[PATCH v4 0/4] Mediatek MT8195 SCP support

[PATCH v4 0/4] Mediatek MT8195 SCP support

[Tinghan Shen]

Changes since v3:
- Add missing patch version in mail subject
- No change to patches.

Changes since v2:
- Add compatible for mt8192
- Convert mtk,scp.txt to mtk,scp.yaml 
- Refine clock checking method

Changes since v1:
- Fix missing 'compatible' line in binding document

Tinghan Shen (4):
  dt-bindings: remoteproc: mediatek: Add binding for mt8195 scp
  dt-bindings: remoteproc: mediatek: Add binding for mt8192 scp
  dt-bindings: remoteproc: mediatek: Convert mtk,scp to json-schema
  remoteproc: mediatek: Support mt8195 scp

 .../bindings/remoteproc/mtk,scp.txt           | 36 --------
 .../bindings/remoteproc/mtk,scp.yaml          | 85 +++++++++++++++++++
 drivers/remoteproc/mtk_scp.c                  |  3 +-
 3 files changed, 87 insertions(+), 37 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
 create mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml

-- 
2.18.0

[PATCH v4 1/4] dt-bindings: remoteproc: mediatek: Add binding for mt8195 scp

[Tinghan Shen]

Add mt8195 compatible to binding document. The description of required
properties are also modified to reflect the hardware change between
mt8183 and mt8195. The mt8195 doesn't have to control the scp clock on
kernel side.

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
---
 Documentation/devicetree/bindings/remoteproc/mtk,scp.txt | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt b/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
index 3f5f78764b60..d64466eefbe3 100644
--- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
+++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
@@ -5,13 +5,15 @@ This binding provides support for ARM Cortex M4 Co-processor found on some
 Mediatek SoCs.
 
 Required properties:
-- compatible		Should be "mediatek,mt8183-scp"
+- compatible		Should be one of:
+				"mediatek,mt8183-scp"
+				"mediatek,mt8195-scp"
 - reg			Should contain the address ranges for memory regions:
 			SRAM, CFG, and L1TCM.
 - reg-names		Contains the corresponding names for the memory regions:
 			"sram", "cfg", and "l1tcm".
-- clocks		Clock for co-processor (See: ../clock/clock-bindings.txt)
-- clock-names		Contains the corresponding name for the clock. This
+- clocks		Required by mt8183. Clock for co-processor (See: ../clock/clock-bindings.txt)
+- clock-names		Required by mt8183. Contains the corresponding name for the clock. This
 			should be named "main".
 
 Subnodes
-- 
2.18.0

[PATCH v4 2/4] dt-bindings: remoteproc: mediatek: Add binding for mt8192 scp

[Tinghan Shen]

Add mt8192 compatible to binding document.

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
---
 Documentation/devicetree/bindings/remoteproc/mtk,scp.txt | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt b/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
index d64466eefbe3..88f37dee7bca 100644
--- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
+++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
@@ -7,14 +7,17 @@ Mediatek SoCs.
 Required properties:
 - compatible		Should be one of:
 				"mediatek,mt8183-scp"
+				"mediatek,mt8192-scp"
 				"mediatek,mt8195-scp"
 - reg			Should contain the address ranges for memory regions:
 			SRAM, CFG, and L1TCM.
 - reg-names		Contains the corresponding names for the memory regions:
 			"sram", "cfg", and "l1tcm".
-- clocks		Required by mt8183. Clock for co-processor (See: ../clock/clock-bindings.txt)
-- clock-names		Required by mt8183. Contains the corresponding name for the clock. This
-			should be named "main".
+- clocks		Required by mt8183 and mt8192. Clock for co-processor
+			(See: ../clock/clock-bindings.txt)
+- clock-names		Required by mt8183 and mt8192. Contains the
+			corresponding name for the clock. This should be
+			named "main".
 
 Subnodes
 --------
-- 
2.18.0

[PATCH v4 3/4] dt-bindings: remoteproc: mediatek: Convert mtk,scp to json-schema

[Tinghan Shen]

Convert the mtk,scp binding to DT schema format using json-schema.

