[PATCH v2 1/2] phy: qualcomm: ipq806x-usb: Fix kernel-doc style

[PATCH v2 1/2] phy: qualcomm: ipq806x-usb: Fix kernel-doc style

[Vinod Koul]

The functions are documented but there were style issues, so fix
the style and add missing description for phy_dwc3

drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:130:
drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:174:
drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:212: warning:
This comment starts with '/**', but isn't a kernel-doc comment.
Refer Documentation/doc-guide/kernel-doc.rst

Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---

Changes in v2: use () for function names
update description of @phy_dwc3

 drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 26 +++++++++++----------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
index bfff0c8c9130..fec1da470d26 100644
--- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
@@ -127,12 +127,13 @@ struct phy_drvdata {
 };
 
 /**
- * Write register and read back masked value to confirm it is written
+ * usb_phy_write_readback() - Write register and read back masked value to
+ * confirm it is written
  *
- * @base - QCOM DWC3 PHY base virtual address.
- * @offset - register offset.
- * @mask - register bitmask specifying what should be updated
- * @val - value to write.
+ * @phy_dwc3: QCOM DWC3 phy context
+ * @offset: register offset.
+ * @mask: register bitmask specifying what should be updated
+ * @val: value to write.
  */
 static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3,
 					  u32 offset,
@@ -171,11 +172,11 @@ static int wait_for_latch(void __iomem *addr)
 }
 
 /**
- * Write SSPHY register
+ * usb_ss_write_phycreg() - Write SSPHY register
  *
- * @base - QCOM DWC3 PHY base virtual address.
- * @addr - SSPHY address to write.
- * @val - value to write.
+ * @phy_dwc3: QCOM DWC3 phy context
+ * @addr: SSPHY address to write.
+ * @val: value to write.
  */
 static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3,
 				u32 addr, u32 val)
@@ -209,10 +210,11 @@ static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3,
 }
 
 /**
- * Read SSPHY register.
+ * usb_ss_read_phycreg() - Read SSPHY register.
  *
- * @base - QCOM DWC3 PHY base virtual address.
- * @addr - SSPHY address to read.
+ * @phy_dwc3: QCOM DWC3 phy context
+ * @addr: SSPHY address to read.
+ * @val: pointer in which read is store.
  */
 static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3,
 			       u32 addr, u32 *val)
-- 
2.31.1

[PATCH v2 2/2] phy: ti: omap-usb2: Fix the kernel-doc style

[Vinod Koul]

The documentation uses incorrect style, so fix that.

drivers/phy/ti/phy-omap-usb2.c:102: warning: Function parameter or member 'comparator' not described in 'omap_usb2_set_comparator'

While at it, use a single line for function description

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
Changes in v2: use () for function names

 drivers/phy/ti/phy-omap-usb2.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
index ebceb1520ce8..3a505fe5715a 100644
--- a/drivers/phy/ti/phy-omap-usb2.c
+++ b/drivers/phy/ti/phy-omap-usb2.c
@@ -89,9 +89,9 @@ static inline void omap_usb_writel(void __iomem *addr, unsigned int offset,
 }
 
 /**
- * omap_usb2_set_comparator - links the comparator present in the system with
- *	this phy
- * @comparator - the companion phy(comparator) for this phy
+ * omap_usb2_set_comparator() - links the comparator present in the system with this phy
+ *
+ * @comparator:  the companion phy(comparator) for this phy
  *
  * The phy companion driver should call this API passing the phy_companion
  * filled with set_vbus and start_srp to be used by usb phy.
-- 
2.31.1

Re: [PATCH v2 2/2] phy: ti: omap-usb2: Fix the kernel-doc style

[Liam Beguin]

Hi Vinod,

On Sat, Nov 20, 2021 at 11:45:31AM +0530, Vinod Koul wrote:
> The documentation uses incorrect style, so fix that.
> 
> drivers/phy/ti/phy-omap-usb2.c:102: warning: Function parameter or member 'comparator' not described in 'omap_usb2_set_comparator'
> 
> While at it, use a single line for function description
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> Changes in v2: use () for function names
> 
>  drivers/phy/ti/phy-omap-usb2.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
> index ebceb1520ce8..3a505fe5715a 100644
> --- a/drivers/phy/ti/phy-omap-usb2.c
> +++ b/drivers/phy/ti/phy-omap-usb2.c
> @@ -89,9 +89,9 @@ static inline void omap_usb_writel(void __iomem *addr, unsigned int offset,
>  }
>  
>  /**
> - * omap_usb2_set_comparator - links the comparator present in the system with
> - *	this phy
> - * @comparator - the companion phy(comparator) for this phy
> + * omap_usb2_set_comparator() - links the comparator present in the system with this phy

My apologies for the noise, I just noticed your v2.

