* [PATCH 0/2] mmc: update life time and rel write on sysfs read
@ 2022-03-09 10:40 Marc Mattmueller
2022-03-09 10:40 ` [PATCH 1/2] mmc: core: update life time and pre eol info values " Marc Mattmueller
2022-03-09 10:40 ` [PATCH 2/2] mmc: core: add reliable write setting to sysfs and update on read Marc Mattmueller
0 siblings, 2 replies; 8+ messages in thread
From: Marc Mattmueller @ 2022-03-09 10:40 UTC (permalink / raw)
To: ulf.hansson, linux-mmc, linux-kernel; +Cc: Marc Mattmueller
This patchset adds the update of the ext_csd structure when
reading the estimated life time, pre-eol info or reliable
write setting from sysfs. Based on
https://www.spinics.net/lists/linux-mmc/msg56424.html
The reason for this patchset resides in devices running 24/7.
The mmc estimated life time values, pre-eol info and reliable
write setting values were only read at start-up and were not
updated on sysfs read. Thus, these patches add the rel_param,
rel_write_set to sysfs and perform an update of the EXT_CSD
structure when reading form sysfs one of the values
device_life_time_est_typ_a, device_life_time_est_typ_b,
pre_eol_info or rel_write_set.
Marc Mattmueller (2):
mmc: core: update life time and pre eol info values on sysfs read
mmc: core: add reliable write setting to sysfs and update on read
drivers/mmc/core/mmc.c | 116 +++++++++++++++++++++++++++++++++++++--
include/linux/mmc/card.h | 1 +
include/linux/mmc/mmc.h | 1 +
3 files changed, 114 insertions(+), 4 deletions(-)
--
2.20.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] mmc: core: update life time and pre eol info values on sysfs read
2022-03-09 10:40 [PATCH 0/2] mmc: update life time and rel write on sysfs read Marc Mattmueller
@ 2022-03-09 10:40 ` Marc Mattmueller
2022-03-10 14:07 ` Avri Altman
2022-03-09 10:40 ` [PATCH 2/2] mmc: core: add reliable write setting to sysfs and update on read Marc Mattmueller
1 sibling, 1 reply; 8+ messages in thread
From: Marc Mattmueller @ 2022-03-09 10:40 UTC (permalink / raw)
To: ulf.hansson, linux-mmc, linux-kernel; +Cc: Marc Mattmueller
The mmc estimated life time values and pre-eol info values were
only read at start-up and were not updated on sysfs read.
Thus, added update of the ext_csd structure on sysfs read of
device_life_time_est_typ_a, device_life_time_est_typ_b and
pre_eol_info.
Signed-off-by: Marc Mattmueller <marc.mattmueller@netmodule.com>
---
drivers/mmc/core/mmc.c | 87 ++++++++++++++++++++++++++++++++++++++++--
1 file changed, 83 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 43d1b9b2fa49..d9537c894e33 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -357,6 +357,25 @@ static void mmc_manage_gp_partitions(struct mmc_card *card, u8 *ext_csd)
/* Minimum partition switch timeout in milliseconds */
#define MMC_MIN_PART_SWITCH_TIME 300
+/*
+ * Update extended CSD parameters changing during runtime.
+ */
+static int mmc_update_ext_csd_runtime_params(struct mmc_card *card, u8 *ext_csd)
+{
+ int err = 0;
+
+ /* eMMC v5 or later */
+ if (card->ext_csd.rev >= 7) {
+ card->ext_csd.pre_eol_info = ext_csd[EXT_CSD_PRE_EOL_INFO];
+ card->ext_csd.device_life_time_est_typ_a =
+ ext_csd[EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A];
+ card->ext_csd.device_life_time_est_typ_b =
+ ext_csd[EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B];
+ }
+
+ return err;
+}
+
/*
* Decode extended CSD.
*/
@@ -367,6 +386,16 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
struct device_node *np;
bool broken_hpi = false;
+ /*
+ * After once having initialized the ext_csd structure, we want to
+ * update only the changing parts. To check this the revistion is
+ * taken.
