[PATCH v2 0/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas

[PATCH v2 0/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas

[Baoquan He]

Problem:
***
Stephen reported vread() will skip vm_map_ram areas when reading out
/proc/kcore with drgn utility. Please see below link to get more about
it:

  /proc/kcore reads 0's for vmap_block
  https://lore.kernel.org/all/87ilk6gos2.fsf@oracle.com/T/#u

Root cause:
***
The normal vmalloc API uses struct vmap_area to manage the virtual
kernel area allocated and associate a vm_struct to store more information
and passed out. However, area reserved through vm_map_ram() interface
doesn't allocate vm_struct to bind with. So the current code in vread()
will skip the vm_map_ram area through 'if (!va->vm)' conditional checking.

Solution:
***
There are two types of vm_map_ram area. One is the whole vmap_area being
reserved and mapped at one time; the other is the whole vmap_area with
VMAP_BLOCK_SIZE size being reserved at one time, while mapped into split
regions with smaller size several times via vb_alloc(). I will call the
2nd type vb region.

In patch 1 and 2, add flags into struct vmap_area to mark these two types
of vm_map_ram area, meanwhile add bitmap field used_map into struct
vmap_block to mark those vb regions being used to differentiate with dirty
and free regions in vmap_block.

With the help of above vmap_area->flags and vmap_block->used_map, we can
recognize them in vread() and handle them respectively in patch 3.

Besides,
***
In patch 5, let's ignore vmap area with VM_UNINITIALIZED set in
vm->flags, because this kind of area is created by calling
__vmalloc_node_range(), VM_UNINITIALIZED set indicating it has
vm_struct associated with, but is still during the page allocating and
mapping process.

In patch 6 and 7, change area flag from VM_ALLOC to VM_IOREMAP in two
places. This will show them as 'ioremap' in /proc/vmallocinfo, and
exclude them from /proc/kcore.

Testing
***
Only did the basic testing.

Changelog
***
v1->v2:
- Change alloc_vmap_area() to pass in va_flags so that we can pass and
  set vmap_area->flags for vm_map_ram area. With this, no extra action
  need be added to acquire vmap_area_lock when doing the vmap_area->flags
  setting. Uladzislau reviewed v1 and pointed out the issue.
- Improve vb_vread() to cover the case where reading is started from a
  dirty or free region.

RFC->v1:
- Add a new field flags in vmap_area to mark vm_map_ram area. It cold be
  risky reusing the vm union in vmap_area in RFC. I will consider
  reusing the union in vmap_area to save memory later. Now just take the
  simpler way to let's focus on resolving the main problem.
- Add patch 4~7 for optimization.

Baoquan He (7):
  mm/vmalloc.c: add used_map into vmap_block to track space of
    vmap_block
  mm/vmalloc.c: add flags to mark vm_map_ram area
  mm/vmalloc.c: allow vread() to read out vm_map_ram areas
  mm/vmalloc: explicitly identify vm_map_ram area when shown in
    /proc/vmcoreinfo
  mm/vmalloc: skip the uninitilized vmalloc areas
  powerpc: mm: add VM_IOREMAP flag to the vmalloc area
  sh: mm: set VM_IOREMAP flag to the vmalloc area

 arch/powerpc/kernel/pci_64.c |   2 +-
 arch/sh/kernel/cpu/sh4/sq.c  |   2 +-
 include/linux/vmalloc.h      |   1 +
 mm/vmalloc.c                 | 106 +++++++++++++++++++++++++++++------
 4 files changed, 92 insertions(+), 19 deletions(-)

-- 
2.34.1

[PATCH v2 1/7] mm/vmalloc.c: add used_map into vmap_block to track space of vmap_block

[Baoquan He]

In one vmap_block area, there could be three types of regions: region
being used which is allocated through vb_alloc(), dirty region which
is freed via vb_free() and free region. Among them, only used region
has available data. While there's no way to track those used regions
currently.

Here, add bitmap field used_map into vmap_block, and set/clear it during
allocation or freeing regions of vmap_block area.

This is a preparatoin for later use.

Signed-off-by: Baoquan He <bhe@redhat.com>
---
 mm/vmalloc.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index ccaa461998f3..5d3fd3e6fe09 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1896,6 +1896,7 @@ struct vmap_block {
 	spinlock_t lock;
 	struct vmap_area *va;
 	unsigned long free, dirty;
+	DECLARE_BITMAP(used_map, VMAP_BBMAP_BITS);
 	unsigned long dirty_min, dirty_max; /*< dirty range */
 	struct list_head free_list;
 	struct rcu_head rcu_head;
@@ -1972,10 +1973,12 @@ static void *new_vmap_block(unsigned int order, gfp_t gfp_mask)
 	vb->va = va;
 	/* At least something should be left free */
 	BUG_ON(VMAP_BBMAP_BITS <= (1UL << order));
+	bitmap_zero(vb->used_map, VMAP_BBMAP_BITS);
 	vb->free = VMAP_BBMAP_BITS - (1UL << order);
 	vb->dirty = 0;
 	vb->dirty_min = VMAP_BBMAP_BITS;
 	vb->dirty_max = 0;
+	bitmap_set(vb->used_map, 0, (1UL << order));
 	INIT_LIST_HEAD(&vb->free_list);
 
 	vb_idx = addr_to_vb_idx(va->va_start);
@@ -2081,6 +2084,7 @@ static void *vb_alloc(unsigned long size, gfp_t gfp_mask)
 		pages_off = VMAP_BBMAP_BITS - vb->free;
 		vaddr = vmap_block_vaddr(vb->va->va_start, pages_off);
 		vb->free -= 1UL << order;
+		bitmap_set(vb->used_map, pages_off, (1UL << order));
 		if (vb->free == 0) {
 			spin_lock(&vbq->lock);
 			list_del_rcu(&vb->free_list);
@@ -2114,6 +2118,9 @@ static void vb_free(unsigned long addr, unsigned long size)
 	order = get_order(size);
 	offset = (addr & (VMAP_BLOCK_SIZE - 1)) >> PAGE_SHIFT;
 	vb = xa_load(&vmap_blocks, addr_to_vb_idx(addr));
+	spin_lock(&vb->lock);
+	bitmap_clear(vb->used_map, offset, (1UL << order));
+	spin_unlock(&vb->lock);
 
 	vunmap_range_noflush(addr, addr + size);
 
-- 
2.34.1

[PATCH v2 2/7] mm/vmalloc.c: add flags to mark vm_map_ram area

[Baoquan He]

Through vmalloc API, a virtual kernel area is reserved for physical
address mapping. And vmap_area is used to track them, while vm_struct
is allocated to associate with the vmap_area to store more information
and passed out.

However, area reserved via vm_map_ram() is an exception. It doesn't have
vm_struct to associate with vmap_area. And we can't recognize the
vmap_area with '->vm == NULL' as a vm_map_ram() area because the normal
freeing path will set va->vm = NULL before unmapping, please see
function remove_vm_area().

Meanwhile, there are two types of vm_map_ram area. One is the whole
vmap_area being reserved and mapped at one time; the other is the
whole vmap_area with VMAP_BLOCK_SIZE size being reserved, while mapped
into split regions with smaller size several times via vb_alloc().

To mark the area reserved through vm_map_ram(), add flags field into
struct vmap_area. Bit 0 indicates whether it's a vm_map_ram area,
while bit 1 indicates whether it's a vmap_block type of vm_map_ram
area.

This is a preparatoin for later use.

Signed-off-by: Baoquan He <bhe@redhat.com>
---
 include/linux/vmalloc.h |  1 +
 mm/vmalloc.c            | 22 +++++++++++++++++-----
 2 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 096d48aa3437..69250efa03d1 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -76,6 +76,7 @@ struct vmap_area {
 		unsigned long subtree_max_size; /* in "free" tree */
 		struct vm_struct *vm;           /* in "busy" tree */
 	};
+	unsigned long flags; /* mark type of vm_map_ram area */
 };
 
 /* archs that select HAVE_ARCH_HUGE_VMAP should override one or more of these */
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 5d3fd3e6fe09..190f29bbaaa7 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1586,7 +1586,8 @@ preload_this_cpu_lock(spinlock_t *lock, gfp_t gfp_mask, int node)
 static struct vmap_area *alloc_vmap_area(unsigned long size,
 				unsigned long align,
 				unsigned long vstart, unsigned long vend,
-				int node, gfp_t gfp_mask)
+				int node, gfp_t gfp_mask,
+				unsigned long va_flags)
 {
 	struct vmap_area *va;
 	unsigned long freed;
@@ -1630,6 +1631,7 @@ static struct vmap_area *alloc_vmap_area(unsigned long size,
 	va->va_start = addr;
 	va->va_end = addr + size;
 	va->vm = NULL;
+	va->flags = va_flags;
 
 	spin_lock(&vmap_area_lock);
 	insert_vmap_area(va, &vmap_area_root, &vmap_area_list);
@@ -1887,6 +1889,10 @@ struct vmap_area *find_vmap_area(unsigned long addr)
 
 #define VMAP_BLOCK_SIZE		(VMAP_BBMAP_BITS * PAGE_SIZE)
 
+#define VMAP_RAM		0x1
+#define VMAP_BLOCK		0x2
+#define VMAP_FLAGS_MASK		0x3
+
 struct vmap_block_queue {
 	spinlock_t lock;
 	struct list_head free;
@@ -1962,7 +1968,8 @@ static void *new_vmap_block(unsigned int order, gfp_t gfp_mask)
 
 	va = alloc_vmap_area(VMAP_BLOCK_SIZE, VMAP_BLOCK_SIZE,
 					VMALLOC_START, VMALLOC_END,
-					node, gfp_mask);
+					node, gfp_mask,
+					VMAP_RAM|VMAP_BLOCK);
 	if (IS_ERR(va)) {
 		kfree(vb);
 		return ERR_CAST(va);
@@ -2229,8 +2236,12 @@ void vm_unmap_ram(const void *mem, unsigned int count)
 		return;
 	}
 
-	va = find_vmap_area(addr);
+	spin_lock(&vmap_area_lock);
+	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
 	BUG_ON(!va);
+	if (va)
+		va->flags &= ~VMAP_RAM;
+	spin_unlock(&vmap_area_lock);
 	debug_check_no_locks_freed((void *)va->va_start,
 				    (va->va_end - va->va_start));
 	free_unmap_vmap_area(va);
@@ -2265,7 +2276,8 @@ void *vm_map_ram(struct page **pages, unsigned int count, int node)
 	} else {
 		struct vmap_area *va;
 		va = alloc_vmap_area(size, PAGE_SIZE,
-				VMALLOC_START, VMALLOC_END, node, GFP_KERNEL);
+				VMALLOC_START, VMALLOC_END,
+				node, GFP_KERNEL, VMAP_RAM);
 		if (IS_ERR(va))
 			return NULL;
 
@@ -2505,7 +2517,7 @@ static struct vm_struct *__get_vm_area_node(unsigned long size,
 	if (!(flags & VM_NO_GUARD))
 		size += PAGE_SIZE;
 
-	va = alloc_vmap_area(size, align, start, end, node, gfp_mask);
+	va = alloc_vmap_area(size, align, start, end, node, gfp_mask, 0);
 	if (IS_ERR(va)) {
 		kfree(area);
 		return NULL;
-- 
2.34.1

[PATCH v2 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas

[Baoquan He]

Currently, vread can read out vmalloc areas which is associated with
a vm_struct. While this doesn't work for areas created by vm_map_ram()
interface because it doesn't have an associated vm_struct. Then in vread(),
these areas will be skipped.

Here, add a new function vb_vread() to read out areas managed by
vmap_block specifically. Then recognize vm_map_ram areas via vmap->flags
and handle them respectively.

Signed-off-by: Baoquan He <bhe@redhat.com>
---
 mm/vmalloc.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 59 insertions(+), 7 deletions(-)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 190f29bbaaa7..6612914459cf 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -3515,6 +3515,51 @@ static int aligned_vread(char *buf, char *addr, unsigned long count)
 	return copied;
 }
 
+static void vb_vread(char *buf, char *addr, int count)
+{
+	char *start;
+	struct vmap_block *vb;
+	unsigned long offset;
+	unsigned int rs, re, n;
+
+	vb = xa_load(&vmap_blocks, addr_to_vb_idx((unsigned long)addr));
+
+	spin_lock(&vb->lock);
+	if (bitmap_empty(vb->used_map, VMAP_BBMAP_BITS)) {
+		spin_unlock(&vb->lock);
+		memset(buf, 0, count);
+		return;
+	}
+	for_each_set_bitrange(rs, re, vb->used_map, VMAP_BBMAP_BITS) {
+		if (!count)
+			break;
+		start = vmap_block_vaddr(vb->va->va_start, rs);
+		if (addr < start) {
+			if (count == 0)
+				break;
+			*buf = '\0';
+			buf++;
+			addr++;
+			count--;
+		}
+		/*it could start reading from the middle of used region*/
+		offset = offset_in_page(addr);
+		n = (re - rs + 1) << PAGE_SHIFT - offset;
+		if (n > count)
+			n = count;
+		aligned_vread(buf, start+offset, n);
+
+		buf += n;
+		addr += n;
+		count -= n;
+	}
+	spin_unlock(&vb->lock);
+
+	/* zero-fill the left dirty or free regions */
+	if (count)
+		memset(buf, 0, count);
+}
+
 /**
  * vread() - read vmalloc area in a safe way.
  * @buf:     buffer for reading data
@@ -3545,7 +3590,7 @@ long vread(char *buf, char *addr, unsigned long count)
 	struct vm_struct *vm;
 	char *vaddr, *buf_start = buf;
 	unsigned long buflen = count;
-	unsigned long n;
+	unsigned long n, size, flags;
 
 	addr = kasan_reset_tag(addr);
 
@@ -3566,12 +3611,16 @@ long vread(char *buf, char *addr, unsigned long count)
 		if (!count)
 			break;
 
-		if (!va->vm)
+		vm = va->vm;
+		flags = va->flags & VMAP_FLAGS_MASK;
+
+		if (!vm && !flags)
 			continue;
 
-		vm = va->vm;
-		vaddr = (char *) vm->addr;
-		if (addr >= vaddr + get_vm_area_size(vm))
+		vaddr = (char *) va->va_start;
+		size = flags ? va_size(va) : get_vm_area_size(vm);
+
+		if (addr >= vaddr + size)
 			continue;
 		while (addr < vaddr) {
 			if (count == 0)
@@ -3581,10 +3630,13 @@ long vread(char *buf, char *addr, unsigned long count)
 			addr++;
 			count--;
 		}
-		n = vaddr + get_vm_area_size(vm) - addr;
+		n = vaddr + size - addr;
 		if (n > count)
 			n = count;
-		if (!(vm->flags & VM_IOREMAP))
+
+		if ((flags & (VMAP_RAM|VMAP_BLOCK)) == (VMAP_RAM|VMAP_BLOCK))
+			vb_vread(buf, addr, n);
+		else if ((flags & VMAP_RAM) || !(vm->flags & VM_IOREMAP))
 			aligned_vread(buf, addr, n);
 		else /* IOREMAP area is treated as memory hole */
 			memset(buf, 0, n);
-- 
2.34.1

[PATCH v2 4/7] mm/vmalloc: explicitly identify vm_map_ram area when shown in /proc/vmcoreinfo

[Baoquan He]

Now, by marking VMAP_RAM in vmap_area->flags for vm_map_ram, we can
clearly differentiate it with other vmalloc areas. So identify
vm_map_area area by checking VMAP_RAM of vmap_area->flags when shown
in /proc/vmcoreinfo.

Meanwhile, the code comment above vm_map_ram area checking in s_show()
is not needed any more, remove it here.

Signed-off-by: Baoquan He <bhe@redhat.com>
---
 mm/vmalloc.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 6612914459cf..3bfa872a4513 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -4182,11 +4182,7 @@ static int s_show(struct seq_file *m, void *p)
 
 	va = list_entry(p, struct vmap_area, list);
 
-	/*
-	 * s_show can encounter race with remove_vm_area, !vm on behalf
-	 * of vmap area is being tear down or vm_map_ram allocation.
-	 */
-	if (!va->vm) {
+	if (!va->vm && (va->flags & VMAP_RAM)) {
 		seq_printf(m, "0x%pK-0x%pK %7ld vm_map_ram\n",
 			(void *)va->va_start, (void *)va->va_end,
 			va->va_end - va->va_start);
-- 
2.34.1

[PATCH v2 5/7] mm/vmalloc: skip the uninitilized vmalloc areas

[Baoquan He]

For areas allocated via vmalloc_xxx() APIs, it searches for unmapped area
to reserve and allocates new pages to map into, please see function
__vmalloc_node_range(). During the process, flag VM_UNINITIALIZED is set
in vm->flags to indicate that the pages allocation and mapping haven't
been done, until clear_vm_uninitialized_flag() is called to clear it.

For this kind of area, if VM_UNINITIALIZED is still set, let's ignore
it in vread() because pages newly allocated and being mapped in that
area only contains zero data. reading them out by aligned_vread() is
wasting time.

Signed-off-by: Baoquan He <bhe@redhat.com>
---
 mm/vmalloc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 3bfa872a4513..bdaceda1b878 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -3617,6 +3617,11 @@ long vread(char *buf, char *addr, unsigned long count)
 		if (!vm && !flags)
 			continue;
 
+		if (vm->flags & VM_UNINITIALIZED)
+			continue;
+		/* Pair with smp_wmb() in clear_vm_uninitialized_flag() */
+		smp_rmb();
+
 		vaddr = (char *) va->va_start;
 		size = flags ? va_size(va) : get_vm_area_size(vm);
 
-- 
2.34.1

[PATCH v2 6/7] powerpc: mm: add VM_IOREMAP flag to the vmalloc area

[Baoquan He]

Currently, for vmalloc areas with flag VM_IOREMAP set, except of the
specific alignment clamping in __get_vm_area_node(), they will be
 1) Shown as ioremap in /proc/vmallocinfo;
 2) Ignored by /proc/kcore reading via vread()

So for the io mapping in ioremap_phb() of ppc, we should set VM_IOREMAP
in flag to make it handled correctly as above.

Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "Pali Roh??r" <pali@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
---
 arch/powerpc/kernel/pci_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 0c7cfb9fab04..fd42059ae2a5 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -132,7 +132,7 @@ void __iomem *ioremap_phb(phys_addr_t paddr, unsigned long size)
 	 * address decoding but I'd rather not deal with those outside of the
 	 * reserved 64K legacy region.
 	 */
-	area = __get_vm_area_caller(size, 0, PHB_IO_BASE, PHB_IO_END,
+	area = __get_vm_area_caller(size, VM_IOREMAP, PHB_IO_BASE, PHB_IO_END,
 				    __builtin_return_address(0));
 	if (!area)
 		return NULL;
-- 
2.34.1

[PATCH v2 7/7] sh: mm: set VM_IOREMAP flag to the vmalloc area

[Baoquan He]

Currently, for vmalloc areas with flag VM_IOREMAP set, except of the
specific alignment clamping in __get_vm_area_node(), they will be
1) Shown as ioremap in /proc/vmallocinfo;
2) Ignored by /proc/kcore reading via vread()

So for the ioremap in __sq_remap() of sh, we should set VM_IOREMAP
in flag to make it handled correctly as above.

Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-sh@vger.kernel.org
---
 arch/sh/kernel/cpu/sh4/sq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index a76b94e41e91..27f2e3da5aa2 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -103,7 +103,7 @@ static int __sq_remap(struct sq_mapping *map, pgprot_t prot)
 #if defined(CONFIG_MMU)
 	struct vm_struct *vma;
 
-	vma = __get_vm_area_caller(map->size, VM_ALLOC, map->sq_addr,
+	vma = __get_vm_area_caller(map->size, VM_IOREMAP, map->sq_addr,
 			SQ_ADDRMAX, __builtin_return_address(0));
 	if (!vma)
 		return -ENOMEM;
-- 
2.34.1

Re: [PATCH v2 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 3617 bytes --]

Hi Baoquan,

I love your patch! Perhaps something to improve:

[auto build test WARNING on akpm-mm/mm-everything]

url:    https://github.com/intel-lab-lkp/linux/commits/Baoquan-He/mm-vmalloc-c-allow-vread-to-read-out-vm_map_ram-areas/20221217-095615
base:   https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-everything
patch link:    https://lore.kernel.org/r/20221217015435.73889-4-bhe%40redhat.com
patch subject: [PATCH v2 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas
config: powerpc-randconfig-r031-20221216
compiler: clang version 16.0.0 (https://github.com/llvm/llvm-project 98b13979fb05f3ed288a900deb843e7b27589e58)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install powerpc cross compiling tool for clang build
        # apt-get install binutils-powerpc-linux-gnu
        # https://github.com/intel-lab-lkp/linux/commit/368cd65be8fedd1642e53393dc3f28ff8726122d
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Baoquan-He/mm-vmalloc-c-allow-vread-to-read-out-vm_map_ram-areas/20221217-095615
        git checkout 368cd65be8fedd1642e53393dc3f28ff8726122d
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=powerpc olddefconfig
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=powerpc SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> mm/vmalloc.c:3563:35: warning: operator '<<' has lower precedence than '-'; '-' will be evaluated first [-Wshift-op-parentheses]
                   n = (re - rs + 1) << PAGE_SHIFT - offset;
                                     ~~ ~~~~~~~~~~~^~~~~~~~
   mm/vmalloc.c:3563:35: note: place parentheses around the '-' expression to silence this warning
                   n = (re - rs + 1) << PAGE_SHIFT - offset;
                                        ~~~~~~~~~~~^~~~~~~~
   1 warning generated.


vim +3563 mm/vmalloc.c

  3533	
  3534	static void vb_vread(char *buf, char *addr, int count)
  3535	{
  3536		char *start;
  3537		struct vmap_block *vb;
  3538		unsigned long offset;
  3539		unsigned int rs, re, n;
  3540	
  3541		vb = xa_load(&vmap_blocks, addr_to_vb_idx((unsigned long)addr));
  3542	
  3543		spin_lock(&vb->lock);
  3544		if (bitmap_empty(vb->used_map, VMAP_BBMAP_BITS)) {
  3545			spin_unlock(&vb->lock);
  3546			memset(buf, 0, count);
  3547			return;
  3548		}
  3549		for_each_set_bitrange(rs, re, vb->used_map, VMAP_BBMAP_BITS) {
  3550			if (!count)
  3551				break;
  3552			start = vmap_block_vaddr(vb->va->va_start, rs);
  3553			if (addr < start) {
  3554				if (count == 0)
  3555					break;
  3556				*buf = '\0';
  3557				buf++;
  3558				addr++;
  3559				count--;
  3560			}
  3561			/*it could start reading from the middle of used region*/
  3562			offset = offset_in_page(addr);
> 3563			n = (re - rs + 1) << PAGE_SHIFT - offset;
  3564			if (n > count)
  3565				n = count;
  3566			aligned_vread(buf, start+offset, n);
  3567	
  3568			buf += n;
  3569			addr += n;
  3570			count -= n;
  3571		}
  3572		spin_unlock(&vb->lock);
  3573	
  3574		/* zero-fill the left dirty or free regions */
  3575		if (count)
  3576			memset(buf, 0, count);
  3577	}
  3578	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 148471 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 6.1.0 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="clang version 16.0.0 (git://gitmirror/llvm_project 98b13979fb05f3ed288a900deb843e7b27589e58)"
CONFIG_GCC_VERSION=0
CONFIG_CC_IS_CLANG=y
CONFIG_CLANG_VERSION=160000
CONFIG_AS_IS_LLVM=y
CONFIG_AS_VERSION=160000
CONFIG_LD_VERSION=0
CONFIG_LD_IS_LLD=y
CONFIG_LLD_VERSION=160000
CONFIG_RUST_IS_AVAILABLE=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_DOMAIN_NOMAP=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_KUNIT_TEST=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=y
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_NEED_SRCU_NMI_SAFE=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
# CONFIG_FORCE_TASKS_RUDE_RCU is not set
CONFIG_TASKS_RUDE_RCU=y
# CONFIG_FORCE_TASKS_TRACE_RCU is not set
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y
CONFIG_TASKS_TRACE_RCU_READ_MB=y
# CONFIG_RCU_LAZY is not set
# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKHEADERS=y

#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_CGROUP_FAVOR_DYNMODS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
# CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
# CONFIG_MULTIUSER is not set
CONFIG_SGETMASK_SYSCALL=y
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
CONFIG_POSIX_TIMERS=y
# CONFIG_PRINTK is not set
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
# CONFIG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# end of Kernel Performance Events And Counters

CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_PPC32=y
# CONFIG_PPC64 is not set

#
# Processor support
#
CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
CONFIG_PPC_BOOK3S_603=y
CONFIG_PPC_BOOK3S_604=y
CONFIG_POWERPC_CPU=y
# CONFIG_E300C2_CPU is not set
# CONFIG_E300C3_CPU is not set
# CONFIG_G4_CPU is not set
# CONFIG_TOOLCHAIN_DEFAULT_CPU is not set
CONFIG_TARGET_CPU_BOOL=y
CONFIG_TARGET_CPU="powerpc"
CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU_REGS=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
# CONFIG_PPC_KUEP is not set
# CONFIG_PPC_KUAP is not set
CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_PMU_SYSFS=y
CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
# end of Processor support

CONFIG_VDSO32=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_32BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_NR_IRQS=512
CONFIG_NMI_IPI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=180
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PPC_MSI_BITMAP=y

#
# Platform support
#
CONFIG_SCOM_DEBUGFS=y
CONFIG_PPC_CHRP=y
# CONFIG_PPC_MPC512x is not set
# CONFIG_PPC_MPC52xx is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC32_PSURGE=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_KVM_GUEST is not set
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_HASH_MMU_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_SMP_MUXED_IPI=y
CONFIG_MPIC=y
# CONFIG_MPIC_MSGR is not set
CONFIG_PPC_I8259=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_PPC_RTAS_DAEMON=y
CONFIG_PPC_MPC106=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
# end of CPU Frequency scaling

#
# CPUIdle driver
#

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_CPU_IDLE_GOV_MENU is not set
CONFIG_CPU_IDLE_GOV_TEO=y

#
# POWERPC CPU Idle Drivers
#
# end of POWERPC CPU Idle Drivers
# end of CPU Idle
# end of CPUIdle driver

# CONFIG_TAU is not set
# CONFIG_QE_GPIO is not set
CONFIG_GEN_RTC=y
# end of Platform support

#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_HOTPLUG_CPU=y
CONFIG_PPC_QUEUED_SPINLOCKS=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_PPC_4K_PAGES=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_PPC_PAGE_SHIFT=12
CONFIG_THREAD_SHIFT=14
CONFIG_DATA_SHIFT=22
CONFIG_ARCH_FORCE_MAX_ORDER=11
CONFIG_CMDLINE=""
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_ENERGY_MODEL=y
# CONFIG_PPC_RTAS_FILTER is not set
# end of Kernel options

CONFIG_ISA_DMA_API=y

#
# Bus options
#
# CONFIG_ISA is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_LBC=y
# end of Bus options

#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set

#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc2000000
CONFIG_PHYSICAL_START=0x02000000
CONFIG_TASK_SIZE=0xb0000000
# end of Advanced setup

CONFIG_VIRTUALIZATION=y
CONFIG_HAVE_LIVEPATCH=y

#
# General architecture-dependent options
#
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_PAGE_SIZE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=14
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_HAVE_ARCH_NVRAM_OPS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET is not set
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_HAVE_STATIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SPLIT_ARG64=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_FUNCTION_ALIGNMENT=0
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_ELF_KUNIT_TEST=y
CONFIG_ELFCORE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#

#
# SLAB allocator options
#
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB_DEPRECATED is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_COMPAT_BRK=y
CONFIG_FLATMEM=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_DEBUGFS=y
# CONFIG_CMA_SYSFS is not set
CONFIG_CMA_AREAS=7
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_USERFAULTFD=y
# CONFIG_LRU_GEN is not set

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

# CONFIG_NET is not set

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_FORCE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_PCIEAER is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEFAULT is not set
# CONFIG_PCIEASPM_POWERSAVE is not set
CONFIG_PCIEASPM_POWER_SUPERSAVE=y
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
# CONFIG_PCI_QUIRKS is not set
CONFIG_PCI_DEBUG=y
CONFIG_PCI_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_DOE=y
CONFIG_PCI_ECAM=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
# CONFIG_PCI_PASID is not set
# CONFIG_PCIE_BUS_TUNE_OFF is not set
# CONFIG_PCIE_BUS_DEFAULT is not set
# CONFIG_PCIE_BUS_SAFE is not set
CONFIG_PCIE_BUS_PERFORMANCE=y
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# PCI controller drivers
#
# CONFIG_PCI_AARDVARK is not set
CONFIG_PCIE_XILINX_NWL=y
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_TEGRA is not set
CONFIG_PCIE_RCAR_HOST=y
CONFIG_PCIE_RCAR_EP=y
CONFIG_PCI_HOST_COMMON=y
# CONFIG_PCI_HOST_GENERIC is not set
CONFIG_PCIE_XILINX=y
# CONFIG_PCIE_XILINX_CPM is not set
CONFIG_PCI_XGENE=y
# CONFIG_PCI_XGENE_MSI is not set
# CONFIG_PCI_V3_SEMI is not set
# CONFIG_PCI_VERSATILE is not set
CONFIG_PCIE_ALTERA=y
# CONFIG_PCIE_ALTERA_MSI is not set
CONFIG_PCI_HOST_THUNDER_PEM=y
# CONFIG_PCI_HOST_THUNDER_ECAM is not set
# CONFIG_PCIE_ROCKCHIP_HOST is not set
# CONFIG_PCIE_ROCKCHIP_EP is not set
CONFIG_PCIE_MEDIATEK=y
CONFIG_PCIE_MEDIATEK_GEN3=y
CONFIG_PCIE_BRCMSTB=y
# CONFIG_PCIE_MICROCHIP_HOST is not set
# CONFIG_PCIE_APPLE is not set
# CONFIG_PCIE_MT7621 is not set

#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
CONFIG_PCI_DRA7XX=y
CONFIG_PCI_DRA7XX_HOST=y
# CONFIG_PCI_DRA7XX_EP is not set
CONFIG_PCIE_DW_PLAT=y
# CONFIG_PCIE_DW_PLAT_HOST is not set
CONFIG_PCIE_DW_PLAT_EP=y
# CONFIG_PCI_EXYNOS is not set
# CONFIG_PCI_IMX6 is not set
# CONFIG_PCIE_SPEAR13XX is not set
# CONFIG_PCI_KEYSTONE_HOST is not set
# CONFIG_PCI_KEYSTONE_EP is not set
CONFIG_PCI_LAYERSCAPE=y
# CONFIG_PCI_LAYERSCAPE_EP is not set
# CONFIG_PCI_HISI is not set
# CONFIG_PCIE_QCOM is not set
CONFIG_PCIE_QCOM_EP=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCIE_ARTPEC6=y
# CONFIG_PCIE_ARTPEC6_HOST is not set
CONFIG_PCIE_ARTPEC6_EP=y
# CONFIG_PCIE_ROCKCHIP_DW_HOST is not set
# CONFIG_PCIE_INTEL_GW is not set
# CONFIG_PCIE_KEEMBAY_HOST is not set
# CONFIG_PCIE_KEEMBAY_EP is not set
CONFIG_PCIE_KIRIN=y
CONFIG_PCIE_HISI_STB=y
CONFIG_PCI_MESON=y
CONFIG_PCIE_TEGRA194=y
CONFIG_PCIE_TEGRA194_HOST=y
CONFIG_PCIE_TEGRA194_EP=y
CONFIG_PCIE_VISCONTI_HOST=y
CONFIG_PCIE_UNIPHIER=y
CONFIG_PCIE_UNIPHIER_EP=y
# CONFIG_PCIE_AL is not set
# CONFIG_PCIE_FU740 is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# CONFIG_PCIE_MOBIVEIL_PLAT is not set
# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_PLAT=y
CONFIG_PCIE_CADENCE_PLAT_HOST=y
# CONFIG_PCIE_CADENCE_PLAT_EP is not set
# CONFIG_PCI_J721E_HOST is not set
# CONFIG_PCI_J721E_EP is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
# CONFIG_PCI_ENDPOINT_CONFIGFS is not set
CONFIG_PCI_EPF_TEST=y
CONFIG_PCI_EPF_NTB=y
CONFIG_PCI_EPF_VNTB=y
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

CONFIG_CXL_BUS=y
# CONFIG_CXL_PCI is not set
CONFIG_CXL_PORT=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
# CONFIG_YENTA_RICOH is not set
CONFIG_YENTA_TI=y
# CONFIG_YENTA_ENE_TUNE is not set
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
# CONFIG_FW_LOADER_COMPRESS_XZ is not set
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SCCB=y
CONFIG_REGMAP_I3C=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_ARM_INTEGRATOR_LM=y
CONFIG_BT1_APB=y
CONFIG_BT1_AXI=y
CONFIG_HISILICON_LPC=y
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_FSL_MC_BUS is not set
CONFIG_MHI_BUS=y
# CONFIG_MHI_BUS_DEBUG is not set
CONFIG_MHI_BUS_PCI_GENERIC=y
CONFIG_MHI_BUS_EP=y
# end of Bus devices

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
CONFIG_ARM_SCMI_PROTOCOL=y
# CONFIG_ARM_SCMI_TRANSPORT_VIRTIO is not set
# CONFIG_ARM_SCMI_POWER_DOMAIN is not set
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol

# CONFIG_ARM_SCPI_POWER_DOMAIN is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_FW_CFG_SYSFS is not set
CONFIG_QCOM_SCM=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
# CONFIG_BCM47XX_NVRAM is not set
# CONFIG_TEE_BNXT_FW is not set
CONFIG_GOOGLE_FIRMWARE=y
# CONFIG_GOOGLE_COREBOOT_TABLE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=y
CONFIG_GNSS_SIRF_SERIAL=y
CONFIG_GNSS_UBX_SERIAL=y
CONFIG_GNSS_USB=y
CONFIG_MTD=y

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
# CONFIG_MTD_BCM63XX_PARTS is not set
CONFIG_MTD_BRCM_U_BOOT=y
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_OF_PARTS_BCM4908=y
CONFIG_MTD_OF_PARTS_LINKSYS_NS=y
CONFIG_MTD_PARSER_IMAGETAG=y
# CONFIG_MTD_PARSER_TPLINK_SAFELOADER is not set
CONFIG_MTD_PARSER_TRX=y
CONFIG_MTD_SHARPSL_PARTS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers

#
# User Modules And Translation Layers
#
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_SC520CDP=y
CONFIG_MTD_NETSC520=y
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_SPEAR_SMI is not set
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
# CONFIG_MTD_MTDRAM is not set

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_RAW_NAND=y

#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_AMS_DELTA=y
# CONFIG_MTD_NAND_OMAP2 is not set
CONFIG_MTD_NAND_SHARPSL=y
CONFIG_MTD_NAND_CAFE=y
# CONFIG_MTD_NAND_ATMEL is not set
CONFIG_MTD_NAND_MARVELL=y
# CONFIG_MTD_NAND_SLC_LPC32XX is not set
# CONFIG_MTD_NAND_MLC_LPC32XX is not set
CONFIG_MTD_NAND_BRCMNAND=y
CONFIG_MTD_NAND_BRCMNAND_BCM63XX=y
CONFIG_MTD_NAND_BRCMNAND_BCMA=y
CONFIG_MTD_NAND_BRCMNAND_BCMBCA=y
# CONFIG_MTD_NAND_BRCMNAND_BRCMSTB is not set
CONFIG_MTD_NAND_BRCMNAND_IPROC=y
CONFIG_MTD_NAND_BCM47XXNFLASH=y
CONFIG_MTD_NAND_OXNAS=y
CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_MTD_NAND_VF610_NFC=y
CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_NAND_SH_FLCTL=y
# CONFIG_MTD_NAND_DAVINCI is not set
CONFIG_MTD_NAND_TXX9NDFMC=y
# CONFIG_MTD_NAND_JZ4780 is not set
CONFIG_MTD_NAND_FSMC=y
CONFIG_MTD_NAND_SUNXI=y
CONFIG_MTD_NAND_HISI504=y
CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_NAND_MTK=y
CONFIG_MTD_NAND_MXIC=y
CONFIG_MTD_NAND_TEGRA=y
# CONFIG_MTD_NAND_STM32_FMC2 is not set
CONFIG_MTD_NAND_GPIO=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_CADENCE=y
CONFIG_MTD_NAND_ARASAN=y
# CONFIG_MTD_NAND_INTEL_LGM is not set
# CONFIG_MTD_NAND_RENESAS is not set

#
# Misc
#
CONFIG_MTD_SM_COMMON=y
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_RICOH=y
# CONFIG_MTD_NAND_DISKONCHIP is not set

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
# CONFIG_MTD_NAND_ECC_SW_BCH is not set
CONFIG_MTD_NAND_ECC_MXIC=y
CONFIG_MTD_NAND_ECC_MEDIATEK=y
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# end of LPDDR & LPDDR2 PCM memory drivers

# CONFIG_MTD_UBI is not set
# CONFIG_MTD_HYPERBUS is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
CONFIG_OF_ALL_DTBS=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_OF_DMA_DEFAULT_COHERENT=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y

#
# NVME Support
#
# end of NVME Support

#
# Misc devices
#
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_DUMMY_IRQ=y
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not set
CONFIG_ICS932S401=y
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_SMPRO_ERRMON is not set
# CONFIG_SMPRO_MISC is not set
CONFIG_HP_ILO=y
CONFIG_QCOM_COINCELL=y
CONFIG_QCOM_FASTRPC=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_PCH_PHUB=y
CONFIG_SRAM=y
CONFIG_DW_XDATA_PCIE=y
CONFIG_PCI_ENDPOINT_TEST=y
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_HISI_HIKEY_USB=y
# CONFIG_OPEN_DICE is not set
CONFIG_VCPU_STALL_DETECTOR=y
CONFIG_C2PORT=y

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=y
# end of EEPROM support

CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=y
CONFIG_ECHO=y
CONFIG_BCM_VK=y
# CONFIG_BCM_VK_TTY is not set
CONFIG_MISC_ALCOR_PCI=y
CONFIG_MISC_RTSX_PCI=y
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
CONFIG_UACCE=y
# CONFIG_PVPANIC is not set
CONFIG_GP_PCI1XXXX=y
# end of Misc devices

#
# SCSI device support
#
# end of SCSI device support

CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_NOSY=y
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_ADB is not set
# CONFIG_ADB_CUDA is not set
# CONFIG_ADB_PMU is not set
# CONFIG_THERM_WINDTUNNEL is not set
# CONFIG_THERM_ADT746X is not set
CONFIG_WINDFARM=y
# CONFIG_PMAC_RACKMETER is not set
# CONFIG_SENSORS_AMS is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADC is not set
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=y
CONFIG_JOYSTICK_PXRC=y
CONFIG_JOYSTICK_QWIIC=y
CONFIG_JOYSTICK_FSIA6B=y
CONFIG_JOYSTICK_SENSEHAT=y
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_PEGASUS=y
# CONFIG_TABLET_SERIAL_WACOM4 is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
CONFIG_SERIO_SUN4I_PS2=y
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LEGACY_TIOCSTI=y
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=y
# CONFIG_SERIAL_AMBA_PL010_CONSOLE is not set
CONFIG_SERIAL_MESON=y
# CONFIG_SERIAL_MESON_CONSOLE is not set
# CONFIG_SERIAL_CLPS711X is not set
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
# CONFIG_SERIAL_IMX is not set
# CONFIG_SERIAL_IMX_EARLYCON is not set
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
# CONFIG_SERIAL_SH_SCI_CONSOLE is not set
# CONFIG_SERIAL_SH_SCI_EARLYCON is not set
CONFIG_SERIAL_HS_LPC32XX=y
# CONFIG_SERIAL_HS_LPC32XX_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_PMACZILOG is not set
# CONFIG_SERIAL_CPM is not set
CONFIG_SERIAL_ICOM=y
CONFIG_SERIAL_JSM=y
# CONFIG_SERIAL_MSM is not set
# CONFIG_SERIAL_QCOM_GENI is not set
CONFIG_SERIAL_VT8500=y
# CONFIG_SERIAL_VT8500_CONSOLE is not set
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
# CONFIG_SERIAL_SIFIVE is not set
CONFIG_SERIAL_LANTIQ=y
# CONFIG_SERIAL_LANTIQ_CONSOLE is not set
# CONFIG_SERIAL_QE is not set
CONFIG_SERIAL_SCCNXP=y
# CONFIG_SERIAL_SCCNXP_CONSOLE is not set
# CONFIG_SERIAL_SC16IS7XX is not set
CONFIG_SERIAL_TIMBERDALE=y
CONFIG_SERIAL_BCM63XX=y
CONFIG_SERIAL_BCM63XX_CONSOLE=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_ALTERA_UART_CONSOLE is not set
CONFIG_SERIAL_PCH_UART=y
CONFIG_SERIAL_PCH_UART_CONSOLE=y
CONFIG_SERIAL_MXS_AUART=y
# CONFIG_SERIAL_MXS_AUART_CONSOLE is not set
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_MPS2_UART_CONSOLE=y
CONFIG_SERIAL_MPS2_UART=y
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
# CONFIG_SERIAL_MEN_Z135 is not set
CONFIG_SERIAL_STM32=y
CONFIG_SERIAL_STM32_CONSOLE=y
CONFIG_SERIAL_OWL=y
CONFIG_SERIAL_OWL_CONSOLE=y
# CONFIG_SERIAL_RDA is not set
# CONFIG_SERIAL_MILBEAUT_USIO is not set
CONFIG_SERIAL_LITEUART=y
CONFIG_SERIAL_LITEUART_MAX_PORTS=1
CONFIG_SERIAL_LITEUART_CONSOLE=y
CONFIG_SERIAL_SUNPLUS=y
CONFIG_SERIAL_SUNPLUS_CONSOLE=y
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_PPC_EPAPR_HV_BYTECHAN=y
CONFIG_PPC_EARLY_DEBUG_EHV_BC=y
CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE=0
CONFIG_GOLDFISH_TTY=y
CONFIG_GOLDFISH_TTY_EARLY_CONSOLE=y
CONFIG_NOZOMI=y
CONFIG_NULL_TTY=y
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_RTAS is not set
CONFIG_HVC_UDBG=y
# CONFIG_RPMSG_TTY is not set
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_TTY_PRINTK=y
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SSIF is not set
# CONFIG_IPMI_IPMB is not set
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=y
CONFIG_IPMI_KCS_BMC=y
CONFIG_ASPEED_KCS_IPMI_BMC=y
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_IPMI_KCS_BMC_CDEV_IPMI is not set
# CONFIG_IPMI_KCS_BMC_SERIO is not set
CONFIG_ASPEED_BT_IPMI_BMC=y
# CONFIG_SSIF_IPMI_BMC is not set
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_BA431=y
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_HW_RANDOM_IPROC_RNG200=y
# CONFIG_HW_RANDOM_IXP4XX is not set
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_HW_RANDOM_NOMADIK=y
# CONFIG_HW_RANDOM_STM32 is not set
CONFIG_HW_RANDOM_MESON=y
# CONFIG_HW_RANDOM_MTK is not set
CONFIG_HW_RANDOM_EXYNOS=y
CONFIG_HW_RANDOM_NPCM=y
# CONFIG_HW_RANDOM_KEYSTONE is not set
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
CONFIG_APPLICOM=y

