* [PATCH v1] riscv: dts: sifive unleashed: Add PWM controlled LEDs
@ 2022-10-12 11:09 Emil Renner Berthing
2022-10-12 18:16 ` Conor Dooley
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Emil Renner Berthing @ 2022-10-12 11:09 UTC (permalink / raw)
To: linux-riscv
Cc: Rob Herring, Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt,
Alexandre Ghiti, Bin Meng, devicetree, linux-kernel
This adds the 4 PWM controlled green LEDs to the HiFive Unleashed device
tree. The schematic doesn't specify any special function for the LEDs,
so they're added here without any default triggers and named d1, d2, d3
and d4 just like in the schematic.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
---
Yes this board is old, but I'm trying to get rid of custom riscv patches in
the Ubuntu kernel.
.../boot/dts/sifive/hifive-unleashed-a00.dts | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
index ced0d4e47938..900a50526d77 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
@@ -3,6 +3,8 @@
#include "fu540-c000.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
#define RTCCLK_FREQ 1000000
@@ -42,6 +44,42 @@ gpio-restart {
compatible = "gpio-restart";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
+
+ led-controller {
+ compatible = "pwm-leds";
+
+ led-d1 {
+ pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
+ active-low;
+ color = <LED_COLOR_ID_GREEN>;
+ max-brightness = <255>;
+ label = "d1";
+ };
+
+ led-d2 {
+ pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
+ active-low;
+ color = <LED_COLOR_ID_GREEN>;
+ max-brightness = <255>;
+ label = "d2";
+ };
+
+ led-d3 {
+ pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
+ active-low;
+ color = <LED_COLOR_ID_GREEN>;
+ max-brightness = <255>;
+ label = "d3";
+ };
+
+ led-d4 {
+ pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
+ active-low;
+ color = <LED_COLOR_ID_GREEN>;
+ max-brightness = <255>;
+ label = "d4";
+ };
+ };
};
&uart0 {
--
2.37.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v1] riscv: dts: sifive unleashed: Add PWM controlled LEDs
2022-10-12 11:09 [PATCH v1] riscv: dts: sifive unleashed: Add PWM controlled LEDs Emil Renner Berthing
@ 2022-10-12 18:16 ` Conor Dooley
2022-10-28 22:42 ` Palmer Dabbelt
2022-10-28 22:47 ` Palmer Dabbelt
2 siblings, 0 replies; 4+ messages in thread
From: Conor Dooley @ 2022-10-12 18:16 UTC (permalink / raw)
To: Emil Renner Berthing
Cc: linux-riscv, Rob Herring, Krzysztof Kozlowski, Paul Walmsley,
Palmer Dabbelt, Alexandre Ghiti, Bin Meng, devicetree,
linux-kernel
On Wed, Oct 12, 2022 at 01:09:28PM +0200, Emil Renner Berthing wrote:
> This adds the 4 PWM controlled green LEDs to the HiFive Unleashed device
> tree. The schematic doesn't specify any special function for the LEDs,
> so they're added here without any default triggers and named d1, d2, d3
> and d4 just like in the schematic.
>
> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
> ---
>
> Yes this board is old, but I'm trying to get rid of custom riscv patches in
> the Ubuntu kernel.
Old maybe, but some of us still have them ;)
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Twiddled the sysfs knobs a bit too so:
Tested-by: Conor Dooley <conor.dooley@microchip.com>
>
> .../boot/dts/sifive/hifive-unleashed-a00.dts | 38 +++++++++++++++++++
> 1 file changed, 38 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> index ced0d4e47938..900a50526d77 100644
> --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> @@ -3,6 +3,8 @@
>
> #include "fu540-c000.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pwm/pwm.h>
>
> /* Clock frequency (in Hz) of the PCB crystal for rtcclk */
> #define RTCCLK_FREQ 1000000
> @@ -42,6 +44,42 @@ gpio-restart {
> compatible = "gpio-restart";
> gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
> };
> +
> + led-controller {
> + compatible = "pwm-leds";
> +
> + led-d1 {
> + pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
> + active-low;
> + color = <LED_COLOR_ID_GREEN>;
> + max-brightness = <255>;
> + label = "d1";
> + };
> +
> + led-d2 {
> + pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
> + active-low;
> + color = <LED_COLOR_ID_GREEN>;
> + max-brightness = <255>;
> + label = "d2";
> + };
> +
> + led-d3 {
> + pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
> + active-low;
> + color = <LED_COLOR_ID_GREEN>;
> + max-brightness = <255>;
> + label = "d3";
> + };
> +
> + led-d4 {
> + pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
> + active-low;
> + color = <LED_COLOR_ID_GREEN>;
> + max-brightness = <255>;
> + label = "d4";
> + };
> + };
> };
>
> &uart0 {
> --
> 2.37.2
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v1] riscv: dts: sifive unleashed: Add PWM controlled LEDs
2022-10-12 11:09 [PATCH v1] riscv: dts: sifive unleashed: Add PWM controlled LEDs Emil Renner Berthing
2022-10-12 18:16 ` Conor Dooley
@ 2022-10-28 22:42 ` Palmer Dabbelt
2022-10-28 22:47 ` Palmer Dabbelt
2 siblings, 0 replies; 4+ messages in thread
From: Palmer Dabbelt @ 2022-10-28 22:42 UTC (permalink / raw)
To: Emil Renner Berthing, linux-riscv
Cc: Alexandre Ghiti, Rob Herring, devicetree, Palmer Dabbelt,
Paul Walmsley, linux-kernel, Krzysztof Kozlowski, Bin Meng
On Wed, 12 Oct 2022 13:09:28 +0200, Emil Renner Berthing wrote:
> This adds the 4 PWM controlled green LEDs to the HiFive Unleashed device
> tree. The schematic doesn't specify any special function for the LEDs,
> so they're added here without any default triggers and named d1, d2, d3
> and d4 just like in the schematic.
