* [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a channel for I/O requests
@ 2018-01-24 22:14 Michael Kelley (EOSG)
2018-01-24 22:37 ` Michael Kelley (EOSG)
2018-02-07 0:39 ` Martin K. Petersen
0 siblings, 2 replies; 6+ messages in thread
From: Michael Kelley (EOSG) @ 2018-01-24 22:14 UTC (permalink / raw)
To: KY Srinivasan, Stephen Hemminger, martin.petersen, longi,
JBottomley, devel, linux-kernel, linux-scsi
Cc: Michael Kelley (EOSG)
Update the algorithm in storvsc_do_io to look for a channel
starting with the current CPU + 1 and wrap around (within the
current NUMA node). This spreads VMbus interrupts more evenly
across CPUs. Previous code always started with first CPU in
the current NUMA node, skewing the interrupt load to that CPU.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
---
drivers/scsi/storvsc_drv.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index e07907d..f3264c4 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1310,7 +1310,8 @@ static int storvsc_do_io(struct hv_device *device,
*/
cpumask_and(&alloced_mask, &stor_device->alloced_cpus,
cpumask_of_node(cpu_to_node(q_num)));
- for_each_cpu(tgt_cpu, &alloced_mask) {
+ for_each_cpu_wrap(tgt_cpu, &alloced_mask,
+ outgoing_channel->target_cpu + 1) {
if (tgt_cpu != outgoing_channel->target_cpu) {
outgoing_channel =
stor_device->stor_chns[tgt_cpu];
--
1.8.3.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* RE: [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a channel for I/O requests
2018-01-24 22:14 [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a channel for I/O requests Michael Kelley (EOSG)
@ 2018-01-24 22:37 ` Michael Kelley (EOSG)
2018-01-31 20:22 ` Long Li
2018-02-07 0:39 ` Martin K. Petersen
1 sibling, 1 reply; 6+ messages in thread
From: Michael Kelley (EOSG) @ 2018-01-24 22:37 UTC (permalink / raw)
To: KY Srinivasan, Stephen Hemminger, martin.petersen, Long Li,
devel, linux-kernel, linux-scsi, James E . J . Bottomley
Updated/corrected two email addresses ...
> -----Original Message-----
> From: Michael Kelley (EOSG)
> Sent: Wednesday, January 24, 2018 2:14 PM
> To: KY Srinivasan <kys@microsoft.com>; Stephen Hemminger <sthemmin@microsoft.com>;
> martin.petersen@oracle.com; longi@microsoft.com; JBottomley@odin.com;
> devel@linuxdriverproject.org; linux-kernel@vger.kernel.org; linux-scsi@vger.kernel.org
> Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
> Subject: [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a channel for I/O requests
>
> Update the algorithm in storvsc_do_io to look for a channel
> starting with the current CPU + 1 and wrap around (within the
> current NUMA node). This spreads VMbus interrupts more evenly
> across CPUs. Previous code always started with first CPU in
> the current NUMA node, skewing the interrupt load to that CPU.
>
> Signed-off-by: Michael Kelley <mikelley@microsoft.com>
> ---
> drivers/scsi/storvsc_drv.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
> index e07907d..f3264c4 100644
> --- a/drivers/scsi/storvsc_drv.c
> +++ b/drivers/scsi/storvsc_drv.c
> @@ -1310,7 +1310,8 @@ static int storvsc_do_io(struct hv_device *device,
> */
> cpumask_and(&alloced_mask, &stor_device->alloced_cpus,
> cpumask_of_node(cpu_to_node(q_num)));
> - for_each_cpu(tgt_cpu, &alloced_mask) {
> + for_each_cpu_wrap(tgt_cpu, &alloced_mask,
> + outgoing_channel->target_cpu + 1) {
> if (tgt_cpu != outgoing_channel->target_cpu) {
> outgoing_channel =
> stor_device->stor_chns[tgt_cpu];
> --
> 1.8.3.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a channel for I/O requests
2018-01-24 22:37 ` Michael Kelley (EOSG)
@ 2018-01-31 20:22 ` Long Li
2018-01-31 21:14 ` Michael Kelley (EOSG)
0 siblings, 1 reply; 6+ messages in thread
From: Long Li @ 2018-01-31 20:22 UTC (permalink / raw)
To: Michael Kelley (EOSG),
KY Srinivasan, Stephen Hemminger, martin.petersen, devel,
linux-kernel, linux-scsi, James E . J . Bottomley
> Subject: RE: [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a
> channel for I/O requests
>
> Updated/corrected two email addresses ...
>
> > -----Original Message-----
> > From: Michael Kelley (EOSG)
> > Sent: Wednesday, January 24, 2018 2:14 PM
> > To: KY Srinivasan <kys@microsoft.com>; Stephen Hemminger
> > <sthemmin@microsoft.com>; martin.petersen@oracle.com;
> > longi@microsoft.com; JBottomley@odin.com;
> > devel@linuxdriverproject.org; linux-kernel@vger.kernel.org;
> > linux-scsi@vger.kernel.org
> > Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
> > Subject: [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a
> > channel for I/O requests
> >
> > Update the algorithm in storvsc_do_io to look for a channel starting
> > with the current CPU + 1 and wrap around (within the current NUMA
> > node). This spreads VMbus interrupts more evenly across CPUs. Previous
> > code always started with first CPU in the current NUMA node, skewing
> > the interrupt load to that CPU.
