[PATCH 4.19 00/18] 4.19.186-rc1 review

[PATCH 4.19 00/18] 4.19.186-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.186 release.
There are 18 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 11 Apr 2021 09:52:52 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.186-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.186-rc1

Masahiro Yamada <masahiroy@kernel.org>
    init/Kconfig: make COMPILE_TEST depend on HAS_IOMEM

Heiko Carstens <hca@linux.ibm.com>
    init/Kconfig: make COMPILE_TEST depend on !S390

Piotr Krysiuk <piotras@gmail.com>
    bpf, x86: Validate computation of branch displacements for x86-32

Piotr Krysiuk <piotras@gmail.com>
    bpf, x86: Validate computation of branch displacements for x86-64

Vincent Whitchurch <vincent.whitchurch@axis.com>
    cifs: Silently ignore unknown oplock break handle

Ronnie Sahlberg <lsahlber@redhat.com>
    cifs: revalidate mapping when we open files for SMB1 POSIX

Sergei Trofimovich <slyfox@gentoo.org>
    ia64: fix format strings for err_inject

Sergei Trofimovich <slyfox@gentoo.org>
    ia64: mca: allocate early mca with GFP_ATOMIC

Martin Wilck <mwilck@suse.com>
    scsi: target: pscsi: Clean up after failure in pscsi_map_sg()

Arnd Bergmann <arnd@arndb.de>
    x86/build: Turn off -fcf-protection for realmode targets

Esteve Varela Colominas <esteve.varela@gmail.com>
    platform/x86: thinkpad_acpi: Allow the FnLock LED to change state

Rob Clark <robdclark@chromium.org>
    drm/msm: Ratelimit invalid-fence message

Karthikeyan Kathirvel <kathirve@codeaurora.org>
    mac80211: choose first enabled channel for monitor

Tong Zhang <ztong0001@gmail.com>
    mISDN: fix crash in fritzpci

Pavel Andrianov <andrianov@ispras.ru>
    net: pxa168_eth: Fix a potential data race in pxa168_eth_remove

Alban Bedel <albeu@free.fr>
    platform/x86: intel-hid: Support Lenovo ThinkPad X1 Tablet Gen 2

Tony Lindgren <tony@atomide.com>
    bus: ti-sysc: Fix warning on unbind if reset is not deasserted

Mans Rullgard <mans@mansr.com>
    ARM: dts: am33xx: add aliases for mmc interfaces


-------------

Diffstat:

 Makefile                                  |  4 ++--
 arch/arm/boot/dts/am33xx.dtsi             |  3 +++
 arch/ia64/kernel/err_inject.c             | 22 +++++++++++-----------
 arch/ia64/kernel/mca.c                    |  2 +-
 arch/x86/Makefile                         |  2 +-
 arch/x86/net/bpf_jit_comp.c               | 11 ++++++++++-
 arch/x86/net/bpf_jit_comp32.c             | 11 ++++++++++-
 drivers/bus/ti-sysc.c                     |  4 +++-
 drivers/gpu/drm/msm/msm_fence.c           |  2 +-
 drivers/isdn/hardware/mISDN/mISDNipac.c   |  2 +-
 drivers/net/ethernet/marvell/pxa168_eth.c |  2 +-
 drivers/platform/x86/intel-hid.c          |  7 +++++++
 drivers/platform/x86/thinkpad_acpi.c      |  8 +++++++-
 drivers/target/target_core_pscsi.c        |  8 ++++++++
 fs/cifs/file.c                            |  1 +
 fs/cifs/smb2misc.c                        |  4 ++--
 init/Kconfig                              |  3 +--
 net/mac80211/main.c                       | 13 ++++++++++++-
 18 files changed, 82 insertions(+), 27 deletions(-)

[PATCH 4.19 01/18] ARM: dts: am33xx: add aliases for mmc interfaces

[Greg Kroah-Hartman]

From: Mans Rullgard <mans@mansr.com>

[ Upstream commit 9bbce32a20d6a72c767a7f85fd6127babd1410ac ]

Without DT aliases, the numbering of mmc interfaces is unpredictable.
Adding them makes it possible to refer to devices consistently.  The
popular suggestion to use UUIDs obviously doesn't work with a blank
device fresh from the factory.

See commit fa2d0aa96941 ("mmc: core: Allow setting slot index via
device tree alias") for more discussion.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am33xx.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index d3dd6a16e70a..e321acaf35d6 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -39,6 +39,9 @@ aliases {
 		ethernet1 = &cpsw_emac1;
 		spi0 = &spi0;
 		spi1 = &spi1;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 	};
 
 	cpus {
-- 
2.30.2

[PATCH 4.19 02/18] bus: ti-sysc: Fix warning on unbind if reset is not deasserted

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit a7b5d7c4969aba8d1f04c29048906abaa71fb6a9 ]

We currently get thefollowing on driver unbind if a reset is configured
and asserted:

WARNING: CPU: 0 PID: 993 at drivers/reset/core.c:432 reset_control_assert
...
(reset_control_assert) from [<c0fecda8>] (sysc_remove+0x190/0x1e4)
(sysc_remove) from [<c0a2bb58>] (platform_remove+0x24/0x3c)
(platform_remove) from [<c0a292fc>] (__device_release_driver+0x154/0x214)
(__device_release_driver) from [<c0a2a210>] (device_driver_detach+0x3c/0x8c)
(device_driver_detach) from [<c0a27d64>] (unbind_store+0x60/0xd4)
(unbind_store) from [<c0546bec>] (kernfs_fop_write_iter+0x10c/0x1cc)

Let's fix it by checking the reset status.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/ti-sysc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 54c8c8644df2..b6a278183d82 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1814,7 +1814,9 @@ static int sysc_remove(struct platform_device *pdev)
 
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-	reset_control_assert(ddata->rsts);
+
+	if (!reset_control_status(ddata->rsts))
+		reset_control_assert(ddata->rsts);
 
 unprepare:
 	sysc_unprepare(ddata);
-- 
2.30.2

[PATCH 4.19 03/18] platform/x86: intel-hid: Support Lenovo ThinkPad X1 Tablet Gen 2

[Greg Kroah-Hartman]

From: Alban Bedel <albeu@free.fr>

[ Upstream commit 56678a5f44ef5f0ad9a67194bbee2280c6286534 ]

Like a few other system the Lenovo ThinkPad X1 Tablet Gen 2 miss the
HEBC method, which prevent the power button from working. Add a quirk
to enable the button array on this system family and fix the power
button.

