* Applied "regulator: 88pm800: Use regulator_nodes/of_match in the descriptor" to the regulator tree
@ 2015-07-16 21:01 Mark Brown
0 siblings, 0 replies; only message in thread
From: Mark Brown @ 2015-07-16 21:01 UTC (permalink / raw)
To: Vaibhav Hiremath, Mark Brown; +Cc: linux-kernel
The patch
regulator: 88pm800: Use regulator_nodes/of_match in the descriptor
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From fa26e4d2b3cf1c84f20fbc003501bb028f682d92 Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Date: Thu, 16 Jul 2015 23:46:56 +0530
Subject: [PATCH] regulator: 88pm800: Use regulator_nodes/of_match in the
descriptor
This patch is add regulator_nodes/of_match in the regulator
descriptor for using information from DT instead of specific codes.
With this patch, driver gets simplified,
- No need to maintain "struct of_regulator_match" table
and call of_regulator_match() fn.
- No need for pm800_regulator_dt_init() fn, as it was only
used for of_regulator_match().
- probe() fn got simplified around regulator_config and regulator_desc
initialization.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/88pm800.c | 143 ++++++++++++++------------------------------
1 file changed, 44 insertions(+), 99 deletions(-)
diff --git a/drivers/regulator/88pm800.c b/drivers/regulator/88pm800.c
index 3b37170..26c277f 100644
--- a/drivers/regulator/88pm800.c
+++ b/drivers/regulator/88pm800.c
@@ -91,10 +91,12 @@ struct pm800_regulators {
* not the constant voltage table.
* n_volt - Number of available selectors
*/
-#define PM800_BUCK(vreg, ereg, ebit, amax, volt_ranges, n_volt) \
+#define PM800_BUCK(match, vreg, ereg, ebit, amax, volt_ranges, n_volt) \
{ \
.desc = { \
.name = #vreg, \
+ .of_match = of_match_ptr(#match), \
+ .regulators_node = of_match_ptr("regulators"), \
.ops = &pm800_volt_range_ops, \
.type = REGULATOR_VOLTAGE, \
.id = PM800_ID_##vreg, \
@@ -119,10 +121,12 @@ struct pm800_regulators {
* For all the LDOes, there are too many ranges. Using volt_table will be
* simpler and faster.
*/
-#define PM800_LDO(vreg, ereg, ebit, amax, ldo_volt_table) \
+#define PM800_LDO(match, vreg, ereg, ebit, amax, ldo_volt_table) \
{ \
.desc = { \
.name = #vreg, \
+ .of_match = of_match_ptr(#match), \
+ .regulators_node = of_match_ptr("regulators"), \
.ops = &pm800_volt_table_ops, \
.type = REGULATOR_VOLTAGE, \
.id = PM800_ID_##vreg, \
@@ -200,99 +204,43 @@ static struct regulator_ops pm800_volt_table_ops = {
/* The array is indexed by id(PM800_ID_XXX) */
static struct pm800_regulator_info pm800_regulator_info[] = {
- PM800_BUCK(BUCK1, BUCK_ENA, 0, 3000000, buck1_volt_range, 0x55),
- PM800_BUCK(BUCK2, BUCK_ENA, 1, 1200000, buck2_5_volt_range, 0x73),
- PM800_BUCK(BUCK3, BUCK_ENA, 2, 1200000, buck2_5_volt_range, 0x73),
- PM800_BUCK(BUCK4, BUCK_ENA, 3, 1200000, buck2_5_volt_range, 0x73),
- PM800_BUCK(BUCK5, BUCK_ENA, 4, 1200000, buck2_5_volt_range, 0x73),
-
- PM800_LDO(LDO1, LDO_ENA1_1, 0, 200000, ldo1_volt_table),
- PM800_LDO(LDO2, LDO_ENA1_1, 1, 10000, ldo2_volt_table),
