* Re: Patch "powerpc/64s: flush L1D after user accesses" has been added to the 4.4-stable tree
[not found] <160585744921681@kroah.com>
@ 2020-11-24 3:18 ` yangerkun
2020-11-24 6:06 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: yangerkun @ 2020-11-24 3:18 UTC (permalink / raw)
To: linux-kernel, dja, gregkh, npiggin; +Cc: stable-commits
在 2020/11/20 15:30, gregkh@linuxfoundation.org 写道:
>
> This is a note to let you know that I've just added the patch titled
>
> powerpc/64s: flush L1D after user accesses
>
> to the 4.4-stable tree which can be found at:
> http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
>
> The filename of the patch is:
> powerpc-64s-flush-l1d-after-user-accesses.patch
> and it can be found in the queue-4.4 subdirectory.
>
> If you, or anyone else, feels it should not be added to the stable tree,
> please let <stable@vger.kernel.org> know about it.
>
>
>>From foo@baz Fri Nov 20 08:28:41 AM CET 2020
> From: Daniel Axtens <dja@axtens.net>
> Date: Fri, 20 Nov 2020 11:07:04 +1100
> Subject: powerpc/64s: flush L1D after user accesses
> To: stable@vger.kernel.org
> Cc: dja@axtens.net
> Message-ID: <20201120000704.374811-9-dja@axtens.net>
>
> From: Nicholas Piggin <npiggin@gmail.com>
>
> commit 9a32a7e78bd0cd9a9b6332cbdc345ee5ffd0c5de upstream.
>
> IBM Power9 processors can speculatively operate on data in the L1 cache before
> it has been completely validated, via a way-prediction mechanism. It is not possible
> for an attacker to determine the contents of impermissible memory using this method,
> since these systems implement a combination of hardware and software security measures
> to prevent scenarios where protected data could be leaked.
>
> However these measures don't address the scenario where an attacker induces
> the operating system to speculatively execute instructions using data that the
> attacker controls. This can be used for example to speculatively bypass "kernel
> user access prevention" techniques, as discovered by Anthony Steinhauser of
> Google's Safeside Project. This is not an attack by itself, but there is a possibility
> it could be used in conjunction with side-channels or other weaknesses in the
> privileged code to construct an attack.
>
> This issue can be mitigated by flushing the L1 cache between privilege boundaries
> of concern. This patch flushes the L1 cache after user accesses.
>
> This is part of the fix for CVE-2020-4788.
>
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> Signed-off-by: Daniel Axtens <dja@axtens.net>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
> Documentation/kernel-parameters.txt | 4 +
> arch/powerpc/include/asm/book3s/64/kup-radix.h | 23 ++++++
> arch/powerpc/include/asm/feature-fixups.h | 9 ++
> arch/powerpc/include/asm/kup.h | 4 +
> arch/powerpc/include/asm/security_features.h | 3
> arch/powerpc/include/asm/setup.h | 1
> arch/powerpc/kernel/exceptions-64s.S | 86 +++++++------------------
> arch/powerpc/kernel/ppc_ksyms.c | 7 ++
> arch/powerpc/kernel/setup_64.c | 80 +++++++++++++++++++++++
> arch/powerpc/kernel/vmlinux.lds.S | 7 ++
> arch/powerpc/lib/feature-fixups.c | 50 ++++++++++++++
> arch/powerpc/platforms/powernv/setup.c | 7 +-
> arch/powerpc/platforms/pseries/setup.c | 4 +
> 13 files changed, 224 insertions(+), 61 deletions(-)
> create mode 100644 arch/powerpc/include/asm/book3s/64/kup-radix.h
>
> --- a/Documentation/kernel-parameters.txt
> +++ b/Documentation/kernel-parameters.txt
> @@ -2197,6 +2197,7 @@ bytes respectively. Such letter suffixes
> mds=off [X86]
> tsx_async_abort=off [X86]
> no_entry_flush [PPC]
> + no_uaccess_flush [PPC]
>
> auto (default)
> Mitigate all CPU vulnerabilities, but leave SMT
> @@ -2521,6 +2522,9 @@ bytes respectively. Such letter suffixes
> nospec_store_bypass_disable
> [HW] Disable all mitigations for the Speculative Store Bypass vulnerability
>
> + no_uaccess_flush
> + [PPC] Don't flush the L1-D cache after accessing user data.