>
>
Applied, thanks!
[1/1] riscv: dts: sifive unleashed: Add PWM controlled LEDs
https://git.kernel.org/palmer/c/8bc8824d3019
Best regards,
--
Palmer Dabbelt <palmer@rivosinc.com>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v1] riscv: dts: sifive unleashed: Add PWM controlled LEDs
2022-10-12 11:09 [PATCH v1] riscv: dts: sifive unleashed: Add PWM controlled LEDs Emil Renner Berthing
2022-10-12 18:16 ` Conor Dooley
2022-10-28 22:42 ` Palmer Dabbelt
@ 2022-10-28 22:47 ` Palmer Dabbelt
2 siblings, 0 replies; 4+ messages in thread
From: Palmer Dabbelt @ 2022-10-28 22:47 UTC (permalink / raw)
To: emil.renner.berthing
Cc: linux-riscv, robh+dt, krzysztof.kozlowski+dt, Paul Walmsley,
alexandre.ghiti, bin.meng, devicetree, linux-kernel
On Wed, 12 Oct 2022 04:09:28 PDT (-0700), emil.renner.berthing@canonical.com wrote:
> This adds the 4 PWM controlled green LEDs to the HiFive Unleashed device
> tree. The schematic doesn't specify any special function for the LEDs,
> so they're added here without any default triggers and named d1, d2, d3
> and d4 just like in the schematic.
>
> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
> ---
>
> Yes this board is old, but I'm trying to get rid of custom riscv patches in
> the Ubuntu kernel.
IMO fixing stuff for old boards is great, particularly if they're broken
upstream but supported by distro kernels -- that's kind of a messy spot
to be in.
> .../boot/dts/sifive/hifive-unleashed-a00.dts | 38 +++++++++++++++++++
> 1 file changed, 38 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> index ced0d4e47938..900a50526d77 100644
> --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> @@ -3,6 +3,8 @@
>
> #include "fu540-c000.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pwm/pwm.h>
>
> /* Clock frequency (in Hz) of the PCB crystal for rtcclk */
> #define RTCCLK_FREQ 1000000
> @@ -42,6 +44,42 @@ gpio-restart {
> compatible = "gpio-restart";
> gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
> };
> +
> + led-controller {
> + compatible = "pwm-leds";
> +
> + led-d1 {
> + pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
> + active-low;
> + color = <LED_COLOR_ID_GREEN>;
> + max-brightness = <255>;
> + label = "d1";
> + };
> +
> + led-d2 {
> + pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
> + active-low;
> + color = <LED_COLOR_ID_GREEN>;
> + max-brightness = <255>;
> + label = "d2";
> + };
> +
> + led-d3 {
> + pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
> + active-low;
> + color = <LED_COLOR_ID_GREEN>;
> + max-brightness = <255>;
> + label = "d3";
> + };
> +
> + led-d4 {
> + pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
> + active-low;
> + color = <LED_COLOR_ID_GREEN>;
> + max-brightness = <255>;
> + label = "d4";
> + };
> + };
> };
>
> &uart0 {
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-10-28 22:48 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-10-12 11:09 [PATCH v1] riscv: dts: sifive unleashed: Add PWM controlled LEDs Emil Renner Berthing
2022-10-12 18:16 ` Conor Dooley
2022-10-28 22:42 ` Palmer Dabbelt
2022-10-28 22:47 ` Palmer Dabbelt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).