* [alsa-devel] [PATCH] ASoC: codecs: Add DA9055 codec driver
@ 2012-09-11 15:03 Ashish Chavan
2012-09-12 2:57 ` Mark Brown
0 siblings, 1 reply; 7+ messages in thread
From: Ashish Chavan @ 2012-09-11 15:03 UTC (permalink / raw)
To: Mark Brown, lrg, alsa-devel; +Cc: David Dajun Chen, linux-kernel
This patch adds support for Dialog semiconductor's DA9055 audio codec.
This has been tested on DA9055 EVB with Samsung SMDK6410 board.
Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com>
Signed-off-by: David Dajun Chen <david.chen@diasemi.com>
---
sound/soc/codecs/Kconfig | 4 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/da9055.c | 1507 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1513 insertions(+), 0 deletions(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 3684255..b92759a 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -37,6 +37,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_CX20442
select SND_SOC_DA7210 if I2C
select SND_SOC_DA732X if I2C
+ select SND_SOC_DA9055 if I2C
select SND_SOC_DFBMCS320
select SND_SOC_ISABELLE if I2C
select SND_SOC_JZ4740_CODEC
@@ -239,6 +240,9 @@ config SND_SOC_DA7210
config SND_SOC_DA732X
tristate
+config SND_SOC_DA9055
+ tristate
+
config SND_SOC_DFBMCS320
tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index ca508b2..9bd4d95 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -24,6 +24,7 @@ snd-soc-cs4271-objs := cs4271.o
snd-soc-cx20442-objs := cx20442.o
snd-soc-da7210-objs := da7210.o
snd-soc-da732x-objs := da732x.o
+snd-soc-da9055-objs := da9055.o
snd-soc-dfbmcs320-objs := dfbmcs320.o
snd-soc-dmic-objs := dmic.o
snd-soc-isabelle-objs := isabelle.o
@@ -144,6 +145,7 @@ obj-$(CONFIG_SND_SOC_CS4271) += snd-soc-cs4271.o
obj-$(CONFIG_SND_SOC_CX20442) += snd-soc-cx20442.o
obj-$(CONFIG_SND_SOC_DA7210) += snd-soc-da7210.o
obj-$(CONFIG_SND_SOC_DA732X) += snd-soc-da732x.o
+obj-$(CONFIG_SND_SOC_DA9055) += snd-soc-da9055.o
obj-$(CONFIG_SND_SOC_DFBMCS320) += snd-soc-dfbmcs320.o
obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o
obj-$(CONFIG_SND_SOC_ISABELLE) += snd-soc-isabelle.o
diff --git a/sound/soc/codecs/da9055.c b/sound/soc/codecs/da9055.c
new file mode 100644
index 0000000..be5c9e6
--- /dev/null
+++ b/sound/soc/codecs/da9055.c
@@ -0,0 +1,1507 @@
+/*
+ * DA9055 ALSA Soc codec driver
+ *
+ * Copyright (c) 2012 Dialog Semiconductor
+ *
+ * Tested on (Samsung SMDK6410 board + DA9055 EVB) using I2S and I2C
+ * Written by David Chen <david.chen@diasemi.com> and
+ * Ashish Chavan <ashish.chavan@kpitcummins.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+/* DA9055 register space */
+
+/* Status Registers */
+#define DA9055_STATUS1 0x02
+#define DA9055_PLL_STATUS 0x03
+#define DA9055_AUX_L_GAIN_STATUS 0x04
+#define DA9055_AUX_R_GAIN_STATUS 0x05
+#define DA9055_MIC_L_GAIN_STATUS 0x06
+#define DA9055_MIC_R_GAIN_STATUS 0x07
+#define DA9055_MIXIN_L_GAIN_STATUS 0x08
+#define DA9055_MIXIN_R_GAIN_STATUS 0x09
+#define DA9055_ADC_L_GAIN_STATUS 0x0A
+#define DA9055_ADC_R_GAIN_STATUS 0x0B
+#define DA9055_DAC_L_GAIN_STATUS 0x0C
+#define DA9055_DAC_R_GAIN_STATUS 0x0D
+#define DA9055_HP_L_GAIN_STATUS 0x0E
+#define DA9055_HP_R_GAIN_STATUS 0x0F
+#define DA9055_LINE_GAIN_STATUS 0x10
+
+/* System Initialisation Registers */
+#define DA9055_CIF_CTRL 0x20
+#define DA9055_DIG_ROUTING_AIF 0X21
+#define DA9055_SR 0x22
+#define DA9055_REFERENCES 0x23
+#define DA9055_PLL_FRAC_TOP 0x24
+#define DA9055_PLL_FRAC_BOT 0x25
+#define DA9055_PLL_INTEGER 0x26
+#define DA9055_PLL_CTRL 0x27
+#define DA9055_AIF_CLK_MODE 0x28
+#define DA9055_AIF_CTRL 0x29
+#define DA9055_DIG_ROUTING_DAC 0x2A
+#define DA9055_ALC_CTRL1 0x2B
+
+/* Input - Gain, Select and Filter Registers */
+#define DA9055_AUX_L_GAIN 0x30
+#define DA9055_AUX_R_GAIN 0x31
+#define DA9055_MIXIN_L_SELECT 0x32
+#define DA9055_MIXIN_R_SELECT 0x33
+#define DA9055_MIXIN_L_GAIN 0x34
+#define DA9055_MIXIN_R_GAIN 0x35
+#define DA9055_ADC_L_GAIN 0x36
+#define DA9055_ADC_R_GAIN 0x37
+#define DA9055_ADC_FILTERS1 0x38
+#define DA9055_MIC_L_GAIN 0x39
+#define DA9055_MIC_R_GAIN 0x3A
+
+/* Output - Gain, Select and Filter Registers */
+#define DA9055_DAC_FILTERS5 0x40
+#define DA9055_DAC_FILTERS2 0x41
+#define DA9055_DAC_FILTERS3 0x42
+#define DA9055_DAC_FILTERS4 0x43
+#define DA9055_DAC_FILTERS1 0x44
+#define DA9055_DAC_L_GAIN 0x45
+#define DA9055_DAC_R_GAIN 0x46
+#define DA9055_CP_CTRL 0x47
+#define DA9055_HP_L_GAIN 0x48
+#define DA9055_HP_R_GAIN 0x49
+#define DA9055_LINE_GAIN 0x4A
+#define DA9055_MIXOUT_L_SELECT 0x4B
+#define DA9055_MIXOUT_R_SELECT 0x4C
+
+/* System Controller Registers */
+#define DA9055_SYSTEM_MODES_INPUT 0x50
+#define DA9055_SYSTEM_MODES_OUTPUT 0x51
+
+/* Control Registers */
+#define DA9055_AUX_L_CTRL 0x60
+#define DA9055_AUX_R_CTRL 0x61
+#define DA9055_MIC_BIAS_CTRL 0x62
+#define DA9055_MIC_L_CTRL 0x63
+#define DA9055_MIC_R_CTRL 0x64
+#define DA9055_MIXIN_L_CTRL 0x65
+#define DA9055_MIXIN_R_CTRL 0x66
+#define DA9055_ADC_L_CTRL 0x67
+#define DA9055_ADC_R_CTRL 0x68
+#define DA9055_DAC_L_CTRL 0x69
+#define DA9055_DAC_R_CTRL 0x6A
+#define DA9055_HP_L_CTRL 0x6B
+#define DA9055_HP_R_CTRL 0x6C
+#define DA9055_LINE_CTRL 0x6D
+#define DA9055_MIXOUT_L_CTRL 0x6E
+#define DA9055_MIXOUT_R_CTRL 0x6F
+
+/* Configuration Registers */
+#define DA9055_LDO_CTRL 0x90
+#define DA9055_IO_CTRL 0x91
+#define DA9055_GAIN_RAMP_CTRL 0x92
+#define DA9055_MIC_CONFIG 0x93
+#define DA9055_PC_COUNT 0x94
+#define DA9055_CP_VOL_THRESHOLD1 0x95
+#define DA9055_CP_DELAY 0x96
+#define DA9055_CP_DETECTOR 0x97
+#define DA9055_AIF_OFFSET 0x98
+#define DA9055_DIG_CTRL 0x99
+#define DA9055_ALC_CTRL2 0x9A
+#define DA9055_ALC_CTRL3 0x9B
+#define DA9055_ALC_NOISE 0x9C
+#define DA9055_ALC_TARGET_MIN 0x9D
+#define DA9055_ALC_TARGET_MAX 0x9E
+#define DA9055_ALC_GAIN_LIMITS 0x9F
+#define DA9055_ALC_ANA_GAIN_LIMITS 0xA0
+#define DA9055_ALC_ANTICLIP_CTRL 0xA1
+#define DA9055_ALC_ANTICLIP_LEVEL 0xA2
+#define DA9055_ALC_OFFSET_OP2M_L 0xA6
+#define DA9055_ALC_OFFSET_OP2U_L 0xA7
+#define DA9055_ALC_OFFSET_OP2M_R 0xAB
+#define DA9055_ALC_OFFSET_OP2U_R 0xAC
+#define DA9055_ALC_CIC_OP_LVL_CTRL 0xAD
+#define DA9055_ALC_CIC_OP_LVL_DATA 0xAE
+#define DA9055_DAC_NG_SETUP_TIME 0xAF
+#define DA9055_DAC_NG_OFF_THRESHOLD 0xB0
+#define DA9055_DAC_NG_ON_THRESHOLD 0xB1
+#define DA9055_DAC_NG_CTRL 0xB2
+
+/* DIG_ROUTING_AIF bit fields */
+#define DA9055_AIF_L_SRC (0 << 0)
+#define DA9055_AIF_R_SRC (1 << 4)
+
+/* SR bit fields */
+#define DA9055_SR_8000 (0x1 << 0)
+#define DA9055_SR_11025 (0x2 << 0)
+#define DA9055_SR_12000 (0x3 << 0)
+#define DA9055_SR_16000 (0x5 << 0)
+#define DA9055_SR_22050 (0x6 << 0)
+#define DA9055_SR_24000 (0x7 << 0)
+#define DA9055_SR_32000 (0x9 << 0)
+#define DA9055_SR_44100 (0xA << 0)
+#define DA9055_SR_48000 (0xB << 0)
+#define DA9055_SR_88200 (0xE << 0)
+#define DA9055_SR_96000 (0xF << 0)
+
+/* REFERENCES bit fields */
+#define DA9055_BIAS_EN (1 << 3)
+#define DA9055_VMID_EN (1 << 7)
+
+/* PLL_CTRL bit fields */
+#define DA9055_PLL_INDIV_10_20_MHZ (1 << 2)
+#define DA9055_PLL_SRM_EN (1 << 6)
+#define DA9055_PLL_EN (1 << 7)
+
+/* AIF_CLK_MODE bit fields */
+#define DA9055_AIF_BCLKS_PER_WCLK_32 (0 << 0)
+#define DA9055_AIF_BCLKS_PER_WCLK_64 (1 << 0)
+#define DA9055_AIF_BCLKS_PER_WCLK_128 (2 << 0)
+#define DA9055_AIF_BCLKS_PER_WCLK_256 (3 << 0)
+#define DA9055_AIF_CLK_EN_SLAVE_MODE (0 << 7)
+#define DA9055_AIF_CLK_EN_MASTER_MODE (1 << 7)
+
+/* AIF_CTRL bit fields */
+#define DA9055_AIF_FORMAT_I2S_MODE (0 << 0)
+#define DA9055_AIF_FORMAT_LEFT_J (1 << 0)
+#define DA9055_AIF_FORMAT_RIGHT_J (2 << 0)
+#define DA9055_AIF_WORD_S16_LE (0 << 2)
+#define DA9055_AIF_WORD_S20_3LE (1 << 2)
+#define DA9055_AIF_WORD_S24_LE (2 << 2)
