* [PATCH v2] media: i2c: dw9714: add optional regulator support
@ 2021-11-26 9:01 Martin Kepplinger
2021-11-26 10:44 ` Sakari Ailus
2021-11-26 13:05 ` Mark Brown
0 siblings, 2 replies; 5+ messages in thread
From: Martin Kepplinger @ 2021-11-26 9:01 UTC (permalink / raw)
To: martin.kepplinger, mchehab, broonie, sakari.ailus
Cc: kernel, linux-kernel, linux-media, linux-pm, Angus Ainslie
From: Angus Ainslie <angus@akkea.ca>
Allow the dw9714 to control a regulator and adjust suspend() and resume()
to support both runtime and system pm.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
revision history
----------------
v2: (thank you Mark)
* simplify the regulator_get_optional() error path
* fix regulator usage during probe()
v1:
https://lore.kernel.org/linux-media/20211125080922.978583-1-martin.kepplinger@puri.sm/
drivers/media/i2c/dw9714.c | 39 ++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/drivers/media/i2c/dw9714.c b/drivers/media/i2c/dw9714.c
index 3863dfeb8293..e8cc19b89861 100644
--- a/drivers/media/i2c/dw9714.c
+++ b/drivers/media/i2c/dw9714.c
@@ -5,6 +5,7 @@
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-event.h>
@@ -36,6 +37,7 @@ struct dw9714_device {
struct v4l2_ctrl_handler ctrls_vcm;
struct v4l2_subdev sd;
u16 current_val;
+ struct regulator *vcc;
};
static inline struct dw9714_device *to_dw9714_vcm(struct v4l2_ctrl *ctrl)
@@ -145,6 +147,21 @@ static int dw9714_probe(struct i2c_client *client)
if (dw9714_dev == NULL)
return -ENOMEM;
+ dw9714_dev->vcc = devm_regulator_get_optional(&client->dev, "vcc");
+ if (IS_ERR(dw9714_dev->vcc)) {
+ dev_dbg(&client->dev, "No vcc regulator found: %ld\n",
+ PTR_ERR(dw9714_dev->vcc));
+ dw9714_dev->vcc = NULL;
+ }
+
+ if (dw9714_dev->vcc) {
+ rval = regulator_enable(dw9714_dev->vcc);
+ if (rval < 0) {
+ dev_err(&client->dev, "failed to enable vcc: %d\n", rval);
+ return rval;
+ }
+ }
+
v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops);
dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
V4L2_SUBDEV_FL_HAS_EVENTS;
@@ -200,6 +217,9 @@ static int __maybe_unused dw9714_vcm_suspend(struct device *dev)
struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
int ret, val;
+ if (pm_runtime_suspended(&client->dev))
+ return 0;
+
for (val = dw9714_dev->current_val & ~(DW9714_CTRL_STEPS - 1);
val >= 0; val -= DW9714_CTRL_STEPS) {
ret = dw9714_i2c_write(client,
@@ -208,6 +228,13 @@ static int __maybe_unused dw9714_vcm_suspend(struct device *dev)
dev_err_once(dev, "%s I2C failure: %d", __func__, ret);
usleep_range(DW9714_CTRL_DELAY_US, DW9714_CTRL_DELAY_US + 10);
}
+
+ if (dw9714_dev->vcc) {
+ ret = regulator_disable(dw9714_dev->vcc);
+ if (ret)
+ dev_err(dev, "Failed to disable vcc: %d\n", ret);
+ }
+
return 0;
}
@@ -224,6 +251,18 @@ static int __maybe_unused dw9714_vcm_resume(struct device *dev)
struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
int ret, val;
+ if (pm_runtime_suspended(&client->dev))
+ return 0;
+
+ if (dw9714_dev->vcc) {
+ ret = regulator_enable(dw9714_dev->vcc);
+ if (ret) {
+ dev_err(dev, "Failed to enable vcc: %d\n", ret);
+ return ret;
+ }
+ usleep_range(1000, 2000);
+ }
+
