* [PATCH] tpm: cr50: Add new device/vendor ID 0x504a6666
@ 2022-04-05 17:37 Jes B. Klinke
2022-04-07 10:14 ` Jarkko Sakkinen
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Jes B. Klinke @ 2022-04-05 17:37 UTC (permalink / raw)
To: linux-integrity
Cc: Paul Menzel, Jes B. Klinke, Jarkko Sakkinen, Jason Gunthorpe,
Peter Huewe, linux-kernel
Accept one additional numerical value of DID:VID for next generation
Google TPM, to be used in future Chromebooks.
This patch touches more lines than may seem necessary, as a result of
the need to move the error case to sit after the two recognized cases.
Signed-off-by: Jes B. Klinke <jbk@chromium.org>
---
drivers/char/tpm/tpm_tis_i2c_cr50.c | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c
index f6c0affbb4567..bf54ebd6724b0 100644
--- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
+++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
@@ -31,6 +31,7 @@
#define TPM_CR50_TIMEOUT_SHORT_MS 2 /* Short timeout during transactions */
#define TPM_CR50_TIMEOUT_NOIRQ_MS 20 /* Timeout for TPM ready without IRQ */
#define TPM_CR50_I2C_DID_VID 0x00281ae0L /* Device and vendor ID reg value */
+#define TPM_TI50_I2C_DID_VID 0x504a6666L /* Device and vendor ID reg value */
#define TPM_CR50_I2C_MAX_RETRIES 3 /* Max retries due to I2C errors */
#define TPM_CR50_I2C_RETRY_DELAY_LO 55 /* Min usecs between retries on I2C */
#define TPM_CR50_I2C_RETRY_DELAY_HI 65 /* Max usecs between retries on I2C */
@@ -742,16 +743,20 @@ static int tpm_cr50_i2c_probe(struct i2c_client *client)
}
vendor = le32_to_cpup((__le32 *)buf);
- if (vendor != TPM_CR50_I2C_DID_VID) {
- dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
- tpm_cr50_release_locality(chip, true);
- return -ENODEV;
+ if (vendor == TPM_CR50_I2C_DID_VID) {
+ dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
+ client->addr, client->irq, vendor >> 16);
+ return tpm_chip_register(chip);
+ }
+ if (vendor == TPM_TI50_I2C_DID_VID) {
+ dev_info(dev, "ti50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
+ client->addr, client->irq, vendor >> 16);
+ return tpm_chip_register(chip);
}
- dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
- client->addr, client->irq, vendor >> 16);
-
- return tpm_chip_register(chip);
+ dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
+ tpm_cr50_release_locality(chip, true);
+ return -ENODEV;
}
/**
--
2.35.1.1094.g7c7d902a7c-goog
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH] tpm: cr50: Add new device/vendor ID 0x504a6666
2022-04-05 17:37 [PATCH] tpm: cr50: Add new device/vendor ID 0x504a6666 Jes B. Klinke
@ 2022-04-07 10:14 ` Jarkko Sakkinen
2022-04-07 10:21 ` Paul Menzel
2022-04-14 12:06 ` Jarkko Sakkinen
2 siblings, 0 replies; 8+ messages in thread
From: Jarkko Sakkinen @ 2022-04-07 10:14 UTC (permalink / raw)
To: Jes B. Klinke
Cc: linux-integrity, Paul Menzel, Jason Gunthorpe, Peter Huewe, linux-kernel
On Tue, Apr 05, 2022 at 10:37:41AM -0700, Jes B. Klinke wrote:
> Accept one additional numerical value of DID:VID for next generation
> Google TPM, to be used in future Chromebooks.
>
> This patch touches more lines than may seem necessary, as a result of
> the need to move the error case to sit after the two recognized cases.