+#define DA9055_AIF_WORD_S32_LE (3 << 2)
+#define DA9055_AIF_OE (1 << 6)
+#define DA9055_AIF_EN (1 << 7)
+
+/* CP_CTRL bit fields */
+#define DA9055_CP_MCHANGE (3 << 4)
+#define DA9055_CP_EN (1 << 7)
+
+/* MIC_BIAS_CTRL bit fields */
+#define DA9055_MIC_BIAS_EN (1 << 7)
+
+/* MIXIN_L_CTRL bit fields */
+#define DA9055_MIXIN_L_MIX_EN (1 << 3)
+
+/* MIXIN_R_CTRL bit fields */
+#define DA9055_MIXIN_R_MIX_EN (1 << 3)
+
+/* ADC_L_CTRL bit fields */
+#define DA9055_ADC_L_EN (1 << 7)
+
+/* ADC_R_CTRL bit fields */
+#define DA9055_ADC_R_EN (1 << 7)
+
+/* DAC_L_CTRL bit fields */
+#define DA9055_DAC_L_MUTE_EN (1 << 6)
+
+/* DAC_R_CTRL bit fields */
+#define DA9055_DAC_R_MUTE_EN (1 << 6)
+
+/* HP_L_CTRL bit fields */
+#define DA9055_HP_L_AMP_OE (1 << 3)
+
+/* HP_R_CTRL bit fields */
+#define DA9055_HP_R_AMP_OE (1 << 3)
+
+/* LINE_CTRL bit fields */
+#define DA9055_LINE_AMP_OE (1 << 3)
+
+/* MIXOUT_L_CTRL bit fields */
+#define DA9055_MIXOUT_L_MIX_EN (1 << 3)
+#define DA9055_MIXOUT_L_AMP_EN (1 << 7)
+
+/* MIXOUT_R_CTRL bit fields */
+#define DA9055_MIXOUT_R_MIX_EN (1 << 3)
+#define DA9055_MIXOUT_R_AMP_EN (1 << 7)
+
+/* ALC_CIC_OP_LEVEL_CTRL bit fields */
+#define DA9055_ALC_CAPTURE_DATA (0 << 0)
+#define DA9055_ALC_DATA_BOT (1 << 0)
+#define DA9055_ALC_DATA_MIDDLE (2 << 0)
+#define DA9055_ALC_DATA_TOP (3 << 0)
+#define DA9055_ALC_CIC_OP_CHANNEL_LEFT (0 << 7)
+#define DA9055_ALC_CIC_OP_CHANNEL_RIGHT (1 << 7)
+
+#define DA9055_GAIN_RAMPING_EN (1 << 5)
+
+#define DA9055_ALC_OFFSET_15_8 0x00FF00
+#define DA9055_ALC_OFFSET_17_16 0x030000
+#define DA9055_ALC_AVG_ITERATIONS 5
+
+struct pll_div {
+ int fref;
+ int fout;
+ u8 frac_top;
+ u8 frac_bot;
+ u8 integer;
+ u8 mode; /* 0 = slave, 1 = master */
+};
+
+/* PLL divisor table */
+static const struct pll_div da9055_pll_div[] = {
+ /* for MASTER mode, fs = 44.1Khz and its harmonics */
+ {11289600, 2822400, 0x00, 0x00, 0x20, 1}, /* MCLK=11.2896Mhz */
+ {12000000, 2822400, 0x03, 0x61, 0x1E, 1}, /* MCLK=12Mhz */
+ {12288000, 2822400, 0x0C, 0xCC, 0x1D, 1}, /* MCLK=12.288Mhz */
+ {13000000, 2822400, 0x19, 0x45, 0x1B, 1}, /* MCLK=13Mhz */
+ {13500000, 2822400, 0x18, 0x56, 0x1A, 1}, /* MCLK=13.5Mhz */
+ {14400000, 2822400, 0x02, 0xD0, 0x19, 1}, /* MCLK=14.4Mhz */
+ {19200000, 2822400, 0x1A, 0x1C, 0x12, 1}, /* MCLK=19.2Mhz */
+ {19680000, 2822400, 0x0B, 0x6D, 0x12, 1}, /* MCLK=19.68Mhz */
+ {19800000, 2822400, 0x07, 0xDD, 0x12, 1}, /* MCLK=19.8Mhz */
+ /* for MASTER mode, fs = 48Khz and its harmonics */
+ {11289600, 3072000, 0x1A, 0x8E, 0x22, 1}, /* MCLK=11.2896Mhz */
+ {12000000, 3072000, 0x18, 0x93, 0x20, 1}, /* MCLK=12Mhz */
+ {12288000, 3072000, 0x00, 0x00, 0x20, 1}, /* MCLK=12.288Mhz */
+ {13000000, 3072000, 0x07, 0xEA, 0x1E, 1}, /* MCLK=13Mhz */
+ {13500000, 3072000, 0x04, 0x11, 0x1D, 1}, /* MCLK=13.5Mhz */
+ {14400000, 3072000, 0x09, 0xD0, 0x1B, 1}, /* MCLK=14.4Mhz */
+ {19200000, 3072000, 0x0F, 0x5C, 0x14, 1}, /* MCLK=19.2Mhz */
+ {19680000, 3072000, 0x1F, 0x60, 0x13, 1}, /* MCLK=19.68Mhz */
+ {19800000, 3072000, 0x1B, 0x80, 0x13, 1}, /* MCLK=19.8Mhz */
+ /* for SLAVE mode with SRM */
+ {11289600, 2822400, 0x0D, 0x47, 0x21, 0}, /* MCLK=11.2896Mhz */
+ {12000000, 2822400, 0x0D, 0xFA, 0x1F, 0}, /* MCLK=12Mhz */
+ {12288000, 2822400, 0x16, 0x66, 0x1E, 0}, /* MCLK=12.288Mhz */
+ {13000000, 2822400, 0x00, 0x98, 0x1D, 0}, /* MCLK=13Mhz */
+ {13500000, 2822400, 0x1E, 0x33, 0x1B, 0}, /* MCLK=13.5Mhz */
+ {14400000, 2822400, 0x06, 0x50, 0x1A, 0}, /* MCLK=14.4Mhz */
+ {19200000, 2822400, 0x14, 0xBC, 0x13, 0}, /* MCLK=19.2Mhz */
+ {19680000, 2822400, 0x05, 0x66, 0x13, 0}, /* MCLK=19.68Mhz */
+ {19800000, 2822400, 0x01, 0xAE, 0x13, 0}, /* MCLK=19.8Mhz */
+};
+
+enum clk_src {
+ DA9055_CLKSRC_MCLK
+};
+
+/* Gain and Volume */
+
+static const unsigned int aux_vol_tlv[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0x0, 0x10, TLV_DB_SCALE_ITEM(-5400, 0, 0),
+ /* -54dB to 15dB */
+ 0x11, 0x3f, TLV_DB_SCALE_ITEM(-5400, 150, 0)
+};
+
+static const unsigned int digital_gain_tlv[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0x0, 0x07, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 1),
+ /* -78dB to 12dB */
+ 0x08, 0x7f, TLV_DB_SCALE_ITEM(-7800, 75, 0)
+};
+
+static const unsigned int alc_analog_gain_tlv[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0x0, 0x0, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 1),
+ /* 0dB to 36dB */
+ 0x01, 0x07, TLV_DB_SCALE_ITEM(0, 600, 0)
+};
+
+static const DECLARE_TLV_DB_SCALE(mic_vol_tlv, -600, 600, 0);
+static const DECLARE_TLV_DB_SCALE(mixin_gain_tlv, -450, 150, 0);
+static const DECLARE_TLV_DB_SCALE(eq_gain_tlv, -1050, 150, 0);
+static const DECLARE_TLV_DB_SCALE(hp_vol_tlv, -5700, 100, 0);
+static const DECLARE_TLV_DB_SCALE(lineout_vol_tlv, -4800, 100, 0);
+static const DECLARE_TLV_DB_SCALE(alc_threshold_tlv, -9450, 150, 0);
+static const DECLARE_TLV_DB_SCALE(alc_gain_tlv, 0, 600, 0);
+
+/* ADC and DAC high pass filter cutoff value */
+static const char * const da9055_hpf_cutoff_txt[] = {
+ "Fs/24000", "Fs/12000", "Fs/6000", "Fs/3000"
+};
+
+static const struct soc_enum da9055_dac_hpf_cutoff =
+ SOC_ENUM_SINGLE(DA9055_DAC_FILTERS1, 4, 4, da9055_hpf_cutoff_txt);
+
+static const struct soc_enum da9055_adc_hpf_cutoff =
+ SOC_ENUM_SINGLE(DA9055_ADC_FILTERS1, 4, 4, da9055_hpf_cutoff_txt);
+
+/* ADC and DAC voice mode (8kHz) high pass cutoff value */
+static const char * const da9055_vf_cutoff_txt[] = {
+ "2.5Hz", "25Hz", "50Hz", "100Hz", "150Hz", "200Hz", "300Hz", "400Hz"
+};
+
+static const struct soc_enum da9055_dac_vf_cutoff =
+ SOC_ENUM_SINGLE(DA9055_DAC_FILTERS1, 0, 8, da9055_vf_cutoff_txt);
+
+static const struct soc_enum da9055_adc_vf_cutoff =
+ SOC_ENUM_SINGLE(DA9055_ADC_FILTERS1, 0, 8, da9055_vf_cutoff_txt);
+
+/* Gain ramping rate value */
+static const char * const da9055_gain_ramping_txt[] = {
+ "nominal rate", "nominal rate * 4", "nominal rate * 8",
+ "nominal rate / 8"
+};
+
+static const struct soc_enum da9055_gain_ramping_rate =
+ SOC_ENUM_SINGLE(DA9055_GAIN_RAMP_CTRL, 0, 4, da9055_gain_ramping_txt);
+
+/* DAC noise gate setup time value */
+static const char * const da9055_dac_ng_setup_time_txt[] = {
+ "256 samples", "512 samples", "1024 samples", "2048 samples"
+};
+
+static const struct soc_enum da9055_dac_ng_setup_time =
+ SOC_ENUM_SINGLE(DA9055_DAC_NG_SETUP_TIME, 0, 4,
+ da9055_dac_ng_setup_time_txt);
+
+/* DAC noise gate rampup rate value */
+static const char * const da9055_dac_ng_rampup_txt[] = {
+ "0.02 ms/dB", "0.16 ms/dB"
+};
+
+static const struct soc_enum da9055_dac_ng_rampup_rate =
+ SOC_ENUM_SINGLE(DA9055_DAC_NG_SETUP_TIME, 2, 2,
+ da9055_dac_ng_rampup_txt);
+
+/* DAC noise gate rampdown rate value */
+static const char * const da9055_dac_ng_rampdown_txt[] = {
+ "0.64 ms/dB", "20.48 ms/dB"
+};
+
+static const struct soc_enum da9055_dac_ng_rampdown_rate =
+ SOC_ENUM_SINGLE(DA9055_DAC_NG_SETUP_TIME, 3, 2,
+ da9055_dac_ng_rampdown_txt);
+
+/* DAC soft mute rate value */
+static const char * const da9055_dac_soft_mute_rate_txt[] = {
+ "1", "2", "4", "8", "16", "32", "64"
+};
+
+static const struct soc_enum da9055_dac_soft_mute_rate =
+ SOC_ENUM_SINGLE(DA9055_DAC_FILTERS5, 4, 7,
+ da9055_dac_soft_mute_rate_txt);
+
+/* LDO voltage level value */
+static const char * const da9055_ldo_lvl_select_txt[] = {
+ "1.05V", "1.1V", "1.2V", "1.4V"
+};
+
+static const struct soc_enum da9055_ldo_lvl_select =
+ SOC_ENUM_SINGLE(DA9055_LDO_CTRL, 4, 4, da9055_ldo_lvl_select_txt);
+
+/* AIF routing select */
+static const char * const da9055_aif_select_txt[] = {
+ "ADC left", "ADC right", "AIF input left", "AIF input right"
+};
+
