linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko@kernel.org>
To: Reinette Chatre <reinette.chatre@intel.com>
Cc: dave.hansen@linux.intel.com, tglx@linutronix.de, bp@alien8.de,
	luto@kernel.org, mingo@redhat.com, linux-sgx@vger.kernel.org,
	x86@kernel.org, seanjc@google.com, kai.huang@intel.com,
	cathy.zhang@intel.com, cedric.xing@intel.com,
	haitao.huang@intel.com, mark.shanahan@intel.com, hpa@zytor.com,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH V2 06/32] x86/sgx: Support VMA permissions more relaxed than enclave permissions
Date: Tue, 8 Mar 2022 11:12:54 +0200	[thread overview]
Message-ID: <YiceFtul/VsViuUu@iki.fi> (raw)
In-Reply-To: <YiccplUukAJ5SeFn@iki.fi>

On Tue, Mar 08, 2022 at 11:06:46AM +0200, Jarkko Sakkinen wrote:
> On Tue, Mar 08, 2022 at 10:14:42AM +0200, Jarkko Sakkinen wrote:
> > On Mon, Mar 07, 2022 at 09:36:36AM -0800, Reinette Chatre wrote:
> > > Hi Jarkko,
> > > 
> > > On 3/7/2022 9:10 AM, Jarkko Sakkinen wrote:
> > > > On Mon, Feb 07, 2022 at 04:45:28PM -0800, Reinette Chatre wrote:
> > > >> === Summary ===
> > > >>
> > > >> An SGX VMA can only be created if its permissions are the same or
> > > >> weaker than the Enclave Page Cache Map (EPCM) permissions. After VMA
> > > >> creation this same rule is again enforced by the page fault handler:
> > > >> faulted enclave pages are required to have equal or more relaxed
> > > >> EPCM permissions than the VMA permissions.
> > > >>
> > > >> On SGX1 systems the additional enforcement in the page fault handler
> > > >> is redundant and on SGX2 systems it incorrectly prevents access.
> > > >> On SGX1 systems it is unnecessary to repeat the enforcement of the
> > > >> permission rule. The rule used during original VMA creation will
> > > >> ensure that any access attempt will use correct permissions.
> > > >> With SGX2 the EPCM permissions of a page can change after VMA
> > > >> creation resulting in the VMA permissions potentially being more
> > > >> relaxed than the EPCM permissions and the page fault handler
> > > >> incorrectly blocking valid access attempts.
> > > >>
> > > >> Enable the VMA's pages to remain accessible while ensuring that
> > > >> the PTEs are installed to match the EPCM permissions but not be
> > > >> more relaxed than the VMA permissions.
> > > >>
> > > >> === Full Changelog ===
> > > >>
> > > >> An SGX enclave is an area of memory where parts of an application
> > > >> can reside. First an enclave is created and loaded (from
> > > >> non-enclave memory) with the code and data of an application,
> > > >> then user space can map (mmap()) the enclave memory to
> > > >> be able to enter the enclave at its defined entry points for
> > > >> execution within it.
> > > >>
> > > >> The hardware maintains a secure structure, the Enclave Page Cache Map
> > > >> (EPCM), that tracks the contents of the enclave. Of interest here is
> > > >> its tracking of the enclave page permissions. When a page is loaded
> > > >> into the enclave its permissions are specified and recorded in the
> > > >> EPCM. In parallel the kernel maintains permissions within the
> > > >> page table entries (PTEs) and the rule is that PTE permissions
> > > >> are not allowed to be more relaxed than the EPCM permissions.
> > > >>
> > > >> A new mapping (mmap()) of enclave memory can only succeed if the
> > > >> mapping has the same or weaker permissions than the permissions that
> > > >> were vetted during enclave creation. This is enforced by
> > > >> sgx_encl_may_map() that is called on the mmap() as well as mprotect()
> > > >> paths. This rule remains.