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
# CONFIG_SCR24X is not set
# end of PCMCIA character devices

CONFIG_DEVMEM=y
CONFIG_NVRAM=y
# CONFIG_DEVPORT is not set
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C=y
# CONFIG_TCG_TIS_SYNQUACER is not set
CONFIG_TCG_TIS_I2C_CR50=y
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_ATMEL=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
# CONFIG_I2C_MUX_PINCTRL is not set
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support

# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_HIX5HD2 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NVIDIA_GPU=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y

#
# Mac SMBus host controller drivers
#
# CONFIG_I2C_HYDRA is not set
CONFIG_I2C_POWERMAC=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_ALTERA=y
CONFIG_I2C_ASPEED=y
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
CONFIG_I2C_BCM_IPROC=y
CONFIG_I2C_BCM_KONA=y
# CONFIG_I2C_BRCMSTB is not set
# CONFIG_I2C_CADENCE is not set
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DAVINCI=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_DIGICOLOR=y
CONFIG_I2C_EG20T=y
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
CONFIG_I2C_HIGHLANDER=y
CONFIG_I2C_HISI=y
CONFIG_I2C_IMG=y
CONFIG_I2C_IMX=y
CONFIG_I2C_IMX_LPI2C=y
CONFIG_I2C_IOP3XX=y
# CONFIG_I2C_JZ4780 is not set
CONFIG_I2C_LPC2K=y
# CONFIG_I2C_MICROCHIP_CORE is not set
CONFIG_I2C_MPC=y
CONFIG_I2C_MT65XX=y
CONFIG_I2C_MT7621=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_MXS=y
# CONFIG_I2C_NPCM is not set
CONFIG_I2C_OCORES=y
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
CONFIG_I2C_APPLE=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PNX=y
# CONFIG_I2C_PXA is not set
CONFIG_I2C_QCOM_CCI=y
CONFIG_I2C_QCOM_GENI=y
CONFIG_I2C_QUP=y
# CONFIG_I2C_RIIC is not set
# CONFIG_I2C_RZV2M is not set
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_ST=y
# CONFIG_I2C_STM32F4 is not set
CONFIG_I2C_STM32F7=y
# CONFIG_I2C_SUN6I_P2WI is not set
CONFIG_I2C_SYNQUACER=y
CONFIG_I2C_TEGRA_BPMP=y
CONFIG_I2C_UNIPHIER=y
CONFIG_I2C_UNIPHIER_F=y
# CONFIG_I2C_VERSATILE is not set
CONFIG_I2C_WMT=y
CONFIG_I2C_XILINX=y
# CONFIG_I2C_XLP9XX is not set
CONFIG_I2C_RCAR=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_DLN2=y
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PCI1XXXX is not set
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
CONFIG_I2C_VIPERBOARD=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_FSI=y
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support

CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_SLAVE_TESTUNIT is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

CONFIG_I3C=y
CONFIG_CDNS_I3C_MASTER=y
CONFIG_DW_I3C_MASTER=y
# CONFIG_SVC_I3C_MASTER is not set
CONFIG_MIPI_I3C_HCI=y
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_PARPORT=y
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_AT91PIO4=y
CONFIG_PINCTRL_BM1880=y
CONFIG_PINCTRL_CY8C95X0=y
CONFIG_PINCTRL_DA850_PUPD=y
CONFIG_PINCTRL_DA9062=y
# CONFIG_PINCTRL_EQUILIBRIUM is not set
CONFIG_PINCTRL_INGENIC=y
# CONFIG_PINCTRL_LOONGSON2 is not set
CONFIG_PINCTRL_LPC18XX=y
# CONFIG_PINCTRL_MCP23S08 is not set
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
# CONFIG_PINCTRL_OCELOT is not set
CONFIG_PINCTRL_PALMAS=y
# CONFIG_PINCTRL_PISTACHIO is not set
# CONFIG_PINCTRL_RK805 is not set
# CONFIG_PINCTRL_ROCKCHIP is not set
# CONFIG_PINCTRL_SINGLE is not set
# CONFIG_PINCTRL_STMFX is not set
# CONFIG_PINCTRL_SX150X is not set
# CONFIG_PINCTRL_OWL is not set
CONFIG_PINCTRL_ASPEED=y
CONFIG_PINCTRL_ASPEED_G4=y
CONFIG_PINCTRL_ASPEED_G5=y
# CONFIG_PINCTRL_ASPEED_G6 is not set
CONFIG_PINCTRL_BCM281XX=y
# CONFIG_PINCTRL_BCM2835 is not set
# CONFIG_PINCTRL_BCM4908 is not set
CONFIG_PINCTRL_BCM63XX=y
CONFIG_PINCTRL_BCM6318=y
CONFIG_PINCTRL_BCM6328=y
# CONFIG_PINCTRL_BCM6358 is not set
CONFIG_PINCTRL_BCM6362=y
# CONFIG_PINCTRL_BCM6368 is not set
CONFIG_PINCTRL_BCM63268=y
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
CONFIG_PINCTRL_NS=y
# CONFIG_PINCTRL_NSP_GPIO is not set
CONFIG_PINCTRL_NS2_MUX=y
# CONFIG_PINCTRL_NSP_MUX is not set
CONFIG_PINCTRL_BERLIN=y
# CONFIG_PINCTRL_AS370 is not set
CONFIG_PINCTRL_BERLIN_BG4CT=y
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L92=y
CONFIG_PINCTRL_IMX=y
# CONFIG_PINCTRL_IMX8MM is not set
CONFIG_PINCTRL_IMX8MN=y
# CONFIG_PINCTRL_IMX8MP is not set
# CONFIG_PINCTRL_IMX8MQ is not set

#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers

#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
# CONFIG_PINCTRL_MT2701 is not set
CONFIG_PINCTRL_MT7623=y
# CONFIG_PINCTRL_MT7629 is not set
CONFIG_PINCTRL_MT8135=y
CONFIG_PINCTRL_MT8127=y
CONFIG_PINCTRL_MT2712=y
# CONFIG_PINCTRL_MT6765 is not set
# CONFIG_PINCTRL_MT6779 is not set
CONFIG_PINCTRL_MT6795=y
CONFIG_PINCTRL_MT6797=y
CONFIG_PINCTRL_MT7622=y
# CONFIG_PINCTRL_MT7986 is not set
# CONFIG_PINCTRL_MT8167 is not set
# CONFIG_PINCTRL_MT8173 is not set
CONFIG_PINCTRL_MT8183=y
# CONFIG_PINCTRL_MT8186 is not set
CONFIG_PINCTRL_MT8188=y
# CONFIG_PINCTRL_MT8192 is not set
# CONFIG_PINCTRL_MT8195 is not set
CONFIG_PINCTRL_MT8365=y
# CONFIG_PINCTRL_MT8516 is not set
# CONFIG_PINCTRL_MT6397 is not set
# end of MediaTek pinctrl drivers

# CONFIG_PINCTRL_MESON is not set
CONFIG_PINCTRL_WPCM450=y
# CONFIG_PINCTRL_NPCM7XX is not set
CONFIG_PINCTRL_PXA=y
# CONFIG_PINCTRL_PXA25X is not set
CONFIG_PINCTRL_PXA27X=y
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_APQ8064=y
# CONFIG_PINCTRL_APQ8084 is not set
# CONFIG_PINCTRL_IPQ4019 is not set
CONFIG_PINCTRL_IPQ8064=y
CONFIG_PINCTRL_IPQ8074=y
CONFIG_PINCTRL_IPQ6018=y
# CONFIG_PINCTRL_MSM8226 is not set
CONFIG_PINCTRL_MSM8660=y
CONFIG_PINCTRL_MSM8960=y
CONFIG_PINCTRL_MDM9607=y
# CONFIG_PINCTRL_MDM9615 is not set
CONFIG_PINCTRL_MSM8X74=y
# CONFIG_PINCTRL_MSM8909 is not set
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_MSM8953=y
# CONFIG_PINCTRL_MSM8976 is not set
# CONFIG_PINCTRL_MSM8994 is not set
CONFIG_PINCTRL_MSM8996=y
CONFIG_PINCTRL_MSM8998=y
CONFIG_PINCTRL_QCM2290=y
CONFIG_PINCTRL_QCS404=y
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
CONFIG_PINCTRL_SC7180=y
CONFIG_PINCTRL_SC7280=y
CONFIG_PINCTRL_SC7280_LPASS_LPI=y
CONFIG_PINCTRL_SC8180X=y
CONFIG_PINCTRL_SC8280XP=y
CONFIG_PINCTRL_SDM660=y
# CONFIG_PINCTRL_SDM670 is not set
CONFIG_PINCTRL_SDM845=y
CONFIG_PINCTRL_SDX55=y
CONFIG_PINCTRL_SM6115=y
CONFIG_PINCTRL_SM6125=y
CONFIG_PINCTRL_SM6350=y
CONFIG_PINCTRL_SM6375=y
CONFIG_PINCTRL_SDX65=y
CONFIG_PINCTRL_SM8150=y
# CONFIG_PINCTRL_SM8250 is not set
CONFIG_PINCTRL_SM8250_LPASS_LPI=y
# CONFIG_PINCTRL_SM8350 is not set
CONFIG_PINCTRL_SM8450=y
CONFIG_PINCTRL_SM8450_LPASS_LPI=y
CONFIG_PINCTRL_SC8280XP_LPASS_LPI=y
CONFIG_PINCTRL_LPASS_LPI=y

#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
CONFIG_PINCTRL_PFC_EMEV2=y
# CONFIG_PINCTRL_PFC_R8A77995 is not set
CONFIG_PINCTRL_PFC_R8A7794=y
CONFIG_PINCTRL_PFC_R8A77990=y
# CONFIG_PINCTRL_PFC_R8A7779 is not set
CONFIG_PINCTRL_PFC_R8A7790=y
# CONFIG_PINCTRL_PFC_R8A77950 is not set
CONFIG_PINCTRL_PFC_R8A77951=y
CONFIG_PINCTRL_PFC_R8A7778=y
CONFIG_PINCTRL_PFC_R8A7793=y
CONFIG_PINCTRL_PFC_R8A7791=y
CONFIG_PINCTRL_PFC_R8A77965=y
CONFIG_PINCTRL_PFC_R8A77960=y
CONFIG_PINCTRL_PFC_R8A77961=y
CONFIG_PINCTRL_PFC_R8A779F0=y
# CONFIG_PINCTRL_PFC_R8A7792 is not set
CONFIG_PINCTRL_PFC_R8A77980=y
# CONFIG_PINCTRL_PFC_R8A77970 is not set
CONFIG_PINCTRL_PFC_R8A779A0=y
CONFIG_PINCTRL_PFC_R8A779G0=y
# CONFIG_PINCTRL_PFC_R8A7740 is not set
CONFIG_PINCTRL_PFC_R8A73A4=y
CONFIG_PINCTRL_RZA1=y
CONFIG_PINCTRL_RZA2=y
CONFIG_PINCTRL_RZG2L=y
CONFIG_PINCTRL_PFC_R8A77470=y
# CONFIG_PINCTRL_PFC_R8A7745 is not set
CONFIG_PINCTRL_PFC_R8A7742=y
CONFIG_PINCTRL_PFC_R8A7743=y
# CONFIG_PINCTRL_PFC_R8A7744 is not set
CONFIG_PINCTRL_PFC_R8A774C0=y
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
CONFIG_PINCTRL_PFC_R8A774B1=y
CONFIG_PINCTRL_RZN1=y
CONFIG_PINCTRL_RZV2M=y
CONFIG_PINCTRL_PFC_SH7203=y
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
CONFIG_PINCTRL_PFC_SH7720=y
# CONFIG_PINCTRL_PFC_SH7722 is not set
CONFIG_PINCTRL_PFC_SH7734=y
# CONFIG_PINCTRL_PFC_SH7757 is not set
CONFIG_PINCTRL_PFC_SH7785=y
CONFIG_PINCTRL_PFC_SH7786=y
CONFIG_PINCTRL_PFC_SH73A0=y
# CONFIG_PINCTRL_PFC_SH7723 is not set
CONFIG_PINCTRL_PFC_SH7724=y
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers

CONFIG_PINCTRL_SAMSUNG=y
CONFIG_PINCTRL_EXYNOS=y
# CONFIG_PINCTRL_EXYNOS_ARM is not set
# CONFIG_PINCTRL_EXYNOS_ARM64 is not set
CONFIG_PINCTRL_S3C24XX=y
CONFIG_PINCTRL_S3C64XX=y
CONFIG_PINCTRL_SPRD=y
CONFIG_PINCTRL_SPRD_SC9860=y
CONFIG_PINCTRL_STARFIVE_JH7100=y
CONFIG_PINCTRL_STM32=y
# CONFIG_PINCTRL_STM32F429 is not set
CONFIG_PINCTRL_STM32F469=y
CONFIG_PINCTRL_STM32F746=y
CONFIG_PINCTRL_STM32F769=y
CONFIG_PINCTRL_STM32H743=y
# CONFIG_PINCTRL_STM32MP135 is not set
CONFIG_PINCTRL_STM32MP157=y
CONFIG_PINCTRL_TI_IODELAY=y
# CONFIG_PINCTRL_UNIPHIER is not set
# CONFIG_PINCTRL_TMPV7700 is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
# CONFIG_GPIO_CDEV is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=y
CONFIG_GPIO_MAX730X=y
CONFIG_GPIO_IDIO_16=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_ASPEED=y
CONFIG_GPIO_ASPEED_SGPIO=y
CONFIG_GPIO_ATH79=y
CONFIG_GPIO_RASPBERRYPI_EXP=y
CONFIG_GPIO_BCM_KONA=y
# CONFIG_GPIO_BCM_XGS_IPROC is not set
# CONFIG_GPIO_BRCMSTB is not set
CONFIG_GPIO_CADENCE=y
# CONFIG_GPIO_CLPS711X is not set
# CONFIG_GPIO_DWAPB is not set
CONFIG_GPIO_EIC_SPRD=y
CONFIG_GPIO_EM=y
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_HISI is not set
CONFIG_GPIO_HLWD=y
# CONFIG_GPIO_IOP is not set
# CONFIG_GPIO_LOGICVC is not set
CONFIG_GPIO_LPC18XX=y
CONFIG_GPIO_LPC32XX=y
CONFIG_GPIO_MB86S7X=y
# CONFIG_GPIO_MENZ127 is not set
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
CONFIG_GPIO_MXC=y
# CONFIG_GPIO_MXS is not set
CONFIG_GPIO_PMIC_EIC_SPRD=y
# CONFIG_GPIO_PXA is not set
CONFIG_GPIO_RCAR=y
# CONFIG_GPIO_RDA is not set
CONFIG_GPIO_ROCKCHIP=y
CONFIG_GPIO_SAMA5D2_PIOBU=y
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=y
# CONFIG_GPIO_SNPS_CREG is not set
CONFIG_GPIO_SPRD=y
# CONFIG_GPIO_STP_XWAY is not set
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_TEGRA=y
# CONFIG_GPIO_TEGRA186 is not set
CONFIG_GPIO_TS4800=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_GPIO_VISCONTI=y
# CONFIG_GPIO_VX855 is not set
CONFIG_GPIO_WCD934X=y
CONFIG_GPIO_XGENE_SB=y
CONFIG_GPIO_XILINX=y
# CONFIG_GPIO_XLP is not set
# CONFIG_GPIO_AMD_FCH is not set
CONFIG_GPIO_IDT3243X=y
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADNP is not set
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
# CONFIG_GPIO_PCA9570 is not set
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DLN2=y
CONFIG_GPIO_LP3943=y
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_LP87565=y
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_PALMAS=y
# CONFIG_GPIO_SL28CPLD is not set
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TPS65086=y
# CONFIG_GPIO_TPS6586X is not set
CONFIG_GPIO_TPS65910=y
# CONFIG_GPIO_TPS65912 is not set
CONFIG_GPIO_TQMX86=y
# CONFIG_GPIO_TWL6040 is not set
# CONFIG_GPIO_WM8994 is not set
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_PCH=y
CONFIG_GPIO_PCI_IDIO_16=y
CONFIG_GPIO_PCIE_IDIO_24=y
CONFIG_GPIO_RDC321X=y
# end of PCI GPIO expanders

#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set
# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
# CONFIG_GPIO_LATCH is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
CONFIG_GPIO_SIM=y
# end of Virtual GPIO drivers

CONFIG_W1=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_MASTER_DS1WM=y
# CONFIG_W1_MASTER_GPIO is not set
# CONFIG_W1_MASTER_SGI is not set
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2405 is not set
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=y
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves

# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
CONFIG_IP5XXX_POWER=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_88PM860X=y
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_LEGO_EV3=y
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_INGENIC=y
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_DA9052 is not set
# CONFIG_BATTERY_DA9150 is not set
CONFIG_BATTERY_MAX17040=y
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_BATTERY_MAX1721X is not set
CONFIG_CHARGER_88PM860X=y
CONFIG_CHARGER_PCF50633=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_LT3651 is not set
CONFIG_CHARGER_LTC4162L=y
# CONFIG_CHARGER_MAX14577 is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_MAX77976=y
CONFIG_CHARGER_MAX8998=y
# CONFIG_CHARGER_MT6360 is not set
CONFIG_CHARGER_QCOM_SMBB=y
CONFIG_CHARGER_BQ2415X=y
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_BQ25980=y
# CONFIG_CHARGER_BQ256XX is not set
CONFIG_CHARGER_RK817=y
CONFIG_CHARGER_SMB347=y
# CONFIG_CHARGER_TPS65217 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_GOLDFISH=y
# CONFIG_BATTERY_RT5033 is not set
CONFIG_CHARGER_RT9455=y
CONFIG_CHARGER_SC2731=y
# CONFIG_FUEL_GAUGE_SC27XX is not set
# CONFIG_CHARGER_UCS1002 is not set
CONFIG_CHARGER_BD99954=y
CONFIG_BATTERY_ACER_A500=y
CONFIG_BATTERY_UG3105=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=y
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM1177=y
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7410=y
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_AHT10=y
CONFIG_SENSORS_AQUACOMPUTER_D5NEXT=y
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_AXI_FAN_CONTROL=y
CONFIG_SENSORS_ARM_SCMI=y
CONFIG_SENSORS_ASB100=y
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_BT1_PVT=y
CONFIG_SENSORS_BT1_PVT_ALARMS=y
# CONFIG_SENSORS_CORSAIR_CPRO is not set
CONFIG_SENSORS_CORSAIR_PSU=y
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_SPARX5 is not set
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_GSC=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LAN966X=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LTC2945=y
# CONFIG_SENSORS_LTC2947_I2C is not set
CONFIG_SENSORS_LTC2990=y
# CONFIG_SENSORS_LTC2992 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_MAX127=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
CONFIG_SENSORS_MAX6620=y
CONFIG_SENSORS_MAX6621=y
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_MLXREG_FAN=y
CONFIG_SENSORS_TC654=y
CONFIG_SENSORS_TPS23861=y
CONFIG_SENSORS_MENF21BMC_HWMON=y
CONFIG_SENSORS_MR75203=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6775_CORE=y
CONFIG_SENSORS_NCT6775_I2C=y
CONFIG_SENSORS_NCT7802=y
# CONFIG_SENSORS_NPCM7XX is not set
CONFIG_SENSORS_NSA320=y
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
CONFIG_SENSORS_NZXT_SMART2=y
CONFIG_SENSORS_OCC_P8_I2C=y
CONFIG_SENSORS_OCC_P9_SBE=y
CONFIG_SENSORS_OCC=y
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_PECI_CPUTEMP=y
# CONFIG_SENSORS_PECI_DIMMTEMP is not set
CONFIG_SENSORS_PECI=y
# CONFIG_PMBUS is not set
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_RASPBERRYPI_HWMON=y
CONFIG_SENSORS_SL28CPLD=y
CONFIG_SENSORS_SBTSI=y
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SHT3x=y
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SY7636A=y
CONFIG_SENSORS_EMC1403=y
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC2305=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_STTS751=y
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=y
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83773G=y
CONFIG_SENSORS_W83781D=y
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_MIPS=y
CONFIG_BCMA_PFLASH=y
CONFIG_BCMA_NFLASH=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
# CONFIG_MFD_SUN4I_GPADC is not set
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_AT91_USART=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_ATMEL_SMC=y
CONFIG_MFD_BCM590XX=y
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
# CONFIG_MFD_CS47L15 is not set
# CONFIG_MFD_CS47L35 is not set
CONFIG_MFD_CS47L85=y
# CONFIG_MFD_CS47L90 is not set
CONFIG_MFD_CS47L92=y
CONFIG_MFD_ASIC3=y
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
CONFIG_MFD_DA9062=y
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
CONFIG_MFD_ENE_KB3930=y
# CONFIG_MFD_EXYNOS_LPASS is not set
CONFIG_MFD_GATEWORKS_GSC=y
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
CONFIG_MFD_MXS_LRADC=y
CONFIG_MFD_MX25_TSADC=y
CONFIG_MFD_HI6421_PMIC=y
# CONFIG_MFD_HI655X_PMIC is not set
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_MFD_IQS62X=y
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77714 is not set
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6360=y
# CONFIG_MFD_MT6370 is not set
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
CONFIG_MFD_VIPERBOARD=y
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_MFD_PM8XXX=y
CONFIG_MFD_SY7636A=y
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RT4831=y
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RT5120=y
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_RK808=y
# CONFIG_MFD_RN5T618 is not set
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=y
# CONFIG_MFD_SL28CPLD is not set
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
CONFIG_ABX500_CORE=y
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
# CONFIG_STMPE_I2C is not set
# end of STMicroelectronics STMPE Interface Drivers

CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
# CONFIG_MFD_TPS65218 is not set
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=y
# CONFIG_MFD_LOCHNAGAR is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_CS47L24=y
# CONFIG_MFD_WM5102 is not set
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
# CONFIG_MFD_STW481X is not set
CONFIG_MFD_ROHM_BD718XX=y
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STM32_LPTIMER is not set
CONFIG_MFD_STM32_TIMERS=y
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
CONFIG_MFD_WCD934X=y
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_KHADAS_MCU is not set
CONFIG_MFD_ACER_A500_EC=y
CONFIG_MFD_QCOM_PM8008=y
CONFIG_RAVE_SP_CORE=y
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers

CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_88PM800=y
# CONFIG_REGULATOR_88PM8607 is not set
# CONFIG_REGULATOR_ACT8865 is not set
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=y
# CONFIG_REGULATOR_ARM_SCMI is not set
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
# CONFIG_REGULATOR_BCM590XX is not set
# CONFIG_REGULATOR_BD718XX is not set
CONFIG_REGULATOR_DA9052=y
# CONFIG_REGULATOR_DA9062 is not set
# CONFIG_REGULATOR_DA9121 is not set
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
# CONFIG_REGULATOR_FAN53880 is not set
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_HI6421V530=y
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP873X is not set
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP87565=y
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_MAX77650=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8893 is not set
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8997 is not set
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_MAX20086=y
# CONFIG_REGULATOR_MAX77686 is not set
# CONFIG_REGULATOR_MAX77693 is not set
# CONFIG_REGULATOR_MAX77802 is not set
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MCP16502=y
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
# CONFIG_REGULATOR_MP886X is not set
CONFIG_REGULATOR_MPQ7920=y
# CONFIG_REGULATOR_MT6311 is not set
CONFIG_REGULATOR_MT6323=y
# CONFIG_REGULATOR_MT6331 is not set
CONFIG_REGULATOR_MT6332=y
# CONFIG_REGULATOR_MT6357 is not set
# CONFIG_REGULATOR_MT6358 is not set
# CONFIG_REGULATOR_MT6359 is not set
CONFIG_REGULATOR_MT6360=y
# CONFIG_REGULATOR_MT6397 is not set
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=y
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_QCOM_RPMH is not set
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_QCOM_USB_VBUS=y
# CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY is not set
# CONFIG_REGULATOR_RK808 is not set
# CONFIG_REGULATOR_RT4801 is not set
CONFIG_REGULATOR_RT4831=y
CONFIG_REGULATOR_RT5120=y
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
CONFIG_REGULATOR_RT6160=y
# CONFIG_REGULATOR_RT6190 is not set
CONFIG_REGULATOR_RT6245=y
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
# CONFIG_REGULATOR_RTQ6752 is not set
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
# CONFIG_REGULATOR_S5M8767 is not set
CONFIG_REGULATOR_SC2731=y
# CONFIG_REGULATOR_SLG51000 is not set
# CONFIG_REGULATOR_STM32_BOOSTER is not set
CONFIG_REGULATOR_STM32_VREFBUF=y
CONFIG_REGULATOR_STM32_PWR=y
# CONFIG_REGULATOR_STPMIC1 is not set
# CONFIG_REGULATOR_TI_ABB is not set
CONFIG_REGULATOR_STW481X_VMMC=y
CONFIG_REGULATOR_SY7636A=y
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=y
# CONFIG_REGULATOR_SY8827N is not set
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS6286X=y
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65086=y
# CONFIG_REGULATOR_TPS65132 is not set
CONFIG_REGULATOR_TPS65217=y
# CONFIG_REGULATOR_TPS6586X is not set
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TPS68470=y
# CONFIG_REGULATOR_UNIPHIER is not set
# CONFIG_REGULATOR_VCTRL is not set
CONFIG_REGULATOR_WM8994=y
CONFIG_REGULATOR_QCOM_LABIBB=y
CONFIG_RC_CORE=y
# CONFIG_BPF_LIRC_MODE2 is not set
CONFIG_LIRC=y
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
# CONFIG_IR_RC6_DECODER is not set
CONFIG_IR_RCMM_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
# CONFIG_IR_SONY_DECODER is not set
CONFIG_IR_XMP_DECODER=y
# CONFIG_RC_DEVICES is not set
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y

#
# CEC support
#
# CONFIG_MEDIA_CEC_RC is not set
CONFIG_CEC_PIN_ERROR_INJ=y
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_CEC_MESON_AO is not set
CONFIG_CEC_GPIO=y
# CONFIG_CEC_SAMSUNG_S5P is not set
CONFIG_CEC_STI=y
CONFIG_CEC_STM32=y
CONFIG_CEC_TEGRA=y
CONFIG_USB_PULSE8_CEC=y
CONFIG_USB_RAINSHADOW_CEC=y
# end of CEC support

CONFIG_MEDIA_SUPPORT=y
# CONFIG_MEDIA_SUPPORT_FILTER is not set
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types

#
# Media core support
#
CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=y
# end of Media core support

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=y
CONFIG_V4L2_JPEG_HELPER=y
CONFIG_V4L2_H264=y
CONFIG_V4L2_VP9=y
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_V4L2_FLASH_LED_CLASS=y
CONFIG_V4L2_FWNODE=y
CONFIG_V4L2_ASYNC=y
# end of Video4Linux options

#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
# end of Media controller options

#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options

#
# Media drivers
#

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_GSPCA=y
# CONFIG_USB_GSPCA_BENQ is not set
CONFIG_USB_GSPCA_CONEX=y
CONFIG_USB_GSPCA_CPIA1=y
CONFIG_USB_GSPCA_DTCS033=y
CONFIG_USB_GSPCA_ETOMS=y
# CONFIG_USB_GSPCA_FINEPIX is not set
CONFIG_USB_GSPCA_JEILINJ=y
CONFIG_USB_GSPCA_JL2005BCD=y
CONFIG_USB_GSPCA_KINECT=y
CONFIG_USB_GSPCA_KONICA=y
CONFIG_USB_GSPCA_MARS=y
CONFIG_USB_GSPCA_MR97310A=y
CONFIG_USB_GSPCA_NW80X=y
CONFIG_USB_GSPCA_OV519=y
CONFIG_USB_GSPCA_OV534=y
CONFIG_USB_GSPCA_OV534_9=y
CONFIG_USB_GSPCA_PAC207=y
CONFIG_USB_GSPCA_PAC7302=y
# CONFIG_USB_GSPCA_PAC7311 is not set
CONFIG_USB_GSPCA_SE401=y
CONFIG_USB_GSPCA_SN9C2028=y
CONFIG_USB_GSPCA_SN9C20X=y
CONFIG_USB_GSPCA_SONIXB=y
# CONFIG_USB_GSPCA_SONIXJ is not set
CONFIG_USB_GSPCA_SPCA1528=y
CONFIG_USB_GSPCA_SPCA500=y
# CONFIG_USB_GSPCA_SPCA501 is not set
CONFIG_USB_GSPCA_SPCA505=y
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
CONFIG_USB_GSPCA_SQ905C=y
CONFIG_USB_GSPCA_SQ930X=y
CONFIG_USB_GSPCA_STK014=y
CONFIG_USB_GSPCA_STK1135=y
CONFIG_USB_GSPCA_STV0680=y
CONFIG_USB_GSPCA_SUNPLUS=y
CONFIG_USB_GSPCA_T613=y
# CONFIG_USB_GSPCA_TOPRO is not set
# CONFIG_USB_GSPCA_TOUPTEK is not set
# CONFIG_USB_GSPCA_TV8532 is not set
CONFIG_USB_GSPCA_VC032X=y
CONFIG_USB_GSPCA_VICAM=y
CONFIG_USB_GSPCA_XIRLINK_CIT=y
# CONFIG_USB_GSPCA_ZC3XX is not set
CONFIG_USB_GL860=y
CONFIG_USB_M5602=y
CONFIG_USB_STV06XX=y
CONFIG_USB_PWC=y
CONFIG_USB_PWC_DEBUG=y
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_S2255=y
# CONFIG_USB_VIDEO_CLASS is not set

#
# Analog TV USB devices
#
CONFIG_VIDEO_HDPVR=y
CONFIG_VIDEO_PVRUSB2=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DVB is not set
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
# CONFIG_VIDEO_STK1160_COMMON is not set

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=y
# CONFIG_VIDEO_AU0828_V4L2 is not set
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=y
# CONFIG_VIDEO_CX231XX_RC is not set
CONFIG_VIDEO_CX231XX_DVB=y

#
# Digital TV USB devices
#
CONFIG_DVB_AS102=y
CONFIG_DVB_B2C2_FLEXCOP_USB=y
CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y
CONFIG_DVB_USB_V2=y
# CONFIG_DVB_USB_AF9015 is not set
CONFIG_DVB_USB_AF9035=y
CONFIG_DVB_USB_ANYSEE=y
CONFIG_DVB_USB_AU6610=y
CONFIG_DVB_USB_AZ6007=y
CONFIG_DVB_USB_CE6230=y
# CONFIG_DVB_USB_DVBSKY is not set
CONFIG_DVB_USB_EC168=y
CONFIG_DVB_USB_GL861=y
# CONFIG_DVB_USB_LME2510 is not set
CONFIG_DVB_USB_MXL111SF=y
CONFIG_DVB_USB_RTL28XXU=y
# CONFIG_DVB_USB_ZD1301 is not set
# CONFIG_DVB_USB is not set
# CONFIG_SMS_USB_DRV is not set
CONFIG_DVB_TTUSB_BUDGET=y
CONFIG_DVB_TTUSB_DEC=y

#
# Webcam, TV (analog/digital) USB devices
#
# CONFIG_VIDEO_EM28XX is not set

#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=y
# CONFIG_USB_HACKRF is not set
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_STA2X11_VIP is not set
CONFIG_VIDEO_TW5864=y
CONFIG_VIDEO_TW68=y
CONFIG_VIDEO_ZORAN=y
CONFIG_VIDEO_ZORAN_DC30=y
CONFIG_VIDEO_ZORAN_ZR36060=y
CONFIG_VIDEO_ZORAN_BUZ=y
CONFIG_VIDEO_ZORAN_DC10=y
CONFIG_VIDEO_ZORAN_LML33=y
# CONFIG_VIDEO_ZORAN_LML33R10 is not set
# CONFIG_VIDEO_ZORAN_AVS6EYES is not set

#
# Media capture/analog TV support
#
# CONFIG_VIDEO_DT3155 is not set
# CONFIG_VIDEO_IVTV is not set

#
# Media capture/analog/hybrid TV support
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CX18 is not set
CONFIG_VIDEO_CX25821=y
CONFIG_VIDEO_CX88=y
# CONFIG_VIDEO_CX88_BLACKBIRD is not set
CONFIG_VIDEO_CX88_DVB=y
# CONFIG_VIDEO_CX88_ENABLE_VP3054 is not set
CONFIG_VIDEO_CX88_MPEG=y
# CONFIG_VIDEO_SAA7134 is not set
CONFIG_VIDEO_SAA7164=y

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_B2C2_FLEXCOP_PCI=y
CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG=y
CONFIG_DVB_DDBRIDGE=y
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
# CONFIG_DVB_DM1105 is not set
# CONFIG_MANTIS_CORE is not set
# CONFIG_DVB_NGENE is not set
CONFIG_DVB_PLUTO2=y
CONFIG_DVB_PT1=y
CONFIG_DVB_PT3=y
CONFIG_DVB_SMIPCIE=y
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SAA7706H is not set
CONFIG_RADIO_SHARK=y
CONFIG_RADIO_SHARK2=y
CONFIG_RADIO_SI4713=y
CONFIG_RADIO_TEA575X=y
CONFIG_RADIO_TEA5764=y
# CONFIG_RADIO_TEA5764_XTAL is not set
CONFIG_RADIO_TEF6862=y
CONFIG_RADIO_WL1273=y
# CONFIG_USB_DSBR is not set
# CONFIG_USB_KEENE is not set
CONFIG_USB_MA901=y
CONFIG_USB_MR800=y
CONFIG_USB_RAREMONO=y
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=y
CONFIG_I2C_SI470X=y
CONFIG_USB_SI4713=y
CONFIG_PLATFORM_SI4713=y
CONFIG_I2C_SI4713=y
# CONFIG_V4L_RADIO_ISA_DRIVERS is not set
CONFIG_MEDIA_PLATFORM_DRIVERS=y
# CONFIG_V4L_PLATFORM_DRIVERS is not set
CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_DVB_PLATFORM_DRIVERS=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set

#
# Allegro DVT media platform drivers
#
CONFIG_VIDEO_ALLEGRO_DVT=y

#
# Amlogic media platform drivers
#
# CONFIG_VIDEO_MESON_GE2D is not set

#
# Amphion drivers
#

#
# Aspeed media platform drivers
#

#
# Atmel media platform drivers
#

#
# Cadence media platform drivers
#
# CONFIG_VIDEO_CADENCE_CSI2RX is not set
CONFIG_VIDEO_CADENCE_CSI2TX=y

#
# Chips&Media media platform drivers
#
CONFIG_VIDEO_CODA=y
CONFIG_VIDEO_IMX_VDOA=y

#
# Intel media platform drivers
#

#
# Marvell media platform drivers
#

#
# Mediatek media platform drivers
#
CONFIG_VIDEO_MEDIATEK_JPEG=y
CONFIG_VIDEO_MEDIATEK_MDP=y
CONFIG_VIDEO_MEDIATEK_VCODEC_VPU=y
CONFIG_VIDEO_MEDIATEK_VCODEC=y
CONFIG_VIDEO_MEDIATEK_VPU=y

#
# Microchip Technology, Inc. media platform drivers
#

#
# NVidia media platform drivers
#
CONFIG_VIDEO_TEGRA_VDE=y

#
# NXP media platform drivers
#
# CONFIG_VIDEO_IMX7_CSI is not set
CONFIG_VIDEO_IMX_MIPI_CSIS=y
CONFIG_VIDEO_IMX_PXP=y
CONFIG_VIDEO_MX2_EMMAPRP=y
# CONFIG_VIDEO_DW100 is not set
CONFIG_VIDEO_IMX8_JPEG=y

#
# Qualcomm media platform drivers
#

#
# Renesas media platform drivers
#
CONFIG_VIDEO_RENESAS_FCP=y
CONFIG_VIDEO_RENESAS_FDP1=y
# CONFIG_VIDEO_RENESAS_JPU is not set
# CONFIG_VIDEO_RENESAS_VSP1 is not set
CONFIG_VIDEO_RCAR_DRIF=y

#
# Rockchip media platform drivers
#
# CONFIG_VIDEO_ROCKCHIP_RGA is not set

#
# Samsung media platform drivers
#
# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set
CONFIG_VIDEO_SAMSUNG_S5P_G2D=y
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=y
CONFIG_VIDEO_SAMSUNG_S5P_MFC=y

#
# STMicroelectronics media platform drivers
#
# CONFIG_VIDEO_STI_BDISP is not set
CONFIG_DVB_C8SECTPFE=y
# CONFIG_VIDEO_STI_DELTA is not set
CONFIG_VIDEO_STI_HVA=y
CONFIG_VIDEO_STI_HVA_DEBUGFS=y
# CONFIG_VIDEO_STM32_DMA2D is not set

#
# Sunxi media platform drivers
#

#
# Texas Instruments drivers
#
CONFIG_VIDEO_TI_VPDMA=y
CONFIG_VIDEO_TI_SC=y
CONFIG_VIDEO_TI_CSC=y
CONFIG_VIDEO_TI_VPE=y
CONFIG_VIDEO_TI_VPE_DEBUG=y

#
# Verisilicon media platform drivers
#
CONFIG_VIDEO_HANTRO=y
CONFIG_VIDEO_HANTRO_IMX8M=y
# CONFIG_VIDEO_HANTRO_SAMA5D4 is not set
CONFIG_VIDEO_HANTRO_ROCKCHIP=y
# CONFIG_VIDEO_HANTRO_SUNXI is not set

#
# VIA media platform drivers
#

#
# Xilinx media platform drivers
#
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_TEST_DRIVERS is not set

#
# FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
CONFIG_CYPRESS_FIRMWARE=y
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_DVB_B2C2_FLEXCOP=y
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=y
CONFIG_VIDEOBUF2_DVB=y
# end of Media drivers

#
# Media ancillary drivers
#
# CONFIG_VIDEO_IR_I2C is not set

#
# Camera sensor devices
#
CONFIG_VIDEO_AR0521=y
CONFIG_VIDEO_HI556=y
# CONFIG_VIDEO_HI846 is not set
CONFIG_VIDEO_HI847=y
CONFIG_VIDEO_IMX208=y
CONFIG_VIDEO_IMX214=y
CONFIG_VIDEO_IMX219=y
CONFIG_VIDEO_IMX258=y
CONFIG_VIDEO_IMX274=y
# CONFIG_VIDEO_IMX290 is not set
CONFIG_VIDEO_IMX319=y
CONFIG_VIDEO_IMX334=y
CONFIG_VIDEO_IMX335=y
CONFIG_VIDEO_IMX355=y
# CONFIG_VIDEO_IMX412 is not set
CONFIG_VIDEO_MAX9271_LIB=y
CONFIG_VIDEO_MT9M001=y
# CONFIG_VIDEO_MT9M032 is not set
CONFIG_VIDEO_MT9M111=y
# CONFIG_VIDEO_MT9P031 is not set
CONFIG_VIDEO_MT9T001=y
CONFIG_VIDEO_MT9T112=y
CONFIG_VIDEO_MT9V011=y
CONFIG_VIDEO_MT9V032=y
CONFIG_VIDEO_MT9V111=y
CONFIG_VIDEO_NOON010PC30=y
CONFIG_VIDEO_OG01A1B=y
# CONFIG_VIDEO_OV02A10 is not set
# CONFIG_VIDEO_OV08D10 is not set
# CONFIG_VIDEO_OV08X40 is not set
# CONFIG_VIDEO_OV13858 is not set
CONFIG_VIDEO_OV13B10=y
CONFIG_VIDEO_OV2640=y
CONFIG_VIDEO_OV2659=y
# CONFIG_VIDEO_OV2680 is not set
CONFIG_VIDEO_OV2685=y
CONFIG_VIDEO_OV2740=y
# CONFIG_VIDEO_OV4689 is not set
CONFIG_VIDEO_OV5640=y
CONFIG_VIDEO_OV5645=y
CONFIG_VIDEO_OV5647=y
# CONFIG_VIDEO_OV5648 is not set
# CONFIG_VIDEO_OV5670 is not set
# CONFIG_VIDEO_OV5675 is not set
CONFIG_VIDEO_OV5693=y
CONFIG_VIDEO_OV5695=y
CONFIG_VIDEO_OV6650=y
CONFIG_VIDEO_OV7251=y
CONFIG_VIDEO_OV7640=y
CONFIG_VIDEO_OV7670=y
# CONFIG_VIDEO_OV772X is not set
CONFIG_VIDEO_OV7740=y
# CONFIG_VIDEO_OV8856 is not set
CONFIG_VIDEO_OV8865=y
CONFIG_VIDEO_OV9282=y
CONFIG_VIDEO_OV9640=y
# CONFIG_VIDEO_OV9650 is not set
CONFIG_VIDEO_OV9734=y
CONFIG_VIDEO_RDACM20=y
CONFIG_VIDEO_RDACM21=y
CONFIG_VIDEO_RJ54N1=y
# CONFIG_VIDEO_S5K5BAF is not set
CONFIG_VIDEO_S5K6A3=y
CONFIG_VIDEO_S5K6AA=y
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_ST_VGXY61 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_ET8EK8 is not set
CONFIG_VIDEO_M5MOLS=y
# end of Camera sensor devices

