* possible partition corruption
@ 2003-02-06 20:20 Thomas Molina
2003-02-06 20:36 ` Andrew Morton
0 siblings, 1 reply; 14+ messages in thread
From: Thomas Molina @ 2003-02-06 20:20 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: TEXT/PLAIN, Size: 3656 bytes --]
I have run into an apparent anomaly while compiling/testing 2.5.59-bk. My
normal mode of operation is to do a daily bk pull to get the latest csets
and do a compile/boot run. After yesterday's I started seeing problems on
reboot. During the reboot I would get the OK booting the kernel followed
by a system freeze. After a forced reboot into a stock RedHat 8.0 2.4
kernel I would see the system misidentify my boot partiton as an ext2
partition and the following messages would appear:
EXT2-fs: ide0(3,8): couldn't mount because of unsupported optional feature
(4).
Kernel panic: VFS: Unable to mount root fs on 08:08
Following this I rebooted using my rescue CD and did an fsck on the
partition. It reported recovering the journal, but found no other
apparent corruption. Upon rebooting, the fsck noted an unclean shutdown,
but found the partition clean after checking it. No other anomalies were
noted.
However, the same thing happened this morning, so I did some investigating
and found that now, whenever I compile and boot from any 2.5.59 kernel I
get the above-described behaviour. I've even tried downloading a stock
tarball and using a default configuration. I've made the configuration
almost as simple as I could and still get the above behaviour.
At this point, I'm looking at my description and seeing there is very
little data I can provide that might be useful. My stuff is backed up,
and I can reformat and try again if necessary. I'm including some data
which seems relevant. The configuration file I used is attached. Nothing
interesting gets logged to /var/log/messages.
If someone wants to look into this, I'll keep things as they are.
Otherwise, I'll wipe and restart.
[root@dad scripts]# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) Processor
stepping : 2
cpu MHz : 1343.085
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 2680.42
[root@dad scripts]# /sbin/lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev
03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master
IDE (rev 06)
00:04.2 USB Controller: VIA Technologies, Inc. USB (rev 16)
00:04.3 USB Controller: VIA Technologies, Inc. USB (rev 16)
00:04.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
40)
00:0a.0 Multimedia audio controller: Yamaha Corporation YMF-754 [DS-1E
Audio Controller]
00:0d.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev
08)
00:11.0 Unknown mass storage controller: Promise Technology, Inc. 20265
(rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP
1X/2X (rev 5c)
hda: WDC WD300BB-00AUA1, ATA DISK drive
hdb: MDT MD100EB-00BHF0, ATA DISK drive
hdc: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=3649/255/63,
UDMA(100)
hdb: 19541088 sectors (10005 MB) w/2048KiB Cache, CHS=1216/255/63,
UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
hdb: hdb1 hdb2
[-- Attachment #2: Type: TEXT/PLAIN, Size: 11505 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_SWAP=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_SCx200 is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_RZ1000=y
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
# CONFIG_NET is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# ISDN subsystem
#
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_AMD_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP3 is not set
CONFIG_AGP_INTEL=y
CONFIG_AGP_VIA=y
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_AMD_8151 is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_KALLSYMS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_X86_BIOS_REBOOT=y
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: possible partition corruption
2003-02-06 20:20 possible partition corruption Thomas Molina
@ 2003-02-06 20:36 ` Andrew Morton
2003-02-06 21:05 ` Thomas Molina
0 siblings, 1 reply; 14+ messages in thread
From: Andrew Morton @ 2003-02-06 20:36 UTC (permalink / raw)
To: Thomas Molina; +Cc: linux-kernel
Thomas Molina <tmolina@cox.net> wrote:
>
> I have run into an apparent anomaly while compiling/testing 2.5.59-bk. My
> normal mode of operation is to do a daily bk pull to get the latest csets
> and do a compile/boot run. After yesterday's I started seeing problems on
> reboot. During the reboot I would get the OK booting the kernel followed
> by a system freeze. After a forced reboot into a stock RedHat 8.0 2.4
> kernel I would see the system misidentify my boot partiton as an ext2
> partition and the following messages would appear:
>
Everything you describe is consistent with a kernel which does not have ext3
compiled into it.