> > > >>
> > > >> One feature of SGX2 is to support the modification of EPCM permissions
> > > >> after enclave initialization. Enclave pages may thus already be part
> > > >> of a VMA at the time their EPCM permissions are changed resulting
> > > >> in the VMA's permissions potentially being more relaxed than the EPCM
> > > >> permissions.
> > > >>
> > > >> Allow permissions of existing VMAs to be more relaxed than EPCM
> > > >> permissions in preparation for dynamic EPCM permission changes
> > > >> made possible in SGX2.  New VMAs that attempt to have more relaxed
> > > >> permissions than EPCM permissions continue to be unsupported.
> > > >>
> > > >> Reasons why permissions of existing VMAs are allowed to be more relaxed
> > > >> than EPCM permissions instead of dynamically changing VMA permissions
> > > >> when EPCM permissions change are:
> > > >> 1) Changing VMA permissions involve splitting VMAs which is an
> > > >>    operation that can fail. Additionally changing EPCM permissions of
> > > >>    a range of pages could also fail on any of the pages involved.
> > > >>    Handling these error cases causes problems. For example, if an
> > > >>    EPCM permission change fails and the VMA has already been split
> > > >>    then it is not possible to undo the VMA split nor possible to
> > > >>    undo the EPCM permission changes that did succeed before the
> > > >>    failure.
> > > >> 2) The kernel has little insight into the user space where EPCM
> > > >>    permissions are controlled from. For example, a RW page may
> > > >>    be made RO just before it is made RX and splitting the VMAs
> > > >>    while the VMAs may change soon is unnecessary.
> > > >>
> > > >> Remove the extra permission check called on a page fault
> > > >> (vm_operations_struct->fault) or during debugging
> > > >> (vm_operations_struct->access) when loading the enclave page from swap
> > > >> that ensures that the VMA permissions are not more relaxed than the
> > > >> EPCM permissions. Since a VMA could only exist if it passed the
> > > >> original permission checks during mmap() and a VMA may indeed
> > > >> have more relaxed permissions than the EPCM permissions this extra
> > > >> permission check is no longer appropriate.
> > > >>
> > > >> With the permission check removed, ensure that PTEs do
> > > >> not blindly inherit the VMA permissions but instead the permissions
> > > >> that the VMA and EPCM agree on. PTEs for writable pages (from VMA
> > > >> and enclave perspective) are installed with the writable bit set,
> > > >> reducing the need for this additional flow to the permission mismatch
> > > >> cases handled next.
> > > >>
> > > >> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
> > > >> ---
> > > >> Changes since V1:
> > > >> - Reword commit message (Jarkko).
> > > >> - Use "relax" instead of "exceed" when referring to permissions (Dave).
> > > >> - Add snippet to Documentation/x86/sgx.rst that highlights the
> > > >>   relationship between VMA, EPCM, and PTE permissions on SGX
> > > >>   systems (Andy).
> > > >>
> > > >>  Documentation/x86/sgx.rst      | 10 +++++++++
> > > >>  arch/x86/kernel/cpu/sgx/encl.c | 38 ++++++++++++++++++----------------
> > > >>  2 files changed, 30 insertions(+), 18 deletions(-)
> > > >>
> > > >> diff --git a/Documentation/x86/sgx.rst b/Documentation/x86/sgx.rst
> > > >> index 89ff924b1480..5659932728a5 100644
> > > >> --- a/Documentation/x86/sgx.rst
> > > >> +++ b/Documentation/x86/sgx.rst
> > > >> @@ -99,6 +99,16 @@ The relationships between the different permission masks are:
> > > >>  * PTEs are installed to match the EPCM permissions, but not be more
> > > >>    relaxed than the VMA permissions.
> > > >>  
> > > >> +On systems supporting SGX2 EPCM permissions may change while the
> > > >> +enclave page belongs to a VMA without impacting the VMA permissions.