Signed-off-by: Alban Bedel <albeu@free.fr>
Tested-by: Alexander Kobel <a-kobel@a-kobel.de>
Link: https://lore.kernel.org/r/20210222141559.3775-1-albeu@free.fr
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-hid.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c
index d7d69eadb9bb..fa3cda69cec9 100644
--- a/drivers/platform/x86/intel-hid.c
+++ b/drivers/platform/x86/intel-hid.c
@@ -94,6 +94,13 @@ static const struct dmi_system_id button_array_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x2 Detachable"),
 		},
 	},
+	{
+		.ident = "Lenovo ThinkPad X1 Tablet Gen 2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_FAMILY, "ThinkPad X1 Tablet Gen 2"),
+		},
+	},
 	{ }
 };
 
-- 
2.30.2

[PATCH 4.19 04/18] net: pxa168_eth: Fix a potential data race in pxa168_eth_remove

[Greg Kroah-Hartman]

From: Pavel Andrianov <andrianov@ispras.ru>

[ Upstream commit 0571a753cb07982cc82f4a5115e0b321da89e1f3 ]

pxa168_eth_remove() firstly calls unregister_netdev(),
then cancels a timeout work. unregister_netdev() shuts down a device
interface and removes it from the kernel tables. If the timeout occurs
in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop
and open of the device. It may lead to an inconsistent state and memory
leaks.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Pavel Andrianov <andrianov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/pxa168_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index ff2fea0f8b75..0d6a4e47e7a5 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -1564,8 +1564,8 @@ static int pxa168_eth_remove(struct platform_device *pdev)
 
 	mdiobus_unregister(pep->smi_bus);
 	mdiobus_free(pep->smi_bus);
-	unregister_netdev(dev);
 	cancel_work_sync(&pep->tx_timeout_task);
+	unregister_netdev(dev);
 	free_netdev(dev);
 	return 0;
 }
-- 
2.30.2

[PATCH 4.19 05/18] mISDN: fix crash in fritzpci

[Greg Kroah-Hartman]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit a9f81244d2e33e6dfcef120fefd30c96b3f7cdb0 ]

setup_fritz() in avmfritz.c might fail with -EIO and in this case the
isac.type and isac.write_reg is not initialized and remains 0(NULL).
A subsequent call to isac_release() will dereference isac->write_reg and
crash.

[    1.737444] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    1.737809] #PF: supervisor instruction fetch in kernel mode
[    1.738106] #PF: error_code(0x0010) - not-present page
[    1.738378] PGD 0 P4D 0
[    1.738515] Oops: 0010 [#1] SMP NOPTI
[    1.738711] CPU: 0 PID: 180 Comm: systemd-udevd Not tainted 5.12.0-rc2+ #78
[    1.739077] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-p
rebuilt.qemu.org 04/01/2014
[    1.739664] RIP: 0010:0x0
[    1.739807] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[    1.740200] RSP: 0018:ffffc9000027ba10 EFLAGS: 00010202
[    1.740478] RAX: 0000000000000000 RBX: ffff888102f41840 RCX: 0000000000000027
[    1.740853] RDX: 00000000000000ff RSI: 0000000000000020 RDI: ffff888102f41800
[    1.741226] RBP: ffffc9000027ba20 R08: ffff88817bc18440 R09: ffffc9000027b808
[    1.741600] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888102f41840
[    1.741976] R13: 00000000fffffffb R14: ffff888102f41800 R15: ffff8881008b0000
[    1.742351] FS:  00007fda3a38a8c0(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000
[    1.742774] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.743076] CR2: ffffffffffffffd6 CR3: 00000001021ec000 CR4: 00000000000006f0
[    1.743452] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    1.743828] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    1.744206] Call Trace:
[    1.744339]  isac_release+0xcc/0xe0 [mISDNipac]
[    1.744582]  fritzpci_probe.cold+0x282/0x739 [avmfritz]
[    1.744861]  local_pci_probe+0x48/0x80
[    1.745063]  pci_device_probe+0x10f/0x1c0
[    1.745278]  really_probe+0xfb/0x420
[    1.745471]  driver_probe_device+0xe9/0x160
[    1.745693]  device_driver_attach+0x5d/0x70
[    1.745917]  __driver_attach+0x8f/0x150
[    1.746123]  ? device_driver_attach+0x70/0x70
[    1.746354]  bus_for_each_dev+0x7e/0xc0
[    1.746560]  driver_attach+0x1e/0x20
[    1.746751]  bus_add_driver+0x152/0x1f0
[    1.746957]  driver_register+0x74/0xd0
[    1.747157]  ? 0xffffffffc00d8000
[    1.747334]  __pci_register_driver+0x54/0x60
[    1.747562]  AVM_init+0x36/0x1000 [avmfritz]
[    1.747791]  do_one_initcall+0x48/0x1d0
[    1.747997]  ? __cond_resched+0x19/0x30
[    1.748206]  ? kmem_cache_alloc_trace+0x390/0x440
[    1.748458]  ? do_init_module+0x28/0x250
[    1.748669]  do_init_module+0x62/0x250
[    1.748870]  load_module+0x23ee/0x26a0
[    1.749073]  __do_sys_finit_module+0xc2/0x120
[    1.749307]  ? __do_sys_finit_module+0xc2/0x120
[    1.749549]  __x64_sys_finit_module+0x1a/0x20
[    1.749782]  do_syscall_64+0x38/0x90