+static const struct soc_enum da9055_aif_l_select =
+ SOC_ENUM_SINGLE(DA9055_DIG_ROUTING_AIF, 0, 4, da9055_aif_select_txt);
+
+static const struct soc_enum da9055_aif_r_select =
+ SOC_ENUM_SINGLE(DA9055_DIG_ROUTING_AIF, 4, 4, da9055_aif_select_txt);
+
+/* DAC routing select */
+static const char * const da9055_dac_select_txt[] = {
+ "ADC left output", "ADC right output", "AIF input left",
+ "AIF input right"
+};
+
+static const struct soc_enum da9055_dac_l_select =
+ SOC_ENUM_SINGLE(DA9055_DIG_ROUTING_DAC, 0, 4, da9055_dac_select_txt);
+
+static const struct soc_enum da9055_dac_r_select =
+ SOC_ENUM_SINGLE(DA9055_DIG_ROUTING_DAC, 4, 4, da9055_dac_select_txt);
+
+/* Digital MIC clock rate select */
+static const char * const da9055_dmic_clk_rate_txt[] = {
+ "3MHz", "1.5MHz"
+};
+
+static const struct soc_enum da9055_dmic_clk_rate =
+ SOC_ENUM_SINGLE(DA9055_MIC_CONFIG, 2, 2, da9055_dmic_clk_rate_txt);
+
+/* Digital MIC sample phase select */
+static const char * const da9055_dmic_phase_txt[] = {
+ "Sample on DMICCLK edges", "Sample between DMICCLK edges"
+};
+
+static const struct soc_enum da9055_dmic_phase =
+ SOC_ENUM_SINGLE(DA9055_MIC_CONFIG, 1, 2, da9055_dmic_phase_txt);
+
+/* Digital MIC channel select */
+static const char * const da9055_dmic_channel_select_txt[] = {
+ "Rising Left Falling Right", "Falling Left Rising Right"
+};
+
+static const struct soc_enum da9055_dmic_channel_select =
+ SOC_ENUM_SINGLE(DA9055_MIC_CONFIG, 0, 2,
+ da9055_dmic_channel_select_txt);
+
+/* MIC bias select */
+static const char * const da9055_mic_bias_select_txt[] = {
+ "MIC Bias 1", "MIC Bias 2"
+};
+
+static const struct soc_enum da9055_mic_bias_select =
+ SOC_ENUM_SINGLE(DA9055_MIXIN_R_SELECT, 6, 2,
+ da9055_mic_bias_select_txt);
+
+/* MIC bias voltage level select */
+static const char * const da9055_mic_bias_level_txt[] = {
+ "1.6V", "1.8V", "2.1V", "2.2V"
+};
+
+static const struct soc_enum da9055_mic_bias_level =
+ SOC_ENUM_SINGLE(DA9055_MIC_CONFIG, 4, 4, da9055_mic_bias_level_txt);
+
+/* MIC Left Amp routing select */
+static const char * const da9055_mic_l_select_txt[] = {
+ "MIC1_P_N", "MIC1_P", "MIC1_N", "MIC2_L"
+};
+
+static const struct soc_enum da9055_mic_l_select =
+ SOC_ENUM_SINGLE(DA9055_MIXIN_L_SELECT, 4, 4, da9055_mic_l_select_txt);
+
+/* MIC Right Amp routing select */
+static const char * const da9055_mic_r_select_txt[] = {
+ "MIC2_R_L", "MIC2_R", "MIC2_L"
+};
+
+static const struct soc_enum da9055_mic_r_select =
+ SOC_ENUM_SINGLE(DA9055_MIXIN_R_SELECT, 4, 3, da9055_mic_r_select_txt);
+
+/* ALC Input Signal Tracking rate select */
+static const char * const da9055_signal_tracking_rate_txt[] = {
+ "1/4", "1/16", "1/256", "1/65536"
+};
+
+static const struct soc_enum da9055_integ_attack_rate =
+ SOC_ENUM_SINGLE(DA9055_ALC_CTRL3, 4, 4,
+ da9055_signal_tracking_rate_txt);
+
+static const struct soc_enum da9055_integ_release_rate =
+ SOC_ENUM_SINGLE(DA9055_ALC_CTRL3, 6, 4,
+ da9055_signal_tracking_rate_txt);
+
+/* ALC Attack Rate select */
+static const char * const da9055_attack_rate_txt[] = {
+ "44/fs", "88/fs", "176/fs", "352/fs", "704/fs", "1408/fs", "2816/fs",
+ "5632/fs", "11264/fs", "22528/fs", "45056/fs", "90112/fs", "180224/fs"
+};
+
+static const struct soc_enum da9055_attack_rate =
+ SOC_ENUM_SINGLE(DA9055_ALC_CTRL2, 0, 13, da9055_attack_rate_txt);
+
+/* ALC Release Rate select */
+static const char * const da9055_release_rate_txt[] = {
+ "176/fs", "352/fs", "704/fs", "1408/fs", "2816/fs", "5632/fs",
+ "11264/fs", "22528/fs", "45056/fs", "90112/fs", "180224/fs"
+};
+
+static const struct soc_enum da9055_release_rate =
+ SOC_ENUM_SINGLE(DA9055_ALC_CTRL2, 4, 11, da9055_release_rate_txt);
+
+/* ALC Hold Time select */
+static const char * const da9055_hold_time_txt[] = {
+ "62/fs", "124/fs", "248/fs", "496/fs", "992/fs", "1984/fs", "3968/fs",
+ "7936/fs", "15872/fs", "31744/fs", "63488/fs", "126976/fs",
+ "253952/fs", "507904/fs", "1015808/fs", "2031616/fs"
+};
+
+static const struct soc_enum da9055_hold_time =
+ SOC_ENUM_SINGLE(DA9055_ALC_CTRL3, 0, 16, da9055_hold_time_txt);
+
+static int da9055_get_alc_data(struct snd_soc_codec *codec, u8 reg_val)
+{
+ int mid_data, top_data;
+ int sum = 0;
+ u8 iteration;
+
+ for (iteration = 0; iteration < DA9055_ALC_AVG_ITERATIONS;
+ iteration++) {
+ /* Select the left or right channel and capture data */
+ snd_soc_write(codec, DA9055_ALC_CIC_OP_LVL_CTRL, reg_val);
+
+ /* Select middle 8 bits for read back from data register */
+ snd_soc_write(codec, DA9055_ALC_CIC_OP_LVL_CTRL,
+ reg_val | DA9055_ALC_DATA_MIDDLE);
+ mid_data = snd_soc_read(codec, DA9055_ALC_CIC_OP_LVL_DATA);
+
+ /* Select top 8 bits for read back from data register */
+ snd_soc_write(codec, DA9055_ALC_CIC_OP_LVL_CTRL,
+ reg_val | DA9055_ALC_DATA_TOP);
+ top_data = snd_soc_read(codec, DA9055_ALC_CIC_OP_LVL_DATA);
+
+ sum += ((mid_data << 8) | (top_data << 16));
+ }
+
+ return sum / DA9055_ALC_AVG_ITERATIONS;
+}
+
+static int da9055_put_alc_sw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ u8 reg_val, adc_left, adc_right;
+ int avg_left_data, avg_right_data, offset_l, offset_r;
+
+ if (ucontrol->value.integer.value[0]) {
+ /*
+ * While enabling ALC (or ALC sync mode), calibration of the DC
+ * offsets must be done first
+ */
+
+ /* Save current values from ADC control registers */
+ adc_left = snd_soc_read(codec, DA9055_ADC_L_CTRL);
+ adc_right = snd_soc_read(codec, DA9055_ADC_R_CTRL);
+
+ /* Enable ADC Left and Right */
+ snd_soc_update_bits(codec, DA9055_ADC_L_CTRL,
+ DA9055_ADC_L_EN, DA9055_ADC_L_EN);
+ snd_soc_update_bits(codec, DA9055_ADC_R_CTRL,
+ DA9055_ADC_R_EN, DA9055_ADC_R_EN);
+
+ /* Calculate average for Left and Right data */
+ /* Left Data */
+ avg_left_data = da9055_get_alc_data(codec,
+ DA9055_ALC_CIC_OP_CHANNEL_LEFT);
+ /* Right Data */
+ avg_right_data = da9055_get_alc_data(codec,
+ DA9055_ALC_CIC_OP_CHANNEL_RIGHT);
+
+ /* Calculate DC offset */
+ offset_l = -avg_left_data;
+ offset_r = -avg_right_data;
+
+ reg_val = (offset_l & DA9055_ALC_OFFSET_15_8) >> 8;
+ snd_soc_write(codec, DA9055_ALC_OFFSET_OP2M_L, reg_val);
+ reg_val = (offset_l & DA9055_ALC_OFFSET_17_16) >> 16;
+ snd_soc_write(codec, DA9055_ALC_OFFSET_OP2U_L, reg_val);
+
+ reg_val = (offset_r & DA9055_ALC_OFFSET_15_8) >> 8;
+ snd_soc_write(codec, DA9055_ALC_OFFSET_OP2M_R, reg_val);
+ reg_val = (offset_r & DA9055_ALC_OFFSET_17_16) >> 16;
+ snd_soc_write(codec, DA9055_ALC_OFFSET_OP2U_R, reg_val);
+
+ /* Restore original values of ADC control registers */
+ snd_soc_write(codec, DA9055_ADC_L_CTRL, adc_left);
+ snd_soc_write(codec, DA9055_ADC_R_CTRL, adc_right);
+ }
+
+ return snd_soc_put_volsw(kcontrol, ucontrol);
+}
+
+static const struct snd_kcontrol_new da9055_snd_controls[] = {
+
+ /* Volume controls */
+ SOC_DOUBLE_R_TLV("Mic Volume",
+ DA9055_MIC_L_GAIN, DA9055_MIC_R_GAIN,
+ 0, 0x7, 0, mic_vol_tlv),
+ SOC_DOUBLE_R_TLV("Aux Volume",
+ DA9055_AUX_L_GAIN, DA9055_AUX_R_GAIN,
+ 0, 0x3f, 0, aux_vol_tlv),
+ SOC_DOUBLE_R_TLV("Mixin PGA Volume",
+ DA9055_MIXIN_L_GAIN, DA9055_MIXIN_R_GAIN,
+ 0, 0xf, 0, mixin_gain_tlv),
+ SOC_DOUBLE_R_TLV("ADC Volume",
+ DA9055_ADC_L_GAIN, DA9055_ADC_R_GAIN,
+ 0, 0x7f, 0, digital_gain_tlv),
+
+ SOC_DOUBLE_R_TLV("DAC Volume",
+ DA9055_DAC_L_GAIN, DA9055_DAC_R_GAIN,
+ 0, 0x7f, 0, digital_gain_tlv),
+ SOC_DOUBLE_R_TLV("HeadPhone Volume",
+ DA9055_HP_L_GAIN, DA9055_HP_R_GAIN,
+ 0, 0x3f, 0, hp_vol_tlv),
+ SOC_SINGLE_TLV("Lineout Volume", DA9055_LINE_GAIN, 0, 0x3f, 0,
+ lineout_vol_tlv),
+
+ /* DAC Equalizer controls */
+ SOC_SINGLE("DAC EQ Switch", DA9055_DAC_FILTERS4, 7, 1, 0),
+ SOC_SINGLE_TLV("DAC EQ1 Volume", DA9055_DAC_FILTERS2, 0, 0xf, 0,
+ eq_gain_tlv),