for (val = dw9714_dev->current_val % DW9714_CTRL_STEPS;
val < dw9714_dev->current_val + DW9714_CTRL_STEPS - 1;
val += DW9714_CTRL_STEPS) {
--
2.30.2
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v2] media: i2c: dw9714: add optional regulator support
2021-11-26 9:01 [PATCH v2] media: i2c: dw9714: add optional regulator support Martin Kepplinger
@ 2021-11-26 10:44 ` Sakari Ailus
2021-11-26 11:06 ` Martin Kepplinger
2021-11-26 13:05 ` Mark Brown
1 sibling, 1 reply; 5+ messages in thread
From: Sakari Ailus @ 2021-11-26 10:44 UTC (permalink / raw)
To: Martin Kepplinger
Cc: mchehab, broonie, kernel, linux-kernel, linux-media, linux-pm,
Angus Ainslie
Hi Martin,
On Fri, Nov 26, 2021 at 10:01:07AM +0100, Martin Kepplinger wrote:
> From: Angus Ainslie <angus@akkea.ca>
>
> Allow the dw9714 to control a regulator and adjust suspend() and resume()
> to support both runtime and system pm.
>
> Signed-off-by: Angus Ainslie <angus@akkea.ca>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>
> revision history
> ----------------
>
> v2: (thank you Mark)
> * simplify the regulator_get_optional() error path
> * fix regulator usage during probe()
>
> v1:
> https://lore.kernel.org/linux-media/20211125080922.978583-1-martin.kepplinger@puri.sm/
>
>
>
> drivers/media/i2c/dw9714.c | 39 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/drivers/media/i2c/dw9714.c b/drivers/media/i2c/dw9714.c
> index 3863dfeb8293..e8cc19b89861 100644
> --- a/drivers/media/i2c/dw9714.c
> +++ b/drivers/media/i2c/dw9714.c
> @@ -5,6 +5,7 @@
> #include <linux/i2c.h>
> #include <linux/module.h>
> #include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-device.h>
> #include <media/v4l2-event.h>
> @@ -36,6 +37,7 @@ struct dw9714_device {
> struct v4l2_ctrl_handler ctrls_vcm;
> struct v4l2_subdev sd;
> u16 current_val;
> + struct regulator *vcc;
> };
>
> static inline struct dw9714_device *to_dw9714_vcm(struct v4l2_ctrl *ctrl)
> @@ -145,6 +147,21 @@ static int dw9714_probe(struct i2c_client *client)
> if (dw9714_dev == NULL)
> return -ENOMEM;
>
> + dw9714_dev->vcc = devm_regulator_get_optional(&client->dev, "vcc");
You you used regular devm_regulator_get(), you could remove the error
handling below. If there's no regulator, you'll simply get a dummy one.
> + if (IS_ERR(dw9714_dev->vcc)) {
> + dev_dbg(&client->dev, "No vcc regulator found: %ld\n",
> + PTR_ERR(dw9714_dev->vcc));
> + dw9714_dev->vcc = NULL;
> + }
> +
> + if (dw9714_dev->vcc) {
With (dummy) regulators, these checks become unnecessary.
> + rval = regulator_enable(dw9714_dev->vcc);
> + if (rval < 0) {
> + dev_err(&client->dev, "failed to enable vcc: %d\n", rval);
> + return rval;
> + }
> + }
> +
> v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops);
> dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> V4L2_SUBDEV_FL_HAS_EVENTS;
> @@ -200,6 +217,9 @@ static int __maybe_unused dw9714_vcm_suspend(struct device *dev)
> struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> int ret, val;
>
> + if (pm_runtime_suspended(&client->dev))
> + return 0;
This can't take place in a runtime PM suspend callback. You'll need to add
system suspend callback for this.