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
---
 .../bindings/remoteproc/mtk,scp.txt           | 41 ---------
 .../bindings/remoteproc/mtk,scp.yaml          | 85 +++++++++++++++++++
 2 files changed, 85 insertions(+), 41 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
 create mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt b/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
deleted file mode 100644
index 88f37dee7bca..000000000000
--- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Mediatek SCP Bindings
-----------------------------------------
-
-This binding provides support for ARM Cortex M4 Co-processor found on some
-Mediatek SoCs.
-
-Required properties:
-- compatible		Should be one of:
-				"mediatek,mt8183-scp"
-				"mediatek,mt8192-scp"
-				"mediatek,mt8195-scp"
-- reg			Should contain the address ranges for memory regions:
-			SRAM, CFG, and L1TCM.
-- reg-names		Contains the corresponding names for the memory regions:
-			"sram", "cfg", and "l1tcm".
-- clocks		Required by mt8183 and mt8192. Clock for co-processor
-			(See: ../clock/clock-bindings.txt)
-- clock-names		Required by mt8183 and mt8192. Contains the
-			corresponding name for the clock. This should be
-			named "main".
-
-Subnodes
---------
-
-Subnodes of the SCP represent rpmsg devices. The names of the devices are not
-important. The properties of these nodes are defined by the individual bindings
-for the rpmsg devices - but must contain the following property:
-
-- mtk,rpmsg-name	Contains the name for the rpmsg device. Used to match
-			the subnode to rpmsg device announced by SCP.
-
-Example:
-
-	scp: scp@10500000 {
-		compatible = "mediatek,mt8183-scp";
-		reg = <0 0x10500000 0 0x80000>,
-		      <0 0x105c0000 0 0x5000>;
-		reg-names = "sram", "cfg";
-		clocks = <&infracfg CLK_INFRA_SCPSYS>;
-		clock-names = "main";
-	};
diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
new file mode 100644
index 000000000000..dc5fcbe65dae
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/mtk,scp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek SCP Bindings
+
+maintainers:
+  - Tinghan Shen <tinghan.shen@mediatek.com>
+
+description:
+  This binding provides support for ARM Cortex M4 Co-processor found on some
+  Mediatek SoCs.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-scp
+      - mediatek,mt8192-scp
+      - mediatek,mt8195-scp
+
+  reg:
+    description: |
+      Should contain the address ranges for memory regions SRAM and CFG,
+    maxItems: 2
+
+  reg-names:
+    description: |
+      Contains the corresponding names for the two memory regions. These
+      should be named "sram", "cfg".
+
+  clocks:
+    description: |
+        Clock for co-processor (see ../clock/clock-bindings.txt).
+        Required by mt8183 and mt8192.
+    maxItems: 1
+
+  clock-names:
+    description: |
+      Contains the corresponding name for the clock. This should be
+      named "main". Required by mt8183 and mt8192.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+patternProperties:
+  ".*":
+    if:
+      type: object
+    then:
+      description:
+        Subnodes of the SCP represent rpmsg devices. The names of the devices
+        are not important. The properties of these nodes are defined by the
+        individual bindings for the rpmsg devices.
+
+      properties:
+        mtk,rpmsg-name:
+          description:
+            Contains the name for the rpmsg device. Used to match
+            the subnode to rpmsg device announced by SCP.
+
+      required:
+        - mtk,rpmsg-name
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        scp: scp@10500000 {
+            compatible = "mediatek,mt8183-scp";
+            reg = <0 0x10500000 0 0x80000>,
+                  <0 0x105c0000 0 0x5000>;
+            reg-names = "sram", "cfg";
+            clocks = <&infracfg CLK_INFRA_SCPSYS>;
+            clock-names = "main";
+        };
+    };
-- 
2.18.0

[PATCH v4 4/4] remoteproc: mediatek: Support mt8195 scp

[Tinghan Shen]

The SCP clock design is changed on mt8195 that doesn't need to control
SCP clock on kernel side.

