linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andre Hedrick <andre@linux-ide.org>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: Jens Axboe <axboe@suse.de>, Dave Jones <davej@codemonkey.org.uk>,
	"Mudama, Eric" <eric_mudama@maxtor.com>,
	Oleg Drokin <green@namesys.com>,
	Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>,
	Alan Cox <alan@lxorguk.ukuu.org.uk>,
	Oliver Neukum <oliver@neukum.org>,
	lkhelp@rekl.yi.org, linux-kernel@vger.kernel.org
Subject: Re: 2.5.69, IDE TCQ can't be enabled
Date: Tue, 13 May 2003 13:29:10 -0700 (PDT)	[thread overview]
Message-ID: <Pine.LNX.4.10.10305131324070.2718-200000@master.linux-ide.org> (raw)
In-Reply-To: <20030513184205.GC11073@gtf.org>

[-- Attachment #1: Type: text/plain, Size: 1001 bytes --]



This is the last time I got TAG running clean!
Proof you have zero gain on writes and huge gains on reads.

Still it is a lame protocol.

On Tue, 13 May 2003, Jeff Garzik wrote:

> On Tue, May 13, 2003 at 08:13:37PM +0200, Jens Axboe wrote:
> > btw, you may want to see the IDE_TCQ_FIDDLE_SI define in ide-tcq, here's
> > the comment I put there:
> > 
> > /*
> >  * we are leaving the SERVICE interrupt alone, IBM drives have it
> >  * on per default and it can't be turned off. Doesn't matter, this
> >  * is the sane config.
> >  */
> > #undef IDE_TCQ_FIDDLE_SI
> > 
> > Are you sure this isn't what you are seeing?
> 
> 
> My information comes solely from IDENTIFY DEVICE...
> 
> 	Jeff
> 
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 

Andre Hedrick
LAD Storage Consulting Group

[-- Attachment #2: Type: text/plain, Size: 5822 bytes --]

Linux version 2.3.99-pre9-tag (root@xathy.linux-ide.org) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Fri Apr 26 18:35:40 PDT 2002
BIOS-provided physical RAM map:
 e820: 000000000009fc00 @ 0000000000000000 (usable)
 e820: 0000000000000400 @ 000000000009fc00 (reserved)
 e820: 0000000000010000 @ 00000000000f0000 (reserved)
 e820: 0000000000001000 @ 00000000fec00000 (reserved)
 e820: 0000000000001000 @ 00000000fee00000 (reserved)
 e820: 0000000000010000 @ 00000000ffff0000 (reserved)
 e820: 000000003fef0000 @ 0000000000100000 (usable)
 e820: 000000000000d000 @ 000000003fff3000 (ACPI data)
 e820: 0000000000003000 @ 000000003fff0000 (ACPI NVS)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
On node 0 totalpages: 229376
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 0 pages.
Initializing CPU#0
Detected 997472345 Hz processor.
ide_setup: idebus=33
Console: colour VGA+ 80x25
Calibrating delay loop... 1985.74 BogoMIPS
Memory: 898668k/917504k available (1469k kernel code, 18448k reserved, 99k data, 196k init, 0k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
kmem_create: Poisoning requested, but con given - bdev_cache
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
kmem_create: Poisoning requested, but con given - inode_cache
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 64K  L1 D Cache: 64K
CPU: L2 Cache: 256K
CPU: AMD AMD Athlon(tm) Processor stepping 01
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
AMD K6 stepping B detected - <6>K6 BUG 20033685 20000000 (Report these if test report is incorrect)
AMD K6 stepping B detected - system stability may be impaired when more than 32 MB are used.
Please see http://www.mygale.com/~poulot/k6bug.html
POSIX conformance testing by UNIFIX
mtrr: v1.36 (20000221) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1022/7443] at 00:07.0
isapnp: Scanning for Pnp cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
kmem_create: Poisoning requested, but con given - skbuff_head_cache
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 65536 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: AppleTalk 0.18 for Linux NET4.0
Initializing RT netlink socket
Starting kswapd v1.6
pty: 256 Unix98 ptys configured
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes
AMD7441: IDE controller on PCI bus 00 dev 39
AMD7441: chipset revision 3
AMD7441: not 100% native mode: will probe irqs later
AMD7441: disabling single-word DMA support (revision < C4)
    ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DTLA-307075, ATA DISK drive
hdc: LTN242, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63, UDMA(100)
hda: Queued DMA enabled
Release interrupt enabled

