* [PATCH] Bluetooth: btusb: WBS support USB alternate setting 1
@ 2020-06-29 6:03 hildawu
2020-06-29 6:19 ` Marcel Holtmann
0 siblings, 1 reply; 2+ messages in thread
From: hildawu @ 2020-06-29 6:03 UTC (permalink / raw)
To: marcel
Cc: johan.hedberg, matthias.bgg, linux-bluetooth, linux-kernel,
linux-arm-kernel, linux-mediatek, max.chou, alex_lu, kidman
From: Hilda Wu <hildawu@realtek.com>
For WBS support, btusb driver could be set to alternate setting 1.
Signed-off-by: Hilda Wu <hildawu@realtek.com>
---
drivers/bluetooth/btusb.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c7cc8e594166..7942f9314fd7 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -453,6 +453,7 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
#define BTUSB_HW_RESET_ACTIVE 12
#define BTUSB_TX_WAIT_VND_EVT 13
#define BTUSB_WAKEUP_DISABLE 14
+#define BTUSB_WBS_ALT1 15
struct btusb_data {
struct hci_dev *hdev;
@@ -1666,14 +1667,18 @@ static void btusb_work(struct work_struct *work)
new_alts = data->sco_num;
}
} else if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_TRANSP) {
-
- data->usb_alt6_packet_flow = true;
-
/* Check if Alt 6 is supported for Transparent audio */
- if (btusb_find_altsetting(data, 6))
+ if (btusb_find_altsetting(data, 6)) {
+ data->usb_alt6_packet_flow = true;
new_alts = 6;
- else
+ } else if (test_bit(BTUSB_WBS_ALT1, &data->flags)) {
+ if (btusb_find_altsetting(data, 1))
+ new_alts = 1;
+ else
+ bt_dev_err(hdev, "Device does not support ALT setting 1");
+ } else {
bt_dev_err(hdev, "Device does not support ALT setting 6");
+ }
}
if (btusb_switch_alt_setting(hdev, new_alts) < 0)
@@ -3965,6 +3970,7 @@ static int btusb_probe(struct usb_interface *intf,
* (DEVICE_REMOTE_WAKEUP)
*/
set_bit(BTUSB_WAKEUP_DISABLE, &data->flags);
+ set_bit(BTUSB_WBS_ALT1, &data->flags);
err = usb_autopm_get_interface(intf);
if (err < 0)
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] Bluetooth: btusb: WBS support USB alternate setting 1
2020-06-29 6:03 [PATCH] Bluetooth: btusb: WBS support USB alternate setting 1 hildawu
@ 2020-06-29 6:19 ` Marcel Holtmann
0 siblings, 0 replies; 2+ messages in thread
From: Marcel Holtmann @ 2020-06-29 6:19 UTC (permalink / raw)
To: hildawu
Cc: Johan Hedberg, Matthias Brugger, BlueZ, kernel list,
linux-arm-kernel, linux-mediatek, max.chou, alex_lu, kidman
Hi Hilda,
> For WBS support, btusb driver could be set to alternate setting 1.
please be more descriptive since this is special for Realtek devices.
>
> Signed-off-by: Hilda Wu <hildawu@realtek.com>
> ---
> drivers/bluetooth/btusb.c | 16 +++++++++++-----
> 1 file changed, 11 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index c7cc8e594166..7942f9314fd7 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -453,6 +453,7 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
> #define BTUSB_HW_RESET_ACTIVE 12
> #define BTUSB_TX_WAIT_VND_EVT 13
> #define BTUSB_WAKEUP_DISABLE 14
> +#define BTUSB_WBS_ALT1 15
Use BTUSB_USE_ALT1_FOR_WBS as a more descriptive name.
>
> struct btusb_data {
> struct hci_dev *hdev;
> @@ -1666,14 +1667,18 @@ static void btusb_work(struct work_struct *work)
> new_alts = data->sco_num;
> }
> } else if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_TRANSP) {
> -
> - data->usb_alt6_packet_flow = true;
> -
> /* Check if Alt 6 is supported for Transparent audio */
> - if (btusb_find_altsetting(data, 6))
> + if (btusb_find_altsetting(data, 6)) {
> + data->usb_alt6_packet_flow = true;
> new_alts = 6;
> - else
> + } else if (test_bit(BTUSB_WBS_ALT1, &data->flags)) {
> + if (btusb_find_altsetting(data, 1))
> + new_alts = 1;
> + else
> + bt_dev_err(hdev, "Device does not support ALT setting 1");
Scrap this check and error and move it into the probe() function if you actually have Realtek hardware that does not support alternate setting 1.
> + } else {
> bt_dev_err(hdev, "Device does not support ALT setting 6");
> + }
> }
>
> if (btusb_switch_alt_setting(hdev, new_alts) < 0)
> @@ -3965,6 +3970,7 @@ static int btusb_probe(struct usb_interface *intf,
> * (DEVICE_REMOTE_WAKEUP)
> */
> set_bit(BTUSB_WAKEUP_DISABLE, &data->flags);
> + set_bit(BTUSB_WBS_ALT1, &data->flags);
>
> err = usb_autopm_get_interface(intf);
> if (err < 0)
Regards
Marcel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-06-29 21:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-29 6:03 [PATCH] Bluetooth: btusb: WBS support USB alternate setting 1 hildawu
2020-06-29 6:19 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).