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
---
 drivers/remoteproc/mtk_scp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index 9679cc26895e..250cb946ea37 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -785,7 +785,7 @@ static int scp_probe(struct platform_device *pdev)
 	if (ret)
 		goto destroy_mutex;
 
-	scp->clk = devm_clk_get(dev, "main");
+	scp->clk = devm_clk_get_optional(dev, "main");
 	if (IS_ERR(scp->clk)) {
 		dev_err(dev, "Failed to get clock\n");
 		ret = PTR_ERR(scp->clk);
@@ -877,6 +877,7 @@ static const struct mtk_scp_of_data mt8192_of_data = {
 static const struct of_device_id mtk_scp_of_match[] = {
 	{ .compatible = "mediatek,mt8183-scp", .data = &mt8183_of_data },
 	{ .compatible = "mediatek,mt8192-scp", .data = &mt8192_of_data },
+	{ .compatible = "mediatek,mt8195-scp", .data = &mt8192_of_data },
 	{},
 };
 MODULE_DEVICE_TABLE(of, mtk_scp_of_match);
-- 
2.18.0

Re: [PATCH v4 4/4] remoteproc: mediatek: Support mt8195 scp

[Tzung-Bi Shih]

On Wed, Jul 28, 2021 at 11:58:59AM +0800, Tinghan Shen wrote:
> The SCP clock design is changed on mt8195 that doesn't need to control
> SCP clock on kernel side.
>
> Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>

Re: [PATCH v4 3/4] dt-bindings: remoteproc: mediatek: Convert mtk,scp to json-schema

[Bjorn Andersson]

On Tue 27 Jul 22:58 CDT 2021, Tinghan Shen wrote:

> Convert the mtk,scp binding to DT schema format using json-schema.
> 
> Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
> ---
>  .../bindings/remoteproc/mtk,scp.txt           | 41 ---------
>  .../bindings/remoteproc/mtk,scp.yaml          | 85 +++++++++++++++++++
>  2 files changed, 85 insertions(+), 41 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt b/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
> deleted file mode 100644
> index 88f37dee7bca..000000000000
> --- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -Mediatek SCP Bindings
> -----------------------------------------
> -
> -This binding provides support for ARM Cortex M4 Co-processor found on some
> -Mediatek SoCs.
> -
> -Required properties:
> -- compatible		Should be one of:
> -				"mediatek,mt8183-scp"
> -				"mediatek,mt8192-scp"
> -				"mediatek,mt8195-scp"
> -- reg			Should contain the address ranges for memory regions:
> -			SRAM, CFG, and L1TCM.
> -- reg-names		Contains the corresponding names for the memory regions:
> -			"sram", "cfg", and "l1tcm".
> -- clocks		Required by mt8183 and mt8192. Clock for co-processor
> -			(See: ../clock/clock-bindings.txt)
> -- clock-names		Required by mt8183 and mt8192. Contains the
> -			corresponding name for the clock. This should be
> -			named "main".
> -
> -Subnodes
> ---------
> -
> -Subnodes of the SCP represent rpmsg devices. The names of the devices are not
> -important. The properties of these nodes are defined by the individual bindings
> -for the rpmsg devices - but must contain the following property:
> -
> -- mtk,rpmsg-name	Contains the name for the rpmsg device. Used to match
> -			the subnode to rpmsg device announced by SCP.
> -
> -Example:
> -
> -	scp: scp@10500000 {
> -		compatible = "mediatek,mt8183-scp";
> -		reg = <0 0x10500000 0 0x80000>,
> -		      <0 0x105c0000 0 0x5000>;
> -		reg-names = "sram", "cfg";
> -		clocks = <&infracfg CLK_INFRA_SCPSYS>;
> -		clock-names = "main";
> -	};
> diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
> new file mode 100644
> index 000000000000..dc5fcbe65dae
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
> @@ -0,0 +1,85 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/mtk,scp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek SCP Bindings
> +
> +maintainers:
> +  - Tinghan Shen <tinghan.shen@mediatek.com>
> +
> +description:
> +  This binding provides support for ARM Cortex M4 Co-processor found on some
> +  Mediatek SoCs.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - mediatek,mt8183-scp
> +      - mediatek,mt8192-scp
> +      - mediatek,mt8195-scp
> +
> +  reg:
> +    description: |

The '|' means that you want to preserve the formatting of the text
segment, there's no need for that.

> +      Should contain the address ranges for memory regions SRAM and CFG,
> +    maxItems: 2
> +
> +  reg-names:
> +    description: |
> +      Contains the corresponding names for the two memory regions. These
> +      should be named "sram", "cfg".

  reg-names:
    items:
      - sram
      - cfg

> +
> +  clocks:
> +    description: |
> +        Clock for co-processor (see ../clock/clock-bindings.txt).
> +        Required by mt8183 and mt8192.
> +    maxItems: 1
> +
> +  clock-names:
> +    description: |
> +      Contains the corresponding name for the clock. This should be
> +      named "main". Required by mt8183 and mt8192.

  clock-names:
    const: main

> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names

The old binding, and the comment about clocks above, says that clocks
and clock-names are required for mt8183 and mt8192.