> +
> for (val = dw9714_dev->current_val & ~(DW9714_CTRL_STEPS - 1);
> val >= 0; val -= DW9714_CTRL_STEPS) {
> ret = dw9714_i2c_write(client,
> @@ -208,6 +228,13 @@ static int __maybe_unused dw9714_vcm_suspend(struct device *dev)
> dev_err_once(dev, "%s I2C failure: %d", __func__, ret);
> usleep_range(DW9714_CTRL_DELAY_US, DW9714_CTRL_DELAY_US + 10);
> }
> +
> + if (dw9714_dev->vcc) {
> + ret = regulator_disable(dw9714_dev->vcc);
> + if (ret)
> + dev_err(dev, "Failed to disable vcc: %d\n", ret);
> + }
> +
> return 0;
> }
>
> @@ -224,6 +251,18 @@ static int __maybe_unused dw9714_vcm_resume(struct device *dev)
> struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> int ret, val;
>
> + if (pm_runtime_suspended(&client->dev))
Same for this one.
> + return 0;
> +
> + if (dw9714_dev->vcc) {
> + ret = regulator_enable(dw9714_dev->vcc);
> + if (ret) {
> + dev_err(dev, "Failed to enable vcc: %d\n", ret);
> + return ret;
> + }
> + usleep_range(1000, 2000);
> + }
> +
> for (val = dw9714_dev->current_val % DW9714_CTRL_STEPS;
> val < dw9714_dev->current_val + DW9714_CTRL_STEPS - 1;
> val += DW9714_CTRL_STEPS) {
--
Kind regards,
Sakari Ailus
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v2] media: i2c: dw9714: add optional regulator support
2021-11-26 10:44 ` Sakari Ailus
@ 2021-11-26 11:06 ` Martin Kepplinger
2021-11-26 12:28 ` Sakari Ailus
0 siblings, 1 reply; 5+ messages in thread
From: Martin Kepplinger @ 2021-11-26 11:06 UTC (permalink / raw)
To: Sakari Ailus
Cc: mchehab, broonie, kernel, linux-kernel, linux-media, linux-pm,
Angus Ainslie
Am Freitag, dem 26.11.2021 um 12:44 +0200 schrieb Sakari Ailus:
> Hi Martin,
>
> On Fri, Nov 26, 2021 at 10:01:07AM +0100, Martin Kepplinger wrote:
> > From: Angus Ainslie <angus@akkea.ca>
> >
> > Allow the dw9714 to control a regulator and adjust suspend() and
> > resume()
> > to support both runtime and system pm.
> >
> > Signed-off-by: Angus Ainslie <angus@akkea.ca>
> > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> > ---
> >
> > revision history
> > ----------------
> >
> > v2: (thank you Mark)
> > * simplify the regulator_get_optional() error path
> > * fix regulator usage during probe()
> >
> > v1:
> > https://lore.kernel.org/linux-media/20211125080922.978583-1-martin.kepplinger@puri.sm/
> >
> >
> >
> > drivers/media/i2c/dw9714.c | 39
> > ++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 39 insertions(+)
> >
> > diff --git a/drivers/media/i2c/dw9714.c
> > b/drivers/media/i2c/dw9714.c
> > index 3863dfeb8293..e8cc19b89861 100644
> > --- a/drivers/media/i2c/dw9714.c
> > +++ b/drivers/media/i2c/dw9714.c
> > @@ -5,6 +5,7 @@
> > #include <linux/i2c.h>
> > #include <linux/module.h>
> > #include <linux/pm_runtime.h>
> > +#include <linux/regulator/consumer.h>
> > #include <media/v4l2-ctrls.h>
> > #include <media/v4l2-device.h>
> > #include <media/v4l2-event.h>
> > @@ -36,6 +37,7 @@ struct dw9714_device {
> > struct v4l2_ctrl_handler ctrls_vcm;
> > struct v4l2_subdev sd;
> > u16 current_val;
> > + struct regulator *vcc;
> > };
> >
> > static inline struct dw9714_device *to_dw9714_vcm(struct v4l2_ctrl
> > *ctrl)
> > @@ -145,6 +147,21 @@ static int dw9714_probe(struct i2c_client
> > *client)
> > if (dw9714_dev == NULL)
> > return -ENOMEM;
> >
> > + dw9714_dev->vcc = devm_regulator_get_optional(&client->dev,
> > "vcc");
>
> You you used regular devm_regulator_get(), you could remove the error
> handling below. If there's no regulator, you'll simply get a dummy
> one.