> EXT2-fs: ide0(3,8): couldn't mount because of unsupported optional feature
> (4).
> Kernel panic: VFS: Unable to mount root fs on 08:08
>
That is an ext3 filesystem in the "needs journal recovery" state. ext2
cannot mount that until either fsck or the ext3 kernel driver has run
recovery.
grep EXT3 .config ??
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: possible partition corruption
2003-02-06 20:36 ` Andrew Morton
@ 2003-02-06 21:05 ` Thomas Molina
2003-02-06 21:14 ` Andreas Dilger
2003-02-06 21:23 ` Andrew Morton
0 siblings, 2 replies; 14+ messages in thread
From: Thomas Molina @ 2003-02-06 21:05 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Thu, 6 Feb 2003, Andrew Morton wrote:
> Thomas Molina <tmolina@cox.net> wrote:
> >
> > I have run into an apparent anomaly while compiling/testing 2.5.59-bk. My
> > normal mode of operation is to do a daily bk pull to get the latest csets
> > and do a compile/boot run. After yesterday's I started seeing problems on
> > reboot. During the reboot I would get the OK booting the kernel followed
> > by a system freeze. After a forced reboot into a stock RedHat 8.0 2.4
> > kernel I would see the system misidentify my boot partiton as an ext2
> > partition and the following messages would appear:
> >
>
> Everything you describe is consistent with a kernel which does not have ext3
> compiled into it.
>
> > EXT2-fs: ide0(3,8): couldn't mount because of unsupported optional feature
> > (4).
> > Kernel panic: VFS: Unable to mount root fs on 08:08
> >
>
> That is an ext3 filesystem in the "needs journal recovery" state. ext2
> cannot mount that until either fsck or the ext3 kernel driver has run
> recovery.
>
> grep EXT3 .config ??
>
I'm aware of that. I attached the config file showing ext3 was compiled
in. I went through several iterations to ensure that having the proper
filesystem compiled in was done.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: possible partition corruption
2003-02-06 21:05 ` Thomas Molina
@ 2003-02-06 21:14 ` Andreas Dilger
2003-02-06 22:35 ` Thomas Molina
2003-02-06 21:23 ` Andrew Morton
1 sibling, 1 reply; 14+ messages in thread
From: Andreas Dilger @ 2003-02-06 21:14 UTC (permalink / raw)
To: Thomas Molina; +Cc: Andrew Morton, linux-kernel
On Feb 06, 2003 15:05 -0600, Thomas Molina wrote:
> On Thu, 6 Feb 2003, Andrew Morton wrote:
> > Everything you describe is consistent with a kernel which does not have ext3
> > compiled into it.
> >
> > That is an ext3 filesystem in the "needs journal recovery" state. ext2
> > cannot mount that until either fsck or the ext3 kernel driver has run
> > recovery.
>
> I'm aware of that. I attached the config file showing ext3 was compiled
> in. I went through several iterations to ensure that having the proper
> filesystem compiled in was done.
Maybe some config/linking breakage puts ext2 in front of ext3 in the probe
order? Try compiling with ext2 as a module.
Cheers, Andreas
--
Andreas Dilger
http://sourceforge.net/projects/ext2resize/
http://www-mddsp.enel.ucalgary.ca/People/adilger/
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: possible partition corruption
2003-02-06 21:14 ` Andreas Dilger
@ 2003-02-06 22:35 ` Thomas Molina
0 siblings, 0 replies; 14+ messages in thread
From: Thomas Molina @ 2003-02-06 22:35 UTC (permalink / raw)
To: Andreas Dilger; +Cc: Andrew Morton, linux-kernel
On Thu, 6 Feb 2003, Andreas Dilger wrote:
> On Feb 06, 2003 15:05 -0600, Thomas Molina wrote:
> > On Thu, 6 Feb 2003, Andrew Morton wrote:
> > > Everything you describe is consistent with a kernel which does not have ext3
> > > compiled into it.
> > >
> > > That is an ext3 filesystem in the "needs journal recovery" state. ext2
> > > cannot mount that until either fsck or the ext3 kernel driver has run
> > > recovery.