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hardware/mISDN/mISDNipac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c
index 4d78f870435e..71e635d6c64a 100644
--- a/drivers/isdn/hardware/mISDN/mISDNipac.c
+++ b/drivers/isdn/hardware/mISDN/mISDNipac.c
@@ -710,7 +710,7 @@ isac_release(struct isac_hw *isac)
 {
 	if (isac->type & IPAC_TYPE_ISACX)
 		WriteISAC(isac, ISACX_MASK, 0xff);
-	else
+	else if (isac->type != 0)
 		WriteISAC(isac, ISAC_MASK, 0xff);
 	if (isac->dch.timer.function != NULL) {
 		del_timer(&isac->dch.timer);
-- 
2.30.2

[PATCH 4.19 06/18] mac80211: choose first enabled channel for monitor

[Greg Kroah-Hartman]

From: Karthikeyan Kathirvel <kathirve@codeaurora.org>

[ Upstream commit 041c881a0ba8a75f71118bd9766b78f04beed469 ]

Even if the first channel from sband channel list is invalid
or disabled mac80211 ends up choosing it as the default channel
for monitor interfaces, making them not usable.

Fix this by assigning the first available valid or enabled
channel instead.

Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org>
Link: https://lore.kernel.org/r/1615440547-7661-1-git-send-email-kathirve@codeaurora.org
[reword commit message, comment, code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/main.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 68db2a356443..f44d00f35fe7 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -931,8 +931,19 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 			continue;
 
 		if (!dflt_chandef.chan) {
+			/*
+			 * Assign the first enabled channel to dflt_chandef
+			 * from the list of channels
+			 */
+			for (i = 0; i < sband->n_channels; i++)
+				if (!(sband->channels[i].flags &
+						IEEE80211_CHAN_DISABLED))
+					break;
+			/* if none found then use the first anyway */
+			if (i == sband->n_channels)
+				i = 0;
 			cfg80211_chandef_create(&dflt_chandef,
-						&sband->channels[0],
+						&sband->channels[i],
 						NL80211_CHAN_NO_HT);
 			/* init channel we're on */
 			if (!local->use_chanctx && !local->_oper_chandef.chan) {
-- 
2.30.2

[PATCH 4.19 07/18] drm/msm: Ratelimit invalid-fence message

[Greg Kroah-Hartman]

From: Rob Clark <robdclark@chromium.org>

[ Upstream commit 7ad48d27a2846bfda29214fb454d001c3e02b9e7 ]

We have seen a couple cases where low memory situations cause something
bad to happen, followed by a flood of these messages obscuring the root
cause.  Lets ratelimit the dmesg spam so that next time it happens we
don't lose the kernel traces leading up to this.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_fence.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/msm_fence.c b/drivers/gpu/drm/msm/msm_fence.c
index 349c12f670eb..6c11be79574e 100644
--- a/drivers/gpu/drm/msm/msm_fence.c
+++ b/drivers/gpu/drm/msm/msm_fence.c
@@ -56,7 +56,7 @@ int msm_wait_fence(struct msm_fence_context *fctx, uint32_t fence,
 	int ret;
 
 	if (fence > fctx->last_fence) {
-		DRM_ERROR("%s: waiting on invalid fence: %u (of %u)\n",
+		DRM_ERROR_RATELIMITED("%s: waiting on invalid fence: %u (of %u)\n",
 				fctx->name, fence, fctx->last_fence);
 		return -EINVAL;
 	}
-- 
2.30.2

[PATCH 4.19 08/18] platform/x86: thinkpad_acpi: Allow the FnLock LED to change state

[Greg Kroah-Hartman]

From: Esteve Varela Colominas <esteve.varela@gmail.com>

[ Upstream commit 3d677f12ea3a2097a16ded570623567403dea959 ]

On many recent ThinkPad laptops, there's a new LED next to the ESC key,
that indicates the FnLock status.
When the Fn+ESC combo is pressed, FnLock is toggled, which causes the
Media Key functionality to change, making it so that the media keys
either perform their media key function, or function as an F-key by
default. The Fn key can be used the access the alternate function at any
time.

With the current linux kernel, the LED doens't change state if you press
the Fn+ESC key combo. However, the media key functionality *does*
change. This is annoying, since the LED will stay on if it was on during
bootup, and it makes it hard to keep track what the current state of the
FnLock is.

This patch calls an ACPI function, that gets the current media key
state, when the Fn+ESC key combo is pressed. Through testing it was
discovered that this function causes the LED to update correctly to
reflect the current state when this function is called.

The relevant ACPI calls are the following:
\_SB_.PCI0.LPC0.EC0_.HKEY.GMKS: Get media key state, returns 0x603 if the FnLock mode is enabled, and 0x602 if it's disabled.
\_SB_.PCI0.LPC0.EC0_.HKEY.SMKS: Set media key state, sending a 1 will enable FnLock mode, and a 0 will disable it.

