* menuconfig elements unaligned
@ 2006-01-18 20:20 Jan Engelhardt
2006-01-18 20:37 ` Sam Ravnborg
2006-01-23 5:05 ` Randy.Dunlap
0 siblings, 2 replies; 7+ messages in thread
From: Jan Engelhardt @ 2006-01-18 20:20 UTC (permalink / raw)
To: Linux Kernel Mailing List
Hi,
in Drivers > Network > 10 or 100Mbit, this shows up:
[*] EISA, VLB, PCI and on board controllers
< > AMD PCnet32 PCI support
< > AMD 8111 (new PCI lance) support
< > Adaptec Starfire/DuraLAN support
< > Broadcom 4400 ethernet support (EXPERIMENTAL)
< > Reverse Engineered nForce Ethernet support (EXPERIMENTAL)
< > Digi Intl. RightSwitch SE-X support
< > EtherExpressPro/100 support (eepro100, original Becker driver)
< > Intel(R) PRO/100+ support
Deactivating EISA would suggest that Digi Intl. and everything below would
remain visible, but they do not. If someone got the time to, please fix it.
Thanks.
Jan Engelhardt
--
| Alphagate Systems, http://alphagate.hopto.org/
| jengelh's site, http://jengelh.hopto.org/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: menuconfig elements unaligned
2006-01-18 20:20 menuconfig elements unaligned Jan Engelhardt
@ 2006-01-18 20:37 ` Sam Ravnborg
2006-01-23 5:05 ` Randy.Dunlap
1 sibling, 0 replies; 7+ messages in thread
From: Sam Ravnborg @ 2006-01-18 20:37 UTC (permalink / raw)
To: Jan Engelhardt; +Cc: Linux Kernel Mailing List
On Wed, Jan 18, 2006 at 09:20:11PM +0100, Jan Engelhardt wrote:
> Hi,
>
>
> in Drivers > Network > 10 or 100Mbit, this shows up:
>
> [*] EISA, VLB, PCI and on board controllers
> < > AMD PCnet32 PCI support
> < > AMD 8111 (new PCI lance) support
> < > Adaptec Starfire/DuraLAN support
> < > Broadcom 4400 ethernet support (EXPERIMENTAL)
> < > Reverse Engineered nForce Ethernet support (EXPERIMENTAL)
> < > Digi Intl. RightSwitch SE-X support
> < > EtherExpressPro/100 support (eepro100, original Becker driver)
> < > Intel(R) PRO/100+ support
>
> Deactivating EISA would suggest that Digi Intl. and everything below would
> remain visible, but they do not. If someone got the time to, please fix it.
Looks OK here.
amd64 with defconfig.
Sam
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: menuconfig elements unaligned
2006-01-18 20:20 menuconfig elements unaligned Jan Engelhardt
2006-01-18 20:37 ` Sam Ravnborg
@ 2006-01-23 5:05 ` Randy.Dunlap
2006-01-23 5:23 ` [PATCH] menu: relocate DOUBLEFAULT option Randy.Dunlap
` (2 more replies)
1 sibling, 3 replies; 7+ messages in thread
From: Randy.Dunlap @ 2006-01-23 5:05 UTC (permalink / raw)
To: Jan Engelhardt; +Cc: linux-kernel
On Wed, 18 Jan 2006 21:20:11 +0100 (MET) Jan Engelhardt wrote:
> Hi,
>
>
> in Drivers > Network > 10 or 100Mbit, this shows up:
>
> [*] EISA, VLB, PCI and on board controllers
> < > AMD PCnet32 PCI support
> < > AMD 8111 (new PCI lance) support
> < > Adaptec Starfire/DuraLAN support
> < > Broadcom 4400 ethernet support (EXPERIMENTAL)
> < > Reverse Engineered nForce Ethernet support (EXPERIMENTAL)
> < > Digi Intl. RightSwitch SE-X support
> < > EtherExpressPro/100 support (eepro100, original Becker driver)
> < > Intel(R) PRO/100+ support
>
> Deactivating EISA would suggest that Digi Intl. and everything below would
> remain visible, but they do not. If someone got the time to, please fix it.
> Thanks.
Like Sam replied, I don't see a problem. But the indentation shown
above isn't how I see it on-screen. The Digi, EtherExpressPro/100,
and Intel(R) PRO/100+ are all indented under EISA/VLB/PCI for me.
However, here's another one. On ARCH=i386, the top-level menu shows
[ ] Enable doublefault exception handler
(menuconfig or xconfig)
This is from arch/i386/Kconfig (line 50). Surely this should be
under "Processor type and features" or some other menu, not at the
top level.