> >
> > I'm aware of that. I attached the config file showing ext3 was compiled
> > in. I went through several iterations to ensure that having the proper
> > filesystem compiled in was done.
>
> Maybe some config/linking breakage puts ext2 in front of ext3 in the probe
> order? Try compiling with ext2 as a module.
Nope. I still got the same symptoms.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: possible partition corruption
2003-02-06 21:05 ` Thomas Molina
2003-02-06 21:14 ` Andreas Dilger
@ 2003-02-06 21:23 ` Andrew Morton
2003-02-06 21:33 ` Thomas Molina
1 sibling, 1 reply; 14+ messages in thread
From: Andrew Morton @ 2003-02-06 21:23 UTC (permalink / raw)
To: Thomas Molina; +Cc: linux-kernel
Thomas Molina <tmolina@cox.net> wrote:
>
> > Everything you describe is consistent with a kernel which does not have ext3
> > compiled into it.
> ...
> I'm aware of that.
In that case you may be experiencing the mysterious vanishing
ext3_read_super-doesn't-work bug. Usually a recompile/relink makes it go
away. I haven't seen it in months.
Could you please drop this additional debugging in there and see
what happens?
fs/ext3/super.c | 34 ++++++++++++++++++++++------------
1 files changed, 22 insertions(+), 12 deletions(-)
diff -puN fs/ext3/super.c~efs fs/ext3/super.c
--- 25/fs/ext3/super.c~efs Thu Feb 6 13:17:55 2003
+++ 25-akpm/fs/ext3/super.c Thu Feb 6 13:21:16 2003
@@ -1017,12 +1017,16 @@ static int ext3_fill_super (struct super
int i;
int needs_recovery;
+ printk("%s: enter\n", __FUNCTION__);
+
#ifdef CONFIG_JBD_DEBUG
ext3_ro_after = 0;
#endif
sbi = kmalloc(sizeof(*sbi), GFP_KERNEL);
- if (!sbi)
+ if (!sbi) {
+ printk("no sbi\n");
return -ENOMEM;
+ }
sb->s_fs_info = sbi;
memset(sbi, 0, sizeof(*sbi));
sbi->s_mount_opt = 0;
@@ -1057,10 +1061,10 @@ static int ext3_fill_super (struct super
sbi->s_es = es;
sb->s_magic = le16_to_cpu(es->s_magic);
if (sb->s_magic != EXT3_SUPER_MAGIC) {
- if (!silent)
- printk(KERN_ERR
- "VFS: Can't find ext3 filesystem on dev %s.\n",
- sb->s_id);
+ printk(KERN_ERR
+ "VFS: Can't find ext3 filesystem on dev %s.\n",
+ sb->s_id);
+ printk("magic=0x%x\n", sb->s_magic);
goto failed_mount;
}
@@ -1091,8 +1095,10 @@ static int ext3_fill_super (struct super
sbi->s_resuid = le16_to_cpu(es->s_def_resuid);
sbi->s_resgid = le16_to_cpu(es->s_def_resgid);
- if (!parse_options ((char *) data, sbi, &journal_inum, 0))
+ if (!parse_options ((char *) data, sbi, &journal_inum, 0)) {
+ printk("option parsing failed\n");
goto failed_mount;
+ }
sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
((sbi->s_mount_opt & EXT3_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
@@ -1276,16 +1282,19 @@ static int ext3_fill_super (struct super
*/
if (!test_opt(sb, NOLOAD) &&
EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL)) {
- if (ext3_load_journal(sb, es))
+ if (ext3_load_journal(sb, es)) {
+ printk("journal loading failed\n");
goto failed_mount2;
+ }
} else if (journal_inum) {
- if (ext3_create_journal(sb, es, journal_inum))
+ if (ext3_create_journal(sb, es, journal_inum)) {
+ printk("journal creation failed\n");
goto failed_mount2;
+ }
} else {
- if (!silent)
- printk (KERN_ERR
- "ext3: No journal on filesystem on %s\n",
- sb->s_id);
+ printk (KERN_ERR
+ "ext3: No journal on filesystem on %s\n",
+ sb->s_id);
goto failed_mount2;
}
@@ -1371,6 +1380,7 @@ failed_mount:
out_fail:
sb->s_fs_info = NULL;
kfree(sbi);
+ printk("%s: failing\n", __FUNCTION__);
return -EINVAL;
}
_
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: possible partition corruption
2003-02-06 21:23 ` Andrew Morton
@ 2003-02-06 21:33 ` Thomas Molina
2003-02-06 21:40 ` Andrew Morton
0 siblings, 1 reply; 14+ messages in thread
From: Thomas Molina @ 2003-02-06 21:33 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Thu, 6 Feb 2003, Andrew Morton wrote:
> Thomas Molina <tmolina@cox.net> wrote:
> >
> > > Everything you describe is consistent with a kernel which does not have ext3
> > > compiled into it.