>
> Signed-off-by: Jes B. Klinke <jbk@chromium.org>
> ---
>
> drivers/char/tpm/tpm_tis_i2c_cr50.c | 21 +++++++++++++--------
> 1 file changed, 13 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> index f6c0affbb4567..bf54ebd6724b0 100644
> --- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
> +++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> @@ -31,6 +31,7 @@
> #define TPM_CR50_TIMEOUT_SHORT_MS 2 /* Short timeout during transactions */
> #define TPM_CR50_TIMEOUT_NOIRQ_MS 20 /* Timeout for TPM ready without IRQ */
> #define TPM_CR50_I2C_DID_VID 0x00281ae0L /* Device and vendor ID reg value */
> +#define TPM_TI50_I2C_DID_VID 0x504a6666L /* Device and vendor ID reg value */
> #define TPM_CR50_I2C_MAX_RETRIES 3 /* Max retries due to I2C errors */
> #define TPM_CR50_I2C_RETRY_DELAY_LO 55 /* Min usecs between retries on I2C */
> #define TPM_CR50_I2C_RETRY_DELAY_HI 65 /* Max usecs between retries on I2C */
> @@ -742,16 +743,20 @@ static int tpm_cr50_i2c_probe(struct i2c_client *client)
> }
>
> vendor = le32_to_cpup((__le32 *)buf);
> - if (vendor != TPM_CR50_I2C_DID_VID) {
> - dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
> - tpm_cr50_release_locality(chip, true);
> - return -ENODEV;
> + if (vendor == TPM_CR50_I2C_DID_VID) {
> + dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> + client->addr, client->irq, vendor >> 16);
> + return tpm_chip_register(chip);
> + }
> + if (vendor == TPM_TI50_I2C_DID_VID) {
> + dev_info(dev, "ti50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> + client->addr, client->irq, vendor >> 16);
> + return tpm_chip_register(chip);
> }
>
> - dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> - client->addr, client->irq, vendor >> 16);
> -
> - return tpm_chip_register(chip);
> + dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
> + tpm_cr50_release_locality(chip, true);
> + return -ENODEV;
> }
>
> /**
> --
> 2.35.1.1094.g7c7d902a7c-goog
>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
BR, Jarkko
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] tpm: cr50: Add new device/vendor ID 0x504a6666
2022-04-05 17:37 [PATCH] tpm: cr50: Add new device/vendor ID 0x504a6666 Jes B. Klinke
2022-04-07 10:14 ` Jarkko Sakkinen
@ 2022-04-07 10:21 ` Paul Menzel
2022-04-14 12:08 ` Jarkko Sakkinen
2022-04-14 12:06 ` Jarkko Sakkinen
2 siblings, 1 reply; 8+ messages in thread
From: Paul Menzel @ 2022-04-07 10:21 UTC (permalink / raw)
To: Jes B. Klinke
Cc: linux-integrity, Jarkko Sakkinen, Jason Gunthorpe, Peter Huewe,
linux-kernel
Dear Jes,
Thank you for your patch.
Am 05.04.22 um 19:37 schrieb Jes B. Klinke:
> Accept one additional numerical value of DID:VID for next generation
> Google TPM, to be used in future Chromebooks.
Maybe extend:
… Google TPM with new firmware …
The TPM with the new firmware has the code name TI50, and going to use
the same interfaces.
> This patch touches more lines than may seem necessary, as a result of
> the need to move the error case to sit after the two recognized cases.