+ */
+ if (card->ext_csd.rev != 0) {
+ err = mmc_update_ext_csd_runtime_params(card, ext_csd);
+ goto out;
+ }
+
/* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */
card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
if (card->csd.structure == 3) {
@@ -791,10 +820,6 @@ MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv);
MMC_DEV_ATTR(rev, "0x%x\n", card->ext_csd.rev);
-MMC_DEV_ATTR(pre_eol_info, "0x%02x\n", card->ext_csd.pre_eol_info);
-MMC_DEV_ATTR(life_time, "0x%02x 0x%02x\n",
- card->ext_csd.device_life_time_est_typ_a,
- card->ext_csd.device_life_time_est_typ_b);
MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
card->ext_csd.enhanced_area_offset);
@@ -807,6 +832,60 @@ MMC_DEV_ATTR(ocr, "0x%08x\n", card->ocr);
MMC_DEV_ATTR(rca, "0x%04x\n", card->rca);
MMC_DEV_ATTR(cmdq_en, "%d\n", card->ext_csd.cmdq_en);
+static int mmc_update_csd(struct mmc_card *card)
+{
+ int err = 0;
+
+ mmc_claim_host(card->host);
+ err = mmc_read_ext_csd(card);
+ mmc_release_host(card->host);
+ return err;
+}
+
+static ssize_t life_time_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int err = 0;
+ struct mmc_card *card = mmc_dev_to_card(dev);
+
+ /* before eMMC v5 */
+ if (card->ext_csd.rev < 7)
+ return sprintf(buf, "%s\n", "-");
+
+ /* eMMC v5 or later */
+ err = mmc_update_csd(card);
+ if (err)
+ return (ssize_t)err;
+
+ return sprintf(buf, "0x%02x 0x%02x\n",
+ card->ext_csd.device_life_time_est_typ_a,
+ card->ext_csd.device_life_time_est_typ_b);
+}
+
+static DEVICE_ATTR_RO(life_time);
+
+static ssize_t pre_eol_info_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int err = 0;
+ struct mmc_card *card = mmc_dev_to_card(dev);
+
+ /* before eMMC v5 */
+ if (card->ext_csd.rev < 7)
+ return sprintf(buf, "%s\n", "-");
+
+ /* eMMC v5 or later */
+ err = mmc_update_csd(card);
+ if (err)
+ return (ssize_t)err;
+
+ return sprintf(buf, "0x%02x\n", card->ext_csd.pre_eol_info);
+}
+
+static DEVICE_ATTR_RO(pre_eol_info);
+
static ssize_t mmc_fwrev_show(struct device *dev,
struct device_attribute *attr,
char *buf)
--
2.20.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] mmc: core: add reliable write setting to sysfs and update on read
2022-03-09 10:40 [PATCH 0/2] mmc: update life time and rel write on sysfs read Marc Mattmueller
2022-03-09 10:40 ` [PATCH 1/2] mmc: core: update life time and pre eol info values " Marc Mattmueller
@ 2022-03-09 10:40 ` Marc Mattmueller
2022-03-10 14:08 ` Avri Altman
1 sibling, 1 reply; 8+ messages in thread
From: Marc Mattmueller @ 2022-03-09 10:40 UTC (permalink / raw)
To: ulf.hansson, linux-mmc, linux-kernel; +Cc: Marc Mattmueller
The mmc reliable write setting (from ext_csd) was not available
on the sysfs.
Thus, added rel_param and rel_write_set to sysfs and added the
update of rel_write_set on sysfs read.
Signed-off-by: Marc Mattmueller <marc.mattmueller@netmodule.com>
---
drivers/mmc/core/mmc.c | 29 +++++++++++++++++++++++++++++
include/linux/mmc/card.h | 1 +
include/linux/mmc/mmc.h | 1 +
3 files changed, 31 insertions(+)
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index d9537c894e33..a64d1ecb0de9 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -364,6 +364,10 @@ static int mmc_update_ext_csd_runtime_params(struct mmc_card *card, u8 *ext_csd)
{
int err = 0;
+ /* eMMC v4.41 or later */
+ if (card->ext_csd.rev >= 5)
+ card->ext_csd.rel_wr_set = ext_csd[EXT_CSD_WR_REL_SET];
+
/* eMMC v5 or later */
if (card->ext_csd.rev >= 7) {
card->ext_csd.pre_eol_info = ext_csd[EXT_CSD_PRE_EOL_INFO];
@@ -587,6 +591,7 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
}
card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM];
+ card->ext_csd.rel_wr_set = ext_csd[EXT_CSD_WR_REL_SET];
card->ext_csd.rst_n_function = ext_csd[EXT_CSD_RST_N_FUNCTION];
/*
@@ -820,6 +825,7 @@ MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv);
MMC_DEV_ATTR(rev, "0x%x\n", card->ext_csd.rev);
+MMC_DEV_ATTR(rel_param, "0x%02x\n", card->ext_csd.rel_param);
MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
card->ext_csd.enhanced_area_offset);
@@ -886,6 +892,27 @@ static ssize_t pre_eol_info_show(struct device *dev,
static DEVICE_ATTR_RO(pre_eol_info);
+static ssize_t rel_write_set_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int err = 0;
+ struct mmc_card *card = mmc_dev_to_card(dev);
+
+ /* before eMMC v4.41 */
+ if (card->ext_csd.rev < 5)
+ return sprintf(buf, "%s\n", "-");
+
+ /* eMMC v4.41 or later */
+ err = mmc_update_csd(card);
+ if (err)
+ return (ssize_t)err;
+
+ return sprintf(buf, "0x%02x\n", card->ext_csd.rel_wr_set);
+}
+
+static DEVICE_ATTR_RO(rel_write_set);
+
static ssize_t mmc_fwrev_show(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -931,6 +958,8 @@ static struct attribute *mmc_std_attrs[] = {
&dev_attr_oemid.attr,
&dev_attr_prv.attr,
&dev_attr_rev.attr,
+ &dev_attr_rel_param.attr,
+ &dev_attr_rel_write_set.attr,
&dev_attr_pre_eol_info.attr,
&dev_attr_life_time.attr,
&dev_attr_serial.attr,
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 37f975875102..21c47893fcb4 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -48,6 +48,7 @@ struct mmc_ext_csd {
u8 sec_feature_support;
u8 rel_sectors;
u8 rel_param;
+ u8 rel_wr_set;
bool enhanced_rpmb_supported;
u8 part_config;
u8 cache_ctrl;
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index d9a65c6a8816..42afd442a70a 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -266,6 +266,7 @@ static inline bool mmc_ready_for_data(u32 status)
#define EXT_CSD_BKOPS_START 164 /* W */
#define EXT_CSD_SANITIZE_START 165 /* W */
#define EXT_CSD_WR_REL_PARAM 166 /* RO */
+#define EXT_CSD_WR_REL_SET 167 /* R/W */
#define EXT_CSD_RPMB_MULT 168 /* RO */
#define EXT_CSD_FW_CONFIG 169 /* R/W */
#define EXT_CSD_BOOT_WP 173 /* R/W */
--
2.20.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* RE: [PATCH 1/2] mmc: core: update life time and pre eol info values on sysfs read
2022-03-09 10:40 ` [PATCH 1/2] mmc: core: update life time and pre eol info values " Marc Mattmueller
@ 2022-03-10 14:07 ` Avri Altman
0 siblings, 0 replies; 8+ messages in thread
From: Avri Altman @ 2022-03-10 14:07 UTC (permalink / raw)
To: Marc Mattmueller, ulf.hansson, linux-mmc, linux-kernel
> The mmc estimated life time values and pre-eol info values were only read at
> start-up and were not updated on sysfs read.