> > ...
> > I'm aware of that.
>
> In that case you may be experiencing the mysterious vanishing
> ext3_read_super-doesn't-work bug. Usually a recompile/relink makes it go
> away. I haven't seen it in months.
>
> Could you please drop this additional debugging in there and see
> what happens?
I'll try it, but a question did occur to me. I got the hang while booting
a freshly-compiled 2.5.59, but the error message was received after
supposedly cleaning and recovering the journal. That was using the stock
RedHat 8.0 kernel, 2.4.18-24.8.0, which most certainly does have ext3
support. Would the bug you described affect a following boot into a
totally different kernel?
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: possible partition corruption
2003-02-06 21:33 ` Thomas Molina
@ 2003-02-06 21:40 ` Andrew Morton
0 siblings, 0 replies; 14+ messages in thread
From: Andrew Morton @ 2003-02-06 21:40 UTC (permalink / raw)
To: Thomas Molina; +Cc: linux-kernel
Thomas Molina <tmolina@cox.net> wrote:
>
> On Thu, 6 Feb 2003, Andrew Morton wrote:
>
> > Thomas Molina <tmolina@cox.net> wrote:
> > >
> > > > Everything you describe is consistent with a kernel which does not have ext3
> > > > compiled into it.
> > > ...
> > > I'm aware of that.
> >
> > In that case you may be experiencing the mysterious vanishing
> > ext3_read_super-doesn't-work bug. Usually a recompile/relink makes it go
> > away. I haven't seen it in months.
> >
> > Could you please drop this additional debugging in there and see
> > what happens?
>
> I'll try it, but a question did occur to me. I got the hang while booting
> a freshly-compiled 2.5.59, but the error message was received after
> supposedly cleaning and recovering the journal. That was using the stock
> RedHat 8.0 kernel, 2.4.18-24.8.0, which most certainly does have ext3
> support. Would the bug you described affect a following boot into a
> totally different kernel?
The error message you saw was ext2 saying "I don't know how to deal with
uncleanly shut-down ext3 filesystems".
The kernel will try to mount the fs as ext3 first, and then as ext2.
For some reason the ext3 attempt is not successful, so it falls through to
ext2 and that is the first message we see.
^ permalink raw reply [flat|nested] 14+ messages in thread
[parent not found: <Pine.LNX.4.44.0302061848360.851-200000@localhost.localdomain>]
* Re: possible partition corruption
[not found] <Pine.LNX.4.44.0302061848360.851-200000@localhost.localdomain>
@ 2003-02-07 19:59 ` Thomas Molina
2003-02-07 22:15 ` Andrew Morton
2003-02-07 23:40 ` Andrew Morton
0 siblings, 2 replies; 14+ messages in thread
From: Thomas Molina @ 2003-02-07 19:59 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: TEXT/PLAIN, Size: 5733 bytes --]
> On Thu, 6 Feb 2003, Andrew Morton wrote:
>
> > > I'm still not seeing your messages.
> > >
> > > Part of the problem is I'm only seeing part of the boot sequence. The
> > > last thing I see is the infamous:
> > >
> > > Uncompressing Linux... OK booting the kernel
> > >
> > > Something is going on behind the scenes, though. The drive light seems to
> > > be doing its usual thing. The system responds to alt-sysrq keys, but not
> > > to ctrl-alt-del.
> >
> > eh? But that sounds like something totally different from
> > your original report?
> >
> > You're not getting any console output at all?