> > > >> +This means that a running VMA may appear to allow access to an enclave
> > > >> +page that is not allowed by its EPCM permissions. For example, when an
> > > >> +enclave page with RW EPCM permissions is mapped by a RW VMA but is
> > > >> +subsequently changed to have read-only EPCM permissions. The kernel
> > > >> +continues to maintain correct access to the enclave page through the
> > > >> +PTE that will ensure that only access allowed by both the VMA
> > > >> +and EPCM permissions are permitted.
> > > >> +
> > > >>  Application interface
> > > >>  =====================
> > > >>  
> > > >> diff --git a/arch/x86/kernel/cpu/sgx/encl.c b/arch/x86/kernel/cpu/sgx/encl.c
> > > >> index 48afe96ae0f0..b6105d9e7c46 100644
> > > >> --- a/arch/x86/kernel/cpu/sgx/encl.c
> > > >> +++ b/arch/x86/kernel/cpu/sgx/encl.c
> > > >> @@ -91,10 +91,8 @@ static struct sgx_epc_page *sgx_encl_eldu(struct sgx_encl_page *encl_page,
> > > >>  }
> > > >>  
> > > >>  static struct sgx_encl_page *sgx_encl_load_page(struct sgx_encl *encl,
> > > >> -						unsigned long addr,
> > > >> -						unsigned long vm_flags)
> > > >> +						unsigned long addr)
> > > >>  {
> > > >> -	unsigned long vm_prot_bits = vm_flags & (VM_READ | VM_WRITE | VM_EXEC);
> > > >>  	struct sgx_epc_page *epc_page;
> > > >>  	struct sgx_encl_page *entry;
> > > >>  
> > > >> @@ -102,14 +100,6 @@ static struct sgx_encl_page *sgx_encl_load_page(struct sgx_encl *encl,
> > > >>  	if (!entry)
> > > >>  		return ERR_PTR(-EFAULT);
> > > >>  
> > > >> -	/*
> > > >> -	 * Verify that the faulted page has equal or higher build time
> > > >> -	 * permissions than the VMA permissions (i.e. the subset of {VM_READ,
> > > >> -	 * VM_WRITE, VM_EXECUTE} in vma->vm_flags).
> > > >> -	 */
> > > >> -	if ((entry->vm_max_prot_bits & vm_prot_bits) != vm_prot_bits)
> > > >> -		return ERR_PTR(-EFAULT);
> > > >> -
> > > >>  	/* Entry successfully located. */
> > > >>  	if (entry->epc_page) {
> > > >>  		if (entry->desc & SGX_ENCL_PAGE_BEING_RECLAIMED)
> > > >> @@ -138,7 +128,9 @@ static vm_fault_t sgx_vma_fault(struct vm_fault *vmf)
> > > >>  {
> > > >>  	unsigned long addr = (unsigned long)vmf->address;
> > > >>  	struct vm_area_struct *vma = vmf->vma;
> > > >> +	unsigned long page_prot_bits;
> > > >>  	struct sgx_encl_page *entry;
> > > >> +	unsigned long vm_prot_bits;
> > > >>  	unsigned long phys_addr;
> > > >>  	struct sgx_encl *encl;
> > > >>  	vm_fault_t ret;
> > > >> @@ -155,7 +147,7 @@ static vm_fault_t sgx_vma_fault(struct vm_fault *vmf)
> > > >>  
> > > >>  	mutex_lock(&encl->lock);
> > > >>  
> > > >> -	entry = sgx_encl_load_page(encl, addr, vma->vm_flags);
> > > >> +	entry = sgx_encl_load_page(encl, addr);
> > > >>  	if (IS_ERR(entry)) {
> > > >>  		mutex_unlock(&encl->lock);
> > > >   
> > > >> @@ -167,7 +159,19 @@ static vm_fault_t sgx_vma_fault(struct vm_fault *vmf)
> > > >>  
> > > >>  	phys_addr = sgx_get_epc_phys_addr(entry->epc_page);
> > > >>  
> > > >> -	ret = vmf_insert_pfn(vma, addr, PFN_DOWN(phys_addr));
> > > >> +	/*
> > > >> +	 * Insert PTE to match the EPCM page permissions ensured to not
> > > >> +	 * exceed the VMA permissions.