> Thus, added update of the ext_csd structure on sysfs read of
> device_life_time_est_typ_a, device_life_time_est_typ_b and pre_eol_info.
I agree that a snapshot on init doesn't make much sense.
But you can read it using mmc-utils, why not just remove the useless entries?
Thanks,
Avri
>
> Signed-off-by: Marc Mattmueller <marc.mattmueller@netmodule.com>
> ---
> drivers/mmc/core/mmc.c | 87
> ++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 83 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index
> 43d1b9b2fa49..d9537c894e33 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -357,6 +357,25 @@ static void mmc_manage_gp_partitions(struct
> mmc_card *card, u8 *ext_csd)
> /* Minimum partition switch timeout in milliseconds */
> #define MMC_MIN_PART_SWITCH_TIME 300
>
> +/*
> + * Update extended CSD parameters changing during runtime.
> + */
> +static int mmc_update_ext_csd_runtime_params(struct mmc_card *card,
> u8
> +*ext_csd) {
> + int err = 0;
> +
> + /* eMMC v5 or later */
> + if (card->ext_csd.rev >= 7) {
> + card->ext_csd.pre_eol_info = ext_csd[EXT_CSD_PRE_EOL_INFO];
> + card->ext_csd.device_life_time_est_typ_a =
> + ext_csd[EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A];
> + card->ext_csd.device_life_time_est_typ_b =
> + ext_csd[EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B];
> + }
> +
> + return err;
> +}
> +
> /*
> * Decode extended CSD.
> */
> @@ -367,6 +386,16 @@ static int mmc_decode_ext_csd(struct mmc_card
> *card, u8 *ext_csd)
> struct device_node *np;
> bool broken_hpi = false;
>
> + /*
> + * After once having initialized the ext_csd structure, we want to
> + * update only the changing parts. To check this the revistion is
> + * taken.
> + */
> + if (card->ext_csd.rev != 0) {
> + err = mmc_update_ext_csd_runtime_params(card, ext_csd);
> + goto out;
> + }
> +
> /* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register
> */
> card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
> if (card->csd.structure == 3) {
> @@ -791,10 +820,6 @@ MMC_DEV_ATTR(name, "%s\n", card-
> >cid.prod_name); MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
> MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv); MMC_DEV_ATTR(rev,
> "0x%x\n", card->ext_csd.rev); -MMC_DEV_ATTR(pre_eol_info, "0x%02x\n",
> card->ext_csd.pre_eol_info); -MMC_DEV_ATTR(life_time, "0x%02x
> 0x%02x\n",
> - card->ext_csd.device_life_time_est_typ_a,
> - card->ext_csd.device_life_time_est_typ_b);
> MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
> MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
> card->ext_csd.enhanced_area_offset);
> @@ -807,6 +832,60 @@ MMC_DEV_ATTR(ocr, "0x%08x\n", card->ocr);
> MMC_DEV_ATTR(rca, "0x%04x\n", card->rca); MMC_DEV_ATTR(cmdq_en,
> "%d\n", card->ext_csd.cmdq_en);
>
> +static int mmc_update_csd(struct mmc_card *card) {
> + int err = 0;
> +
> + mmc_claim_host(card->host);
> + err = mmc_read_ext_csd(card);
> + mmc_release_host(card->host);
> + return err;
> +}
> +
> +static ssize_t life_time_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf) {
> + int err = 0;
> + struct mmc_card *card = mmc_dev_to_card(dev);
> +
> + /* before eMMC v5 */
> + if (card->ext_csd.rev < 7)
> + return sprintf(buf, "%s\n", "-");
> +
> + /* eMMC v5 or later */
> + err = mmc_update_csd(card);
> + if (err)
> + return (ssize_t)err;
> +
> + return sprintf(buf, "0x%02x 0x%02x\n",
> + card->ext_csd.device_life_time_est_typ_a,
> +
> +card->ext_csd.device_life_time_est_typ_b);
> +}
> +
> +static DEVICE_ATTR_RO(life_time);
> +
> +static ssize_t pre_eol_info_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf) {
> + int err = 0;
> + struct mmc_card *card = mmc_dev_to_card(dev);
> +
> + /* before eMMC v5 */
> + if (card->ext_csd.rev < 7)
> + return sprintf(buf, "%s\n", "-");
> +
> + /* eMMC v5 or later */
> + err = mmc_update_csd(card);
> + if (err)
> + return (ssize_t)err;
> +
> + return sprintf(buf, "0x%02x\n", card->ext_csd.pre_eol_info); }
> +
> +static DEVICE_ATTR_RO(pre_eol_info);
> +
> static ssize_t mmc_fwrev_show(struct device *dev,
> struct device_attribute *attr,
> char *buf)
> --
> 2.20.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: [PATCH 2/2] mmc: core: add reliable write setting to sysfs and update on read
2022-03-09 10:40 ` [PATCH 2/2] mmc: core: add reliable write setting to sysfs and update on read Marc Mattmueller
@ 2022-03-10 14:08 ` Avri Altman
2022-03-15 9:39 ` Ulf Hansson
0 siblings, 1 reply; 8+ messages in thread
From: Avri Altman @ 2022-03-10 14:08 UTC (permalink / raw)
To: Marc Mattmueller, ulf.hansson, linux-mmc, linux-kernel
> The mmc reliable write setting (from ext_csd) was not available on the sysfs.