> >
> > Make sure that you're not booting with the `quiet' option.
> >
> > If you're using any fancy video options, framebuffers, etc then disabled them.
Further on this problem. I did a system restore to a disk on /dev/hdb,
fixed up fstab and other files so I could boot from /dev/hdb1. I got
results similar to the original. However, this time I did get log
messages.
I'm also attaching a copy of the configuration used to build this kernel.
What might be a good next step in debugging this?
When I booted up I got the following on the console:
Booting 'tom's test'
root (hd1,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.5.59-0207 ro root=/dev/hdb1
[Linux-bzImage, setup=0x1400, size= 0xec89c]
Uncompressing Linux... OK booting the kernel
at which time I ceased seeing messages on the console. However, I
continued to see drive light activity. When that ceased, I booted back
into a stock RedHat 8.0 kernel and did an fsck on the affected drive. I
got the following:
[root@dad root]# e2fsck -d -f -v /dev/hdb1
e2fsck 1.27 (8-Mar-2002)
/dev/hdb1: recovering journal
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
106211 inodes used (9%)
83 non-contiguous inodes (0.1%)
# of inodes with ind/dind/tind blocks: 4994/29/0
777861 blocks used (33%)
0 bad blocks
0 large files
80812 regular files
4661 directories
2523 character device files
15884 block device files
1 fifo
2265 links
2318 symbolic links (2315 fast symbolic links)
3 sockets
--------
108467 files
In /var/log/messages I got the following interesting stuff:
Feb 7 13:20:36 dad kernel: Journalled Block Device driver loaded
(how can that be, considering the initial message on the console?)
then I started seeing some of these:
Feb 7 13:20:36 dad keytable: /etc/rc3.d/S17keytable: line 26: /dev/tty0:
No such device
Feb 7 13:20:36 dad keytable: Couldnt get a file descriptor referring to
the console
Feb 7 13:20:36 dad kernel: Warning: unable to open an initial console.
Feb 7 13:20:43 dad gpm[724]: oops() invoked from gpn.c(125)
Feb 7 13:20:43 dad gpm[724]: /dev/console: No such device
Feb 7 13:20:43 dad gpm: gpm: oops() invoked from gpn.c(125)
Feb 7 13:20:43 dad gpm: /dev/console: No such device
Feb 7 13:20:43 dad gpm: gpm startup failed
Feb 7 13:20:43 dad crond: crond startup succeeded
Feb 7 13:20:44 dad xfs: listening on port 7100
Feb 7 13:20:44 dad xfs: xfs startup succeeded
Feb 7 13:20:44 dad anacron: anacron startup succeeded
Feb 7 13:20:44 dad atd: atd startup succeeded
Feb 7 13:20:44 dad xfs: ignoring font path element
/usr/X11R6/lib/X11/fonts/cyrillic (unreadable)
Feb 7 13:20:44 dad kernel: warning: process `update' used the obsolete
bdflush system call
Feb 7 13:20:44 dad kernel: Fix your initscripts?
Feb 7 13:20:44 dad /sbin/mingetty[799]: /dev/tty5: cannot open tty: No
such device
Feb 7 13:20:44 dad /sbin/mingetty[795]: /dev/tty1: cannot open tty: No
such device
Feb 7 13:20:44 dad /sbin/mingetty[796]: /dev/tty2: cannot open tty: No
such device
Feb 7 13:20:44 dad /sbin/mingetty[797]: /dev/tty3: cannot open tty: No
such device
Feb 7 13:20:44 dad /sbin/mingetty[800]: /dev/tty6: cannot open tty: No
such device
Feb 7 13:20:44 dad /sbin/mingetty[798]: /dev/tty4: cannot open tty: No
such device
Feb 7 13:20:44 dad /sbin/mingetty[809]: /dev/tty1: cannot open tty: No
such device
Feb 7 13:20:44 dad /sbin/mingetty[810]: /dev/tty2: cannot open tty: No
such device
Feb 7 13:20:44 dad /sbin/mingetty[811]: /dev/tty3: cannot open tty: No
such device
Feb 7 13:20:44 dad /sbin/mingetty[812]: /dev/tty4: cannot open tty: No
such device
Feb 7 13:20:44 dad /sbin/mingetty[813]: /dev/tty5: cannot open tty: No
such device
Feb 7 13:20:44 dad /sbin/mingetty[814]: /dev/tty6: cannot open tty: No
such device
etc., etc., etc.
