[PATCH v3 3/5] media: hantro: Use output buffer width and height for H264 decoding

[Jonas Karlman <jonas@kwiboo.se>]

Calculations for motion vector buffer offset is based on width and height
from the configured output format, lets use the same values for macroblock
width and height hw regs.

Fixes: dea0a82f3d22 ("media: hantro: Add support for H264 decoding on G1")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
Changes in v3:
  - change to use src_fmt instead of dst_fmt (Boris)
Changes in v2:
  - new patch split from "media: hantro: Fix H264 motion vector buffer offset"
---
 drivers/staging/media/hantro/hantro_g1_h264_dec.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/media/hantro/hantro_g1_h264_dec.c b/drivers/staging/media/hantro/hantro_g1_h264_dec.c
index 30d977c3d529..27d40d8d3728 100644
--- a/drivers/staging/media/hantro/hantro_g1_h264_dec.c
+++ b/drivers/staging/media/hantro/hantro_g1_h264_dec.c
@@ -51,8 +51,8 @@ static void set_params(struct hantro_ctx *ctx)
 	vdpu_write_relaxed(vpu, reg, G1_REG_DEC_CTRL0);
 
 	/* Decoder control register 1. */
-	reg = G1_REG_DEC_CTRL1_PIC_MB_WIDTH(sps->pic_width_in_mbs_minus1 + 1) |
-	      G1_REG_DEC_CTRL1_PIC_MB_HEIGHT_P(sps->pic_height_in_map_units_minus1 + 1) |
+	reg = G1_REG_DEC_CTRL1_PIC_MB_WIDTH(MB_WIDTH(ctx->src_fmt.width)) |
+	      G1_REG_DEC_CTRL1_PIC_MB_HEIGHT_P(MB_HEIGHT(ctx->src_fmt.height)) |
 	      G1_REG_DEC_CTRL1_REF_FRAMES(sps->max_num_ref_frames);
 	vdpu_write_relaxed(vpu, reg, G1_REG_DEC_CTRL1);
 
-- 
2.17.1