From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, linux-crypto@vger.kernel.org,
bhupesh.linux@gmail.com, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, robh+dt@kernel.org,
agross@kernel.org, herbert@gondor.apana.org.au,
davem@davemloft.net, stephan@gerhold.net,
Thara Gopinath <thara.gopinath@linaro.org>
Subject: Re: [PATCH v5 03/22] dt-bindings: qcom-bam: Convert binding to YAML
Date: Sat, 13 Nov 2021 13:13:16 -0600 [thread overview]
Message-ID: <YZAOTCQ0yIJUJTYO@builder.lan> (raw)
In-Reply-To: <20211110105922.217895-4-bhupesh.sharma@linaro.org>
On Wed 10 Nov 04:59 CST 2021, Bhupesh Sharma wrote:
> Convert Qualcomm BAM DMA devicetree binding to YAML.
>
> Cc: Thara Gopinath <thara.gopinath@linaro.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
> .../devicetree/bindings/dma/qcom_bam_dma.txt | 50 ----------
> .../devicetree/bindings/dma/qcom_bam_dma.yaml | 91 +++++++++++++++++++
> 2 files changed, 91 insertions(+), 50 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml
>
> diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> deleted file mode 100644
> index cf5b9e44432c..000000000000
> --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -QCOM BAM DMA controller
> -
> -Required properties:
> -- compatible: must be one of the following:
> - * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
> - * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
> - * "qcom,bam-v1.7.0" for MSM8916
> -- reg: Address range for DMA registers
> -- interrupts: Should contain the one interrupt shared by all channels
> -- #dma-cells: must be <1>, the cell in the dmas property of the client device
> - represents the channel number
> -- clocks: required clock
> -- clock-names: must contain "bam_clk" entry
> -- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
> - the secure world.
> -- qcom,controlled-remotely : optional, indicates that the bam is controlled by
> - remote proccessor i.e. execution environment.
> -- num-channels : optional, indicates supported number of DMA channels in a
> - remotely controlled bam.
> -- qcom,num-ees : optional, indicates supported number of Execution Environments
> - in a remotely controlled bam.
> -
> -Example:
> -
> - uart-bam: dma@f9984000 = {
> - compatible = "qcom,bam-v1.4.0";
> - reg = <0xf9984000 0x15000>;
> - interrupts = <0 94 0>;
> - clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
> - clock-names = "bam_clk";
> - #dma-cells = <1>;
> - qcom,ee = <0>;
> - };
> -
> -DMA clients must use the format described in the dma.txt file, using a two cell
> -specifier for each channel.
> -
> -Example:
> - serial@f991e000 {
> - compatible = "qcom,msm-uart";
> - reg = <0xf991e000 0x1000>
> - <0xf9944000 0x19000>;
> - interrupts = <0 108 0>;
> - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
> - <&gcc GCC_BLSP1_AHB_CLK>;
> - clock-names = "core", "iface";
> -
> - dmas = <&uart-bam 0>, <&uart-bam 1>;
> - dma-names = "rx", "tx";
> - };
> diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml
> new file mode 100644
> index 000000000000..3ca222bd10bd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml
> @@ -0,0 +1,91 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/qcom_bam_dma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: QCOM BAM DMA controller binding
> +
> +maintainers:
> + - Bhupesh Sharma <bhupesh.sharma@linaro.org>
> +
> +description: |
> + This document defines the binding for the BAM DMA controller
> + found on Qualcomm parts.
> +
> +allOf:
> + - $ref: "dma-controller.yaml#"
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,bam-v1.3.0 # for APQ8064, IPQ8064 and MSM8960
> + - qcom,bam-v1.4.0 # for MSM8974, APQ8074 and APQ8084
> + - qcom,bam-v1.7.0 # for MSM8916
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + const: bam_clk
> +
> + interrupts:
> + minItems: 1
> + maxItems: 31
The old binding uses the wording "the one interrupt" and at least the
Linux implementation indicates that there's only a single interrupt.
So I think this should just be maxItems: 1
> +
> + num-channels:
> + maximum: 31
> + description:
> + Indicates supported number of DMA channels in a remotely controlled bam.
> +
> + "#dma-cells":
> + const: 1
> + description: The single cell represents the channel index.
> +
> + qcom,ee:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 7
> + description:
> + Indicates the active Execution Environment identifier (0-7)
> + used in the secure world.
> +
> + qcom,controlled-remotely:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + Indicates that the bam is controlled by remote proccessor i.e.
> + execution environment.