#
# Lens drivers
#
CONFIG_VIDEO_AD5820=y
CONFIG_VIDEO_AK7375=y
# CONFIG_VIDEO_DW9714 is not set
# CONFIG_VIDEO_DW9768 is not set
CONFIG_VIDEO_DW9807_VCM=y
# end of Lens drivers

#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
# end of Flash devices

#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_CS3308 is not set
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_MSP3400=y
# CONFIG_VIDEO_SONY_BTF_MPX is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
CONFIG_VIDEO_TEA6420=y
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_UDA1342=y
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_WM8775=y
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y
# end of RDS decoders

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=y
CONFIG_VIDEO_ADV7183=y
CONFIG_VIDEO_ADV748X=y
CONFIG_VIDEO_ADV7604=y
# CONFIG_VIDEO_ADV7604_CEC is not set
CONFIG_VIDEO_ADV7842=y
CONFIG_VIDEO_ADV7842_CEC=y
CONFIG_VIDEO_BT819=y
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
# CONFIG_VIDEO_ISL7998X is not set
# CONFIG_VIDEO_KS0127 is not set
CONFIG_VIDEO_MAX9286=y
CONFIG_VIDEO_ML86V7667=y
CONFIG_VIDEO_SAA7110=y
CONFIG_VIDEO_SAA711X=y
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TC358746 is not set
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=y
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
CONFIG_VIDEO_TW9903=y
CONFIG_VIDEO_TW9906=y
CONFIG_VIDEO_TW9910=y
CONFIG_VIDEO_VPX3220=y

#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
CONFIG_VIDEO_CX25840=y
# end of Video decoders

#
# Video encoders
#
CONFIG_VIDEO_AD9389B=y
CONFIG_VIDEO_ADV7170=y
CONFIG_VIDEO_ADV7175=y
# CONFIG_VIDEO_ADV7343 is not set
CONFIG_VIDEO_ADV7393=y
CONFIG_VIDEO_ADV7511=y
CONFIG_VIDEO_ADV7511_CEC=y
# CONFIG_VIDEO_AK881X is not set
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_SAA7185=y
CONFIG_VIDEO_THS8200=y
# end of Video encoders

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y
# end of Audio/Video compression chips

#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=y
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_I2C=y
CONFIG_VIDEO_M52790=y
# CONFIG_VIDEO_ST_MIPID02 is not set
# CONFIG_VIDEO_THS7303 is not set
# end of Miscellaneous helper chips

CONFIG_MEDIA_TUNER=y

#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_E4000 is not set
# CONFIG_MEDIA_TUNER_FC0011 is not set
# CONFIG_MEDIA_TUNER_FC0012 is not set
CONFIG_MEDIA_TUNER_FC0013=y
CONFIG_MEDIA_TUNER_FC2580=y
# CONFIG_MEDIA_TUNER_IT913X is not set
CONFIG_MEDIA_TUNER_M88RS6000T=y
CONFIG_MEDIA_TUNER_MAX2165=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_MT2266=y
# CONFIG_MEDIA_TUNER_MXL301RF is not set
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_MEDIA_TUNER_MXL5007T=y
# CONFIG_MEDIA_TUNER_QM1D1B0004 is not set
CONFIG_MEDIA_TUNER_QM1D1C0042=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_R820T=y
CONFIG_MEDIA_TUNER_SI2157=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_TDA18250=y
# CONFIG_MEDIA_TUNER_TDA18271 is not set
# CONFIG_MEDIA_TUNER_TDA827X is not set
# CONFIG_MEDIA_TUNER_TDA8290 is not set
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
# CONFIG_MEDIA_TUNER_TEA5767 is not set
CONFIG_MEDIA_TUNER_TUA9001=y
CONFIG_MEDIA_TUNER_XC2028=y
# CONFIG_MEDIA_TUNER_XC4000 is not set
CONFIG_MEDIA_TUNER_XC5000=y
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_M88DS3103 is not set
CONFIG_DVB_MXL5XX=y
CONFIG_DVB_STB0899=y
CONFIG_DVB_STB6100=y
# CONFIG_DVB_STV090x is not set
# CONFIG_DVB_STV0910 is not set
# CONFIG_DVB_STV6110x is not set
CONFIG_DVB_STV6111=y

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
CONFIG_DVB_MN88472=y
CONFIG_DVB_MN88473=y
# CONFIG_DVB_SI2165 is not set
CONFIG_DVB_TDA18271C2DD=y

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24116 is not set
CONFIG_DVB_CX24117=y
CONFIG_DVB_CX24120=y
CONFIG_DVB_CX24123=y
CONFIG_DVB_DS3000=y
CONFIG_DVB_MB86A16=y
CONFIG_DVB_MT312=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_SI21XX=y
# CONFIG_DVB_STB6000 is not set
CONFIG_DVB_STV0288=y
# CONFIG_DVB_STV0299 is not set
CONFIG_DVB_STV0900=y
CONFIG_DVB_STV6110=y
# CONFIG_DVB_TDA10071 is not set
CONFIG_DVB_TDA10086=y
CONFIG_DVB_TDA8083=y
# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TS2020 is not set
CONFIG_DVB_TUA6100=y
# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
# CONFIG_DVB_VES1X93 is not set
CONFIG_DVB_ZL10036=y
# CONFIG_DVB_ZL10039 is not set

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=y
CONFIG_DVB_AS102_FE=y
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_CXD2820R is not set
# CONFIG_DVB_CXD2841ER is not set
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=y
# CONFIG_DVB_DIB7000M is not set
CONFIG_DVB_DIB7000P=y
# CONFIG_DVB_DIB9000 is not set
CONFIG_DVB_DRXD=y
CONFIG_DVB_EC100=y
CONFIG_DVB_L64781=y
CONFIG_DVB_MT352=y
CONFIG_DVB_NXT6000=y
CONFIG_DVB_RTL2830=y
CONFIG_DVB_RTL2832=y
# CONFIG_DVB_RTL2832_SDR is not set
CONFIG_DVB_S5H1432=y
CONFIG_DVB_SI2168=y
# CONFIG_DVB_SP887X is not set
CONFIG_DVB_STV0367=y
# CONFIG_DVB_TDA10048 is not set
CONFIG_DVB_TDA1004X=y
CONFIG_DVB_ZD1301_DEMOD=y
CONFIG_DVB_ZL10353=y

#
# DVB-C (cable) frontends
#
# CONFIG_DVB_STV0297 is not set
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=y
# CONFIG_DVB_VES1820 is not set

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
# CONFIG_DVB_AU8522_V4L is not set
CONFIG_DVB_BCM3510=y
# CONFIG_DVB_LG2160 is not set
CONFIG_DVB_LGDT3305=y
# CONFIG_DVB_LGDT3306A is not set
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_MXL692=y
CONFIG_DVB_NXT200X=y
CONFIG_DVB_OR51132=y
# CONFIG_DVB_OR51211 is not set
CONFIG_DVB_S5H1409=y
CONFIG_DVB_S5H1411=y

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=y
# CONFIG_DVB_MB86A20S is not set
CONFIG_DVB_S921=y

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MN88443X=y
CONFIG_DVB_TC90522=y

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
CONFIG_DVB_TUNER_DIB0070=y
CONFIG_DVB_TUNER_DIB0090=y

#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=y
CONFIG_DVB_AF9033=y
# CONFIG_DVB_ASCOT2E is not set
# CONFIG_DVB_ATBM8830 is not set
CONFIG_DVB_HELENE=y
CONFIG_DVB_HORUS3A=y
# CONFIG_DVB_ISL6405 is not set
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
CONFIG_DVB_IX2505V=y
CONFIG_DVB_LGS8GL5=y
CONFIG_DVB_LGS8GXX=y
CONFIG_DVB_LNBH25=y
CONFIG_DVB_LNBH29=y
CONFIG_DVB_LNBP21=y
CONFIG_DVB_LNBP22=y
# CONFIG_DVB_M88RS2000 is not set
CONFIG_DVB_TDA665x=y
# CONFIG_DVB_DRX39XYJ is not set

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=y
CONFIG_DVB_SP2=y
# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_UNINORTH is not set
CONFIG_IMX_IPUV3_CORE=y
# CONFIG_DRM is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set

#
# ARM devices
#
# end of ARM devices

#
# Frame buffer Devices
#
# CONFIG_FB is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
CONFIG_BACKLIGHT_OMAP1=y
CONFIG_BACKLIGHT_DA9052=y
CONFIG_BACKLIGHT_QCOM_WLED=y
# CONFIG_BACKLIGHT_RT4831 is not set
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_PCF50633=y
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3639=y
# CONFIG_BACKLIGHT_TPS65217 is not set
# CONFIG_BACKLIGHT_AS3711 is not set
CONFIG_BACKLIGHT_GPIO=y
# CONFIG_BACKLIGHT_LV5207LP is not set
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_BACKLIGHT_RAVE_SP=y
# CONFIG_BACKLIGHT_LED is not set
# end of Backlight & LCD device support

CONFIG_HDMI=y
# end of Graphics support

CONFIG_SOUND=y
# CONFIG_SND is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=y
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=y
CONFIG_HID_AUREAL=y
# CONFIG_HID_BELKIN is not set
CONFIG_HID_BETOP_FF=y
CONFIG_HID_BIGBEN_FF=y
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
CONFIG_HID_CORSAIR=y
CONFIG_HID_COUGAR=y
CONFIG_HID_MACALLY=y
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CP2112=y
# CONFIG_HID_CREATIVE_SB0540 is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELAN=y
CONFIG_HID_ELECOM=y
CONFIG_HID_ELO=y
CONFIG_HID_EZKEY=y
# CONFIG_HID_FT260 is not set
# CONFIG_HID_GEMBIRD is not set
CONFIG_HID_GFRM=y
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
CONFIG_HID_VIVALDI_COMMON=y
CONFIG_HID_VIVALDI=y
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
# CONFIG_HID_WALTOP is not set
CONFIG_HID_VIEWSONIC=y
CONFIG_HID_VRC2=y
CONFIG_HID_XIAOMI=y
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LETSKETCH=y
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_DJ is not set
CONFIG_HID_LOGITECH_HIDPP=y
# CONFIG_LOGITECH_FF is not set
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MALTRON=y
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NINTENDO=y
# CONFIG_NINTENDO_FF is not set
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=y
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
CONFIG_HID_PXRC=y
CONFIG_HID_RAZER=y
CONFIG_HID_PRIMAX=y
CONFIG_HID_RETRODE=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SEMITEK=y
CONFIG_HID_SIGMAMICRO=y
CONFIG_HID_SONY=y
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
CONFIG_HID_TOPRE=y
CONFIG_HID_THINGM=y
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_U2FZERO=y
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
CONFIG_HID_ALPS=y
# CONFIG_HID_MCP2221 is not set
CONFIG_HID_KUNIT_TEST=y
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
# end of USB HID support

#
# I2C HID support
#
CONFIG_I2C_HID_OF=y
CONFIG_I2C_HID_OF_ELAN=y
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support

CONFIG_I2C_HID_CORE=y

#
# Intel ISH HID support
#
# end of Intel ISH HID support

#
# AMD SFH HID Support
#
CONFIG_AMD_SFH_HID=y
# end of AMD SFH HID Support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=y
CONFIG_USB_CONN_GPIO=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_PCI is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_PRODUCTLIST=y
CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI_RENESAS=y
CONFIG_USB_XHCI_PLATFORM=y
# CONFIG_USB_XHCI_HISTB is not set
CONFIG_USB_XHCI_MTK=y
# CONFIG_USB_XHCI_MVEBU is not set
CONFIG_USB_XHCI_RCAR=y
CONFIG_USB_EHCI_BRCMSTB=y
CONFIG_USB_BRCMSTB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_NPCM7XX=y
CONFIG_USB_EHCI_HCD_OMAP=y
CONFIG_USB_EHCI_HCD_ORION=y
# CONFIG_USB_EHCI_HCD_SPEAR is not set
# CONFIG_USB_EHCI_HCD_STI is not set
CONFIG_USB_EHCI_HCD_AT91=y
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
CONFIG_USB_EHCI_SH=y
CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_EHCI_MV=y
CONFIG_USB_CNS3XXX_EHCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SPEAR=y
# CONFIG_USB_OHCI_HCD_STI is not set
# CONFIG_USB_OHCI_HCD_S3C2410 is not set
CONFIG_USB_OHCI_HCD_LPC32XX=y
# CONFIG_USB_OHCI_HCD_AT91 is not set
# CONFIG_USB_OHCI_HCD_OMAP3 is not set
CONFIG_USB_OHCI_HCD_DAVINCI=y
# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_SH=y
# CONFIG_USB_OHCI_EXYNOS is not set
CONFIG_USB_CNS3XXX_OHCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_SL811_CS=y
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_HCD_BCMA=y
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
# CONFIG_USB_RENESAS_USBHS is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y

#
# USB dual-mode controller drivers
#
CONFIG_USB_CDNS_SUPPORT=y
CONFIG_USB_CDNS3=y
CONFIG_USB_CDNS3_GADGET=y
# CONFIG_USB_CDNS3_HOST is not set
CONFIG_USB_CDNS3_TI=y
CONFIG_USB_CDNS3_IMX=y
# CONFIG_USB_FOTG210 is not set
CONFIG_USB_MTU3=y
CONFIG_USB_MTU3_HOST=y
# CONFIG_USB_MTU3_GADGET is not set
# CONFIG_USB_MTU3_DUAL_ROLE is not set
CONFIG_USB_MTU3_DEBUG=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_GADGET is not set
# CONFIG_USB_MUSB_DUAL_ROLE is not set

#
# Platform Glue Layer
#
# CONFIG_USB_MUSB_TUSB6010 is not set
CONFIG_USB_MUSB_DSPS=y
# CONFIG_USB_MUSB_UX500 is not set
CONFIG_USB_MUSB_MEDIATEK=y
CONFIG_USB_MUSB_POLARFIRE_SOC=y

#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_ULPI=y
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_OMAP=y
CONFIG_USB_DWC3_EXYNOS=y
CONFIG_USB_DWC3_KEYSTONE=y
# CONFIG_USB_DWC3_ST is not set
# CONFIG_USB_DWC3_QCOM is not set
CONFIG_USB_DWC3_XILINX=y
CONFIG_USB_DWC3_AM62=y
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
CONFIG_USB_ISP1760_GADGET_ROLE=y
# CONFIG_USB_ISP1760_DUAL_ROLE is not set

#
# USB port drivers
#
CONFIG_USB_USS720=y
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_QCOM_EUD=y
# CONFIG_APPLE_MFI_FASTCHARGE is not set
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=y
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
CONFIG_USB_HSIC_USB4604=y
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_BRCM_USB_PINMAP is not set
CONFIG_USB_ONBOARD_HUB=y

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_KEYSTONE_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_AM335X_CONTROL_USB=y
CONFIG_AM335X_PHY_USB=y
CONFIG_USB_ISP1301=y
CONFIG_USB_TEGRA_PHY=y
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
# end of USB Physical Layer drivers

CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_VERBOSE is not set
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
# CONFIG_U_SERIAL_CONSOLE is not set

#
# USB Peripheral Controller
#
CONFIG_USB_LPC32XX=y
# CONFIG_USB_FUSB300 is not set
CONFIG_USB_GR_UDC=y
CONFIG_USB_R8A66597=y
# CONFIG_USB_RENESAS_USB3 is not set
# CONFIG_USB_PXA27X is not set
CONFIG_USB_MV_UDC=y
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_SNP_UDC_PLAT is not set
# CONFIG_USB_M66592 is not set
CONFIG_USB_BDC_UDC=y
CONFIG_USB_NET2272=y
# CONFIG_USB_NET2272_DMA is not set
CONFIG_USB_GADGET_XILINX=y
CONFIG_USB_ASPEED_UDC=y
CONFIG_USB_ASPEED_VHUB=y
CONFIG_USB_DUMMY_HCD=y
# end of USB Peripheral Controller

CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_SS_LB=y
CONFIG_USB_U_SERIAL=y
CONFIG_USB_F_FS=y
CONFIG_USB_F_HID=y
CONFIG_USB_F_PRINTER=y
# CONFIG_USB_CONFIGFS is not set

#
# USB Gadget precomposed configurations
#
CONFIG_USB_ZERO=y
CONFIG_USB_GADGETFS=y
CONFIG_USB_FUNCTIONFS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
# CONFIG_USB_G_SERIAL is not set
CONFIG_USB_G_PRINTER=y
CONFIG_USB_G_HID=y
CONFIG_USB_G_DBGP=y
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
# CONFIG_USB_G_WEBCAM is not set
CONFIG_USB_RAW_GADGET=y
# end of USB Gadget precomposed configurations

CONFIG_TYPEC=y
CONFIG_TYPEC_TCPM=y
# CONFIG_TYPEC_TCPCI is not set
# CONFIG_TYPEC_FUSB302 is not set
CONFIG_TYPEC_TPS6598X=y
# CONFIG_TYPEC_ANX7411 is not set
CONFIG_TYPEC_RT1719=y
CONFIG_TYPEC_HD3SS3220=y
# CONFIG_TYPEC_STUSB160X is not set
# CONFIG_TYPEC_QCOM_PMIC is not set
CONFIG_TYPEC_WUSB3801=y

#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_FSA4480=y
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support

#
# USB Type-C Alternate Mode drivers
#
# end of USB Type-C Alternate Mode drivers

CONFIG_USB_ROLE_SWITCH=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_AN30259A is not set
CONFIG_LEDS_ARIEL=y
CONFIG_LEDS_AW2013=y
CONFIG_LEDS_BCM6328=y
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_LM3692X=y
CONFIG_LEDS_MT6323=y
# CONFIG_LEDS_S3C24XX is not set
CONFIG_LEDS_COBALT_QUBE=y
CONFIG_LEDS_COBALT_RAQ=y
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=y
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA955X_GPIO is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_NS2=y
# CONFIG_LEDS_NETXBIG is not set
# CONFIG_LEDS_ASIC3 is not set
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX8997=y
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_MENF21BMC=y
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_PM8058=y
CONFIG_LEDS_MLXREG=y
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_TI_LMU_COMMON=y
# CONFIG_LEDS_LM3697 is not set
CONFIG_LEDS_IP30=y
CONFIG_LEDS_ACER_A500=y
CONFIG_LEDS_BCM63138=y
CONFIG_LEDS_LGM=y

#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_AS3645A=y
CONFIG_LEDS_KTD2692=y
# CONFIG_LEDS_LM3601X is not set
CONFIG_LEDS_MAX77693=y
CONFIG_LEDS_MT6360=y
CONFIG_LEDS_RT4505=y
CONFIG_LEDS_RT8515=y
CONFIG_LEDS_SGM3140=y

#
# RGB LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_ONESHOT=y
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_AUDIO is not set
CONFIG_LEDS_TRIGGER_TTY=y

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y

#
# Speakup console speech
#
# end of Speakup console speech

CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
CONFIG_RTC_DEBUG=y
CONFIG_RTC_LIB_KUNIT_TEST=y
# CONFIG_RTC_NVMEM is not set

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_88PM860X is not set
CONFIG_RTC_DRV_88PM80X=y
CONFIG_RTC_DRV_ABB5ZES3=y
CONFIG_RTC_DRV_ABEOZ9=y
CONFIG_RTC_DRV_ABX80X=y
# CONFIG_RTC_DRV_BRCMSTB is not set
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_HYM8563=y
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8907=y
# CONFIG_RTC_DRV_MAX8998 is not set
# CONFIG_RTC_DRV_MAX8997 is not set
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_NCT3018Y=y
CONFIG_RTC_DRV_RK808=y
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_ISL12026=y
# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=y
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
# CONFIG_RTC_DRV_RX8581 is not set
CONFIG_RTC_DRV_RX8025=y
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
CONFIG_RTC_DRV_RV3032=y
CONFIG_RTC_DRV_RV8803=y
CONFIG_RTC_DRV_S5M=y
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_DS3232_HWMON=y
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_RV3029C2=y
# CONFIG_RTC_DRV_RV3029_HWMON is not set
# CONFIG_RTC_DRV_RX6110 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
# CONFIG_RTC_DRV_DA9052 is not set
# CONFIG_RTC_DRV_DA9063 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_GAMECUBE is not set
CONFIG_RTC_DRV_SC27XX=y
CONFIG_RTC_DRV_SPEAR=y
# CONFIG_RTC_DRV_PCF50633 is not set
CONFIG_RTC_DRV_ZYNQMP=y

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_ASM9260=y
CONFIG_RTC_DRV_DAVINCI=y
CONFIG_RTC_DRV_DIGICOLOR=y
CONFIG_RTC_DRV_FSL_FTM_ALARM=y
CONFIG_RTC_DRV_MESON=y
CONFIG_RTC_DRV_MESON_VRTC=y
CONFIG_RTC_DRV_OMAP=y
# CONFIG_RTC_DRV_S3C is not set
CONFIG_RTC_DRV_EP93XX=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_RTC_DRV_AT91SAM9=y
# CONFIG_RTC_DRV_RZN1 is not set
CONFIG_RTC_DRV_GENERIC=y
CONFIG_RTC_DRV_VT8500=y
CONFIG_RTC_DRV_SUNXI=y
# CONFIG_RTC_DRV_MV is not set
CONFIG_RTC_DRV_ARMADA38X=y
CONFIG_RTC_DRV_CADENCE=y
CONFIG_RTC_DRV_FTRTC010=y
CONFIG_RTC_DRV_STMP=y
CONFIG_RTC_DRV_JZ4740=y
# CONFIG_RTC_DRV_LPC24XX is not set
CONFIG_RTC_DRV_LPC32XX=y
CONFIG_RTC_DRV_PM8XXX=y
CONFIG_RTC_DRV_TEGRA=y
CONFIG_RTC_DRV_MXC=y
CONFIG_RTC_DRV_MXC_V2=y
CONFIG_RTC_DRV_SNVS=y
CONFIG_RTC_DRV_MOXART=y
CONFIG_RTC_DRV_MT2712=y
CONFIG_RTC_DRV_MT6397=y
# CONFIG_RTC_DRV_MT7622 is not set
CONFIG_RTC_DRV_XGENE=y
# CONFIG_RTC_DRV_R7301 is not set
# CONFIG_RTC_DRV_STM32 is not set
CONFIG_RTC_DRV_RTD119X=y
CONFIG_RTC_DRV_ASPEED=y
# CONFIG_RTC_DRV_TI_K3 is not set

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=y
CONFIG_RTC_DRV_GOLDFISH=y
CONFIG_RTC_DRV_MSC313=y
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_SYSFS_STATS=y
# CONFIG_DMABUF_HEAPS_SYSTEM is not set
# end of DMABUF options

CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
CONFIG_LINEDISP=y
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=y
CONFIG_IMG_ASCII_LCD=y
CONFIG_LCD2S=y
CONFIG_PARPORT_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
CONFIG_CHARLCD_BL_ON=y
# CONFIG_CHARLCD_BL_FLASH is not set
# CONFIG_PANEL is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
CONFIG_UIO_FSL_ELBC_GPCM=y
# CONFIG_UIO_FSL_ELBC_GPCM_NETX5152 is not set
CONFIG_UIO_PRUSS=y
CONFIG_UIO_MF624=y
CONFIG_VFIO=y
CONFIG_VFIO_CONTAINER=y
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO_PCI_CORE=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=y
CONFIG_VFIO_PLATFORM=y
CONFIG_VFIO_AMBA=y
CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=y
CONFIG_VFIO_PLATFORM_AMDXGBE_RESET=y
# CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET is not set
CONFIG_VFIO_MDEV=y
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
CONFIG_VHOST_MENU=y
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
CONFIG_STAGING=y

#
# IIO staging drivers
#

#
# Accelerometers
#
# end of Accelerometers

#
# Analog to digital converters
#
# end of Analog to digital converters

#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=y
CONFIG_ADT7316_I2C=y
# end of Analog digital bi-direction converters

#
# Direct Digital Synthesis
#
# end of Direct Digital Synthesis

#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y
# end of Network Analyzer, Impedance Converters

#
# Active energy metering IC
#
# CONFIG_ADE7854 is not set
# end of Active energy metering IC

#
# Resolver to digital converters
#
# end of Resolver to digital converters
# end of IIO staging drivers

CONFIG_USB_EMXX=y
CONFIG_STAGING_MEDIA=y
# CONFIG_VIDEO_IMX_MEDIA is not set
# CONFIG_VIDEO_IMX8MQ_MIPI_CSI2 is not set
CONFIG_VIDEO_MAX96712=y
CONFIG_VIDEO_MESON_VDEC=y
CONFIG_VIDEO_OMAP4=y
# CONFIG_VIDEO_ROCKCHIP_VDEC is not set
# CONFIG_VIDEO_SUNXI is not set
# CONFIG_STAGING_MEDIA_DEPRECATED is not set
# CONFIG_BCM_VIDEOCORE is not set
CONFIG_XIL_AXIS_FIFO=y
# CONFIG_FIELDBUS_DEV is not set
# CONFIG_VME_BUS is not set
CONFIG_GOLDFISH=y
CONFIG_GOLDFISH_PIPE=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=y
CONFIG_MLXREG_IO=y
CONFIG_MLXREG_LC=y
CONFIG_NVSW_SN2201=y
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_COMMON_CLK is not set
CONFIG_HWSPINLOCK=y
# CONFIG_HWSPINLOCK_OMAP is not set
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_HWSPINLOCK_SPRD=y
CONFIG_HWSPINLOCK_STM32=y
# CONFIG_HWSPINLOCK_SUN6I is not set
# CONFIG_HSEM_U8500 is not set

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_CLKSRC_MMIO=y
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
CONFIG_DAVINCI_TIMER=y
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
# CONFIG_DW_APB_TIMER is not set
CONFIG_FTTMR010_TIMER=y
CONFIG_IXP4XX_TIMER=y
# CONFIG_MESON6_TIMER is not set
CONFIG_OWL_TIMER=y
CONFIG_RDA_TIMER=y
CONFIG_SUN4I_TIMER=y
CONFIG_TEGRA_TIMER=y
CONFIG_VT8500_TIMER=y
# CONFIG_NPCM7XX_TIMER is not set
CONFIG_ASM9260_TIMER=y
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
CONFIG_MXS_TIMER=y
CONFIG_NSPIRE_TIMER=y
CONFIG_INTEGRATOR_AP_TIMER=y
CONFIG_CLKSRC_PISTACHIO=y
# CONFIG_CLKSRC_STM32_LP is not set
CONFIG_ARMV7M_SYSTICK=y
# CONFIG_ATMEL_PIT is not set
CONFIG_ATMEL_ST=y
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
CONFIG_FSL_FTM_TIMER=y
CONFIG_OXNAS_RPS_TIMER=y
# CONFIG_MTK_TIMER is not set
# CONFIG_SPRD_TIMER is not set
# CONFIG_CLKSRC_JCORE_PIT is not set
CONFIG_SH_TIMER_CMT=y
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
CONFIG_EM_TIMER_STI=y
CONFIG_CLKSRC_PXA=y
CONFIG_TIMER_IMX_SYS_CTR=y
# CONFIG_CLKSRC_ST_LPC is not set
CONFIG_GXP_TIMER=y
CONFIG_MSC313E_TIMER=y
CONFIG_MICROCHIP_PIT64B=y
# CONFIG_GOLDFISH_TIMER is not set
# end of Clock Source drivers

# CONFIG_MAILBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_OWL_PM_DOMAINS is not set

#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=y
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_GX_PM_DOMAINS is not set
CONFIG_MESON_EE_PM_DOMAINS=y
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers

#
# Apple SoC drivers
#
# CONFIG_APPLE_PMGR_PWRSTATE is not set
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers

#
# ASPEED SoC drivers
#
CONFIG_ASPEED_LPC_CTRL=y
CONFIG_ASPEED_LPC_SNOOP=y
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
CONFIG_ASPEED_SOCINFO=y
# end of ASPEED SoC drivers

CONFIG_AT91_SOC_ID=y
CONFIG_AT91_SOC_SFR=y

#
# Broadcom SoC drivers
#
CONFIG_BCM2835_POWER=y
CONFIG_SOC_BCM63XX=y
# CONFIG_SOC_BRCMSTB is not set
CONFIG_BCM63XX_POWER=y
CONFIG_BCM_PMB=y
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
CONFIG_QUICC_ENGINE=y
CONFIG_DPAA2_CONSOLE=y
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# CONFIG_IMX_GPCV2_PM_DOMAINS is not set
CONFIG_SOC_IMX8M=y
CONFIG_SOC_IMX9=y
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=y
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

# CONFIG_LOONGSON2_GUTS is not set

#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
CONFIG_MTK_INFRACFG=y
# CONFIG_MTK_PMIC_WRAP is not set
CONFIG_MTK_SCPSYS=y
CONFIG_MTK_SCPSYS_PM_DOMAINS=y
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers

#
# Qualcomm SoC drivers
#
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_GENI_SE=y
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SMEM is not set
# CONFIG_QCOM_SMD_RPM is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_WCNSS_CTRL is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers

CONFIG_SOC_RENESAS=y
CONFIG_RST_RCAR=y
CONFIG_SYSC_RCAR=y
CONFIG_SYSC_RCAR_GEN4=y
CONFIG_SYSC_R8A77995=y
CONFIG_SYSC_R8A7794=y
CONFIG_SYSC_R8A77990=y
CONFIG_SYSC_R8A7779=y
# CONFIG_SYSC_R8A7790 is not set
CONFIG_SYSC_R8A7795=y
CONFIG_SYSC_R8A7791=y
CONFIG_SYSC_R8A77965=y
CONFIG_SYSC_R8A77960=y
CONFIG_SYSC_R8A77961=y
# CONFIG_SYSC_R8A779F0 is not set
CONFIG_SYSC_R8A7792=y
CONFIG_SYSC_R8A77980=y
CONFIG_SYSC_R8A77970=y
# CONFIG_SYSC_R8A779A0 is not set
CONFIG_SYSC_R8A779G0=y
# CONFIG_SYSC_RMOBILE is not set
CONFIG_SYSC_R8A77470=y
# CONFIG_SYSC_R8A7745 is not set
CONFIG_SYSC_R8A7742=y
# CONFIG_SYSC_R8A7743 is not set
CONFIG_SYSC_R8A774C0=y
# CONFIG_SYSC_R8A774E1 is not set
# CONFIG_SYSC_R8A774A1 is not set
CONFIG_SYSC_R8A774B1=y
# CONFIG_ROCKCHIP_GRF is not set
CONFIG_ROCKCHIP_IODOMAIN=y
# CONFIG_ROCKCHIP_PM_DOMAINS is not set
CONFIG_SOC_SAMSUNG=y
# CONFIG_EXYNOS_CHIPID is not set
CONFIG_EXYNOS_USI=y
CONFIG_EXYNOS_PM_DOMAINS=y
CONFIG_EXYNOS_REGULATOR_COUPLER=y
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
CONFIG_SOC_TI=y
# CONFIG_UX500_SOC_ID is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
# CONFIG_EXTCON_FSA9480 is not set
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX14577=y
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77693=y
# CONFIG_EXTCON_MAX77843 is not set
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PALMAS=y
CONFIG_EXTCON_PTN5150=y
CONFIG_EXTCON_QCOM_SPMI_MISC=y
CONFIG_EXTCON_RT8973A=y
# CONFIG_EXTCON_SM5502 is not set
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_TUSB320=y
CONFIG_MEMORY=y
CONFIG_DDR=y
# CONFIG_ATMEL_SDRAMC is not set
CONFIG_ATMEL_EBI=y
CONFIG_BRCMSTB_DPFE=y
CONFIG_BRCMSTB_MEMC=y
CONFIG_BT1_L2_CTL=y
CONFIG_TI_AEMIF=y
CONFIG_TI_EMIF=y
CONFIG_OMAP_GPMC=y
# CONFIG_OMAP_GPMC_DEBUG is not set
# CONFIG_MVEBU_DEVBUS is not set
# CONFIG_FSL_CORENET_CF is not set
CONFIG_FSL_IFC=y
CONFIG_JZ4780_NEMC=y
CONFIG_MTK_SMI=y
# CONFIG_DA8XX_DDRCTL is not set
CONFIG_RENESAS_RPCIF=y
CONFIG_STM32_FMC2_EBI=y
CONFIG_SAMSUNG_MC=y
CONFIG_EXYNOS_SROM=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_IIO_TRIGGERED_EVENT=y

#
# Accelerometers
#
CONFIG_ADXL313=y
CONFIG_ADXL313_I2C=y
CONFIG_ADXL345=y
CONFIG_ADXL345_I2C=y
CONFIG_ADXL355=y
CONFIG_ADXL355_I2C=y
CONFIG_ADXL367=y
CONFIG_ADXL367_I2C=y
# CONFIG_ADXL372_I2C is not set
# CONFIG_BMA180 is not set
CONFIG_BMA400=y
CONFIG_BMA400_I2C=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_DA280=y
CONFIG_DA311=y
CONFIG_DMARD06=y
CONFIG_DMARD09=y
CONFIG_DMARD10=y
CONFIG_FXLS8962AF=y
CONFIG_FXLS8962AF_I2C=y
# CONFIG_HID_SENSOR_ACCEL_3D is not set
CONFIG_IIO_ST_ACCEL_3AXIS=y
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y
# CONFIG_IIO_KX022A_I2C is not set
# CONFIG_KXSD9 is not set
# CONFIG_KXCJK1013 is not set
CONFIG_MC3230=y
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
CONFIG_MMA7660=y
CONFIG_MMA8452=y
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
# CONFIG_MMA9553 is not set
CONFIG_MSA311=y
CONFIG_MXC4005=y
CONFIG_MXC6255=y
# CONFIG_STK8312 is not set
CONFIG_STK8BA50=y
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD7091R5=y
CONFIG_AD7291=y
# CONFIG_AD7606_IFACE_PARALLEL is not set
CONFIG_AD799X=y
CONFIG_ADI_AXI_ADC=y
# CONFIG_AT91_ADC is not set
CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_BCM_IPROC_ADC=y
CONFIG_BERLIN2_ADC=y
# CONFIG_DA9150_GPADC is not set
CONFIG_DLN2_ADC=y
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_EXYNOS_ADC=y
CONFIG_MXS_LRADC_ADC=y
CONFIG_FSL_MX25_ADC=y
# CONFIG_HX711 is not set
CONFIG_INA2XX_ADC=y
CONFIG_INGENIC_ADC=y
CONFIG_IMX7D_ADC=y
CONFIG_IMX8QXP_ADC=y
# CONFIG_LPC18XX_ADC is not set
CONFIG_LPC32XX_ADC=y
# CONFIG_LTC2471 is not set
CONFIG_LTC2485=y
CONFIG_LTC2497=y
CONFIG_MAX1363=y
CONFIG_MAX9611=y
CONFIG_MCP3422=y
CONFIG_MEDIATEK_MT6360_ADC=y
CONFIG_MEDIATEK_MT6577_AUXADC=y
CONFIG_MEN_Z188_ADC=y
# CONFIG_NAU7802 is not set
CONFIG_NPCM_ADC=y
CONFIG_PALMAS_GPADC=y
# CONFIG_QCOM_PM8XXX_XOADC is not set
CONFIG_RCAR_GYRO_ADC=y
CONFIG_ROCKCHIP_SARADC=y
# CONFIG_RICHTEK_RTQ6056 is not set
CONFIG_RZG2L_ADC=y
# CONFIG_SC27XX_ADC is not set
CONFIG_SPEAR_ADC=y
CONFIG_SD_ADC_MODULATOR=y
CONFIG_STM32_ADC_CORE=y
# CONFIG_STM32_ADC is not set
# CONFIG_STM32_DFSDM_CORE is not set
# CONFIG_STM32_DFSDM_ADC is not set
# CONFIG_STMPE_ADC is not set
CONFIG_TI_ADC081C=y
CONFIG_TI_ADS1015=y
CONFIG_TI_AM335X_ADC=y
CONFIG_VF610_ADC=y
CONFIG_VIPERBOARD_ADC=y
# CONFIG_XILINX_XADC is not set
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters

#
# Analog to digital and digital to analog converters
#
# end of Analog to digital and digital to analog converters

#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=y
# end of Analog Front Ends

#
# Amplifiers
#
CONFIG_HMC425=y
# end of Amplifiers

#
# Capacitance to digital converters
#
CONFIG_AD7150=y
# CONFIG_AD7746 is not set
# end of Capacitance to digital converters

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
CONFIG_ATLAS_EZO_SENSOR=y
CONFIG_BME680=y
CONFIG_BME680_I2C=y
CONFIG_CCS811=y
CONFIG_IAQCORE=y
CONFIG_PMS7003=y
CONFIG_SCD30_CORE=y
# CONFIG_SCD30_I2C is not set
# CONFIG_SCD30_SERIAL is not set
# CONFIG_SCD4X is not set
CONFIG_SENSIRION_SGP30=y
CONFIG_SENSIRION_SGP40=y
CONFIG_SPS30=y
CONFIG_SPS30_I2C=y
# CONFIG_SPS30_SERIAL is not set
# CONFIG_SENSEAIR_SUNRISE_CO2 is not set
CONFIG_VZ89X=y
# end of Chemical Sensors

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=y

#
# IIO SCMI Sensors
#
CONFIG_IIO_SCMI=y
# end of IIO SCMI Sensors

#
# SSP Sensor Common
#
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5380=y
# CONFIG_AD5446 is not set
CONFIG_AD5592R_BASE=y
CONFIG_AD5593R=y
CONFIG_AD5686=y
CONFIG_AD5696_I2C=y
CONFIG_DPOT_DAC=y
CONFIG_DS4424=y
# CONFIG_LPC18XX_DAC is not set
CONFIG_M62332=y
# CONFIG_MAX517 is not set
CONFIG_MAX5821=y
CONFIG_MCP4725=y
CONFIG_STM32_DAC=y
CONFIG_STM32_DAC_CORE=y
# CONFIG_TI_DAC5571 is not set
# CONFIG_VF610_DAC is not set
# end of Digital to analog converters

#
# IIO dummy driver
#
CONFIG_IIO_SIMPLE_DUMMY=y
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
# end of IIO dummy driver

#
# Filters
#
# end of Filters

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
CONFIG_HID_SENSOR_GYRO_3D=y
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_ITG3200=y
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
# CONFIG_AFE4404 is not set
CONFIG_MAX30100=y
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
# CONFIG_HDC100X is not set
CONFIG_HDC2010=y
# CONFIG_HID_SENSOR_HUMIDITY is not set
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTU21=y
# CONFIG_SI7005 is not set
CONFIG_SI7020=y
# end of Humidity sensors

#
# Inertial measurement units
#
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
CONFIG_BOSCH_BNO055=y
CONFIG_BOSCH_BNO055_SERIAL=y
# CONFIG_BOSCH_BNO055_I2C is not set
CONFIG_FXOS8700=y
CONFIG_FXOS8700_I2C=y
# CONFIG_KMX61 is not set
CONFIG_INV_ICM42600=y
CONFIG_INV_ICM42600_I2C=y
# CONFIG_INV_MPU6050_I2C is not set
CONFIG_IIO_ST_LSM6DSX=y
CONFIG_IIO_ST_LSM6DSX_I2C=y
CONFIG_IIO_ST_LSM6DSX_I3C=y
CONFIG_IIO_ST_LSM9DS0=y
# CONFIG_IIO_ST_LSM9DS0_I2C is not set
# end of Inertial measurement units

#
# Light sensors
#
CONFIG_ADJD_S311=y
CONFIG_ADUX1020=y
CONFIG_AL3010=y
# CONFIG_AL3320A is not set
CONFIG_APDS9300=y
CONFIG_APDS9960=y
# CONFIG_AS73211 is not set
CONFIG_BH1750=y
# CONFIG_BH1780 is not set
# CONFIG_CM32181 is not set
# CONFIG_CM3232 is not set
# CONFIG_CM3323 is not set
CONFIG_CM3605=y
# CONFIG_CM36651 is not set
# CONFIG_GP2AP002 is not set
# CONFIG_GP2AP020A00F is not set
CONFIG_IQS621_ALS=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_ISL29125=y
# CONFIG_HID_SENSOR_ALS is not set
CONFIG_HID_SENSOR_PROX=y
CONFIG_JSA1212=y
CONFIG_RPR0521=y
CONFIG_LTR501=y
CONFIG_LTRF216A=y
CONFIG_LV0104CS=y
CONFIG_MAX44000=y
CONFIG_MAX44009=y
CONFIG_NOA1305=y
# CONFIG_OPT3001 is not set
# CONFIG_PA12203001 is not set
CONFIG_SI1133=y
# CONFIG_SI1145 is not set
CONFIG_STK3310=y
CONFIG_ST_UVIS25=y
CONFIG_ST_UVIS25_I2C=y
# CONFIG_TCS3414 is not set
# CONFIG_TCS3472 is not set
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
# CONFIG_TSL2591 is not set
CONFIG_TSL2772=y
CONFIG_TSL4531=y
CONFIG_US5182D=y
CONFIG_VCNL4000=y
CONFIG_VCNL4035=y
# CONFIG_VEML6030 is not set
CONFIG_VEML6070=y
CONFIG_VL6180=y
CONFIG_ZOPT2201=y
# end of Light sensors