> +
> noxsave [BUGS=X86] Disables x86 extended register state save
> and restore using xsave. The kernel will fallback to
> enabling legacy floating-point and sse state.
> --- /dev/null
> +++ b/arch/powerpc/include/asm/book3s/64/kup-radix.h
> @@ -0,0 +1,23 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H
> +#define _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H
> +#include <linux/jump_label.h>
> +
> +DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
> +
> +/* Prototype for function defined in exceptions-64s.S */
> +void do_uaccess_flush(void);
> +
> +static __always_inline void allow_user_access(void __user *to, const void __user *from,
> + unsigned long size)
> +{
> +}
> +
> +static inline void prevent_user_access(void __user *to, const void __user *from,
Hi,
This will redefine prevent_user_access and lead to compile error...
In file included from arch/powerpc/kernel/ppc_ksyms.c:10:0:
./arch/powerpc/include/asm/book3s/64/kup-radix.h:11:29: error:
redefinition of 'allow_user_access'
static __always_inline void allow_user_access(void __user *to, const
void __user *from,
^~~~~~~~~~~~~~~~~
In file included from ./arch/powerpc/include/asm/uaccess.h:12:0,
from arch/powerpc/kernel/ppc_ksyms.c:8:
./arch/powerpc/include/asm/kup.h:12:20: note: previous definition of
'allow_user_access' was here
static inline void allow_user_access(void __user *to, const void
__user *from,
^~~~~~~~~~~~~~~~~
In file included from arch/powerpc/kernel/ppc_ksyms.c:10:0:
./arch/powerpc/include/asm/book3s/64/kup-radix.h:16:20: error:
redefinition of 'prevent_user_access'
static inline void prevent_user_access(void __user *to, const void
__user *from,
^~~~~~~~~~~~~~~~~~~
In file included from ./arch/powerpc/include/asm/uaccess.h:12:0,
from arch/powerpc/kernel/ppc_ksyms.c:8:
./arch/powerpc/include/asm/kup.h:14:20: note: previous definition of
'prevent_user_access' was here
static inline void prevent_user_access(void __user *to, const void
__user *from,
^~~~~~~~~~~~~~~~~~~
make[1]: *** [scripts/Makefile.build:277:
arch/powerpc/kernel/ppc_ksyms.o] Error 1
make[1]: *** Waiting for unfinished jobs....
Thanks,
Kun.
> + unsigned long size)
> +{
> + if (static_branch_unlikely(&uaccess_flush_key))
> + do_uaccess_flush();
> +}
> +
> +#endif /* _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H */
> --- a/arch/powerpc/include/asm/feature-fixups.h
> +++ b/arch/powerpc/include/asm/feature-fixups.h
> @@ -200,6 +200,14 @@ label##3: \
> FTR_ENTRY_OFFSET 955b-956b; \
> .popsection;
>
> +#define UACCESS_FLUSH_FIXUP_SECTION \
> +959: \
> + .pushsection __uaccess_flush_fixup,"a"; \
> + .align 2; \
> +960: \
> + FTR_ENTRY_OFFSET 959b-960b; \
> + .popsection;
> +
> #define ENTRY_FLUSH_FIXUP_SECTION \
> 957: \
> .pushsection __entry_flush_fixup,"a"; \
> @@ -242,6 +250,7 @@ extern long stf_barrier_fallback;
> extern long entry_flush_fallback;
> extern long __start___stf_entry_barrier_fixup, __stop___stf_entry_barrier_fixup;
> extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup;
> +extern long __start___uaccess_flush_fixup, __stop___uaccess_flush_fixup;
> extern long __start___entry_flush_fixup, __stop___entry_flush_fixup;
> extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;
> extern long __start___barrier_nospec_fixup, __stop___barrier_nospec_fixup;