> +
> +patternProperties:
> +  ".*":
> +    if:
> +      type: object
> +    then:
> +      description:
> +        Subnodes of the SCP represent rpmsg devices. The names of the devices
> +        are not important. The properties of these nodes are defined by the
> +        individual bindings for the rpmsg devices.
> +
> +      properties:
> +        mtk,rpmsg-name:
> +          description:
> +            Contains the name for the rpmsg device. Used to match
> +            the subnode to rpmsg device announced by SCP.
> +
> +      required:
> +        - mtk,rpmsg-name
> +
> +additionalProperties: true

What additional properties do you expect?

> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/mt8183-clk.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;

Skip soc and the two #-cells, and rewrite the reg to only use 1 address
and size-cell.

> +        scp: scp@10500000 {

The label doesn't add value in the example, please skip this.

> +            compatible = "mediatek,mt8183-scp";
> +            reg = <0 0x10500000 0 0x80000>,
> +                  <0 0x105c0000 0 0x5000>;
> +            reg-names = "sram", "cfg";
> +            clocks = <&infracfg CLK_INFRA_SCPSYS>;
> +            clock-names = "main";

Can you please also add a subnode, to capture that part of the binding
as well?

Regards,
Bjorn

> +        };
> +    };
> -- 
> 2.18.0
> 

Re: [PATCH v4 4/4] remoteproc: mediatek: Support mt8195 scp

[Bjorn Andersson]

On Tue 27 Jul 22:58 CDT 2021, Tinghan Shen wrote:

> The SCP clock design is changed on mt8195 that doesn't need to control
> SCP clock on kernel side.
> 
> Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
> ---
>  drivers/remoteproc/mtk_scp.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
> index 9679cc26895e..250cb946ea37 100644
> --- a/drivers/remoteproc/mtk_scp.c
> +++ b/drivers/remoteproc/mtk_scp.c
> @@ -785,7 +785,7 @@ static int scp_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto destroy_mutex;
>  
> -	scp->clk = devm_clk_get(dev, "main");
> +	scp->clk = devm_clk_get_optional(dev, "main");

This makes the clock optional for mt8183 and mt8192 as well.

How about using mtk_scp_of_data to denote if the clock should be
acquired?

Regards,
Bjorn

>  	if (IS_ERR(scp->clk)) {
>  		dev_err(dev, "Failed to get clock\n");
>  		ret = PTR_ERR(scp->clk);
> @@ -877,6 +877,7 @@ static const struct mtk_scp_of_data mt8192_of_data = {
>  static const struct of_device_id mtk_scp_of_match[] = {
>  	{ .compatible = "mediatek,mt8183-scp", .data = &mt8183_of_data },
>  	{ .compatible = "mediatek,mt8192-scp", .data = &mt8192_of_data },
> +	{ .compatible = "mediatek,mt8195-scp", .data = &mt8192_of_data },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, mtk_scp_of_match);
> -- 
> 2.18.0
> 

Re: [PATCH v4 1/4] dt-bindings: remoteproc: mediatek: Add binding for mt8195 scp

[Rob Herring]

On Wed, 28 Jul 2021 11:58:56 +0800, Tinghan Shen wrote:
> Add mt8195 compatible to binding document. The description of required
> properties are also modified to reflect the hardware change between
> mt8183 and mt8195. The mt8195 doesn't have to control the scp clock on
> kernel side.
> 
> Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
> ---
>  Documentation/devicetree/bindings/remoteproc/mtk,scp.txt | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 2/4] dt-bindings: remoteproc: mediatek: Add binding for mt8192 scp

[Rob Herring]

On Wed, 28 Jul 2021 11:58:57 +0800, Tinghan Shen wrote:
> Add mt8192 compatible to binding document.
> 
> Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
> ---
>  Documentation/devicetree/bindings/remoteproc/mtk,scp.txt | 9 ++++++---
>  1 file changed, 6 insertions(+), 3 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 3/4] dt-bindings: remoteproc: mediatek: Convert mtk,scp to json-schema

[Rob Herring]