#
# Magnetometer sensors
#
CONFIG_AK8974=y
CONFIG_AK8975=y
CONFIG_AK09911=y
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
# CONFIG_MAG3110 is not set
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
# CONFIG_SENSORS_HMC5843_I2C is not set
CONFIG_SENSORS_RM3100=y
CONFIG_SENSORS_RM3100_I2C=y
CONFIG_YAMAHA_YAS530=y
# end of Magnetometer sensors

#
# Multiplexers
#
# CONFIG_IIO_MUX is not set
# end of Multiplexers

#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=y
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set
# end of Inclinometer sensors

CONFIG_IIO_RESCALE_KUNIT_TEST=y
CONFIG_IIO_FORMAT_KUNIT_TEST=y

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
CONFIG_IIO_STM32_TIMER_TRIGGER=y
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
# CONFIG_IIO_SYSFS_TRIGGER is not set
# end of Triggers - standalone

#
# Linear and angular position sensors
#
CONFIG_IQS624_POS=y
CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE=y
# end of Linear and angular position sensors

#
# Digital potentiometers
#
# CONFIG_AD5110 is not set
CONFIG_AD5272=y
CONFIG_DS1803=y
CONFIG_MAX5432=y
CONFIG_MCP4018=y
CONFIG_MCP4531=y
CONFIG_TPL0102=y
# end of Digital potentiometers

#
# Digital potentiostats
#
CONFIG_LMP91000=y
# end of Digital potentiostats

#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_DLHL60D=y
# CONFIG_DPS310 is not set
CONFIG_HID_SENSOR_PRESS=y
# CONFIG_HP03 is not set
CONFIG_ICP10100=y
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL3115=y
# CONFIG_MS5611 is not set
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
# CONFIG_IIO_ST_PRESS_I2C is not set
CONFIG_T5403=y
CONFIG_HP206C=y
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
# end of Pressure sensors

#
# Lightning sensors
#
# end of Lightning sensors

#
# Proximity and distance sensors
#
CONFIG_ISL29501=y
CONFIG_LIDAR_LITE_V2=y
CONFIG_MB1232=y
CONFIG_PING=y
# CONFIG_RFD77402 is not set
CONFIG_SRF04=y
CONFIG_SX_COMMON=y
CONFIG_SX9310=y
CONFIG_SX9324=y
CONFIG_SX9360=y
CONFIG_SX9500=y
# CONFIG_SRF08 is not set
# CONFIG_VCNL3020 is not set
CONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
# end of Resolver to digital converters

#
# Temperature sensors
#
# CONFIG_IQS620AT_TEMP is not set
# CONFIG_HID_SENSOR_TEMP is not set
CONFIG_MLX90614=y
# CONFIG_MLX90632 is not set
# CONFIG_TMP006 is not set
CONFIG_TMP007=y
CONFIG_TMP117=y
# CONFIG_TSYS01 is not set
CONFIG_TSYS02D=y
# CONFIG_MAX30208 is not set
# end of Temperature sensors

CONFIG_NTB=y
CONFIG_NTB_MSI=y
CONFIG_NTB_IDT=y
# CONFIG_NTB_SWITCHTEC is not set
CONFIG_NTB_PINGPONG=y
# CONFIG_NTB_TOOL is not set
CONFIG_NTB_PERF=y
CONFIG_NTB_MSI_TEST=y
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
CONFIG_MADERA_IRQ=y
# CONFIG_JCORE_AIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
CONFIG_RENESAS_RZA1_IRQC=y
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
CONFIG_XILINX_INTC=y
CONFIG_INGENIC_TCU_IRQ=y
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
CONFIG_IMX_IRQSTEER=y
CONFIG_IMX_INTMUX=y
CONFIG_IMX_MU_MSI=y
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
CONFIG_SUNPLUS_SP7021_INTC=y
# end of IRQ chip support

CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_A10SR=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
CONFIG_RESET_BERLIN=y
CONFIG_RESET_BRCMSTB=y
CONFIG_RESET_BRCMSTB_RESCAL=y
CONFIG_RESET_HSDK=y
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_INTEL_GW is not set
CONFIG_RESET_K210=y
CONFIG_RESET_LANTIQ=y
# CONFIG_RESET_LPC18XX is not set
CONFIG_RESET_MCHP_SPARX5=y
CONFIG_RESET_MESON=y
CONFIG_RESET_MESON_AUDIO_ARB=y
# CONFIG_RESET_NPCM is not set
# CONFIG_RESET_PISTACHIO is not set
CONFIG_RESET_QCOM_AOSS=y
# CONFIG_RESET_QCOM_PDC is not set
# CONFIG_RESET_RASPBERRYPI is not set
CONFIG_RESET_RZG2L_USBPHY_CTRL=y
CONFIG_RESET_SCMI=y
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_SOCFPGA is not set
CONFIG_RESET_STARFIVE_JH7100=y
CONFIG_RESET_SUNPLUS=y
CONFIG_RESET_SUNXI=y
CONFIG_RESET_TI_SCI=y
CONFIG_RESET_TI_SYSCON=y
CONFIG_RESET_TI_TPS380X=y
CONFIG_RESET_TN48M_CPLD=y
CONFIG_RESET_UNIPHIER=y
CONFIG_RESET_UNIPHIER_GLUE=y
# CONFIG_RESET_ZYNQ is not set
# CONFIG_COMMON_RESET_HI3660 is not set
CONFIG_COMMON_RESET_HI6220=y

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_LPC18XX_USB_OTG=y
CONFIG_PHY_PISTACHIO_USB=y
CONFIG_PHY_XGENE=y
CONFIG_USB_LGM_PHY=y
CONFIG_PHY_CAN_TRANSCEIVER=y
# CONFIG_PHY_SUN4I_USB is not set
# CONFIG_PHY_SUN9I_USB is not set
CONFIG_PHY_SUN50I_USB3=y
CONFIG_PHY_MESON8_HDMI_TX=y
CONFIG_PHY_MESON8B_USB2=y
# CONFIG_PHY_MESON_GXL_USB2 is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
# CONFIG_PHY_MESON_G12A_USB2 is not set
CONFIG_PHY_MESON_G12A_USB3_PCIE=y
# CONFIG_PHY_MESON_AXG_PCIE is not set
CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG=y
CONFIG_PHY_MESON_AXG_MIPI_DPHY=y

#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_PHY_CYGNUS_PCIE is not set
CONFIG_PHY_BCM_SR_USB=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_BCM_NS_USB2=y
CONFIG_PHY_NS2_USB_DRD=y
# CONFIG_PHY_BRCM_SATA is not set
CONFIG_PHY_BRCM_USB=y
CONFIG_PHY_BCM_SR_PCIE=y
# end of PHY drivers for Broadcom platforms

CONFIG_PHY_CADENCE_DPHY=y
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SALVO is not set
CONFIG_PHY_FSL_IMX8MQ_USB=y
CONFIG_PHY_MIXEL_LVDS_PHY=y
CONFIG_PHY_MIXEL_MIPI_DPHY=y
CONFIG_PHY_FSL_IMX8M_PCIE=y
CONFIG_PHY_FSL_LYNX_28G=y
# CONFIG_PHY_HI6220_USB is not set
CONFIG_PHY_HI3660_USB=y
CONFIG_PHY_HI3670_USB=y
# CONFIG_PHY_HI3670_PCIE is not set
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
CONFIG_PHY_INGENIC_USB=y
CONFIG_PHY_LANTIQ_VRX200_PCIE=y
CONFIG_PHY_LANTIQ_RCU_USB2=y
CONFIG_ARMADA375_USBCLUSTER_PHY=y
CONFIG_PHY_BERLIN_SATA=y
CONFIG_PHY_BERLIN_USB=y
# CONFIG_PHY_MVEBU_A3700_UTMI is not set
CONFIG_PHY_MVEBU_A38X_COMPHY=y
# CONFIG_PHY_MVEBU_CP110_UTMI is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_PHY_PXA_USB=y
CONFIG_PHY_MMP3_USB=y
CONFIG_PHY_MMP3_HSIC=y
CONFIG_PHY_MTK_PCIE=y
CONFIG_PHY_MTK_TPHY=y
# CONFIG_PHY_MTK_UFS is not set
# CONFIG_PHY_MTK_XSPHY is not set
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not set
CONFIG_PHY_LAN966X_SERDES=y
CONFIG_PHY_CPCAP_USB=y
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
CONFIG_PHY_OCELOT_SERDES=y
# CONFIG_PHY_ATH79_USB is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
CONFIG_PHY_QCOM_QUSB2=y
CONFIG_PHY_QCOM_USB_HS=y
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
CONFIG_PHY_QCOM_USB_HSIC=y
CONFIG_PHY_QCOM_USB_HS_28NM=y
CONFIG_PHY_QCOM_USB_SS=y
CONFIG_PHY_QCOM_IPQ806X_USB=y
# CONFIG_PHY_MT7621_PCI is not set
CONFIG_PHY_RALINK_USB=y
CONFIG_PHY_RCAR_GEN3_USB3=y
CONFIG_PHY_ROCKCHIP_DPHY_RX0=y
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=y
CONFIG_PHY_ROCKCHIP_PCIE=y
CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
CONFIG_PHY_ROCKCHIP_TYPEC=y
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
CONFIG_PHY_EXYNOS_PCIE=y
# CONFIG_PHY_SAMSUNG_UFS is not set
CONFIG_PHY_SAMSUNG_USB2=y
# CONFIG_PHY_S5PV210_USB2 is not set
# CONFIG_PHY_EXYNOS5_USBDRD is not set
CONFIG_PHY_UNIPHIER_USB2=y
# CONFIG_PHY_UNIPHIER_USB3 is not set
CONFIG_PHY_UNIPHIER_PCIE=y
CONFIG_PHY_UNIPHIER_AHCI=y
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
CONFIG_PHY_ST_SPEAR1340_MIPHY=y
# CONFIG_PHY_STIH407_USB is not set
CONFIG_PHY_SUNPLUS_USB=y
CONFIG_PHY_TEGRA194_P2U=y
CONFIG_PHY_DA8XX_USB=y
CONFIG_PHY_DM816X_USB=y
CONFIG_OMAP_CONTROL_PHY=y
CONFIG_TI_PIPE3=y
# CONFIG_PHY_TUSB1210 is not set
CONFIG_PHY_INTEL_KEEMBAY_EMMC=y
CONFIG_PHY_INTEL_KEEMBAY_USB=y
CONFIG_PHY_INTEL_LGM_COMBO=y
CONFIG_PHY_INTEL_LGM_EMMC=y
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
CONFIG_PHY_XILINX_ZYNQMP=y
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_IDLE_INJECT=y
# CONFIG_ARM_SCMI_POWERCAP is not set
CONFIG_DTPM=y
CONFIG_DTPM_CPU=y
# CONFIG_DTPM_DEVFREQ is not set
CONFIG_MCB=y
CONFIG_MCB_PCI=y
# CONFIG_MCB_LPC is not set

#
# Performance monitor support
#
CONFIG_ARM_CCN=y
# CONFIG_ARM_CMN is not set
# CONFIG_FSL_IMX8_DDR_PMU is not set
# CONFIG_ARM_DMC620_PMU is not set
CONFIG_ALIBABA_UNCORE_DRW_PMU=y
CONFIG_HNS3_PMU=y
# CONFIG_MESON_DDR_PMU is not set
# end of Performance monitor support

# CONFIG_RAS is not set
CONFIG_USB4=y
# CONFIG_USB4_DEBUGFS_WRITE is not set
CONFIG_USB4_KUNIT_TEST=y
# CONFIG_USB4_DMA_TEST is not set

#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDERFS=y
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
CONFIG_ANDROID_BINDER_IPC_SELFTEST=y
# end of Android

CONFIG_DAX=y
CONFIG_NVMEM=y
# CONFIG_NVMEM_SYSFS is not set
CONFIG_NVMEM_APPLE_EFUSES=y
CONFIG_NVMEM_BCM_OCOTP=y
# CONFIG_NVMEM_BRCM_NVRAM is not set
# CONFIG_NVMEM_IMX_IIM is not set
# CONFIG_NVMEM_IMX_OCOTP is not set
CONFIG_NVMEM_JZ4780_EFUSE=y
CONFIG_NVMEM_LAN9662_OTPC=y
CONFIG_NVMEM_LAYERSCAPE_SFP=y
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
CONFIG_NVMEM_LPC18XX_OTP=y
CONFIG_NVMEM_MESON_MX_EFUSE=y
CONFIG_NVMEM_MICROCHIP_OTPC=y
# CONFIG_NVMEM_MTK_EFUSE is not set
CONFIG_NVMEM_MXS_OCOTP=y
CONFIG_NVMEM_NINTENDO_OTP=y
CONFIG_NVMEM_QCOM_QFPROM=y
# CONFIG_NVMEM_RAVE_SP_EEPROM is not set
CONFIG_NVMEM_RMEM=y
CONFIG_NVMEM_ROCKCHIP_EFUSE=y
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
CONFIG_NVMEM_SC27XX_EFUSE=y
# CONFIG_NVMEM_SNVS_LPGPR is not set
CONFIG_NVMEM_SPRD_EFUSE=y
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
CONFIG_NVMEM_U_BOOT_ENV=y
CONFIG_NVMEM_UNIPHIER_EFUSE=y
CONFIG_NVMEM_VF610_OCOTP=y

#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
# CONFIG_STM_PROTO_SYS_T is not set
# CONFIG_STM_DUMMY is not set
CONFIG_STM_SOURCE_CONSOLE=y
CONFIG_STM_SOURCE_HEARTBEAT=y
# CONFIG_STM_SOURCE_FTRACE is not set
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_PCI=y
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_STH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support

CONFIG_FPGA=y
CONFIG_FPGA_MGR_SOCFPGA=y
# CONFIG_FPGA_MGR_SOCFPGA_A10 is not set
CONFIG_ALTERA_PR_IP_CORE=y
CONFIG_ALTERA_PR_IP_CORE_PLAT=y
CONFIG_FPGA_MGR_ALTERA_CVP=y
CONFIG_FPGA_MGR_ZYNQ_FPGA=y
CONFIG_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=y
CONFIG_XILINX_PR_DECOUPLER=y
# CONFIG_FPGA_REGION is not set
# CONFIG_FPGA_DFL is not set
CONFIG_FPGA_MGR_ZYNQMP_FPGA=y
CONFIG_FPGA_MGR_VERSAL_FPGA=y
CONFIG_FSI=y
CONFIG_FSI_NEW_DEV_NODE=y
# CONFIG_FSI_MASTER_GPIO is not set
# CONFIG_FSI_MASTER_HUB is not set
CONFIG_FSI_MASTER_AST_CF=y
# CONFIG_FSI_MASTER_ASPEED is not set
CONFIG_FSI_SCOM=y
CONFIG_FSI_SBEFIFO=y
CONFIG_FSI_OCC=y
CONFIG_TEE=y
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers

CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
CONFIG_PECI=y
CONFIG_PECI_CPU=y
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_VIRTIO_FS=y
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_METACOPY=y

#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=y
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
# CONFIG_NLS_UTF8 is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_TRUSTED_KEYS=y
# CONFIG_TRUSTED_KEYS_TPM is not set
CONFIG_TRUSTED_KEYS_TEE=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_FORTIFY_SOURCE=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_STACK_ALL_PATTERN is not set
# CONFIG_INIT_STACK_ALL_ZERO is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
# end of Memory initialization

CONFIG_CC_HAS_RANDSTRUCT=y
# CONFIG_RANDSTRUCT_NONE is not set
CONFIG_RANDSTRUCT_FULL=y
CONFIG_RANDSTRUCT=y
# end of Kernel hardening options
# end of Security options

CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_FIPS_NAME="Linux Kernel Cryptographic API"
# CONFIG_CRYPTO_FIPS_CUSTOM_VERSION is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
# CONFIG_CRYPTO_ECDSA is not set
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=y
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_ARIA=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_SM4_GENERIC=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_HCTR2 is not set
CONFIG_CRYPTO_KEYWRAP=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
# CONFIG_CRYPTO_ESSIV is not set
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
# CONFIG_CRYPTO_BLAKE2B is not set
CONFIG_CRYPTO_CMAC=y
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
# CONFIG_CRYPTO_SM3_GENERIC is not set
CONFIG_CRYPTO_STREEBOG=y
# CONFIG_CRYPTO_VMAC is not set
CONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_XXHASH is not set
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
# end of Compression

#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation

#
# Userspace interface
#
# end of Userspace interface

CONFIG_CRYPTO_HASH_INFO=y

#
# Accelerated Cryptographic Algorithms for CPU (powerpc)
#
CONFIG_CRYPTO_MD5_PPC=y
CONFIG_CRYPTO_SHA1_PPC=y
# end of Accelerated Cryptographic Algorithms for CPU (powerpc)

# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
# CONFIG_PKCS7_MESSAGE_PARSER is not set

#
# Certificates for signature checking
#
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_STMP_DEVICE=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_BIT=y
CONFIG_CRC64=y
CONFIG_CRC4=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
CONFIG_XZ_DEC_ARMTHUMB=y
# CONFIG_XZ_DEC_SPARC is not set
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_DMA_API_DEBUG=y
# CONFIG_DMA_API_DEBUG_SG is not set
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
# CONFIG_CPUMASK_OFFSTACK is not set
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_REF_TRACKER=y
CONFIG_PARMAN=y
CONFIG_OBJAGG=y
# end of Library routines

CONFIG_POLYNOMIAL=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_SYMBOLIC_ERRNAME is not set
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_LEB128=y
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_HEADERS_INSTALL is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
CONFIG_DEBUG_FS_ALLOW_NONE=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_CC_HAS_UBSAN_ARRAY_BOUNDS=y
# CONFIG_UBSAN_BOUNDS is not set
CONFIG_UBSAN_SHIFT=y
CONFIG_UBSAN_UNREACHABLE=y
CONFIG_UBSAN_BOOL=y
CONFIG_UBSAN_ENUM=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_DEBUG_PAGE_REF=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
# CONFIG_DEBUG_OBJECTS_FREE is not set
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM_IRQSOFF=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_MAPLE_TREE=y
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RAW_LOCK_NESTING=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_SCF_TORTURE_TEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
CONFIG_DEBUG_KOBJECT=y

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_LIST=y
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_REF_SCALE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_FUNCTION_PROFILER=y
# CONFIG_STACK_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
CONFIG_HWLAT_TRACER=y
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_USER_EVENTS=y
CONFIG_HIST_TRIGGERS=y
CONFIG_TRACE_EVENT_INJECT=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=y
CONFIG_TRACE_EVAL_MAP_FILE=y
# CONFIG_FTRACE_RECORD_RECURSION is not set
CONFIG_GCOV_PROFILE_FTRACE=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_EVENT_TRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_STARTUP_TEST=y
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
CONFIG_SYNTH_EVENT_GEN_TEST=y
CONFIG_HIST_TRIGGERS_DEBUG=y
# CONFIG_RV is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set

#
# powerpc Debugging
#
CONFIG_PPC_DISABLE_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_PPC_EMULATED_STATS is not set
CONFIG_CODE_PATCHING_SELFTEST=y
CONFIG_JUMP_LABEL_FEATURE_CHECKS=y
CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG=y
CONFIG_FTR_FIXUP_SELFTEST=y
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
CONFIG_XMON_DEFAULT_RO_MODE=y
CONFIG_DEBUGGER=y
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
# end of powerpc Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y
# CONFIG_KUNIT_DEFAULT_ENABLED is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
# CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_TEST_DHRY is not set
# CONFIG_LKDTM is not set
CONFIG_CPUMASK_KUNIT_TEST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_TEST_MIN_HEAP=y
CONFIG_TEST_SORT=y
CONFIG_TEST_DIV64=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_TEST_REF_TRACKER=y
CONFIG_RBTREE_TEST=y
# CONFIG_REED_SOLOMON_TEST is not set
CONFIG_INTERVAL_TREE_TEST=y
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_TEST_HEXDUMP=y
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
CONFIG_TEST_PRINTF=y
CONFIG_TEST_SCANF=y
CONFIG_TEST_BITMAP=y
CONFIG_TEST_UUID=y
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_MAPLE_TREE is not set
CONFIG_TEST_RHASHTABLE=y
CONFIG_TEST_IDA=y
CONFIG_TEST_PARMAN=y
CONFIG_FIND_BIT_BENCHMARK=y
CONFIG_TEST_FIRMWARE=y
CONFIG_BITFIELD_KUNIT=y
CONFIG_HASH_KUNIT_TEST=y
CONFIG_RESOURCE_KUNIT_TEST=y
CONFIG_SYSCTL_KUNIT_TEST=y
CONFIG_LIST_KUNIT_TEST=y
CONFIG_LINEAR_RANGES_TEST=y
CONFIG_CMDLINE_KUNIT_TEST=y
CONFIG_BITS_TEST=y
CONFIG_RATIONAL_KUNIT_TEST=y
CONFIG_MEMCPY_KUNIT_TEST=y
CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=y
CONFIG_OVERFLOW_KUNIT_TEST=y
CONFIG_STACKINIT_KUNIT_TEST=y
CONFIG_FORTIFY_KUNIT_TEST=y
CONFIG_HW_BREAKPOINT_KUNIT_TEST=y
CONFIG_STRSCPY_KUNIT_TEST=y
CONFIG_SIPHASH_KUNIT_TEST=y
# CONFIG_TEST_UDELAY is not set
CONFIG_TEST_DEBUG_VIRTUAL=y
CONFIG_TEST_MEMCAT_P=y
CONFIG_TEST_OBJAGG=y
CONFIG_TEST_MEMINIT=y
CONFIG_TEST_FREE_PAGES=y
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking

CONFIG_WARN_MISSING_DOCUMENTS=y
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking

Re: [PATCH v2 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 3157 bytes --]

Hi Baoquan,

I love your patch! Perhaps something to improve:

[auto build test WARNING on akpm-mm/mm-everything]

url:    https://github.com/intel-lab-lkp/linux/commits/Baoquan-He/mm-vmalloc-c-allow-vread-to-read-out-vm_map_ram-areas/20221217-095615
base:   https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-everything
patch link:    https://lore.kernel.org/r/20221217015435.73889-4-bhe%40redhat.com
patch subject: [PATCH v2 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas
config: loongarch-randconfig-r006-20221216
compiler: loongarch64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/368cd65be8fedd1642e53393dc3f28ff8726122d
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Baoquan-He/mm-vmalloc-c-allow-vread-to-read-out-vm_map_ram-areas/20221217-095615
        git checkout 368cd65be8fedd1642e53393dc3f28ff8726122d
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=loongarch olddefconfig
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=loongarch SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   mm/vmalloc.c: In function 'vb_vread':
>> mm/vmalloc.c:3563:49: warning: suggest parentheses around '-' inside '<<' [-Wparentheses]
    3563 |                 n = (re - rs + 1) << PAGE_SHIFT - offset;


vim +3563 mm/vmalloc.c

  3533	
  3534	static void vb_vread(char *buf, char *addr, int count)
  3535	{
  3536		char *start;
  3537		struct vmap_block *vb;
  3538		unsigned long offset;
  3539		unsigned int rs, re, n;
  3540	
  3541		vb = xa_load(&vmap_blocks, addr_to_vb_idx((unsigned long)addr));
  3542	
  3543		spin_lock(&vb->lock);
  3544		if (bitmap_empty(vb->used_map, VMAP_BBMAP_BITS)) {
  3545			spin_unlock(&vb->lock);
  3546			memset(buf, 0, count);
  3547			return;
  3548		}
  3549		for_each_set_bitrange(rs, re, vb->used_map, VMAP_BBMAP_BITS) {
  3550			if (!count)
  3551				break;
  3552			start = vmap_block_vaddr(vb->va->va_start, rs);
  3553			if (addr < start) {
  3554				if (count == 0)
  3555					break;
  3556				*buf = '\0';
  3557				buf++;
  3558				addr++;
  3559				count--;
  3560			}
  3561			/*it could start reading from the middle of used region*/
  3562			offset = offset_in_page(addr);
> 3563			n = (re - rs + 1) << PAGE_SHIFT - offset;
  3564			if (n > count)
  3565				n = count;
  3566			aligned_vread(buf, start+offset, n);
  3567	
  3568			buf += n;
  3569			addr += n;
  3570			count -= n;
  3571		}
  3572		spin_unlock(&vb->lock);
  3573	
  3574		/* zero-fill the left dirty or free regions */
  3575		if (count)
  3576			memset(buf, 0, count);
  3577	}
  3578	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 128397 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/loongarch 6.1.0 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="loongarch64-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_WATCH_QUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
CONFIG_CONTEXT_TRACKING_USER=y
CONFIG_CONTEXT_TRACKING_USER_FORCE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
# CONFIG_FORCE_TASKS_RCU is not set
# CONFIG_FORCE_TASKS_RUDE_RCU is not set
# CONFIG_FORCE_TASKS_TRACE_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_NOCB_CPU is not set
# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
# CONFIG_NUMA_BALANCING is not set
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
# CONFIG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
# end of General setup

CONFIG_LOONGARCH=y
CONFIG_64BIT=y
CONFIG_CPU_HAS_FPU=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_L1_CACHE_SHIFT=6
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MACH_LOONGSON64=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PAGE_SIZE_16KB=y
CONFIG_PGTABLE_2LEVEL=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_SCHED_OMIT_FRAME_POINTER=y

#
# Kernel type and options
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_4KB_3LEVEL is not set
# CONFIG_4KB_4LEVEL is not set
CONFIG_16KB_2LEVEL=y
# CONFIG_16KB_3LEVEL is not set
# CONFIG_64KB_2LEVEL is not set
# CONFIG_64KB_3LEVEL is not set
CONFIG_CMDLINE=""
CONFIG_CMDLINE_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_DMI is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_SMP=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_NR_CPUS=64
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_FORCE_MAX_ORDER=12
CONFIG_ARCH_IOREMAP=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x90000000a0000000
# CONFIG_SECCOMP is not set
# end of Kernel type and options

CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=12
CONFIG_ARCH_MMAP_RND_BITS_MAX=18

#
# Power management options
#
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_GENERIC_GSI=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_TABLE_LIB=y
# CONFIG_ACPI_DEBUGGER is not set
# CONFIG_ACPI_SPCR_TABLE is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_TINY_POWER_BUTTON=y
CONFIG_ACPI_TINY_POWER_BUTTON_SIGNAL=38
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_MCFG=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_THERMAL is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_HMAT=y
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_ACPI_PFRUT=y
# CONFIG_ACPI_FFH is not set
CONFIG_PMIC_OPREGION=y
# end of Power management options

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
# end of ARM System Control and Management Interface Protocol

CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_BCM47XX_NVRAM is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
# CONFIG_EFI_SOFT_RESERVE is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB=y
CONFIG_EFI_ZBOOT=y
CONFIG_EFI_BOOTLOADER_CONTROL=y
CONFIG_EFI_CAPSULE_LOADER=y
CONFIG_EFI_TEST=y
CONFIG_RESET_ATTACK_MITIGATION=y
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
CONFIG_EFI_DISABLE_RUNTIME=y
# CONFIG_EFI_COCO_SECRET is not set
# end of EFI (Extensible Firmware Interface) Support

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

#
# General architecture-dependent options
#
CONFIG_GENERIC_ENTRY=y
CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_TIF_NOHZ=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=12
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
# CONFIG_COMPAT_32BIT_TIME is not set
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# end of GCOV-based kernel profiling

CONFIG_FUNCTION_ALIGNMENT=0
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
CONFIG_ASN1=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK=y
CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_READ_LOCK=y
CONFIG_ARCH_INLINE_READ_LOCK_BH=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_READ_UNLOCK=y
CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_WRITE_LOCK=y
CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB_DEPRECATED is not set
# CONFIG_SLUB_TINY is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLUB_STATS=y
# CONFIG_SLUB_CPU_PARTIAL is not set
# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_COMPAT_BRK=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_DEBUGFS=y
# CONFIG_CMA_SYSFS is not set
CONFIG_CMA_AREAS=19
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
CONFIG_PAGE_IDLE_FLAG=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ZONE_DMA32=y
CONFIG_GET_FREE_REGION=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
CONFIG_GUP_TEST=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# CONFIG_USERFAULTFD is not set
# CONFIG_LRU_GEN is not set

#
# Data Access Monitoring
#
CONFIG_DAMON=y
CONFIG_DAMON_VADDR=y
CONFIG_DAMON_PADDR=y
CONFIG_DAMON_SYSFS=y
# CONFIG_DAMON_DBGFS is not set
# CONFIG_DAMON_RECLAIM is not set
# CONFIG_DAMON_LRU_SORT is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_MRP=y
# CONFIG_BRIDGE_CFM is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=y
CONFIG_MAC802154=y
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
CONFIG_NET_SCH_MULTIQ=y
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFB=y
# CONFIG_NET_SCH_SFQ is not set
CONFIG_NET_SCH_TEQL=y
# CONFIG_NET_SCH_TBF is not set
CONFIG_NET_SCH_CBS=y
CONFIG_NET_SCH_ETF=y
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
CONFIG_NET_SCH_SKBPRIO=y
# CONFIG_NET_SCH_CHOKE is not set
CONFIG_NET_SCH_QFQ=y
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_EMATCH_CANID=y
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BATMAN_V is not set
CONFIG_BATMAN_ADV_NC=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VSOCKETS_LOOPBACK=y
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_QRTR is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
# CONFIG_CAN_GW is not set
# CONFIG_CAN_J1939 is not set
CONFIG_CAN_ISOTP=y
CONFIG_BT=y
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
# CONFIG_BT_BNEP_PROTO_FILTER is not set
CONFIG_BT_HS=y
# CONFIG_BT_LE is not set
CONFIG_BT_LEDS=y
# CONFIG_BT_MSFTEXT is not set
# CONFIG_BT_AOSPEXT is not set
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set

#
# Bluetooth device drivers
#
CONFIG_BT_MTK=y
# CONFIG_BT_HCIBCM4377 is not set
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
CONFIG_BT_MTKUART=y
# CONFIG_BT_QCOMSMD is not set
# CONFIG_BT_VIRTIO is not set
# end of Bluetooth device drivers

CONFIG_MCTP=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT=""

#
# Some wireless drivers require a rate control algorithm
#
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
# CONFIG_NET_9P_FD is not set
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
# CONFIG_CAIF_NETDEV is not set
CONFIG_CAIF_USB=y
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
CONFIG_NFC_NCI=y
# CONFIG_NFC_NCI_SPI is not set
CONFIG_NFC_HCI=y
# CONFIG_NFC_SHDLC is not set

#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_VIRTUAL_NCI is not set
CONFIG_NFC_FDP=y
CONFIG_NFC_FDP_I2C=y
CONFIG_NFC_PN533=y
CONFIG_NFC_PN533_I2C=y
CONFIG_NFC_PN532_UART=y
CONFIG_NFC_ST_NCI=y
# CONFIG_NFC_ST_NCI_I2C is not set
CONFIG_NFC_ST_NCI_SPI=y
# CONFIG_NFC_NXP_NCI is not set
CONFIG_NFC_S3FWRN5=y
CONFIG_NFC_S3FWRN5_I2C=y
CONFIG_NFC_S3FWRN82_UART=y
# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=y
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEFAULT is not set
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
CONFIG_PCIEASPM_PERFORMANCE=y
CONFIG_PCIE_PTM=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_DOE=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
# CONFIG_VGA_ARB is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# PCI controller drivers
#
# CONFIG_PCIE_XILINX_NWL is not set
# CONFIG_PCI_TEGRA is not set
# CONFIG_PCIE_RCAR_HOST is not set
# CONFIG_PCIE_XILINX is not set
# CONFIG_PCIE_XILINX_CPM is not set
# CONFIG_PCI_XGENE is not set
# CONFIG_PCI_VERSATILE is not set
# CONFIG_PCIE_ALTERA is not set
# CONFIG_PCI_HOST_THUNDER_PEM is not set
# CONFIG_PCI_HOST_THUNDER_ECAM is not set
# CONFIG_PCIE_MEDIATEK_GEN3 is not set
CONFIG_PCI_LOONGSON=y
# CONFIG_PCIE_MT7621 is not set

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_EXYNOS is not set
# CONFIG_PCI_IMX6 is not set
# CONFIG_PCIE_SPEAR13XX is not set
# CONFIG_PCI_KEYSTONE_HOST is not set
# CONFIG_PCIE_ARMADA_8K is not set
# CONFIG_PCIE_ARTPEC6_HOST is not set
# CONFIG_PCIE_KEEMBAY_HOST is not set
# CONFIG_PCIE_HISI_STB is not set
# CONFIG_PCI_MESON is not set
# CONFIG_PCIE_TEGRA194_HOST is not set
# CONFIG_PCIE_VISCONTI_HOST is not set
# CONFIG_PCIE_FU740 is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

CONFIG_CXL_BUS=y
CONFIG_CXL_PCI=y
CONFIG_CXL_MEM_RAW_COMMANDS=y
CONFIG_CXL_ACPI=y
CONFIG_CXL_MEM=y
CONFIG_CXL_PORT=y
CONFIG_CXL_REGION=y
# CONFIG_CXL_REGION_INVALIDATION_TEST is not set
# CONFIG_PCCARD is not set
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
# CONFIG_RAPIDIO_DMA_ENGINE is not set
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=y
# CONFIG_RAPIDIO_CHMAN is not set
CONFIG_RAPIDIO_MPORT_CDEV=y

#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_RXS_GEN3=y
# end of RapidIO Switch drivers

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
# CONFIG_FW_LOADER_COMPRESS_XZ is not set
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_HMEM_REPORTING=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_HISILICON_LPC is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
# CONFIG_MHI_BUS_PCI_GENERIC is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

#
# EFI (Extensible Firmware Interface) Support
#
# end of EFI (Extensible Firmware Interface) Support

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
CONFIG_MTD=y

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
# CONFIG_MTD_BCM63XX_PARTS is not set
# CONFIG_MTD_BRCM_U_BOOT is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_PARSER_IMAGETAG is not set
# CONFIG_MTD_PARSER_TPLINK_SAFELOADER is not set
# CONFIG_MTD_PARSER_TRX is not set
# CONFIG_MTD_SHARPSL_PARTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=y
CONFIG_MTD_PARTITIONED_MASTER=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_PCI=y
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_MCHP23K256=y
CONFIG_MTD_MCHP48L640=y
CONFIG_MTD_SPEAR_SMI=y
# CONFIG_MTD_SST25L is not set
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
# CONFIG_MTD_ONENAND_SAMSUNG is not set
CONFIG_MTD_ONENAND_OTP=y
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
CONFIG_MTD_RAW_NAND=y

#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_AMS_DELTA=y
# CONFIG_MTD_NAND_SHARPSL is not set
CONFIG_MTD_NAND_CAFE=y
# CONFIG_MTD_NAND_ATMEL is not set
# CONFIG_MTD_NAND_MARVELL is not set
# CONFIG_MTD_NAND_SLC_LPC32XX is not set
# CONFIG_MTD_NAND_MLC_LPC32XX is not set
# CONFIG_MTD_NAND_BRCMNAND is not set
# CONFIG_MTD_NAND_OXNAS is not set
# CONFIG_MTD_NAND_FSL_IFC is not set
# CONFIG_MTD_NAND_VF610_NFC is not set
# CONFIG_MTD_NAND_SH_FLCTL is not set
# CONFIG_MTD_NAND_DAVINCI is not set
# CONFIG_MTD_NAND_TXX9NDFMC is not set
# CONFIG_MTD_NAND_SUNXI is not set
# CONFIG_MTD_NAND_HISI504 is not set
# CONFIG_MTD_NAND_QCOM is not set
# CONFIG_MTD_NAND_MXIC is not set
# CONFIG_MTD_NAND_TEGRA is not set
# CONFIG_MTD_NAND_STM32_FMC2 is not set
# CONFIG_MTD_NAND_MESON is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_ARASAN=y
# CONFIG_MTD_NAND_RENESAS is not set

#
# Misc
#
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_RICOH is not set
CONFIG_MTD_NAND_DISKONCHIP=y
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
# CONFIG_MTD_SPI_NAND is not set

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
# CONFIG_MTD_NAND_ECC_SW_BCH is not set
CONFIG_MTD_NAND_ECC_MXIC=y
# CONFIG_MTD_NAND_ECC_MEDIATEK is not set
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers

CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
CONFIG_MTD_SPI_NOR_SWP_DISABLE=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE is not set
# CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
# CONFIG_SPI_HISI_SFC is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_MTD_HYPERBUS=y
# CONFIG_HBMC_AM654 is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPACPI=y

#
# NVME Support
#
# end of NVME Support

#
# Misc devices
#
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
# CONFIG_AD525X_DPOT_SPI is not set
CONFIG_DUMMY_IRQ=y
CONFIG_PHANTOM=y
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_SMPRO_ERRMON is not set
# CONFIG_SMPRO_MISC is not set
# CONFIG_GEHC_ACHC is not set
# CONFIG_HP_ILO is not set
# CONFIG_QCOM_COINCELL is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
CONFIG_DW_XDATA_PCIE=y
# CONFIG_PCI_ENDPOINT_TEST is not set
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_C2PORT=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=y
# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

CONFIG_ALTERA_STAPL=y
CONFIG_GENWQE=y
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_ECHO=y
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
CONFIG_MISC_RTSX_PCI=y
CONFIG_HABANA_AI=y
CONFIG_UACCE=y
# CONFIG_PVPANIC is not set
CONFIG_GP_PCI1XXXX=y
# end of Misc devices

#
# SCSI device support
#
# end of SCSI device support

# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_FIREWIRE_NOSY=y
# end of IEEE 1394 (FireWire) support

# CONFIG_NETDEVICES is not set

#
# Input device support
#
# CONFIG_INPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=y
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_SERIO_SUN4I_PS2 is not set
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
# CONFIG_TTY is not set
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not set
# CONFIG_SSIF_IPMI_BMC is not set
CONFIG_IPMB_DEVICE_INTERFACE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_APPLICOM is not set
# CONFIG_DEVMEM is not set
# CONFIG_DEVPORT is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS_SPI=y
# CONFIG_TCG_TIS_SPI_CR50 is not set
CONFIG_TCG_TIS_I2C=y
# CONFIG_TCG_TIS_SYNQUACER is not set
CONFIG_TCG_TIS_I2C_CR50=y
# CONFIG_TCG_TIS_I2C_ATMEL is not set
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
# CONFIG_TCG_ATMEL is not set
CONFIG_TCG_INFINEON=y
CONFIG_TCG_CRB=y
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
# CONFIG_XILLYBUS is not set
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support

# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_AMD_MP2=y
# CONFIG_I2C_HIX5HD2 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NVIDIA_GPU=y
CONFIG_I2C_SIS5595=y
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
CONFIG_I2C_SCMI=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_ASPEED is not set
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
# CONFIG_I2C_BCM2835 is not set
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set
CONFIG_I2C_BRCMSTB=y
# CONFIG_I2C_CADENCE is not set
CONFIG_I2C_CBUS_GPIO=y
# CONFIG_I2C_DAVINCI is not set
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_DIGICOLOR is not set
# CONFIG_I2C_EG20T is not set
CONFIG_I2C_EMEV2=y
CONFIG_I2C_GPIO=y
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMG is not set
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_IOP3XX is not set
# CONFIG_I2C_JZ4780 is not set
CONFIG_I2C_KEMPLD=y
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NPCM is not set
CONFIG_I2C_OCORES=y
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
# CONFIG_I2C_APPLE is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PNX is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_QCOM_CCI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
# CONFIG_I2C_SH_MOBILE is not set
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_SPRD is not set
# CONFIG_I2C_ST is not set
# CONFIG_I2C_STM32F4 is not set
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_SUN6I_P2WI is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
# CONFIG_I2C_VERSATILE is not set
# CONFIG_I2C_WMT is not set
# CONFIG_I2C_THUNDERX is not set
CONFIG_I2C_XILINX=y
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PCI1XXXX=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support

CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
# CONFIG_I2C_SLAVE_TESTUNIT is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_ALTERA_CORE is not set
# CONFIG_SPI_AR934X is not set
# CONFIG_SPI_ATH79 is not set
# CONFIG_SPI_ARMADA_3700 is not set
CONFIG_SPI_AXI_SPI_ENGINE=y
# CONFIG_SPI_BCM2835 is not set
# CONFIG_SPI_BCM2835AUX is not set
# CONFIG_SPI_BCM63XX is not set
# CONFIG_SPI_BCM63XX_HSSPI is not set
# CONFIG_SPI_BCM_QSPI is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_CADENCE=y
# CONFIG_SPI_CLPS711X is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_EP93XX is not set
# CONFIG_SPI_FSL_LPSPI is not set
# CONFIG_SPI_FSL_QUADSPI is not set
# CONFIG_SPI_GXP is not set
# CONFIG_SPI_HISI_KUNPENG is not set
# CONFIG_SPI_HISI_SFC_V3XX is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_IMG_SPFI is not set
# CONFIG_SPI_IMX is not set
# CONFIG_SPI_INGENIC is not set
# CONFIG_SPI_INTEL_PCI is not set
# CONFIG_SPI_INTEL_PLATFORM is not set
# CONFIG_SPI_LP8841_RTC is not set
# CONFIG_SPI_FSL_DSPI is not set
# CONFIG_SPI_MESON_SPICC is not set
# CONFIG_SPI_MESON_SPIFC is not set
CONFIG_SPI_MICROCHIP_CORE=y
CONFIG_SPI_MICROCHIP_CORE_QSPI=y
# CONFIG_SPI_MT65XX is not set
# CONFIG_SPI_MT7621 is not set
# CONFIG_SPI_MTK_NOR is not set
# CONFIG_SPI_WPCM_FIU is not set
# CONFIG_SPI_NPCM_PSPI is not set
# CONFIG_SPI_LANTIQ_SSC is not set
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_OMAP24XX is not set
# CONFIG_SPI_TI_QSPI is not set
# CONFIG_SPI_OMAP_100K is not set
# CONFIG_SPI_ORION is not set
# CONFIG_SPI_PCI1XXXX is not set
# CONFIG_SPI_PIC32 is not set
# CONFIG_SPI_PIC32_SQI is not set
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_ROCKCHIP=y
# CONFIG_SPI_ROCKCHIP_SFC is not set
# CONFIG_SPI_RSPI is not set
# CONFIG_SPI_QUP is not set
# CONFIG_SPI_S3C64XX is not set
CONFIG_SPI_SC18IS602=y
# CONFIG_SPI_SH_MSIOF is not set
# CONFIG_SPI_SH is not set
# CONFIG_SPI_SH_HSPI is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_SPRD is not set
# CONFIG_SPI_SPRD_ADI is not set
# CONFIG_SPI_STM32 is not set
# CONFIG_SPI_ST_SSC4 is not set
# CONFIG_SPI_SUN4I is not set
# CONFIG_SPI_SUN6I is not set
# CONFIG_SPI_SUNPLUS_SP7021 is not set
# CONFIG_SPI_SYNQUACER is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_TEGRA210_QUAD is not set
# CONFIG_SPI_TEGRA114 is not set
# CONFIG_SPI_TEGRA20_SFLASH is not set
# CONFIG_SPI_TEGRA20_SLINK is not set
# CONFIG_SPI_THUNDERX is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
CONFIG_SPI_XCOMM=y
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_XLP is not set
# CONFIG_SPI_XTENSA_XTFPGA is not set
# CONFIG_SPI_ZYNQ_QSPI is not set
CONFIG_SPI_ZYNQMP_GQSPI=y
CONFIG_SPI_AMD=y