> Thus, added rel_param and rel_write_set to sysfs and added the update of
> rel_write_set on sysfs read.
Here also - why adding ABI when its already available via mmc-utils?
Thanks,
Avri
>
> Signed-off-by: Marc Mattmueller <marc.mattmueller@netmodule.com>
> ---
> drivers/mmc/core/mmc.c | 29 +++++++++++++++++++++++++++++
> include/linux/mmc/card.h | 1 +
> include/linux/mmc/mmc.h | 1 +
> 3 files changed, 31 insertions(+)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index
> d9537c894e33..a64d1ecb0de9 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -364,6 +364,10 @@ static int
> mmc_update_ext_csd_runtime_params(struct mmc_card *card, u8
> *ext_csd) {
> int err = 0;
>
> + /* eMMC v4.41 or later */
> + if (card->ext_csd.rev >= 5)
> + card->ext_csd.rel_wr_set = ext_csd[EXT_CSD_WR_REL_SET];
> +
> /* eMMC v5 or later */
> if (card->ext_csd.rev >= 7) {
> card->ext_csd.pre_eol_info = ext_csd[EXT_CSD_PRE_EOL_INFO];
> @@ -587,6 +591,7 @@ static int mmc_decode_ext_csd(struct mmc_card
> *card, u8 *ext_csd)
> }
>
> card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM];
> + card->ext_csd.rel_wr_set = ext_csd[EXT_CSD_WR_REL_SET];
> card->ext_csd.rst_n_function =
> ext_csd[EXT_CSD_RST_N_FUNCTION];
>
> /*
> @@ -820,6 +825,7 @@ MMC_DEV_ATTR(name, "%s\n", card-
> >cid.prod_name); MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
> MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv); MMC_DEV_ATTR(rev,
> "0x%x\n", card->ext_csd.rev);
> +MMC_DEV_ATTR(rel_param, "0x%02x\n", card->ext_csd.rel_param);
> MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
> MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
> card->ext_csd.enhanced_area_offset);
> @@ -886,6 +892,27 @@ static ssize_t pre_eol_info_show(struct device
> *dev,
>
> static DEVICE_ATTR_RO(pre_eol_info);
>
> +static ssize_t rel_write_set_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf) {
> + int err = 0;
> + struct mmc_card *card = mmc_dev_to_card(dev);
> +
> + /* before eMMC v4.41 */
> + if (card->ext_csd.rev < 5)
> + return sprintf(buf, "%s\n", "-");
> +
> + /* eMMC v4.41 or later */
> + err = mmc_update_csd(card);
> + if (err)
> + return (ssize_t)err;
> +
> + return sprintf(buf, "0x%02x\n", card->ext_csd.rel_wr_set); }
> +
> +static DEVICE_ATTR_RO(rel_write_set);
> +
> static ssize_t mmc_fwrev_show(struct device *dev,
> struct device_attribute *attr,
> char *buf) @@ -931,6 +958,8 @@ static struct attribute
> *mmc_std_attrs[] = {
> &dev_attr_oemid.attr,
> &dev_attr_prv.attr,
> &dev_attr_rev.attr,
> + &dev_attr_rel_param.attr,
> + &dev_attr_rel_write_set.attr,
> &dev_attr_pre_eol_info.attr,
> &dev_attr_life_time.attr,
> &dev_attr_serial.attr,
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index
> 37f975875102..21c47893fcb4 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -48,6 +48,7 @@ struct mmc_ext_csd {
> u8 sec_feature_support;
> u8 rel_sectors;
> u8 rel_param;
> + u8 rel_wr_set;
> bool enhanced_rpmb_supported;
> u8 part_config;
> u8 cache_ctrl;
> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index
> d9a65c6a8816..42afd442a70a 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -266,6 +266,7 @@ static inline bool mmc_ready_for_data(u32 status)
> #define EXT_CSD_BKOPS_START 164 /* W */
> #define EXT_CSD_SANITIZE_START 165 /* W */
> #define EXT_CSD_WR_REL_PARAM 166 /* RO */
> +#define EXT_CSD_WR_REL_SET 167 /* R/W */
> #define EXT_CSD_RPMB_MULT 168 /* RO */
> #define EXT_CSD_FW_CONFIG 169 /* R/W */
> #define EXT_CSD_BOOT_WP 173 /* R/W */
> --
> 2.20.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] mmc: core: add reliable write setting to sysfs and update on read
2022-03-10 14:08 ` Avri Altman
@ 2022-03-15 9:39 ` Ulf Hansson
2022-03-15 12:39 ` Marc Mattmüller
0 siblings, 1 reply; 8+ messages in thread
From: Ulf Hansson @ 2022-03-15 9:39 UTC (permalink / raw)
To: Avri Altman, Marc Mattmueller; +Cc: linux-mmc, linux-kernel
On Thu, 10 Mar 2022 at 15:08, Avri Altman <Avri.Altman@wdc.com> wrote:
>
>
> > The mmc reliable write setting (from ext_csd) was not available on the sysfs.