ok thanks
>
> > + if (IS_ERR(dw9714_dev->vcc)) {
> > + dev_dbg(&client->dev, "No vcc regulator found:
> > %ld\n",
> > + PTR_ERR(dw9714_dev->vcc));
> > + dw9714_dev->vcc = NULL;
> > + }
> > +
> > + if (dw9714_dev->vcc) {
>
> With (dummy) regulators, these checks become unnecessary.
>
> > + rval = regulator_enable(dw9714_dev->vcc);
> > + if (rval < 0) {
> > + dev_err(&client->dev, "failed to enable
> > vcc: %d\n", rval);
> > + return rval;
> > + }
> > + }
> > +
> > v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops);
> > dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> > V4L2_SUBDEV_FL_HAS_EVENTS;
> > @@ -200,6 +217,9 @@ static int __maybe_unused
> > dw9714_vcm_suspend(struct device *dev)
> > struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> > int ret, val;
> >
> > + if (pm_runtime_suspended(&client->dev))
> > + return 0;
>
> This can't take place in a runtime PM suspend callback. You'll need
> to add
> system suspend callback for this.
but this function is both the system and runtime suspend callback.
doesn't splitting up the callbacks just add lines of code
unnecessarily?
>
> > +
> > for (val = dw9714_dev->current_val & ~(DW9714_CTRL_STEPS -
> > 1);
> > val >= 0; val -= DW9714_CTRL_STEPS) {
> > ret = dw9714_i2c_write(client,
> > @@ -208,6 +228,13 @@ static int __maybe_unused
> > dw9714_vcm_suspend(struct device *dev)
> > dev_err_once(dev, "%s I2C failure: %d",
> > __func__, ret);
> > usleep_range(DW9714_CTRL_DELAY_US,
> > DW9714_CTRL_DELAY_US + 10);
> > }
> > +
> > + if (dw9714_dev->vcc) {
> > + ret = regulator_disable(dw9714_dev->vcc);
> > + if (ret)
> > + dev_err(dev, "Failed to disable vcc: %d\n",
> > ret);
> > + }
> > +
> > return 0;
> > }
> >
> > @@ -224,6 +251,18 @@ static int __maybe_unused
> > dw9714_vcm_resume(struct device *dev)
> > struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> > int ret, val;
> >
> > + if (pm_runtime_suspended(&client->dev))
>
> Same for this one.
>
> > + return 0;
> > +
> > + if (dw9714_dev->vcc) {
> > + ret = regulator_enable(dw9714_dev->vcc);
> > + if (ret) {
> > + dev_err(dev, "Failed to enable vcc: %d\n",
> > ret);
> > + return ret;
> > + }
> > + usleep_range(1000, 2000);
> > + }
> > +
> > for (val = dw9714_dev->current_val % DW9714_CTRL_STEPS;
> > val < dw9714_dev->current_val + DW9714_CTRL_STEPS - 1;
> > val += DW9714_CTRL_STEPS) {
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v2] media: i2c: dw9714: add optional regulator support
2021-11-26 11:06 ` Martin Kepplinger
@ 2021-11-26 12:28 ` Sakari Ailus
0 siblings, 0 replies; 5+ messages in thread
From: Sakari Ailus @ 2021-11-26 12:28 UTC (permalink / raw)
To: Martin Kepplinger
Cc: mchehab, broonie, kernel, linux-kernel, linux-media, linux-pm,
Angus Ainslie
On Fri, Nov 26, 2021 at 12:06:03PM +0100, Martin Kepplinger wrote:
> Am Freitag, dem 26.11.2021 um 12:44 +0200 schrieb Sakari Ailus:
> > Hi Martin,
> >
> > On Fri, Nov 26, 2021 at 10:01:07AM +0100, Martin Kepplinger wrote:
> > > From: Angus Ainslie <angus@akkea.ca>
> > >
> > > Allow the dw9714 to control a regulator and adjust suspend() and
> > > resume()
> > > to support both runtime and system pm.