+ SOC_SINGLE_TLV("DAC EQ2 Volume", DA9055_DAC_FILTERS2, 4, 0xf, 0,
+ eq_gain_tlv),
+ SOC_SINGLE_TLV("DAC EQ3 Volume", DA9055_DAC_FILTERS3, 0, 0xf, 0,
+ eq_gain_tlv),
+ SOC_SINGLE_TLV("DAC EQ4 Volume", DA9055_DAC_FILTERS3, 4, 0xf, 0,
+ eq_gain_tlv),
+ SOC_SINGLE_TLV("DAC EQ5 Volume", DA9055_DAC_FILTERS4, 0, 0xf, 0,
+ eq_gain_tlv),
+
+ /* High Pass Filter and Voice Mode controls */
+ SOC_SINGLE("ADC HPF Switch", DA9055_ADC_FILTERS1, 7, 1, 0),
+ SOC_ENUM("ADC HPF Cutoff", da9055_adc_hpf_cutoff),
+ SOC_SINGLE("ADC Voice Mode Switch", DA9055_ADC_FILTERS1, 3, 1, 0),
+ SOC_ENUM("ADC Voice Cutoff", da9055_adc_vf_cutoff),
+
+ SOC_SINGLE("DAC HPF Switch", DA9055_DAC_FILTERS1, 7, 1, 0),
+ SOC_ENUM("DAC HPF Cutoff", da9055_dac_hpf_cutoff),
+ SOC_SINGLE("DAC Voice Mode Switch", DA9055_DAC_FILTERS1, 3, 1, 0),
+ SOC_ENUM("DAC Voice Cutoff", da9055_dac_vf_cutoff),
+
+ /* Mute controls */
+ SOC_DOUBLE_R("Mic Mute Switch", DA9055_MIC_L_CTRL,
+ DA9055_MIC_R_CTRL, 6, 1, 0),
+ SOC_DOUBLE_R("Aux Mute Switch", DA9055_AUX_L_CTRL,
+ DA9055_AUX_R_CTRL, 6, 1, 0),
+ SOC_DOUBLE_R("Mixin PGA Mute Switch", DA9055_MIXIN_L_CTRL,
+ DA9055_MIXIN_R_CTRL, 6, 1, 0),
+ SOC_DOUBLE_R("ADC Mute Switch", DA9055_ADC_L_CTRL,
+ DA9055_ADC_R_CTRL, 6, 1, 0),
+ SOC_DOUBLE_R("HeadPhone Mute Switch", DA9055_HP_L_CTRL,
+ DA9055_HP_R_CTRL, 6, 1, 0),
+ SOC_SINGLE("Lineout Mute Switch", DA9055_LINE_CTRL, 6, 1, 0),
+ SOC_SINGLE("DAC Soft Mute Switch", DA9055_DAC_FILTERS5, 7, 1, 0),
+ SOC_ENUM("DAC Soft Mute Rate", da9055_dac_soft_mute_rate),
+
+ /* Zero Cross controls */
+ SOC_DOUBLE_R("Aux ZC Switch", DA9055_AUX_L_CTRL,
+ DA9055_AUX_R_CTRL, 4, 1, 0),
+ SOC_DOUBLE_R("Mixin PGA ZC Switch", DA9055_MIXIN_L_CTRL,
+ DA9055_MIXIN_R_CTRL, 4, 1, 0),
+ SOC_DOUBLE_R("HeadPhone ZC Switch", DA9055_HP_L_CTRL,
+ DA9055_HP_R_CTRL, 4, 1, 0),
+ SOC_SINGLE("Lineout ZC Switch", DA9055_LINE_CTRL, 4, 1, 0),
+
+ /* Gain Ramping controls */
+ SOC_DOUBLE_R("Aux Gain Ramping Switch", DA9055_AUX_L_CTRL,
+ DA9055_AUX_R_CTRL, 5, 1, 0),
+ SOC_DOUBLE_R("Mixin Gain Ramping Switch", DA9055_MIXIN_L_CTRL,
+ DA9055_MIXIN_R_CTRL, 5, 1, 0),
+ SOC_DOUBLE_R("ADC Gain Ramping Switch", DA9055_ADC_L_CTRL,
+ DA9055_ADC_R_CTRL, 5, 1, 0),
+ SOC_DOUBLE_R("DAC Gain Ramping Switch", DA9055_DAC_L_CTRL,
+ DA9055_DAC_R_CTRL, 5, 1, 0),
+ SOC_DOUBLE_R("HeadPhone Gain Ramping Switch", DA9055_HP_L_CTRL,
+ DA9055_HP_R_CTRL, 5, 1, 0),
+ SOC_SINGLE("Lineout Gain Ramping Switch", DA9055_LINE_CTRL, 5, 1, 0),
+ SOC_ENUM("Gain Ramping Rate", da9055_gain_ramping_rate),
+
+ /* DAC Noise Gate controls */
+ SOC_SINGLE("DAC NG Enable Switch", DA9055_DAC_NG_CTRL, 7, 1, 0),
+ SOC_SINGLE("DAC NG ON Threshold", DA9055_DAC_NG_ON_THRESHOLD,
+ 0, 0x7, 0),
+ SOC_SINGLE("DAC NG OFF Threshold", DA9055_DAC_NG_OFF_THRESHOLD,
+ 0, 0x7, 0),
+ SOC_ENUM("DAC NG Setup Time", da9055_dac_ng_setup_time),
+ SOC_ENUM("DAC NG Rampup Rate", da9055_dac_ng_rampup_rate),
+ SOC_ENUM("DAC NG Rampdown Rate", da9055_dac_ng_rampdown_rate),
+
+ /* LDO control */
+ SOC_SINGLE("LDO Enable", DA9055_LDO_CTRL, 7, 1, 0),
+ SOC_ENUM("LDO Level Select", da9055_ldo_lvl_select),
+
+ /* AIF Routing control */
+ SOC_ENUM("AIF Left Select", da9055_aif_l_select),
+ SOC_ENUM("AIF Right Select", da9055_aif_r_select),
+
+ /* DAC Routing control */
+ SOC_ENUM("DAC Left Select", da9055_dac_l_select),
+ SOC_ENUM("DAC Right Select", da9055_dac_r_select),
+
+ /* DAC Invertion control */
+ SOC_SINGLE("DAC Left Invert", DA9055_DIG_CTRL, 3, 1, 0),
+ SOC_SINGLE("DAC Right Invert", DA9055_DIG_CTRL, 7, 1, 0),
+
+ /* DMIC controls */
+ SOC_DOUBLE_R("DMIC Enable", DA9055_MIXIN_L_SELECT,
+ DA9055_MIXIN_R_SELECT, 7, 1, 0),
+ SOC_ENUM("DMIC Clock Rate", da9055_dmic_clk_rate),
+ SOC_ENUM("DMIC Sample Phase", da9055_dmic_phase),
+ SOC_ENUM("DMIC Channel Select", da9055_dmic_channel_select),
+
+ /* MIC PGA input selection controls */
+ SOC_ENUM("Mic Left Input Select", da9055_mic_l_select),
+ SOC_ENUM("Mic Right Input Select", da9055_mic_r_select),
+
+ /* To select if MIC Bias powers MIC 1 or MIC 2 */
+ SOC_ENUM("Mic Bias Select", da9055_mic_bias_select),
+
+ /* MIC Bias voltage select control */
+ SOC_ENUM("Mic Bias Level", da9055_mic_bias_level),
+
+ /* ALC Controls */
+ SOC_DOUBLE_EXT("ALC Enable", DA9055_ALC_CTRL1, 3, 7, 1, 0,
+ snd_soc_get_volsw, da9055_put_alc_sw),
+ SOC_SINGLE_EXT("ALC Sync Mode Enable", DA9055_ALC_CTRL1, 1, 1, 0,
+ snd_soc_get_volsw, da9055_put_alc_sw),
+ SOC_SINGLE("ALC Offset Enable", DA9055_ALC_CTRL1, 0, 1, 0),
+ SOC_SINGLE("ALC Anticlip Mode Enable", DA9055_ALC_ANTICLIP_CTRL,
+ 7, 1, 0),
+ SOC_SINGLE("ALC Anticlip Level", DA9055_ALC_ANTICLIP_LEVEL,
+ 0, 0x7f, 0),
+ SOC_SINGLE_TLV("ALC Min Threshold Volume", DA9055_ALC_TARGET_MIN,
+ 0, 0x3f, 1, alc_threshold_tlv),
+ SOC_SINGLE_TLV("ALC Max Threshold Volume", DA9055_ALC_TARGET_MAX,
+ 0, 0x3f, 1, alc_threshold_tlv),
+ SOC_SINGLE_TLV("ALC Noise Threshold Volume", DA9055_ALC_NOISE,
+ 0, 0x3f, 1, alc_threshold_tlv),
+ SOC_SINGLE_TLV("ALC Max Gain Volume", DA9055_ALC_GAIN_LIMITS,
+ 4, 0xf, 0, alc_gain_tlv),
+ SOC_SINGLE_TLV("ALC Max Attenuation Volume", DA9055_ALC_GAIN_LIMITS,
+ 0, 0xf, 0, alc_gain_tlv),
+ SOC_SINGLE_TLV("ALC Min Analog Gain Volume",
+ DA9055_ALC_ANA_GAIN_LIMITS,
+ 0, 0x7, 0, alc_analog_gain_tlv),
+ SOC_SINGLE_TLV("ALC Max Analog Gain Volume",
+ DA9055_ALC_ANA_GAIN_LIMITS,
+ 4, 0x7, 0, alc_analog_gain_tlv),
+ SOC_ENUM("ALC Attack Rate", da9055_attack_rate),
+ SOC_ENUM("ALC Release Rate", da9055_release_rate),
+ SOC_ENUM("ALC Hold Time", da9055_hold_time),
+ /*
+ * Rate at which input signal envelope is tracked as the signal gets
+ * larger
+ */
+ SOC_ENUM("ALC Integ Attack Rate", da9055_integ_attack_rate),
+ /*
+ * Rate at which input signal envelope is tracked as the signal gets
+ * smaller
+ */
+ SOC_ENUM("ALC Integ Release Rate", da9055_integ_release_rate),
+};
+
+/* DAPM Controls */
+
+/* In Mixer Left */
+static const struct snd_kcontrol_new da9055_dapm_mixinl_controls[] = {
+ SOC_DAPM_SINGLE("Aux Left Switch", DA9055_MIXIN_L_SELECT, 0, 1, 0),
+ SOC_DAPM_SINGLE("Mic Left Switch", DA9055_MIXIN_L_SELECT, 1, 1, 0),
+ SOC_DAPM_SINGLE("Mic Right Switch", DA9055_MIXIN_L_SELECT, 2, 1, 0),
+};
+
+/* In Mixer Right */
+static const struct snd_kcontrol_new da9055_dapm_mixinr_controls[] = {
+ SOC_DAPM_SINGLE("Aux Right Switch", DA9055_MIXIN_R_SELECT, 0, 1, 0),
+ SOC_DAPM_SINGLE("Mic Right Switch", DA9055_MIXIN_R_SELECT, 1, 1, 0),
+ SOC_DAPM_SINGLE("Mic Left Switch", DA9055_MIXIN_R_SELECT, 2, 1, 0),
+ SOC_DAPM_SINGLE("Mixin Left Switch", DA9055_MIXIN_R_SELECT, 3, 1, 0),
+};
+
+/* Out Mixer Left */
+static const struct snd_kcontrol_new da9055_dapm_mixoutl_controls[] = {
+ SOC_DAPM_SINGLE("Aux Left Switch", DA9055_MIXOUT_L_SELECT, 0, 1, 0),
+ SOC_DAPM_SINGLE("Mixin Left Switch", DA9055_MIXOUT_L_SELECT, 1, 1, 0),
+ SOC_DAPM_SINGLE("Mixin Right Switch", DA9055_MIXOUT_L_SELECT, 2, 1, 0),
+ SOC_DAPM_SINGLE("DAC Left Switch", DA9055_MIXOUT_L_SELECT, 3, 1, 0),
+ SOC_DAPM_SINGLE("Aux Left Invert Switch", DA9055_MIXOUT_L_SELECT,
+ 4, 1, 0),
+ SOC_DAPM_SINGLE("Mixin Left Invert Switch", DA9055_MIXOUT_L_SELECT,
+ 5, 1, 0),
+ SOC_DAPM_SINGLE("Mixin Right Invert Switch", DA9055_MIXOUT_L_SELECT,
+ 6, 1, 0),
+};
+
+/* Out Mixer Right */
+static const struct snd_kcontrol_new da9055_dapm_mixoutr_controls[] = {
+ SOC_DAPM_SINGLE("Aux Right Switch", DA9055_MIXOUT_R_SELECT, 0, 1, 0),
+ SOC_DAPM_SINGLE("Mixin Right Switch", DA9055_MIXOUT_R_SELECT, 1, 1, 0),
+ SOC_DAPM_SINGLE("Mixin Left Switch", DA9055_MIXOUT_R_SELECT, 2, 1, 0),
+ SOC_DAPM_SINGLE("DAC Right Switch", DA9055_MIXOUT_R_SELECT, 3, 1, 0),
+ SOC_DAPM_SINGLE("Aux Right Invert Switch", DA9055_MIXOUT_R_SELECT,
+ 4, 1, 0),