> --- a/arch/powerpc/include/asm/kup.h
> +++ b/arch/powerpc/include/asm/kup.h
> @@ -6,10 +6,14 @@
>
> #include <asm/pgtable.h>
>
> +#ifdef CONFIG_PPC_BOOK3S_64
> +#include <asm/book3s/64/kup-radix.h>
> +#else
> static inline void allow_user_access(void __user *to, const void __user *from,
> unsigned long size) { }
> static inline void prevent_user_access(void __user *to, const void __user *from,
> unsigned long size) { }
> +#endif /* CONFIG_PPC_BOOK3S_64 */
>
> static inline void allow_read_from_user(const void __user *from, unsigned long size)
> {
> --- a/arch/powerpc/include/asm/security_features.h
> +++ b/arch/powerpc/include/asm/security_features.h
> @@ -87,6 +87,8 @@ static inline bool security_ftr_enabled(
> // The L1-D cache should be flushed when entering the kernel
> #define SEC_FTR_L1D_FLUSH_ENTRY 0x0000000000004000ull
>
> +// The L1-D cache should be flushed after user accesses from the kernel
> +#define SEC_FTR_L1D_FLUSH_UACCESS 0x0000000000008000ull
>
> // Features enabled by default
> #define SEC_FTR_DEFAULT \
> @@ -94,6 +96,7 @@ static inline bool security_ftr_enabled(
> SEC_FTR_L1D_FLUSH_PR | \
> SEC_FTR_BNDS_CHK_SPEC_BAR | \
> SEC_FTR_L1D_FLUSH_ENTRY | \
> + SEC_FTR_L1D_FLUSH_UACCESS | \
> SEC_FTR_FAVOUR_SECURITY)
>
> #endif /* _ASM_POWERPC_SECURITY_FEATURES_H */
> --- a/arch/powerpc/include/asm/setup.h
> +++ b/arch/powerpc/include/asm/setup.h
> @@ -46,6 +46,7 @@ void setup_barrier_nospec(void);
> #else
> static inline void setup_barrier_nospec(void) { };
> #endif
> +void do_uaccess_flush_fixups(enum l1d_flush_type types);
> void do_entry_flush_fixups(enum l1d_flush_type types);
> void do_barrier_nospec_fixups(bool enable);
> extern bool barrier_nospec_enabled;
> --- a/arch/powerpc/kernel/exceptions-64s.S
> +++ b/arch/powerpc/kernel/exceptions-64s.S
> @@ -1630,14 +1630,9 @@ stf_barrier_fallback:
> .endr
> blr
>
> - .globl rfi_flush_fallback
> -rfi_flush_fallback:
> - SET_SCRATCH0(r13);
> - GET_PACA(r13);
> - std r9,PACA_EXRFI+EX_R9(r13)
> - std r10,PACA_EXRFI+EX_R10(r13)
> - std r11,PACA_EXRFI+EX_R11(r13)
> - mfctr r9
> +
> +/* Clobbers r10, r11, ctr */
> +.macro L1D_DISPLACEMENT_FLUSH
> ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
> ld r11,PACA_L1D_FLUSH_SIZE(r13)
> srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
> @@ -1663,7 +1658,18 @@ rfi_flush_fallback:
> ld r11,(0x80 + 8)*7(r10)
> addi r10,r10,0x80*8
> bdnz 1b
> +.endm
> +
>
> + .globl rfi_flush_fallback
> +rfi_flush_fallback:
> + SET_SCRATCH0(r13);
> + GET_PACA(r13);
> + std r9,PACA_EXRFI+EX_R9(r13)
> + std r10,PACA_EXRFI+EX_R10(r13)
> + std r11,PACA_EXRFI+EX_R11(r13)
> + mfctr r9
> + L1D_DISPLACEMENT_FLUSH
> mtctr r9
> ld r9,PACA_EXRFI+EX_R9(r13)
> ld r10,PACA_EXRFI+EX_R10(r13)
> @@ -1679,32 +1685,7 @@ hrfi_flush_fallback:
> std r10,PACA_EXRFI+EX_R10(r13)
> std r11,PACA_EXRFI+EX_R11(r13)
> mfctr r9
> - ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
> - ld r11,PACA_L1D_FLUSH_SIZE(r13)
> - srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
> - mtctr r11
> - DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
> -
> - /* order ld/st prior to dcbt stop all streams with flushing */
> - sync
> -
> - /*
> - * The load adresses are at staggered offsets within cachelines,
> - * which suits some pipelines better (on others it should not
> - * hurt).