followed finally by:
Feb 7 13:20:45 dad init: Id "1" respawning too fast: disabled for 5
minutes
Feb 7 13:20:45 dad /sbin/mingetty[907]: /dev/tty6: cannot open tty: No
such device
Feb 7 13:20:45 dad /sbin/mingetty[906]: /dev/tty4: cannot open tty: No
such device
Feb 7 13:20:45 dad init: Id "5" respawning too fast: disabled for 5
minutes
Feb 7 13:20:45 dad init: Id "4" respawning too fast: disabled for 5
minutes
Feb 7 13:20:45 dad /sbin/mingetty[911]: /dev/tty3: cannot open tty: No
such device
Feb 7 13:20:45 dad /sbin/mingetty[913]: /dev/tty6: cannot open tty: No
such device
Feb 7 13:20:45 dad /sbin/mingetty[905]: /dev/tty2: cannot open tty: No
such device
Feb 7 13:20:45 dad init: Id "6" respawning too fast: disabled for 5
minutes
Feb 7 13:20:45 dad init: Id "2" respawning too fast: disabled for 5
minutes
Feb 7 13:20:45 dad /sbin/mingetty[915]: /dev/tty3: cannot open tty: No
such device
Feb 7 13:20:45 dad init: Id "3" respawning too fast: disabled for 5
minutes
Feb 7 13:20:45 dad init: no more processes left in this runlevel
You get the idea.
[-- Attachment #2: Type: TEXT/PLAIN, Size: 21800 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_SWAP=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=17
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI Support
#
# CONFIG_ACPI is not set
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_SCx200 is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_XFRM_USER is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m
# CONFIG_IPV6 is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=m
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=512
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_PHILIPSPAR=m
CONFIG_I2C_ELV=m
CONFIG_I2C_VELLEMAN=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ELEKTOR=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_PROC=m
#
# I2C Hardware Sensors Mainboard support
#
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
#
# I2C Hardware Sensors Chip support
#
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_LM75=m
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_INTEL_RNG=m
CONFIG_AMD_RNG=m
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_FTAPE=m
CONFIG_ZFTAPE=m
CONFIG_ZFT_DFLT_BLK_SZ=10240
#
# The compressor will be built as a module only!
#
CONFIG_ZFT_COMPRESSOR=m
CONFIG_FT_NR_BUFFERS=3
# CONFIG_FT_PROC_FS is not set
CONFIG_FT_NORMAL_DEBUG=y
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
# CONFIG_FT_NO_TRACE_AT_ALL is not set
#
# Hardware configuration
#
CONFIG_FT_STD_FDC=y
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not set
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000
CONFIG_FT_ALPHA_CLOCK=0
CONFIG_AGP=m
CONFIG_AGP3=y
CONFIG_AGP_INTEL=m
CONFIG_AGP_VIA=m
# CONFIG_AGP_VIA_KT400 is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_AMD_8151 is not set
# CONFIG_AGP_I7505 is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_JFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_EXT2_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_XFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=m
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_GSS is not set
CONFIG_LOCKD=m
CONFIG_EXPORTFS=m
CONFIG_CIFS=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_NCP_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_ZISOFS_FS=m
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_RTCTIMER=m
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_MEMORY=y
CONFIG_SND_DEBUG_DETECT=y
#
# Generic devices
#
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_YMFPCI=m
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# SCSI support is needed for USB Storage
#
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_IOVIRT=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_KALLSYMS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_X86_BIOS_REBOOT=y
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: possible partition corruption
2003-02-07 19:59 ` Thomas Molina
@ 2003-02-07 22:15 ` Andrew Morton
2003-02-07 23:54 ` Thomas Molina
2003-02-07 23:40 ` Andrew Morton
1 sibling, 1 reply; 14+ messages in thread
From: Andrew Morton @ 2003-02-07 22:15 UTC (permalink / raw)
To: Thomas Molina; +Cc: linux-kernel
gack, your whole tty layer didn't come up, or the device nodes aren't there.