+ SOC_DAPM_SINGLE("Mixin Right Invert Switch", DA9055_MIXOUT_R_SELECT,
+ 5, 1, 0),
+ SOC_DAPM_SINGLE("Mixin Left Invert Switch", DA9055_MIXOUT_R_SELECT,
+ 6, 1, 0),
+};
+
+/* DAPM widgets */
+static const struct snd_soc_dapm_widget da9055_dapm_widgets[] = {
+ /* Input Side */
+
+ /* Input Lines */
+ SND_SOC_DAPM_INPUT("MIC1"),
+ SND_SOC_DAPM_INPUT("MIC2L"),
+ SND_SOC_DAPM_INPUT("MIC2R"),
+ SND_SOC_DAPM_INPUT("AUXL"),
+ SND_SOC_DAPM_INPUT("AUXR"),
+
+ /* Input PGAs */
+ SND_SOC_DAPM_PGA("Mic Left", DA9055_MIC_L_CTRL, 7, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("Mic Right", DA9055_MIC_R_CTRL, 7, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("Aux Left", DA9055_AUX_L_CTRL, 7, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("Aux Right", DA9055_AUX_R_CTRL, 7, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("MIXIN Left", DA9055_MIXIN_L_CTRL, 7, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("MIXIN Right", DA9055_MIXIN_R_CTRL, 7, 0, NULL, 0),
+
+ /* Input Mixers */
+ SND_SOC_DAPM_MIXER("In Mixer Left", SND_SOC_NOPM, 0, 0,
+ &da9055_dapm_mixinl_controls[0],
+ ARRAY_SIZE(da9055_dapm_mixinl_controls)),
+ SND_SOC_DAPM_MIXER("In Mixer Right", SND_SOC_NOPM, 0, 0,
+ &da9055_dapm_mixinr_controls[0],
+ ARRAY_SIZE(da9055_dapm_mixinr_controls)),
+
+ /* ADCs */
+ SND_SOC_DAPM_ADC("ADC Left", "Capture", DA9055_ADC_L_CTRL, 7, 0),
+ SND_SOC_DAPM_ADC("ADC Right", "Capture", DA9055_ADC_R_CTRL, 7, 0),
+
+ /* Output Side */
+
+ /* DACs */
+ SND_SOC_DAPM_DAC("DAC Left", "Playback", DA9055_DAC_L_CTRL, 7, 0),
+ SND_SOC_DAPM_DAC("DAC Right", "Playback", DA9055_DAC_R_CTRL, 7, 0),
+
+ /* Output Mixers */
+ SND_SOC_DAPM_MIXER("Out Mixer Left", SND_SOC_NOPM, 0, 0,
+ &da9055_dapm_mixoutl_controls[0],
+ ARRAY_SIZE(da9055_dapm_mixoutl_controls)),
+ SND_SOC_DAPM_MIXER("Out Mixer Right", SND_SOC_NOPM, 0, 0,
+ &da9055_dapm_mixoutr_controls[0],
+ ARRAY_SIZE(da9055_dapm_mixoutr_controls)),
+
+ /* Output PGAs */
+ SND_SOC_DAPM_PGA("Lineout", DA9055_LINE_CTRL, 7, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("Headphone Left", DA9055_HP_L_CTRL, 7, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("Headphone Right", DA9055_HP_R_CTRL, 7, 0, NULL, 0),
+
+ /* Output Lines */
+ SND_SOC_DAPM_OUTPUT("HPL"),
+ SND_SOC_DAPM_OUTPUT("HPR"),
+ SND_SOC_DAPM_OUTPUT("LINE"),
+};
+
+/* DAPM audio route definition */
+static const struct snd_soc_dapm_route da9055_audio_map[] = {
+ /* Dest Connecting Widget source */
+
+ /* Input path */
+ {"Mic Left", NULL, "MIC1"},
+ {"Mic Left", NULL, "MIC2L"},
+ {"Mic Right", NULL, "MIC2L"},
+ {"Mic Right", NULL, "MIC2R"},
+ {"Aux Left", NULL, "AUXL"},
+ {"Aux Right", NULL, "AUXR"},
+
+ {"In Mixer Left", "Mic Left Switch", "Mic Left"},
+ {"In Mixer Left", "Mic Right Switch", "Mic Right"},
+ {"In Mixer Left", "Aux Left Switch", "Aux Left"},
+
+ {"In Mixer Right", "Mic Right Switch", "Mic Right"},
+ {"In Mixer Right", "Mic Left Switch", "Mic Left"},
+ {"In Mixer Right", "Aux Right Switch", "Aux Right"},
+ {"In Mixer Right", "Mixin Left Switch", "MIXIN Left"},
+
+ {"MIXIN Left", NULL, "In Mixer Left"},
+ {"ADC Left", NULL, "MIXIN Left"},
+
+ {"MIXIN Right", NULL, "In Mixer Right"},
+ {"ADC Right", NULL, "MIXIN Right"},
+
+ /* Output path */
+ {"Out Mixer Left", "Aux Left Switch", "Aux Left"},
+ {"Out Mixer Left", "Mixin Left Switch", "MIXIN Left"},
+ {"Out Mixer Left", "Mixin Right Switch", "MIXIN Right"},
+ {"Out Mixer Left", "Aux Left Invert Switch", "Aux Left"},
+ {"Out Mixer Left", "Mixin Left Invert Switch", "MIXIN Left"},
+ {"Out Mixer Left", "Mixin Right Invert Switch", "MIXIN Right"},
+ {"Out Mixer Left", "DAC Left Switch", "DAC Left"},
+
+ {"Out Mixer Right", "Aux Right Switch", "Aux Right"},
+ {"Out Mixer Right", "Mixin Right Switch", "MIXIN Right"},
+ {"Out Mixer Right", "Mixin Left Switch", "MIXIN Left"},
+ {"Out Mixer Right", "Aux Right Invert Switch", "Aux Right"},
+ {"Out Mixer Right", "Mixin Right Invert Switch", "MIXIN Right"},
+ {"Out Mixer Right", "Mixin Left Invert Switch", "MIXIN Left"},
+ {"Out Mixer Right", "DAC Right Switch", "DAC Right"},
+
+ {"Headphone Left", NULL, "Out Mixer Left"},
+ {"HPL", NULL, "Headphone Left"},
+
+ {"Headphone Right", NULL, "Out Mixer Right"},
+ {"HPR", NULL, "Headphone Right"},
+
+ {"Lineout", NULL, "Out Mixer Right"},
+ {"LINE", NULL, "Lineout"},
+};
+
+/* Codec private data */
+struct da9055_priv {
+ struct regmap *regmap;
+ unsigned int mclk_rate;
+ int master;
+};
+
+static struct reg_default da9055_reg_defaults[] = {
+ { 0x21, 0x10 },
+ { 0x22, 0x0A },
+ { 0x23, 0x00 },
+ { 0x24, 0x00 },
+ { 0x25, 0x00 },
+ { 0x26, 0x00 },
+ { 0x27, 0x0C },
+ { 0x28, 0x01 },
+ { 0x29, 0x08 },
+ { 0x2A, 0x32 },
+ { 0x2B, 0x00 },
+ { 0x30, 0x35 },
+ { 0x31, 0x35 },
+ { 0x32, 0x00 },
+ { 0x33, 0x00 },
+ { 0x34, 0x03 },
+ { 0x35, 0x03 },
+ { 0x36, 0x6F },
+ { 0x37, 0x6F },
+ { 0x38, 0x80 },
+ { 0x39, 0x01 },
+ { 0x3A, 0x01 },
+ { 0x40, 0x00 },
+ { 0x41, 0x88 },
+ { 0x42, 0x88 },
+ { 0x43, 0x08 },
+ { 0x44, 0x80 },
+ { 0x45, 0x6F },
+ { 0x46, 0x6F },
+ { 0x47, 0x61 },
+ { 0x48, 0x35 },
+ { 0x49, 0x35 },
+ { 0x4A, 0x35 },
+ { 0x4B, 0x00 },
+ { 0x4C, 0x00 },
+ { 0x60, 0x44 },
+ { 0x61, 0x44 },
+ { 0x62, 0x00 },
+ { 0x63, 0x40 },
+ { 0x64, 0x40 },
+ { 0x65, 0x40 },
+ { 0x66, 0x40 },
+ { 0x67, 0x40 },
+ { 0x68, 0x40 },
+ { 0x69, 0x48 },
+ { 0x6A, 0x40 },
+ { 0x6B, 0x41 },
+ { 0x6C, 0x40 },
+ { 0x6D, 0x40 },
+ { 0x6E, 0x10 },
+ { 0x6F, 0x10 },
+ { 0x90, 0x80 },
+ { 0x92, 0x02 },
+ { 0x93, 0x00 },
+ { 0x99, 0x00 },
+ { 0x9A, 0x00 },
+ { 0x9B, 0x00 },
+ { 0x9C, 0x3F },
+ { 0x9D, 0x00 },
+ { 0x9E, 0x3F },
+ { 0x9F, 0xFF },
+ { 0xA0, 0x71 },
+ { 0xA1, 0x00 },
+ { 0xA2, 0x00 },
+ { 0xA6, 0x00 },
+ { 0xA7, 0x00 },
+ { 0xAB, 0x00 },
+ { 0xAC, 0x00 },
+ { 0xAD, 0x00 },
+ { 0xAF, 0x08 },
+ { 0xB0, 0x00 },
+ { 0xB1, 0x00 },
+ { 0xB2, 0x00 },
+};
+
+static bool da9055_volatile_register(struct device *dev,
+ unsigned int reg)
+{
+ switch (reg) {
+ case DA9055_STATUS1:
+ case DA9055_PLL_STATUS:
+ case DA9055_AUX_L_GAIN_STATUS:
+ case DA9055_AUX_R_GAIN_STATUS:
+ case DA9055_MIC_L_GAIN_STATUS:
+ case DA9055_MIC_R_GAIN_STATUS:
+ case DA9055_MIXIN_L_GAIN_STATUS:
+ case DA9055_MIXIN_R_GAIN_STATUS:
+ case DA9055_ADC_L_GAIN_STATUS:
+ case DA9055_ADC_R_GAIN_STATUS:
+ case DA9055_DAC_L_GAIN_STATUS:
+ case DA9055_DAC_R_GAIN_STATUS:
+ case DA9055_HP_L_GAIN_STATUS:
+ case DA9055_HP_R_GAIN_STATUS:
+ case DA9055_LINE_GAIN_STATUS:
+ case DA9055_ALC_CIC_OP_LVL_DATA:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+/* Set DAI word length */
+static int da9055_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct da9055_priv *da9055 = snd_soc_codec_get_drvdata(codec);
+ u8 aif_ctrl, fs;
+ u32 sysclk;
+
+ /* Set AIF source to Left and Right ADC */
+ snd_soc_write(codec, DA9055_DIG_ROUTING_AIF,
+ DA9055_AIF_L_SRC | DA9055_AIF_R_SRC);
+
+ aif_ctrl = snd_soc_read(codec, DA9055_AIF_CTRL) & 0xf3;
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ aif_ctrl |= DA9055_AIF_WORD_S16_LE;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ aif_ctrl |= DA9055_AIF_WORD_S20_3LE;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ aif_ctrl |= DA9055_AIF_WORD_S24_LE;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ aif_ctrl |= DA9055_AIF_WORD_S32_LE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ aif_ctrl |= (DA9055_AIF_OE | DA9055_AIF_EN);
+
+ /* Enable AIF */
+ snd_soc_write(codec, DA9055_AIF_CTRL, aif_ctrl);
+
+ switch (params_rate(params)) {
+ case 8000:
+ fs = DA9055_SR_8000;
+ sysclk = 3072000;
+ break;
+ case 11025:
+ fs = DA9055_SR_11025;
+ sysclk = 2822400;
+ break;
+ case 12000:
+ fs = DA9055_SR_12000;
+ sysclk = 3072000;
+ break;