Relevant discussion:
https://bugzilla.kernel.org/show_bug.cgi?id=207841
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1881015

Signed-off-by: Esteve Varela Colominas <esteve.varela@gmail.com>
Link: https://lore.kernel.org/r/20210315195823.23212-1-esteve.varela@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/thinkpad_acpi.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index a6e69f2495d2..559698640fe2 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -4102,13 +4102,19 @@ static bool hotkey_notify_6xxx(const u32 hkey,
 
 	case TP_HKEY_EV_KEY_NUMLOCK:
 	case TP_HKEY_EV_KEY_FN:
-	case TP_HKEY_EV_KEY_FN_ESC:
 		/* key press events, we just ignore them as long as the EC
 		 * is still reporting them in the normal keyboard stream */
 		*send_acpi_ev = false;
 		*ignore_acpi_ev = true;
 		return true;
 
+	case TP_HKEY_EV_KEY_FN_ESC:
+		/* Get the media key status to foce the status LED to update */
+		acpi_evalf(hkey_handle, NULL, "GMKS", "v");
+		*send_acpi_ev = false;
+		*ignore_acpi_ev = true;
+		return true;
+
 	case TP_HKEY_EV_TABLET_CHANGED:
 		tpacpi_input_send_tabletsw();
 		hotkey_tablet_mode_notify_change();
-- 
2.30.2

[PATCH 4.19 09/18] x86/build: Turn off -fcf-protection for realmode targets

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 9fcb51c14da2953de585c5c6e50697b8a6e91a7b ]

The new Ubuntu GCC packages turn on -fcf-protection globally,
which causes a build failure in the x86 realmode code:

  cc1: error: ‘-fcf-protection’ is not compatible with this target

Turn it off explicitly on compilers that understand this option.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210323124846.1584944-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 75200b421f29..6ebdbad21fb2 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -34,7 +34,7 @@ M16_CFLAGS	 := $(call cc-option, -m16, $(CODE16GCC_CFLAGS))
 REALMODE_CFLAGS	:= $(M16_CFLAGS) -g -Os -DDISABLE_BRANCH_PROFILING \
 		   -Wall -Wstrict-prototypes -march=i386 -mregparm=3 \
 		   -fno-strict-aliasing -fomit-frame-pointer -fno-pic \
-		   -mno-mmx -mno-sse
+		   -mno-mmx -mno-sse $(call cc-option,-fcf-protection=none)
 
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -ffreestanding)
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -fno-stack-protector)
-- 
2.30.2

[PATCH 4.19 10/18] scsi: target: pscsi: Clean up after failure in pscsi_map_sg()

[Greg Kroah-Hartman]

From: Martin Wilck <mwilck@suse.com>

[ Upstream commit 36fa766faa0c822c860e636fe82b1affcd022974 ]

If pscsi_map_sg() fails, make sure to drop references to already allocated
bios.

Link: https://lore.kernel.org/r/20210323212431.15306-2-mwilck@suse.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_pscsi.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index 47d76c862014..02c4e3beb264 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -970,6 +970,14 @@ pscsi_map_sg(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
 
 	return 0;
 fail:
+	if (bio)
+		bio_put(bio);
+	while (req->bio) {
+		bio = req->bio;
+		req->bio = bio->bi_next;
+		bio_put(bio);
+	}
+	req->biotail = NULL;
 	return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 }
 
-- 
2.30.2

[PATCH 4.19 11/18] ia64: mca: allocate early mca with GFP_ATOMIC

[Greg Kroah-Hartman]

From: Sergei Trofimovich <slyfox@gentoo.org>

[ Upstream commit f2a419cf495f95cac49ea289318b833477e1a0e2 ]

The sleep warning happens at early boot right at secondary CPU
activation bootup:

    smp: Bringing up secondary CPUs ...
    BUG: sleeping function called from invalid context at mm/page_alloc.c:4942
    in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
    CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.12.0-rc2-00007-g79e228d0b611-dirty #99
    ..
    Call Trace:
      show_stack+0x90/0xc0
      dump_stack+0x150/0x1c0
      ___might_sleep+0x1c0/0x2a0
      __might_sleep+0xa0/0x160
      __alloc_pages_nodemask+0x1a0/0x600
      alloc_page_interleave+0x30/0x1c0
      alloc_pages_current+0x2c0/0x340
      __get_free_pages+0x30/0xa0
      ia64_mca_cpu_init+0x2d0/0x3a0
      cpu_init+0x8b0/0x1440
      start_secondary+0x60/0x700
      start_ap+0x750/0x780
    Fixed BSP b0 value from CPU 1

As I understand interrupts are not enabled yet and system has a lot of
memory.  There is little chance to sleep and switch to GFP_ATOMIC should
be a no-op.

Link: https://lkml.kernel.org/r/20210315085045.204414-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/kernel/mca.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 6115464d5f03..d7400b2844f1 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1860,7 +1860,7 @@ ia64_mca_cpu_init(void *cpu_data)
 			data = mca_bootmem();
 			first_time = 0;
 		} else
-			data = (void *)__get_free_pages(GFP_KERNEL,
+			data = (void *)__get_free_pages(GFP_ATOMIC,
 							get_order(sz));
 		if (!data)
 			panic("Could not allocate MCA memory for cpu %d\n",
-- 
2.30.2

[PATCH 4.19 12/18] ia64: fix format strings for err_inject

[Greg Kroah-Hartman]

From: Sergei Trofimovich <slyfox@gentoo.org>

[ Upstream commit 95d44a470a6814207d52dd6312203b0f4ef12710 ]

Fix warning with %lx / u64 mismatch:

  arch/ia64/kernel/err_inject.c: In function 'show_resources':
  arch/ia64/kernel/err_inject.c:62:22: warning:
    format '%lx' expects argument of type 'long unsigned int',
    but argument 3 has type 'u64' {aka 'long long unsigned int'}
     62 |  return sprintf(buf, "%lx", name[cpu]);   \
        |                      ^~~~~~~

Link: https://lkml.kernel.org/r/20210313104312.1548232-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/kernel/err_inject.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/ia64/kernel/err_inject.c b/arch/ia64/kernel/err_inject.c
index 8b5b8e6bc9d9..dd5bfed52031 100644
--- a/arch/ia64/kernel/err_inject.c
+++ b/arch/ia64/kernel/err_inject.c
@@ -59,7 +59,7 @@ show_##name(struct device *dev, struct device_attribute *attr,	\
 		char *buf)						\
 {									\
 	u32 cpu=dev->id;						\
-	return sprintf(buf, "%lx\n", name[cpu]);			\
+	return sprintf(buf, "%llx\n", name[cpu]);			\
 }
 