- PM800_LDO(LDO3, LDO_ENA1_1, 2, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO4, LDO_ENA1_1, 3, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO5, LDO_ENA1_1, 4, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO6, LDO_ENA1_1, 5, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO7, LDO_ENA1_1, 6, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO8, LDO_ENA1_1, 7, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO9, LDO_ENA1_2, 0, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO10, LDO_ENA1_2, 1, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO11, LDO_ENA1_2, 2, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO12, LDO_ENA1_2, 3, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO13, LDO_ENA1_2, 4, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO14, LDO_ENA1_2, 5, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO15, LDO_ENA1_2, 6, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO16, LDO_ENA1_2, 7, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO17, LDO_ENA1_3, 0, 300000, ldo3_17_volt_table),
- PM800_LDO(LDO18, LDO_ENA1_3, 1, 200000, ldo18_19_volt_table),
- PM800_LDO(LDO19, LDO_ENA1_3, 2, 200000, ldo18_19_volt_table),
+ PM800_BUCK(buck1, BUCK1, BUCK_ENA, 0, 3000000, buck1_volt_range, 0x55),
+ PM800_BUCK(buck2, BUCK2, BUCK_ENA, 1, 1200000, buck2_5_volt_range, 0x73),
+ PM800_BUCK(buck3, BUCK3, BUCK_ENA, 2, 1200000, buck2_5_volt_range, 0x73),
+ PM800_BUCK(buck4, BUCK4, BUCK_ENA, 3, 1200000, buck2_5_volt_range, 0x73),
+ PM800_BUCK(buck5, BUCK5, BUCK_ENA, 4, 1200000, buck2_5_volt_range, 0x73),
+
+ PM800_LDO(ldo1, LDO1, LDO_ENA1_1, 0, 200000, ldo1_volt_table),
+ PM800_LDO(ldo2, LDO2, LDO_ENA1_1, 1, 10000, ldo2_volt_table),
+ PM800_LDO(ldo3, LDO3, LDO_ENA1_1, 2, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo4, LDO4, LDO_ENA1_1, 3, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo5, LDO5, LDO_ENA1_1, 4, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo6, LDO6, LDO_ENA1_1, 5, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo7, LDO7, LDO_ENA1_1, 6, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo8, LDO8, LDO_ENA1_1, 7, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo9, LDO9, LDO_ENA1_2, 0, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo10, LDO10, LDO_ENA1_2, 1, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo11, LDO11, LDO_ENA1_2, 2, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo12, LDO12, LDO_ENA1_2, 3, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo13, LDO13, LDO_ENA1_2, 4, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo14, LDO14, LDO_ENA1_2, 5, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo15, LDO15, LDO_ENA1_2, 6, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo16, LDO16, LDO_ENA1_2, 7, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo17, LDO17, LDO_ENA1_3, 0, 300000, ldo3_17_volt_table),
+ PM800_LDO(ldo18, LDO18, LDO_ENA1_3, 1, 200000, ldo18_19_volt_table),
+ PM800_LDO(ldo19, LDO19, LDO_ENA1_3, 2, 200000, ldo18_19_volt_table),
};
-#define PM800_REGULATOR_OF_MATCH(_name, _id) \
- [PM800_ID_##_id] = { \
- .name = #_name, \
- .driver_data = &pm800_regulator_info[PM800_ID_##_id], \
- }
-
-static struct of_regulator_match pm800_regulator_matches[] = {
- PM800_REGULATOR_OF_MATCH(buck1, BUCK1),
- PM800_REGULATOR_OF_MATCH(buck2, BUCK2),
- PM800_REGULATOR_OF_MATCH(buck3, BUCK3),
- PM800_REGULATOR_OF_MATCH(buck4, BUCK4),
- PM800_REGULATOR_OF_MATCH(buck5, BUCK5),
- PM800_REGULATOR_OF_MATCH(ldo1, LDO1),
- PM800_REGULATOR_OF_MATCH(ldo2, LDO2),