> > Thus, added rel_param and rel_write_set to sysfs and added the update of
> > rel_write_set on sysfs read.
> Here also - why adding ABI when its already available via mmc-utils?
>
> Thanks,
> Avri
FYI, I agree with Avri here. Please use mmc-utils.
In case the values in sysfs become confusing as they may be outdated
at some point, perhaps we should consider dropping them?
Kind regards
Uffe
>
> >
> > Signed-off-by: Marc Mattmueller <marc.mattmueller@netmodule.com>
> > ---
> > drivers/mmc/core/mmc.c | 29 +++++++++++++++++++++++++++++
> > include/linux/mmc/card.h | 1 +
> > include/linux/mmc/mmc.h | 1 +
> > 3 files changed, 31 insertions(+)
> >
> > diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index
> > d9537c894e33..a64d1ecb0de9 100644
> > --- a/drivers/mmc/core/mmc.c
> > +++ b/drivers/mmc/core/mmc.c
> > @@ -364,6 +364,10 @@ static int
> > mmc_update_ext_csd_runtime_params(struct mmc_card *card, u8
> > *ext_csd) {
> > int err = 0;
> >
> > + /* eMMC v4.41 or later */
> > + if (card->ext_csd.rev >= 5)
> > + card->ext_csd.rel_wr_set = ext_csd[EXT_CSD_WR_REL_SET];
> > +
> > /* eMMC v5 or later */
> > if (card->ext_csd.rev >= 7) {
> > card->ext_csd.pre_eol_info = ext_csd[EXT_CSD_PRE_EOL_INFO];
> > @@ -587,6 +591,7 @@ static int mmc_decode_ext_csd(struct mmc_card
> > *card, u8 *ext_csd)
> > }
> >
> > card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM];
> > + card->ext_csd.rel_wr_set = ext_csd[EXT_CSD_WR_REL_SET];
> > card->ext_csd.rst_n_function =
> > ext_csd[EXT_CSD_RST_N_FUNCTION];
> >
> > /*
> > @@ -820,6 +825,7 @@ MMC_DEV_ATTR(name, "%s\n", card-
> > >cid.prod_name); MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
> > MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv); MMC_DEV_ATTR(rev,
> > "0x%x\n", card->ext_csd.rev);
> > +MMC_DEV_ATTR(rel_param, "0x%02x\n", card->ext_csd.rel_param);
> > MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
> > MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
> > card->ext_csd.enhanced_area_offset);
> > @@ -886,6 +892,27 @@ static ssize_t pre_eol_info_show(struct device
> > *dev,
> >
> > static DEVICE_ATTR_RO(pre_eol_info);
> >
> > +static ssize_t rel_write_set_show(struct device *dev,
> > + struct device_attribute *attr,
> > + char *buf) {
> > + int err = 0;
> > + struct mmc_card *card = mmc_dev_to_card(dev);
> > +
> > + /* before eMMC v4.41 */
> > + if (card->ext_csd.rev < 5)
> > + return sprintf(buf, "%s\n", "-");
> > +
> > + /* eMMC v4.41 or later */
> > + err = mmc_update_csd(card);
> > + if (err)
> > + return (ssize_t)err;
> > +
> > + return sprintf(buf, "0x%02x\n", card->ext_csd.rel_wr_set); }
> > +
> > +static DEVICE_ATTR_RO(rel_write_set);
> > +
> > static ssize_t mmc_fwrev_show(struct device *dev,
> > struct device_attribute *attr,
> > char *buf) @@ -931,6 +958,8 @@ static struct attribute
> > *mmc_std_attrs[] = {
> > &dev_attr_oemid.attr,
> > &dev_attr_prv.attr,
> > &dev_attr_rev.attr,
> > + &dev_attr_rel_param.attr,
> > + &dev_attr_rel_write_set.attr,
> > &dev_attr_pre_eol_info.attr,
> > &dev_attr_life_time.attr,
> > &dev_attr_serial.attr,
> > diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index
> > 37f975875102..21c47893fcb4 100644
> > --- a/include/linux/mmc/card.h
> > +++ b/include/linux/mmc/card.h
> > @@ -48,6 +48,7 @@ struct mmc_ext_csd {
> > u8 sec_feature_support;
> > u8 rel_sectors;
> > u8 rel_param;
> > + u8 rel_wr_set;
> > bool enhanced_rpmb_supported;
> > u8 part_config;
> > u8 cache_ctrl;
> > diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index
> > d9a65c6a8816..42afd442a70a 100644
> > --- a/include/linux/mmc/mmc.h
> > +++ b/include/linux/mmc/mmc.h
> > @@ -266,6 +266,7 @@ static inline bool mmc_ready_for_data(u32 status)
> > #define EXT_CSD_BKOPS_START 164 /* W */
> > #define EXT_CSD_SANITIZE_START 165 /* W */
> > #define EXT_CSD_WR_REL_PARAM 166 /* RO */
> > +#define EXT_CSD_WR_REL_SET 167 /* R/W */
> > #define EXT_CSD_RPMB_MULT 168 /* RO */
> > #define EXT_CSD_FW_CONFIG 169 /* R/W */
> > #define EXT_CSD_BOOT_WP 173 /* R/W */
> > --
> > 2.20.1
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] mmc: core: add reliable write setting to sysfs and update on read
2022-03-15 9:39 ` Ulf Hansson
@ 2022-03-15 12:39 ` Marc Mattmüller
2022-03-15 13:41 ` Ulf Hansson
0 siblings, 1 reply; 8+ messages in thread
From: Marc Mattmüller @ 2022-03-15 12:39 UTC (permalink / raw)
To: ulf.hansson, avri.altman; +Cc: linux-mmc, linux-kernel
On Tue, 2022-03-15 at 10:39 +0100, Ulf Hansson wrote:
> On Thu, 10 Mar 2022 at 15:08, Avri Altman <Avri.Altman@wdc.com>
> wrote:
> >
> > > The mmc reliable write setting (from ext_csd) was not available
> > > on the sysfs.
