Re: [RFT] ufs: qcom: drop custom Android boot parameters

From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Avri Altman <avri.altman@wdc.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	linux-arm-msm@vger.kernel.org, linux-scsi@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Luca Weiss <luca.weiss@fairphone.com>
Subject: Re: [RFT] ufs: qcom: drop custom Android boot parameters
Date: Mon, 21 Mar 2022 09:16:27 -0500	[thread overview]
Message-ID: <YjiIu7BGP4fG13ct@builder.lan> (raw)
In-Reply-To: <20220320110616.18355-1-krzk@kernel.org>

On Sun 20 Mar 06:06 CDT 2022, Krzysztof Kozlowski wrote:

> The QCOM UFS driver requires an androidboot.bootdevice command line
> argument matching the UFS device name.  If the name is different, it
> refuses to probe.  Thise androidboot.bootdevice is provided by
> stock/vendor (from an Android-based device) bootloader.
> 
> This does not make sense from Linux point of view.  Driver should be
> able to boot regardless of bootloader.  Driver should not depend on some
> Android custom environment data.
> 
> Cc: Luca Weiss <luca.weiss@fairphone.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
> 
> Not tested, please kindly provide tests.
> 
> See also:
> https://lore.kernel.org/linux-devicetree/f61abc2b-3ce8-7b1f-3d28-8a4a03ec58eb@kernel.org/T/#u
> ---
>  drivers/scsi/ufs/ufs-qcom.c | 15 ---------------
>  1 file changed, 15 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index 0d2e950d0865..586c0e567ff9 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -957,18 +957,6 @@ static const struct reset_control_ops ufs_qcom_reset_ops = {
>  	.deassert = ufs_qcom_reset_deassert,
>  };
>  
> -#define	ANDROID_BOOT_DEV_MAX	30
> -static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
> -
> -#ifndef MODULE
> -static int __init get_android_boot_dev(char *str)
> -{
> -	strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX);
> -	return 1;
> -}
> -__setup("androidboot.bootdevice=", get_android_boot_dev);
> -#endif
> -
>  /**
>   * ufs_qcom_init - bind phy with controller
>   * @hba: host controller instance
> @@ -988,9 +976,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
>  	struct resource *res;
>  	struct ufs_clk_info *clki;
>  
> -	if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev)))
> -		return -ENODEV;
> -
>  	host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
>  	if (!host) {
>  		err = -ENOMEM;
> -- 
> 2.32.0
> 