> > > >> +	 */
> > > >> +	vm_prot_bits = vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC);
> > > >> +	page_prot_bits = entry->vm_max_prot_bits & vm_prot_bits;
> > > >> +	/*
> > > >> +	 * Add VM_SHARED so that PTE is made writable right away if VMA
> > > >> +	 * and EPCM are writable (no COW in SGX).
> > > >> +	 */
> > > >> +	page_prot_bits |= (vma->vm_flags & VM_SHARED);
> > > >> +	ret = vmf_insert_pfn_prot(vma, addr, PFN_DOWN(phys_addr),
> > > >> +				  vm_get_page_prot(page_prot_bits));
> > > >>  	if (ret != VM_FAULT_NOPAGE) {
> > > >>  		mutex_unlock(&encl->lock);
> > > >>  
> > > >> @@ -295,15 +299,14 @@ static int sgx_encl_debug_write(struct sgx_encl *encl, struct sgx_encl_page *pag
> > > >>   * Load an enclave page to EPC if required, and take encl->lock.
> > > >>   */
> > > >>  static struct sgx_encl_page *sgx_encl_reserve_page(struct sgx_encl *encl,
> > > >> -						   unsigned long addr,
> > > >> -						   unsigned long vm_flags)
> > > >> +						   unsigned long addr)
> > > >>  {
> > > >>  	struct sgx_encl_page *entry;
> > > >>  
> > > >>  	for ( ; ; ) {
> > > >>  		mutex_lock(&encl->lock);
> > > >>  
> > > >> -		entry = sgx_encl_load_page(encl, addr, vm_flags);
> > > >> +		entry = sgx_encl_load_page(encl, addr);
> > > >>  		if (PTR_ERR(entry) != -EBUSY)
> > > >>  			break;
> > > >>  
> > > >> @@ -339,8 +342,7 @@ static int sgx_vma_access(struct vm_area_struct *vma, unsigned long addr,
> > > >>  		return -EFAULT;
> > > >>  
> > > >>  	for (i = 0; i < len; i += cnt) {
> > > >> -		entry = sgx_encl_reserve_page(encl, (addr + i) & PAGE_MASK,
> > > >> -					      vma->vm_flags);
> > > >> +		entry = sgx_encl_reserve_page(encl, (addr + i) & PAGE_MASK);
> > > >>  		if (IS_ERR(entry)) {
> > > >>  			ret = PTR_ERR(entry);
> > > >>  			break;
> > > >> -- 
> > > >> 2.25.1
> > > >>
> > > > 
> > > > If you unconditionally set vm_max_prot_bits to RWX for dynamically created
> > > > pags, you would not need to do this.
> > > > 
> > > > These patches could be then safely dropped then:
> > > > 
> > > > - [PATCH V2 06/32] x86/sgx: Support VMA permissions more relaxed than enclave permissions 
> > > > - [PATCH V2 08/32] x86/sgx: x86/sgx: Add sgx_encl_page->vm_run_prot_bits for dynamic permission changes
> > > > - [PATCH V2 15/32] x86/sgx: Support relaxing of enclave page permissions
> > > > 
> > > > And that would also keep full ABI compatibility without exceptions to the
> > > > existing mainline code.
> > > > 
> > > 
> > > Dropping these changes do not just impact dynamically created pages. Dropping
> > > these patches would result in EPCM page permission restriction being supported
> > > for all pages, those added before enclave initialization as well as dynamically
> > > added pages, but their PTEs will not be impacted.