- PM800_REGULATOR_OF_MATCH(ldo3, LDO3),
- PM800_REGULATOR_OF_MATCH(ldo4, LDO4),
- PM800_REGULATOR_OF_MATCH(ldo5, LDO5),
- PM800_REGULATOR_OF_MATCH(ldo6, LDO6),
- PM800_REGULATOR_OF_MATCH(ldo7, LDO7),
- PM800_REGULATOR_OF_MATCH(ldo8, LDO8),
- PM800_REGULATOR_OF_MATCH(ldo9, LDO9),
- PM800_REGULATOR_OF_MATCH(ldo10, LDO10),
- PM800_REGULATOR_OF_MATCH(ldo11, LDO11),
- PM800_REGULATOR_OF_MATCH(ldo12, LDO12),
- PM800_REGULATOR_OF_MATCH(ldo13, LDO13),
- PM800_REGULATOR_OF_MATCH(ldo14, LDO14),
- PM800_REGULATOR_OF_MATCH(ldo15, LDO15),
- PM800_REGULATOR_OF_MATCH(ldo16, LDO16),
- PM800_REGULATOR_OF_MATCH(ldo17, LDO17),
- PM800_REGULATOR_OF_MATCH(ldo18, LDO18),
- PM800_REGULATOR_OF_MATCH(ldo19, LDO19),
-};
-
-static int pm800_regulator_dt_init(struct platform_device *pdev)
-{
- struct device_node *np = pdev->dev.of_node;
- int ret;
-
- ret = of_regulator_match(&pdev->dev, np,
- pm800_regulator_matches,
- ARRAY_SIZE(pm800_regulator_matches));
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
static int pm800_regulator_probe(struct platform_device *pdev)
{
struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
struct pm80x_platform_data *pdata = dev_get_platdata(pdev->dev.parent);
struct pm800_regulators *pm800_data;
- struct pm800_regulator_info *info;
struct regulator_config config = { };
struct regulator_init_data *init_data;
int i, ret;
- if (!pdata || pdata->num_regulators == 0) {
- if (IS_ENABLED(CONFIG_OF)) {
- ret = pm800_regulator_dt_init(pdev);
- if (ret)
- return ret;
- } else {
- return -ENODEV;
- }
- } else if (pdata->num_regulators) {
+ if (pdata && pdata->num_regulators) {
unsigned int count = 0;
/* Check whether num_regulator is valid. */
@@ -302,8 +250,6 @@ static int pm800_regulator_probe(struct platform_device *pdev)
}
if (count != pdata->num_regulators)
return -EINVAL;
- } else {
- return -EINVAL;
}
pm800_data = devm_kzalloc(&pdev->dev, sizeof(*pm800_data),
@@ -316,28 +262,27 @@ static int pm800_regulator_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pm800_data);
+ config.dev = chip->dev;
+ config.regmap = pm800_data->map;
for (i = 0; i < PM800_ID_RG_MAX; i++) {
struct regulator_dev *regulator;
- if (!pdata || pdata->num_regulators == 0)
- init_data = pm800_regulator_matches[i].init_data;
- else
+ if (pdata && pdata->num_regulators) {
init_data = pdata->regulators[i];
- if (!init_data)
- continue;
- info = pm800_regulator_matches[i].driver_data;
- config.dev = &pdev->dev;
- config.init_data = init_data;
- config.driver_data = info;
- config.regmap = pm800_data->map;
- config.of_node = pm800_regulator_matches[i].of_node;
+ if (!init_data)
+ continue;
+
+ config.init_data = init_data;
+ }
+
+ config.driver_data = &pm800_regulator_info[i];
regulator = devm_regulator_register(&pdev->dev,
- &info->desc, &config);
+ &pm800_regulator_info[i].desc, &config);
if (IS_ERR(regulator)) {
ret = PTR_ERR(regulator);
dev_err(&pdev->dev, "Failed to register %s\n",
- info->desc.name);
+ pm800_regulator_info[i].desc.name);
return ret;
}
}
--
2.1.4
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2015-07-16 21:03 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-07-16 21:01 Applied "regulator: 88pm800: Use regulator_nodes/of_match in the descriptor" to the regulator tree Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).