 #define store(name)							\
@@ -86,9 +86,9 @@ store_call_start(struct device *dev, struct device_attribute *attr,
 
 #ifdef ERR_INJ_DEBUG
 	printk(KERN_DEBUG "pal_mc_err_inject for cpu%d:\n", cpu);
-	printk(KERN_DEBUG "err_type_info=%lx,\n", err_type_info[cpu]);
-	printk(KERN_DEBUG "err_struct_info=%lx,\n", err_struct_info[cpu]);
-	printk(KERN_DEBUG "err_data_buffer=%lx, %lx, %lx.\n",
+	printk(KERN_DEBUG "err_type_info=%llx,\n", err_type_info[cpu]);
+	printk(KERN_DEBUG "err_struct_info=%llx,\n", err_struct_info[cpu]);
+	printk(KERN_DEBUG "err_data_buffer=%llx, %llx, %llx.\n",
 			  err_data_buffer[cpu].data1,
 			  err_data_buffer[cpu].data2,
 			  err_data_buffer[cpu].data3);
@@ -117,8 +117,8 @@ store_call_start(struct device *dev, struct device_attribute *attr,
 
 #ifdef ERR_INJ_DEBUG
 	printk(KERN_DEBUG "Returns: status=%d,\n", (int)status[cpu]);
-	printk(KERN_DEBUG "capabilities=%lx,\n", capabilities[cpu]);
-	printk(KERN_DEBUG "resources=%lx\n", resources[cpu]);
+	printk(KERN_DEBUG "capabilities=%llx,\n", capabilities[cpu]);
+	printk(KERN_DEBUG "resources=%llx\n", resources[cpu]);
 #endif
 	return size;
 }
@@ -131,7 +131,7 @@ show_virtual_to_phys(struct device *dev, struct device_attribute *attr,
 			char *buf)
 {
 	unsigned int cpu=dev->id;
-	return sprintf(buf, "%lx\n", phys_addr[cpu]);
+	return sprintf(buf, "%llx\n", phys_addr[cpu]);
 }
 
 static ssize_t
@@ -145,7 +145,7 @@ store_virtual_to_phys(struct device *dev, struct device_attribute *attr,
 	ret = get_user_pages_fast(virt_addr, 1, FOLL_WRITE, NULL);
 	if (ret<=0) {
 #ifdef ERR_INJ_DEBUG
-		printk("Virtual address %lx is not existing.\n",virt_addr);
+		printk("Virtual address %llx is not existing.\n", virt_addr);
 #endif
 		return -EINVAL;
 	}
@@ -163,7 +163,7 @@ show_err_data_buffer(struct device *dev,
 {
 	unsigned int cpu=dev->id;
 
-	return sprintf(buf, "%lx, %lx, %lx\n",
+	return sprintf(buf, "%llx, %llx, %llx\n",
 			err_data_buffer[cpu].data1,
 			err_data_buffer[cpu].data2,
 			err_data_buffer[cpu].data3);
@@ -178,13 +178,13 @@ store_err_data_buffer(struct device *dev,
 	int ret;
 
 #ifdef ERR_INJ_DEBUG
-	printk("write err_data_buffer=[%lx,%lx,%lx] on cpu%d\n",
+	printk("write err_data_buffer=[%llx,%llx,%llx] on cpu%d\n",
 		 err_data_buffer[cpu].data1,
 		 err_data_buffer[cpu].data2,
 		 err_data_buffer[cpu].data3,
 		 cpu);
 #endif
-	ret=sscanf(buf, "%lx, %lx, %lx",
+	ret = sscanf(buf, "%llx, %llx, %llx",
 			&err_data_buffer[cpu].data1,
 			&err_data_buffer[cpu].data2,
 			&err_data_buffer[cpu].data3);
-- 
2.30.2

[PATCH 4.19 13/18] cifs: revalidate mapping when we open files for SMB1 POSIX

[Greg Kroah-Hartman]

From: Ronnie Sahlberg <lsahlber@redhat.com>

[ Upstream commit cee8f4f6fcabfdf229542926128e9874d19016d5 ]

RHBZ: 1933527

Under SMB1 + POSIX, if an inode is reused on a server after we have read and
cached a part of a file, when we then open the new file with the
re-cycled inode there is a chance that we may serve the old data out of cache
to the application.
This only happens for SMB1 (deprecated) and when posix are used.
The simplest solution to avoid this race is to force a revalidate
on smb1-posix open.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/file.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 5cb15649adb0..7b482489bd22 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -163,6 +163,7 @@ int cifs_posix_open(char *full_path, struct inode **pinode,
 			goto posix_open_ret;
 		}
 	} else {
+		cifs_revalidate_mapping(*pinode);
 		cifs_fattr_to_inode(*pinode, &fattr);
 	}
 
-- 
2.30.2

[PATCH 4.19 14/18] cifs: Silently ignore unknown oplock break handle

[Greg Kroah-Hartman]

From: Vincent Whitchurch <vincent.whitchurch@axis.com>

[ Upstream commit 219481a8f90ec3a5eed9638fb35609e4b1aeece7 ]

Make SMB2 not print out an error when an oplock break is received for an
unknown handle, similar to SMB1.  The debug message which is printed for
these unknown handles may also be misleading, so fix that too.

The SMB2 lease break path is not affected by this patch.

Without this, a program which writes to a file from one thread, and
opens, reads, and writes the same file from another thread triggers the
below errors several times a minute when run against a Samba server
configured with "smb2 leases = no".

 CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2
 00000000: 424d53fe 00000040 00000000 00000012  .SMB@...........
 00000010: 00000001 00000000 ffffffff ffffffff  ................
 00000020: 00000000 00000000 00000000 00000000  ................
 00000030: 00000000 00000000 00000000 00000000  ................