>
> Signed-off-by: Jes B. Klinke <jbk@chromium.org>
> ---
>
> drivers/char/tpm/tpm_tis_i2c_cr50.c | 21 +++++++++++++--------
> 1 file changed, 13 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> index f6c0affbb4567..bf54ebd6724b0 100644
> --- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
> +++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> @@ -31,6 +31,7 @@
> #define TPM_CR50_TIMEOUT_SHORT_MS 2 /* Short timeout during transactions */
> #define TPM_CR50_TIMEOUT_NOIRQ_MS 20 /* Timeout for TPM ready without IRQ */
> #define TPM_CR50_I2C_DID_VID 0x00281ae0L /* Device and vendor ID reg value */
> +#define TPM_TI50_I2C_DID_VID 0x504a6666L /* Device and vendor ID reg value */
> #define TPM_CR50_I2C_MAX_RETRIES 3 /* Max retries due to I2C errors */
> #define TPM_CR50_I2C_RETRY_DELAY_LO 55 /* Min usecs between retries on I2C */
> #define TPM_CR50_I2C_RETRY_DELAY_HI 65 /* Max usecs between retries on I2C */
> @@ -742,16 +743,20 @@ static int tpm_cr50_i2c_probe(struct i2c_client *client)
> }
>
> vendor = le32_to_cpup((__le32 *)buf);
> - if (vendor != TPM_CR50_I2C_DID_VID) {
> - dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
> - tpm_cr50_release_locality(chip, true);
> - return -ENODEV;
> + if (vendor == TPM_CR50_I2C_DID_VID) {
> + dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> + client->addr, client->irq, vendor >> 16);
> + return tpm_chip_register(chip);
> + }
> + if (vendor == TPM_TI50_I2C_DID_VID) {
> + dev_info(dev, "ti50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> + client->addr, client->irq, vendor >> 16);
> + return tpm_chip_register(chip);
> }
Both branches are quite similar. Can a ternary operator be used?
dev_info(dev, "%s TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
(vendor == TPM_CR50_I2C_DID_VID) ? "cr50" : "ti50", client->addr,
client->irq, vendor >> 16);
return tpm_chip_register(chip);
and the original flow be left? (A separate variable can also be added.)
>
> - dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> - client->addr, client->irq, vendor >> 16);
> -
> - return tpm_chip_register(chip);
> + dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
> + tpm_cr50_release_locality(chip, true);
> + return -ENODEV;
> }
>
> /**
Kind regards,
Paul
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] tpm: cr50: Add new device/vendor ID 0x504a6666
2022-04-05 17:37 [PATCH] tpm: cr50: Add new device/vendor ID 0x504a6666 Jes B. Klinke
2022-04-07 10:14 ` Jarkko Sakkinen
2022-04-07 10:21 ` Paul Menzel
@ 2022-04-14 12:06 ` Jarkko Sakkinen
2 siblings, 0 replies; 8+ messages in thread
From: Jarkko Sakkinen @ 2022-04-14 12:06 UTC (permalink / raw)
To: Jes B. Klinke
Cc: linux-integrity, Paul Menzel, Jason Gunthorpe, Peter Huewe, linux-kernel
On Tue, Apr 05, 2022 at 10:37:41AM -0700, Jes B. Klinke wrote:
> Accept one additional numerical value of DID:VID for next generation
> Google TPM, to be used in future Chromebooks.
>
> This patch touches more lines than may seem necessary, as a result of
> the need to move the error case to sit after the two recognized cases.