> > > 
> > > For example, if a RW enclave page is added via SGX_IOC_ENCLAVE_ADD_PAGES and
> > > then later made read-only via SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS then Linux
> > > would keep allowing and installing RW PTEs to this page.
> > 
> > I think that would be perfectly fine, if someone wants to do that. There is
> > no corrateral damage on doing that. Kernel does not get messed because of
> > that. It's a use case that does not make sense in the first place, so it'd
> > be stupid to build anything extensive around it to the kernel.
> > 
> > Shooting yourself to the foot is something that kernel does and should not
> > protect user space from unless there is a risk of messing the state of the
> > kernel itself.
> > 
> > Much worse is that we have e.g. completely artificial ioctl
> > SGX_IOC_ENCLAVE_RELAX_PERMISSIONS to support this scheme, which could e.g.
> > cause extra roundtrips for simple EMODPE.
> > 
> > Also this means not having to include 06/32, which keeps 100% backwards
> > compatibility in run-time behaviour to the mainline while not restricting
> > at all dynamically created pages. And we get rid of complex book keeping
> > of vm_run_prot_bits.
> > 
> > And generally the whole model is then very easy to understand and explain.
> > If I had to keep presentation of the current mess in the patch set in a
> > conference, I can honestly say that I would be in serious trouble. It's
> > not clean and clear security model, which is a risk by itself.
> 
> I.e.
> 
> 1. For EADD'd pages: stick what has been the invariant 1,5 years now. Do
>    not change it by any means (e.g. 06/32).
> 2. For EAUG'd pages: set vm_max_prot_bits RWX, which essentially means do
>    what ever you want with PTE's and EPCM.
> 
> It's a clear and understandable model that does nothing bad to the kernel,
> and a run-time developer can surely find away to get things on going. For
> user space, the most important thing is the clarity in kernel behaviour,
> and this does deliver that clarity. It's not perfect but it does do the
> job and anyone can get it.

Also a quantitive argument for this is that by simplifying security model
this way it is one ioctl less, which must be considered as +1. We do not
want to add new ioctls unless it is something we absolutely cannnot live
without. We absolutely can live without SGX_IOC_ENCLAVE_RELAX_PERMISSIONS.

BR, Jarkko

  reply	other threads:[~2022-03-08  9:13 UTC|newest]

Thread overview: 130+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-08  0:45 [PATCH V2 00/32] x86/sgx and selftests/sgx: Support SGX2 Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 01/32] x86/sgx: Add short descriptions to ENCLS wrappers Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 02/32] x86/sgx: Add wrapper for SGX2 EMODPR function Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 03/32] x86/sgx: Add wrapper for SGX2 EMODT function Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 04/32] x86/sgx: Add wrapper for SGX2 EAUG function Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 05/32] Documentation/x86: Document SGX permission details Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 06/32] x86/sgx: Support VMA permissions more relaxed than enclave permissions Reinette Chatre
2022-03-07 17:10   ` Jarkko Sakkinen
2022-03-07 17:36     ` Reinette Chatre
2022-03-08  8:14       ` Jarkko Sakkinen
2022-03-08  9:06         ` Jarkko Sakkinen
2022-03-08  9:12           ` Jarkko Sakkinen [this message]
2022-03-08 16:04             ` Reinette Chatre
2022-03-08 17:00               ` Jarkko Sakkinen
2022-03-08 17:49                 ` Reinette Chatre
2022-03-08 18:46                   ` Jarkko Sakkinen
2022-03-11 11:06                 ` Dr. Greg
2022-02-08  0:45 ` [PATCH V2 07/32] x86/sgx: Add pfn_mkwrite() handler for present PTEs Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 08/32] x86/sgx: x86/sgx: Add sgx_encl_page->vm_run_prot_bits for dynamic permission changes Reinette Chatre