> - */
> -1:
> - ld r11,(0x80 + 8)*0(r10)
> - ld r11,(0x80 + 8)*1(r10)
> - ld r11,(0x80 + 8)*2(r10)
> - ld r11,(0x80 + 8)*3(r10)
> - ld r11,(0x80 + 8)*4(r10)
> - ld r11,(0x80 + 8)*5(r10)
> - ld r11,(0x80 + 8)*6(r10)
> - ld r11,(0x80 + 8)*7(r10)
> - addi r10,r10,0x80*8
> - bdnz 1b
> -
> + L1D_DISPLACEMENT_FLUSH
> mtctr r9
> ld r9,PACA_EXRFI+EX_R9(r13)
> ld r10,PACA_EXRFI+EX_R10(r13)
> @@ -1718,38 +1699,14 @@ entry_flush_fallback:
> std r10,PACA_EXRFI+EX_R10(r13)
> std r11,PACA_EXRFI+EX_R11(r13)
> mfctr r9
> - ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
> - ld r11,PACA_L1D_FLUSH_SIZE(r13)
> - srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
> - mtctr r11
> - DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
> -
> - /* order ld/st prior to dcbt stop all streams with flushing */
> - sync
> -
> - /*
> - * The load addresses are at staggered offsets within cachelines,
> - * which suits some pipelines better (on others it should not
> - * hurt).
> - */
> -1:
> - ld r11,(0x80 + 8)*0(r10)
> - ld r11,(0x80 + 8)*1(r10)
> - ld r11,(0x80 + 8)*2(r10)
> - ld r11,(0x80 + 8)*3(r10)
> - ld r11,(0x80 + 8)*4(r10)
> - ld r11,(0x80 + 8)*5(r10)
> - ld r11,(0x80 + 8)*6(r10)
> - ld r11,(0x80 + 8)*7(r10)
> - addi r10,r10,0x80*8
> - bdnz 1b
> -
> + L1D_DISPLACEMENT_FLUSH
> mtctr r9
> ld r9,PACA_EXRFI+EX_R9(r13)
> ld r10,PACA_EXRFI+EX_R10(r13)
> ld r11,PACA_EXRFI+EX_R11(r13)
> blr
>
> +
> /*
> * Hash table stuff
> */
> @@ -1909,3 +1866,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
> 1: addi r3,r1,STACK_FRAME_OVERHEAD
> bl kernel_bad_stack
> b 1b
> +
> +_KPROBE(do_uaccess_flush)
> + UACCESS_FLUSH_FIXUP_SECTION
> + nop
> + nop
> + nop
> + blr
> + L1D_DISPLACEMENT_FLUSH
> + blr
> --- a/arch/powerpc/kernel/ppc_ksyms.c
> +++ b/arch/powerpc/kernel/ppc_ksyms.c
> @@ -6,6 +6,9 @@
> #include <asm/cacheflush.h>
> #include <asm/epapr_hcalls.h>
> #include <asm/uaccess.h>
> +#ifdef CONFIG_PPC64
> +#include <asm/book3s/64/kup-radix.h>
> +#endif
>
> EXPORT_SYMBOL(flush_dcache_range);
> EXPORT_SYMBOL(flush_icache_range);
> @@ -46,3 +49,7 @@ EXPORT_SYMBOL(epapr_hypercall_start);
> EXPORT_SYMBOL(current_stack_pointer);
>
> EXPORT_SYMBOL(__arch_clear_user);
> +
> +#ifdef CONFIG_PPC64
> +EXPORT_SYMBOL(do_uaccess_flush);
> +#endif
> --- a/arch/powerpc/kernel/setup_64.c
> +++ b/arch/powerpc/kernel/setup_64.c
> @@ -845,8 +845,12 @@ static enum l1d_flush_type enabled_flush
> static void *l1d_flush_fallback_area;
> static bool no_rfi_flush;
> static bool no_entry_flush;
> +static bool no_uaccess_flush;
> bool rfi_flush;
> bool entry_flush;
> +bool uaccess_flush;
> +DEFINE_STATIC_KEY_FALSE(uaccess_flush_key);
> +EXPORT_SYMBOL(uaccess_flush_key);
>
> static int __init handle_no_rfi_flush(char *p)
> {
> @@ -864,6 +868,14 @@ static int __init handle_no_entry_flush(
> }
> early_param("no_entry_flush", handle_no_entry_flush);
>
> +static int __init handle_no_uaccess_flush(char *p)
> +{
> + pr_info("uaccess-flush: disabled on command line.");
> + no_uaccess_flush = true;
> + return 0;
> +}
> +early_param("no_uaccess_flush", handle_no_uaccess_flush);
> +
> /*
> * The RFI flush is not KPTI, but because users will see doco that says to use
> * nopti we hijack that option here to also disable the RFI flush.