#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=y

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=y
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=y
# CONFIG_SPMI_HISI3670 is not set
# CONFIG_SPMI_MSM_PMIC_ARB is not set
# CONFIG_SPMI_MTK_PMIF is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
CONFIG_NTP_PPS=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_PTP_1588_CLOCK_DTE=y
CONFIG_PTP_1588_CLOCK_QORIQ=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_PTP_1588_CLOCK_IDT82P33=y
CONFIG_PTP_1588_CLOCK_IDTCM=y
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_CY8C95X0=y
# CONFIG_PINCTRL_MCP23S08 is not set
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L92=y

#
# Intel pinctrl drivers
#
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_LYNXPOINT is not set
# CONFIG_PINCTRL_ALDERLAKE is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_ELKHARTLAKE is not set
# CONFIG_PINCTRL_EMMITSBURG is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
# CONFIG_PINCTRL_LAKEFIELD is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_METEORLAKE is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
# CONFIG_PINCTRL_TIGERLAKE is not set
# end of Intel pinctrl drivers

#
# MediaTek pinctrl drivers
#
# CONFIG_EINT_MTK is not set
# end of MediaTek pinctrl drivers

# CONFIG_PINCTRL_PXA25X is not set
# CONFIG_PINCTRL_PXA27X is not set
# CONFIG_PINCTRL_MSM is not set
# CONFIG_PINCTRL_LPASS_LPI is not set

#
# Renesas pinctrl drivers
#
# CONFIG_PINCTRL_RENESAS is not set
# CONFIG_PINCTRL_PFC_EMEV2 is not set
# CONFIG_PINCTRL_PFC_R8A77995 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not set
# CONFIG_PINCTRL_PFC_R8A77990 is not set
# CONFIG_PINCTRL_PFC_R8A7779 is not set
# CONFIG_PINCTRL_PFC_R8A7790 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
# CONFIG_PINCTRL_PFC_R8A77965 is not set
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
# CONFIG_PINCTRL_PFC_R8A7792 is not set
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
# CONFIG_PINCTRL_PFC_R8A7745 is not set
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
# CONFIG_PINCTRL_PFC_R8A774C0 is not set
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
# CONFIG_PINCTRL_PFC_SH7786 is not set
# CONFIG_PINCTRL_PFC_SH73A0 is not set
# CONFIG_PINCTRL_PFC_SH7723 is not set
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
# CONFIG_GPIO_CDEV_V1 is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
CONFIG_GPIO_IDIO_16=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_AMDPT=y
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_CLPS711X is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_HISI is not set
# CONFIG_GPIO_IOP is not set
# CONFIG_GPIO_MB86S7X is not set
CONFIG_GPIO_MENZ127=y
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MXC is not set
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_ROCKCHIP is not set
# CONFIG_GPIO_SIOX is not set
# CONFIG_GPIO_THUNDERX is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_XGENE_SB is not set
# CONFIG_GPIO_XLP is not set
CONFIG_GPIO_AMD_FCH=y
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
# CONFIG_GPIO_PCA9570 is not set
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# CONFIG_GPIO_ARIZONA is not set
CONFIG_GPIO_BD9571MWV=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
# CONFIG_GPIO_JANZ_TTL is not set
# CONFIG_GPIO_KEMPLD is not set
CONFIG_GPIO_LP3943=y
CONFIG_GPIO_MADERA=y
# CONFIG_GPIO_SL28CPLD is not set
# CONFIG_GPIO_TPS65086 is not set
CONFIG_GPIO_TPS6586X=y
# CONFIG_GPIO_TPS65910 is not set
# CONFIG_GPIO_TPS65912 is not set
# CONFIG_GPIO_TQMX86 is not set
CONFIG_GPIO_TWL6040=y
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_MLXBF is not set
# CONFIG_GPIO_MLXBF2 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCH is not set
CONFIG_GPIO_PCI_IDIO_16=y
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
CONFIG_GPIO_MAX3191X=y
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=y
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
# CONFIG_GPIO_LATCH is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers

CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_MXC is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2406=y
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2805=y
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=y
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2438=y
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=y
# CONFIG_W1_SLAVE_DS2781 is not set
CONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves

# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_POWER_SUPPLY_HWMON is not set
CONFIG_PDA_POWER=y
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_IP5XXX_POWER is not set
CONFIG_TEST_POWER=y
CONFIG_CHARGER_ADP5061=y
# CONFIG_BATTERY_ACT8945A is not set
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
# CONFIG_BATTERY_BQ27XXX_HDQ is not set
CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
CONFIG_BATTERY_DA9052=y
CONFIG_BATTERY_DA9150=y
# CONFIG_CHARGER_AXP20X is not set
CONFIG_BATTERY_AXP20X=y
CONFIG_AXP20X_POWER=y
CONFIG_BATTERY_MAX17040=y
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_BATTERY_MAX1721X is not set
CONFIG_CHARGER_PCF50633=y
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_LP8727=y
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=y
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_MAX8997 is not set
CONFIG_CHARGER_MP2629=y
CONFIG_CHARGER_MT6360=y
CONFIG_CHARGER_MT6370=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ2515X is not set
CONFIG_CHARGER_BQ25890=y
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_CHARGER_SMB347 is not set
CONFIG_CHARGER_TPS65090=y
CONFIG_BATTERY_GAUGE_LTC2941=y
# CONFIG_BATTERY_GOLDFISH is not set
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
# CONFIG_CHARGER_SC2731 is not set
# CONFIG_FUEL_GAUGE_SC27XX is not set
CONFIG_CHARGER_BD99954=y
CONFIG_BATTERY_UG3105=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_AD7314=y
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7310=y
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_AXI_FAN_CONTROL=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_BT1_PVT is not set
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_SPARX5 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=y
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_FTSTEUTATES=y
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_G762=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LAN966X is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LTC2945=y
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC2992=y
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX127=y
CONFIG_SENSORS_MAX16065=y
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31722=y
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
CONFIG_SENSORS_MAX6620=y
CONFIG_SENSORS_MAX6621=y
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_TC654=y
CONFIG_SENSORS_TPS23861=y
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NCT7904=y
CONFIG_SENSORS_NPCM7XX=y
# CONFIG_SENSORS_OCC_P8_I2C is not set
CONFIG_SENSORS_PCF8591=y
# CONFIG_SENSORS_PECI_CPUTEMP is not set
CONFIG_SENSORS_PECI_DIMMTEMP=y
CONFIG_SENSORS_PECI=y
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
# CONFIG_SENSORS_SL28CPLD is not set
# CONFIG_SENSORS_SBTSI is not set
CONFIG_SENSORS_SBRMI=y
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
# CONFIG_SENSORS_SHT4x is not set
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SY7636A=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC2305=y
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=y
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
CONFIG_SENSORS_SCH5636=y
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_ADS7871=y
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=y
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_INA238=y
# CONFIG_SENSORS_INA3221 is not set
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP108=y
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
# CONFIG_SENSORS_TMP464 is not set
CONFIG_SENSORS_TMP513=y
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83773G=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=y
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=y

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_STEP_WISE is not set
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_K3_THERMAL is not set
# CONFIG_ROCKCHIP_THERMAL is not set
# CONFIG_RCAR_THERMAL is not set
CONFIG_MTK_THERMAL=y

#
# Intel thermal drivers
#

#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers

#
# Broadcom thermal drivers
#
# CONFIG_BRCMSTB_THERMAL is not set
# CONFIG_BCM_NS_THERMAL is not set
# CONFIG_BCM_SR_THERMAL is not set
# end of Broadcom thermal drivers

#
# Texas Instruments thermal drivers
#
# CONFIG_TI_SOC_THERMAL is not set
# end of Texas Instruments thermal drivers

#
# Samsung thermal drivers
#
# end of Samsung thermal drivers

#
# NVIDIA Tegra thermal drivers
#
# CONFIG_TEGRA_SOCTHERM is not set
# CONFIG_TEGRA_BPMP_THERMAL is not set
# CONFIG_TEGRA30_TSENSOR is not set
# end of NVIDIA Tegra thermal drivers

CONFIG_GENERIC_ADC_THERMAL=y

#
# Qualcomm thermal drivers
#
# end of Qualcomm thermal drivers

# CONFIG_SPRD_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is not set
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=y
# CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP is not set
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_DA9052_WATCHDOG=y
CONFIG_DA9055_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=y
# CONFIG_DA9062_WATCHDOG is not set
CONFIG_MENF21BMC_WATCHDOG=y
# CONFIG_MENZ069_WATCHDOG is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_RAVE_SP_WATCHDOG is not set
# CONFIG_SL28CPLD_WATCHDOG is not set
# CONFIG_ARMADA_37XX_WATCHDOG is not set
# CONFIG_AT91RM9200_WATCHDOG is not set
# CONFIG_AT91SAM9X_WATCHDOG is not set
# CONFIG_SAMA5D4_WATCHDOG is not set
CONFIG_CADENCE_WATCHDOG=y
# CONFIG_FTWDT010_WATCHDOG is not set
# CONFIG_S3C2410_WATCHDOG is not set
CONFIG_DW_WATCHDOG=y
# CONFIG_EP93XX_WATCHDOG is not set
# CONFIG_OMAP_WATCHDOG is not set
# CONFIG_PNX4008_WATCHDOG is not set
# CONFIG_DAVINCI_WATCHDOG is not set
# CONFIG_K3_RTI_WATCHDOG is not set
# CONFIG_RN5T618_WATCHDOG is not set
# CONFIG_SUNXI_WATCHDOG is not set
# CONFIG_NPCM7XX_WATCHDOG is not set
# CONFIG_STMP3XXX_RTC_WATCHDOG is not set
# CONFIG_TS72XX_WATCHDOG is not set
CONFIG_MAX63XX_WATCHDOG=y
# CONFIG_MAX77620_WATCHDOG is not set
# CONFIG_IMX2_WDT is not set
# CONFIG_IMX7ULP_WDT is not set
CONFIG_RETU_WATCHDOG=y
# CONFIG_MOXART_WDT is not set
# CONFIG_TEGRA_WATCHDOG is not set
# CONFIG_QCOM_WDT is not set
# CONFIG_MESON_GXBB_WATCHDOG is not set
# CONFIG_MESON_WATCHDOG is not set
# CONFIG_MEDIATEK_WATCHDOG is not set
# CONFIG_DIGICOLOR_WATCHDOG is not set
# CONFIG_LPC18XX_WATCHDOG is not set
# CONFIG_RENESAS_WDT is not set
# CONFIG_RENESAS_RZAWDT is not set
# CONFIG_RENESAS_RZN1WDT is not set
# CONFIG_RENESAS_RZG2LWDT is not set
# CONFIG_ASPEED_WATCHDOG is not set
# CONFIG_REALTEK_OTTO_WDT is not set
# CONFIG_SPRD_WATCHDOG is not set
# CONFIG_VISCONTI_WATCHDOG is not set
# CONFIG_MSC313E_WATCHDOG is not set
# CONFIG_APPLE_WATCHDOG is not set
# CONFIG_SUNPLUS_WATCHDOG is not set
CONFIG_ALIM7101_WDT=y
# CONFIG_SC520_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_KEMPLD_WDT=y
# CONFIG_RDC321X_WDT is not set
# CONFIG_BCM47XX_WDT is not set
# CONFIG_BCM_KONA_WDT is not set
# CONFIG_BCM7038_WDT is not set
# CONFIG_IMGPDC_WDT is not set
# CONFIG_MPC5200_WDT is not set
CONFIG_MEN_A21_WDT=y
# CONFIG_UML_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
CONFIG_WDTPCI=y
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_DRIVER_MIPS is not set
CONFIG_BCMA_SFLASH=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_SUN4I_GPADC is not set
CONFIG_MFD_AS3711=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_AT91_USART is not set
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
CONFIG_MFD_MADERA_SPI=y
# CONFIG_MFD_CS47L15 is not set
# CONFIG_MFD_CS47L35 is not set
# CONFIG_MFD_CS47L85 is not set
# CONFIG_MFD_CS47L90 is not set
CONFIG_MFD_CS47L92=y
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
# CONFIG_MFD_DA9062 is not set
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
# CONFIG_MFD_ENE_KB3930 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_MFD_MP2629=y
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
# CONFIG_HTC_PASIC3 is not set
CONFIG_HTC_I2CPLD=y
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
# CONFIG_MFD_IQS62X is not set
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6360=y
CONFIG_MFD_MT6370=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
CONFIG_MFD_OCELOT=y
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
# CONFIG_MFD_NTXEC is not set
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
# CONFIG_MFD_PM8XXX is not set
CONFIG_MFD_SY7636A=y
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RT4831=y
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RT5120=y
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=y
# CONFIG_MFD_SL28CPLD is not set
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
CONFIG_MFD_SKY81452=y
# CONFIG_MFD_SC27XX_PMIC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=y
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TI_LP873X is not set
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_MFD_TQMX86=y
# CONFIG_MFD_VX855 is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
# CONFIG_MFD_WM8998 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_STW481X is not set
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
# CONFIG_MFD_STMFX is not set
CONFIG_MFD_WCD934X=y
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
CONFIG_RAVE_SP_CORE=y
# CONFIG_MFD_INTEL_M10_BMC is not set
# end of Multifunction device drivers

CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PG86X is not set
CONFIG_REGULATOR_88PM800=y
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=y
# CONFIG_REGULATOR_AS3711 is not set
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_BD9571MWV=y
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_DA9055=y
CONFIG_REGULATOR_DA9210=y
# CONFIG_REGULATOR_DA9211 is not set
CONFIG_REGULATOR_FAN53555=y
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL9305 is not set
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LM363X=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP8788=y
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_LTC3676=y
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX77620 is not set
# CONFIG_REGULATOR_MAX77650 is not set
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8997=y
# CONFIG_REGULATOR_MAX20086 is not set
# CONFIG_REGULATOR_MAX77686 is not set
CONFIG_REGULATOR_MAX77693=y
# CONFIG_REGULATOR_MAX77802 is not set
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
# CONFIG_REGULATOR_MC13783 is not set
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6315=y
# CONFIG_REGULATOR_MT6323 is not set
# CONFIG_REGULATOR_MT6331 is not set
# CONFIG_REGULATOR_MT6332 is not set
# CONFIG_REGULATOR_MT6357 is not set
CONFIG_REGULATOR_MT6358=y
CONFIG_REGULATOR_MT6359=y
# CONFIG_REGULATOR_MT6360 is not set
CONFIG_REGULATOR_MT6370=y
CONFIG_REGULATOR_MT6397=y
# CONFIG_REGULATOR_PBIAS is not set
# CONFIG_REGULATOR_PCA9450 is not set
CONFIG_REGULATOR_PCF50633=y
# CONFIG_REGULATOR_PV88060 is not set
CONFIG_REGULATOR_PV88080=y
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
# CONFIG_REGULATOR_QCOM_RPMH is not set
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_QCOM_USB_VBUS=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT4831=y
CONFIG_REGULATOR_RT5120=y
CONFIG_REGULATOR_RT5190A=y
CONFIG_REGULATOR_RT5759=y
CONFIG_REGULATOR_RT6160=y
# CONFIG_REGULATOR_RT6190 is not set
CONFIG_REGULATOR_RT6245=y
# CONFIG_REGULATOR_RTQ2134 is not set
CONFIG_REGULATOR_RTMV20=y
CONFIG_REGULATOR_RTQ6752=y
# CONFIG_REGULATOR_S2MPA01 is not set
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_SC2731 is not set
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_SLG51000=y
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
# CONFIG_REGULATOR_STM32_PWR is not set
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not set
CONFIG_REGULATOR_SY7636A=y
# CONFIG_REGULATOR_TPS51632 is not set
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65132=y
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=y
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_TPS68470 is not set
CONFIG_REGULATOR_QCOM_LABIBB=y

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_VIDEO_NOMODESET=y
# CONFIG_IMX_IPUV3_CORE is not set
# CONFIG_DRM is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set

#
# ARM devices
#
# end of ARM devices

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
# CONFIG_FB_CLPS711X is not set
# CONFIG_FB_IMX is not set
CONFIG_FB_CYBER2000=y
CONFIG_FB_CYBER2000_DDC=y
# CONFIG_FB_ARC is not set
# CONFIG_FB_CONTROL is not set
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_GBE is not set
# CONFIG_FB_PVR2 is not set
# CONFIG_FB_OPENCORES is not set
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
# CONFIG_FB_ATY_CT is not set
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_BACKLIGHT is not set
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
# CONFIG_FB_SIS_315 is not set
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=y
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=y
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=y
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_WM8505 is not set
# CONFIG_FB_PXA168 is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_SH_MOBILE_LCDC is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_S3C is not set
CONFIG_FB_SM501=y
CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_DA8XX is not set
CONFIG_FB_VIRTUAL=y
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_SIMPLE=y
CONFIG_FB_SSD1307=y
CONFIG_FB_SM712=y
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
# CONFIG_BACKLIGHT_OMAP1 is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA9052=y
CONFIG_BACKLIGHT_MT6370=y
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_RT4831=y
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
# CONFIG_BACKLIGHT_PCF50633 is not set
CONFIG_BACKLIGHT_AAT2870=y
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_LP8788=y
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=y
# CONFIG_BACKLIGHT_RAVE_SP is not set
# end of Backlight & LCD device support

CONFIG_VGASTATE=y
# CONFIG_LOGO is not set
# end of Graphics support

CONFIG_SOUND=y
# CONFIG_SND is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_CLASS_MULTICOLOR=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
# CONFIG_LEDS_ARIEL is not set
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3532=y
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_MT6323=y
# CONFIG_LEDS_S3C24XX is not set
# CONFIG_LEDS_COBALT_QUBE is not set
# CONFIG_LEDS_COBALT_RAQ is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
# CONFIG_LEDS_LP50XX is not set
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=y
CONFIG_LEDS_PCA963X=y
# CONFIG_LEDS_DA9052 is not set
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_MC13783 is not set
CONFIG_LEDS_NS2=y
CONFIG_LEDS_TCA6507=y
# CONFIG_LEDS_TLC591XX is not set
CONFIG_LEDS_MAX8997=y
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_MENF21BMC=y
CONFIG_LEDS_IS31FL319X=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_MLXREG=y
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_TI_LMU_COMMON=y
CONFIG_LEDS_LM36274=y
# CONFIG_LEDS_TPS6105X is not set
# CONFIG_LEDS_IP30 is not set

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#
# CONFIG_LEDS_PWM_MULTICOLOR is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y

#
# Speakup console speech
#
# end of Speakup console speech

CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
# CONFIG_RTC_NVMEM is not set

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM80X=y
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
CONFIG_RTC_DRV_ABX80X=y
# CONFIG_RTC_DRV_BRCMSTB is not set
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_LP8788=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8997=y
# CONFIG_RTC_DRV_MAX77686 is not set
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF85063=y
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TPS6586X=y
# CONFIG_RTC_DRV_TPS65910 is not set
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_RX8025 is not set
CONFIG_RTC_DRV_EM3027=y
# CONFIG_RTC_DRV_RV3028 is not set
CONFIG_RTC_DRV_RV3032=y
CONFIG_RTC_DRV_RV8803=y
# CONFIG_RTC_DRV_S5M is not set
CONFIG_RTC_DRV_SD3078=y

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=y
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1302=y
CONFIG_RTC_DRV_DS1305=y
# CONFIG_RTC_DRV_DS1343 is not set
CONFIG_RTC_DRV_DS1347=y
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RX4581=y
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_PCF2123=y
CONFIG_RTC_DRV_MCP795=y
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_DS3232_HWMON=y
CONFIG_RTC_DRV_PCF2127=y
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=y
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_STK17TA8=y
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_GAMECUBE is not set
# CONFIG_RTC_DRV_SC27XX is not set
CONFIG_RTC_DRV_SPEAR=y
CONFIG_RTC_DRV_PCF50633=y

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_ASM9260 is not set
# CONFIG_RTC_DRV_DAVINCI is not set
# CONFIG_RTC_DRV_DIGICOLOR is not set
# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
# CONFIG_RTC_DRV_MESON is not set
# CONFIG_RTC_DRV_MESON_VRTC is not set
# CONFIG_RTC_DRV_S3C is not set
# CONFIG_RTC_DRV_EP93XX is not set
# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_RTC_DRV_VT8500 is not set
# CONFIG_RTC_DRV_SUN6I is not set
# CONFIG_RTC_DRV_SUNXI is not set
# CONFIG_RTC_DRV_MV is not set
CONFIG_RTC_DRV_FTRTC010=y
# CONFIG_RTC_DRV_STMP is not set
# CONFIG_RTC_DRV_MC13XXX is not set
# CONFIG_RTC_DRV_LPC32XX is not set
# CONFIG_RTC_DRV_PM8XXX is not set
# CONFIG_RTC_DRV_TEGRA is not set
# CONFIG_RTC_DRV_MOXART is not set
# CONFIG_RTC_DRV_MT2712 is not set
CONFIG_RTC_DRV_MT6397=y
# CONFIG_RTC_DRV_MT7622 is not set
# CONFIG_RTC_DRV_XGENE is not set
# CONFIG_RTC_DRV_STM32 is not set
# CONFIG_RTC_DRV_RTD119X is not set
# CONFIG_RTC_DRV_TI_K3 is not set

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_GOLDFISH=y
# CONFIG_RTC_DRV_MSC313 is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
# CONFIG_DMADEVICES_VDEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_ALTERA_MSGDMA=y
# CONFIG_APPLE_ADMAC is not set
# CONFIG_AXI_DMAC is not set
# CONFIG_DMA_JZ4780 is not set
# CONFIG_DMA_SA11X0 is not set
# CONFIG_DMA_SUN6I is not set
# CONFIG_EP93XX_DMA is not set
# CONFIG_HISI_DMA is not set
# CONFIG_IMG_MDC_DMA is not set
CONFIG_INTEL_IDMA64=y
# CONFIG_INTEL_IOP_ADMA is not set
# CONFIG_K3_DMA is not set
# CONFIG_MCF_EDMA is not set
# CONFIG_MMP_PDMA is not set
# CONFIG_MMP_TDMA is not set
# CONFIG_MV_XOR is not set
# CONFIG_MXS_DMA is not set
# CONFIG_NBPFAXI_DMA is not set
# CONFIG_PCH_DMA is not set
CONFIG_PLX_DMA=y
# CONFIG_STM32_DMA is not set
# CONFIG_STM32_DMAMUX is not set
# CONFIG_SPRD_DMA is not set
# CONFIG_S3C24XX_DMAC is not set
# CONFIG_TEGRA186_GPC_DMA is not set
# CONFIG_TEGRA20_APB_DMA is not set
# CONFIG_TEGRA210_ADMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_XGENE_DMA is not set
# CONFIG_XILINX_ZYNQMP_DMA is not set
# CONFIG_MTK_HSDMA is not set
# CONFIG_MTK_CQDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
# CONFIG_RZN1_DMAMUX is not set
CONFIG_DW_DMAC_PCI=y
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
# CONFIG_SF_PDMA is not set
CONFIG_RENESAS_DMA=y
CONFIG_SH_DMAE_BASE=y
# CONFIG_SH_DMAE is not set
# CONFIG_RCAR_DMAC is not set
# CONFIG_RENESAS_USB_DMAC is not set
# CONFIG_RZ_DMAC is not set
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_TI_DMA_CROSSBAR=y
# CONFIG_INTEL_LDMA is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_UDMABUF is not set
CONFIG_DMABUF_MOVE_NOTIFY=y
# CONFIG_DMABUF_DEBUG is not set
CONFIG_DMABUF_SELFTESTS=y
# CONFIG_DMABUF_HEAPS is not set
CONFIG_DMABUF_SYSFS_STATS=y
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=y
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
CONFIG_UIO_MF624=y
CONFIG_VFIO=y
CONFIG_VFIO_CONTAINER=y
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VFIO_PCI is not set
# CONFIG_VFIO_PLATFORM is not set
CONFIG_VFIO_MDEV=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_MENU=y
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

CONFIG_GREYBUS=y
CONFIG_COMEDI=y
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
# CONFIG_COMEDI_BOND is not set
# CONFIG_COMEDI_TEST is not set
CONFIG_COMEDI_PARPORT=y
# CONFIG_COMEDI_SSV_DNP is not set
CONFIG_COMEDI_ISA_DRIVERS=y
# CONFIG_COMEDI_PCL711 is not set
# CONFIG_COMEDI_PCL724 is not set
# CONFIG_COMEDI_PCL726 is not set
CONFIG_COMEDI_PCL730=y
CONFIG_COMEDI_PCL812=y
# CONFIG_COMEDI_PCL816 is not set
# CONFIG_COMEDI_PCL818 is not set
# CONFIG_COMEDI_PCM3724 is not set
CONFIG_COMEDI_AMPLC_DIO200_ISA=y
# CONFIG_COMEDI_AMPLC_PC236_ISA is not set
CONFIG_COMEDI_AMPLC_PC263_ISA=y
# CONFIG_COMEDI_RTI800 is not set
CONFIG_COMEDI_RTI802=y
CONFIG_COMEDI_DAC02=y
CONFIG_COMEDI_DAS16M1=y
# CONFIG_COMEDI_DAS08_ISA is not set
CONFIG_COMEDI_DAS16=y
CONFIG_COMEDI_DAS800=y
# CONFIG_COMEDI_DAS1800 is not set
# CONFIG_COMEDI_DAS6402 is not set
CONFIG_COMEDI_DT2801=y
# CONFIG_COMEDI_DT2811 is not set
CONFIG_COMEDI_DT2814=y
CONFIG_COMEDI_DT2815=y
# CONFIG_COMEDI_DT2817 is not set
CONFIG_COMEDI_DT282X=y
CONFIG_COMEDI_DMM32AT=y
CONFIG_COMEDI_FL512=y
CONFIG_COMEDI_AIO_AIO12_8=y
CONFIG_COMEDI_AIO_IIRO_16=y
CONFIG_COMEDI_II_PCI20KC=y
# CONFIG_COMEDI_C6XDIGIO is not set
CONFIG_COMEDI_MPC624=y
# CONFIG_COMEDI_ADQ12B is not set
# CONFIG_COMEDI_NI_AT_A2150 is not set
CONFIG_COMEDI_NI_AT_AO=y
CONFIG_COMEDI_NI_ATMIO=y
CONFIG_COMEDI_NI_ATMIO16D=y
CONFIG_COMEDI_NI_LABPC_ISA=y
CONFIG_COMEDI_PCMAD=y
CONFIG_COMEDI_PCMDA12=y
CONFIG_COMEDI_PCMMIO=y
# CONFIG_COMEDI_PCMUIO is not set
CONFIG_COMEDI_MULTIQ3=y
# CONFIG_COMEDI_S526 is not set
CONFIG_COMEDI_PCI_DRIVERS=y
CONFIG_COMEDI_8255_PCI=y
CONFIG_COMEDI_ADDI_WATCHDOG=y
CONFIG_COMEDI_ADDI_APCI_1032=y
CONFIG_COMEDI_ADDI_APCI_1500=y
CONFIG_COMEDI_ADDI_APCI_1516=y
# CONFIG_COMEDI_ADDI_APCI_1564 is not set
CONFIG_COMEDI_ADDI_APCI_16XX=y
CONFIG_COMEDI_ADDI_APCI_2032=y
CONFIG_COMEDI_ADDI_APCI_2200=y
CONFIG_COMEDI_ADDI_APCI_3120=y
CONFIG_COMEDI_ADDI_APCI_3501=y
CONFIG_COMEDI_ADDI_APCI_3XXX=y
CONFIG_COMEDI_ADL_PCI6208=y
CONFIG_COMEDI_ADL_PCI7X3X=y
# CONFIG_COMEDI_ADL_PCI8164 is not set
CONFIG_COMEDI_ADL_PCI9111=y
CONFIG_COMEDI_ADL_PCI9118=y
CONFIG_COMEDI_ADV_PCI1710=y
# CONFIG_COMEDI_ADV_PCI1720 is not set
CONFIG_COMEDI_ADV_PCI1723=y
# CONFIG_COMEDI_ADV_PCI1724 is not set
# CONFIG_COMEDI_ADV_PCI1760 is not set
CONFIG_COMEDI_ADV_PCI_DIO=y
CONFIG_COMEDI_AMPLC_DIO200_PCI=y
CONFIG_COMEDI_AMPLC_PC236_PCI=y
CONFIG_COMEDI_AMPLC_PC263_PCI=y
CONFIG_COMEDI_AMPLC_PCI224=y
CONFIG_COMEDI_AMPLC_PCI230=y
# CONFIG_COMEDI_CONTEC_PCI_DIO is not set
# CONFIG_COMEDI_DAS08_PCI is not set
CONFIG_COMEDI_DT3000=y
CONFIG_COMEDI_DYNA_PCI10XX=y
CONFIG_COMEDI_GSC_HPDI=y
CONFIG_COMEDI_MF6X4=y
CONFIG_COMEDI_ICP_MULTI=y
CONFIG_COMEDI_DAQBOARD2000=y
CONFIG_COMEDI_JR3_PCI=y
CONFIG_COMEDI_KE_COUNTER=y
# CONFIG_COMEDI_CB_PCIDAS64 is not set
# CONFIG_COMEDI_CB_PCIDAS is not set
CONFIG_COMEDI_CB_PCIDDA=y
# CONFIG_COMEDI_CB_PCIMDAS is not set
CONFIG_COMEDI_CB_PCIMDDA=y
CONFIG_COMEDI_ME4000=y
# CONFIG_COMEDI_ME_DAQ is not set
CONFIG_COMEDI_NI_6527=y
CONFIG_COMEDI_NI_65XX=y
# CONFIG_COMEDI_NI_660X is not set
# CONFIG_COMEDI_NI_670X is not set
# CONFIG_COMEDI_NI_LABPC_PCI is not set
CONFIG_COMEDI_NI_PCIDIO=y
# CONFIG_COMEDI_NI_PCIMIO is not set
CONFIG_COMEDI_RTD520=y
CONFIG_COMEDI_S626=y
CONFIG_COMEDI_MITE=y
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
CONFIG_COMEDI_KCOMEDILIB=y
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
CONFIG_COMEDI_TESTS=y
CONFIG_COMEDI_TESTS_EXAMPLE=y
CONFIG_COMEDI_TESTS_NI_ROUTES=y
# CONFIG_STAGING is not set
CONFIG_LOONGARCH_PLATFORM_DEVICES=y
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_AGGREGATOR is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
# CONFIG_CLK_SP810 is not set
# end of Clock driver for ARM Reference designs

# CONFIG_CLK_HSDK is not set
CONFIG_LMK04832=y
# CONFIG_COMMON_CLK_APPLE_NCO is not set
# CONFIG_COMMON_CLK_MAX77686 is not set
CONFIG_COMMON_CLK_MAX9485=y
# CONFIG_COMMON_CLK_HI655X is not set
# CONFIG_COMMON_CLK_SCMI is not set
# CONFIG_COMMON_CLK_SCPI is not set
# CONFIG_COMMON_CLK_SI5341 is not set
CONFIG_COMMON_CLK_SI5351=y
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_BM1880 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_TPS68470 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_ASPEED is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
CONFIG_CLK_TWL6040=y
# CONFIG_CLK_LS1028A_PLLDIG is not set
# CONFIG_COMMON_CLK_XGENE is not set
CONFIG_COMMON_CLK_PWM=y
# CONFIG_COMMON_CLK_OXNAS is not set
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
# CONFIG_CLK_BCM_CYGNUS is not set
# CONFIG_CLK_BCM_HR2 is not set
# CONFIG_CLK_BCM_NSP is not set
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
# CONFIG_COMMON_CLK_HI3798CV200 is not set
# CONFIG_COMMON_CLK_HI6220 is not set
# CONFIG_RESET_HISI is not set
# CONFIG_COMMON_CLK_BOSTON is not set
# CONFIG_MXC_CLK is not set
# CONFIG_CLK_IMX8MM is not set
# CONFIG_CLK_IMX8MN is not set
# CONFIG_CLK_IMX8MP is not set
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set

#
# Ingenic SoCs drivers
#
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4755 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
# CONFIG_INGENIC_CGU_JZ4760 is not set
# CONFIG_INGENIC_CGU_JZ4770 is not set
# CONFIG_INGENIC_CGU_JZ4780 is not set
# CONFIG_INGENIC_CGU_X1000 is not set
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers

# CONFIG_TI_SYSCON_CLK is not set

#
# Clock driver for MediaTek SoC
#
# CONFIG_COMMON_CLK_MEDIATEK_FHCTL is not set
# CONFIG_COMMON_CLK_MT2701 is not set
# CONFIG_COMMON_CLK_MT2712 is not set
# CONFIG_COMMON_CLK_MT6765 is not set
# CONFIG_COMMON_CLK_MT6779 is not set
# CONFIG_COMMON_CLK_MT6795 is not set
# CONFIG_COMMON_CLK_MT6797 is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8365 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC

#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms

# CONFIG_MSTAR_MSC313_CPUPLL is not set
# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
# CONFIG_COMMON_CLK_SAMSUNG is not set
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_XILINX_VCU is not set
# CONFIG_COMMON_CLK_ZYNQMP is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
# CONFIG_DW_APB_TIMER is not set
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_IXP4XX_TIMER is not set
# CONFIG_MESON6_TIMER is not set
# CONFIG_OWL_TIMER is not set
# CONFIG_RDA_TIMER is not set
# CONFIG_SUN4I_TIMER is not set
# CONFIG_SUN5I_HSTIMER is not set
# CONFIG_TEGRA_TIMER is not set
# CONFIG_TEGRA186_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_CADENCE_TTC_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_CLKSRC_TI_32K is not set
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_CLKSRC_MPS2 is not set
# CONFIG_ARC_TIMERS is not set
# CONFIG_ARM_TIMER_SP804 is not set
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_ATMEL_ST is not set
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not set
# CONFIG_MTK_TIMER is not set
# CONFIG_SPRD_TIMER is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_CLKSRC_PXA is not set
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_INGENIC_TIMER is not set
# CONFIG_INGENIC_SYSOST is not set
# CONFIG_INGENIC_OST is not set
# CONFIG_MICROCHIP_PIT64B is not set
# CONFIG_GOLDFISH_TIMER is not set
# end of Clock Source drivers

# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# CONFIG_REMOTEPROC_CDEV is not set
# CONFIG_INGENIC_VPU_RPROC is not set
# CONFIG_MTK_SCP is not set
# CONFIG_MESON_MX_AO_ARC_REMOTEPROC is not set
# CONFIG_RCAR_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=y

#
# SoundWire Devices
#

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers

#
# Apple SoC drivers
#
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers

#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers

# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set

#
# Broadcom SoC drivers
#
# CONFIG_SOC_BCM63XX is not set
# CONFIG_SOC_BRCMSTB is not set
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not set
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

# CONFIG_LOONGSON2_GUTS is not set

#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers

#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers

# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
CONFIG_SOC_TI=y
# CONFIG_UX500_SOC_ID is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_GPIO=y
# CONFIG_EXTCON_INTEL_INT3496 is not set
# CONFIG_EXTCON_MAX3355 is not set
CONFIG_EXTCON_MAX77843=y
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PTN5150=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
CONFIG_EXTCON_RT8973A=y
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_EXTCON_USB_GPIO is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_BUFFER_CB is not set
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
# CONFIG_IIO_SW_TRIGGER is not set
CONFIG_IIO_TRIGGERED_EVENT=y

#
# Accelerometers
#
CONFIG_ADIS16201=y
CONFIG_ADIS16209=y
CONFIG_ADXL313=y
# CONFIG_ADXL313_I2C is not set
CONFIG_ADXL313_SPI=y
CONFIG_ADXL345=y
CONFIG_ADXL345_I2C=y
CONFIG_ADXL345_SPI=y
CONFIG_ADXL355=y
# CONFIG_ADXL355_I2C is not set
CONFIG_ADXL355_SPI=y
CONFIG_ADXL367=y
CONFIG_ADXL367_SPI=y
CONFIG_ADXL367_I2C=y
CONFIG_ADXL372=y
CONFIG_ADXL372_SPI=y
CONFIG_ADXL372_I2C=y
# CONFIG_BMA180 is not set
# CONFIG_BMA220 is not set
CONFIG_BMA400=y
CONFIG_BMA400_I2C=y
CONFIG_BMA400_SPI=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_BMC150_ACCEL_SPI=y
CONFIG_BMI088_ACCEL=y
CONFIG_BMI088_ACCEL_SPI=y
# CONFIG_DA280 is not set
CONFIG_DA311=y
CONFIG_DMARD06=y
# CONFIG_DMARD09 is not set
# CONFIG_DMARD10 is not set
CONFIG_FXLS8962AF=y
CONFIG_FXLS8962AF_I2C=y
CONFIG_FXLS8962AF_SPI=y
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
# CONFIG_IIO_KX022A_SPI is not set
# CONFIG_IIO_KX022A_I2C is not set
CONFIG_KXSD9=y
CONFIG_KXSD9_SPI=y
# CONFIG_KXSD9_I2C is not set
CONFIG_KXCJK1013=y
# CONFIG_MC3230 is not set
CONFIG_MMA7455=y
# CONFIG_MMA7455_I2C is not set
CONFIG_MMA7455_SPI=y
CONFIG_MMA7660=y
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
CONFIG_MMA9553=y
CONFIG_MSA311=y
CONFIG_MXC4005=y
CONFIG_MXC6255=y
# CONFIG_SCA3000 is not set
CONFIG_SCA3300=y
CONFIG_STK8312=y
CONFIG_STK8BA50=y
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
# CONFIG_AD4130 is not set
# CONFIG_AD7091R5 is not set
CONFIG_AD7124=y
# CONFIG_AD7192 is not set
CONFIG_AD7266=y
CONFIG_AD7280=y
CONFIG_AD7291=y
CONFIG_AD7292=y
CONFIG_AD7298=y
CONFIG_AD7476=y
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
# CONFIG_AD7606_IFACE_SPI is not set
# CONFIG_AD7766 is not set
CONFIG_AD7768_1=y
CONFIG_AD7780=y
# CONFIG_AD7791 is not set
CONFIG_AD7793=y
CONFIG_AD7887=y
CONFIG_AD7923=y
CONFIG_AD7949=y
# CONFIG_AD799X is not set
# CONFIG_ASPEED_ADC is not set
# CONFIG_AT91_SAMA5D2_ADC is not set
CONFIG_AXP20X_ADC=y
CONFIG_AXP288_ADC=y
# CONFIG_BCM_IPROC_ADC is not set
# CONFIG_BERLIN2_ADC is not set
CONFIG_CC10001_ADC=y
# CONFIG_DA9150_GPADC is not set
CONFIG_ENVELOPE_DETECTOR=y
CONFIG_HI8435=y
CONFIG_HX711=y
# CONFIG_INA2XX_ADC is not set
# CONFIG_INGENIC_ADC is not set
# CONFIG_IMX7D_ADC is not set
# CONFIG_IMX8QXP_ADC is not set
# CONFIG_LP8788_ADC is not set
# CONFIG_LPC18XX_ADC is not set
# CONFIG_LPC32XX_ADC is not set
# CONFIG_LTC2471 is not set
CONFIG_LTC2485=y
CONFIG_LTC2496=y
CONFIG_LTC2497=y
CONFIG_MAX1027=y
# CONFIG_MAX11100 is not set
CONFIG_MAX1118=y
CONFIG_MAX11205=y
# CONFIG_MAX11410 is not set
CONFIG_MAX1241=y
CONFIG_MAX1363=y
# CONFIG_MAX9611 is not set
CONFIG_MCP320X=y
CONFIG_MCP3422=y
# CONFIG_MCP3911 is not set
# CONFIG_MEDIATEK_MT6360_ADC is not set
# CONFIG_MEDIATEK_MT6370_ADC is not set
# CONFIG_MEDIATEK_MT6577_AUXADC is not set
CONFIG_MEN_Z188_ADC=y
CONFIG_MP2629_ADC=y
CONFIG_NAU7802=y
# CONFIG_NPCM_ADC is not set
CONFIG_QCOM_VADC_COMMON=y
CONFIG_QCOM_SPMI_IADC=y
# CONFIG_QCOM_SPMI_VADC is not set
CONFIG_QCOM_SPMI_ADC5=y
# CONFIG_RCAR_GYRO_ADC is not set
# CONFIG_ROCKCHIP_SARADC is not set
CONFIG_RICHTEK_RTQ6056=y
# CONFIG_RZG2L_ADC is not set
# CONFIG_SC27XX_ADC is not set
# CONFIG_SPEAR_ADC is not set
CONFIG_SD_ADC_MODULATOR=y
# CONFIG_STM32_DFSDM_CORE is not set
# CONFIG_STM32_DFSDM_ADC is not set
CONFIG_TI_ADC081C=y
CONFIG_TI_ADC0832=y
CONFIG_TI_ADC084S021=y
CONFIG_TI_ADC12138=y
# CONFIG_TI_ADC108S102 is not set
# CONFIG_TI_ADC128S052 is not set
CONFIG_TI_ADC161S626=y
CONFIG_TI_ADS1015=y
CONFIG_TI_ADS7950=y
CONFIG_TI_ADS8344=y
CONFIG_TI_ADS8688=y
CONFIG_TI_ADS124S08=y
CONFIG_TI_ADS131E08=y
CONFIG_TI_TLC4541=y
CONFIG_TI_TSC2046=y
# CONFIG_VF610_ADC is not set
# CONFIG_XILINX_XADC is not set
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters

#
# Analog to digital and digital to analog converters
#
# CONFIG_AD74115 is not set
CONFIG_AD74413R=y
# end of Analog to digital and digital to analog converters

#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=y
# end of Analog Front Ends

#
# Amplifiers
#
CONFIG_AD8366=y
CONFIG_ADA4250=y
CONFIG_HMC425=y
# end of Amplifiers

#
# Capacitance to digital converters
#
CONFIG_AD7150=y
CONFIG_AD7746=y
# end of Capacitance to digital converters

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
# CONFIG_ATLAS_EZO_SENSOR is not set
CONFIG_BME680=y
CONFIG_BME680_I2C=y
CONFIG_BME680_SPI=y
CONFIG_CCS811=y
# CONFIG_IAQCORE is not set
CONFIG_PMS7003=y
CONFIG_SCD30_CORE=y
CONFIG_SCD30_I2C=y
CONFIG_SCD30_SERIAL=y
CONFIG_SCD4X=y
# CONFIG_SENSIRION_SGP30 is not set
CONFIG_SENSIRION_SGP40=y
# CONFIG_SPS30_I2C is not set
# CONFIG_SPS30_SERIAL is not set
CONFIG_SENSEAIR_SUNRISE_CO2=y
CONFIG_VZ89X=y
# end of Chemical Sensors

#
# Hid Sensor IIO Common
#
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=y

#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors

#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=y
CONFIG_IIO_SSP_SENSORHUB=y
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Digital to analog converters
#
CONFIG_AD3552R=y
CONFIG_AD5064=y
CONFIG_AD5360=y
CONFIG_AD5380=y
CONFIG_AD5421=y
CONFIG_AD5446=y
# CONFIG_AD5449 is not set
CONFIG_AD5592R_BASE=y
CONFIG_AD5592R=y
CONFIG_AD5593R=y
CONFIG_AD5504=y
# CONFIG_AD5624R_SPI is not set
# CONFIG_LTC2688 is not set
CONFIG_AD5686=y
# CONFIG_AD5686_SPI is not set
CONFIG_AD5696_I2C=y
# CONFIG_AD5755 is not set
CONFIG_AD5758=y
CONFIG_AD5761=y
CONFIG_AD5764=y
CONFIG_AD5766=y
# CONFIG_AD5770R is not set
CONFIG_AD5791=y
CONFIG_AD7293=y
# CONFIG_AD7303 is not set
# CONFIG_AD8801 is not set
CONFIG_DPOT_DAC=y
CONFIG_DS4424=y
# CONFIG_LPC18XX_DAC is not set
CONFIG_LTC1660=y
CONFIG_LTC2632=y
CONFIG_M62332=y
CONFIG_MAX517=y
CONFIG_MAX5821=y
CONFIG_MCP4725=y
# CONFIG_MCP4922 is not set
# CONFIG_STM32_DAC is not set
CONFIG_TI_DAC082S085=y
CONFIG_TI_DAC5571=y
CONFIG_TI_DAC7311=y
# CONFIG_TI_DAC7612 is not set
# CONFIG_VF610_DAC is not set
# end of Digital to analog converters

#
# IIO dummy driver
#
# CONFIG_IIO_SIMPLE_DUMMY is not set
# end of IIO dummy driver

#
# Filters
#
# CONFIG_ADMV8818 is not set
# end of Filters

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
CONFIG_AD9523=y
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set
CONFIG_ADF4371=y
# CONFIG_ADF4377 is not set
# CONFIG_ADMV1013 is not set
CONFIG_ADMV1014=y
CONFIG_ADMV4420=y
CONFIG_ADRF6780=y
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
# CONFIG_ADIS16136 is not set
CONFIG_ADIS16260=y
# CONFIG_ADXRS290 is not set
# CONFIG_ADXRS450 is not set
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
CONFIG_BMG160_SPI=y
# CONFIG_FXAS21002C is not set
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
# CONFIG_IIO_ST_GYRO_3AXIS is not set
CONFIG_ITG3200=y
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4403=y
CONFIG_AFE4404=y
CONFIG_MAX30100=y
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
# CONFIG_AM2315 is not set
CONFIG_DHT11=y
CONFIG_HDC100X=y
CONFIG_HDC2010=y
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTS221_SPI=y
# CONFIG_HTU21 is not set
# CONFIG_SI7005 is not set
CONFIG_SI7020=y
# end of Humidity sensors

#
# Inertial measurement units
#
CONFIG_ADIS16400=y
CONFIG_ADIS16460=y
CONFIG_ADIS16475=y
CONFIG_ADIS16480=y
CONFIG_BMI160=y
# CONFIG_BMI160_I2C is not set
CONFIG_BMI160_SPI=y
CONFIG_BOSCH_BNO055=y
CONFIG_BOSCH_BNO055_SERIAL=y
# CONFIG_BOSCH_BNO055_I2C is not set
CONFIG_FXOS8700=y
# CONFIG_FXOS8700_I2C is not set
CONFIG_FXOS8700_SPI=y
CONFIG_KMX61=y
# CONFIG_INV_ICM42600_I2C is not set
# CONFIG_INV_ICM42600_SPI is not set
CONFIG_INV_MPU6050_IIO=y
# CONFIG_INV_MPU6050_I2C is not set
CONFIG_INV_MPU6050_SPI=y
# CONFIG_IIO_ST_LSM6DSX is not set
# CONFIG_IIO_ST_LSM9DS0 is not set
# end of Inertial measurement units

CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y

#
# Light sensors
#
CONFIG_ACPI_ALS=y
CONFIG_ADJD_S311=y
CONFIG_ADUX1020=y
CONFIG_AL3010=y
# CONFIG_AL3320A is not set
CONFIG_APDS9300=y
# CONFIG_APDS9960 is not set
CONFIG_AS73211=y
CONFIG_BH1750=y
CONFIG_BH1780=y
# CONFIG_CM32181 is not set
CONFIG_CM3232=y
CONFIG_CM3323=y
CONFIG_CM3605=y
CONFIG_CM36651=y
CONFIG_GP2AP002=y
# CONFIG_GP2AP020A00F is not set
# CONFIG_IQS621_ALS is not set
CONFIG_SENSORS_ISL29018=y
# CONFIG_SENSORS_ISL29028 is not set
CONFIG_ISL29125=y
CONFIG_JSA1212=y
CONFIG_RPR0521=y
CONFIG_LTR501=y
CONFIG_LTRF216A=y
# CONFIG_LV0104CS is not set
# CONFIG_MAX44000 is not set
# CONFIG_MAX44009 is not set
# CONFIG_NOA1305 is not set
CONFIG_OPT3001=y
CONFIG_PA12203001=y
CONFIG_SI1133=y
# CONFIG_SI1145 is not set
# CONFIG_STK3310 is not set
# CONFIG_ST_UVIS25 is not set
CONFIG_TCS3414=y
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL2591=y
CONFIG_TSL2772=y
CONFIG_TSL4531=y
CONFIG_US5182D=y
CONFIG_VCNL4000=y
CONFIG_VCNL4035=y
CONFIG_VEML6030=y
# CONFIG_VEML6070 is not set
# CONFIG_VL6180 is not set
CONFIG_ZOPT2201=y
# end of Light sensors

#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=y
CONFIG_AK09911=y
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_BMC150_MAGN_SPI=y
# CONFIG_MAG3110 is not set
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_HMC5843_SPI=y
CONFIG_SENSORS_RM3100=y
CONFIG_SENSORS_RM3100_I2C=y
CONFIG_SENSORS_RM3100_SPI=y
# CONFIG_YAMAHA_YAS530 is not set
# end of Magnetometer sensors

#
# Multiplexers
#
CONFIG_IIO_MUX=y
# end of Multiplexers

#
# Inclinometer sensors
#
# end of Inclinometer sensors

#
# Triggers - standalone
#
CONFIG_IIO_INTERRUPT_TRIGGER=y
# CONFIG_IIO_STM32_LPTIMER_TRIGGER is not set
# CONFIG_IIO_STM32_TIMER_TRIGGER is not set
# CONFIG_IIO_SYSFS_TRIGGER is not set
# end of Triggers - standalone

#
# Linear and angular position sensors
#
# CONFIG_IQS624_POS is not set
# end of Linear and angular position sensors

#
# Digital potentiometers
#
# CONFIG_AD5110 is not set
CONFIG_AD5272=y
# CONFIG_DS1803 is not set
CONFIG_MAX5432=y
CONFIG_MAX5481=y
CONFIG_MAX5487=y
CONFIG_MCP4018=y
CONFIG_MCP4131=y
CONFIG_MCP4531=y
CONFIG_MCP41010=y
CONFIG_TPL0102=y
# end of Digital potentiometers

#
# Digital potentiostats
#
# CONFIG_LMP91000 is not set
# end of Digital potentiostats

#
# Pressure sensors
#
CONFIG_ABP060MG=y
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_BMP280_SPI=y
# CONFIG_DLHL60D is not set
# CONFIG_DPS310 is not set
CONFIG_HP03=y
CONFIG_ICP10100=y
CONFIG_MPL115=y
# CONFIG_MPL115_I2C is not set
CONFIG_MPL115_SPI=y
CONFIG_MPL3115=y
# CONFIG_MS5611 is not set
CONFIG_MS5637=y
# CONFIG_IIO_ST_PRESS is not set
# CONFIG_T5403 is not set
CONFIG_HP206C=y
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
CONFIG_ZPA2326_SPI=y
# end of Pressure sensors

#
# Lightning sensors
#
CONFIG_AS3935=y
# end of Lightning sensors

#
# Proximity and distance sensors
#
CONFIG_ISL29501=y
CONFIG_LIDAR_LITE_V2=y
# CONFIG_MB1232 is not set
CONFIG_PING=y
CONFIG_RFD77402=y
CONFIG_SRF04=y
CONFIG_SX_COMMON=y
CONFIG_SX9310=y
CONFIG_SX9324=y
CONFIG_SX9360=y
CONFIG_SX9500=y
# CONFIG_SRF08 is not set
CONFIG_VCNL3020=y
CONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
CONFIG_AD2S90=y
CONFIG_AD2S1200=y
# end of Resolver to digital converters

#
# Temperature sensors
#
# CONFIG_IQS620AT_TEMP is not set
CONFIG_LTC2983=y
# CONFIG_MAXIM_THERMOCOUPLE is not set
# CONFIG_MLX90614 is not set
CONFIG_MLX90632=y
CONFIG_TMP006=y
CONFIG_TMP007=y
CONFIG_TMP117=y
# CONFIG_TSYS01 is not set
CONFIG_TSYS02D=y
# CONFIG_MAX30208 is not set
CONFIG_MAX31856=y
CONFIG_MAX31865=y
# end of Temperature sensors

CONFIG_NTB=y
CONFIG_NTB_MSI=y
CONFIG_NTB_IDT=y
# CONFIG_NTB_SWITCHTEC is not set
CONFIG_NTB_PINGPONG=y
CONFIG_NTB_TOOL=y
# CONFIG_NTB_PERF is not set
CONFIG_NTB_MSI_TEST=y
# CONFIG_NTB_TRANSPORT is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_BCM_IPROC is not set
# CONFIG_PWM_BCM_KONA is not set
# CONFIG_PWM_BCM2835 is not set
# CONFIG_PWM_BERLIN is not set
# CONFIG_PWM_BRCMSTB is not set
# CONFIG_PWM_CLK is not set
# CONFIG_PWM_CLPS711X is not set
# CONFIG_PWM_DWC is not set
# CONFIG_PWM_EP93XX is not set
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMG is not set
# CONFIG_PWM_IMX1 is not set
# CONFIG_PWM_IMX27 is not set
# CONFIG_PWM_IMX_TPM is not set
# CONFIG_PWM_INTEL_LGM is not set
# CONFIG_PWM_IQS620A is not set
# CONFIG_PWM_JZ4740 is not set
# CONFIG_PWM_KEEMBAY is not set
CONFIG_PWM_LP3943=y
# CONFIG_PWM_LPC18XX_SCT is not set
# CONFIG_PWM_LPC32XX is not set
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_MESON is not set
# CONFIG_PWM_MTK_DISP is not set
# CONFIG_PWM_MEDIATEK is not set
CONFIG_PWM_PCA9685=y
# CONFIG_PWM_PXA is not set
# CONFIG_PWM_RASPBERRYPI_POE is not set
# CONFIG_PWM_RCAR is not set
# CONFIG_PWM_RENESAS_TPU is not set
# CONFIG_PWM_ROCKCHIP is not set
# CONFIG_PWM_SAMSUNG is not set
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SPRD is not set
# CONFIG_PWM_STM32 is not set
# CONFIG_PWM_STM32_LP is not set
# CONFIG_PWM_SUN4I is not set
# CONFIG_PWM_TEGRA is not set
# CONFIG_PWM_TIECAP is not set
# CONFIG_PWM_TIEHRPWM is not set
# CONFIG_PWM_VISCONTI is not set
# CONFIG_PWM_VT8500 is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_MADERA_IRQ=y
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
# CONFIG_IMX_IRQSTEER is not set
# CONFIG_IMX_INTMUX is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
CONFIG_IRQ_LOONGARCH_CPU=y
CONFIG_LOONGSON_LIOINTC=y
CONFIG_LOONGSON_EIOINTC=y
CONFIG_LOONGSON_HTVEC=y
CONFIG_LOONGSON_PCH_PIC=y
CONFIG_LOONGSON_PCH_MSI=y
CONFIG_LOONGSON_PCH_LPC=y
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support

CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_BRCMSTB is not set
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_HSDK is not set
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_LANTIQ is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MCHP_SPARX5 is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_MESON_AUDIO_ARB is not set
# CONFIG_RESET_NPCM is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_QCOM_PDC is not set
# CONFIG_RESET_RASPBERRYPI is not set
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
# CONFIG_RESET_SCMI is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_RESET_TI_SCI is not set
CONFIG_RESET_TI_SYSCON=y
CONFIG_RESET_TI_TPS380X=y
# CONFIG_RESET_TN48M_CPLD is not set
# CONFIG_RESET_ZYNQ is not set
# CONFIG_COMMON_RESET_HI3660 is not set
# CONFIG_COMMON_RESET_HI6220 is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
CONFIG_BCM_KONA_USB2_PHY=y
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
CONFIG_PHY_PXA_28NM_HSIC=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_STIH407_USB is not set
# CONFIG_PHY_STM32_USBPHYC is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_AM654_SERDES is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
CONFIG_MCB=y
CONFIG_MCB_PCI=y
# CONFIG_MCB_LPC is not set

#
# Performance monitor support
#
# CONFIG_ARM_CCN is not set
# CONFIG_ARM_CMN is not set
# CONFIG_ARM_SMMU_V3_PMU is not set
# CONFIG_FSL_IMX8_DDR_PMU is not set
CONFIG_THUNDERX2_PMU=y
# CONFIG_XGENE_PMU is not set
# CONFIG_ARM_DMC620_PMU is not set
# CONFIG_MARVELL_CN10K_TAD_PMU is not set
# CONFIG_ALIBABA_UNCORE_DRW_PMU is not set
# CONFIG_HNS3_PMU is not set
# CONFIG_MARVELL_CN10K_DDR_PMU is not set
# CONFIG_MESON_DDR_PMU is not set
# end of Performance monitor support

CONFIG_RAS=y
CONFIG_USB4=y
# CONFIG_USB4_DEBUGFS_WRITE is not set
CONFIG_USB4_DMA_TEST=y

#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
# CONFIG_ANDROID_BINDERFS is not set
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
# CONFIG_ANDROID_BINDER_IPC_SELFTEST is not set
# end of Android

CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_APPLE_EFUSES is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
# CONFIG_NVMEM_IMX_IIM is not set
# CONFIG_NVMEM_IMX_OCOTP is not set
# CONFIG_NVMEM_LAN9662_OTPC is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
# CONFIG_NVMEM_LPC18XX_OTP is not set
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_MTK_EFUSE is not set
# CONFIG_NVMEM_MXS_OCOTP is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_NVMEM_QCOM_QFPROM is not set
CONFIG_NVMEM_RAVE_SP_EEPROM=y
# CONFIG_NVMEM_RMEM is not set
# CONFIG_NVMEM_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SC27XX_EFUSE is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
CONFIG_NVMEM_SPMI_SDAM=y
# CONFIG_NVMEM_SPRD_EFUSE is not set
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
# CONFIG_NVMEM_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set

#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
# CONFIG_STM_PROTO_SYS_T is not set
CONFIG_STM_DUMMY=y
# CONFIG_STM_SOURCE_CONSOLE is not set
CONFIG_STM_SOURCE_HEARTBEAT=y
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_PCI=y
# CONFIG_INTEL_TH_ACPI is not set
CONFIG_INTEL_TH_GTH=y
# CONFIG_INTEL_TH_STH is not set
CONFIG_INTEL_TH_MSU=y
# CONFIG_INTEL_TH_PTI is not set
# CONFIG_INTEL_TH_DEBUG is not set
# CONFIG_HISI_PTT is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_ADGS1408=y
CONFIG_MUX_GPIO=y
# CONFIG_MUX_MMIO is not set
# end of Multiplexer drivers

CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=y
# CONFIG_SLIM_QCOM_CTRL is not set
# CONFIG_SLIM_QCOM_NGD_CTRL is not set
CONFIG_INTERCONNECT=y
# CONFIG_INTERCONNECT_IMX is not set
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_SAMSUNG is not set
CONFIG_COUNTER=y
# CONFIG_104_QUAD_8 is not set
CONFIG_INTERRUPT_CNT=y
# CONFIG_STM32_TIMER_CNT is not set
# CONFIG_STM32_LPTIMER_CNT is not set
# CONFIG_TI_EQEP is not set
CONFIG_INTEL_QEP=y
# CONFIG_TI_ECAP_CAPTURE is not set
CONFIG_MOST=y
CONFIG_MOST_CDEV=y
CONFIG_PECI=y
CONFIG_PECI_CPU=y
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
# CONFIG_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FS_VERITY=y
CONFIG_FS_VERITY_DEBUG=y
# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
# CONFIG_VIRTIO_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
# CONFIG_HUGETLBFS is not set
CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_CONFIGFS_FS=y
# CONFIG_EFIVAR_FS is not set
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_CRAMFS_MTD is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_MTD=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
CONFIG_PSTORE_LZ4_COMPRESS=y
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
CONFIG_PSTORE_RAM=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=y
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_PATH=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER=y
CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING=y
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_SECURITY_SAFESETID=y
CONFIG_SECURITY_LOCKDOWN_LSM=y
# CONFIG_SECURITY_LOCKDOWN_LSM_EARLY is not set
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
CONFIG_SECURITY_LANDLOCK=y
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
# CONFIG_IMA_NG_TEMPLATE is not set
CONFIG_IMA_SIG_TEMPLATE=y
CONFIG_IMA_DEFAULT_TEMPLATE="ima-sig"
# CONFIG_IMA_DEFAULT_HASH_SHA1 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
CONFIG_IMA_DEFAULT_HASH_SHA512=y
# CONFIG_IMA_DEFAULT_HASH_SM3 is not set
CONFIG_IMA_DEFAULT_HASH="sha512"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
# CONFIG_IMA_APPRAISE_BOOTPARAM is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
CONFIG_IMA_DISABLE_HTABLE=y
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,tomoyo,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=y
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARIA=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_SM4_GENERIC=y
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_OFB=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ESSIV=y
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
# CONFIG_CRYPTO_BLAKE2B is not set
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_VMAC=y
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRC64_ROCKSOFT is not set
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
# end of Compression

#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# end of Random number generation

#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
CONFIG_CRYPTO_STATS=y
# end of Userspace interface

CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=y
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
CONFIG_FIPS_SIGNATURE_SELFTEST=y

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
CONFIG_SECONDARY_TRUSTED_KEYRING=y
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

#
# Library routines
#
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=y
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_GF128MUL=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
# CONFIG_XZ_DEC_SPARC is not set
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
CONFIG_DMA_CMA=y
# CONFIG_DMA_PERNUMA_CMA is not set

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_PERCENTAGE=10
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
CONFIG_CMA_SIZE_SEL_PERCENTAGE=y
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_DMA_API_DEBUG=y
CONFIG_DMA_API_DEBUG_SG=y
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_MEMREGION=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines

CONFIG_GENERIC_LIB_ASHLDI3=y
CONFIG_GENERIC_LIB_ASHRDI3=y
CONFIG_GENERIC_LIB_LSHRDI3=y
CONFIG_GENERIC_LIB_CMPDI2=y
CONFIG_GENERIC_LIB_UCMPDI2=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
# CONFIG_SYMBOLIC_ERRNAME is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
CONFIG_DEBUG_INFO_DWARF5=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
# CONFIG_UBSAN_SHIFT is not set
# CONFIG_UBSAN_DIV_ZERO is not set
CONFIG_UBSAN_UNREACHABLE=y
# CONFIG_UBSAN_BOOL is not set
# CONFIG_UBSAN_ENUM is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
CONFIG_DEBUG_NET=y
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_DEBUG_VM_IRQSOFF=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_MAPLE_TREE=y
# CONFIG_DEBUG_VM_RB is not set
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_SCF_TORTURE_TEST=y
CONFIG_CSD_LOCK_WAIT_DEBUG=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures

CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set

#
# loongarch Debugging
#
CONFIG_UNWINDER_GUESS=y
# CONFIG_UNWINDER_PROLOGUE is not set
# end of loongarch Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAULT_INJECTION_USERCOPY is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_TEST_DHRY is not set
CONFIG_LKDTM=y
CONFIG_TEST_MIN_HEAP=y
# CONFIG_TEST_DIV64 is not set
CONFIG_BACKTRACE_SELF_TEST=y
# CONFIG_TEST_REF_TRACKER is not set
CONFIG_RBTREE_TEST=y
# CONFIG_REED_SOLOMON_TEST is not set
CONFIG_INTERVAL_TREE_TEST=y
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_TEST_HEXDUMP is not set
CONFIG_STRING_SELFTEST=y
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not set
CONFIG_TEST_SCANF=y
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
CONFIG_TEST_MAPLE_TREE=y
CONFIG_TEST_RHASHTABLE=y
CONFIG_TEST_IDA=y
CONFIG_FIND_BIT_BENCHMARK=y
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_UDELAY=y
CONFIG_TEST_DYNAMIC_DEBUG=y
CONFIG_TEST_MEMCAT_P=y
# CONFIG_TEST_MEMINIT is not set
CONFIG_TEST_FREE_PAGES=y
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking

# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking

Re: [PATCH v2 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas

[Baoquan He]

On 12/17/22 at 02:41pm, kernel test robot wrote:
> Hi Baoquan,
> 
> I love your patch! Perhaps something to improve:
> 
> [auto build test WARNING on akpm-mm/mm-everything]
> 
> url:    https://github.com/intel-lab-lkp/linux/commits/Baoquan-He/mm-vmalloc-c-allow-vread-to-read-out-vm_map_ram-areas/20221217-095615
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-everything
> patch link:    https://lore.kernel.org/r/20221217015435.73889-4-bhe%40redhat.com
> patch subject: [PATCH v2 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas
> config: loongarch-randconfig-r006-20221216
> compiler: loongarch64-linux-gcc (GCC) 12.1.0
> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # https://github.com/intel-lab-lkp/linux/commit/368cd65be8fedd1642e53393dc3f28ff8726122d
>         git remote add linux-review https://github.com/intel-lab-lkp/linux
>         git fetch --no-tags linux-review Baoquan-He/mm-vmalloc-c-allow-vread-to-read-out-vm_map_ram-areas/20221217-095615
>         git checkout 368cd65be8fedd1642e53393dc3f28ff8726122d
>         # save the config file
>         mkdir build_dir && cp config build_dir/.config
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=loongarch olddefconfig
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=loongarch SHELL=/bin/bash
> 
> If you fix the issue, kindly add following tag where applicable
> | Reported-by: kernel test robot <lkp@intel.com>
> 
> All warnings (new ones prefixed by >>):
> 
>    mm/vmalloc.c: In function 'vb_vread':
> >> mm/vmalloc.c:3563:49: warning: suggest parentheses around '-' inside '<<' [-Wparentheses]
>     3563 |                 n = (re - rs + 1) << PAGE_SHIFT - offset;

Thanks, below code change can fix the warning.

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index bdaceda1b878..ec5665e70114 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -3544,7 +3544,7 @@ static void vb_vread(char *buf, char *addr, int count)
 		}
 		/*it could start reading from the middle of used region*/
 		offset = offset_in_page(addr);
-		n = (re - rs + 1) << PAGE_SHIFT - offset;
+		n = ((re - rs + 1) << PAGE_SHIFT) - offset;
 		if (n > count)
 			n = count;
 		aligned_vread(buf, start+offset, n);

Re: [PATCH v2 2/7] mm/vmalloc.c: add flags to mark vm_map_ram area

[Lorenzo Stoakes]

On Sat, Dec 17, 2022 at 09:54:30AM +0800, Baoquan He wrote:
> @@ -2229,8 +2236,12 @@ void vm_unmap_ram(const void *mem, unsigned int count)
>  		return;
>  	}
>
> -	va = find_vmap_area(addr);
> +	spin_lock(&vmap_area_lock);
> +	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
>  	BUG_ON(!va);
> +	if (va)
> +		va->flags &= ~VMAP_RAM;
> +	spin_unlock(&vmap_area_lock);
>  	debug_check_no_locks_freed((void *)va->va_start,
>  				    (va->va_end - va->va_start));
>  	free_unmap_vmap_area(va);

Would it be better to perform the BUG_ON() after the lock is released? You
already check if va exists before unmasking so it's safe.

Also, do we want to clear VMAP_BLOCK here?

Re: [PATCH v2 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas

[Lorenzo Stoakes]

On Sat, Dec 17, 2022 at 09:54:31AM +0800, Baoquan He wrote:
> Currently, vread can read out vmalloc areas which is associated with
> a vm_struct. While this doesn't work for areas created by vm_map_ram()
> interface because it doesn't have an associated vm_struct. Then in vread(),
> these areas will be skipped.
>
> Here, add a new function vb_vread() to read out areas managed by
> vmap_block specifically. Then recognize vm_map_ram areas via vmap->flags
> and handle them respectively.
>
> Signed-off-by: Baoquan He <bhe@redhat.com>
> ---
>  mm/vmalloc.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++------
>  1 file changed, 59 insertions(+), 7 deletions(-)
>
> diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> index 190f29bbaaa7..6612914459cf 100644
> --- a/mm/vmalloc.c
> +++ b/mm/vmalloc.c
> @@ -3515,6 +3515,51 @@ static int aligned_vread(char *buf, char *addr, unsigned long count)
>  	return copied;
>  }
>
> +static void vb_vread(char *buf, char *addr, int count)
> +{
> +	char *start;
> +	struct vmap_block *vb;
> +	unsigned long offset;
> +	unsigned int rs, re, n;
> +
> +	vb = xa_load(&vmap_blocks, addr_to_vb_idx((unsigned long)addr));
> +
> +	spin_lock(&vb->lock);
> +	if (bitmap_empty(vb->used_map, VMAP_BBMAP_BITS)) {
> +		spin_unlock(&vb->lock);
> +		memset(buf, 0, count);
> +		return;
> +	}
> +	for_each_set_bitrange(rs, re, vb->used_map, VMAP_BBMAP_BITS) {
> +		if (!count)
> +			break;
> +		start = vmap_block_vaddr(vb->va->va_start, rs);
> +		if (addr < start) {
> +			if (count == 0)
> +				break;
> +			*buf = '\0';
> +			buf++;
> +			addr++;
> +			count--;
> +		}

I may be missing something here, but is this not essentially 'if the address is
below a used region, write a single null byte into the buffer and continue,
assuming we are now in a used area?'

This doesn't seem right, but I am happy to be corrected (perhaps we only expect
to be a single byte below a start region?)

> +		/*it could start reading from the middle of used region*/
> +		offset = offset_in_page(addr);
> +		n = (re - rs + 1) << PAGE_SHIFT - offset;

The kernel bot has already picked up on this paren issue :)

> +		if (n > count)
> +			n = count;
> +		aligned_vread(buf, start+offset, n);
> +
> +		buf += n;
> +		addr += n;
> +		count -= n;
> +	}
> +	spin_unlock(&vb->lock);
> +
> +	/* zero-fill the left dirty or free regions */
> +	if (count)
> +		memset(buf, 0, count);
> +}
> +
>  /**
>   * vread() - read vmalloc area in a safe way.
>   * @buf:     buffer for reading data
> @@ -3545,7 +3590,7 @@ long vread(char *buf, char *addr, unsigned long count)
>  	struct vm_struct *vm;
>  	char *vaddr, *buf_start = buf;
>  	unsigned long buflen = count;
> -	unsigned long n;
> +	unsigned long n, size, flags;
>
>  	addr = kasan_reset_tag(addr);
>
> @@ -3566,12 +3611,16 @@ long vread(char *buf, char *addr, unsigned long count)
>  		if (!count)
>  			break;
>
> -		if (!va->vm)
> +		vm = va->vm;
> +		flags = va->flags & VMAP_FLAGS_MASK;
> +
> +		if (!vm && !flags)
>  			continue;
>

This seems very delicate now as going forward, vm _could_ be NULL. In fact, a
later patch in the series then goes on to use vm and assume it is not null (will
comment).

I feel we should be very explicit after here asserting that vm != NULL.

> -		vm = va->vm;
> -		vaddr = (char *) vm->addr;
> -		if (addr >= vaddr + get_vm_area_size(vm))
> +		vaddr = (char *) va->va_start;
> +		size = flags ? va_size(va) : get_vm_area_size(vm);

For example here, I feel that this ternary should be reversed and based on
whether vm is null, unles we expect vm to ever be non-null _and_ flags to be
set?

> +
> +		if (addr >= vaddr + size)
>  			continue;
>  		while (addr < vaddr) {
>  			if (count == 0)
> @@ -3581,10 +3630,13 @@ long vread(char *buf, char *addr, unsigned long count)
>  			addr++;
>  			count--;
>  		}
> -		n = vaddr + get_vm_area_size(vm) - addr;
> +		n = vaddr + size - addr;
>  		if (n > count)
>  			n = count;
> -		if (!(vm->flags & VM_IOREMAP))
> +
> +		if ((flags & (VMAP_RAM|VMAP_BLOCK)) == (VMAP_RAM|VMAP_BLOCK))
> +			vb_vread(buf, addr, n);
> +		else if ((flags & VMAP_RAM) || !(vm->flags & VM_IOREMAP))
>  			aligned_vread(buf, addr, n);
>  		else /* IOREMAP area is treated as memory hole */
>  			memset(buf, 0, n);
> --
> 2.34.1
>

Re: [PATCH v2 5/7] mm/vmalloc: skip the uninitilized vmalloc areas

[Lorenzo Stoakes]

On Sat, Dec 17, 2022 at 09:54:33AM +0800, Baoquan He wrote:
> @@ -3617,6 +3617,11 @@ long vread(char *buf, char *addr, unsigned long count)
>  		if (!vm && !flags)
>  			continue;
>
> +		if (vm->flags & VM_UNINITIALIZED)
> +			continue;

This comes immediately after asserting that vm _might be null_. This surely must become:-

if (vm && vm->flags & VM_UNINITIALIZED)
        continue;

Re: [PATCH v2 5/7] mm/vmalloc: skip the uninitilized vmalloc areas

[Baoquan He]

On 12/17/22 at 12:07pm, Lorenzo Stoakes wrote:
> On Sat, Dec 17, 2022 at 09:54:33AM +0800, Baoquan He wrote:
> > @@ -3617,6 +3617,11 @@ long vread(char *buf, char *addr, unsigned long count)
> >  		if (!vm && !flags)
> >  			continue;
> >
> > +		if (vm->flags & VM_UNINITIALIZED)
> > +			continue;
> 
> This comes immediately after asserting that vm _might be null_. This surely must become:-
> 
> if (vm && vm->flags & VM_UNINITIALIZED)
>         continue;

You are right, will fix it in v3. Thanks for careful reivewing.

Re: [PATCH v2 2/7] mm/vmalloc.c: add flags to mark vm_map_ram area

[Baoquan He]

On 12/17/22 at 11:44am, Lorenzo Stoakes wrote:
> On Sat, Dec 17, 2022 at 09:54:30AM +0800, Baoquan He wrote:
> > @@ -2229,8 +2236,12 @@ void vm_unmap_ram(const void *mem, unsigned int count)
> >  		return;
> >  	}
> >
> > -	va = find_vmap_area(addr);
> > +	spin_lock(&vmap_area_lock);
> > +	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
> >  	BUG_ON(!va);
> > +	if (va)
> > +		va->flags &= ~VMAP_RAM;
> > +	spin_unlock(&vmap_area_lock);
> >  	debug_check_no_locks_freed((void *)va->va_start,
> >  				    (va->va_end - va->va_start));
> >  	free_unmap_vmap_area(va);
> 
> Would it be better to perform the BUG_ON() after the lock is released? You
> already check if va exists before unmasking so it's safe.

It's a little unclear to me why we care BUG_ON() is performed before or
after the lock released. We won't have a stable kernel after BUG_ON()(),
right?
> 
> Also, do we want to clear VMAP_BLOCK here?

I do, but I don't find a good place to clear VMAP_BLOCK.

In v1, I tried to clear it in free_vmap_area_noflush() as below,
Uladzislau dislikes it. So I remove it. My thinking is when we unmap and
free the vmap area, the vmap_area is moved from vmap_area_root into
&free_vmap_area_root. When we allocate a new vmap_area via
alloc_vmap_area(), we will allocate a new va by kmem_cache_alloc_node(),
the va->flags must be 0. Seems not initializing it to 0 won't impact
thing.

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 5d3fd3e6fe09..d6f376060d83 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1815,6 +1815,7 @@ static void free_vmap_area_noflush(struct vmap_area *va)

        spin_lock(&vmap_area_lock);
        unlink_va(va, &vmap_area_root);
+       va->flags = 0;
        spin_unlock(&vmap_area_lock);

        nr_lazy = atomic_long_add_return((va->va_end - va->va_start) >>

> 

Re: [PATCH v2 2/7] mm/vmalloc.c: add flags to mark vm_map_ram area

[Lorenzo Stoakes]

On Mon, Dec 19, 2022 at 04:01:00PM +0800, Baoquan He wrote:
> On 12/17/22 at 11:44am, Lorenzo Stoakes wrote:
> > On Sat, Dec 17, 2022 at 09:54:30AM +0800, Baoquan He wrote:
> > > @@ -2229,8 +2236,12 @@ void vm_unmap_ram(const void *mem, unsigned int count)
> > >  		return;
> > >  	}
> > >
> > > -	va = find_vmap_area(addr);
> > > +	spin_lock(&vmap_area_lock);
> > > +	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
> > >  	BUG_ON(!va);
> > > +	if (va)
> > > +		va->flags &= ~VMAP_RAM;
> > > +	spin_unlock(&vmap_area_lock);
> > >  	debug_check_no_locks_freed((void *)va->va_start,
> > >  				    (va->va_end - va->va_start));
> > >  	free_unmap_vmap_area(va);
> >
> > Would it be better to perform the BUG_ON() after the lock is released? You
> > already check if va exists before unmasking so it's safe.
>
> It's a little unclear to me why we care BUG_ON() is performed before or
> after the lock released. We won't have a stable kernel after BUG_ON()(),
> right?

BUG_ON()'s can be recoverable in user context and it would be a very simple
change that would not fundamentally alter anything to simply place the added
lines prior to the BUG_ON().

The code as-is doesn't really make sense anyway, you BUG_ON(!va) then check if
va is non-null, then immediately the function afterwards passes va around as if
it were not null, so I think it'd also be an aesthetic and logical improvement
:)

> >
> > Also, do we want to clear VMAP_BLOCK here?
>
> I do, but I don't find a good place to clear VMAP_BLOCK.
>
> In v1, I tried to clear it in free_vmap_area_noflush() as below,
> Uladzislau dislikes it. So I remove it. My thinking is when we unmap and
> free the vmap area, the vmap_area is moved from vmap_area_root into
> &free_vmap_area_root. When we allocate a new vmap_area via
> alloc_vmap_area(), we will allocate a new va by kmem_cache_alloc_node(),
> the va->flags must be 0. Seems not initializing it to 0 won't impact
> thing.
>

You are at this point clearing the VMAP_RAM flag though, so if it is unimportant
what the flags are after this call, why are you clearing this one?

It is just a little confusing, I wonder whether the VMAP_BLOCK flag is necessary
at all, is it possible to just treat a non-VMAP_BLOCK VMAP_RAM area as if it
were simply a fully occupied block? Do we gain much by the distinction?

> diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> index 5d3fd3e6fe09..d6f376060d83 100644
> --- a/mm/vmalloc.c
> +++ b/mm/vmalloc.c
> @@ -1815,6 +1815,7 @@ static void free_vmap_area_noflush(struct vmap_area *va)
>
>         spin_lock(&vmap_area_lock);
>         unlink_va(va, &vmap_area_root);
> +       va->flags = 0;
>         spin_unlock(&vmap_area_lock);
>
>         nr_lazy = atomic_long_add_return((va->va_end - va->va_start) >>
>
> >
>

Re: [PATCH v2 2/7] mm/vmalloc.c: add flags to mark vm_map_ram area

[Baoquan He]

On 12/19/22 at 09:09am, Lorenzo Stoakes wrote:
> On Mon, Dec 19, 2022 at 04:01:00PM +0800, Baoquan He wrote:
> > On 12/17/22 at 11:44am, Lorenzo Stoakes wrote:
> > > On Sat, Dec 17, 2022 at 09:54:30AM +0800, Baoquan He wrote:
> > > > @@ -2229,8 +2236,12 @@ void vm_unmap_ram(const void *mem, unsigned int count)
> > > >  		return;
> > > >  	}
> > > >
> > > > -	va = find_vmap_area(addr);
> > > > +	spin_lock(&vmap_area_lock);
> > > > +	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
> > > >  	BUG_ON(!va);
> > > > +	if (va)
> > > > +		va->flags &= ~VMAP_RAM;
> > > > +	spin_unlock(&vmap_area_lock);
> > > >  	debug_check_no_locks_freed((void *)va->va_start,
> > > >  				    (va->va_end - va->va_start));
> > > >  	free_unmap_vmap_area(va);
> > >
> > > Would it be better to perform the BUG_ON() after the lock is released? You
> > > already check if va exists before unmasking so it's safe.
> >
> > It's a little unclear to me why we care BUG_ON() is performed before or
> > after the lock released. We won't have a stable kernel after BUG_ON()(),
> > right?
> 
> BUG_ON()'s can be recoverable in user context and it would be a very simple
> change that would not fundamentally alter anything to simply place the added
> lines prior to the BUG_ON().
> 
> The code as-is doesn't really make sense anyway, you BUG_ON(!va) then check if
> va is non-null, then immediately the function afterwards passes va around as if
> it were not null, so I think it'd also be an aesthetic and logical improvement
> :)

In fact, I should not do the checking, but do the clearing anyway. If I
change it as below, does it look better to you?


diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 5e578563784a..369b848d097a 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -2253,8 +2253,7 @@ void vm_unmap_ram(const void *mem, unsigned int count)
 	spin_lock(&vmap_area_lock);
 	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
 	BUG_ON(!va);
-	if (va)
-		va->flags &= ~VMAP_RAM;
+	va->flags &= ~VMAP_RAM;
 	spin_unlock(&vmap_area_lock);
 	debug_check_no_locks_freed((void *)va->va_start,
 				    (va->va_end - va->va_start));

> 
> > >
> > > Also, do we want to clear VMAP_BLOCK here?
> >
> > I do, but I don't find a good place to clear VMAP_BLOCK.
> >
> > In v1, I tried to clear it in free_vmap_area_noflush() as below,
> > Uladzislau dislikes it. So I remove it. My thinking is when we unmap and
> > free the vmap area, the vmap_area is moved from vmap_area_root into
> > &free_vmap_area_root. When we allocate a new vmap_area via
> > alloc_vmap_area(), we will allocate a new va by kmem_cache_alloc_node(),
> > the va->flags must be 0. Seems not initializing it to 0 won't impact
> > thing.
> >
> 
> You are at this point clearing the VMAP_RAM flag though, so if it is unimportant
> what the flags are after this call, why are you clearing this one?

With my understanding, We had better do the clearing. Currently, from
the code, not doing the clearing won't cause issue. If possible, I would
like to clear it as below draft code.

> 
> It is just a little confusing, I wonder whether the VMAP_BLOCK flag is necessary
> at all, is it possible to just treat a non-VMAP_BLOCK VMAP_RAM area as if it
> were simply a fully occupied block? Do we gain much by the distinction?