2022-03-04  8:55   ` Jarkko Sakkinen
2022-03-04 19:19     ` Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 09/32] x86/sgx: Export sgx_encl_ewb_cpumask() Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 10/32] x86/sgx: Rename sgx_encl_ewb_cpumask() as sgx_encl_cpumask() Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 11/32] x86/sgx: Move PTE zap code to new sgx_zap_enclave_ptes() Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 12/32] x86/sgx: Make sgx_ipi_cb() available internally Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 13/32] x86/sgx: Create utility to validate user provided offset and length Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 14/32] x86/sgx: Keep record of SGX page type Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 15/32] x86/sgx: Support relaxing of enclave page permissions Reinette Chatre
2022-03-04  8:59   ` Jarkko Sakkinen
2022-02-08  0:45 ` [PATCH V2 16/32] x86/sgx: Support restricting " Reinette Chatre
2022-02-21  0:49   ` Jarkko Sakkinen
2022-02-22 18:35     ` Reinette Chatre
2022-02-23 15:46       ` Jarkko Sakkinen
2022-02-23 19:55         ` Reinette Chatre
2022-02-28 12:27           ` Jarkko Sakkinen
2022-02-23 19:21     ` Dhanraj, Vijay
2022-02-23 22:42       ` Reinette Chatre
2022-02-28 12:24       ` Jarkko Sakkinen
2022-02-28 13:19         ` Jarkko Sakkinen
2022-02-28 15:16         ` Dave Hansen
2022-02-28 17:44           ` Dhanraj, Vijay
2022-03-01 13:26           ` Jarkko Sakkinen
2022-03-01 13:42             ` Jarkko Sakkinen
2022-03-01 17:48               ` Reinette Chatre
2022-03-02  2:05                 ` Jarkko Sakkinen
2022-03-02  2:11                   ` Jarkko Sakkinen
2022-03-02  4:03                     ` Jarkko Sakkinen
2022-03-02 22:57                   ` Reinette Chatre
2022-03-03 16:08                     ` Haitao Huang
2022-03-03 21:23                       ` Reinette Chatre
2022-03-03 21:44                         ` Dave Hansen
2022-03-05  3:19                           ` Jarkko Sakkinen
2022-03-06  0:15                             ` Jarkko Sakkinen
2022-03-06  0:25                               ` Jarkko Sakkinen
2022-03-10  5:43                           ` Jarkko Sakkinen
2022-03-10  5:59                             ` Jarkko Sakkinen
2022-03-03 23:18                       ` Jarkko Sakkinen
2022-03-04  4:03                         ` Haitao Huang
2022-03-04  8:30                           ` Jarkko Sakkinen
2022-03-04 15:51                             ` Haitao Huang
2022-03-05  1:02                               ` Jarkko Sakkinen
2022-03-06 14:24                                 ` Haitao Huang
2022-03-03 23:12                     ` Jarkko Sakkinen
2022-03-04  0:48                       ` Reinette Chatre
2022-03-10  6:10       ` Jarkko Sakkinen
2022-03-10 18:33         ` Haitao Huang
2022-03-11 12:10           ` Jarkko Sakkinen
2022-03-11 12:16             ` Jarkko Sakkinen
2022-03-11 12:33               ` Jarkko Sakkinen
2022-03-11 17:53               ` Reinette Chatre
2022-03-11 18:11                 ` Jarkko Sakkinen
2022-03-11 19:28                   ` Reinette Chatre
2022-03-14  3:42                     ` Jarkko Sakkinen
2022-03-14  3:45                       ` Jarkko Sakkinen
2022-03-14  3:54                         ` Jarkko Sakkinen
2022-03-14 15:32                       ` Reinette Chatre
2022-03-17  4:30                         ` Jarkko Sakkinen
2022-03-17 22:08                           ` Reinette Chatre
2022-03-17 22:51                             ` Jarkko Sakkinen
2022-03-18  0:11                               ` Reinette Chatre
2022-03-20  0:24                                 ` Jarkko Sakkinen
2022-03-28 23:22                                   ` Reinette Chatre
2022-03-30 15:00                                     ` Jarkko Sakkinen
2022-03-30 15:02                                       ` Jarkko Sakkinen
