Re: [PATCH 1/2] mmc: block: Issue flush only if allowed

Re: [PATCH 1/2] mmc: block: Issue flush only if allowed

[Avri Altman]

>> @@ -1473,6 +1473,9 @@ static int mmc_blk_cqe_issue_flush(struct mmc_queue *mq, struct request *req)
>>  	struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req);
>>  	struct mmc_request *mrq = mmc_blk_cqe_prep_dcmd(mqrq, req);
>>  
>> +	if (mmc_card_mmc(mq->card) && !mmc_flush_allowed(mq->card))
>> +		return 0;

> Returning 0 means the flush was issued successfully. i.e. it is in
> flight.
>
> Instead, a call to blk_mq_end_request(req, BLK_STS_OK) is needed,
> and mmc_blk_mq_issue_rq() must be amended so that it will return
> MMC_REQ_DONE for this case.
Done.

Thanks,
Avri

[PATCH 0/2] Do not flush cache when it is disabled

[Avri Altman]

Cache is a temporary storage space in an eMMC device. Volatile by
nature, the cache should in typical case reduce the access time compared
to an access to the main nonvolatile storage.

The cache function can be turned ON and OFF. Once OFF, the host is not
expected to issue a flush-cache command to the device.


Avri Altman (2):
  mmc: block: Issue flush only if allowed
  mmc: block: Update ext_csd.cache_ctrl if it was written

 drivers/mmc/core/block.c   | 11 +++++++++++
 drivers/mmc/core/mmc_ops.c |  4 +---
 drivers/mmc/core/mmc_ops.h |  5 +++++
 3 files changed, 17 insertions(+), 3 deletions(-)

-- 
2.25.1

[PATCH 1/2] mmc: block: Issue flush only if allowed

[Avri Altman]

The cache may be flushed to the nonvolatile storage by writing to
FLUSH_CACHE byte (EXT_CSD byte [32]). When in command queueing mode, the
cache may be flushed by issuing a CMDQ_TASK_ DEV_MGMT (CMD48) with a
FLUSH_CACHE op-code.  Either way, verify that The cache function is
turned ON before doing so.

fixes: 1e8e55b67030 (mmc: block: Add CQE support)

Reported-by: Brendan Peter <bpeter@lytx.com>
Tested-by: Brendan Peter <bpeter@lytx.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
---
 drivers/mmc/core/block.c   | 3 +++
 drivers/mmc/core/mmc_ops.c | 4 +---
 drivers/mmc/core/mmc_ops.h | 5 +++++
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 42e27a298218..a93c66aa91db 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1473,6 +1473,9 @@ static int mmc_blk_cqe_issue_flush(struct mmc_queue *mq, struct request *req)
 	struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req);
 	struct mmc_request *mrq = mmc_blk_cqe_prep_dcmd(mqrq, req);
 
+	if (mmc_card_mmc(mq->card) && !mmc_flush_allowed(mq->card))
+		return 0;
+
 	mrq->cmd->opcode = MMC_SWITCH;
 	mrq->cmd->arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
 			(EXT_CSD_FLUSH_CACHE << 16) |
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index baa6314f69b4..b8a0c9ac8a20 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -988,9 +988,7 @@ int mmc_flush_cache(struct mmc_card *card)
 {
 	int err = 0;
 
-	if (mmc_card_mmc(card) &&
-			(card->ext_csd.cache_size > 0) &&
-			(card->ext_csd.cache_ctrl & 1)) {
+	if (mmc_card_mmc(card) && mmc_flush_allowed(card)) {
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 				 EXT_CSD_FLUSH_CACHE, 1,
 				 MMC_CACHE_FLUSH_TIMEOUT_MS);
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index 632009260e51..bf2b315addd7 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -19,6 +19,11 @@ enum mmc_busy_cmd {
 struct mmc_host;
 struct mmc_card;
 
+static inline bool mmc_flush_allowed(struct mmc_card *card)
+{
+	return card->ext_csd.cache_size > 0 && (card->ext_csd.cache_ctrl & 1);
+}
+
 int mmc_select_card(struct mmc_card *card);
 int mmc_deselect_cards(struct mmc_host *host);
 int mmc_set_dsr(struct mmc_host *host);
-- 
2.25.1

Re: [PATCH 1/2] mmc: block: Issue flush only if allowed

[Adrian Hunter]

On 22/03/21 3:36 pm, Avri Altman wrote:
> The cache may be flushed to the nonvolatile storage by writing to
> FLUSH_CACHE byte (EXT_CSD byte [32]). When in command queueing mode, the
> cache may be flushed by issuing a CMDQ_TASK_ DEV_MGMT (CMD48) with a
> FLUSH_CACHE op-code.  Either way, verify that The cache function is
> turned ON before doing so.
> 
> fixes: 1e8e55b67030 (mmc: block: Add CQE support)
> 
> Reported-by: Brendan Peter <bpeter@lytx.com>
> Tested-by: Brendan Peter <bpeter@lytx.com>
> Signed-off-by: Avri Altman <avri.altman@wdc.com>
> ---
>  drivers/mmc/core/block.c   | 3 +++
>  drivers/mmc/core/mmc_ops.c | 4 +---
>  drivers/mmc/core/mmc_ops.h | 5 +++++
>  3 files changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> index 42e27a298218..a93c66aa91db 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -1473,6 +1473,9 @@ static int mmc_blk_cqe_issue_flush(struct mmc_queue *mq, struct request *req)
>  	struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req);
>  	struct mmc_request *mrq = mmc_blk_cqe_prep_dcmd(mqrq, req);
>  
> +	if (mmc_card_mmc(mq->card) && !mmc_flush_allowed(mq->card))
> +		return 0;

Returning 0 means the flush was issued successfully. i.e. it is in
flight.

Instead, a call to blk_mq_end_request(req, BLK_STS_OK) is needed,
and mmc_blk_mq_issue_rq() must be amended so that it will return
MMC_REQ_DONE for this case.

> +
>  	mrq->cmd->opcode = MMC_SWITCH;
>  	mrq->cmd->arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
>  			(EXT_CSD_FLUSH_CACHE << 16) |
> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
> index baa6314f69b4..b8a0c9ac8a20 100644
> --- a/drivers/mmc/core/mmc_ops.c
> +++ b/drivers/mmc/core/mmc_ops.c
> @@ -988,9 +988,7 @@ int mmc_flush_cache(struct mmc_card *card)
>  {
>  	int err = 0;
>  
> -	if (mmc_card_mmc(card) &&
> -			(card->ext_csd.cache_size > 0) &&
> -			(card->ext_csd.cache_ctrl & 1)) {
> +	if (mmc_card_mmc(card) && mmc_flush_allowed(card)) {
>  		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>  				 EXT_CSD_FLUSH_CACHE, 1,
>  				 MMC_CACHE_FLUSH_TIMEOUT_MS);
> diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
> index 632009260e51..bf2b315addd7 100644
> --- a/drivers/mmc/core/mmc_ops.h
> +++ b/drivers/mmc/core/mmc_ops.h
> @@ -19,6 +19,11 @@ enum mmc_busy_cmd {
>  struct mmc_host;
>  struct mmc_card;
>  
> +static inline bool mmc_flush_allowed(struct mmc_card *card)
> +{
> +	return card->ext_csd.cache_size > 0 && (card->ext_csd.cache_ctrl & 1);
> +}
> +
>  int mmc_select_card(struct mmc_card *card);
>  int mmc_deselect_cards(struct mmc_host *host);
>  int mmc_set_dsr(struct mmc_host *host);
>