> >
> > Signed-off-by: Michael Kelley <mikelley@microsoft.com>
> > ---
> > drivers/scsi/storvsc_drv.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
> > index e07907d..f3264c4 100644
> > --- a/drivers/scsi/storvsc_drv.c
> > +++ b/drivers/scsi/storvsc_drv.c
> > @@ -1310,7 +1310,8 @@ static int storvsc_do_io(struct hv_device *device,
> > */
> > cpumask_and(&alloced_mask, &stor_device-
> >alloced_cpus,
> >
> cpumask_of_node(cpu_to_node(q_num)));
> > - for_each_cpu(tgt_cpu, &alloced_mask) {
> > + for_each_cpu_wrap(tgt_cpu, &alloced_mask,
> > + outgoing_channel->target_cpu + 1) {
Does it work when target_cpu is the last CPU on the system?
Otherwise, looking good.
> > if (tgt_cpu != outgoing_channel->target_cpu)
> {
> > outgoing_channel =
> > stor_device->stor_chns[tgt_cpu];
> > --
> > 1.8.3.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a channel for I/O requests
2018-01-31 20:22 ` Long Li
@ 2018-01-31 21:14 ` Michael Kelley (EOSG)
2018-01-31 21:22 ` Long Li
0 siblings, 1 reply; 6+ messages in thread
From: Michael Kelley (EOSG) @ 2018-01-31 21:14 UTC (permalink / raw)
To: Long Li, KY Srinivasan, Stephen Hemminger, martin.petersen,
devel, linux-kernel, linux-scsi, James E . J . Bottomley
> From: Long Li
> Sent: Wednesday, January 31, 2018 12:23 PM
> To: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>; KY Srinivasan
> <kys@microsoft.com>; Stephen Hemminger <sthemmin@microsoft.com>;
> martin.petersen@oracle.com; devel@linuxdriverproject.org; linux-kernel@vger.kernel.org;
> linux-scsi@vger.kernel.org; James E . J . Bottomley <jejb@linux.vnet.ibm.com>
> Subject: RE: [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a channel for I/O
> requests
>
> > Subject: RE: [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a
> > channel for I/O requests
> >
> > Updated/corrected two email addresses ...
> >
> > > -----Original Message-----
> > > From: Michael Kelley (EOSG)
> > > Sent: Wednesday, January 24, 2018 2:14 PM
> > > To: KY Srinivasan <kys@microsoft.com>; Stephen Hemminger
> > > <sthemmin@microsoft.com>; martin.petersen@oracle.com;
> > > longi@microsoft.com; JBottomley@odin.com;
> > > devel@linuxdriverproject.org; linux-kernel@vger.kernel.org;
> > > linux-scsi@vger.kernel.org
> > > Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
> > > Subject: [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a
> > > channel for I/O requests
> > >
> > > Update the algorithm in storvsc_do_io to look for a channel starting
> > > with the current CPU + 1 and wrap around (within the current NUMA
> > > node). This spreads VMbus interrupts more evenly across CPUs. Previous
> > > code always started with first CPU in the current NUMA node, skewing
> > > the interrupt load to that CPU.
> > >
> > > Signed-off-by: Michael Kelley <mikelley@microsoft.com>
> > > ---
> > > drivers/scsi/storvsc_drv.c | 3 ++-
> > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
> > > index e07907d..f3264c4 100644
> > > --- a/drivers/scsi/storvsc_drv.c
> > > +++ b/drivers/scsi/storvsc_drv.c
> > > @@ -1310,7 +1310,8 @@ static int storvsc_do_io(struct hv_device *device,
> > > */
> > > cpumask_and(&alloced_mask, &stor_device-
> > >alloced_cpus,
> > >
> > cpumask_of_node(cpu_to_node(q_num)));
> > > - for_each_cpu(tgt_cpu, &alloced_mask) {
> > > + for_each_cpu_wrap(tgt_cpu, &alloced_mask,
> > > + outgoing_channel->target_cpu + 1) {
>
> Does it work when target_cpu is the last CPU on the system?
>
> Otherwise, looking good.
Yes, it works. for_each_cpu_wrap() correctly wraps in the case where
the 3rd parameter ('start') is one past the end of the mask. Arguably,
we shouldn't rely on that, and should do the wrap to 0 before calling
for_each_cpu_wrap().
