linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2] net: macb: Applied changes according to review made by Andy Shevchenko.
       [not found] <1482325169-22771-1-git-send-email-bfolta@cadence.com>
@ 2016-12-21 13:04 ` Bartosz Folta
  0 siblings, 0 replies; only message in thread
From: Bartosz Folta @ 2016-12-21 13:04 UTC (permalink / raw)
  To: Nicolas Ferre, David S. Miller, Niklas Cassel, Alexandre Torgue,
	Satanand Burla, Raghu Vatsavayi, Simon Horman, linux-kernel,
	netdev
  Cc: Bartosz Folta, Rafal Ozieblo

This patch is sent in regard to recently applied patch
Commit 83a77e9ec4150ee4acc635638f7dedd9da523a26
net: macb: Added PCI wrapper for Platform Driver.

Signed-off-by: Bartosz Folta <bfolta@cadence.com>
---
Changed in v2:
Size of DMA mask is set based on value held by PCI device.
---
 drivers/net/ethernet/cadence/macb_pci.c | 27 ++++++++++-----------------
 1 file changed, 10 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb_pci.c b/drivers/net/ethernet/cadence/macb_pci.c
index 92be2cd..9906fda 100644
--- a/drivers/net/ethernet/cadence/macb_pci.c
+++ b/drivers/net/ethernet/cadence/macb_pci.c
@@ -1,5 +1,5 @@
 /**
- * macb_pci.c - Cadence GEM PCI wrapper.
+ * Cadence GEM PCI wrapper.
  *
  * Copyright (C) 2016 Cadence Design Systems - http://www.cadence.com
  *
@@ -45,32 +45,27 @@ static int macb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct macb_platform_data plat_data;
 	struct resource res[2];
 
-	/* sanity check */
-	if (!id)
-		return -EINVAL;
-
 	/* enable pci device */
-	err = pci_enable_device(pdev);
+	err = pcim_enable_device(pdev);
 	if (err < 0) {
-		dev_err(&pdev->dev, "Enabling PCI device has failed: 0x%04X",
-			err);
-		return -EACCES;
+		dev_err(&pdev->dev, "Enabling PCI device has failed: %d", err);
+		return err;
 	}
 
 	pci_set_master(pdev);
 
 	/* set up resources */
 	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
-	res[0].start = pdev->resource[0].start;
-	res[0].end = pdev->resource[0].end;
+	res[0].start = pci_resource_start(pdev, 0);
+	res[0].end = pci_resource_end(pdev, 0);
 	res[0].name = PCI_DRIVER_NAME;
 	res[0].flags = IORESOURCE_MEM;
-	res[1].start = pdev->irq;
+	res[1].start = pci_irq_vector(pdev, 0);
 	res[1].name = PCI_DRIVER_NAME;
 	res[1].flags = IORESOURCE_IRQ;
 
-	dev_info(&pdev->dev, "EMAC physical base addr = 0x%p\n",
-		 (void *)(uintptr_t)pci_resource_start(pdev, 0));
+	dev_info(&pdev->dev, "EMAC physical base addr: %pa\n",
+		 &res[0].start);
 
 	/* set up macb platform data */
 	memset(&plat_data, 0, sizeof(plat_data));
@@ -100,7 +95,7 @@ static int macb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	plat_info.num_res = ARRAY_SIZE(res);
 	plat_info.data = &plat_data;
 	plat_info.size_data = sizeof(plat_data);
-	plat_info.dma_mask = DMA_BIT_MASK(32);
+	plat_info.dma_mask = pdev->dma_mask;
 
 	/* register platform device */
 	plat_dev = platform_device_register_full(&plat_info);
@@ -120,7 +115,6 @@ static int macb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	clk_unregister(plat_data.pclk);
 
 err_pclk_register:
-	pci_disable_device(pdev);
 	return err;
 }
 
@@ -130,7 +124,6 @@ static void macb_remove(struct pci_dev *pdev)
 	struct macb_platform_data *plat_data = dev_get_platdata(&plat_dev->dev);
 
 	platform_device_unregister(plat_dev);
-	pci_disable_device(pdev);
 	clk_unregister(plat_data->pclk);
 	clk_unregister(plat_data->hclk);
 }
-- 
1.9.1

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2016-12-21 13:04 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <1482325169-22771-1-git-send-email-bfolta@cadence.com>
2016-12-21 13:04 ` [PATCH v2] net: macb: Applied changes according to review made by Andy Shevchenko Bartosz Folta

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).