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/smb2misc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c
index 7d875a47d022..7177720e822e 100644
--- a/fs/cifs/smb2misc.c
+++ b/fs/cifs/smb2misc.c
@@ -738,8 +738,8 @@ smb2_is_valid_oplock_break(char *buffer, struct TCP_Server_Info *server)
 		}
 	}
 	spin_unlock(&cifs_tcp_ses_lock);
-	cifs_dbg(FYI, "Can not process oplock break for non-existent connection\n");
-	return false;
+	cifs_dbg(FYI, "No file id matched, oplock break ignored\n");
+	return true;
 }
 
 void
-- 
2.30.2

[PATCH 4.19 15/18] bpf, x86: Validate computation of branch displacements for x86-64

[Greg Kroah-Hartman]

From: Piotr Krysiuk <piotras@gmail.com>

commit e4d4d456436bfb2fe412ee2cd489f7658449b098 upstream.

The branch displacement logic in the BPF JIT compilers for x86 assumes
that, for any generated branch instruction, the distance cannot
increase between optimization passes.

But this assumption can be violated due to how the distances are
computed. Specifically, whenever a backward branch is processed in
do_jit(), the distance is computed by subtracting the positions in the
machine code from different optimization passes. This is because part
of addrs[] is already updated for the current optimization pass, before
the branch instruction is visited.

And so the optimizer can expand blocks of machine code in some cases.

This can confuse the optimizer logic, where it assumes that a fixed
point has been reached for all machine code blocks once the total
program size stops changing. And then the JIT compiler can output
abnormal machine code containing incorrect branch displacements.

To mitigate this issue, we assert that a fixed point is reached while
populating the output image. This rejects any problematic programs.
The issue affects both x86-32 and x86-64. We mitigate separately to
ease backporting.

Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/net/bpf_jit_comp.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -1019,7 +1019,16 @@ emit_jmp:
 		}
 
 		if (image) {
-			if (unlikely(proglen + ilen > oldproglen)) {
+			/*
+			 * When populating the image, assert that:
+			 *
+			 *  i) We do not write beyond the allocated space, and
+			 * ii) addrs[i] did not change from the prior run, in order
+			 *     to validate assumptions made for computing branch
+			 *     displacements.
+			 */
+			if (unlikely(proglen + ilen > oldproglen ||
+				     proglen + ilen != addrs[i])) {
 				pr_err("bpf_jit: fatal error\n");
 				return -EFAULT;
 			}

[PATCH 4.19 16/18] bpf, x86: Validate computation of branch displacements for x86-32

[Greg Kroah-Hartman]

From: Piotr Krysiuk <piotras@gmail.com>

commit 26f55a59dc65ff77cd1c4b37991e26497fc68049 upstream.

The branch displacement logic in the BPF JIT compilers for x86 assumes
that, for any generated branch instruction, the distance cannot
increase between optimization passes.

But this assumption can be violated due to how the distances are
computed. Specifically, whenever a backward branch is processed in
do_jit(), the distance is computed by subtracting the positions in the
machine code from different optimization passes. This is because part
of addrs[] is already updated for the current optimization pass, before
the branch instruction is visited.

And so the optimizer can expand blocks of machine code in some cases.

This can confuse the optimizer logic, where it assumes that a fixed
point has been reached for all machine code blocks once the total
program size stops changing. And then the JIT compiler can output
abnormal machine code containing incorrect branch displacements.

To mitigate this issue, we assert that a fixed point is reached while
populating the output image. This rejects any problematic programs.
The issue affects both x86-32 and x86-64. We mitigate separately to
ease backporting.

Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/net/bpf_jit_comp32.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/arch/x86/net/bpf_jit_comp32.c
+++ b/arch/x86/net/bpf_jit_comp32.c
@@ -2201,7 +2201,16 @@ notyet:
 		}
 
 		if (image) {
-			if (unlikely(proglen + ilen > oldproglen)) {
+			/*
+			 * When populating the image, assert that:
+			 *
+			 *  i) We do not write beyond the allocated space, and
+			 * ii) addrs[i] did not change from the prior run, in order
+			 *     to validate assumptions made for computing branch
+			 *     displacements.
+			 */
+			if (unlikely(proglen + ilen > oldproglen ||
+				     proglen + ilen != addrs[i])) {
 				pr_err("bpf_jit: fatal error\n");
 				return -EFAULT;
 			}

[PATCH 4.19 17/18] init/Kconfig: make COMPILE_TEST depend on !S390

[Greg Kroah-Hartman]

From: Heiko Carstens <hca@linux.ibm.com>

commit 334ef6ed06fa1a54e35296b77b693bcf6d63ee9e upstream.

While allmodconfig and allyesconfig build for s390 there are also
various bots running compile tests with randconfig, where PCI is
disabled. This reveals that a lot of drivers should actually depend on
HAS_IOMEM.
Adding this to each device driver would be a never ending story,
therefore just disable COMPILE_TEST for s390.

The reasoning is more or less the same as described in
commit bc083a64b6c0 ("init/Kconfig: make COMPILE_TEST depend on !UML").

Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 init/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/init/Kconfig
+++ b/init/Kconfig
@@ -66,7 +66,7 @@ config INIT_ENV_ARG_LIMIT
 
 config COMPILE_TEST
 	bool "Compile also drivers which will not load"
-	depends on !UML
+	depends on !UML && !S390
 	default n
 	help
 	  Some drivers can be compiled on a different platform than they are

[PATCH 4.19 18/18] init/Kconfig: make COMPILE_TEST depend on HAS_IOMEM

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

commit ea29b20a828511de3348334e529a3d046a180416 upstream.

I read the commit log of the following two:

- bc083a64b6c0 ("init/Kconfig: make COMPILE_TEST depend on !UML")
- 334ef6ed06fa ("init/Kconfig: make COMPILE_TEST depend on !S390")

Both are talking about HAS_IOMEM dependency missing in many drivers.