2022-03-14  2:49                 ` Jarkko Sakkinen
2022-03-14  2:50                   ` Jarkko Sakkinen
2022-03-14  2:58                     ` Jarkko Sakkinen
2022-03-14 15:39                       ` Haitao Huang
2022-03-17  4:34                         ` Jarkko Sakkinen
2022-03-17 14:42                           ` Haitao Huang
2022-03-17  4:37                         ` Jarkko Sakkinen
2022-03-17 14:47                           ` Haitao Huang
2022-03-17  7:01                         ` Jarkko Sakkinen
2022-03-17  7:11                           ` Jarkko Sakkinen
2022-03-17 14:28                             ` Haitao Huang
2022-03-17 21:50                               ` Jarkko Sakkinen
2022-03-17 22:00                                 ` Jarkko Sakkinen
2022-03-17 22:23                                   ` Jarkko Sakkinen
2022-02-08  0:45 ` [PATCH V2 17/32] selftests/sgx: Add test for EPCM permission changes Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 18/32] selftests/sgx: Add test for TCS page " Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 19/32] x86/sgx: Support adding of pages to an initialized enclave Reinette Chatre
2022-02-19 11:57   ` Jarkko Sakkinen
2022-02-19 12:01     ` Jarkko Sakkinen
2022-02-20 18:40       ` Jarkko Sakkinen
2022-02-22 19:19         ` Reinette Chatre
2022-02-23 15:46           ` Jarkko Sakkinen
2022-03-07 16:16   ` Jarkko Sakkinen
2022-02-08  0:45 ` [PATCH V2 20/32] x86/sgx: Tighten accessible memory range after enclave initialization Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 21/32] selftests/sgx: Test two different SGX2 EAUG flows Reinette Chatre
2022-03-07 16:39   ` Jarkko Sakkinen
2022-02-08  0:45 ` [PATCH V2 22/32] x86/sgx: Support modifying SGX page type Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 23/32] x86/sgx: Support complete page removal Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 24/32] Documentation/x86: Introduce enclave runtime management section Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 25/32] selftests/sgx: Introduce dynamic entry point Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 26/32] selftests/sgx: Introduce TCS initialization enclave operation Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 27/32] selftests/sgx: Test complete changing of page type flow Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 28/32] selftests/sgx: Test faulty enclave behavior Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 29/32] selftests/sgx: Test invalid access to removed enclave page Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 30/32] selftests/sgx: Test reclaiming of untouched page Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 31/32] x86/sgx: Free up EPC pages directly to support large page ranges Reinette Chatre
2022-02-08  0:45 ` [PATCH V2 32/32] selftests/sgx: Page removal stress test Reinette Chatre
2022-02-22 20:27 ` [PATCH V2 00/32] x86/sgx and selftests/sgx: Support SGX2 Nathaniel McCallum
2022-02-22 22:39   ` Reinette Chatre
2022-02-23 13:24     ` Nathaniel McCallum
2022-02-23 18:25       ` Reinette Chatre
2022-03-02 16:57         ` Nathaniel McCallum
2022-03-02 21:20           ` Reinette Chatre
2022-03-03  1:13             ` Nathaniel McCallum
2022-03-03 17:49               ` Reinette Chatre
2022-03-04  0:57               ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YiceFtul/VsViuUu@iki.fi \
    --to=jarkko@kernel.org \
    --cc=bp@alien8.de \
    --cc=cathy.zhang@intel.com \
    --cc=cedric.xing@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=haitao.huang@intel.com \
    --cc=hpa@zytor.com \
    --cc=kai.huang@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sgx@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=mark.shanahan@intel.com \
    --cc=mingo@redhat.com \
    --cc=reinette.chatre@intel.com \
    --cc=seanjc@google.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).