> @@ -907,6 +919,23 @@ void entry_flush_enable(bool enable)
> entry_flush = enable;
> }
>
> +void uaccess_flush_enable(bool enable)
> +{
> + if (enable) {
> + do_uaccess_flush_fixups(enabled_flush_types);
> + if (static_key_initialized)
> + static_branch_enable(&uaccess_flush_key);
> + else
> + printk(KERN_DEBUG "uaccess-flush: deferring static key until after static key initialization\n");
> + on_each_cpu(do_nothing, NULL, 1);
> + } else {
> + static_branch_disable(&uaccess_flush_key);
> + do_uaccess_flush_fixups(L1D_FLUSH_NONE);
> + }
> +
> + uaccess_flush = enable;
> +}
> +
> static void __ref init_fallback_flush(void)
> {
> u64 l1d_size, limit;
> @@ -961,6 +990,15 @@ void setup_entry_flush(bool enable)
> entry_flush_enable(enable);
> }
>
> +void setup_uaccess_flush(bool enable)
> +{
> + if (cpu_mitigations_off())
> + return;
> +
> + if (!no_uaccess_flush)
> + uaccess_flush_enable(enable);
> +}
> +
> #ifdef CONFIG_DEBUG_FS
> static int rfi_flush_set(void *data, u64 val)
> {
> @@ -1014,12 +1052,54 @@ static int entry_flush_get(void *data, u
>
> DEFINE_SIMPLE_ATTRIBUTE(fops_entry_flush, entry_flush_get, entry_flush_set, "%llu\n");
>
> +static int uaccess_flush_set(void *data, u64 val)
> +{
> + bool enable;
> +
> + if (val == 1)
> + enable = true;
> + else if (val == 0)
> + enable = false;
> + else
> + return -EINVAL;
> +
> + /* Only do anything if we're changing state */
> + if (enable != uaccess_flush)
> + uaccess_flush_enable(enable);
> +
> + return 0;
> +}
> +
> +static int uaccess_flush_get(void *data, u64 *val)
> +{
> + *val = uaccess_flush ? 1 : 0;
> + return 0;
> +}
> +
> +DEFINE_SIMPLE_ATTRIBUTE(fops_uaccess_flush, uaccess_flush_get, uaccess_flush_set, "%llu\n");
> +
> +
> static __init int rfi_flush_debugfs_init(void)
> {
> debugfs_create_file("rfi_flush", 0600, powerpc_debugfs_root, NULL, &fops_rfi_flush);
> debugfs_create_file("entry_flush", 0600, powerpc_debugfs_root, NULL, &fops_entry_flush);
> + debugfs_create_file("uaccess_flush", 0600, powerpc_debugfs_root, NULL, &fops_uaccess_flush);
> return 0;
> }
> device_initcall(rfi_flush_debugfs_init);
> #endif
> +
> +/*
> + * setup_uaccess_flush runs before jump_label_init, so we can't do the setup
> + * there. Do it now instead.
> + */
> +static __init int uaccess_flush_static_key_init(void)
> +{
> + if (uaccess_flush) {
> + printk(KERN_DEBUG "uaccess-flush: switching on static key\n");
> + static_branch_enable(&uaccess_flush_key);
> + }
> + return 0;
> +}
> +early_initcall(uaccess_flush_static_key_init);
> #endif /* CONFIG_PPC_BOOK3S_64 */
> --- a/arch/powerpc/kernel/vmlinux.lds.S
> +++ b/arch/powerpc/kernel/vmlinux.lds.S
> @@ -81,6 +81,13 @@ SECTIONS
> }
>
> . = ALIGN(8);
> + __uaccess_flush_fixup : AT(ADDR(__uaccess_flush_fixup) - LOAD_OFFSET) {
> + __start___uaccess_flush_fixup = .;
> + *(__uaccess_flush_fixup)
> + __stop___uaccess_flush_fixup = .;
> + }
> +
> + . = ALIGN(8);
> __entry_flush_fixup : AT(ADDR(__entry_flush_fixup) - LOAD_OFFSET) {
> __start___entry_flush_fixup = .;
> *(__entry_flush_fixup)
> --- a/arch/powerpc/lib/feature-fixups.c
> +++ b/arch/powerpc/lib/feature-fixups.c
> @@ -229,6 +229,56 @@ void do_stf_barrier_fixups(enum stf_barr
> do_stf_exit_barrier_fixups(types);
> }
>
> +void do_uaccess_flush_fixups(enum l1d_flush_type types)
> +{
> + unsigned int instrs[4], *dest;
> + long *start, *end;
> + int i;
> +
> + start = PTRRELOC(&__start___uaccess_flush_fixup);
> + end = PTRRELOC(&__stop___uaccess_flush_fixup);
> +
> + instrs[0] = 0x60000000; /* nop */
> + instrs[1] = 0x60000000; /* nop */