---
~Randy
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH] menu: relocate DOUBLEFAULT option
2006-01-23 5:05 ` Randy.Dunlap
@ 2006-01-23 5:23 ` Randy.Dunlap
2006-01-23 5:57 ` menuconfig elements unaligned Sam Ravnborg
2006-01-25 13:54 ` Jan Engelhardt
2 siblings, 0 replies; 7+ messages in thread
From: Randy.Dunlap @ 2006-01-23 5:23 UTC (permalink / raw)
To: lkml; +Cc: jengelh, akpm
From: Randy Dunlap <rdunlap@xenotime.net>
Move the DOUBLEFAULT option from the top-level menu to the
EMBEDDED menu. Only applicable to X86_32.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
---
arch/i386/Kconfig | 9 ---------
init/Kconfig | 9 +++++++++
2 files changed, 9 insertions(+), 9 deletions(-)
--- linux-2616-rc1g4.orig/arch/i386/Kconfig
+++ linux-2616-rc1g4/arch/i386/Kconfig
@@ -47,15 +47,6 @@ config DMI
source "init/Kconfig"
-config DOUBLEFAULT
- default y
- bool "Enable doublefault exception handler" if EMBEDDED
- help
- This option allows trapping of rare doublefault exceptions that
- would otherwise cause a system to silently reboot. Disabling this
- option saves about 4k and might cause you much additional grey
- hair.
-
menu "Processor type and features"
choice
--- linux-2616-rc1g4.orig/init/Kconfig
+++ linux-2616-rc1g4/init/Kconfig
@@ -412,6 +412,15 @@ config SLAB
SLOB is more space efficient but does not scale well and is
more susceptible to fragmentation.
+config DOUBLEFAULT
+ default y
+ bool "Enable doublefault exception handler" if EMBEDDED && X86_32
+ help
+ This option allows trapping of rare doublefault exceptions that
+ would otherwise cause a system to silently reboot. Disabling this
+ option saves about 4k and might cause you much additional grey
+ hair.
+
endmenu # General setup
config TINY_SHMEM
---
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: menuconfig elements unaligned
2006-01-23 5:05 ` Randy.Dunlap
2006-01-23 5:23 ` [PATCH] menu: relocate DOUBLEFAULT option Randy.Dunlap
@ 2006-01-23 5:57 ` Sam Ravnborg
2006-01-25 13:54 ` Jan Engelhardt
2 siblings, 0 replies; 7+ messages in thread
From: Sam Ravnborg @ 2006-01-23 5:57 UTC (permalink / raw)
To: Randy.Dunlap; +Cc: Jan Engelhardt, linux-kernel
On Sun, Jan 22, 2006 at 09:05:24PM -0800, Randy.Dunlap wrote:
>
> However, here's another one. On ARCH=i386, the top-level menu shows
> [ ] Enable doublefault exception handler
>
> (menuconfig or xconfig)
> This is from arch/i386/Kconfig (line 50). Surely this should be
> under "Processor type and features" or some other menu, not at the
> top level.
I recall Andrew has a patch in his queue for this one already.
But not sure and no recent -mm handy.
Sam
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: menuconfig elements unaligned
2006-01-23 5:05 ` Randy.Dunlap
2006-01-23 5:23 ` [PATCH] menu: relocate DOUBLEFAULT option Randy.Dunlap
2006-01-23 5:57 ` menuconfig elements unaligned Sam Ravnborg
@ 2006-01-25 13:54 ` Jan Engelhardt
2006-01-25 18:25 ` Jean Delvare
2 siblings, 1 reply; 7+ messages in thread
From: Jan Engelhardt @ 2006-01-25 13:54 UTC (permalink / raw)
To: Randy.Dunlap; +Cc: linux-kernel
>> in Drivers > Network > 10 or 100Mbit, this shows up:
>>
>> [*] EISA, VLB, PCI and on board controllers
>> < > AMD PCnet32 PCI support
>> < > AMD 8111 (new PCI lance) support
>> < > Adaptec Starfire/DuraLAN support
>> < > Broadcom 4400 ethernet support (EXPERIMENTAL)
>> < > Reverse Engineered nForce Ethernet support (EXPERIMENTAL)
>> < > Digi Intl. RightSwitch SE-X support
>> < > EtherExpressPro/100 support (eepro100, original Becker driver)
>> < > Intel(R) PRO/100+ support
>>
>> Deactivating EISA would suggest that Digi Intl. and everything below would
>> remain visible, but they do not. If someone got the time to, please fix it.
>> Thanks.