hdc: ATAPI 24X CD-ROM drive, 120kB Cache, DMA
Uniform CD-ROM driver Revision: 3.08
Partition check:
 /dev/ide/host0/bus0/target0/lun0:GEOqtag=0
REZqtag=0
MULqtag=0
 p1 p2 p3 < p5 p6 p7 p8 p9 p10 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
LVM version 0.8final  by Heinz Mauelshagen  (15/02/2000)
lvm -- Driver successfully initialized
 id: 0xff  io: 0x300 <7> id: 0xff  io: 0x210 <7> id: 0xff  io: 0x240 <7> id: 0xff  io: 0x280 <7> id: 0xff  io: 0x2c0 <7> id: 0xff  io: 0x200 <7> id: 0xff  io: 0x320 <7> id: 0xff  io: 0x340 <7> id: 0xff  io: 0x360 <5>RAMDISK: Compressed image found at block 0
Freeing initrd memory: 261k freed
Serial driver version 4.93 (2000-03-20) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10c
Non-volatile memory driver v1.0
Linux Tulip driver version 0.9.4.3 (Apr 14, 2000)
eth0: Lite-On 82c168 PNIC rev 33 at 0xa000, 00:A0:CC:3F:CA:F8, IRQ 10.
eth0:  MII transceiver #1 config 1000 status 782d advertising 01e1.
ip_conntrack (7168 buckets, 57344 max)
ip_tables: (c)2000 Netfilter core team
devfs: v0.96 (20000430) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x2
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 196k freed
NET4: Linux IPX 0.38 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.


File './Bonnie.1223', size: 1073741824, volumes: 1
Writing with putc()...  done:  10958 kB/s  81.0 %CPU
Rewriting...            done:   8927 kB/s  11.0 %CPU
Writing intelligently...done:  19755 kB/s  12.4 %CPU
Reading with getc()...  done:  10588 kB/s  82.5 %CPU
Reading intelligently...done:  66170 kB/s  38.1 %CPU
Seeker 1...Seeker 2...Seeker 3...start 'em...done...done...done...
              ---Sequential Output (nosync)--- ---Sequential Input-- --Rnd Seek-
              -Per Char- --Block--- -Rewrite-- -Per Char- --Block--- --04k (03)-
Machine    MB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU   /sec %CPU
       1*1024 10958 81.0 19755 12.4  8927 11.0 10588 82.5 66170 38.1  345.7  0.0



  reply	other threads:[~2003-05-13 20:24 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-05-12 19:19 2.5.69, IDE TCQ can't be enabled Mudama, Eric
2003-05-12 19:35 ` Jeff Garzik
2003-05-12 19:42   ` Jens Axboe
2003-05-12 19:44     ` Jens Axboe
2003-05-12 19:53     ` Jeff Garzik
2003-05-13  6:40       ` Jens Axboe
2003-05-13 18:00         ` Dave Jones
2003-05-13 18:03           ` Jens Axboe
2003-05-13 18:05             ` Jeff Garzik
2003-05-13 18:06               ` Jens Axboe
2003-05-13 18:13                 ` Jens Axboe
2003-05-13 18:42                   ` Jeff Garzik
2003-05-13 20:29                     ` Andre Hedrick [this message]
2003-05-14  7:04                       ` Jens Axboe
2003-05-14  7:15                     ` Jens Axboe
2003-05-13 20:03                   ` Andre Hedrick
2003-05-13 22:55                     ` Alan Cox
2003-05-13 18:03           ` Jeff Garzik
2003-05-14 13:30           ` Henning P. Schmiedehausen
2003-05-12 22:36     ` Christer Weinigel
2003-05-13  6:41       ` Jens Axboe
2003-05-13 20:04 ` Bill Davidsen
  -- strict thread matches above, loose matches on Subject: below --
2003-05-13 20:43 Mudama, Eric
2003-05-13 20:31 Mudama, Eric
2003-05-13 20:34 ` Andre Hedrick
2003-05-13 20:28 Mudama, Eric
2003-05-12 17:58 Mudama, Eric
2003-05-12 18:59 ` Jens Axboe
2003-05-12 19:42 ` Jeff Garzik
2003-05-10  1:38 lkhelp
2003-05-12 12:46 ` Oleg Drokin
2003-05-12 12:55   ` Oliver Neukum
2003-05-12 13:16     ` Bartlomiej Zolnierkiewicz
2003-05-12 13:12       ` Alan Cox
2003-05-13 15:39         ` Jens Axboe
2003-05-12 13:22       ` Oleg Drokin
2003-05-12 13:23         ` Jens Axboe
2003-05-12 13:35           ` Jeff Garzik
2003-05-12 13:30         ` Bartlomiej Zolnierkiewicz
2003-05-12 13:22       ` Jens Axboe
2003-05-13 15:32       ` Jens Axboe
2003-05-13 17:25         ` Oliver Neukum
2003-05-13 17:28           ` Jens Axboe
2003-05-13 18:46             ` Oliver Neukum
2003-05-13 19:06               ` Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Pine.LNX.4.10.10305131324070.2718-200000@master.linux-ide.org \
    --to=andre@linux-ide.org \
    --cc=B.Zolnierkiewicz@elka.pw.edu.pl \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=axboe@suse.de \
    --cc=davej@codemonkey.org.uk \
    --cc=eric_mudama@maxtor.com \
    --cc=green@namesys.com \
    --cc=jgarzik@pobox.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lkhelp@rekl.yi.org \
    --cc=oliver@neukum.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).