> +
> + qcom,num-ees:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 31
> + default: 2
> + description:
> + Indicates supported number of Execution Environments in a
> + remotely controlled bam.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - "#dma-cells"
> + - qcom,ee
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,gcc-msm8974.h>
> + dma-controller@f9984000 {
> + compatible = "qcom,bam-v1.4.0";
> + reg = <0xf9984000 0x15000>;
> + interrupts = <0 94 0>;
While the txt->yaml conversion should retain the original content, I
think it's okay to fix this line up while you're at it; and make it:
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
Regards,
Bjorn
> + clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
> + clock-names = "bam_clk";
> + #dma-cells = <1>;
> + qcom,ee = <0>;
> + };
> --
> 2.31.1
>
next prev parent reply other threads:[~2021-11-13 19:13 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-10 10:59 [PATCH v5 00/22] Enable Qualcomm Crypto Engine on sm8150 & sm8250 Bhupesh Sharma
2021-11-10 10:59 ` [PATCH v5 01/22] arm64: dts: qcom: msm8996: Fix qcom,controlled-remotely property Bhupesh Sharma
2021-11-10 10:59 ` [PATCH v5 02/22] arm64: dts: qcom: msm8996: Fix 'dma' nodes in dts Bhupesh Sharma
2021-11-17 5:53 ` Vinod Koul
2021-11-10 10:59 ` [PATCH v5 03/22] dt-bindings: qcom-bam: Convert binding to YAML Bhupesh Sharma
2021-11-10 19:44 ` Rob Herring
2021-11-15 6:04 ` Bhupesh Sharma
2021-11-12 8:41 ` Vladimir Zapolskiy
2021-11-15 6:00 ` Bhupesh Sharma
2021-11-13 19:13 ` Bjorn Andersson [this message]
2021-11-15 8:05 ` Bhupesh Sharma
2021-11-10 10:59 ` [PATCH v5 04/22] dt-bindings: qcom-bam: Add 'interconnects' & 'interconnect-names' to optional properties Bhupesh Sharma
2021-11-18 23:52 ` Rob Herring
2021-11-10 10:59 ` [PATCH v5 05/22] dt-bindings: qcom-bam: Add 'iommus' " Bhupesh Sharma
2021-11-18 23:52 ` Rob Herring
2021-11-10 10:59 ` [PATCH v5 06/22] dt-bindings: qcom-bam: Add "powered remotely" mode Bhupesh Sharma
2021-11-12 10:20 ` Vladimir Zapolskiy
2021-11-10 10:59 ` [PATCH v5 07/22] dt-bindings: qcom-qce: Convert bindings to yaml Bhupesh Sharma
2021-11-13 19:41 ` Bjorn Andersson
2021-11-10 10:59 ` [PATCH v5 08/22] dt-bindings: qcom-qce: Add 'interconnects' and 'interconnect-names' Bhupesh Sharma
2021-11-18 23:53 ` Rob Herring
2021-11-10 10:59 ` [PATCH v5 09/22] dt-bindings: qcom-qce: Move 'clocks' to optional properties Bhupesh Sharma
2021-11-13 20:02 ` Bjorn Andersson
2021-11-15 5:34 ` Bhupesh Sharma
2021-11-18 23:57 ` Rob Herring
2021-11-10 10:59 ` [PATCH v5 10/22] dt-bindings: qcom-qce: Add 'iommus' " Bhupesh Sharma
2021-11-13 21:23 ` Bjorn Andersson
2021-11-10 10:59 ` [PATCH v5 11/22] dt-bindings: crypto : Add new compatible strings for qcom-qce Bhupesh Sharma
2021-11-12 10:25 ` Vladimir Zapolskiy
2021-11-15 5:28 ` Bhupesh Sharma
2021-11-10 10:59 ` [PATCH v5 12/22] arm64/dts: qcom: Use new compatibles for crypto nodes Bhupesh Sharma
2021-11-12 10:26 ` Vladimir Zapolskiy
2021-11-15 5:04 ` Bhupesh Sharma
2021-11-10 10:59 ` [PATCH v5 13/22] dma: qcom: bam_dma: Add support to initialize interconnect path Bhupesh Sharma
2021-11-12 10:32 ` Vladimir Zapolskiy
2021-11-15 5:27 ` Bhupesh Sharma
2021-11-15 17:53 ` Bjorn Andersson
2022-05-12 23:39 ` Dmitry Baryshkov
2021-11-10 10:59 ` [PATCH v5 14/22] crypto: qce: core: " Bhupesh Sharma
2021-11-12 10:40 ` Vladimir Zapolskiy
2021-11-15 18:25 ` Bjorn Andersson
2021-11-10 10:59 ` [PATCH v5 15/22] crypto: qce: Add new compatibles for qce crypto driver Bhupesh Sharma
2021-11-12 10:36 ` Vladimir Zapolskiy
2021-11-15 5:07 ` Bhupesh Sharma
2021-11-10 10:59 ` [PATCH v5 16/22] crypto: qce: core: Make clocks optional Bhupesh Sharma
2021-11-15 18:06 ` Bjorn Andersson
2021-11-10 10:59 ` [PATCH v5 17/22] crypto: qce: Print a failure msg in case probe() fails Bhupesh Sharma
2021-11-12 10:42 ` Vladimir Zapolskiy
2021-11-15 5:14 ` Bhupesh Sharma
2021-11-15 18:10 ` Bjorn Andersson
2021-11-10 10:59 ` [PATCH v5 18/22] crypto: qce: Defer probing if BAM dma channel is not yet initialized Bhupesh Sharma
2021-11-15 18:29 ` Bjorn Andersson
2021-11-10 10:59 ` [PATCH v5 19/22] crypto: qce: Add 'sm8250-qce' compatible string check Bhupesh Sharma
2021-11-15 18:32 ` Bjorn Andersson
2021-11-10 10:59 ` [PATCH v5 20/22] crypto: qce: Add 'sm8150-qce' " Bhupesh Sharma
2021-11-10 10:59 ` [PATCH v5 21/22] arm64/dts: qcom: sm8250: Add dt entries to support crypto engine Bhupesh Sharma
2021-11-15 18:34 ` Bjorn Andersson
2021-11-15 20:11 ` Bjorn Andersson
2021-11-10 10:59 ` [PATCH v5 22/22] arm64/dts: qcom: sm8150: " Bhupesh Sharma
2022-02-11 21:49 ` [PATCH v5 00/22] Enable Qualcomm Crypto Engine on sm8150 & sm8250 Jordan Crouse
2021-12-20 15:13 [PATCH v5 03/22] dt-bindings: qcom-bam: Convert binding to YAML David Heidelberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YZAOTCQ0yIJUJTYO@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=bhupesh.linux@gmail.com \
--cc=bhupesh.sharma@linaro.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=herbert@gondor.apana.org.au \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=stephan@gerhold.net \
--cc=thara.gopinath@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).