>
> Signed-off-by: Jes B. Klinke <jbk@chromium.org>
> ---
>
> drivers/char/tpm/tpm_tis_i2c_cr50.c | 21 +++++++++++++--------
> 1 file changed, 13 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> index f6c0affbb4567..bf54ebd6724b0 100644
> --- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
> +++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> @@ -31,6 +31,7 @@
> #define TPM_CR50_TIMEOUT_SHORT_MS 2 /* Short timeout during transactions */
> #define TPM_CR50_TIMEOUT_NOIRQ_MS 20 /* Timeout for TPM ready without IRQ */
> #define TPM_CR50_I2C_DID_VID 0x00281ae0L /* Device and vendor ID reg value */
> +#define TPM_TI50_I2C_DID_VID 0x504a6666L /* Device and vendor ID reg value */
> #define TPM_CR50_I2C_MAX_RETRIES 3 /* Max retries due to I2C errors */
> #define TPM_CR50_I2C_RETRY_DELAY_LO 55 /* Min usecs between retries on I2C */
> #define TPM_CR50_I2C_RETRY_DELAY_HI 65 /* Max usecs between retries on I2C */
> @@ -742,16 +743,20 @@ static int tpm_cr50_i2c_probe(struct i2c_client *client)
> }
>
> vendor = le32_to_cpup((__le32 *)buf);
> - if (vendor != TPM_CR50_I2C_DID_VID) {
> - dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
> - tpm_cr50_release_locality(chip, true);
> - return -ENODEV;
> + if (vendor == TPM_CR50_I2C_DID_VID) {
> + dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> + client->addr, client->irq, vendor >> 16);
> + return tpm_chip_register(chip);
> + }
> + if (vendor == TPM_TI50_I2C_DID_VID) {
> + dev_info(dev, "ti50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> + client->addr, client->irq, vendor >> 16);
> + return tpm_chip_register(chip);
> }
>
> - dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> - client->addr, client->irq, vendor >> 16);
> -
> - return tpm_chip_register(chip);
> + dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
> + tpm_cr50_release_locality(chip, true);
> + return -ENODEV;
> }
>
> /**
> --
> 2.35.1.1094.g7c7d902a7c-goog
>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
BR, Jarkko
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] tpm: cr50: Add new device/vendor ID 0x504a6666
2022-04-07 10:21 ` Paul Menzel
@ 2022-04-14 12:08 ` Jarkko Sakkinen
2022-04-14 15:06 ` Paul Menzel
0 siblings, 1 reply; 8+ messages in thread
From: Jarkko Sakkinen @ 2022-04-14 12:08 UTC (permalink / raw)
To: Paul Menzel
Cc: Jes B. Klinke, linux-integrity, Jason Gunthorpe, Peter Huewe,
linux-kernel
On Thu, Apr 07, 2022 at 12:21:44PM +0200, Paul Menzel wrote:
> Dear Jes,
>
>
> Thank you for your patch.
>
> Am 05.04.22 um 19:37 schrieb Jes B. Klinke:
> > Accept one additional numerical value of DID:VID for next generation
> > Google TPM, to be used in future Chromebooks.
>
> Maybe extend:
>
> … Google TPM with new firmware …
>
> The TPM with the new firmware has the code name TI50, and going to use the
> same interfaces.
>
> > This patch touches more lines than may seem necessary, as a result of
> > the need to move the error case to sit after the two recognized cases.
> >
> > Signed-off-by: Jes B. Klinke <jbk@chromium.org>
> > ---
> >
> > drivers/char/tpm/tpm_tis_i2c_cr50.c | 21 +++++++++++++--------
> > 1 file changed, 13 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > index f6c0affbb4567..bf54ebd6724b0 100644
> > --- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > +++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > @@ -31,6 +31,7 @@
> > #define TPM_CR50_TIMEOUT_SHORT_MS 2 /* Short timeout during transactions */
> > #define TPM_CR50_TIMEOUT_NOIRQ_MS 20 /* Timeout for TPM ready without IRQ */
> > #define TPM_CR50_I2C_DID_VID 0x00281ae0L /* Device and vendor ID reg value */
> > +#define TPM_TI50_I2C_DID_VID 0x504a6666L /* Device and vendor ID reg value */
> > #define TPM_CR50_I2C_MAX_RETRIES 3 /* Max retries due to I2C errors */
> > #define TPM_CR50_I2C_RETRY_DELAY_LO 55 /* Min usecs between retries on I2C */
> > #define TPM_CR50_I2C_RETRY_DELAY_HI 65 /* Max usecs between retries on I2C */
> > @@ -742,16 +743,20 @@ static int tpm_cr50_i2c_probe(struct i2c_client *client)
> > }
> > vendor = le32_to_cpup((__le32 *)buf);
> > - if (vendor != TPM_CR50_I2C_DID_VID) {
> > - dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
> > - tpm_cr50_release_locality(chip, true);
> > - return -ENODEV;
> > + if (vendor == TPM_CR50_I2C_DID_VID) {
> > + dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> > + client->addr, client->irq, vendor >> 16);
> > + return tpm_chip_register(chip);
> > + }
> > + if (vendor == TPM_TI50_I2C_DID_VID) {
> > + dev_info(dev, "ti50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> > + client->addr, client->irq, vendor >> 16);
> > + return tpm_chip_register(chip);
> > }
>
> Both branches are quite similar. Can a ternary operator be used?