Are you using devfs?
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: possible partition corruption
2003-02-07 19:59 ` Thomas Molina
2003-02-07 22:15 ` Andrew Morton
@ 2003-02-07 23:40 ` Andrew Morton
2003-02-08 1:48 ` Thomas Molina
1 sibling, 1 reply; 14+ messages in thread
From: Andrew Morton @ 2003-02-07 23:40 UTC (permalink / raw)
To: Thomas Molina; +Cc: linux-kernel
Thomas Molina <tmolina@cox.net> wrote:
>
> Further on this problem. I did a system restore to a disk on /dev/hdb,
> fixed up fstab and other files so I could boot from /dev/hdb1. I got
> results similar to the original. However, this time I did get log
> messages.
OK, I tried your .config and the same happened here - no console output and
huge amounts of disk I/O as the system was booting. No filesystem problems
on reboot, however.
I couldn't immediately see the reason for this. You have your whole input
layer configured as a module, perhaps that has upset things.
I suggest that you work on the config settings and find out what it is that
is causing the tty layer to not come up.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: possible partition corruption
2003-02-07 23:40 ` Andrew Morton
@ 2003-02-08 1:48 ` Thomas Molina
2003-02-08 2:06 ` Andrew Morton
0 siblings, 1 reply; 14+ messages in thread
From: Thomas Molina @ 2003-02-08 1:48 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Fri, 7 Feb 2003, Andrew Morton wrote:
> I couldn't immediately see the reason for this. You have your whole input
> layer configured as a module, perhaps that has upset things.
>
> I suggest that you work on the config settings and find out what it is that
> is causing the tty layer to not come up.
OK, Hold the phone Susan, and stamp IDIOT on my forehead. The erason for
not getting any output on the console was that I had configured the kernel
without support for virtual terminals or console on virtual terminals.
Once I configured that correctly, things worked. Duh!
The thing I don't understand is why would not having that configured in
give me the lost journal and an inability to boot and mount the root
partition when I booted back into a "normal" kernel.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: possible partition corruption
2003-02-08 1:48 ` Thomas Molina
@ 2003-02-08 2:06 ` Andrew Morton
0 siblings, 0 replies; 14+ messages in thread
From: Andrew Morton @ 2003-02-08 2:06 UTC (permalink / raw)
To: Thomas Molina; +Cc: linux-kernel
Thomas Molina <tmolina@cox.net> wrote:
>
> On Fri, 7 Feb 2003, Andrew Morton wrote:
>
> > I couldn't immediately see the reason for this. You have your whole input
> > layer configured as a module, perhaps that has upset things.
> >
> > I suggest that you work on the config settings and find out what it is that
> > is causing the tty layer to not come up.
>
> OK, Hold the phone Susan, and stamp IDIOT on my forehead. The erason for
> not getting any output on the console was that I had configured the kernel
> without support for virtual terminals or console on virtual terminals.
> Once I configured that correctly, things worked. Duh!
Yes, but you had CONFIG_VGA_CONSOLE=y.
> The thing I don't understand is why would not having that configured in
> give me the lost journal and an inability to boot and mount the root
> partition when I booted back into a "normal" kernel.
Don't know. It didn't do that when I tested it.
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2003-02-08 1:57 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-02-06 20:20 possible partition corruption Thomas Molina
2003-02-06 20:36 ` Andrew Morton
2003-02-06 21:05 ` Thomas Molina
2003-02-06 21:14 ` Andreas Dilger
2003-02-06 22:35 ` Thomas Molina
2003-02-06 21:23 ` Andrew Morton
2003-02-06 21:33 ` Thomas Molina
2003-02-06 21:40 ` Andrew Morton
[not found] <Pine.LNX.4.44.0302061848360.851-200000@localhost.localdomain>
2003-02-07 19:59 ` Thomas Molina
2003-02-07 22:15 ` Andrew Morton
2003-02-07 23:54 ` Thomas Molina
2003-02-07 23:40 ` Andrew Morton
2003-02-08 1:48 ` Thomas Molina
2003-02-08 2:06 ` Andrew Morton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).