>
>Like Sam replied, I don't see a problem. But the indentation shown
>above isn't how I see it on-screen. The Digi, EtherExpressPro/100,
>and Intel(R) PRO/100+ are all indented under EISA/VLB/PCI for me.
Shrug. Ok, this time, a vanilla 2.6.15 pulled fresh from <mirror
of> kernel.org rather than a suse mod...
+----------------------- Ethernet (10 or 100Mbit) ------------------------+
| Arrow keys navigate the menu. <Enter> selects submenus --->. |
| Highlighted letters are hotkeys. Pressing <Y> includes, <N> excludes, |
| <M> modularizes features. Press <Esc><Esc> to exit, <?> for Help, </> |
| for Search. Legend: [*] built-in [ ] excluded <M> module < > |
| +^(-)-----------------------------------------------------------------+ |
| |[*] EISA, VLB, PCI and on board controllers | |
| |< > AMD PCnet32 PCI support | |
| |< > AMD 8111 (new PCI lance) support | |
| |< > Adaptec Starfire/DuraLAN support | |
| |< > Ansel Communications EISA 3200 support (EXPERIMENTAL) | |
| |< > Apricot Xen-II on board Ethernet | |
| |< > Broadcom 4400 ethernet support (EXPERIMENTAL) | |
| |< > Reverse Engineered nForce Ethernet support (EXPERIMENTAL) | |
| |< > CS89x0 support | |
| |< > Digi Intl. RightSwitch SE-X support | |
| |< > EtherExpressPro/100 support (eepro100, original Becker driver) | |
| +v(+)-----------------------------------------------------------------+ |
+-------------------------------------------------------------------------+
| <Select> < Exit > < Help > |
+-------------------------------------------------------------------------+
Jan Engelhardt
--
| Alphagate Systems, http://alphagate.hopto.org/
| jengelh's site, http://jengelh.hopto.org/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: menuconfig elements unaligned
2006-01-25 13:54 ` Jan Engelhardt
@ 2006-01-25 18:25 ` Jean Delvare
0 siblings, 0 replies; 7+ messages in thread
From: Jean Delvare @ 2006-01-25 18:25 UTC (permalink / raw)
To: Jan Engelhardt; +Cc: Randy Dunlap, linux-kernel
Hi Jan, all,
> Shrug. Ok, this time, a vanilla 2.6.15 pulled fresh from <mirror
> of> kernel.org rather than a suse mod...
>
> +----------------------- Ethernet (10 or 100Mbit) ------------------------+
> | Arrow keys navigate the menu. <Enter> selects submenus --->. |
> | Highlighted letters are hotkeys. Pressing <Y> includes, <N> excludes, |
> | <M> modularizes features. Press <Esc><Esc> to exit, <?> for Help, </> |
> | for Search. Legend: [*] built-in [ ] excluded <M> module < > |
> | +^(-)-----------------------------------------------------------------+ |
> | |[*] EISA, VLB, PCI and on board controllers | |
> | |< > AMD PCnet32 PCI support | |
> | |< > AMD 8111 (new PCI lance) support | |
> | |< > Adaptec Starfire/DuraLAN support | |
> | |< > Ansel Communications EISA 3200 support (EXPERIMENTAL) | |
> | |< > Apricot Xen-II on board Ethernet | |
> | |< > Broadcom 4400 ethernet support (EXPERIMENTAL) | |
> | |< > Reverse Engineered nForce Ethernet support (EXPERIMENTAL) | |
> | |< > CS89x0 support | |
> | |< > Digi Intl. RightSwitch SE-X support | |
> | |< > EtherExpressPro/100 support (eepro100, original Becker driver) | |
> | +v(+)-----------------------------------------------------------------+ |
> +-------------------------------------------------------------------------+
> | <Select> < Exit > < Help > |
> +-------------------------------------------------------------------------+
I reported this problem already:
http://lkml.org/lkml/2005/12/27/119
And the fix was merged 13 days ago:
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=fd85d765b75db608500c783e5bc41b63627957c8
So it's in 2.6.16-rc1 but not in 2.6.15 (nor 2.6.15.1).
Hope that helps,
--
Jean Delvare
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2006-01-25 18:25 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-01-18 20:20 menuconfig elements unaligned Jan Engelhardt
2006-01-18 20:37 ` Sam Ravnborg
2006-01-23 5:05 ` Randy.Dunlap
2006-01-23 5:23 ` [PATCH] menu: relocate DOUBLEFAULT option Randy.Dunlap
2006-01-23 5:57 ` menuconfig elements unaligned Sam Ravnborg
2006-01-25 13:54 ` Jan Engelhardt
2006-01-25 18:25 ` Jean Delvare
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).