v5 review
> 	- Moved the Error Injection to CONFIG_EDAC_DEBUG mode
> 
> Changes in v7:
> 	- Included DTS patch (6/7) which was missed in v6 patch set
> 
> Changes in v8:
> 	- patch (1/7) from v7 is split in to 3 different logically different patches
> 		1. functional changes like code cleanup
> 		2. functions renaming
> 		3. comments cleanup
> 	- Added a separate patch (4) for making always successful functions as
> void
> 	- Corrected 'Too many parentheses' review comment in patch (5)
> 	- Corrected comments as per the v7 review feedback
> 	- Made dedicated functions for IRQ setup, IRQ enable and IRQ disable
> in patch (8)
> 	- Addressed review comments in patch (10)
> 
> Changes in v9:
> 	- Added check for return value of of_device_get_match_data() function
> 	  in (1/6).
> 	- From v8 the first 5 patches are removed in this series as they are
> 	  applied on:
> 
> 	https://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git/?h=edac-for-
> 4.20-synps
> 	- Updated Kconfig to check for ARCH_ZYNQMP instead of ARM64
> 
> Change in v10:
> 	- Moved the checking for ce_cnt and ue_cnt before the readl() call
> 	- Aligned arguments on the opening brace in setup_irq()
> 
> Manish Narani (6):
>   edac: synopsys: Add error handling for NULL in probe()
>   dt: bindings: Document ZynqMP DDRC in Synopsys documentation
>   edac: synopsys: Add macro defines for ZynqMP DDRC
>   edac: synopsys: Add EDAC ECC support for ZynqMP DDRC
>   arm64: zynqmp: Add DDRC node
>   edac: synopsys: Add Error Injection support for ZynqMP DDRC
> 
>  .../bindings/memory-controllers/synopsys.txt       |  27 +-
>  arch/arm64/boot/dts/xilinx/zynqmp.dtsi             |   7 +
>  drivers/edac/Kconfig                               |   2 +-
>  drivers/edac/synopsys_edac.c                       | 911 ++++++++++++++++++++-
>  4 files changed, 918 insertions(+), 29 deletions(-)
> 
> --
> 2.1.1