Re: [PATCH 1/3] tty: serial: introduce uart_port_tx{,_limit}() helpers

[Greg KH <gregkh@linuxfoundation.org>]

On Mon, Apr 11, 2022 at 12:54:03PM +0200, Jiri Slaby wrote:
> Many serial drivers do the same thing:
> * send x_char if set
> * keep sending from the xmit circular buffer until either
>   - the loop reaches the end of the xmit buffer
>   - TX is stopped
>   - HW fifo is full
> * check for pending characters and:
>   - wake up tty writers to fill for more data into xmit buffer
>   - stop TX if there is nothing in the xmit buffer
> 
> The only differences are:
> * how to write the character to the HW fifo
> * the check of the end condition:
>   - is the HW fifo full?
>   - is limit of the written characters reached?
> 
> So unify the above into two helpers:
> * uart_port_tx_limit() -- the generic one, it performs the above taking
>   into account the written characters limit
> * uart_port_tx() -- calls the above with ~0 as the limit. So it only
>   checks the HW fullness.
> 
> We need three more hooks in struct uart_ops for all this to work:
> * tx_ready() -- returns true if HW can accept more data.
> * put_char() -- write a character to the device.
> * tx_done() -- when the write loop is done, perform arbitrary action
>   before potential invocation of ops->stop_tx() happens.
> 
> NOTE1: Maybe the three hooks in uart_ops above are overkill. We can
> instead pass pointers to the three functions directly to the new helpers
> as they are not used elsewhere. Similar to uart_console_write() and its
> putchar().
> 
> NOTE2: These two new helper functions call the hooks per every character
> processed. I was unable to measure any difference, provided most time is
> spent by readb (or alike) in the hooks themselves.  First, LTO might
> help to eliminate these explicit calls (we might need NOTE1 to be
> implemented for this to be true). Second, if this turns out to be a
> problem, we can introduce a macro to build the helper in the driver's
> code instead of serial_core. That is, similar to wait_event().
> 
> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> ---
>  Documentation/driver-api/serial/driver.rst | 28 ++++++++++++
>  drivers/tty/serial/serial_core.c           | 53 ++++++++++++++++++++++
>  include/linux/serial_core.h                |  9 ++++
>  3 files changed, 90 insertions(+)
> 
> diff --git a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst
> index 06ec04ba086f..7dc3791addeb 100644
> --- a/Documentation/driver-api/serial/driver.rst
> +++ b/Documentation/driver-api/serial/driver.rst
> @@ -80,6 +80,34 @@ hardware.
>  
>  	This call must not sleep
>  
> +  tx_ready(port)
> +	The driver returns true if the HW can accept more data to be sent.
> +
> +	Locking: port->lock taken.
> +
> +	Interrupts: locally disabled.
> +
> +	This call must not sleep.
> +
> +  put_char(port, ch)
> +	The driver is asked to write ch to the device.
> +
> +	Locking: port->lock taken.
> +
> +	Interrupts: locally disabled.
> +
> +	This call must not sleep.
> +
> +  tx_done(port)
> +	When the write loop is done, the driver can perform arbitrary action
> +	here before potential invocation of ops->stop_tx() happens.
> +
> +	Locking: port->lock taken.
> +
> +	Interrupts: locally disabled.
> +
> +	This call must not sleep.
> +
>    set_mctrl(port, mctrl)
>  	This function sets the modem control lines for port described
>  	by 'port' to the state described by mctrl.  The relevant bits
> diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
> index 6a8963caf954..1be14e90066c 100644
> --- a/drivers/tty/serial/serial_core.c
> +++ b/drivers/tty/serial/serial_core.c
> @@ -107,6 +107,59 @@ void uart_write_wakeup(struct uart_port *port)
>  }
>  EXPORT_SYMBOL(uart_write_wakeup);
>  
> +static bool uart_port_tx_always_ready(struct uart_port *port)
> +{
> +	return true;
> +}
> +
> +/**
> + * uart_port_tx_limit -- transmit helper for uart_port
> + * @port: from which port to transmit
> + * @count: limit count
> + *
> + * uart_port_tx_limit() transmits characters from the xmit buffer to the
> + * hardware using @uart_port::ops::put_char(). It does so until @count
> + * characters are sent and while @uart_port::ops::tx_ready() still returns
> + * non-zero (if non-NULL).
> + *
> + * Return: number of characters in the xmit buffer when done.
> + */
> +unsigned int uart_port_tx_limit(struct uart_port *port, unsigned int count)
> +{
> +	struct circ_buf *xmit = &port->state->xmit;
> +	bool (*tx_ready)(struct uart_port *) = port->ops->tx_ready ? :
> +		uart_port_tx_always_ready;
> +	unsigned int pending;
> +
> +	for (; count && tx_ready(port); count--, port->icount.tx++) {
> +		if (port->x_char) {
> +			port->ops->put_char(port, port->x_char);
> +			port->x_char = 0;
> +			continue;
> +		}
> +
> +		if (uart_circ_empty(xmit) || uart_tx_stopped(port))
> +			break;
> +
> +		port->ops->put_char(port, xmit->buf[xmit->tail]);

That's a lot of redirection and function pointer mess per each character
sent now.  With the spectre overhead here (and only getting worse), this
feels like a step backwards.

I doubt throughput matters here given cpu speeds now, _but_ the cpu load
should go up.

Although on smaller cpus with slower Mhz and faster line rates, this
feels like a lot of extra work happening for no real good reason.

Any benchmarks?

thanks,

greg k-h