> > > Thus, added rel_param and rel_write_set to sysfs and added the
> > > update of
> > > rel_write_set on sysfs read.
> > Here also - why adding ABI when its already available via mmc-
> > utils?
> >
> > Thanks,
> > Avri
>
> FYI, I agree with Avri here. Please use mmc-utils.
>
> In case the values in sysfs become confusing as they may be outdated
> at some point, perhaps we should consider dropping them?
>
> Kind regards
> Uffe
Hi,
yes I was confused about having the lifetime values available in the
sysfs but without having an update over time. The reliable write values
were some kind of logic for me to add them as well. That's why I was
hesitating first to create a single patch for all these values but as
it concerns two different topics I decided to create a patchset.
Nevertheless, if you propose to use the mmc-utils for the dynamic
values, it is less confusing if you just keep only the static
values and drop the dynamic ones.
Kind regards
Marc
>
> > > Signed-off-by: Marc Mattmueller <marc.mattmueller@netmodule.com>
> > > ---
> > > drivers/mmc/core/mmc.c | 29 +++++++++++++++++++++++++++++
> > > include/linux/mmc/card.h | 1 +
> > > include/linux/mmc/mmc.h | 1 +
> > > 3 files changed, 31 insertions(+)
> > >
> > > diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> > > index
> > > d9537c894e33..a64d1ecb0de9 100644
> > > --- a/drivers/mmc/core/mmc.c
> > > +++ b/drivers/mmc/core/mmc.c
> > > @@ -364,6 +364,10 @@ static int
> > > mmc_update_ext_csd_runtime_params(struct mmc_card *card, u8
> > > *ext_csd) {
> > > int err = 0;
> > >
> > > + /* eMMC v4.41 or later */
> > > + if (card->ext_csd.rev >= 5)
> > > + card->ext_csd.rel_wr_set =
> > > ext_csd[EXT_CSD_WR_REL_SET];
> > > +
> > > /* eMMC v5 or later */
> > > if (card->ext_csd.rev >= 7) {
> > > card->ext_csd.pre_eol_info =
> > > ext_csd[EXT_CSD_PRE_EOL_INFO];
> > > @@ -587,6 +591,7 @@ static int mmc_decode_ext_csd(struct mmc_card
> > > *card, u8 *ext_csd)
> > > }
> > >
> > > card->ext_csd.rel_param =
> > > ext_csd[EXT_CSD_WR_REL_PARAM];
> > > + card->ext_csd.rel_wr_set =
> > > ext_csd[EXT_CSD_WR_REL_SET];
> > > card->ext_csd.rst_n_function =
> > > ext_csd[EXT_CSD_RST_N_FUNCTION];
> > >
> > > /*
> > > @@ -820,6 +825,7 @@ MMC_DEV_ATTR(name, "%s\n", card-
> > > > cid.prod_name); MMC_DEV_ATTR(oemid, "0x%04x\n", card-
> > > > >cid.oemid);
> > > MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv); MMC_DEV_ATTR(rev,
> > > "0x%x\n", card->ext_csd.rev);
> > > +MMC_DEV_ATTR(rel_param, "0x%02x\n", card->ext_csd.rel_param);
> > > MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
> > > MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
> > > card->ext_csd.enhanced_area_offset);
> > > @@ -886,6 +892,27 @@ static ssize_t pre_eol_info_show(struct
> > > device
> > > *dev,
> > >
> > > static DEVICE_ATTR_RO(pre_eol_info);
> > >
> > > +static ssize_t rel_write_set_show(struct device *dev,
> > > + struct device_attribute *attr,
> > > + char *buf) {
> > > + int err = 0;
> > > + struct mmc_card *card = mmc_dev_to_card(dev);
> > > +
> > > + /* before eMMC v4.41 */
> > > + if (card->ext_csd.rev < 5)
> > > + return sprintf(buf, "%s\n", "-");
> > > +
> > > + /* eMMC v4.41 or later */
> > > + err = mmc_update_csd(card);
> > > + if (err)
> > > + return (ssize_t)err;
> > > +
> > > + return sprintf(buf, "0x%02x\n", card-