So, 'depends on HAS_IOMEM' seems the direct, sensible solution to me.

This does not change the behavior of UML. UML still cannot enable
COMPILE_TEST because it does not provide HAS_IOMEM.

The current dependency for S390 is too strong. Under the condition of
CONFIG_PCI=y, S390 provides HAS_IOMEM, hence can enable COMPILE_TEST.

I also removed the meaningless 'default n'.

Link: https://lkml.kernel.org/r/20210224140809.1067582-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KP Singh <kpsingh@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Quentin Perret <qperret@google.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: "Enrico Weigelt, metux IT consult" <lkml@metux.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 init/Kconfig |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/init/Kconfig
+++ b/init/Kconfig
@@ -66,8 +66,7 @@ config INIT_ENV_ARG_LIMIT
 
 config COMPILE_TEST
 	bool "Compile also drivers which will not load"
-	depends on !UML && !S390
-	default n
+	depends on HAS_IOMEM
 	help
 	  Some drivers can be compiled on a different platform than they are
 	  intended to be run on. Despite they cannot be loaded there (or even

Re: [PATCH 4.19 00/18] 4.19.186-rc1 review

[Guenter Roeck]

On Fri, Apr 09, 2021 at 11:53:28AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.186 release.
> There are 18 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 11 Apr 2021 09:52:52 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 423 pass: 423 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.19 00/18] 4.19.186-rc1 review

[Shuah Khan]

On 4/9/21 3:53 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.186 release.
> There are 18 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 11 Apr 2021 09:52:52 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.186-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

I am seeing a new warn - will debug later on today and let you know
what I find:


WARNING: CPU: 9 PID: 0 at drivers/net/wireless/ath/ath10k/htt_rx.c:46 
ath10k_htt_rx_pop_paddr+0xde/0x100 [ath10k_core]
Modules linked in: cmac algif_hash algif_skcipher af_alg bnep arc4 
nls_iso8859_1 wmi_bmof snd_hda_codec_realtek snd_hda_codec_generic 
snd_hda_codec_hdmi edac_mce_amd snd_hda_intel snd_hda_codec kvm_amd 
snd_hda_core ccp snd_hwdep kvm snd_pcm snd_seq_midi crct10dif_pclmul 
snd_seq_midi_event ghash_clmulni_intel pcbc snd_rawmidi ath10k_pci 
snd_seq ath10k_core aesni_intel ath snd_seq_device rtsx_usb_ms btusb 
aes_x86_64 snd_timer crypto_simd btrtl cryptd joydev btbcm glue_helper 
memstick mac80211 snd btintel input_leds bluetooth soundcore cfg80211 
ecdh_generic video wmi mac_hid sch_fq_codel parport_pc ppdev lp parport 
drm ip_tables x_tables autofs4 hid_generic rtsx_usb_sdmmc usbhid 
rtsx_usb hid crc32_pclmul uas i2c_piix4 r8169 ahci realtek usb_storage 
libahci gpio_amdpt gpio_generic
CPU: 9 PID: 0 Comm: swapper/9 Not tainted 4.19.186-rc1+ #24
Hardware name: LENOVO 90Q30008US/3728, BIOS O4ZKT1CA 09/16/2020
RIP: 0010:ath10k_htt_rx_pop_paddr+0xde/0x100 [ath10k_core]
Code: 02 00 00 48 85 c9 74 30 4c 8b 49 28 4d 85 c9 74 1e 48 8b 30 45 31 
c0 b9 02 00 00 00 e8 9b 27 ca cc 4c 89 e0 4c 8b 65 f8 c9 c3 <0f> 0b 45 
31 e4 4c 89 e0 4c 8b 65 f8 c9 c3 48 8b 0d 1d df 4c cd eb
RSP: 0018:ffff8d81bf043da0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8d81927b2150 RCX: ffff8d81b8c01580
RDX: 0000000000000008 RSI: 00000000ff708a80 RDI: ffff8d81b8c01e78
RBP: ffff8d81bf043da8 R08: 0000000000200000 R09: 0000000000000000
R10: ffffdd1f0f40f300 R11: 000ffffffffff000 R12: ffff8d81b8c02068
R13: ffff8d81b8c01580 R14: ffff8d81927b2148 R15: ffff8d81b8c01580
FS:  0000000000000000(0000) GS:ffff8d81bf040000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055a2c99a2000 CR3: 00000003de8d4000 CR4: 0000000000340ee0
Call Trace:
  <IRQ>
  ath10k_htt_txrx_compl_task+0x58d/0xe70 [ath10k_core]
  ath10k_pci_napi_poll+0x52/0x110 [ath10k_pci]
  net_rx_action+0x13c/0x350
  __do_softirq+0xd4/0x2ae
  irq_exit+0x9c/0xe0
  do_IRQ+0x86/0xe0
  common_interrupt+0xf/0xf
  </IRQ>
RIP: 0010:cpuidle_enter_state+0x10b/0x2c0
Code: ff e8 f9 68 85 ff 80 7d c7 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 
0f 85 97 01 00 00 31 ff e8 6c 5d 8b ff fb 66 0f 1f 44 00 00 <48> b8 ff 
ff ff ff f3 01 00 00 4c 2b 7d c8 ba ff ff ff 7f 49 39 c7
RSP: 0018:ffffb11e01a77e50 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda
RAX: ffff8d81bf0626c0 RBX: ffff8d81b2690400 RCX: 00000006e8cb49d2
RDX: 0000000000000689 RSI: 00000006e8cb49d2 RDI: 0000000000000000
RBP: ffffb11e01a77e90 R08: 00000006e8cb505b R09: 0000000000000e29
R10: 0000000000000f04 R11: ffff8d81bf061528 R12: 0000000000000003
R13: ffffffff8df9e860 R14: ffffffff8df9e980 R15: 00000006e8cb505b
  cpuidle_enter+0x17/0x20

thanks,
-- Shuah

Re: [PATCH 4.19 00/18] 4.19.186-rc1 review

[Greg Kroah-Hartman]