> > >
> > > Signed-off-by: Angus Ainslie <angus@akkea.ca>
> > > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> > > ---
> > >
> > > revision history
> > > ----------------
> > >
> > > v2: (thank you Mark)
> > > * simplify the regulator_get_optional() error path
> > > * fix regulator usage during probe()
> > >
> > > v1:
> > > https://lore.kernel.org/linux-media/20211125080922.978583-1-martin.kepplinger@puri.sm/
> > >
> > >
> > >
> > > drivers/media/i2c/dw9714.c | 39
> > > ++++++++++++++++++++++++++++++++++++++
> > > 1 file changed, 39 insertions(+)
> > >
> > > diff --git a/drivers/media/i2c/dw9714.c
> > > b/drivers/media/i2c/dw9714.c
> > > index 3863dfeb8293..e8cc19b89861 100644
> > > --- a/drivers/media/i2c/dw9714.c
> > > +++ b/drivers/media/i2c/dw9714.c
> > > @@ -5,6 +5,7 @@
> > > #include <linux/i2c.h>
> > > #include <linux/module.h>
> > > #include <linux/pm_runtime.h>
> > > +#include <linux/regulator/consumer.h>
> > > #include <media/v4l2-ctrls.h>
> > > #include <media/v4l2-device.h>
> > > #include <media/v4l2-event.h>
> > > @@ -36,6 +37,7 @@ struct dw9714_device {
> > > struct v4l2_ctrl_handler ctrls_vcm;
> > > struct v4l2_subdev sd;
> > > u16 current_val;
> > > + struct regulator *vcc;
> > > };
> > >
> > > static inline struct dw9714_device *to_dw9714_vcm(struct v4l2_ctrl
> > > *ctrl)
> > > @@ -145,6 +147,21 @@ static int dw9714_probe(struct i2c_client
> > > *client)
> > > if (dw9714_dev == NULL)
> > > return -ENOMEM;
> > >
> > > + dw9714_dev->vcc = devm_regulator_get_optional(&client->dev,
> > > "vcc");
> >
> > You you used regular devm_regulator_get(), you could remove the error
> > handling below. If there's no regulator, you'll simply get a dummy
> > one.
>
> ok thanks
>
>
> >
> > > + if (IS_ERR(dw9714_dev->vcc)) {
> > > + dev_dbg(&client->dev, "No vcc regulator found:
> > > %ld\n",
> > > + PTR_ERR(dw9714_dev->vcc));
> > > + dw9714_dev->vcc = NULL;
> > > + }
> > > +
> > > + if (dw9714_dev->vcc) {
> >
> > With (dummy) regulators, these checks become unnecessary.
> >
> > > + rval = regulator_enable(dw9714_dev->vcc);
> > > + if (rval < 0) {
> > > + dev_err(&client->dev, "failed to enable
> > > vcc: %d\n", rval);
> > > + return rval;
> > > + }
> > > + }
> > > +
> > > v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops);
> > > dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> > > V4L2_SUBDEV_FL_HAS_EVENTS;
> > > @@ -200,6 +217,9 @@ static int __maybe_unused
> > > dw9714_vcm_suspend(struct device *dev)
> > > struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> > > int ret, val;
> > >
> > > + if (pm_runtime_suspended(&client->dev))
> > > + return 0;
> >
> > This can't take place in a runtime PM suspend callback. You'll need
> > to add
> > system suspend callback for this.