Reviewed-by: Liam Beguin <liambeguin@gmail.com>

> + *
> + * @comparator:  the companion phy(comparator) for this phy
>   *
>   * The phy companion driver should call this API passing the phy_companion
>   * filled with set_vbus and start_srp to be used by usb phy.
> -- 
> 2.31.1
> 

Re: [PATCH v2 2/2] phy: ti: omap-usb2: Fix the kernel-doc style

[Vinod Koul]

On 20-11-21, 12:21, Liam Beguin wrote:
> Hi Vinod,
> 
> On Sat, Nov 20, 2021 at 11:45:31AM +0530, Vinod Koul wrote:
> > The documentation uses incorrect style, so fix that.
> > 
> > drivers/phy/ti/phy-omap-usb2.c:102: warning: Function parameter or member 'comparator' not described in 'omap_usb2_set_comparator'
> > 
> > While at it, use a single line for function description
> > 
> > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > ---
> > Changes in v2: use () for function names
> > 
> >  drivers/phy/ti/phy-omap-usb2.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
> > index ebceb1520ce8..3a505fe5715a 100644
> > --- a/drivers/phy/ti/phy-omap-usb2.c
> > +++ b/drivers/phy/ti/phy-omap-usb2.c
> > @@ -89,9 +89,9 @@ static inline void omap_usb_writel(void __iomem *addr, unsigned int offset,
> >  }
> >  
> >  /**
> > - * omap_usb2_set_comparator - links the comparator present in the system with
> > - *	this phy
> > - * @comparator - the companion phy(comparator) for this phy
> > + * omap_usb2_set_comparator() - links the comparator present in the system with this phy
> 
> My apologies for the noise, I just noticed your v2.

No worries :)
> 
> Reviewed-by: Liam Beguin <liambeguin@gmail.com>

Thanks

-- 
~Vinod

Re: [PATCH v2 1/2] phy: qualcomm: ipq806x-usb: Fix kernel-doc style

[Bjorn Andersson]

On Fri 19 Nov 22:15 PST 2021, Vinod Koul wrote:

> The functions are documented but there were style issues, so fix
> the style and add missing description for phy_dwc3
> 
> drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:130:
> drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:174:
> drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:212: warning:
> This comment starts with '/**', but isn't a kernel-doc comment.
> Refer Documentation/doc-guide/kernel-doc.rst
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> 
> Changes in v2: use () for function names
> update description of @phy_dwc3
> 
>  drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 26 +++++++++++----------
>  1 file changed, 14 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
> index bfff0c8c9130..fec1da470d26 100644
> --- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
> +++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
> @@ -127,12 +127,13 @@ struct phy_drvdata {
>  };
>  
>  /**
> - * Write register and read back masked value to confirm it is written
> + * usb_phy_write_readback() - Write register and read back masked value to
> + * confirm it is written
>   *
> - * @base - QCOM DWC3 PHY base virtual address.
> - * @offset - register offset.
> - * @mask - register bitmask specifying what should be updated
> - * @val - value to write.
> + * @phy_dwc3: QCOM DWC3 phy context
> + * @offset: register offset.
> + * @mask: register bitmask specifying what should be updated
> + * @val: value to write.
>   */
>  static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3,
>  					  u32 offset,
> @@ -171,11 +172,11 @@ static int wait_for_latch(void __iomem *addr)
>  }
>  
>  /**
> - * Write SSPHY register
> + * usb_ss_write_phycreg() - Write SSPHY register
>   *
> - * @base - QCOM DWC3 PHY base virtual address.
> - * @addr - SSPHY address to write.
> - * @val - value to write.
> + * @phy_dwc3: QCOM DWC3 phy context
> + * @addr: SSPHY address to write.
> + * @val: value to write.
>   */
>  static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3,
>  				u32 addr, u32 val)
> @@ -209,10 +210,11 @@ static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3,
>  }
>  
>  /**
> - * Read SSPHY register.
> + * usb_ss_read_phycreg() - Read SSPHY register.
>   *
> - * @base - QCOM DWC3 PHY base virtual address.
> - * @addr - SSPHY address to read.
> + * @phy_dwc3: QCOM DWC3 phy context
> + * @addr: SSPHY address to read.
> + * @val: pointer in which read is store.
>   */
>  static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3,
>  			       u32 addr, u32 *val)
> -- 
> 2.31.1
> 

Re: [PATCH v2 1/2] phy: qualcomm: ipq806x-usb: Fix kernel-doc style

[Vinod Koul]

On 20-11-21, 11:45, Vinod Koul wrote:
> The functions are documented but there were style issues, so fix
> the style and add missing description for phy_dwc3
> 
> drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:130:
> drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:174:
> drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c:212: warning:
> This comment starts with '/**', but isn't a kernel-doc comment.
> Refer Documentation/doc-guide/kernel-doc.rst

Applied both, thanks

-- 
~Vinod