Yeah, VMAP_BLOCK flag is necessary. vmap_block contains used region,
or dirty/free regions. While the non-vmap_blcok vm_map_ram area is
similar with the non vm_map_ram area. When reading out vm_map_ram
regions, vmap_block regions need be treated differently.

> 
> > diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> > index 5d3fd3e6fe09..d6f376060d83 100644
> > --- a/mm/vmalloc.c
> > +++ b/mm/vmalloc.c
> > @@ -1815,6 +1815,7 @@ static void free_vmap_area_noflush(struct vmap_area *va)
> >
> >         spin_lock(&vmap_area_lock);
> >         unlink_va(va, &vmap_area_root);
> > +       va->flags = 0;
> >         spin_unlock(&vmap_area_lock);
> >
> >         nr_lazy = atomic_long_add_return((va->va_end - va->va_start) >>
> >
> > >
> >
> 

Re: [PATCH v2 2/7] mm/vmalloc.c: add flags to mark vm_map_ram area

[Lorenzo Stoakes]

On Mon, Dec 19, 2022 at 08:24:47PM +0800, Baoquan He wrote:
> In fact, I should not do the checking, but do the clearing anyway. If I
> change it as below, does it look better to you?
>
>
> diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> index 5e578563784a..369b848d097a 100644
> --- a/mm/vmalloc.c
> +++ b/mm/vmalloc.c
> @@ -2253,8 +2253,7 @@ void vm_unmap_ram(const void *mem, unsigned int count)
>  	spin_lock(&vmap_area_lock);
>  	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
>  	BUG_ON(!va);
> -	if (va)
> -		va->flags &= ~VMAP_RAM;
> +	va->flags &= ~VMAP_RAM;
>  	spin_unlock(&vmap_area_lock);
>  	debug_check_no_locks_freed((void *)va->va_start,
>  				    (va->va_end - va->va_start));

This is better as it avoids the slightly contradictory situation of checking for
a condition we've asserted is not the case, but I would still far prefer keeping
this as-is and placing the unlock before the BUG_ON().

This avoids explicitly and knowingly holding a lock over a BUG_ON() and is
simple to implement, e.g.:-

  	spin_lock(&vmap_area_lock);
  	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
 	if (va)
 		va->flags &= ~VMAP_RAM;
  	spin_unlock(&vmap_area_lock);
  	BUG_ON(!va);

> > You are at this point clearing the VMAP_RAM flag though, so if it is unimportant
> > what the flags are after this call, why are you clearing this one?
>
> With my understanding, We had better do the clearing. Currently, from
> the code, not doing the clearing won't cause issue. If possible, I would
> like to clear it as below draft code.
>

Sure, it seems appropriate to clear it, I'm just unsure as to why you aren't
just clearing both flags? Perhaps just set va->flags = 0?

> >
> > It is just a little confusing, I wonder whether the VMAP_BLOCK flag is necessary
> > at all, is it possible to just treat a non-VMAP_BLOCK VMAP_RAM area as if it
> > were simply a fully occupied block? Do we gain much by the distinction?
>
> Yeah, VMAP_BLOCK flag is necessary. vmap_block contains used region,
> or dirty/free regions. While the non-vmap_blcok vm_map_ram area is
> similar with the non vm_map_ram area. When reading out vm_map_ram
> regions, vmap_block regions need be treated differently.

OK looking through again closely I see you're absolutely right, I wondered
whether you could somehow make a non-VMAP_BLOCK vread() operation be equivalent
to a block one (only across the whole mapping), but I don't think you can.

Re: [PATCH v2 2/7] mm/vmalloc.c: add flags to mark vm_map_ram area

[Baoquan He]

On 12/19/22 at 01:01pm, Lorenzo Stoakes wrote:
> On Mon, Dec 19, 2022 at 08:24:47PM +0800, Baoquan He wrote:
> > In fact, I should not do the checking, but do the clearing anyway. If I
> > change it as below, does it look better to you?
> >
> >
> > diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> > index 5e578563784a..369b848d097a 100644
> > --- a/mm/vmalloc.c
> > +++ b/mm/vmalloc.c
> > @@ -2253,8 +2253,7 @@ void vm_unmap_ram(const void *mem, unsigned int count)
> >  	spin_lock(&vmap_area_lock);
> >  	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
> >  	BUG_ON(!va);
> > -	if (va)
> > -		va->flags &= ~VMAP_RAM;
> > +	va->flags &= ~VMAP_RAM;
> >  	spin_unlock(&vmap_area_lock);
> >  	debug_check_no_locks_freed((void *)va->va_start,
> >  				    (va->va_end - va->va_start));
> 
> This is better as it avoids the slightly contradictory situation of checking for
> a condition we've asserted is not the case, but I would still far prefer keeping
> this as-is and placing the unlock before the BUG_ON().
> 
> This avoids explicitly and knowingly holding a lock over a BUG_ON() and is
> simple to implement, e.g.:-
> 
>   	spin_lock(&vmap_area_lock);
>   	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
>  	if (va)
>  		va->flags &= ~VMAP_RAM;
>   	spin_unlock(&vmap_area_lock);
>   	BUG_ON(!va);

OK, I will change like this.

> 
> > > You are at this point clearing the VMAP_RAM flag though, so if it is unimportant
> > > what the flags are after this call, why are you clearing this one?
> >
> > With my understanding, We had better do the clearing. Currently, from
> > the code, not doing the clearing won't cause issue. If possible, I would
> > like to clear it as below draft code.
> >
> 
> Sure, it seems appropriate to clear it, I'm just unsure as to why you aren't
> just clearing both flags? Perhaps just set va->flags = 0?

Hmm, for the two kinds of vm_map_ram areas, their code paths are
different. for unmapping vmap_block vm_map_ram, it goes through
vb_free(). I can only do the clearing in free_vmap_block().

  -->vm_unmap_ram()
     -->vb_free()
        -->free_vmap_block()

For non vmap_block vm_map_ram area, I can do the clearing in
vm_unmap_ram().
  -->vm_unmap_ram()
     -->__find_vmap_area()
     -->free_unmap_vmap_area()

As said earlier, clearing va->flags when unmap vm_map_ram area, or
clearing va->vm in remove_vm_area(), these have better be done.
However, not clearing them won't cause issue currently. Because the
old vmap_area is inserted into free_vmap_area_root, when we allocate a
new vmap_area through alloc_vmap_area(), we will get q new vmap_area
from vmap_area_cachep, the old va->flags or va->vm won't be carried into
the new vmap_area. Clearing them is a good to have, just in case.

Rethinking about this, I may need to do the clearing when freeing
vmap_block. Otherwise, people will be confused why the clearing is not
done.

@@ -1815,6 +1815,7 @@ static void free_vmap_area_noflush(struct vmap_area *va)

        spin_lock(&vmap_area_lock);
        unlink_va(va, &vmap_area_root);
+       va->flags = 0;
        spin_unlock(&vmap_area_lock);

        nr_lazy = atomic_long_add_return((va->va_end - va->va_start) >>

> 
> > >
> > > It is just a little confusing, I wonder whether the VMAP_BLOCK flag is necessary
> > > at all, is it possible to just treat a non-VMAP_BLOCK VMAP_RAM area as if it
> > > were simply a fully occupied block? Do we gain much by the distinction?
> >
> > Yeah, VMAP_BLOCK flag is necessary. vmap_block contains used region,
> > or dirty/free regions. While the non-vmap_blcok vm_map_ram area is
> > similar with the non vm_map_ram area. When reading out vm_map_ram
> > regions, vmap_block regions need be treated differently.
> 
> OK looking through again closely I see you're absolutely right, I wondered
> whether you could somehow make a non-VMAP_BLOCK vread() operation be equivalent
> to a block one (only across the whole mapping), but I don't think you can.

Right, it's much easier to do the same handling on non-VMAP_BLOCK vm_map_ram
as the normal vmap area.

Re: [PATCH v2 2/7] mm/vmalloc.c: add flags to mark vm_map_ram area

[Lorenzo Stoakes]

On Tue, Dec 20, 2022 at 08:14:15PM +0800, Baoquan He wrote:
> Hmm, for the two kinds of vm_map_ram areas, their code paths are
> different. for unmapping vmap_block vm_map_ram, it goes through
> vb_free(). I can only do the clearing in free_vmap_block().
>
>   -->vm_unmap_ram()
>      -->vb_free()
>         -->free_vmap_block()
>
> For non vmap_block vm_map_ram area, I can do the clearing in
> vm_unmap_ram().
>   -->vm_unmap_ram()
>      -->__find_vmap_area()
>      -->free_unmap_vmap_area()
>
> As said earlier, clearing va->flags when unmap vm_map_ram area, or
> clearing va->vm in remove_vm_area(), these have better be done.
> However, not clearing them won't cause issue currently. Because the
> old vmap_area is inserted into free_vmap_area_root, when we allocate a
> new vmap_area through alloc_vmap_area(), we will get q new vmap_area
> from vmap_area_cachep, the old va->flags or va->vm won't be carried into
> the new vmap_area. Clearing them is a good to have, just in case.
>

Sure, this is more so about avoiding confusion and perhaps some future change
which might not take into account that flag state could be invalid.

I guess logically speaking, this is still a block when you are unmapping ram, so
it's not unreasonable to retain the VMAP_BLOCK flag. In that case I'd say we're
good simply clearing VMAP_RAM here. Thanks for the explanations!

> Rethinking about this, I may need to do the clearing when freeing
> vmap_block. Otherwise, people will be confused why the clearing is not
> done.
>
> @@ -1815,6 +1815,7 @@ static void free_vmap_area_noflush(struct vmap_area *va)
>
>         spin_lock(&vmap_area_lock);
>         unlink_va(va, &vmap_area_root);
> +       va->flags = 0;
>         spin_unlock(&vmap_area_lock);
>
>         nr_lazy = atomic_long_add_return((va->va_end - va->va_start) >>
>

That sounds like a good idea!

Re: [PATCH v2 2/7] mm/vmalloc.c: add flags to mark vm_map_ram area

[Uladzislau Rezki]

> Through vmalloc API, a virtual kernel area is reserved for physical
> address mapping. And vmap_area is used to track them, while vm_struct
> is allocated to associate with the vmap_area to store more information
> and passed out.
> 
> However, area reserved via vm_map_ram() is an exception. It doesn't have
> vm_struct to associate with vmap_area. And we can't recognize the
> vmap_area with '->vm == NULL' as a vm_map_ram() area because the normal
> freeing path will set va->vm = NULL before unmapping, please see
> function remove_vm_area().
> 
A normal "free" path sets it to NULL in order to prevent a double-free
of same VA. We can avoid of touching the va->vm if needed and do an unlink
on entry in the remove_vm_area() when a lock is taken to find an area.

Will it help you?

> Meanwhile, there are two types of vm_map_ram area. One is the whole
> vmap_area being reserved and mapped at one time; the other is the
> whole vmap_area with VMAP_BLOCK_SIZE size being reserved, while mapped
> into split regions with smaller size several times via vb_alloc().
> 
> To mark the area reserved through vm_map_ram(), add flags field into
> struct vmap_area. Bit 0 indicates whether it's a vm_map_ram area,
> while bit 1 indicates whether it's a vmap_block type of vm_map_ram
> area.
> 
> This is a preparatoin for later use.
> 
> Signed-off-by: Baoquan He <bhe@redhat.com>
> ---
>  include/linux/vmalloc.h |  1 +
>  mm/vmalloc.c            | 22 +++++++++++++++++-----
>  2 files changed, 18 insertions(+), 5 deletions(-)
> 
> diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
> index 096d48aa3437..69250efa03d1 100644
> --- a/include/linux/vmalloc.h
> +++ b/include/linux/vmalloc.h
> @@ -76,6 +76,7 @@ struct vmap_area {
>  		unsigned long subtree_max_size; /* in "free" tree */
>  		struct vm_struct *vm;           /* in "busy" tree */
>  	};
> +	unsigned long flags; /* mark type of vm_map_ram area */
>  };
>  
>  /* archs that select HAVE_ARCH_HUGE_VMAP should override one or more of these */
> diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> index 5d3fd3e6fe09..190f29bbaaa7 100644
> --- a/mm/vmalloc.c
> +++ b/mm/vmalloc.c
> @@ -1586,7 +1586,8 @@ preload_this_cpu_lock(spinlock_t *lock, gfp_t gfp_mask, int node)
>  static struct vmap_area *alloc_vmap_area(unsigned long size,
>  				unsigned long align,
>  				unsigned long vstart, unsigned long vend,
> -				int node, gfp_t gfp_mask)
> +				int node, gfp_t gfp_mask,
> +				unsigned long va_flags)
>  {
>  	struct vmap_area *va;
>  	unsigned long freed;
> @@ -1630,6 +1631,7 @@ static struct vmap_area *alloc_vmap_area(unsigned long size,
>  	va->va_start = addr;
>  	va->va_end = addr + size;
>  	va->vm = NULL;
> +	va->flags = va_flags;
>  
>  	spin_lock(&vmap_area_lock);
>  	insert_vmap_area(va, &vmap_area_root, &vmap_area_list);
> @@ -1887,6 +1889,10 @@ struct vmap_area *find_vmap_area(unsigned long addr)
>  
>  #define VMAP_BLOCK_SIZE		(VMAP_BBMAP_BITS * PAGE_SIZE)
>  
> +#define VMAP_RAM		0x1
> +#define VMAP_BLOCK		0x2
> +#define VMAP_FLAGS_MASK		0x3
> 
Maybe to rename a VMAP_BLOCK to something like VMAP_BLOCK_RESERVED or
VMAP_PER_CPU_BLOCK?

>  struct vmap_block_queue {
>  	spinlock_t lock;
>  	struct list_head free;
> @@ -1962,7 +1968,8 @@ static void *new_vmap_block(unsigned int order, gfp_t gfp_mask)
>  
>  	va = alloc_vmap_area(VMAP_BLOCK_SIZE, VMAP_BLOCK_SIZE,
>  					VMALLOC_START, VMALLOC_END,
> -					node, gfp_mask);
> +					node, gfp_mask,
> +					VMAP_RAM|VMAP_BLOCK);
>
A new_vmap_block() is for a per-cpu path. As far as i see the VMAP_BLOCK
flag is used to mark a VA that corresponds to a reserved per-cpu free area.

Whereas a VMAP_RAM is for VA that was obtained over per-cpu path but
over alloc_vmap_area() thus a VA should be read out over "busy" tree
directly.

Why do you need to set here both VMAP_RAM and VMAP_BLOCK?

>  	if (IS_ERR(va)) {
>  		kfree(vb);
>  		return ERR_CAST(va);
> @@ -2229,8 +2236,12 @@ void vm_unmap_ram(const void *mem, unsigned int count)
>  		return;
>  	}
>  
> -	va = find_vmap_area(addr);
> +	spin_lock(&vmap_area_lock);
> +	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
>  	BUG_ON(!va);
> +	if (va)
> +		va->flags &= ~VMAP_RAM;
> +	spin_unlock(&vmap_area_lock);
>  	debug_check_no_locks_freed((void *)va->va_start,
>
Agree with Lorenzo. BUG_ON() should be out of spinlock(). Furthermore
i think it makes sense to go with WARN_ON_ONCE() and do not kill a system.
Instead emit a warning and bailout.

What do you think? Maybe separate patch for it?

>  				    (va->va_end - va->va_start));
>  	free_unmap_vmap_area(va);
> @@ -2265,7 +2276,8 @@ void *vm_map_ram(struct page **pages, unsigned int count, int node)
>  	} else {
>  		struct vmap_area *va;
>  		va = alloc_vmap_area(size, PAGE_SIZE,
> -				VMALLOC_START, VMALLOC_END, node, GFP_KERNEL);
> +				VMALLOC_START, VMALLOC_END,
> +				node, GFP_KERNEL, VMAP_RAM);
>  		if (IS_ERR(va))
>  			return NULL;
>  
> @@ -2505,7 +2517,7 @@ static struct vm_struct *__get_vm_area_node(unsigned long size,
>  	if (!(flags & VM_NO_GUARD))
>  		size += PAGE_SIZE;
>  
> -	va = alloc_vmap_area(size, align, start, end, node, gfp_mask);
> +	va = alloc_vmap_area(size, align, start, end, node, gfp_mask, 0);
>  	if (IS_ERR(va)) {
>  		kfree(area);
>  		return NULL;
>
I know we have already discussed the new parameter. But what if we just
use atomic_set operation to mark VA as either vmap-ram or vmap-block?

As for alloc_vmap_area() we set it just as zero.

--
Uladzislau Rezki

Re: [PATCH v2 2/7] mm/vmalloc.c: add flags to mark vm_map_ram area

[Baoquan He]

On 12/20/22 at 05:55pm, Uladzislau Rezki wrote:
> > Through vmalloc API, a virtual kernel area is reserved for physical
> > address mapping. And vmap_area is used to track them, while vm_struct
> > is allocated to associate with the vmap_area to store more information
> > and passed out.
> > 
> > However, area reserved via vm_map_ram() is an exception. It doesn't have
> > vm_struct to associate with vmap_area. And we can't recognize the
> > vmap_area with '->vm == NULL' as a vm_map_ram() area because the normal
> > freeing path will set va->vm = NULL before unmapping, please see
> > function remove_vm_area().
> > 
> A normal "free" path sets it to NULL in order to prevent a double-free
> of same VA. We can avoid of touching the va->vm if needed and do an unlink
> on entry in the remove_vm_area() when a lock is taken to find an area.
> 
> Will it help you?

Sorry, this mail sneaked out of my sight until I notice it now. My mutt
client makes it look like in the thread I talked with Lorenzo.

Yes, as I replied to your v2 patch, that is very helpful, thanks.

> 
> > Meanwhile, there are two types of vm_map_ram area. One is the whole
> > vmap_area being reserved and mapped at one time; the other is the
> > whole vmap_area with VMAP_BLOCK_SIZE size being reserved, while mapped
> > into split regions with smaller size several times via vb_alloc().
> > 
> > To mark the area reserved through vm_map_ram(), add flags field into
> > struct vmap_area. Bit 0 indicates whether it's a vm_map_ram area,
> > while bit 1 indicates whether it's a vmap_block type of vm_map_ram
> > area.
> > 
> > This is a preparatoin for later use.
> > 
> > Signed-off-by: Baoquan He <bhe@redhat.com>
> > ---
> >  include/linux/vmalloc.h |  1 +
> >  mm/vmalloc.c            | 22 +++++++++++++++++-----
> >  2 files changed, 18 insertions(+), 5 deletions(-)
> > 
> > diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
> > index 096d48aa3437..69250efa03d1 100644
> > --- a/include/linux/vmalloc.h
> > +++ b/include/linux/vmalloc.h
> > @@ -76,6 +76,7 @@ struct vmap_area {
> >  		unsigned long subtree_max_size; /* in "free" tree */
> >  		struct vm_struct *vm;           /* in "busy" tree */
> >  	};
> > +	unsigned long flags; /* mark type of vm_map_ram area */
> >  };
> >  
> >  /* archs that select HAVE_ARCH_HUGE_VMAP should override one or more of these */
> > diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> > index 5d3fd3e6fe09..190f29bbaaa7 100644
> > --- a/mm/vmalloc.c
> > +++ b/mm/vmalloc.c
> > @@ -1586,7 +1586,8 @@ preload_this_cpu_lock(spinlock_t *lock, gfp_t gfp_mask, int node)
> >  static struct vmap_area *alloc_vmap_area(unsigned long size,
> >  				unsigned long align,
> >  				unsigned long vstart, unsigned long vend,
> > -				int node, gfp_t gfp_mask)
> > +				int node, gfp_t gfp_mask,
> > +				unsigned long va_flags)
> >  {
> >  	struct vmap_area *va;
> >  	unsigned long freed;
> > @@ -1630,6 +1631,7 @@ static struct vmap_area *alloc_vmap_area(unsigned long size,
> >  	va->va_start = addr;
> >  	va->va_end = addr + size;
> >  	va->vm = NULL;
> > +	va->flags = va_flags;
> >  
> >  	spin_lock(&vmap_area_lock);
> >  	insert_vmap_area(va, &vmap_area_root, &vmap_area_list);
> > @@ -1887,6 +1889,10 @@ struct vmap_area *find_vmap_area(unsigned long addr)
> >  
> >  #define VMAP_BLOCK_SIZE		(VMAP_BBMAP_BITS * PAGE_SIZE)
> >  
> > +#define VMAP_RAM		0x1
> > +#define VMAP_BLOCK		0x2
> > +#define VMAP_FLAGS_MASK		0x3
> > 
> Maybe to rename a VMAP_BLOCK to something like VMAP_BLOCK_RESERVED or
> VMAP_PER_CPU_BLOCK?

Both VMAP_BLOCK or VMAP_PER_CPU_BLOCK look good to me, please see my
explanation at below.

> 
> >  struct vmap_block_queue {
> >  	spinlock_t lock;
> >  	struct list_head free;
> > @@ -1962,7 +1968,8 @@ static void *new_vmap_block(unsigned int order, gfp_t gfp_mask)
> >  
> >  	va = alloc_vmap_area(VMAP_BLOCK_SIZE, VMAP_BLOCK_SIZE,
> >  					VMALLOC_START, VMALLOC_END,
> > -					node, gfp_mask);
> > +					node, gfp_mask,
> > +					VMAP_RAM|VMAP_BLOCK);
> >
> A new_vmap_block() is for a per-cpu path. As far as i see the VMAP_BLOCK
> flag is used to mark a VA that corresponds to a reserved per-cpu free area.
> 
> Whereas a VMAP_RAM is for VA that was obtained over per-cpu path but
> over alloc_vmap_area() thus a VA should be read out over "busy" tree
> directly.
> 
> Why do you need to set here both VMAP_RAM and VMAP_BLOCK?

My understanding is that the vm_map_ram area has two types, one is
the vb percpu area via vb_alloc(), the other is allocated via
alloc_vmap_area(). While both of them is got from vm_map_ram()
interface, this is the main point that distinguishes the vm_map_ram area
than the normal vmalloc area, and this makes vm_map_ram area not owning
va->vm pointer. So here, I use flag VMAP_RAM to mark the vm_map_ram
area, including the two types; meanwhile, I add VMAP_BLOCK to mark out
the vb percpu area. 

I understand people could have different view about them, e.g as you
said, use VMAP_RAM to mark the type of vm_map_ram area allocated through
alloc_vmap_area(), while use VMAP_PER_CPU_BLOCK to mark vb percpu area
from vb_alloc. In this way, we may need to rename VMAP_RAM to reflect
the area allocated from alloc_vmap_area() only. Both is fine to me.

> 
> >  	if (IS_ERR(va)) {
> >  		kfree(vb);
> >  		return ERR_CAST(va);
> > @@ -2229,8 +2236,12 @@ void vm_unmap_ram(const void *mem, unsigned int count)
> >  		return;
> >  	}
> >  
> > -	va = find_vmap_area(addr);
> > +	spin_lock(&vmap_area_lock);
> > +	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
> >  	BUG_ON(!va);
> > +	if (va)
> > +		va->flags &= ~VMAP_RAM;
> > +	spin_unlock(&vmap_area_lock);
> >  	debug_check_no_locks_freed((void *)va->va_start,
> >
> Agree with Lorenzo. BUG_ON() should be out of spinlock(). Furthermore
> i think it makes sense to go with WARN_ON_ONCE() and do not kill a system.
> Instead emit a warning and bailout.
> 
> What do you think? Maybe separate patch for it?

Agree, your patch looks great to me. Thanks.

> 
> >  				    (va->va_end - va->va_start));
> >  	free_unmap_vmap_area(va);
> > @@ -2265,7 +2276,8 @@ void *vm_map_ram(struct page **pages, unsigned int count, int node)
> >  	} else {
> >  		struct vmap_area *va;
> >  		va = alloc_vmap_area(size, PAGE_SIZE,
> > -				VMALLOC_START, VMALLOC_END, node, GFP_KERNEL);
> > +				VMALLOC_START, VMALLOC_END,
> > +				node, GFP_KERNEL, VMAP_RAM);
> >  		if (IS_ERR(va))
> >  			return NULL;
> >  
> > @@ -2505,7 +2517,7 @@ static struct vm_struct *__get_vm_area_node(unsigned long size,
> >  	if (!(flags & VM_NO_GUARD))
> >  		size += PAGE_SIZE;
> >  
> > -	va = alloc_vmap_area(size, align, start, end, node, gfp_mask);
> > +	va = alloc_vmap_area(size, align, start, end, node, gfp_mask, 0);
> >  	if (IS_ERR(va)) {
> >  		kfree(area);
> >  		return NULL;
> >
> I know we have already discussed the new parameter. But what if we just
> use atomic_set operation to mark VA as either vmap-ram or vmap-block?
> 
> As for alloc_vmap_area() we set it just as zero.

Sorry, I may not get your point clearly, could you be more specific? 

Re: [PATCH v2 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas

[Baoquan He]

On 12/17/22 at 12:06pm, Lorenzo Stoakes wrote:
> On Sat, Dec 17, 2022 at 09:54:31AM +0800, Baoquan He wrote:
> > Currently, vread can read out vmalloc areas which is associated with
> > a vm_struct. While this doesn't work for areas created by vm_map_ram()
> > interface because it doesn't have an associated vm_struct. Then in vread(),
> > these areas will be skipped.
> >
> > Here, add a new function vb_vread() to read out areas managed by
> > vmap_block specifically. Then recognize vm_map_ram areas via vmap->flags
> > and handle them respectively.
> >
> > Signed-off-by: Baoquan He <bhe@redhat.com>
> > ---
> >  mm/vmalloc.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++------
> >  1 file changed, 59 insertions(+), 7 deletions(-)
> >
> > diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> > index 190f29bbaaa7..6612914459cf 100644
> > --- a/mm/vmalloc.c
> > +++ b/mm/vmalloc.c
> > @@ -3515,6 +3515,51 @@ static int aligned_vread(char *buf, char *addr, unsigned long count)
> >  	return copied;
> >  }
> >
> > +static void vb_vread(char *buf, char *addr, int count)
> > +{
> > +	char *start;
> > +	struct vmap_block *vb;
> > +	unsigned long offset;
> > +	unsigned int rs, re, n;
> > +
> > +	vb = xa_load(&vmap_blocks, addr_to_vb_idx((unsigned long)addr));
> > +
> > +	spin_lock(&vb->lock);
> > +	if (bitmap_empty(vb->used_map, VMAP_BBMAP_BITS)) {
> > +		spin_unlock(&vb->lock);
> > +		memset(buf, 0, count);
> > +		return;
> > +	}
> > +	for_each_set_bitrange(rs, re, vb->used_map, VMAP_BBMAP_BITS) {
> > +		if (!count)
> > +			break;
> > +		start = vmap_block_vaddr(vb->va->va_start, rs);
> > +		if (addr < start) {
> > +			if (count == 0)
> > +				break;
> > +			*buf = '\0';
> > +			buf++;
> > +			addr++;
> > +			count--;
> > +		}

Very sorry, Lorenzo, I just noticed this mail. It's very weird. Earlier,
Uladzislau's reply to patch 2/7 got to be seen in my mutt mail client 10
days later. I am not sure it's my mail client's problem, or a mail server
delivery issue.

> 
> I may be missing something here, but is this not essentially 'if the address is
> below a used region, write a single null byte into the buffer and continue,
> assuming we are now in a used area?'

Not sure if I got you. for_each_set_bitrange only iterates the used
regions. So in the for loop, what we do is fill zero into the buffer
below the used region, then read out the used region. You said
'continue', I don't understand what it means.

Assume we have 3 used regions in one vmap block, see below diagram. 
     |_______|______________|________|_____________|_____|_____________|______|
     |hole 0 |used region 0 |hole 1  |used region 1|hole2|used region2 |hole 3 |

hole 0,1,2 will be set zero when we iterate to the used region above
them. And the last hole 3 is set at the end of this function. Please
help point it out if I got it wrong.
 
> 
> This doesn't seem right, but I am happy to be corrected (perhaps we only expect
> to be a single byte below a start region?)
> 
> > +		/*it could start reading from the middle of used region*/
> > +		offset = offset_in_page(addr);
> > +		n = (re - rs + 1) << PAGE_SHIFT - offset;
> 
> The kernel bot has already picked up on this paren issue :)

Right, has been handled. Thanks.

> 
> > +		if (n > count)
> > +			n = count;
> > +		aligned_vread(buf, start+offset, n);
> > +
> > +		buf += n;
> > +		addr += n;
> > +		count -= n;
> > +	}
> > +	spin_unlock(&vb->lock);
> > +
> > +	/* zero-fill the left dirty or free regions */
> > +	if (count)
> > +		memset(buf, 0, count);
> > +}
> > +
> >  /**
> >   * vread() - read vmalloc area in a safe way.
> >   * @buf:     buffer for reading data
> > @@ -3545,7 +3590,7 @@ long vread(char *buf, char *addr, unsigned long count)
> >  	struct vm_struct *vm;
> >  	char *vaddr, *buf_start = buf;
> >  	unsigned long buflen = count;
> > -	unsigned long n;
> > +	unsigned long n, size, flags;
> >
> >  	addr = kasan_reset_tag(addr);
> >
> > @@ -3566,12 +3611,16 @@ long vread(char *buf, char *addr, unsigned long count)
> >  		if (!count)
> >  			break;
> >
> > -		if (!va->vm)
> > +		vm = va->vm;
> > +		flags = va->flags & VMAP_FLAGS_MASK;
> > +
> > +		if (!vm && !flags)
> >  			continue;
> >
> 
> This seems very delicate now as going forward, vm _could_ be NULL. In fact, a
> later patch in the series then goes on to use vm and assume it is not null (will
> comment).
> 
> I feel we should be very explicit after here asserting that vm != NULL.
> 
> > -		vm = va->vm;
> > -		vaddr = (char *) vm->addr;
> > -		if (addr >= vaddr + get_vm_area_size(vm))
> > +		vaddr = (char *) va->va_start;
> > +		size = flags ? va_size(va) : get_vm_area_size(vm);
> 
> For example here, I feel that this ternary should be reversed and based on
> whether vm is null, unles we expect vm to ever be non-null _and_ flags to be
> set?

Now only vm_map_ram area sets flags, all other types has vm not null.
Since those temporary state, e.g vm==NULL, flags==0 case has been
filtered out. Is below you suggested?

		size = (!vm&&flags)? va_size(va) : get_vm_area_size(vm);
		or
		size = (vm&&!flags)? get_vm_area_size(vm):va_size(va);

> 
> > +
> > +		if (addr >= vaddr + size)
> >  			continue;
> >  		while (addr < vaddr) {
> >  			if (count == 0)
> > @@ -3581,10 +3630,13 @@ long vread(char *buf, char *addr, unsigned long count)
> >  			addr++;
> >  			count--;
> >  		}
> > -		n = vaddr + get_vm_area_size(vm) - addr;
> > +		n = vaddr + size - addr;
> >  		if (n > count)
> >  			n = count;
> > -		if (!(vm->flags & VM_IOREMAP))
> > +
> > +		if ((flags & (VMAP_RAM|VMAP_BLOCK)) == (VMAP_RAM|VMAP_BLOCK))
> > +			vb_vread(buf, addr, n);
> > +		else if ((flags & VMAP_RAM) || !(vm->flags & VM_IOREMAP))
> >  			aligned_vread(buf, addr, n);
> >  		else /* IOREMAP area is treated as memory hole */
> >  			memset(buf, 0, n);
> > --
> > 2.34.1
> >
> 

Re: [PATCH v2 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas

[Lorenzo Stoakes]

On Wed, Jan 04, 2023 at 04:01:36PM +0800, Baoquan He wrote:
> On 12/17/22 at 12:06pm, Lorenzo Stoakes wrote:
> > On Sat, Dec 17, 2022 at 09:54:31AM +0800, Baoquan He wrote:
> > > Currently, vread can read out vmalloc areas which is associated with
> > > a vm_struct. While this doesn't work for areas created by vm_map_ram()
> > > interface because it doesn't have an associated vm_struct. Then in vread(),
> > > these areas will be skipped.
> > >
> > > Here, add a new function vb_vread() to read out areas managed by
> > > vmap_block specifically. Then recognize vm_map_ram areas via vmap->flags
> > > and handle them respectively.
> > >
> > > Signed-off-by: Baoquan He <bhe@redhat.com>
> > > ---
> > >  mm/vmalloc.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++------
> > >  1 file changed, 59 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> > > index 190f29bbaaa7..6612914459cf 100644
> > > --- a/mm/vmalloc.c
> > > +++ b/mm/vmalloc.c
> > > @@ -3515,6 +3515,51 @@ static int aligned_vread(char *buf, char *addr, unsigned long count)
> > >  	return copied;
> > >  }
> > >
> > > +static void vb_vread(char *buf, char *addr, int count)
> > > +{
> > > +	char *start;
> > > +	struct vmap_block *vb;
> > > +	unsigned long offset;
> > > +	unsigned int rs, re, n;
> > > +
> > > +	vb = xa_load(&vmap_blocks, addr_to_vb_idx((unsigned long)addr));
> > > +
> > > +	spin_lock(&vb->lock);
> > > +	if (bitmap_empty(vb->used_map, VMAP_BBMAP_BITS)) {
> > > +		spin_unlock(&vb->lock);
> > > +		memset(buf, 0, count);
> > > +		return;
> > > +	}
> > > +	for_each_set_bitrange(rs, re, vb->used_map, VMAP_BBMAP_BITS) {
> > > +		if (!count)
> > > +			break;
> > > +		start = vmap_block_vaddr(vb->va->va_start, rs);
> > > +		if (addr < start) {
> > > +			if (count == 0)
> > > +				break;
> > > +			*buf = '\0';
> > > +			buf++;
> > > +			addr++;
> > > +			count--;
> > > +		}
>
> Very sorry, Lorenzo, I just noticed this mail. It's very weird. Earlier,
> Uladzislau's reply to patch 2/7 got to be seen in my mutt mail client 10
> days later. I am not sure it's my mail client's problem, or a mail server
> delivery issue.
>

Odd, maybe try lei with mutt I find that works well :)

> >
> > I may be missing something here, but is this not essentially 'if the address is
> > below a used region, write a single null byte into the buffer and continue,
> > assuming we are now in a used area?'
>
> Not sure if I got you. for_each_set_bitrange only iterates the used
> regions. So in the for loop, what we do is fill zero into the buffer
> below the used region, then read out the used region. You said
> 'continue', I don't understand what it means.
>
> Assume we have 3 used regions in one vmap block, see below diagram.
>      |_______|______________|________|_____________|_____|_____________|______|
>      |hole 0 |used region 0 |hole 1  |used region 1|hole2|used region2 |hole 3 |
>
> hole 0,1,2 will be set zero when we iterate to the used region above
> them. And the last hole 3 is set at the end of this function. Please
> help point it out if I got it wrong.

Maybe let me rephrase:-

- We want to read `count` bytes from `addr` into `buf`
- We iterate over _used_ blocks, placing the start/end of each block in `rs`, `re`
  respectively.
- If we hit a block whose start address is above the one in which we are interested then:-
  - Place a zero byte in the buffer
  - Increment `addr` by 1 byte
  - Decrement the `count` by 1 byte
  - Carry on

I am seriously confused as to why we do this? Surely we should be checking
whether the range [addr, addr + count) overlaps this block at all, and only then
copying the relevant region?

It's the fact that blocks are at base page granularity but then this condition
is at byte granularity that is confusing to me (again it's _very_ possible I am
just being dumb here and missing something, just really want to understand this
better :)

> > > -		vm = va->vm;
> > > -		vaddr = (char *) vm->addr;
> > > -		if (addr >= vaddr + get_vm_area_size(vm))
> > > +		vaddr = (char *) va->va_start;
> > > +		size = flags ? va_size(va) : get_vm_area_size(vm);
> >
> > For example here, I feel that this ternary should be reversed and based on
> > whether vm is null, unles we expect vm to ever be non-null _and_ flags to be
> > set?
>
> Now only vm_map_ram area sets flags, all other types has vm not null.
> Since those temporary state, e.g vm==NULL, flags==0 case has been
> filtered out. Is below you suggested?
>
> 		size = (!vm&&flags)? va_size(va) : get_vm_area_size(vm);
> 		or
> 		size = (vm&&!flags)? get_vm_area_size(vm):va_size(va);
>

Sorry I didn't phrase this very well, my point is that the key thing you're
relying on here is whether vm exists in order to use it so I simply meant:-

size = vm ? get_vm_area_size(vm) : va_size(va);

This just makes it really explicit that you need vm to be non-NULL, and you've
already done the flags check before so this should suffice.

Re: [PATCH v2 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas

[Baoquan He]

On 01/04/23 at 08:20pm, Lorenzo Stoakes wrote:
> On Wed, Jan 04, 2023 at 04:01:36PM +0800, Baoquan He wrote:
> > On 12/17/22 at 12:06pm, Lorenzo Stoakes wrote:
> > > On Sat, Dec 17, 2022 at 09:54:31AM +0800, Baoquan He wrote:
> > > > Currently, vread can read out vmalloc areas which is associated with
> > > > a vm_struct. While this doesn't work for areas created by vm_map_ram()
> > > > interface because it doesn't have an associated vm_struct. Then in vread(),
> > > > these areas will be skipped.
> > > >
> > > > Here, add a new function vb_vread() to read out areas managed by
> > > > vmap_block specifically. Then recognize vm_map_ram areas via vmap->flags
> > > > and handle them respectively.
> > > >
> > > > Signed-off-by: Baoquan He <bhe@redhat.com>
> > > > ---
> > > >  mm/vmalloc.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++------
> > > >  1 file changed, 59 insertions(+), 7 deletions(-)
> > > >
> > > > diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> > > > index 190f29bbaaa7..6612914459cf 100644
> > > > --- a/mm/vmalloc.c
> > > > +++ b/mm/vmalloc.c
> > > > @@ -3515,6 +3515,51 @@ static int aligned_vread(char *buf, char *addr, unsigned long count)
> > > >  	return copied;
> > > >  }
> > > >
> > > > +static void vb_vread(char *buf, char *addr, int count)
> > > > +{
> > > > +	char *start;
> > > > +	struct vmap_block *vb;
> > > > +	unsigned long offset;
> > > > +	unsigned int rs, re, n;
> > > > +
> > > > +	vb = xa_load(&vmap_blocks, addr_to_vb_idx((unsigned long)addr));
> > > > +
> > > > +	spin_lock(&vb->lock);
> > > > +	if (bitmap_empty(vb->used_map, VMAP_BBMAP_BITS)) {
> > > > +		spin_unlock(&vb->lock);
> > > > +		memset(buf, 0, count);
> > > > +		return;
> > > > +	}
> > > > +	for_each_set_bitrange(rs, re, vb->used_map, VMAP_BBMAP_BITS) {
> > > > +		if (!count)
> > > > +			break;
> > > > +		start = vmap_block_vaddr(vb->va->va_start, rs);
> > > > +		if (addr < start) {
> > > > +			if (count == 0)
> > > > +				break;
> > > > +			*buf = '\0';
> > > > +			buf++;
> > > > +			addr++;
> > > > +			count--;
> > > > +		}
> >
> > Very sorry, Lorenzo, I just noticed this mail. It's very weird. Earlier,
> > Uladzislau's reply to patch 2/7 got to be seen in my mutt mail client 10
> > days later. I am not sure it's my mail client's problem, or a mail server
> > delivery issue.
> >
> 
> Odd, maybe try lei with mutt I find that works well :)

Sorry for late reply, just come back from vacation.

Lei + mutt sounds like a good idea. I relied too much on mbsync in the
past.

> 
> > >
> > > I may be missing something here, but is this not essentially 'if the address is
> > > below a used region, write a single null byte into the buffer and continue,
> > > assuming we are now in a used area?'
> >
> > Not sure if I got you. for_each_set_bitrange only iterates the used
> > regions. So in the for loop, what we do is fill zero into the buffer
> > below the used region, then read out the used region. You said
> > 'continue', I don't understand what it means.
> >
> > Assume we have 3 used regions in one vmap block, see below diagram.
> >      |_______|______________|________|_____________|_____|_____________|______|
> >      |hole 0 |used region 0 |hole 1  |used region 1|hole2|used region2 |hole 3 |
> >
> > hole 0,1,2 will be set zero when we iterate to the used region above
> > them. And the last hole 3 is set at the end of this function. Please
> > help point it out if I got it wrong.
> 
> Maybe let me rephrase:-
> 
> - We want to read `count` bytes from `addr` into `buf`
> - We iterate over _used_ blocks, placing the start/end of each block in `rs`, `re`
>   respectively.
> - If we hit a block whose start address is above the one in which we are interested then:-
>   - Place a zero byte in the buffer
>   - Increment `addr` by 1 byte
>   - Decrement the `count` by 1 byte
>   - Carry on
> 
> I am seriously confused as to why we do this? Surely we should be checking
> whether the range [addr, addr + count) overlaps this block at all, and only then
> copying the relevant region?

I guessed this could be your concern, but not very sure. That
code block is copied from vread(), and my considerations are:
1) We could starting read from any position of kcore file. /proc/kcore
is a elf file logically, it's allowed to read from anywhere, right? We
don't have to read the entire file always. So the vmap_block reading is
not necessarily page aligned. It's very similar with the empty area
filling in vread().
2) memset() is doing the byte by byte reading. We can 
change code as below. While we don't save the effort very much, and we
need introduce an extra local variable to store the value of
(start - end).