>
> but this function is both the system and runtime suspend callback.
> doesn't splitting up the callbacks just add lines of code
> unnecessarily?
Hmm. After thinking about this a little, I think this could indeed work.
Yeah, please leave it as-is.
>
> >
> > > +
> > > for (val = dw9714_dev->current_val & ~(DW9714_CTRL_STEPS -
> > > 1);
> > > val >= 0; val -= DW9714_CTRL_STEPS) {
> > > ret = dw9714_i2c_write(client,
> > > @@ -208,6 +228,13 @@ static int __maybe_unused
> > > dw9714_vcm_suspend(struct device *dev)
> > > dev_err_once(dev, "%s I2C failure: %d",
> > > __func__, ret);
> > > usleep_range(DW9714_CTRL_DELAY_US,
> > > DW9714_CTRL_DELAY_US + 10);
> > > }
> > > +
> > > + if (dw9714_dev->vcc) {
> > > + ret = regulator_disable(dw9714_dev->vcc);
> > > + if (ret)
> > > + dev_err(dev, "Failed to disable vcc: %d\n",
> > > ret);
> > > + }
> > > +
> > > return 0;
> > > }
> > >
> > > @@ -224,6 +251,18 @@ static int __maybe_unused
> > > dw9714_vcm_resume(struct device *dev)
> > > struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> > > int ret, val;
> > >
> > > + if (pm_runtime_suspended(&client->dev))
> >
> > Same for this one.
> >
> > > + return 0;
> > > +
> > > + if (dw9714_dev->vcc) {
> > > + ret = regulator_enable(dw9714_dev->vcc);
> > > + if (ret) {
> > > + dev_err(dev, "Failed to enable vcc: %d\n",
> > > ret);
> > > + return ret;
> > > + }
> > > + usleep_range(1000, 2000);
> > > + }
> > > +
> > > for (val = dw9714_dev->current_val % DW9714_CTRL_STEPS;
> > > val < dw9714_dev->current_val + DW9714_CTRL_STEPS - 1;
> > > val += DW9714_CTRL_STEPS) {
> >
>
>
--
Sakari Ailus
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] media: i2c: dw9714: add optional regulator support
2021-11-26 9:01 [PATCH v2] media: i2c: dw9714: add optional regulator support Martin Kepplinger
2021-11-26 10:44 ` Sakari Ailus
@ 2021-11-26 13:05 ` Mark Brown
1 sibling, 0 replies; 5+ messages in thread
From: Mark Brown @ 2021-11-26 13:05 UTC (permalink / raw)
To: Martin Kepplinger
Cc: mchehab, sakari.ailus, kernel, linux-kernel, linux-media,
linux-pm, Angus Ainslie
[-- Attachment #1: Type: text/plain, Size: 500 bytes --]
On Fri, Nov 26, 2021 at 10:01:07AM +0100, Martin Kepplinger wrote:
> + dw9714_dev->vcc = devm_regulator_get_optional(&client->dev, "vcc");
> + if (IS_ERR(dw9714_dev->vcc)) {
> + dev_dbg(&client->dev, "No vcc regulator found: %ld\n",
> + PTR_ERR(dw9714_dev->vcc));
> + dw9714_dev->vcc = NULL;
> + }
To repeat my original feedback: unless the supply can be physically
absent you should use regulator_get(). The _optional variants are only
for cases where the supply might be physically absent.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-11-26 13:07 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-26 9:01 [PATCH v2] media: i2c: dw9714: add optional regulator support Martin Kepplinger
2021-11-26 10:44 ` Sakari Ailus
2021-11-26 11:06 ` Martin Kepplinger
2021-11-26 12:28 ` Sakari Ailus
2021-11-26 13:05 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).