RE: cpufreq doesn't work with my Intel Pentium M processor in 2.6.17

RE: cpufreq doesn't work with my Intel Pentium M processor in 2.6.17

[Pallipadi, Venkatesh]

Can you send me the acpidump output from this system using the latest pmtools from here.
http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/

Better still, if you can open a bugzilla at http://bugme.osdl.org 
That will help tracking this one better.

Thanks,
Venki  

>-----Original Message-----
>From: CIJOML [mailto:cijoml@volny.cz] 
>Sent: Wednesday, June 21, 2006 11:34 PM
>To: Pallipadi, Venkatesh; linux-kernel@vger.kernel.org; 
>Brodowski, Dominik; cpufreq@lists.linux.org.uk
>Subject: Re: cpufreq doesn't work with my Intel Pentium M 
>processor in 2.6.17
>
>Hi Pallipadi,
>
>no change:
>
>#find /sys -name *freq*
>/sys/module/acpi_cpufreq
>
>no tuning options as you can see
>module is compiled into kernel
>
>Michal
>
>Dne středa 21 červen 2006 21:27 jste napsal(a):
>> >-----Original Message-----
>> >From: linux-kernel-owner@vger.kernel.org
>> >[mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of CIJOML
>> >Sent: Sunday, June 18, 2006 11:06 PM
>> >To: linux-kernel@vger.kernel.org
>> >Subject: cpufreq doesn't work with my Intel Pentium M
>> >processor in 2.6.17
>> >
>> >Hello team,
>> >
>> >I compiled 2.6.17 and now I see, that cpufreq doesn't work
>> >with 2.6.17 (2.6.16
>> >was fine).
>> >
>> >My cpu:
>> >Intel(R) Pentium(R) M processor 1.70GHz
>> >cpu family 6
>> >model 13
>> >stepping 6
>> >
>> >Cpufreq doesn't start and also /sys files are not present/created
>> >
>> >My config:
>> >[*] CPU Frequency scaling
>> ><*> CPU frequency translation statistics
>> >[*] CPU frequency translation statistics details
>> >governors: <*> performance, powersave, ondemand, conservative
>> ><*> Intel Enhanced SpeedStep
>> >[*] Use ACPI tables to decode valid frequency/voltage pairs
>> >[*] Built-in tables for Banias CPUs
>>
>> Can you also try
>> [*] ACPI Processor P-states driver
>>
>> In the same config menu.
>>
>> Thanks,
>> Venki
>

Re: cpufreq doesn't work with my Intel Pentium M processor in 2.6.17

[CIJOML]

Hi Pallipadi,

I have created kernel bug report:

http://bugzilla.kernel.org/show_bug.cgi?id=6765

Let me know, if you need more informations.

Best regards

Michal

Dne sobota 24 červen 2006 16:33 Pallipadi, Venkatesh napsal(a):
> Can you send me the acpidump output from this system using the latest
> pmtools from here.
> http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/
>
> Better still, if you can open a bugzilla at http://bugme.osdl.org
> That will help tracking this one better.
>
> Thanks,
> Venki
>
> >-----Original Message-----
> >From: CIJOML [mailto:cijoml@volny.cz]
> >Sent: Wednesday, June 21, 2006 11:34 PM
> >To: Pallipadi, Venkatesh; linux-kernel@vger.kernel.org;
> >Brodowski, Dominik; cpufreq@lists.linux.org.uk
> >Subject: Re: cpufreq doesn't work with my Intel Pentium M
> >processor in 2.6.17
> >
> >Hi Pallipadi,
> >
> >no change:
> >
> >#find /sys -name *freq*
> >/sys/module/acpi_cpufreq
> >
> >no tuning options as you can see
> >module is compiled into kernel
> >
> >Michal
> >
> >Dne středa 21 červen 2006 21:27 jste napsal(a):
> >> >-----Original Message-----
> >> >From: linux-kernel-owner@vger.kernel.org
> >> >[mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of CIJOML
> >> >Sent: Sunday, June 18, 2006 11:06 PM
> >> >To: linux-kernel@vger.kernel.org
> >> >Subject: cpufreq doesn't work with my Intel Pentium M
> >> >processor in 2.6.17
> >> >
> >> >Hello team,
> >> >
> >> >I compiled 2.6.17 and now I see, that cpufreq doesn't work
> >> >with 2.6.17 (2.6.16
> >> >was fine).
> >> >
> >> >My cpu:
> >> >Intel(R) Pentium(R) M processor 1.70GHz
> >> >cpu family 6
> >> >model 13
> >> >stepping 6
> >> >
> >> >Cpufreq doesn't start and also /sys files are not present/created
> >> >
> >> >My config:
> >> >[*] CPU Frequency scaling
> >> ><*> CPU frequency translation statistics
> >> >[*] CPU frequency translation statistics details
> >> >governors: <*> performance, powersave, ondemand, conservative
> >> ><*> Intel Enhanced SpeedStep
> >> >[*] Use ACPI tables to decode valid frequency/voltage pairs
> >> >[*] Built-in tables for Banias CPUs
> >>
> >> Can you also try
> >> [*] ACPI Processor P-states driver
> >>
> >> In the same config menu.
> >>
> >> Thanks,
> >> Venki