> > > >ext_csd.rel_wr_set); }
> > > +
> > > +static DEVICE_ATTR_RO(rel_write_set);
> > > +
> > > static ssize_t mmc_fwrev_show(struct device *dev,
> > > struct device_attribute *attr,
> > > char *buf) @@ -931,6 +958,8 @@
> > > static struct attribute
> > > *mmc_std_attrs[] = {
> > > &dev_attr_oemid.attr,
> > > &dev_attr_prv.attr,
> > > &dev_attr_rev.attr,
> > > + &dev_attr_rel_param.attr,
> > > + &dev_attr_rel_write_set.attr,
> > > &dev_attr_pre_eol_info.attr,
> > > &dev_attr_life_time.attr,
> > > &dev_attr_serial.attr,
> > > diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> > > index
> > > 37f975875102..21c47893fcb4 100644
> > > --- a/include/linux/mmc/card.h
> > > +++ b/include/linux/mmc/card.h
> > > @@ -48,6 +48,7 @@ struct mmc_ext_csd {
> > > u8 sec_feature_support;
> > > u8 rel_sectors;
> > > u8 rel_param;
> > > + u8 rel_wr_set;
> > > bool enhanced_rpmb_supported;
> > > u8 part_config;
> > > u8 cache_ctrl;
> > > diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> > > index
> > > d9a65c6a8816..42afd442a70a 100644
> > > --- a/include/linux/mmc/mmc.h
> > > +++ b/include/linux/mmc/mmc.h
> > > @@ -266,6 +266,7 @@ static inline bool mmc_ready_for_data(u32
> > > status)
> > > #define EXT_CSD_BKOPS_START 164 /* W */
> > > #define EXT_CSD_SANITIZE_START 165 /* W */
> > > #define EXT_CSD_WR_REL_PARAM 166 /* RO */
> > > +#define EXT_CSD_WR_REL_SET 167 /* R/W */
> > > #define EXT_CSD_RPMB_MULT 168 /* RO */
> > > #define EXT_CSD_FW_CONFIG 169 /* R/W */
> > > #define EXT_CSD_BOOT_WP 173 /* R/W */
> > > --
> > > 2.20.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] mmc: core: add reliable write setting to sysfs and update on read
2022-03-15 12:39 ` Marc Mattmüller
@ 2022-03-15 13:41 ` Ulf Hansson
0 siblings, 0 replies; 8+ messages in thread
From: Ulf Hansson @ 2022-03-15 13:41 UTC (permalink / raw)
To: Marc Mattmüller; +Cc: avri.altman, linux-mmc, linux-kernel
On Tue, 15 Mar 2022 at 13:40, Marc Mattmüller
<Marc.Mattmueller@netmodule.com> wrote:
>
> On Tue, 2022-03-15 at 10:39 +0100, Ulf Hansson wrote:
> > On Thu, 10 Mar 2022 at 15:08, Avri Altman <Avri.Altman@wdc.com>
> > wrote:
> > >
> > > > The mmc reliable write setting (from ext_csd) was not available
> > > > on the sysfs.
> > > > Thus, added rel_param and rel_write_set to sysfs and added the
> > > > update of
> > > > rel_write_set on sysfs read.
> > > Here also - why adding ABI when its already available via mmc-
> > > utils?
> > >
> > > Thanks,
> > > Avri
> >
> > FYI, I agree with Avri here. Please use mmc-utils.
> >
> > In case the values in sysfs become confusing as they may be outdated
> > at some point, perhaps we should consider dropping them?
> >
> > Kind regards
> > Uffe
>
> Hi,
> yes I was confused about having the lifetime values available in the
> sysfs but without having an update over time. The reliable write values
> were some kind of logic for me to add them as well. That's why I was
> hesitating first to create a single patch for all these values but as
> it concerns two different topics I decided to create a patchset.
>
> Nevertheless, if you propose to use the mmc-utils for the dynamic
> values, it is less confusing if you just keep only the static
> values and drop the dynamic ones.
Okay, that sounds reasonable - and thanks for clarifying.