On Fri, Apr 09, 2021 at 02:55:16PM -0600, Shuah Khan wrote:
> On 4/9/21 3:53 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.186 release.
> > There are 18 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun, 11 Apr 2021 09:52:52 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.186-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> I am seeing a new warn - will debug later on today and let you know
> what I find:
> 
> 
> WARNING: CPU: 9 PID: 0 at drivers/net/wireless/ath/ath10k/htt_rx.c:46
> ath10k_htt_rx_pop_paddr+0xde/0x100 [ath10k_core]
> Modules linked in: cmac algif_hash algif_skcipher af_alg bnep arc4
> nls_iso8859_1 wmi_bmof snd_hda_codec_realtek snd_hda_codec_generic
> snd_hda_codec_hdmi edac_mce_amd snd_hda_intel snd_hda_codec kvm_amd
> snd_hda_core ccp snd_hwdep kvm snd_pcm snd_seq_midi crct10dif_pclmul
> snd_seq_midi_event ghash_clmulni_intel pcbc snd_rawmidi ath10k_pci snd_seq
> ath10k_core aesni_intel ath snd_seq_device rtsx_usb_ms btusb aes_x86_64
> snd_timer crypto_simd btrtl cryptd joydev btbcm glue_helper memstick
> mac80211 snd btintel input_leds bluetooth soundcore cfg80211 ecdh_generic
> video wmi mac_hid sch_fq_codel parport_pc ppdev lp parport drm ip_tables
> x_tables autofs4 hid_generic rtsx_usb_sdmmc usbhid rtsx_usb hid crc32_pclmul
> uas i2c_piix4 r8169 ahci realtek usb_storage libahci gpio_amdpt gpio_generic
> CPU: 9 PID: 0 Comm: swapper/9 Not tainted 4.19.186-rc1+ #24
> Hardware name: LENOVO 90Q30008US/3728, BIOS O4ZKT1CA 09/16/2020
> RIP: 0010:ath10k_htt_rx_pop_paddr+0xde/0x100 [ath10k_core]
> Code: 02 00 00 48 85 c9 74 30 4c 8b 49 28 4d 85 c9 74 1e 48 8b 30 45 31 c0
> b9 02 00 00 00 e8 9b 27 ca cc 4c 89 e0 4c 8b 65 f8 c9 c3 <0f> 0b 45 31 e4 4c
> 89 e0 4c 8b 65 f8 c9 c3 48 8b 0d 1d df 4c cd eb
> RSP: 0018:ffff8d81bf043da0 EFLAGS: 00010246
> RAX: 0000000000000000 RBX: ffff8d81927b2150 RCX: ffff8d81b8c01580
> RDX: 0000000000000008 RSI: 00000000ff708a80 RDI: ffff8d81b8c01e78
> RBP: ffff8d81bf043da8 R08: 0000000000200000 R09: 0000000000000000
> R10: ffffdd1f0f40f300 R11: 000ffffffffff000 R12: ffff8d81b8c02068
> R13: ffff8d81b8c01580 R14: ffff8d81927b2148 R15: ffff8d81b8c01580
> FS:  0000000000000000(0000) GS:ffff8d81bf040000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 000055a2c99a2000 CR3: 00000003de8d4000 CR4: 0000000000340ee0
> Call Trace:
>  <IRQ>
>  ath10k_htt_txrx_compl_task+0x58d/0xe70 [ath10k_core]
>  ath10k_pci_napi_poll+0x52/0x110 [ath10k_pci]
>  net_rx_action+0x13c/0x350
>  __do_softirq+0xd4/0x2ae
>  irq_exit+0x9c/0xe0
>  do_IRQ+0x86/0xe0
>  common_interrupt+0xf/0xf
>  </IRQ>
> RIP: 0010:cpuidle_enter_state+0x10b/0x2c0
> Code: ff e8 f9 68 85 ff 80 7d c7 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f
> 85 97 01 00 00 31 ff e8 6c 5d 8b ff fb 66 0f 1f 44 00 00 <48> b8 ff ff ff ff
> f3 01 00 00 4c 2b 7d c8 ba ff ff ff 7f 49 39 c7
> RSP: 0018:ffffb11e01a77e50 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda
> RAX: ffff8d81bf0626c0 RBX: ffff8d81b2690400 RCX: 00000006e8cb49d2
> RDX: 0000000000000689 RSI: 00000006e8cb49d2 RDI: 0000000000000000
> RBP: ffffb11e01a77e90 R08: 00000006e8cb505b R09: 0000000000000e29
> R10: 0000000000000f04 R11: ffff8d81bf061528 R12: 0000000000000003
> R13: ffffffff8df9e860 R14: ffffffff8df9e980 R15: 00000006e8cb505b
>  cpuidle_enter+0x17/0x20
> 

Odd, there's no ath10k changes in here, only one wireless core change.
Bisection would be great if you can do that, thanks!

greg k-h

Re: [PATCH 4.19 00/18] 4.19.186-rc1 review

[Naresh Kamboju]

On Fri, 9 Apr 2021 at 15:27, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.186 release.
> There are 18 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 11 Apr 2021 09:52:52 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.186-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.19.186-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.19.y
* git commit: 6aba908ea95f2196c499c922cfae662412d5040a
* git describe: v4.19.185-19-g6aba908ea95f
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.185-19-g6aba908ea95f

## No regressions (compared to v4.19.185)

## No fixes (compared to v4.19.185)

## Test result summary
 total: 67843, pass: 55043, fail: 1811, skip: 10773, xfail: 216,

## Build Summary
* arm: 96 total, 96 passed, 0 failed
* arm64: 24 total, 24 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 14 total, 13 passed, 1 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 39 total, 39 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 15 total, 14 passed, 1 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org