On Wed, Jul 28, 2021 at 11:58:58AM +0800, Tinghan Shen wrote:
> Convert the mtk,scp binding to DT schema format using json-schema.
> 
> Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
> ---
>  .../bindings/remoteproc/mtk,scp.txt           | 41 ---------
>  .../bindings/remoteproc/mtk,scp.yaml          | 85 +++++++++++++++++++
>  2 files changed, 85 insertions(+), 41 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt b/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
> deleted file mode 100644
> index 88f37dee7bca..000000000000
> --- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -Mediatek SCP Bindings
> -----------------------------------------
> -
> -This binding provides support for ARM Cortex M4 Co-processor found on some
> -Mediatek SoCs.
> -
> -Required properties:
> -- compatible		Should be one of:
> -				"mediatek,mt8183-scp"
> -				"mediatek,mt8192-scp"
> -				"mediatek,mt8195-scp"
> -- reg			Should contain the address ranges for memory regions:
> -			SRAM, CFG, and L1TCM.
> -- reg-names		Contains the corresponding names for the memory regions:
> -			"sram", "cfg", and "l1tcm".
> -- clocks		Required by mt8183 and mt8192. Clock for co-processor
> -			(See: ../clock/clock-bindings.txt)
> -- clock-names		Required by mt8183 and mt8192. Contains the
> -			corresponding name for the clock. This should be
> -			named "main".
> -
> -Subnodes
> ---------
> -
> -Subnodes of the SCP represent rpmsg devices. The names of the devices are not
> -important. The properties of these nodes are defined by the individual bindings
> -for the rpmsg devices - but must contain the following property:
> -
> -- mtk,rpmsg-name	Contains the name for the rpmsg device. Used to match
> -			the subnode to rpmsg device announced by SCP.
> -
> -Example:
> -
> -	scp: scp@10500000 {
> -		compatible = "mediatek,mt8183-scp";
> -		reg = <0 0x10500000 0 0x80000>,
> -		      <0 0x105c0000 0 0x5000>;
> -		reg-names = "sram", "cfg";
> -		clocks = <&infracfg CLK_INFRA_SCPSYS>;
> -		clock-names = "main";
> -	};
> diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
> new file mode 100644
> index 000000000000..dc5fcbe65dae
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
> @@ -0,0 +1,85 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/mtk,scp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek SCP Bindings
> +
> +maintainers:
> +  - Tinghan Shen <tinghan.shen@mediatek.com>
> +
> +description:
> +  This binding provides support for ARM Cortex M4 Co-processor found on some
> +  Mediatek SoCs.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - mediatek,mt8183-scp
> +      - mediatek,mt8192-scp
> +      - mediatek,mt8195-scp
> +
> +  reg:
> +    description: |
> +      Should contain the address ranges for memory regions SRAM and CFG,
> +    maxItems: 2
> +
> +  reg-names:
> +    description: |
> +      Contains the corresponding names for the two memory regions. These
> +      should be named "sram", "cfg".
> +
> +  clocks:
> +    description: |
> +        Clock for co-processor (see ../clock/clock-bindings.txt).
> +        Required by mt8183 and mt8192.
> +    maxItems: 1
> +
> +  clock-names:
> +    description: |
> +      Contains the corresponding name for the clock. This should be
> +      named "main". Required by mt8183 and mt8192.
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +
> +patternProperties:
> +  ".*":
> +    if:
> +      type: object
> +    then:

This can be replaced with:

additionalProperties:
  type: object
  ... and the rest below here:

> +      description:
> +        Subnodes of the SCP represent rpmsg devices. The names of the devices
> +        are not important. The properties of these nodes are defined by the
> +        individual bindings for the rpmsg devices.
> +
> +      properties:
> +        mtk,rpmsg-name:
> +          description:
> +            Contains the name for the rpmsg device. Used to match
> +            the subnode to rpmsg device announced by SCP.
> +
> +      required:
> +        - mtk,rpmsg-name
> +
> +additionalProperties: true
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/mt8183-clk.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +        scp: scp@10500000 {

Drop unused labels.

> +            compatible = "mediatek,mt8183-scp";
> +            reg = <0 0x10500000 0 0x80000>,
> +                  <0 0x105c0000 0 0x5000>;
> +            reg-names = "sram", "cfg";
> +            clocks = <&infracfg CLK_INFRA_SCPSYS>;
> +            clock-names = "main";
> +        };
> +    };
> -- 
> 2.18.0
> 
>