+ case 16000:
+ fs = DA9055_SR_16000;
+ sysclk = 3072000;
+ break;
+ case 22050:
+ fs = DA9055_SR_22050;
+ sysclk = 2822400;
+ break;
+ case 32000:
+ fs = DA9055_SR_32000;
+ sysclk = 3072000;
+ break;
+ case 44100:
+ fs = DA9055_SR_44100;
+ sysclk = 2822400;
+ break;
+ case 48000:
+ fs = DA9055_SR_48000;
+ sysclk = 3072000;
+ break;
+ case 88200:
+ fs = DA9055_SR_88200;
+ sysclk = 2822400;
+ break;
+ case 96000:
+ fs = DA9055_SR_96000;
+ sysclk = 3072000;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (da9055->mclk_rate) {
+ /* PLL Mode, Write actual FS */
+ snd_soc_write(codec, DA9055_SR, fs);
+ } else {
+ /*
+ * Non-PLL Mode
+ * When PLL is bypassed, chip assumes constant MCLK of
+ * 12.288MHz and uses sample rate value to divide this MCLK
+ * to derive its sys clk. As sys clk has to be 256 * Fs, we
+ * need to write constant sample rate i.e. 48KHz.
+ */
+ snd_soc_write(codec, DA9055_SR, DA9055_SR_48000);
+ }
+
+ if (da9055->mclk_rate && (da9055->mclk_rate != sysclk)) {
+ /* PLL Mode */
+ if (!da9055->master) {
+ /* PLL slave mode, enable PLL and also SRM */
+ snd_soc_update_bits(codec, DA9055_PLL_CTRL,
+ DA9055_PLL_EN | DA9055_PLL_SRM_EN,
+ DA9055_PLL_EN | DA9055_PLL_SRM_EN);
+ } else {
+ /* PLL master mode, only enable PLL */
+ snd_soc_update_bits(codec, DA9055_PLL_CTRL,
+ DA9055_PLL_EN, DA9055_PLL_EN);
+ }
+ } else {
+ /* Non PLL Mode, disable PLL */
+ snd_soc_update_bits(codec, DA9055_PLL_CTRL, DA9055_PLL_EN, 0);
+ }
+
+ return 0;
+}
+
+/* Set DAI mode and Format */
+static int da9055_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct da9055_priv *da9055 = snd_soc_codec_get_drvdata(codec);
+ u8 aif_clk_mode, aif_ctrl;
+
+ aif_clk_mode = snd_soc_read(codec, DA9055_AIF_CLK_MODE) & 0x7c;
+ aif_ctrl = snd_soc_read(codec, DA9055_AIF_CTRL) & 0xfc;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ /* DA9055 in I2S Master Mode */
+ da9055->master = 1;
+ aif_clk_mode |= DA9055_AIF_CLK_EN_MASTER_MODE;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ /* DA9055 in I2S Slave Mode */
+ da9055->master = 0;
+ aif_clk_mode |= DA9055_AIF_CLK_EN_SLAVE_MODE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Only I2S is supported */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ aif_ctrl |= DA9055_AIF_FORMAT_I2S_MODE;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ aif_ctrl |= DA9055_AIF_FORMAT_LEFT_J;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ aif_ctrl |= DA9055_AIF_FORMAT_RIGHT_J;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* By default only 32 BCLK per WCLK is supported */
+ aif_clk_mode |= DA9055_AIF_BCLKS_PER_WCLK_32;
+
+ snd_soc_write(codec, DA9055_AIF_CLK_MODE, aif_clk_mode);
+ snd_soc_write(codec, DA9055_AIF_CTRL, aif_ctrl);
+
+ return 0;
+}
+
+static int da9055_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+
+ if (mute) {
+ snd_soc_update_bits(codec, DA9055_DAC_L_CTRL,
+ DA9055_DAC_L_MUTE_EN, DA9055_DAC_L_MUTE_EN);
+ snd_soc_update_bits(codec, DA9055_DAC_R_CTRL,
+ DA9055_DAC_R_MUTE_EN, DA9055_DAC_R_MUTE_EN);
+ } else {
+ snd_soc_update_bits(codec, DA9055_DAC_L_CTRL,
+ DA9055_DAC_L_MUTE_EN, 0);
+ snd_soc_update_bits(codec, DA9055_DAC_R_CTRL,
+ DA9055_DAC_R_MUTE_EN, 0);
+ }
+
+ return 0;
+}
+
+#define DA9055_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static int da9055_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct da9055_priv *da9055 = snd_soc_codec_get_drvdata(codec);
+
+ switch (clk_id) {
+ case DA9055_CLKSRC_MCLK:
+ switch (freq) {
+ case 11289600:
+ case 12000000:
+ case 12288000:
+ case 13000000:
+ case 13500000:
+ case 14400000:
+ case 19200000:
+ case 19680000:
+ case 19800000:
+ da9055->mclk_rate = freq;
+ return 0;
+ default:
+ dev_err(codec_dai->dev, "Unsupported MCLK value %d\n",
+ freq);
+ return -EINVAL;
+ }
+ break;
+ default:
+ dev_err(codec_dai->dev, "Unknown clock source %d\n", clk_id);
+ return -EINVAL;
+ }
+}
+
+/*
+ * da9055_set_dai_pll : Configure the codec PLL
+ * @param codec_dai : Pointer to codec DAI
+ * @param pll_id : da9055 has only one pll, so pll_id is always zero
+ * @param fref : Input MCLK frequency
+ * @param fout : FsDM value
+ * @return int : Zero for success, negative error code for error
+ *
+ * Note: Supported PLL input frequencies are 11.2896MHz, 12MHz, 12.288MHz,
+ * 13MHz, 13.5MHz, 14.4MHz, 19.2MHz, 19.6MHz and 19.8MHz
+ */
+static int da9055_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
+ int source, unsigned int fref, unsigned int fout)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct da9055_priv *da9055 = snd_soc_codec_get_drvdata(codec);
+
+ u8 pll_frac_top, pll_frac_bot, pll_integer, cnt;
+
+ /* Disable PLL before setting the divisors */
+ snd_soc_update_bits(codec, DA9055_PLL_CTRL, DA9055_PLL_EN, 0);
+
+ /* In slave mode, there is only one set of divisors */
+ if (!da9055->master)
+ fout = 2822400;
+
+ /* Search pll div array for correct divisors */
+ for (cnt = 0; cnt < ARRAY_SIZE(da9055_pll_div); cnt++) {
+ /* Check fref, mode and fout */
+ if ((fref == da9055_pll_div[cnt].fref) &&
+ (da9055->master == da9055_pll_div[cnt].mode) &&
+ (fout == da9055_pll_div[cnt].fout)) {
+ /* All match, pick up divisors */
+ pll_frac_top = da9055_pll_div[cnt].frac_top;
+ pll_frac_bot = da9055_pll_div[cnt].frac_bot;
+ pll_integer = da9055_pll_div[cnt].integer;
+ break;
+ }
+ }
+ if (cnt >= ARRAY_SIZE(da9055_pll_div))
+ goto pll_err;
+
+ /* Write PLL dividers */
+ snd_soc_write(codec, DA9055_PLL_FRAC_TOP, pll_frac_top);
+ snd_soc_write(codec, DA9055_PLL_FRAC_BOT, pll_frac_bot);
+ snd_soc_write(codec, DA9055_PLL_INTEGER, pll_integer);
+
+ return 0;
+pll_err:
+ dev_err(codec_dai->dev, "Error in setting up PLL\n");
+ return -EINVAL;
+}
+
+/* DAI operations */
+static const struct snd_soc_dai_ops da9055_dai_ops = {
+ .hw_params = da9055_hw_params,
+ .set_fmt = da9055_set_dai_fmt,
+ .set_sysclk = da9055_set_dai_sysclk,
+ .set_pll = da9055_set_dai_pll,
+ .digital_mute = da9055_mute,
+};
+
+static struct snd_soc_dai_driver da9055_dai = {
+ .name = "da9055-hifi",
+ /* Playback Capabilities */
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_96000,
+ .formats = DA9055_FORMATS,
+ },
+ /* Capture Capabilities */
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_96000,
+ .formats = DA9055_FORMATS,
+ },
+ .ops = &da9055_dai_ops,
+ .symmetric_rates = 1,
+};
+
+static int da9055_probe(struct snd_soc_codec *codec)
+{
+ struct da9055_priv *da9055 = snd_soc_codec_get_drvdata(codec);
+ int ret;
+
+ codec->control_data = da9055->regmap;
+ ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_REGMAP);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ return ret;
+ }
+
+ da9055->mclk_rate = 0; /* This will be set from set_sysclk() */
+ da9055->master = 0; /* This will be set from set_fmt() */
+
+ /* Enable all Gain Ramps */
+ snd_soc_update_bits(codec, DA9055_AUX_L_CTRL,
+ DA9055_GAIN_RAMPING_EN, DA9055_GAIN_RAMPING_EN);
+ snd_soc_update_bits(codec, DA9055_AUX_R_CTRL,
+ DA9055_GAIN_RAMPING_EN, DA9055_GAIN_RAMPING_EN);
+ snd_soc_update_bits(codec, DA9055_MIXIN_L_CTRL,
+ DA9055_GAIN_RAMPING_EN, DA9055_GAIN_RAMPING_EN);
+ snd_soc_update_bits(codec, DA9055_MIXIN_R_CTRL,
+ DA9055_GAIN_RAMPING_EN, DA9055_GAIN_RAMPING_EN);
+ snd_soc_update_bits(codec, DA9055_ADC_L_CTRL,
+ DA9055_GAIN_RAMPING_EN, DA9055_GAIN_RAMPING_EN);
+ snd_soc_update_bits(codec, DA9055_ADC_R_CTRL,
+ DA9055_GAIN_RAMPING_EN, DA9055_GAIN_RAMPING_EN);
+ snd_soc_update_bits(codec, DA9055_DAC_L_CTRL,
+ DA9055_GAIN_RAMPING_EN, DA9055_GAIN_RAMPING_EN);
+ snd_soc_update_bits(codec, DA9055_DAC_R_CTRL,
+ DA9055_GAIN_RAMPING_EN, DA9055_GAIN_RAMPING_EN);
+ snd_soc_update_bits(codec, DA9055_HP_L_CTRL,