>
> dev_info(dev, "%s TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> (vendor == TPM_CR50_I2C_DID_VID) ? "cr50" : "ti50", client->addr,
> client->irq, vendor >> 16);
> return tpm_chip_register(chip);
>
> and the original flow be left? (A separate variable can also be added.)
>
> > - dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> > - client->addr, client->irq, vendor >> 16);
> > -
> > - return tpm_chip_register(chip);
> > + dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
> > + tpm_cr50_release_locality(chip, true);
> > + return -ENODEV;
> > }
> > /**
>
>
> Kind regards,
>
> Paul
OK, these are legit suggestions. Paul, can you do these changes and add my
reviewed-by for the +1 version?
BR, Jarkko
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] tpm: cr50: Add new device/vendor ID 0x504a6666
2022-04-14 12:08 ` Jarkko Sakkinen
@ 2022-04-14 15:06 ` Paul Menzel
2022-04-14 16:51 ` Jarkko Sakkinen
0 siblings, 1 reply; 8+ messages in thread
From: Paul Menzel @ 2022-04-14 15:06 UTC (permalink / raw)
To: Jarkko Sakkinen
Cc: Jes B. Klinke, linux-integrity, Jason Gunthorpe, Peter Huewe,
linux-kernel
Dear Jarkko,
Am 14.04.22 um 14:08 schrieb Jarkko Sakkinen:
> On Thu, Apr 07, 2022 at 12:21:44PM +0200, Paul Menzel wrote:
>> Thank you for your patch.
>>
>> Am 05.04.22 um 19:37 schrieb Jes B. Klinke:
>>> Accept one additional numerical value of DID:VID for next generation
>>> Google TPM, to be used in future Chromebooks.
>>
>> Maybe extend:
>>
>> … Google TPM with new firmware …
>>
>> The TPM with the new firmware has the code name TI50, and going to use the
>> same interfaces.
>>
>>> This patch touches more lines than may seem necessary, as a result of
>>> the need to move the error case to sit after the two recognized cases.
>>>
>>> Signed-off-by: Jes B. Klinke <jbk@chromium.org>
>>> ---
>>>
>>> drivers/char/tpm/tpm_tis_i2c_cr50.c | 21 +++++++++++++--------
>>> 1 file changed, 13 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c
>>> index f6c0affbb4567..bf54ebd6724b0 100644
>>> --- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
>>> +++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
>>> @@ -31,6 +31,7 @@
>>> #define TPM_CR50_TIMEOUT_SHORT_MS 2 /* Short timeout during transactions */
>>> #define TPM_CR50_TIMEOUT_NOIRQ_MS 20 /* Timeout for TPM ready without IRQ */
>>> #define TPM_CR50_I2C_DID_VID 0x00281ae0L /* Device and vendor ID reg value */
>>> +#define TPM_TI50_I2C_DID_VID 0x504a6666L /* Device and vendor ID reg value */
>>> #define TPM_CR50_I2C_MAX_RETRIES 3 /* Max retries due to I2C errors */
>>> #define TPM_CR50_I2C_RETRY_DELAY_LO 55 /* Min usecs between retries on I2C */
>>> #define TPM_CR50_I2C_RETRY_DELAY_HI 65 /* Max usecs between retries on I2C */
>>> @@ -742,16 +743,20 @@ static int tpm_cr50_i2c_probe(struct i2c_client *client)
>>> }
>>> vendor = le32_to_cpup((__le32 *)buf);
>>> - if (vendor != TPM_CR50_I2C_DID_VID) {
>>> - dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
>>> - tpm_cr50_release_locality(chip, true);
>>> - return -ENODEV;
>>> + if (vendor == TPM_CR50_I2C_DID_VID) {
>>> + dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
>>> + client->addr, client->irq, vendor >> 16);
>>> + return tpm_chip_register(chip);
>>> + }
>>> + if (vendor == TPM_TI50_I2C_DID_VID) {
>>> + dev_info(dev, "ti50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
>>> + client->addr, client->irq, vendor >> 16);
>>> + return tpm_chip_register(chip);
>>> }
>>
>> Both branches are quite similar. Can a ternary operator be used?