> + instrs[2] = 0x60000000; /* nop */
> + instrs[3] = 0x4e800020; /* blr */
> +
> + i = 0;
> + if (types == L1D_FLUSH_FALLBACK) {
> + instrs[3] = 0x60000000; /* nop */
> + /* fallthrough to fallback flush */
> + }
> +
> + if (types & L1D_FLUSH_ORI) {
> + instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */
> + instrs[i++] = 0x63de0000; /* ori 30,30,0 L1d flush*/
> + }
> +
> + if (types & L1D_FLUSH_MTTRIG)
> + instrs[i++] = 0x7c12dba6; /* mtspr TRIG2,r0 (SPR #882) */
> +
> + for (i = 0; start < end; start++, i++) {
> + dest = (void *)start + *start;
> +
> + pr_devel("patching dest %lx\n", (unsigned long)dest);
> +
> + patch_instruction(dest, instrs[0]);
> +
> + patch_instruction((dest + 1), instrs[1]);
> + patch_instruction((dest + 2), instrs[2]);
> + patch_instruction((dest + 3), instrs[3]);
> + }
> +
> + printk(KERN_DEBUG "uaccess-flush: patched %d locations (%s flush)\n", i,
> + (types == L1D_FLUSH_NONE) ? "no" :
> + (types == L1D_FLUSH_FALLBACK) ? "fallback displacement" :
> + (types & L1D_FLUSH_ORI) ? (types & L1D_FLUSH_MTTRIG)
> + ? "ori+mttrig type"
> + : "ori type" :
> + (types & L1D_FLUSH_MTTRIG) ? "mttrig type"
> + : "unknown");
> +}
> +
> void do_entry_flush_fixups(enum l1d_flush_type types)
> {
> unsigned int instrs[3], *dest;
> --- a/arch/powerpc/platforms/powernv/setup.c
> +++ b/arch/powerpc/platforms/powernv/setup.c
> @@ -126,9 +126,10 @@ static void pnv_setup_rfi_flush(void)
>
> /*
> * 4.4 doesn't support Power9 bare metal, so we don't need to flush
> - * here - the flush fixes a P9 specific vulnerability.
> + * here - the flushes fix a P9 specific vulnerability.
> */
> security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY);
> + security_ftr_clear(SEC_FTR_L1D_FLUSH_UACCESS);
>
> enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \
> (security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) || \
> @@ -140,6 +141,10 @@ static void pnv_setup_rfi_flush(void)
> enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
> security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
> setup_entry_flush(enable);
> +
> + enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
> + security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
> + setup_uaccess_flush(enable);
> }
>
> static void __init pnv_setup_arch(void)
> --- a/arch/powerpc/platforms/pseries/setup.c
> +++ b/arch/powerpc/platforms/pseries/setup.c
> @@ -588,6 +588,10 @@ void pseries_setup_rfi_flush(void)
> enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
> security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
> setup_entry_flush(enable);
> +
> + enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
> + security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
> + setup_uaccess_flush(enable);
> }
>
> static void __init pSeries_setup_arch(void)
>
>
> Patches currently in stable-queue which might be from dja@axtens.net are
>
> queue-4.4/powerpc-add-a-framework-for-user-access-tracking.patch
> queue-4.4/powerpc-implement-user_access_begin-and-friends.patch
> queue-4.4/powerpc-uaccess-evaluate-macro-arguments-once-before-user-access-is-allowed.patch
> queue-4.4/powerpc-64s-flush-l1d-after-user-accesses.patch
> queue-4.4/powerpc-64s-move-some-exception-handlers-out-of-line.patch
> queue-4.4/powerpc-64s-flush-l1d-on-kernel-entry.patch
> queue-4.4/powerpc-fix-__clear_user-with-kuap-enabled.patch
> queue-4.4/powerpc-64s-define-maskable_relon_exception_pseries_ool.patch
> .
>
^ permalink raw reply [flat|nested] 2+ messages in thread