linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Conley Lee <conleylee@foxmail.com>
Cc: davem@davemloft.net, kuba@kernel.org, mripard@kernel.org,
	wens@csie.org, netdev@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] net: ethernet: sun4i-emac: replace magic number with macro
Date: Mon, 10 Jan 2022 14:56:35 +0100	[thread overview]
Message-ID: <Ydw7EzPvwArW/siQ@Red> (raw)
In-Reply-To: <tencent_AEEE0573A5455BBE4D5C05226C6C1E3AEF08@qq.com>

Le Mon, Jan 10, 2022 at 07:35:49PM +0800, Conley Lee a écrit :
> This patch remove magic numbers in sun4i-emac.c and replace with macros
> defined in sun4i-emac.h
> 
> Change since v1
> ---------------
> - reformat
> - merge commits
> - add commit message
> 
> Signed-off-by: Conley Lee <conleylee@foxmail.com>
> ---
>  drivers/net/ethernet/allwinner/sun4i-emac.c | 30 ++++++++++++---------
>  drivers/net/ethernet/allwinner/sun4i-emac.h | 18 +++++++++++++
>  2 files changed, 35 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
> index 849de4564709..98fd98feb439 100644
> --- a/drivers/net/ethernet/allwinner/sun4i-emac.c
> +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
> @@ -106,9 +106,9 @@ static void emac_update_speed(struct net_device *dev)
>  
>  	/* set EMAC SPEED, depend on PHY  */
>  	reg_val = readl(db->membase + EMAC_MAC_SUPP_REG);
> -	reg_val &= ~(0x1 << 8);
> +	reg_val &= ~EMAC_MAC_SUPP_100M;
>  	if (db->speed == SPEED_100)
> -		reg_val |= 1 << 8;
> +		reg_val |= EMAC_MAC_SUPP_100M;
>  	writel(reg_val, db->membase + EMAC_MAC_SUPP_REG);
>  }
>  
> @@ -264,7 +264,7 @@ static void emac_dma_done_callback(void *arg)
>  
>  	/* re enable interrupt */
>  	reg_val = readl(db->membase + EMAC_INT_CTL_REG);
> -	reg_val |= (0x01 << 8);
> +	reg_val |= EMAC_INT_CTL_RX_EN;
>  	writel(reg_val, db->membase + EMAC_INT_CTL_REG);
>  
>  	db->emacrx_completed_flag = 1;
> @@ -429,7 +429,7 @@ static unsigned int emac_powerup(struct net_device *ndev)
>  	/* initial EMAC */
>  	/* flush RX FIFO */
>  	reg_val = readl(db->membase + EMAC_RX_CTL_REG);
> -	reg_val |= 0x8;
> +	reg_val |= EMAC_RX_CTL_FLUSH_FIFO;
>  	writel(reg_val, db->membase + EMAC_RX_CTL_REG);
>  	udelay(1);
>  
> @@ -441,8 +441,8 @@ static unsigned int emac_powerup(struct net_device *ndev)
>  
>  	/* set MII clock */
>  	reg_val = readl(db->membase + EMAC_MAC_MCFG_REG);
> -	reg_val &= (~(0xf << 2));
> -	reg_val |= (0xD << 2);
> +	reg_val &= ~EMAC_MAC_MCFG_MII_CLKD_MASK;
> +	reg_val |= EMAC_MAC_MCFG_MII_CLKD_72;
>  	writel(reg_val, db->membase + EMAC_MAC_MCFG_REG);
>  
>  	/* clear RX counter */
> @@ -506,7 +506,7 @@ static void emac_init_device(struct net_device *dev)
>  
>  	/* enable RX/TX0/RX Hlevel interrup */
>  	reg_val = readl(db->membase + EMAC_INT_CTL_REG);
> -	reg_val |= (0xf << 0) | (0x01 << 8);
> +	reg_val |= (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN | EMAC_INT_CTL_RX_EN);
>  	writel(reg_val, db->membase + EMAC_INT_CTL_REG);
>  
>  	spin_unlock_irqrestore(&db->lock, flags);
> @@ -637,7 +637,9 @@ static void emac_rx(struct net_device *dev)
>  		if (!rxcount) {
>  			db->emacrx_completed_flag = 1;
>  			reg_val = readl(db->membase + EMAC_INT_CTL_REG);
> -			reg_val |= (0xf << 0) | (0x01 << 8);
> +			reg_val |=
> +				(EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN |
> +				 EMAC_INT_CTL_RX_EN);
>  			writel(reg_val, db->membase + EMAC_INT_CTL_REG);
>  
>  			/* had one stuck? */
> @@ -669,7 +671,9 @@ static void emac_rx(struct net_device *dev)
>  			writel(reg_val | EMAC_CTL_RX_EN,
>  			       db->membase + EMAC_CTL_REG);
>  			reg_val = readl(db->membase + EMAC_INT_CTL_REG);
> -			reg_val |= (0xf << 0) | (0x01 << 8);
> +			reg_val |=
> +				(EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN |
> +				 EMAC_INT_CTL_RX_EN);
>  			writel(reg_val, db->membase + EMAC_INT_CTL_REG);
>  
>  			db->emacrx_completed_flag = 1;
> @@ -783,20 +787,20 @@ static irqreturn_t emac_interrupt(int irq, void *dev_id)
>  	}
>  
>  	/* Transmit Interrupt check */
> -	if (int_status & (0x01 | 0x02))
> +	if (int_status & EMAC_INT_STA_TX_COMPLETE)
>  		emac_tx_done(dev, db, int_status);
>  
> -	if (int_status & (0x04 | 0x08))
> +	if (int_status & EMAC_INT_STA_TX_ABRT)
>  		netdev_info(dev, " ab : %x\n", int_status);
>  
>  	/* Re-enable interrupt mask */
>  	if (db->emacrx_completed_flag == 1) {
>  		reg_val = readl(db->membase + EMAC_INT_CTL_REG);
> -		reg_val |= (0xf << 0) | (0x01 << 8);
> +		reg_val |= (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN | EMAC_INT_CTL_RX_EN);
>  		writel(reg_val, db->membase + EMAC_INT_CTL_REG);
>  	} else {
>  		reg_val = readl(db->membase + EMAC_INT_CTL_REG);
> -		reg_val |= (0xf << 0);
> +		reg_val |= (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN);
>  		writel(reg_val, db->membase + EMAC_INT_CTL_REG);
>  	}
>  
> diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.h b/drivers/net/ethernet/allwinner/sun4i-emac.h
> index 38c72d9ec600..90bd9ad77607 100644
> --- a/drivers/net/ethernet/allwinner/sun4i-emac.h
> +++ b/drivers/net/ethernet/allwinner/sun4i-emac.h
> @@ -38,6 +38,7 @@
>  #define EMAC_RX_CTL_REG		(0x3c)
>  #define EMAC_RX_CTL_AUTO_DRQ_EN		(1 << 1)
>  #define EMAC_RX_CTL_DMA_EN		(1 << 2)
> +#define EMAC_RX_CTL_FLUSH_FIFO		(1 << 3)
>  #define EMAC_RX_CTL_PASS_ALL_EN		(1 << 4)
>  #define EMAC_RX_CTL_PASS_CTL_EN		(1 << 5)
>  #define EMAC_RX_CTL_PASS_CRC_ERR_EN	(1 << 6)
> @@ -61,7 +62,21 @@
>  #define EMAC_RX_IO_DATA_STATUS_OK	(1 << 7)
>  #define EMAC_RX_FBC_REG		(0x50)
>  #define EMAC_INT_CTL_REG	(0x54)
> +#define EMAC_INT_CTL_RX_EN	(1 << 8)
> +#define EMAC_INT_CTL_TX0_EN	(1)
> +#define EMAC_INT_CTL_TX1_EN	(1 << 1)
> +#define EMAC_INT_CTL_TX_EN	(EMAC_INT_CTL_TX0_EN | EMAC_INT_CTL_TX1_EN)
> +#define EMAC_INT_CTL_TX0_ABRT_EN	(0x1 << 2)
> +#define EMAC_INT_CTL_TX1_ABRT_EN	(0x1 << 3)
> +#define EMAC_INT_CTL_TX_ABRT_EN	(EMAC_INT_CTL_TX0_ABRT_EN | EMAC_INT_CTL_TX1_ABRT_EN)
>  #define EMAC_INT_STA_REG	(0x58)
> +#define EMAC_INT_STA_TX0_COMPLETE	(0x1)
> +#define EMAC_INT_STA_TX1_COMPLETE	(0x1 << 1)
> +#define EMAC_INT_STA_TX_COMPLETE	(EMAC_INT_STA_TX0_COMPLETE | EMAC_INT_STA_TX1_COMPLETE)
> +#define EMAC_INT_STA_TX0_ABRT	(0x1 << 2)
> +#define EMAC_INT_STA_TX1_ABRT	(0x1 << 3)
> +#define EMAC_INT_STA_TX_ABRT	(EMAC_INT_STA_TX0_ABRT | EMAC_INT_STA_TX1_ABRT)
> +#define EMAC_INT_STA_RX_COMPLETE	(0x1 << 8)

Hello

As proposed by checkpatch, I thing there are several place (like all EMAC_INT_STA) where you could use BIT(x) instead of (0xX << x)

Regards

  parent reply	other threads:[~2022-01-10 13:56 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-10  7:23 [PATCH 0/2] sun4i-emac: replace magic number with marcos conleylee
2022-01-10  8:32 ` Corentin Labbe
2022-01-10 11:35 ` [PATCH v2] net: ethernet: sun4i-emac: replace magic number with macro Conley Lee
2022-01-10 13:05   ` Leon Romanovsky
2022-01-10 14:42     ` Conley Lee
2022-01-10 13:31   ` Andrew Lunn
2022-01-10 14:40     ` Conley Lee
2022-01-10 13:56   ` Corentin Labbe [this message]
2022-01-10 17:28     ` Jakub Kicinski
2022-01-11  3:19     ` Conley Lee
2022-01-11  3:05 ` [PATCH v3] " Conley Lee
2022-01-11 16:32   ` Corentin Labbe
2022-01-12  6:16     ` Conley Lee
2022-01-12  4:40   ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Ydw7EzPvwArW/siQ@Red \
    --to=clabbe.montjoie@gmail.com \
    --cc=conleylee@foxmail.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mripard@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).