>>
>> dev_info(dev, "%s TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
>> (vendor == TPM_CR50_I2C_DID_VID) ? "cr50" : "ti50", client->addr,
>> client->irq, vendor >> 16);
>> return tpm_chip_register(chip);
>>
>> and the original flow be left? (A separate variable can also be added.)
>>
>>> - dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
>>> - client->addr, client->irq, vendor >> 16);
>>> -
>>> - return tpm_chip_register(chip);
>>> + dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
>>> + tpm_cr50_release_locality(chip, true);
>>> + return -ENODEV;
>>> }
>>> /**
> OK, these are legit suggestions. Paul, can you do these changes and add my
> reviewed-by for the +1 version?
I guess you mean Jes?
Kind regards,
Paul
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] tpm: cr50: Add new device/vendor ID 0x504a6666
2022-04-14 15:06 ` Paul Menzel
@ 2022-04-14 16:51 ` Jarkko Sakkinen
2022-04-19 23:39 ` Jes Klinke
0 siblings, 1 reply; 8+ messages in thread
From: Jarkko Sakkinen @ 2022-04-14 16:51 UTC (permalink / raw)
To: Paul Menzel
Cc: Jes B. Klinke, linux-integrity, Jason Gunthorpe, Peter Huewe,
linux-kernel
On Thu, 2022-04-14 at 17:06 +0200, Paul Menzel wrote:
> Dear Jarkko,
>
>
> Am 14.04.22 um 14:08 schrieb Jarkko Sakkinen:
> > On Thu, Apr 07, 2022 at 12:21:44PM +0200, Paul Menzel wrote:
>
> > > Thank you for your patch.
> > >
> > > Am 05.04.22 um 19:37 schrieb Jes B. Klinke:
> > > > Accept one additional numerical value of DID:VID for next generation
> > > > Google TPM, to be used in future Chromebooks.
> > >
> > > Maybe extend:
> > >
> > > … Google TPM with new firmware …
> > >
> > > The TPM with the new firmware has the code name TI50, and going to use the
> > > same interfaces.
> > >
> > > > This patch touches more lines than may seem necessary, as a result of
> > > > the need to move the error case to sit after the two recognized cases.
