linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Masaki Ota <masaki.ota@jp.alps.com>
To: "Pali Rohár" <pali.rohar@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	"linux-input@vger.kernel.org" <linux-input@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Aaron Ma <aaron.ma@canonical.com>
Subject: RE: [PATCH] Input: ALPS - fix DualPoint flag for 74 03 28 devices
Date: Tue, 27 Mar 2018 04:37:19 +0000	[thread overview]
Message-ID: <TYXPR01MB0719F95C7B4E9FD0FF313BEFC7AC0@TYXPR01MB0719.jpnprd01.prod.outlook.com> (raw)
In-Reply-To: <20180325212541.5wzpvlkcbayfktrz@pali>

Hi, 

We can get OTP page 0 value by EA EA E9 commands, but we cannot get it by EA EA EA E9.
As far as I remember, Device initialization finish at EA command, then sends EA EA E9 commands.
In this case we cannot get correct OTP page 0 value.
So I changed this order. (We can get OTP page 1 value by both of EA F0 F0 E9 and F0 F0 E9.)

Best Regards,
Masaki Ota
-----Original Message-----
From: Pali Rohár [mailto:pali.rohar@gmail.com] 
Sent: Monday, March 26, 2018 6:26 AM
To: 太田 真喜 Masaki Ota <masaki.ota@jp.alps.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>; linux-input@vger.kernel.org; linux-kernel@vger.kernel.org; Aaron Ma <aaron.ma@canonical.com>
Subject: Re: [PATCH] Input: ALPS - fix DualPoint flag for 74 03 28 devices

On Tuesday 20 March 2018 11:47:26 Dmitry Torokhov wrote:
> On Mon, Jan 29, 2018 at 2:51 PM, dmitry.torokhov@gmail.com 
> <dmitry.torokhov@gmail.com> wrote:
> > Hi,
> >
> > On Thu, Nov 16, 2017 at 07:27:02AM +0000, Masaki Ota wrote:
> >> Hi, Pali, Aaron,
> >>
> >> Current code is correct device setting, previous code is wrong.
> >> If the trackstick does not work(DUALPOINT flag disable), Device Firmware setting is wrong.
> >>
> >> But recently I received the same report from Thinkpad L570 user, and I checked this device and found this device Firmware setting is wrong. Sorry for our mistake.
> >> Is your laptop L570 ?
> >>
> >> I will add code that supports the trackstick for this device.
> >
> > Sorry for resurrecting this old thread, I am just trying to 
> > understand what went wrong here. Is the sequence of "f0 f0 e9" and 
> > "ea ea e9" is important in getting the correct OTP data and we 
> > originally got this order wrong? It is not clear from the original 
> > patch and discussion that this change was intentional.
> 
> Could I please get an answer to my question?
> 
> Thanks!

Masaki, this question is for you ↑↑↑

> >
> > Thanks.
> >
> >>
> >> Best Regards,
> >> Masaki Ota
> >> -----Original Message-----
> >> From: Pali Rohár [mailto:pali.rohar@gmail.com]
> >> Sent: Wednesday, November 15, 2017 5:35 PM
> >> To: 太田 真喜 Masaki Ota <masaki.ota@jp.alps.com>
> >> Cc: linux-input@vger.kernel.org; linux-kernel@vger.kernel.org; 
> >> dmitry.torokhov@gmail.com; Aaron Ma <aaron.ma@canonical.com>
> >> Subject: Re: [PATCH] Input: ALPS - fix DualPoint flag for 74 03 28 
> >> devices
> >>
> >> On Wednesday 15 November 2017 14:34:04 Aaron Ma wrote:
> >> > There is a regression of commit 4a646580f793 ("Input: ALPS - fix 
> >> > two-finger scroll breakage"), ALPS device fails with log:
> >> >
> >> > psmouse serio1: alps: Rejected trackstick packet from non 
> >> > DualPoint device
> >> >
> >> > ALPS device with id "74 03 28" report OTP[0] data 0xCE after 
> >> > commit 4a646580f793, after restore the OTP reading order, it 
> >> > becomes to 0x10 as before and reports the right flag.
> >> >
> >> > Fixes: 4a646580f793 ("Input: ALPS - fix two-finger scroll 
> >> > breakage")
> >> > Cc: <stable@vger.kernel.org>
> >> > Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
> >> > ---
> >> >  drivers/input/mouse/alps.c | 4 ++--
> >> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >> >
> >> > diff --git a/drivers/input/mouse/alps.c 
> >> > b/drivers/input/mouse/alps.c index 579b899add26..c59b8f7ca2fc 
> >> > 100644
> >> > --- a/drivers/input/mouse/alps.c
> >> > +++ b/drivers/input/mouse/alps.c
> >> > @@ -2562,8 +2562,8 @@ static int alps_set_defaults_ss4_v2(struct 
> >> > psmouse *psmouse,
> >> >
> >> >     memset(otp, 0, sizeof(otp));
> >> >
> >> > -   if (alps_get_otp_values_ss4_v2(psmouse, 1, &otp[1][0]) ||
> >> > -       alps_get_otp_values_ss4_v2(psmouse, 0, &otp[0][0]))
> >> > +   if (alps_get_otp_values_ss4_v2(psmouse, 0, &otp[0][0]) ||
> >> > +       alps_get_otp_values_ss4_v2(psmouse, 1, &otp[1][0]))
> >> >             return -1;
> >> >
> >> >     alps_update_device_area_ss4_v2(otp, priv);
> >>
> >> Masaki Ota, please look at this patch as it partially revert your 
> >> commit
> >> 4a646580f793 ("Input: ALPS - fix two-finger scroll breakage"). Something smells here.
> >>
> >> --
> >> Pali Rohár
> >> pali.rohar@gmail.com
> >
> > --
> > Dmitry
> 
> 
> 

--
Pali Rohár
pali.rohar@gmail.com

  reply	other threads:[~2018-03-27  4:37 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-15  6:34 [PATCH] Input: ALPS - fix DualPoint flag for 74 03 28 devices Aaron Ma
2017-11-15  8:35 ` Pali Rohár
2017-11-16  7:27   ` Masaki Ota
2017-11-16  9:07     ` Aaron Ma
2018-01-29 22:51     ` dmitry.torokhov
2018-03-20 18:47       ` Dmitry Torokhov
2018-03-25 21:25         ` Pali Rohár
2018-03-27  4:37           ` Masaki Ota [this message]
2018-03-28  7:38             ` Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=TYXPR01MB0719F95C7B4E9FD0FF313BEFC7AC0@TYXPR01MB0719.jpnprd01.prod.outlook.com \
    --to=masaki.ota@jp.alps.com \
    --cc=aaron.ma@canonical.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pali.rohar@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).