+ DA9055_GAIN_RAMPING_EN, DA9055_GAIN_RAMPING_EN);
+ snd_soc_update_bits(codec, DA9055_HP_R_CTRL,
+ DA9055_GAIN_RAMPING_EN, DA9055_GAIN_RAMPING_EN);
+ snd_soc_update_bits(codec, DA9055_LINE_CTRL,
+ DA9055_GAIN_RAMPING_EN, DA9055_GAIN_RAMPING_EN);
+
+ /* Input side settings */
+
+ /* Enable VMID reference & master bias */
+ snd_soc_write(codec, DA9055_REFERENCES,
+ DA9055_VMID_EN | DA9055_BIAS_EN);
+
+ /* Enable Mic Bias */
+ snd_soc_write(codec, DA9055_MIC_BIAS_CTRL, DA9055_MIC_BIAS_EN);
+
+ /* Enable Left and Right input mixers */
+ snd_soc_update_bits(codec, DA9055_MIXIN_L_CTRL,
+ DA9055_MIXIN_L_MIX_EN, DA9055_MIXIN_L_MIX_EN);
+ snd_soc_update_bits(codec, DA9055_MIXIN_R_CTRL,
+ DA9055_MIXIN_R_MIX_EN, DA9055_MIXIN_R_MIX_EN);
+
+ /* Output side settings */
+
+ /* Enable Left and Right output mixers */
+ snd_soc_update_bits(codec, DA9055_MIXOUT_L_CTRL,
+ DA9055_MIXOUT_L_MIX_EN, DA9055_MIXOUT_L_MIX_EN);
+ snd_soc_update_bits(codec, DA9055_MIXOUT_R_CTRL,
+ DA9055_MIXOUT_R_MIX_EN, DA9055_MIXOUT_R_MIX_EN);
+
+ /* Enable Left and Right output Amps */
+ snd_soc_update_bits(codec, DA9055_MIXOUT_L_CTRL,
+ DA9055_MIXOUT_L_AMP_EN, DA9055_MIXOUT_L_AMP_EN);
+ snd_soc_update_bits(codec, DA9055_MIXOUT_R_CTRL,
+ DA9055_MIXOUT_R_AMP_EN, DA9055_MIXOUT_R_AMP_EN);
+
+ /* Enable the charge pump and set mode */
+ snd_soc_update_bits(codec, DA9055_CP_CTRL,
+ DA9055_CP_EN | DA9055_CP_MCHANGE,
+ DA9055_CP_EN | DA9055_CP_MCHANGE);
+
+ /* Enable Left and Right HeadPhone Output */
+ snd_soc_update_bits(codec, DA9055_HP_L_CTRL,
+ DA9055_HP_L_AMP_OE, DA9055_HP_L_AMP_OE);
+ snd_soc_update_bits(codec, DA9055_HP_R_CTRL,
+ DA9055_HP_R_AMP_OE, DA9055_HP_R_AMP_OE);
+
+ /* Enable Lineout Output Enable */
+ snd_soc_update_bits(codec, DA9055_LINE_CTRL,
+ DA9055_LINE_AMP_OE, DA9055_LINE_AMP_OE);
+
+ /* Set this as per your system configuration */
+ snd_soc_write(codec, DA9055_PLL_CTRL, DA9055_PLL_INDIV_10_20_MHZ);
+
+ return 0;
+}
+
+static struct snd_soc_codec_driver soc_codec_dev_da9055 = {
+ .probe = da9055_probe,
+
+ .controls = da9055_snd_controls,
+ .num_controls = ARRAY_SIZE(da9055_snd_controls),
+
+ .dapm_widgets = da9055_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(da9055_dapm_widgets),
+ .dapm_routes = da9055_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(da9055_audio_map),
+};
+
+static const struct regmap_config da9055_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .reg_defaults = da9055_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(da9055_reg_defaults),
+ .volatile_reg = da9055_volatile_register,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int __devinit da9055_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct da9055_priv *da9055;
+ int ret;
+
+ da9055 = devm_kzalloc(&i2c->dev, sizeof(struct da9055_priv),
+ GFP_KERNEL);
+ if (!da9055)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, da9055);
+
+ da9055->regmap = regmap_init_i2c(i2c, &da9055_regmap_config);
+ if (IS_ERR(da9055->regmap)) {
+ ret = PTR_ERR(da9055->regmap);
+ dev_err(&i2c->dev, "regmap_init() failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_register_codec(&i2c->dev,
+ &soc_codec_dev_da9055, &da9055_dai, 1);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to register da9055 codec: %d\n",
+ ret);
+ regmap_exit(da9055->regmap);
+ }
+ return ret;
+}
+
+static int __devexit da9055_remove(struct i2c_client *client)
+{
+ struct da9055_priv *da9055 = i2c_get_clientdata(client);
+
+ snd_soc_unregister_codec(&client->dev);
+ regmap_exit(da9055->regmap);
+ return 0;
+}
+
+static const struct i2c_device_id da9055_i2c_id[] = {
+ { "da9055", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, da9055_i2c_id);
+
+/* I2C codec control layer */
+static struct i2c_driver da9055_i2c_driver = {
+ .driver = {
+ .name = "da9055",
+ .owner = THIS_MODULE,
+ },
+ .probe = da9055_i2c_probe,
+ .remove = __devexit_p(da9055_remove),
+ .id_table = da9055_i2c_id,
+};
+
+module_i2c_driver(da9055_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC DA9055 Codec driver");
+MODULE_AUTHOR("David Chen, Ashish Chavan");
+MODULE_LICENSE("GPL");
--
1.7.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [alsa-devel] [PATCH] ASoC: codecs: Add DA9055 codec driver
2012-09-11 15:03 [alsa-devel] [PATCH] ASoC: codecs: Add DA9055 codec driver Ashish Chavan
@ 2012-09-12 2:57 ` Mark Brown
2012-09-12 12:56 ` Ashish Chavan
2012-09-13 12:08 ` Ashish Chavan
0 siblings, 2 replies; 7+ messages in thread
From: Mark Brown @ 2012-09-12 2:57 UTC (permalink / raw)
To: Ashish Chavan; +Cc: lrg, alsa-devel, David Dajun Chen, linux-kernel
On Tue, Sep 11, 2012 at 08:33:43PM +0530, Ashish Chavan wrote:
> +/* LDO voltage level value */
> +static const char * const da9055_ldo_lvl_select_txt[] = {
> + "1.05V", "1.1V", "1.2V", "1.4V"
> +};
> +static const struct soc_enum da9055_ldo_lvl_select =
> + SOC_ENUM_SINGLE(DA9055_LDO_CTRL, 4, 4, da9055_ldo_lvl_select_txt);
There's a regulator API, if configuration is required we should be using
that.
> +/* Digital MIC clock rate select */
> +static const char * const da9055_dmic_clk_rate_txt[] = {
> + "3MHz", "1.5MHz"
> +};
> +
> +static const struct soc_enum da9055_dmic_clk_rate =
> + SOC_ENUM_SINGLE(DA9055_MIC_CONFIG, 2, 2, da9055_dmic_clk_rate_txt);
> +
> +/* Digital MIC sample phase select */
> +static const char * const da9055_dmic_phase_txt[] = {
> + "Sample on DMICCLK edges", "Sample between DMICCLK edges"
> +};
> +
> +static const struct soc_enum da9055_dmic_phase =
> + SOC_ENUM_SINGLE(DA9055_MIC_CONFIG, 1, 2, da9055_dmic_phase_txt);
> +
> +/* Digital MIC channel select */
> +static const char * const da9055_dmic_channel_select_txt[] = {
> + "Rising Left Falling Right", "Falling Left Rising Right"
> +};
Why is any of this being exposed to userspace? If this should be
configured I'd expect it to be static platform data, not something that
gets changed at runtime.
> +/* MIC bias voltage level select */
> +static const char * const da9055_mic_bias_level_txt[] = {
> + "1.6V", "1.8V", "2.1V", "2.2V"
> +};
Again, why is this being exposed to userspace/ I'm fairly sure we went
through similar stuff with your last driver...
> + SOC_DOUBLE_R_TLV("HeadPhone Volume",
> + DA9055_HP_L_GAIN, DA9055_HP_R_GAIN,
> + 0, 0x3f, 0, hp_vol_tlv),
Headphone.
> + /* Mute controls */
> + SOC_DOUBLE_R("Mic Mute Switch", DA9055_MIC_L_CTRL,
> + DA9055_MIC_R_CTRL, 6, 1, 0),
> + SOC_DOUBLE_R("Aux Mute Switch", DA9055_AUX_L_CTRL,
> + DA9055_AUX_R_CTRL, 6, 1, 0),
> + SOC_DOUBLE_R("Mixin PGA Mute Switch", DA9055_MIXIN_L_CTRL,
> + DA9055_MIXIN_R_CTRL, 6, 1, 0),
> + SOC_DOUBLE_R("ADC Mute Switch", DA9055_ADC_L_CTRL,
> + DA9055_ADC_R_CTRL, 6, 1, 0),
> + SOC_DOUBLE_R("HeadPhone Mute Switch", DA9055_HP_L_CTRL,
> + DA9055_HP_R_CTRL, 6, 1, 0),
> + SOC_SINGLE("Lineout Mute Switch", DA9055_LINE_CTRL, 6, 1, 0),
> + SOC_SINGLE("DAC Soft Mute Switch", DA9055_DAC_FILTERS5, 7, 1, 0),
No "Mute". Again, I'm fairly sure we had the same issue last time.
> + /* LDO control */
> + SOC_SINGLE("LDO Enable", DA9055_LDO_CTRL, 7, 1, 0),
> + SOC_ENUM("LDO Level Select", da9055_ldo_lvl_select),
The LDO enable should absolutely not be being exposed to userspace!
> + /* DMIC controls */
> + SOC_DOUBLE_R("DMIC Enable", DA9055_MIXIN_L_SELECT,
> + DA9055_MIXIN_R_SELECT, 7, 1, 0),
Switch if this is a mute.
> + /* MIC PGA input selection controls */
> + SOC_ENUM("Mic Left Input Select", da9055_mic_l_select),
> + SOC_ENUM("Mic Right Input Select", da9055_mic_r_select),
DAPM.
> +
> + /* ALC Controls */
> + SOC_DOUBLE_EXT("ALC Enable", DA9055_ALC_CTRL1, 3, 7, 1, 0,
> + snd_soc_get_volsw, da9055_put_alc_sw),
ALC Switch. All enable controls should be switches.