> > > >
> > > > Signed-off-by: Jes B. Klinke <jbk@chromium.org>
> > > > ---
> > > >
> > > > drivers/char/tpm/tpm_tis_i2c_cr50.c | 21 +++++++++++++--------
> > > > 1 file changed, 13 insertions(+), 8 deletions(-)
> > > >
> > > > diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > > > index f6c0affbb4567..bf54ebd6724b0 100644
> > > > --- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > > > +++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > > > @@ -31,6 +31,7 @@
> > > > #define TPM_CR50_TIMEOUT_SHORT_MS 2 /* Short timeout during transactions */
> > > > #define TPM_CR50_TIMEOUT_NOIRQ_MS 20 /* Timeout for TPM ready without IRQ */
> > > > #define TPM_CR50_I2C_DID_VID 0x00281ae0L /* Device and vendor ID reg value */
> > > > +#define TPM_TI50_I2C_DID_VID 0x504a6666L /* Device and vendor ID reg value */
> > > > #define TPM_CR50_I2C_MAX_RETRIES 3 /* Max retries due to I2C errors */
> > > > #define TPM_CR50_I2C_RETRY_DELAY_LO 55 /* Min usecs between retries on I2C */
> > > > #define TPM_CR50_I2C_RETRY_DELAY_HI 65 /* Max usecs between retries on I2C */
> > > > @@ -742,16 +743,20 @@ static int tpm_cr50_i2c_probe(struct i2c_client *client)
> > > > }
> > > > vendor = le32_to_cpup((__le32 *)buf);
> > > > - if (vendor != TPM_CR50_I2C_DID_VID) {
> > > > - dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
> > > > - tpm_cr50_release_locality(chip, true);
> > > > - return -ENODEV;
> > > > + if (vendor == TPM_CR50_I2C_DID_VID) {
> > > > + dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> > > > + client->addr, client->irq, vendor >> 16);
> > > > + return tpm_chip_register(chip);
> > > > + }
> > > > + if (vendor == TPM_TI50_I2C_DID_VID) {
> > > > + dev_info(dev, "ti50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> > > > + client->addr, client->irq, vendor >> 16);
> > > > + return tpm_chip_register(chip);
> > > > }
> > >
> > > Both branches are quite similar. Can a ternary operator be used?
> > >
> > > dev_info(dev, "%s TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> > > (vendor == TPM_CR50_I2C_DID_VID) ? "cr50" : "ti50", client->addr,
> > > client->irq, vendor >> 16);
> > > return tpm_chip_register(chip);
> > >
> > > and the original flow be left? (A separate variable can also be added.)
> > >
> > > > - dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> > > > - client->addr, client->irq, vendor >> 16);
> > > > -
> > > > - return tpm_chip_register(chip);
> > > > + dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
> > > > + tpm_cr50_release_locality(chip, true);
> > > > + return -ENODEV;
> > > > }
> > > > /**
>
> > OK, these are legit suggestions. Paul, can you do these changes and add my
> > reviewed-by for the +1 version?
>
> I guess you mean Jes?
>
>
> Kind regards,
Yeah, I meant Jes :-)
/Jarkko
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] tpm: cr50: Add new device/vendor ID 0x504a6666
2022-04-14 16:51 ` Jarkko Sakkinen
@ 2022-04-19 23:39 ` Jes Klinke
0 siblings, 0 replies; 8+ messages in thread
From: Jes Klinke @ 2022-04-19 23:39 UTC (permalink / raw)
To: Jarkko Sakkinen
Cc: Paul Menzel, Jes B. Klinke, linux-integrity, Jason Gunthorpe,
Peter Huewe, linux-kernel
Thanks for your feedback, I have sent an updated patch to the list,
(as far as I could tell, the convention is to prefix with: [PATCH
v2]).
Regards
Jes
On Thu, Apr 14, 2022 at 9:53 AM Jarkko Sakkinen <jarkko@kernel.org> wrote:
>
> On Thu, 2022-04-14 at 17:06 +0200, Paul Menzel wrote:
> > Dear Jarkko,
> >
> >
> > Am 14.04.22 um 14:08 schrieb Jarkko Sakkinen:
> > > On Thu, Apr 07, 2022 at 12:21:44PM +0200, Paul Menzel wrote:
> >
> > > > Thank you for your patch.
> > > >
> > > > Am 05.04.22 um 19:37 schrieb Jes B. Klinke:
> > > > > Accept one additional numerical value of DID:VID for next generation
> > > > > Google TPM, to be used in future Chromebooks.
> > > >
> > > > Maybe extend:
> > > >
> > > > … Google TPM with new firmware …
> > > >
> > > > The TPM with the new firmware has the code name TI50, and going to use the
> > > > same interfaces.
> > > >
> > > > > This patch touches more lines than may seem necessary, as a result of
> > > > > the need to move the error case to sit after the two recognized cases.