>
> > > if (tgt_cpu != outgoing_channel->target_cpu)
> > {
> > > outgoing_channel =
> > > stor_device->stor_chns[tgt_cpu];
> > > --
> > > 1.8.3.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a channel for I/O requests
2018-01-31 21:14 ` Michael Kelley (EOSG)
@ 2018-01-31 21:22 ` Long Li
0 siblings, 0 replies; 6+ messages in thread
From: Long Li @ 2018-01-31 21:22 UTC (permalink / raw)
To: Michael Kelley (EOSG),
KY Srinivasan, Stephen Hemminger, martin.petersen, devel,
linux-kernel, linux-scsi, James E . J . Bottomley
> Subject: RE: [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a
> channel for I/O requests
>
> > From: Long Li
> > Sent: Wednesday, January 31, 2018 12:23 PM
> > To: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>; KY
> > Srinivasan <kys@microsoft.com>; Stephen Hemminger
> > <sthemmin@microsoft.com>; martin.petersen@oracle.com;
> > devel@linuxdriverproject.org; linux-kernel@vger.kernel.org;
> > linux-scsi@vger.kernel.org; James E . J . Bottomley
> > <jejb@linux.vnet.ibm.com>
> > Subject: RE: [PATCH 1/1] scsi: storvsc: Spread interrupts when picking
> > a channel for I/O requests
> >
> > > Subject: RE: [PATCH 1/1] scsi: storvsc: Spread interrupts when
> > > picking a channel for I/O requests
> > >
> > > Updated/corrected two email addresses ...
> > >
> > > > -----Original Message-----
> > > > From: Michael Kelley (EOSG)
> > > > Sent: Wednesday, January 24, 2018 2:14 PM
> > > > To: KY Srinivasan <kys@microsoft.com>; Stephen Hemminger
> > > > <sthemmin@microsoft.com>; martin.petersen@oracle.com;
> > > > longi@microsoft.com; JBottomley@odin.com;
> > > > devel@linuxdriverproject.org; linux-kernel@vger.kernel.org;
> > > > linux-scsi@vger.kernel.org
> > > > Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
> > > > Subject: [PATCH 1/1] scsi: storvsc: Spread interrupts when picking
> > > > a channel for I/O requests
> > > >
> > > > Update the algorithm in storvsc_do_io to look for a channel
> > > > starting with the current CPU + 1 and wrap around (within the
> > > > current NUMA node). This spreads VMbus interrupts more evenly
> > > > across CPUs. Previous code always started with first CPU in the
> > > > current NUMA node, skewing the interrupt load to that CPU.
> > > >
> > > > Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
> > > > ---
> > > > drivers/scsi/storvsc_drv.c | 3 ++-
> > > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/scsi/storvsc_drv.c
> > > > b/drivers/scsi/storvsc_drv.c index e07907d..f3264c4 100644
> > > > --- a/drivers/scsi/storvsc_drv.c
> > > > +++ b/drivers/scsi/storvsc_drv.c
> > > > @@ -1310,7 +1310,8 @@ static int storvsc_do_io(struct hv_device
> *device,
> > > > */
> > > > cpumask_and(&alloced_mask, &stor_device-
> alloced_cpus,
> > > >
> > > cpumask_of_node(cpu_to_node(q_num)));
> > > > - for_each_cpu(tgt_cpu, &alloced_mask) {
> > > > + for_each_cpu_wrap(tgt_cpu, &alloced_mask,
> > > > + outgoing_channel->target_cpu + 1) {
> >
> > Does it work when target_cpu is the last CPU on the system?
> >
> > Otherwise, looking good.
>
> Yes, it works. for_each_cpu_wrap() correctly wraps in the case where the
> 3rd parameter ('start') is one past the end of the mask. Arguably, we
> shouldn't rely on that, and should do the wrap to 0 before calling
> for_each_cpu_wrap().
>
> >
> > > > if (tgt_cpu != outgoing_channel->target_cpu)
> > > {
> > > > outgoing_channel =
> > > > stor_device->stor_chns[tgt_cpu];
> > > > --
> > > > 1.8.3.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a channel for I/O requests
2018-01-24 22:14 [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a channel for I/O requests Michael Kelley (EOSG)
2018-01-24 22:37 ` Michael Kelley (EOSG)
@ 2018-02-07 0:39 ` Martin K. Petersen
1 sibling, 0 replies; 6+ messages in thread
From: Martin K. Petersen @ 2018-02-07 0:39 UTC (permalink / raw)
To: Michael Kelley (EOSG)
Cc: Stephen Hemminger, linux-scsi, martin.petersen, JBottomley,
linux-kernel, longi, devel
Michael,
> Update the algorithm in storvsc_do_io to look for a channel starting
> with the current CPU + 1 and wrap around (within the current NUMA
> node). This spreads VMbus interrupts more evenly across CPUs. Previous
> code always started with first CPU in the current NUMA node, skewing
> the interrupt load to that CPU.
Applied to 4.16/scsi-fixes. Thanks!
--
Martin K. Petersen Oracle Linux Engineering
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-02-07 0:39 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-24 22:14 [PATCH 1/1] scsi: storvsc: Spread interrupts when picking a channel for I/O requests Michael Kelley (EOSG)
2018-01-24 22:37 ` Michael Kelley (EOSG)
2018-01-31 20:22 ` Long Li
2018-01-31 21:14 ` Michael Kelley (EOSG)
2018-01-31 21:22 ` Long Li
2018-02-07 0:39 ` Martin K. Petersen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).