Kind regards
Uffe
>
> Kind regards
> Marc
>
> >
> > > > Signed-off-by: Marc Mattmueller <marc.mattmueller@netmodule.com>
> > > > ---
> > > > drivers/mmc/core/mmc.c | 29 +++++++++++++++++++++++++++++
> > > > include/linux/mmc/card.h | 1 +
> > > > include/linux/mmc/mmc.h | 1 +
> > > > 3 files changed, 31 insertions(+)
> > > >
> > > > diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> > > > index
> > > > d9537c894e33..a64d1ecb0de9 100644
> > > > --- a/drivers/mmc/core/mmc.c
> > > > +++ b/drivers/mmc/core/mmc.c
> > > > @@ -364,6 +364,10 @@ static int
> > > > mmc_update_ext_csd_runtime_params(struct mmc_card *card, u8
> > > > *ext_csd) {
> > > > int err = 0;
> > > >
> > > > + /* eMMC v4.41 or later */
> > > > + if (card->ext_csd.rev >= 5)
> > > > + card->ext_csd.rel_wr_set =
> > > > ext_csd[EXT_CSD_WR_REL_SET];
> > > > +
> > > > /* eMMC v5 or later */
> > > > if (card->ext_csd.rev >= 7) {
> > > > card->ext_csd.pre_eol_info =
> > > > ext_csd[EXT_CSD_PRE_EOL_INFO];
> > > > @@ -587,6 +591,7 @@ static int mmc_decode_ext_csd(struct mmc_card
> > > > *card, u8 *ext_csd)
> > > > }
> > > >
> > > > card->ext_csd.rel_param =
> > > > ext_csd[EXT_CSD_WR_REL_PARAM];
> > > > + card->ext_csd.rel_wr_set =
> > > > ext_csd[EXT_CSD_WR_REL_SET];
> > > > card->ext_csd.rst_n_function =
> > > > ext_csd[EXT_CSD_RST_N_FUNCTION];
> > > >
> > > > /*
> > > > @@ -820,6 +825,7 @@ MMC_DEV_ATTR(name, "%s\n", card-
> > > > > cid.prod_name); MMC_DEV_ATTR(oemid, "0x%04x\n", card-
> > > > > >cid.oemid);
> > > > MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv); MMC_DEV_ATTR(rev,
> > > > "0x%x\n", card->ext_csd.rev);
> > > > +MMC_DEV_ATTR(rel_param, "0x%02x\n", card->ext_csd.rel_param);
> > > > MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
> > > > MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
> > > > card->ext_csd.enhanced_area_offset);
> > > > @@ -886,6 +892,27 @@ static ssize_t pre_eol_info_show(struct
> > > > device
> > > > *dev,
> > > >
> > > > static DEVICE_ATTR_RO(pre_eol_info);
> > > >
> > > > +static ssize_t rel_write_set_show(struct device *dev,
> > > > + struct device_attribute *attr,
> > > > + char *buf) {
> > > > + int err = 0;
> > > > + struct mmc_card *card = mmc_dev_to_card(dev);
> > > > +
> > > > + /* before eMMC v4.41 */
> > > > + if (card->ext_csd.rev < 5)
> > > > + return sprintf(buf, "%s\n", "-");
> > > > +
> > > > + /* eMMC v4.41 or later */
> > > > + err = mmc_update_csd(card);
> > > > + if (err)
> > > > + return (ssize_t)err;
> > > > +
> > > > + return sprintf(buf, "0x%02x\n", card-
> > > > >ext_csd.rel_wr_set); }
> > > > +
> > > > +static DEVICE_ATTR_RO(rel_write_set);
> > > > +
> > > > static ssize_t mmc_fwrev_show(struct device *dev,
> > > > struct device_attribute *attr,
> > > > char *buf) @@ -931,6 +958,8 @@
> > > > static struct attribute
> > > > *mmc_std_attrs[] = {
> > > > &dev_attr_oemid.attr,
> > > > &dev_attr_prv.attr,
> > > > &dev_attr_rev.attr,
> > > > + &dev_attr_rel_param.attr,
> > > > + &dev_attr_rel_write_set.attr,
> > > > &dev_attr_pre_eol_info.attr,
> > > > &dev_attr_life_time.attr,
> > > > &dev_attr_serial.attr,
> > > > diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> > > > index
> > > > 37f975875102..21c47893fcb4 100644
> > > > --- a/include/linux/mmc/card.h
> > > > +++ b/include/linux/mmc/card.h
> > > > @@ -48,6 +48,7 @@ struct mmc_ext_csd {
> > > > u8 sec_feature_support;
> > > > u8 rel_sectors;
> > > > u8 rel_param;
> > > > + u8 rel_wr_set;
> > > > bool enhanced_rpmb_supported;
> > > > u8 part_config;
> > > > u8 cache_ctrl;
> > > > diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> > > > index
> > > > d9a65c6a8816..42afd442a70a 100644
> > > > --- a/include/linux/mmc/mmc.h
> > > > +++ b/include/linux/mmc/mmc.h
> > > > @@ -266,6 +266,7 @@ static inline bool mmc_ready_for_data(u32
> > > > status)
> > > > #define EXT_CSD_BKOPS_START 164 /* W */
> > > > #define EXT_CSD_SANITIZE_START 165 /* W */
> > > > #define EXT_CSD_WR_REL_PARAM 166 /* RO */
> > > > +#define EXT_CSD_WR_REL_SET 167 /* R/W */
> > > > #define EXT_CSD_RPMB_MULT 168 /* RO */
> > > > #define EXT_CSD_FW_CONFIG 169 /* R/W */
> > > > #define EXT_CSD_BOOT_WP 173 /* R/W */
> > > > --
> > > > 2.20.1
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-03-15 13:42 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-09 10:40 [PATCH 0/2] mmc: update life time and rel write on sysfs read Marc Mattmueller
2022-03-09 10:40 ` [PATCH 1/2] mmc: core: update life time and pre eol info values " Marc Mattmueller
2022-03-10 14:07 ` Avri Altman
2022-03-09 10:40 ` [PATCH 2/2] mmc: core: add reliable write setting to sysfs and update on read Marc Mattmueller
2022-03-10 14:08 ` Avri Altman
2022-03-15 9:39 ` Ulf Hansson
2022-03-15 12:39 ` Marc Mattmüller
2022-03-15 13:41 ` Ulf Hansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).