Re: cpufreq doesn't work with my Intel Pentium M processor in 2.6.17

[CIJOML]

Hi Pallipadi,

no change:

#find /sys -name *freq*
/sys/module/acpi_cpufreq

no tuning options as you can see
module is compiled into kernel

Michal

Dne středa 21 červen 2006 21:27 jste napsal(a):
> >-----Original Message-----
> >From: linux-kernel-owner@vger.kernel.org
> >[mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of CIJOML
> >Sent: Sunday, June 18, 2006 11:06 PM
> >To: linux-kernel@vger.kernel.org
> >Subject: cpufreq doesn't work with my Intel Pentium M
> >processor in 2.6.17
> >
> >Hello team,
> >
> >I compiled 2.6.17 and now I see, that cpufreq doesn't work
> >with 2.6.17 (2.6.16
> >was fine).
> >
> >My cpu:
> >Intel(R) Pentium(R) M processor 1.70GHz
> >cpu family 6
> >model 13
> >stepping 6
> >
> >Cpufreq doesn't start and also /sys files are not present/created
> >
> >My config:
> >[*] CPU Frequency scaling
> ><*> CPU frequency translation statistics
> >[*] CPU frequency translation statistics details
> >governors: <*> performance, powersave, ondemand, conservative
> ><*> Intel Enhanced SpeedStep
> >[*] Use ACPI tables to decode valid frequency/voltage pairs
> >[*] Built-in tables for Banias CPUs
>
> Can you also try
> [*] ACPI Processor P-states driver
>
> In the same config menu.
>
> Thanks,
> Venki

RE: cpufreq doesn't work with my Intel Pentium M processor in 2.6.17

[Pallipadi, Venkatesh]

 

>-----Original Message-----
>From: linux-kernel-owner@vger.kernel.org 
>[mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of CIJOML
>Sent: Sunday, June 18, 2006 11:06 PM
>To: linux-kernel@vger.kernel.org
>Subject: cpufreq doesn't work with my Intel Pentium M 
>processor in 2.6.17
>
>Hello team,
>
>I compiled 2.6.17 and now I see, that cpufreq doesn't work 
>with 2.6.17 (2.6.16 
>was fine).
>
>My cpu:
>Intel(R) Pentium(R) M processor 1.70GHz
>cpu family 6
>model 13
>stepping 6
>
>Cpufreq doesn't start and also /sys files are not present/created
>
>My config:
>[*] CPU Frequency scaling
><*> CPU frequency translation statistics
>[*] CPU frequency translation statistics details
>governors: <*> performance, powersave, ondemand, conservative
><*> Intel Enhanced SpeedStep
>[*] Use ACPI tables to decode valid frequency/voltage pairs
>[*] Built-in tables for Banias CPUs 

Can you also try 
[*] ACPI Processor P-states driver

In the same config menu.

Thanks,
Venki

Re: cpufreq doesn't work with my Intel Pentium M processor in 2.6.17

[CIJOML]

Hi Dominik,

nice to hear you again! :) My problem is, there is nothink related to cpufreq 
in dmesg with 2.6.17. Only identification of my CPU, but no line saying 
cpufreq :(

Michal

Dne pondělí 19 červen 2006 08:28 jste napsal(a):
> Hi,
>
> On Mon, Jun 19, 2006 at 08:06:06AM +0200, CIJOML wrote:
> > I compiled 2.6.17 and now I see, that cpufreq doesn't work with 2.6.17
> > (2.6.16 was fine).
>
> Could you post the output of "dmesg" please, preferrably to the cpufreq
> mailing list: cpufreq at lists dot linux dot org dot uk
>
> > Thank you for fixing this in 2.6.17.1
>
> We will try ;)
>
> 	Dominik

Re: cpufreq doesn't work with my Intel Pentium M processor in 2.6.17

[Dominik Brodowski]

Hi,

On Mon, Jun 19, 2006 at 08:06:06AM +0200, CIJOML wrote:
> I compiled 2.6.17 and now I see, that cpufreq doesn't work with 2.6.17 (2.6.16 
> was fine).

Could you post the output of "dmesg" please, preferrably to the cpufreq
mailing list: cpufreq at lists dot linux dot org dot uk

> Thank you for fixing this in 2.6.17.1
We will try ;)

	Dominik

cpufreq doesn't work with my Intel Pentium M processor in 2.6.17

[CIJOML]

Hello team,

I compiled 2.6.17 and now I see, that cpufreq doesn't work with 2.6.17 (2.6.16 
was fine).

My cpu:
Intel(R) Pentium(R) M processor 1.70GHz
cpu family 6
model 13
stepping 6

Cpufreq doesn't start and also /sys files are not present/created

My config:
[*] CPU Frequency scaling
<*> CPU frequency translation statistics
[*] CPU frequency translation statistics details
governors: <*> performance, powersave, ondemand, conservative
<*> Intel Enhanced SpeedStep
[*] Use ACPI tables to decode valid frequency/voltage pairs
[*] Built-in tables for Banias CPUs 

Thank you for fixing this in 2.6.17.1

Best regards

Michal