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index b054081aa66b..dce4a843a9e8 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -3576,6 +3576,15 @@ static void vmap_ram_vread(char *buf, char *addr, int count, unsigned long flags
+		if (addr < start) {
+			int num = min(count, (start - add));
+			memset(buf, 0, count);
+			count -= num;
+			if (count == 0)
+				break;
+			buf -= num;
+			addr -= num;
+		}
 		/*it could start reading from the middle of used region*/
 		offset = offset_in_page(addr);
 		n = ((re - rs + 1) << PAGE_SHIFT) - offset;

void *memset(void *s, int c, size_t count)
{
        char *xs = s;
 
        while (count--)
                *xs++ = c;
        return s;
}

> 
> It's the fact that blocks are at base page granularity but then this condition
> is at byte granularity that is confusing to me (again it's _very_ possible I am
> just being dumb here and missing something, just really want to understand this
> better :)

I like this kind of reviewing with careful checking and deep thinking.
For above code block, I think it's a very great point. From my point of
view, I like the memset version better, it's easier to understand. If we
all agree, we can change it to take memset way. When I made patches,
several issues related to patches were hovering in my mind at the same
time, I did not consider this one so deeply.

> 
> > > > -		vm = va->vm;
> > > > -		vaddr = (char *) vm->addr;
> > > > -		if (addr >= vaddr + get_vm_area_size(vm))
> > > > +		vaddr = (char *) va->va_start;
> > > > +		size = flags ? va_size(va) : get_vm_area_size(vm);
> > >
> > > For example here, I feel that this ternary should be reversed and based on
> > > whether vm is null, unles we expect vm to ever be non-null _and_ flags to be
> > > set?
> >
> > Now only vm_map_ram area sets flags, all other types has vm not null.
> > Since those temporary state, e.g vm==NULL, flags==0 case has been
> > filtered out. Is below you suggested?
> >
> > 		size = (!vm&&flags)? va_size(va) : get_vm_area_size(vm);
> > 		or
> > 		size = (vm&&!flags)? get_vm_area_size(vm):va_size(va);
> >
> 
> Sorry I didn't phrase this very well, my point is that the key thing you're
> relying on here is whether vm exists in order to use it so I simply meant:-
> 
> size = vm ? get_vm_area_size(vm) : va_size(va);
> 
> This just makes it really explicit that you need vm to be non-NULL, and you've
> already done the flags check before so this should suffice.

Sounds reasonable, I will copy above line you pasted. Thanks a lot.

Re: [PATCH v2 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas

[Lorenzo Stoakes]

On Mon, Jan 09, 2023 at 12:35:04PM +0800, Baoquan He wrote:
> Sorry for late reply, just come back from vacation.

Hope you had a great time! :)

>
> Lei + mutt sounds like a good idea. I relied too much on mbsync in the
> past.
>

Yeah I'm finding it works well,
https://josefbacik.github.io/kernel/2021/10/18/lei-and-b4.html is a handy guide!

[snip]
> > Maybe let me rephrase:-
> >
> > - We want to read `count` bytes from `addr` into `buf`
> > - We iterate over _used_ blocks, placing the start/end of each block in `rs`, `re`
> >   respectively.
> > - If we hit a block whose start address is above the one in which we are interested then:-
> >   - Place a zero byte in the buffer
> >   - Increment `addr` by 1 byte
> >   - Decrement the `count` by 1 byte
> >   - Carry on
> >
> > I am seriously confused as to why we do this? Surely we should be checking
> > whether the range [addr, addr + count) overlaps this block at all, and only then
> > copying the relevant region?
>
> I guessed this could be your concern, but not very sure. That
> code block is copied from vread(), and my considerations are:
> 1) We could starting read from any position of kcore file. /proc/kcore
> is a elf file logically, it's allowed to read from anywhere, right? We
> don't have to read the entire file always. So the vmap_block reading is
> not necessarily page aligned. It's very similar with the empty area
> filling in vread().
> 2) memset() is doing the byte by byte reading. We can
> change code as below. While we don't save the effort very much, and we
> need introduce an extra local variable to store the value of
> (start - end).
>
> diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> index b054081aa66b..dce4a843a9e8 100644
> --- a/mm/vmalloc.c
> +++ b/mm/vmalloc.c
> @@ -3576,6 +3576,15 @@ static void vmap_ram_vread(char *buf, char *addr, int count, unsigned long flags
> +		if (addr < start) {
> +			int num = min(count, (start - add));
> +			memset(buf, 0, count);
> +			count -= num;
> +			if (count == 0)
> +				break;
> +			buf -= num;
> +			addr -= num;
> +		}
>  		/*it could start reading from the middle of used region*/
>  		offset = offset_in_page(addr);
>  		n = ((re - rs + 1) << PAGE_SHIFT) - offset;
>

The difference with vread() is that uses a while loop rather than an if clause
so operates over the whole region byte-by-byte, your original would only do this
for 1 byte so now things make a lot more sense!

This approach makes sense though I'd put the count == 0 check first and nit
'add' should be 'addr'.

I am happy with either this or a while loop instead of an if which it seems is
what the original issue was!

> void *memset(void *s, int c, size_t count)
> {
>         char *xs = s;
>
>         while (count--)
>                 *xs++ = c;
>         return s;
> }
>
> >
> > It's the fact that blocks are at base page granularity but then this condition
> > is at byte granularity that is confusing to me (again it's _very_ possible I am
> > just being dumb here and missing something, just really want to understand this
> > better :)
>
> I like this kind of reviewing with careful checking and deep thinking.
> For above code block, I think it's a very great point. From my point of
> view, I like the memset version better, it's easier to understand. If we
> all agree, we can change it to take memset way. When I made patches,
> several issues related to patches were hovering in my mind at the same
> time, I did not consider this one so deeply.
>

Thanks :) I have a particular interest in vmalloc so am happy to dive in with
reviews here!

> >
> > > > > -		vm = va->vm;
> > > > > -		vaddr = (char *) vm->addr;
> > > > > -		if (addr >= vaddr + get_vm_area_size(vm))
> > > > > +		vaddr = (char *) va->va_start;
> > > > > +		size = flags ? va_size(va) : get_vm_area_size(vm);
> > > >
> > > > For example here, I feel that this ternary should be reversed and based on
> > > > whether vm is null, unles we expect vm to ever be non-null _and_ flags to be
> > > > set?
> > >
> > > Now only vm_map_ram area sets flags, all other types has vm not null.
> > > Since those temporary state, e.g vm==NULL, flags==0 case has been
> > > filtered out. Is below you suggested?
> > >
> > > 		size = (!vm&&flags)? va_size(va) : get_vm_area_size(vm);
> > > 		or
> > > 		size = (vm&&!flags)? get_vm_area_size(vm):va_size(va);
> > >
> >
> > Sorry I didn't phrase this very well, my point is that the key thing you're
> > relying on here is whether vm exists in order to use it so I simply meant:-
> >
> > size = vm ? get_vm_area_size(vm) : va_size(va);
> >
> > This just makes it really explicit that you need vm to be non-NULL, and you've
> > already done the flags check before so this should suffice.
>
> Sounds reasonable, I will copy above line you pasted. Thanks a lot.
>

Cheers!

Re: [PATCH v2 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas

[Baoquan He]

On 01/09/23 at 07:12am, Lorenzo Stoakes wrote:
> On Mon, Jan 09, 2023 at 12:35:04PM +0800, Baoquan He wrote:
> > Sorry for late reply, just come back from vacation.
> 
> Hope you had a great time! :)

Thanks.

> 
> >
> > Lei + mutt sounds like a good idea. I relied too much on mbsync in the
> > past.
> >
> 
> Yeah I'm finding it works well,
> https://josefbacik.github.io/kernel/2021/10/18/lei-and-b4.html is a handy guide!

Very helpful, will try.

> 
> [snip]
> > > Maybe let me rephrase:-
> > >
> > > - We want to read `count` bytes from `addr` into `buf`
> > > - We iterate over _used_ blocks, placing the start/end of each block in `rs`, `re`
> > >   respectively.
> > > - If we hit a block whose start address is above the one in which we are interested then:-
> > >   - Place a zero byte in the buffer
> > >   - Increment `addr` by 1 byte
> > >   - Decrement the `count` by 1 byte
> > >   - Carry on
> > >
> > > I am seriously confused as to why we do this? Surely we should be checking
> > > whether the range [addr, addr + count) overlaps this block at all, and only then
> > > copying the relevant region?
> >
> > I guessed this could be your concern, but not very sure. That
> > code block is copied from vread(), and my considerations are:
> > 1) We could starting read from any position of kcore file. /proc/kcore
> > is a elf file logically, it's allowed to read from anywhere, right? We
> > don't have to read the entire file always. So the vmap_block reading is
> > not necessarily page aligned. It's very similar with the empty area
> > filling in vread().
> > 2) memset() is doing the byte by byte reading. We can
> > change code as below. While we don't save the effort very much, and we
> > need introduce an extra local variable to store the value of
> > (start - end).
> >
> > diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> > index b054081aa66b..dce4a843a9e8 100644
> > --- a/mm/vmalloc.c
> > +++ b/mm/vmalloc.c
> > @@ -3576,6 +3576,15 @@ static void vmap_ram_vread(char *buf, char *addr, int count, unsigned long flags
> > +		if (addr < start) {
> > +			int num = min(count, (start - add));
> > +			memset(buf, 0, count);
> > +			count -= num;
> > +			if (count == 0)
> > +				break;
> > +			buf -= num;
> > +			addr -= num;
> > +		}
> >  		/*it could start reading from the middle of used region*/
> >  		offset = offset_in_page(addr);
> >  		n = ((re - rs + 1) << PAGE_SHIFT) - offset;
> >
> 
> The difference with vread() is that uses a while loop rather than an if clause
> so operates over the whole region byte-by-byte, your original would only do this
> for 1 byte so now things make a lot more sense!

Oops, that 'if clause' is a code bug, I finally got your point until
now, my dumb head.

> 
> This approach makes sense though I'd put the count == 0 check first and nit
> 'add' should be 'addr'.
> 
> I am happy with either this or a while loop instead of an if which it seems is
> what the original issue was!

OK, I will think again which one is more appropriate.

> 
> > void *memset(void *s, int c, size_t count)
> > {
> >         char *xs = s;
> >
> >         while (count--)
> >                 *xs++ = c;
> >         return s;
> > }
> >
> > >
> > > It's the fact that blocks are at base page granularity but then this condition
> > > is at byte granularity that is confusing to me (again it's _very_ possible I am
> > > just being dumb here and missing something, just really want to understand this
> > > better :)
> >
> > I like this kind of reviewing with careful checking and deep thinking.
> > For above code block, I think it's a very great point. From my point of
> > view, I like the memset version better, it's easier to understand. If we
> > all agree, we can change it to take memset way. When I made patches,
> > several issues related to patches were hovering in my mind at the same
> > time, I did not consider this one so deeply.
> >
> 
> Thanks :) I have a particular interest in vmalloc so am happy to dive in with
> reviews here!
> 
> > >
> > > > > > -		vm = va->vm;
> > > > > > -		vaddr = (char *) vm->addr;
> > > > > > -		if (addr >= vaddr + get_vm_area_size(vm))
> > > > > > +		vaddr = (char *) va->va_start;
> > > > > > +		size = flags ? va_size(va) : get_vm_area_size(vm);
> > > > >
> > > > > For example here, I feel that this ternary should be reversed and based on
> > > > > whether vm is null, unles we expect vm to ever be non-null _and_ flags to be
> > > > > set?
> > > >
> > > > Now only vm_map_ram area sets flags, all other types has vm not null.
> > > > Since those temporary state, e.g vm==NULL, flags==0 case has been
> > > > filtered out. Is below you suggested?
> > > >
> > > > 		size = (!vm&&flags)? va_size(va) : get_vm_area_size(vm);
> > > > 		or
> > > > 		size = (vm&&!flags)? get_vm_area_size(vm):va_size(va);
> > > >
> > >
> > > Sorry I didn't phrase this very well, my point is that the key thing you're
> > > relying on here is whether vm exists in order to use it so I simply meant:-
> > >
> > > size = vm ? get_vm_area_size(vm) : va_size(va);
> > >
> > > This just makes it really explicit that you need vm to be non-NULL, and you've
> > > already done the flags check before so this should suffice.
> >
> > Sounds reasonable, I will copy above line you pasted. Thanks a lot.

Thanks again for careful reviewing and great suggestions and findings.

Re: [PATCH v2 2/7] mm/vmalloc.c: add flags to mark vm_map_ram area

[Baoquan He]

Hi Uladzislau Rezki，

On 12/23/22 at 12:14pm, Baoquan He wrote:
> On 12/20/22 at 05:55pm, Uladzislau Rezki wrote:
......
 > >  	spin_lock(&vmap_area_lock);
> > >  	insert_vmap_area(va, &vmap_area_root, &vmap_area_list);
> > > @@ -1887,6 +1889,10 @@ struct vmap_area *find_vmap_area(unsigned long addr)
> > >  
> > >  #define VMAP_BLOCK_SIZE		(VMAP_BBMAP_BITS * PAGE_SIZE)
> > >  
> > > +#define VMAP_RAM		0x1
> > > +#define VMAP_BLOCK		0x2
> > > +#define VMAP_FLAGS_MASK		0x3
> > > 
> > Maybe to rename a VMAP_BLOCK to something like VMAP_BLOCK_RESERVED or
> > VMAP_PER_CPU_BLOCK?
> 
> Both VMAP_BLOCK or VMAP_PER_CPU_BLOCK look good to me, please see my
> explanation at below.
> 
> > 
> > >  struct vmap_block_queue {
> > >  	spinlock_t lock;
> > >  	struct list_head free;
> > > @@ -1962,7 +1968,8 @@ static void *new_vmap_block(unsigned int order, gfp_t gfp_mask)
> > >  
> > >  	va = alloc_vmap_area(VMAP_BLOCK_SIZE, VMAP_BLOCK_SIZE,
> > >  					VMALLOC_START, VMALLOC_END,
> > > -					node, gfp_mask);
> > > +					node, gfp_mask,
> > > +					VMAP_RAM|VMAP_BLOCK);
> > >
> > A new_vmap_block() is for a per-cpu path. As far as i see the VMAP_BLOCK
> > flag is used to mark a VA that corresponds to a reserved per-cpu free area.
> > 
> > Whereas a VMAP_RAM is for VA that was obtained over per-cpu path but
> > over alloc_vmap_area() thus a VA should be read out over "busy" tree
> > directly.

Rethinking about the vmap->flags and the bit0->VMAP_RAM,
bit1->VMAP_BLOCK correspondence, it looks better to use bit0->VMAP_RAM
to indicate the vm_map_ram area, no matter how it's handled inside
vm_map_ram() interface; and use bit1->VMAP_BLOCK to mark out the special
vm_map_ram area which is further subdivided and managed by struct
vmap_block. With these, you can see that we can identify vm_map_ram area
and treat it as one type of vmalloc area, e.g in vread(), s_show().

Means when we are talking about vm_map_ram areas, we use
(vmap->flags & VMAP_RAM) to recognize them; when we need to
differentiate and handle vm_map_ram areas respectively, we use
(vmap->flags & VMAP_BLOCK) to pick out the area which is further managed
by vmap_block. Please help check if this is OK to you.

> > 
> > Why do you need to set here both VMAP_RAM and VMAP_BLOCK?
> 
> My understanding is that the vm_map_ram area has two types, one is
> the vb percpu area via vb_alloc(), the other is allocated via
> alloc_vmap_area(). While both of them is got from vm_map_ram()
> interface, this is the main point that distinguishes the vm_map_ram area
> than the normal vmalloc area, and this makes vm_map_ram area not owning
> va->vm pointer. So here, I use flag VMAP_RAM to mark the vm_map_ram
> area, including the two types; meanwhile, I add VMAP_BLOCK to mark out
> the vb percpu area. 
> 
> I understand people could have different view about them, e.g as you
> said, use VMAP_RAM to mark the type of vm_map_ram area allocated through
> alloc_vmap_area(), while use VMAP_PER_CPU_BLOCK to mark vb percpu area
> from vb_alloc. In this way, we may need to rename VMAP_RAM to reflect
> the area allocated from alloc_vmap_area() only. Both is fine to me.
> 
> > 
> > >  	if (IS_ERR(va)) {
> > >  		kfree(vb);
> > >  		return ERR_CAST(va);
> > > @@ -2229,8 +2236,12 @@ void vm_unmap_ram(const void *mem, unsigned int count)
> > >  		return;
> > >  	}
> > >  
> > > -	va = find_vmap_area(addr);
> > > +	spin_lock(&vmap_area_lock);
> > > +	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
> > >  	BUG_ON(!va);
> > > +	if (va)
> > > +		va->flags &= ~VMAP_RAM;
> > > +	spin_unlock(&vmap_area_lock);
> > >  	debug_check_no_locks_freed((void *)va->va_start,
> > >
> > Agree with Lorenzo. BUG_ON() should be out of spinlock(). Furthermore
> > i think it makes sense to go with WARN_ON_ONCE() and do not kill a system.
> > Instead emit a warning and bailout.
> > 
> > What do you think? Maybe separate patch for it?
> 
> Agree, your patch looks great to me. Thanks.
> 
> > 
> > >  				    (va->va_end - va->va_start));
> > >  	free_unmap_vmap_area(va);
> > > @@ -2265,7 +2276,8 @@ void *vm_map_ram(struct page **pages, unsigned int count, int node)
> > >  	} else {
> > >  		struct vmap_area *va;
> > >  		va = alloc_vmap_area(size, PAGE_SIZE,
> > > -				VMALLOC_START, VMALLOC_END, node, GFP_KERNEL);
> > > +				VMALLOC_START, VMALLOC_END,
> > > +				node, GFP_KERNEL, VMAP_RAM);
> > >  		if (IS_ERR(va))
> > >  			return NULL;
> > >  
> > > @@ -2505,7 +2517,7 @@ static struct vm_struct *__get_vm_area_node(unsigned long size,
> > >  	if (!(flags & VM_NO_GUARD))
> > >  		size += PAGE_SIZE;
> > >  
> > > -	va = alloc_vmap_area(size, align, start, end, node, gfp_mask);
> > > +	va = alloc_vmap_area(size, align, start, end, node, gfp_mask, 0);
> > >  	if (IS_ERR(va)) {
> > >  		kfree(area);
> > >  		return NULL;
> > >
> > I know we have already discussed the new parameter. But what if we just
> > use atomic_set operation to mark VA as either vmap-ram or vmap-block?

As I replied at above, I take the vm_map_ram as one kind of vmalloc
area, and mark out the percpu vmap block handling of vm_map_ram area.
Seems the passing in the flags through function parameter is better. Not
sure if I got your suggestion correctly, and my code change is
appropriate. I have sent v3 according to your and Lorenzo's comments and
suggestion, and my rethinking after reading your words. I make some
adjustment to try to remove misundersanding or confusion when reading
patch and code. Please help check if it's OK.

Re: [PATCH v2 2/7] mm/vmalloc.c: add flags to mark vm_map_ram area

[Uladzislau Rezki]

On Fri, Jan 13, 2023 at 11:55:07AM +0800, Baoquan He wrote:
> Hi Uladzislau Rezki，
> 
> On 12/23/22 at 12:14pm, Baoquan He wrote:
> > On 12/20/22 at 05:55pm, Uladzislau Rezki wrote:
> ......
>  > >  	spin_lock(&vmap_area_lock);
> > > >  	insert_vmap_area(va, &vmap_area_root, &vmap_area_list);
> > > > @@ -1887,6 +1889,10 @@ struct vmap_area *find_vmap_area(unsigned long addr)
> > > >  
> > > >  #define VMAP_BLOCK_SIZE		(VMAP_BBMAP_BITS * PAGE_SIZE)
> > > >  
> > > > +#define VMAP_RAM		0x1
> > > > +#define VMAP_BLOCK		0x2
> > > > +#define VMAP_FLAGS_MASK		0x3
> > > > 
> > > Maybe to rename a VMAP_BLOCK to something like VMAP_BLOCK_RESERVED or
> > > VMAP_PER_CPU_BLOCK?
> > 
> > Both VMAP_BLOCK or VMAP_PER_CPU_BLOCK look good to me, please see my
> > explanation at below.
> > 
> > > 
> > > >  struct vmap_block_queue {
> > > >  	spinlock_t lock;
> > > >  	struct list_head free;
> > > > @@ -1962,7 +1968,8 @@ static void *new_vmap_block(unsigned int order, gfp_t gfp_mask)
> > > >  
> > > >  	va = alloc_vmap_area(VMAP_BLOCK_SIZE, VMAP_BLOCK_SIZE,
> > > >  					VMALLOC_START, VMALLOC_END,
> > > > -					node, gfp_mask);
> > > > +					node, gfp_mask,
> > > > +					VMAP_RAM|VMAP_BLOCK);
> > > >
> > > A new_vmap_block() is for a per-cpu path. As far as i see the VMAP_BLOCK
> > > flag is used to mark a VA that corresponds to a reserved per-cpu free area.
> > > 
> > > Whereas a VMAP_RAM is for VA that was obtained over per-cpu path but
> > > over alloc_vmap_area() thus a VA should be read out over "busy" tree
> > > directly.
> 
> Rethinking about the vmap->flags and the bit0->VMAP_RAM,
> bit1->VMAP_BLOCK correspondence, it looks better to use bit0->VMAP_RAM
> to indicate the vm_map_ram area, no matter how it's handled inside
> vm_map_ram() interface; and use bit1->VMAP_BLOCK to mark out the special
> vm_map_ram area which is further subdivided and managed by struct
> vmap_block. With these, you can see that we can identify vm_map_ram area
> and treat it as one type of vmalloc area, e.g in vread(), s_show().
> 
> Means when we are talking about vm_map_ram areas, we use
> (vmap->flags & VMAP_RAM) to recognize them; when we need to
> differentiate and handle vm_map_ram areas respectively, we use
> (vmap->flags & VMAP_BLOCK) to pick out the area which is further managed
> by vmap_block. Please help check if this is OK to you.
> 
> > > 
> > > Why do you need to set here both VMAP_RAM and VMAP_BLOCK?
> > 
> > My understanding is that the vm_map_ram area has two types, one is
> > the vb percpu area via vb_alloc(), the other is allocated via
> > alloc_vmap_area(). While both of them is got from vm_map_ram()
> > interface, this is the main point that distinguishes the vm_map_ram area
> > than the normal vmalloc area, and this makes vm_map_ram area not owning
> > va->vm pointer. So here, I use flag VMAP_RAM to mark the vm_map_ram
> > area, including the two types; meanwhile, I add VMAP_BLOCK to mark out
> > the vb percpu area. 
> > 
> > I understand people could have different view about them, e.g as you
> > said, use VMAP_RAM to mark the type of vm_map_ram area allocated through
> > alloc_vmap_area(), while use VMAP_PER_CPU_BLOCK to mark vb percpu area
> > from vb_alloc. In this way, we may need to rename VMAP_RAM to reflect
> > the area allocated from alloc_vmap_area() only. Both is fine to me.
> > 
> > > 
> > > >  	if (IS_ERR(va)) {
> > > >  		kfree(vb);
> > > >  		return ERR_CAST(va);
> > > > @@ -2229,8 +2236,12 @@ void vm_unmap_ram(const void *mem, unsigned int count)
> > > >  		return;
> > > >  	}
> > > >  
> > > > -	va = find_vmap_area(addr);
> > > > +	spin_lock(&vmap_area_lock);
> > > > +	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
> > > >  	BUG_ON(!va);
> > > > +	if (va)
> > > > +		va->flags &= ~VMAP_RAM;
> > > > +	spin_unlock(&vmap_area_lock);
> > > >  	debug_check_no_locks_freed((void *)va->va_start,
> > > >
> > > Agree with Lorenzo. BUG_ON() should be out of spinlock(). Furthermore
> > > i think it makes sense to go with WARN_ON_ONCE() and do not kill a system.
> > > Instead emit a warning and bailout.
> > > 
> > > What do you think? Maybe separate patch for it?
> > 
> > Agree, your patch looks great to me. Thanks.
> > 
> > > 
> > > >  				    (va->va_end - va->va_start));
> > > >  	free_unmap_vmap_area(va);
> > > > @@ -2265,7 +2276,8 @@ void *vm_map_ram(struct page **pages, unsigned int count, int node)
> > > >  	} else {
> > > >  		struct vmap_area *va;
> > > >  		va = alloc_vmap_area(size, PAGE_SIZE,
> > > > -				VMALLOC_START, VMALLOC_END, node, GFP_KERNEL);
> > > > +				VMALLOC_START, VMALLOC_END,
> > > > +				node, GFP_KERNEL, VMAP_RAM);
> > > >  		if (IS_ERR(va))
> > > >  			return NULL;
> > > >  
> > > > @@ -2505,7 +2517,7 @@ static struct vm_struct *__get_vm_area_node(unsigned long size,
> > > >  	if (!(flags & VM_NO_GUARD))
> > > >  		size += PAGE_SIZE;
> > > >  
> > > > -	va = alloc_vmap_area(size, align, start, end, node, gfp_mask);
> > > > +	va = alloc_vmap_area(size, align, start, end, node, gfp_mask, 0);
> > > >  	if (IS_ERR(va)) {
> > > >  		kfree(area);
> > > >  		return NULL;
> > > >
> > > I know we have already discussed the new parameter. But what if we just
> > > use atomic_set operation to mark VA as either vmap-ram or vmap-block?
> 
> As I replied at above, I take the vm_map_ram as one kind of vmalloc
> area, and mark out the percpu vmap block handling of vm_map_ram area.
> Seems the passing in the flags through function parameter is better. Not
> sure if I got your suggestion correctly, and my code change is
> appropriate. I have sent v3 according to your and Lorenzo's comments and
> suggestion, and my rethinking after reading your words. I make some
> adjustment to try to remove misundersanding or confusion when reading
> patch and code. Please help check if it's OK.
> 
OK, if we decided to go with a parameter it is OK, it is not a big deal
and complexity. If needed it can be adjusted later on if there is a
need.

Thanks!

--
Uladzislau Rezki

Re: [PATCH v2 2/7] mm/vmalloc.c: add flags to mark vm_map_ram area

[Baoquan He]

On 01/16/23 at 06:54pm, Uladzislau Rezki wrote:
> On Fri, Jan 13, 2023 at 11:55:07AM +0800, Baoquan He wrote:
> > Hi Uladzislau Rezki，
> > 
> > On 12/23/22 at 12:14pm, Baoquan He wrote:
> > > On 12/20/22 at 05:55pm, Uladzislau Rezki wrote:
> > ......
> >  > >  	spin_lock(&vmap_area_lock);
> > > > >  	insert_vmap_area(va, &vmap_area_root, &vmap_area_list);
> > > > > @@ -1887,6 +1889,10 @@ struct vmap_area *find_vmap_area(unsigned long addr)
> > > > >  
> > > > >  #define VMAP_BLOCK_SIZE		(VMAP_BBMAP_BITS * PAGE_SIZE)
> > > > >  
> > > > > +#define VMAP_RAM		0x1
> > > > > +#define VMAP_BLOCK		0x2
> > > > > +#define VMAP_FLAGS_MASK		0x3
> > > > > 
> > > > Maybe to rename a VMAP_BLOCK to something like VMAP_BLOCK_RESERVED or
> > > > VMAP_PER_CPU_BLOCK?
> > > 
> > > Both VMAP_BLOCK or VMAP_PER_CPU_BLOCK look good to me, please see my
> > > explanation at below.
> > > 
> > > > 
> > > > >  struct vmap_block_queue {
> > > > >  	spinlock_t lock;
> > > > >  	struct list_head free;
> > > > > @@ -1962,7 +1968,8 @@ static void *new_vmap_block(unsigned int order, gfp_t gfp_mask)
> > > > >  
> > > > >  	va = alloc_vmap_area(VMAP_BLOCK_SIZE, VMAP_BLOCK_SIZE,
> > > > >  					VMALLOC_START, VMALLOC_END,
> > > > > -					node, gfp_mask);
> > > > > +					node, gfp_mask,
> > > > > +					VMAP_RAM|VMAP_BLOCK);
> > > > >
> > > > A new_vmap_block() is for a per-cpu path. As far as i see the VMAP_BLOCK
> > > > flag is used to mark a VA that corresponds to a reserved per-cpu free area.
> > > > 
> > > > Whereas a VMAP_RAM is for VA that was obtained over per-cpu path but
> > > > over alloc_vmap_area() thus a VA should be read out over "busy" tree
> > > > directly.
> > 
> > Rethinking about the vmap->flags and the bit0->VMAP_RAM,
> > bit1->VMAP_BLOCK correspondence, it looks better to use bit0->VMAP_RAM
> > to indicate the vm_map_ram area, no matter how it's handled inside
> > vm_map_ram() interface; and use bit1->VMAP_BLOCK to mark out the special
> > vm_map_ram area which is further subdivided and managed by struct
> > vmap_block. With these, you can see that we can identify vm_map_ram area
> > and treat it as one type of vmalloc area, e.g in vread(), s_show().
> > 
> > Means when we are talking about vm_map_ram areas, we use
> > (vmap->flags & VMAP_RAM) to recognize them; when we need to
> > differentiate and handle vm_map_ram areas respectively, we use
> > (vmap->flags & VMAP_BLOCK) to pick out the area which is further managed
> > by vmap_block. Please help check if this is OK to you.
> > 
> > > > 
> > > > Why do you need to set here both VMAP_RAM and VMAP_BLOCK?
> > > 
> > > My understanding is that the vm_map_ram area has two types, one is
> > > the vb percpu area via vb_alloc(), the other is allocated via
> > > alloc_vmap_area(). While both of them is got from vm_map_ram()
> > > interface, this is the main point that distinguishes the vm_map_ram area
> > > than the normal vmalloc area, and this makes vm_map_ram area not owning
> > > va->vm pointer. So here, I use flag VMAP_RAM to mark the vm_map_ram
> > > area, including the two types; meanwhile, I add VMAP_BLOCK to mark out
> > > the vb percpu area. 
> > > 
> > > I understand people could have different view about them, e.g as you
> > > said, use VMAP_RAM to mark the type of vm_map_ram area allocated through
> > > alloc_vmap_area(), while use VMAP_PER_CPU_BLOCK to mark vb percpu area
> > > from vb_alloc. In this way, we may need to rename VMAP_RAM to reflect
> > > the area allocated from alloc_vmap_area() only. Both is fine to me.
> > > 
> > > > 
> > > > >  	if (IS_ERR(va)) {
> > > > >  		kfree(vb);
> > > > >  		return ERR_CAST(va);
> > > > > @@ -2229,8 +2236,12 @@ void vm_unmap_ram(const void *mem, unsigned int count)
> > > > >  		return;
> > > > >  	}
> > > > >  
> > > > > -	va = find_vmap_area(addr);
> > > > > +	spin_lock(&vmap_area_lock);
> > > > > +	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
> > > > >  	BUG_ON(!va);
> > > > > +	if (va)
> > > > > +		va->flags &= ~VMAP_RAM;
> > > > > +	spin_unlock(&vmap_area_lock);
> > > > >  	debug_check_no_locks_freed((void *)va->va_start,
> > > > >
> > > > Agree with Lorenzo. BUG_ON() should be out of spinlock(). Furthermore
> > > > i think it makes sense to go with WARN_ON_ONCE() and do not kill a system.
> > > > Instead emit a warning and bailout.
> > > > 
> > > > What do you think? Maybe separate patch for it?
> > > 
> > > Agree, your patch looks great to me. Thanks.
> > > 
> > > > 
> > > > >  				    (va->va_end - va->va_start));
> > > > >  	free_unmap_vmap_area(va);
> > > > > @@ -2265,7 +2276,8 @@ void *vm_map_ram(struct page **pages, unsigned int count, int node)
> > > > >  	} else {
> > > > >  		struct vmap_area *va;
> > > > >  		va = alloc_vmap_area(size, PAGE_SIZE,
> > > > > -				VMALLOC_START, VMALLOC_END, node, GFP_KERNEL);
> > > > > +				VMALLOC_START, VMALLOC_END,
> > > > > +				node, GFP_KERNEL, VMAP_RAM);
> > > > >  		if (IS_ERR(va))
> > > > >  			return NULL;
> > > > >  
> > > > > @@ -2505,7 +2517,7 @@ static struct vm_struct *__get_vm_area_node(unsigned long size,
> > > > >  	if (!(flags & VM_NO_GUARD))
> > > > >  		size += PAGE_SIZE;
> > > > >  
> > > > > -	va = alloc_vmap_area(size, align, start, end, node, gfp_mask);
> > > > > +	va = alloc_vmap_area(size, align, start, end, node, gfp_mask, 0);
> > > > >  	if (IS_ERR(va)) {
> > > > >  		kfree(area);
> > > > >  		return NULL;
> > > > >
> > > > I know we have already discussed the new parameter. But what if we just
> > > > use atomic_set operation to mark VA as either vmap-ram or vmap-block?
> > 
> > As I replied at above, I take the vm_map_ram as one kind of vmalloc
> > area, and mark out the percpu vmap block handling of vm_map_ram area.
> > Seems the passing in the flags through function parameter is better. Not
> > sure if I got your suggestion correctly, and my code change is
> > appropriate. I have sent v3 according to your and Lorenzo's comments and
> > suggestion, and my rethinking after reading your words. I make some
> > adjustment to try to remove misundersanding or confusion when reading
> > patch and code. Please help check if it's OK.
> > 
> OK, if we decided to go with a parameter it is OK, it is not a big deal
> and complexity. If needed it can be adjusted later on if there is a
> need.

My preference for function parameter passing is we don't need do the
atomic reading when we want to check va->flags. However, in va->flags
setting side, atomic_set() code is simpler than function parameter.

	flags = atomic_read(&va->flags);
        if (flags & VMAP_RAM) {
		
	}

I checked code, and feel it doesn't have much difference, so keep the
current code. If there's other thing I didn't think of, we can still
change. Thanks.

Re: [PATCH v2 2/7] mm/vmalloc.c: add flags to mark vm_map_ram area

[Uladzislau Rezki]

On Wed, Jan 18, 2023 at 11:09:44AM +0800, Baoquan He wrote:
> On 01/16/23 at 06:54pm, Uladzislau Rezki wrote:
> > On Fri, Jan 13, 2023 at 11:55:07AM +0800, Baoquan He wrote:
> > > Hi Uladzislau Rezki，
> > > 
> > > On 12/23/22 at 12:14pm, Baoquan He wrote:
> > > > On 12/20/22 at 05:55pm, Uladzislau Rezki wrote:
> > > ......
> > >  > >  	spin_lock(&vmap_area_lock);
> > > > > >  	insert_vmap_area(va, &vmap_area_root, &vmap_area_list);
> > > > > > @@ -1887,6 +1889,10 @@ struct vmap_area *find_vmap_area(unsigned long addr)
> > > > > >  
> > > > > >  #define VMAP_BLOCK_SIZE		(VMAP_BBMAP_BITS * PAGE_SIZE)
> > > > > >  
> > > > > > +#define VMAP_RAM		0x1
> > > > > > +#define VMAP_BLOCK		0x2
> > > > > > +#define VMAP_FLAGS_MASK		0x3
> > > > > > 
> > > > > Maybe to rename a VMAP_BLOCK to something like VMAP_BLOCK_RESERVED or
> > > > > VMAP_PER_CPU_BLOCK?
> > > > 
> > > > Both VMAP_BLOCK or VMAP_PER_CPU_BLOCK look good to me, please see my
> > > > explanation at below.
> > > > 
> > > > > 
> > > > > >  struct vmap_block_queue {
> > > > > >  	spinlock_t lock;
> > > > > >  	struct list_head free;
> > > > > > @@ -1962,7 +1968,8 @@ static void *new_vmap_block(unsigned int order, gfp_t gfp_mask)
> > > > > >  
> > > > > >  	va = alloc_vmap_area(VMAP_BLOCK_SIZE, VMAP_BLOCK_SIZE,
> > > > > >  					VMALLOC_START, VMALLOC_END,
> > > > > > -					node, gfp_mask);
> > > > > > +					node, gfp_mask,
> > > > > > +					VMAP_RAM|VMAP_BLOCK);
> > > > > >
> > > > > A new_vmap_block() is for a per-cpu path. As far as i see the VMAP_BLOCK
> > > > > flag is used to mark a VA that corresponds to a reserved per-cpu free area.
> > > > > 
> > > > > Whereas a VMAP_RAM is for VA that was obtained over per-cpu path but
> > > > > over alloc_vmap_area() thus a VA should be read out over "busy" tree
> > > > > directly.
> > > 
> > > Rethinking about the vmap->flags and the bit0->VMAP_RAM,
> > > bit1->VMAP_BLOCK correspondence, it looks better to use bit0->VMAP_RAM
> > > to indicate the vm_map_ram area, no matter how it's handled inside
> > > vm_map_ram() interface; and use bit1->VMAP_BLOCK to mark out the special
> > > vm_map_ram area which is further subdivided and managed by struct
> > > vmap_block. With these, you can see that we can identify vm_map_ram area
> > > and treat it as one type of vmalloc area, e.g in vread(), s_show().
> > > 
> > > Means when we are talking about vm_map_ram areas, we use
> > > (vmap->flags & VMAP_RAM) to recognize them; when we need to
> > > differentiate and handle vm_map_ram areas respectively, we use
> > > (vmap->flags & VMAP_BLOCK) to pick out the area which is further managed
> > > by vmap_block. Please help check if this is OK to you.
> > > 
> > > > > 
> > > > > Why do you need to set here both VMAP_RAM and VMAP_BLOCK?
> > > > 
> > > > My understanding is that the vm_map_ram area has two types, one is
> > > > the vb percpu area via vb_alloc(), the other is allocated via
> > > > alloc_vmap_area(). While both of them is got from vm_map_ram()
> > > > interface, this is the main point that distinguishes the vm_map_ram area
> > > > than the normal vmalloc area, and this makes vm_map_ram area not owning
> > > > va->vm pointer. So here, I use flag VMAP_RAM to mark the vm_map_ram
> > > > area, including the two types; meanwhile, I add VMAP_BLOCK to mark out
> > > > the vb percpu area. 
> > > > 
> > > > I understand people could have different view about them, e.g as you
> > > > said, use VMAP_RAM to mark the type of vm_map_ram area allocated through
> > > > alloc_vmap_area(), while use VMAP_PER_CPU_BLOCK to mark vb percpu area
> > > > from vb_alloc. In this way, we may need to rename VMAP_RAM to reflect
> > > > the area allocated from alloc_vmap_area() only. Both is fine to me.
> > > > 
> > > > > 
> > > > > >  	if (IS_ERR(va)) {
> > > > > >  		kfree(vb);
> > > > > >  		return ERR_CAST(va);
> > > > > > @@ -2229,8 +2236,12 @@ void vm_unmap_ram(const void *mem, unsigned int count)
> > > > > >  		return;
> > > > > >  	}
> > > > > >  
> > > > > > -	va = find_vmap_area(addr);
> > > > > > +	spin_lock(&vmap_area_lock);
> > > > > > +	va = __find_vmap_area((unsigned long)addr, &vmap_area_root);
> > > > > >  	BUG_ON(!va);
> > > > > > +	if (va)
> > > > > > +		va->flags &= ~VMAP_RAM;
> > > > > > +	spin_unlock(&vmap_area_lock);
> > > > > >  	debug_check_no_locks_freed((void *)va->va_start,
> > > > > >
> > > > > Agree with Lorenzo. BUG_ON() should be out of spinlock(). Furthermore
> > > > > i think it makes sense to go with WARN_ON_ONCE() and do not kill a system.
> > > > > Instead emit a warning and bailout.
> > > > > 
> > > > > What do you think? Maybe separate patch for it?
> > > > 
> > > > Agree, your patch looks great to me. Thanks.
> > > > 
> > > > > 
> > > > > >  				    (va->va_end - va->va_start));
> > > > > >  	free_unmap_vmap_area(va);
> > > > > > @@ -2265,7 +2276,8 @@ void *vm_map_ram(struct page **pages, unsigned int count, int node)
> > > > > >  	} else {
> > > > > >  		struct vmap_area *va;
> > > > > >  		va = alloc_vmap_area(size, PAGE_SIZE,
> > > > > > -				VMALLOC_START, VMALLOC_END, node, GFP_KERNEL);
> > > > > > +				VMALLOC_START, VMALLOC_END,
> > > > > > +				node, GFP_KERNEL, VMAP_RAM);
> > > > > >  		if (IS_ERR(va))
> > > > > >  			return NULL;
> > > > > >  
> > > > > > @@ -2505,7 +2517,7 @@ static struct vm_struct *__get_vm_area_node(unsigned long size,
> > > > > >  	if (!(flags & VM_NO_GUARD))
> > > > > >  		size += PAGE_SIZE;
> > > > > >  
> > > > > > -	va = alloc_vmap_area(size, align, start, end, node, gfp_mask);
> > > > > > +	va = alloc_vmap_area(size, align, start, end, node, gfp_mask, 0);
> > > > > >  	if (IS_ERR(va)) {
> > > > > >  		kfree(area);
> > > > > >  		return NULL;
> > > > > >
> > > > > I know we have already discussed the new parameter. But what if we just
> > > > > use atomic_set operation to mark VA as either vmap-ram or vmap-block?
> > > 
> > > As I replied at above, I take the vm_map_ram as one kind of vmalloc
> > > area, and mark out the percpu vmap block handling of vm_map_ram area.
> > > Seems the passing in the flags through function parameter is better. Not
> > > sure if I got your suggestion correctly, and my code change is
> > > appropriate. I have sent v3 according to your and Lorenzo's comments and
> > > suggestion, and my rethinking after reading your words. I make some
> > > adjustment to try to remove misundersanding or confusion when reading
> > > patch and code. Please help check if it's OK.
> > > 
> > OK, if we decided to go with a parameter it is OK, it is not a big deal
> > and complexity. If needed it can be adjusted later on if there is a
> > need.
> 
> My preference for function parameter passing is we don't need do the
> atomic reading when we want to check va->flags. However, in va->flags
> setting side, atomic_set() code is simpler than function parameter.
> 
> 	flags = atomic_read(&va->flags);
>         if (flags & VMAP_RAM) {
> 		
> 	}
> 
> I checked code, and feel it doesn't have much difference, so keep the
> current code. If there's other thing I didn't think of, we can still
> change. Thanks.
> 
That is fine.

--
Uladzislau Rezki