> +static int da9055_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params,
> + struct snd_soc_dai *dai)
> +{
> + struct snd_soc_codec *codec = dai->codec;
> + struct da9055_priv *da9055 = snd_soc_codec_get_drvdata(codec);
> + u8 aif_ctrl, fs;
> + u32 sysclk;
> +
> + /* Set AIF source to Left and Right ADC */
> + snd_soc_write(codec, DA9055_DIG_ROUTING_AIF,
> + DA9055_AIF_L_SRC | DA9055_AIF_R_SRC);
This should be in DAPM.
> + aif_ctrl = snd_soc_read(codec, DA9055_AIF_CTRL) & 0xf3;
Use snd_soc_update_bits() later on.
> + aif_ctrl |= (DA9055_AIF_OE | DA9055_AIF_EN);
DAPM.
> + /* In slave mode, there is only one set of divisors */
> + if (!da9055->master)
> + fout = 2822400;
Should check the user supplied this value - also, what happens if the
user sets the device to slave mode after setting up the PLL?
> + /* Enable VMID reference & master bias */
> + snd_soc_write(codec, DA9055_REFERENCES,
> + DA9055_VMID_EN | DA9055_BIAS_EN);
set_bias_level()
> + /* Enable Mic Bias */
> + snd_soc_write(codec, DA9055_MIC_BIAS_CTRL, DA9055_MIC_BIAS_EN);
DAPM for this and most of the rest of this funciton.
> + da9055->regmap = regmap_init_i2c(i2c, &da9055_regmap_config);
devm_regmap_init_i2c()
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [alsa-devel] [PATCH] ASoC: codecs: Add DA9055 codec driver
2012-09-12 12:56 ` Ashish Chavan
@ 2012-09-12 12:49 ` Mark Brown
2012-09-12 13:40 ` Ashish P. Chavan
0 siblings, 1 reply; 7+ messages in thread
From: Mark Brown @ 2012-09-12 12:49 UTC (permalink / raw)
To: Ashish Chavan; +Cc: lrg, alsa-devel, linux-kernel, David Dajun Chen
On Wed, Sep 12, 2012 at 06:26:18PM +0530, Ashish Chavan wrote:
> On Wed, 2012-09-12 at 10:57 +0800, Mark Brown wrote:
> > Why is any of this being exposed to userspace? If this should be
> > configured I'd expect it to be static platform data, not something that
> > gets changed at runtime.
> These parameters are exposed considering the fact that DMIC itself is
> not part of the codec. Codec only provides DMIC interface using which an
> external DMIC can be attached. These parameters depend on the actual
> DMIC hardware and hence kept configurable to allow runtime plug in of
> any DMIC hardware. Doesn't it make sense to keep them runtime
> configurable?
No. The only realistic way to attach a new DMIC to a board is to solder
it down, that's not something people are going to do while the system is
actve. It's something that's fixed at PCB design time.
> > > + /* In slave mode, there is only one set of divisors */
> > > + if (!da9055->master)
> > > + fout = 2822400;
> > Should check the user supplied this value
> Can you explain which value / user supplied value you are referring to?
> It is not quite clear to me.
The specified output frequency, you just totally ignore it.
> For other things like input mixers, Headphone and Lineouts, DAPM is
> already used to control power specific bits. The confusion is because
> there are two separate control bits for these blocks. One bit is for
> "Enabling" that block and other is for "Enabling Amplifier" of that
> block.
> e.g for headphone, one bit is for "output enable" while other is for
> "output amplifier enable".
So document this.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [alsa-devel] [PATCH] ASoC: codecs: Add DA9055 codec driver
2012-09-12 2:57 ` Mark Brown
@ 2012-09-12 12:56 ` Ashish Chavan
2012-09-12 12:49 ` Mark Brown
2012-09-13 12:08 ` Ashish Chavan
1 sibling, 1 reply; 7+ messages in thread
From: Ashish Chavan @ 2012-09-12 12:56 UTC (permalink / raw)
To: Mark Brown; +Cc: lrg, alsa-devel, linux-kernel, David Dajun Chen
On Wed, 2012-09-12 at 10:57 +0800, Mark Brown wrote:
> > +/* Digital MIC clock rate select */
> > +static const char * const da9055_dmic_clk_rate_txt[] = {
> > + "3MHz", "1.5MHz"
> > +};
> > +
> > +static const struct soc_enum da9055_dmic_clk_rate =
> > + SOC_ENUM_SINGLE(DA9055_MIC_CONFIG, 2, 2, da9055_dmic_clk_rate_txt);
> > +
> > +/* Digital MIC sample phase select */
> > +static const char * const da9055_dmic_phase_txt[] = {
> > + "Sample on DMICCLK edges", "Sample between DMICCLK edges"
> > +};
> > +
> > +static const struct soc_enum da9055_dmic_phase =
> > + SOC_ENUM_SINGLE(DA9055_MIC_CONFIG, 1, 2, da9055_dmic_phase_txt);
> > +
> > +/* Digital MIC channel select */
> > +static const char * const da9055_dmic_channel_select_txt[] = {
> > + "Rising Left Falling Right", "Falling Left Rising Right"
> > +};
>
> Why is any of this being exposed to userspace? If this should be
> configured I'd expect it to be static platform data, not something that
> gets changed at runtime.
>
These parameters are exposed considering the fact that DMIC itself is
not part of the codec. Codec only provides DMIC interface using which an
external DMIC can be attached. These parameters depend on the actual
DMIC hardware and hence kept configurable to allow runtime plug in of
any DMIC hardware. Doesn't it make sense to keep them runtime
configurable?
>
> > + /* In slave mode, there is only one set of divisors */
> > + if (!da9055->master)
> > + fout = 2822400;
>
> Should check the user supplied this value
Can you explain which value / user supplied value you are referring to?
It is not quite clear to me.
> - also, what happens if the
> user sets the device to slave mode after setting up the PLL?
Will add required checks in set_fmt().
> > + /* Enable Mic Bias */
> > + snd_soc_write(codec, DA9055_MIC_BIAS_CTRL, DA9055_MIC_BIAS_EN);
>
> DAPM for this and most of the rest of this funciton.
I guess here a DAPM_SUPPLY widget should be used and its routing should
be part of machine driver instead of this codec driver, right?
For other things like input mixers, Headphone and Lineouts, DAPM is
already used to control power specific bits. The confusion is because
there are two separate control bits for these blocks. One bit is for
"Enabling" that block and other is for "Enabling Amplifier" of that
block.
e.g for headphone, one bit is for "output enable" while other is for
"output amplifier enable".
Chip designers have confirmed that "Amplifier Enable" bits are ones
which should be used for power management. This is the reason why
"Enable" bits are being set in probe() and "Amplifier Enable" bits are
being taken care by DAPM. May be I need to put enough comments in code
to clarify this.
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: [alsa-devel] [PATCH] ASoC: codecs: Add DA9055 codec driver
2012-09-12 12:49 ` Mark Brown
@ 2012-09-12 13:40 ` Ashish P. Chavan
0 siblings, 0 replies; 7+ messages in thread
From: Ashish P. Chavan @ 2012-09-12 13:40 UTC (permalink / raw)
To: Mark Brown; +Cc: lrg, alsa-devel, linux-kernel, David Dajun Chen
FYI.
-----Original Message-----
From: Mark Brown [mailto:broonie@opensource.wolfsonmicro.com]
Sent: Wednesday, September 12, 2012 6:20 PM
To: Ashish P. Chavan
Cc: lrg; alsa-devel; linux-kernel; David Dajun Chen
Subject: Re: [alsa-devel] [PATCH] ASoC: codecs: Add DA9055 codec driver
On Wed, Sep 12, 2012 at 06:26:18PM +0530, Ashish Chavan wrote:
> On Wed, 2012-09-12 at 10:57 +0800, Mark Brown wrote:
> > Why is any of this being exposed to userspace? If this should be
> > configured I'd expect it to be static platform data, not something
> > that gets changed at runtime.
> These parameters are exposed considering the fact that DMIC itself is
> not part of the codec. Codec only provides DMIC interface using which
> an external DMIC can be attached. These parameters depend on the
> actual DMIC hardware and hence kept configurable to allow runtime plug
> in of any DMIC hardware. Doesn't it make sense to keep them runtime
> configurable?
No. The only realistic way to attach a new DMIC to a board is to solder it down, that's not something people are going to do while the system is actve. It's something that's fixed at PCB design time.
> > > + /* In slave mode, there is only one set of divisors */
> > > + if (!da9055->master)
> > > + fout = 2822400;
> > Should check the user supplied this value
> Can you explain which value / user supplied value you are referring to?
> It is not quite clear to me.
The specified output frequency, you just totally ignore it.
> For other things like input mixers, Headphone and Lineouts, DAPM is
> already used to control power specific bits. The confusion is because
> there are two separate control bits for these blocks. One bit is for
> "Enabling" that block and other is for "Enabling Amplifier" of that
> block.
> e.g for headphone, one bit is for "output enable" while other is for
> "output amplifier enable".
So document this.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [alsa-devel] [PATCH] ASoC: codecs: Add DA9055 codec driver
2012-09-13 12:08 ` Ashish Chavan
@ 2012-09-13 12:03 ` Mark Brown
0 siblings, 0 replies; 7+ messages in thread
From: Mark Brown @ 2012-09-13 12:03 UTC (permalink / raw)
To: Ashish Chavan; +Cc: lrg, alsa-devel, David Dajun Chen, linux-kernel
On Thu, Sep 13, 2012 at 05:38:36PM +0530, Ashish Chavan wrote:
> On Wed, 2012-09-12 at 10:57 +0800, Mark Brown wrote:
> > > + aif_ctrl |= (DA9055_AIF_OE | DA9055_AIF_EN);
> > DAPM.
> Here the trouble in making it DAPM based is that there is no separate
> control for AIF input and output. It is confirmed that AIF_EN is the
> master control bit, which enables both output as well as input. The AIF
> _OE bit is redundant. If we use the same control bit(i.e AIF_EN) for
> both DAPM_AIF_IN and DAPM_AIF_OUT, there will be obvious side effects.
> Is there any other way to take care of this? Or should we leave it
> outside DAPM?
Use a supply widget.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [alsa-devel] [PATCH] ASoC: codecs: Add DA9055 codec driver
2012-09-12 2:57 ` Mark Brown
2012-09-12 12:56 ` Ashish Chavan
@ 2012-09-13 12:08 ` Ashish Chavan
2012-09-13 12:03 ` Mark Brown
1 sibling, 1 reply; 7+ messages in thread
From: Ashish Chavan @ 2012-09-13 12:08 UTC (permalink / raw)
To: Mark Brown; +Cc: lrg, alsa-devel, David Dajun Chen, linux-kernel
On Wed, 2012-09-12 at 10:57 +0800, Mark Brown wrote:
>
> > + aif_ctrl |= (DA9055_AIF_OE | DA9055_AIF_EN);
>
> DAPM.
Here the trouble in making it DAPM based is that there is no separate
control for AIF input and output. It is confirmed that AIF_EN is the
master control bit, which enables both output as well as input. The AIF
_OE bit is redundant. If we use the same control bit(i.e AIF_EN) for
both DAPM_AIF_IN and DAPM_AIF_OUT, there will be obvious side effects.
Is there any other way to take care of this? Or should we leave it
outside DAPM?
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2012-09-13 12:04 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-09-11 15:03 [alsa-devel] [PATCH] ASoC: codecs: Add DA9055 codec driver Ashish Chavan
2012-09-12 2:57 ` Mark Brown
2012-09-12 12:56 ` Ashish Chavan
2012-09-12 12:49 ` Mark Brown
2012-09-12 13:40 ` Ashish P. Chavan
2012-09-13 12:08 ` Ashish Chavan
2012-09-13 12:03 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).