> > > > >
> > > > > Signed-off-by: Jes B. Klinke <jbk@chromium.org>
> > > > > ---
> > > > >
> > > > > drivers/char/tpm/tpm_tis_i2c_cr50.c | 21 +++++++++++++--------
> > > > > 1 file changed, 13 insertions(+), 8 deletions(-)
> > > > >
> > > > > diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > > > > index f6c0affbb4567..bf54ebd6724b0 100644
> > > > > --- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > > > > +++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > > > > @@ -31,6 +31,7 @@
> > > > > #define TPM_CR50_TIMEOUT_SHORT_MS 2 /* Short timeout during transactions */
> > > > > #define TPM_CR50_TIMEOUT_NOIRQ_MS 20 /* Timeout for TPM ready without IRQ */
> > > > > #define TPM_CR50_I2C_DID_VID 0x00281ae0L /* Device and vendor ID reg value */
> > > > > +#define TPM_TI50_I2C_DID_VID 0x504a6666L /* Device and vendor ID reg value */
> > > > > #define TPM_CR50_I2C_MAX_RETRIES 3 /* Max retries due to I2C errors */
> > > > > #define TPM_CR50_I2C_RETRY_DELAY_LO 55 /* Min usecs between retries on I2C */
> > > > > #define TPM_CR50_I2C_RETRY_DELAY_HI 65 /* Max usecs between retries on I2C */
> > > > > @@ -742,16 +743,20 @@ static int tpm_cr50_i2c_probe(struct i2c_client *client)
> > > > > }
> > > > > vendor = le32_to_cpup((__le32 *)buf);
> > > > > - if (vendor != TPM_CR50_I2C_DID_VID) {
> > > > > - dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
> > > > > - tpm_cr50_release_locality(chip, true);
> > > > > - return -ENODEV;
> > > > > + if (vendor == TPM_CR50_I2C_DID_VID) {
> > > > > + dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> > > > > + client->addr, client->irq, vendor >> 16);
> > > > > + return tpm_chip_register(chip);
> > > > > + }
> > > > > + if (vendor == TPM_TI50_I2C_DID_VID) {
> > > > > + dev_info(dev, "ti50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> > > > > + client->addr, client->irq, vendor >> 16);
> > > > > + return tpm_chip_register(chip);
> > > > > }
> > > >
> > > > Both branches are quite similar. Can a ternary operator be used?
> > > >
> > > > dev_info(dev, "%s TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> > > > (vendor == TPM_CR50_I2C_DID_VID) ? "cr50" : "ti50", client->addr,
> > > > client->irq, vendor >> 16);
> > > > return tpm_chip_register(chip);
> > > >
> > > > and the original flow be left? (A separate variable can also be added.)
> > > >
> > > > > - dev_info(dev, "cr50 TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> > > > > - client->addr, client->irq, vendor >> 16);
> > > > > -
> > > > > - return tpm_chip_register(chip);
> > > > > + dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
> > > > > + tpm_cr50_release_locality(chip, true);
> > > > > + return -ENODEV;
> > > > > }
> > > > > /**
> >
> > > OK, these are legit suggestions. Paul, can you do these changes and add my
> > > reviewed-by for the +1 version?
> >
> > I guess you mean Jes?
> >
> >
> > Kind regards,
>
> Yeah, I meant Jes :-)
>
> /Jarkko
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-04-19 23:41 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-05 17:37 [PATCH] tpm: cr50: Add new device/vendor ID 0x504a6666 Jes B. Klinke
2022-04-07 10:14 ` Jarkko Sakkinen
2022-04-07 10:21 ` Paul Menzel
2022-04-14 12:08 ` Jarkko Sakkinen
2022-04-14 15:06 ` Paul Menzel
2022-04-14 16:51 ` Jarkko Sakkinen
2022-04-19 23:39 ` Jes Klinke
2022-04-14 12:06 ` Jarkko Sakkinen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).