linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johannes Weiner <hannes@cmpxchg.org>
To: Minchan Kim <minchan@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	Michal Hocko <mhocko@suse.com>, Roman Gushchin <guro@fb.com>,
	Shakeel Butt <shakeelb@google.com>,
	Seth Jennings <sjenning@redhat.com>,
	Dan Streetman <ddstreet@ieee.org>,
	linux-mm@kvack.org, cgroups@vger.kernel.org,
	linux-kernel@vger.kernel.org, kernel-team@fb.com
Subject: Re: [PATCH 4/5] mm: zswap: add basic meminfo and vmstat coverage
Date: Wed, 27 Apr 2022 17:20:29 -0400	[thread overview]
Message-ID: <YmmznQ8AO5RLxicA@cmpxchg.org> (raw)
In-Reply-To: <Ymmnrkn0mSWcuvmH@google.com>

On Wed, Apr 27, 2022 at 01:29:34PM -0700, Minchan Kim wrote:
> Hi Johannes,
> 
> On Wed, Apr 27, 2022 at 12:00:15PM -0400, Johannes Weiner wrote:
> > Currently it requires poking at debugfs to figure out the size and
> > population of the zswap cache on a host. There are no counters for
> > reads and writes against the cache. As a result, it's difficult to
> > understand zswap behavior on production systems.
> > 
> > Print zswap memory consumption and how many pages are zswapped out in
> > /proc/meminfo. Count zswapouts and zswapins in /proc/vmstat.
> > 
> > Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
> > ---
> >  fs/proc/meminfo.c             |  7 +++++++
> >  include/linux/swap.h          |  5 +++++
> >  include/linux/vm_event_item.h |  4 ++++
> >  mm/vmstat.c                   |  4 ++++
> >  mm/zswap.c                    | 13 ++++++-------
> >  5 files changed, 26 insertions(+), 7 deletions(-)
> > 
> > diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
> > index 6fa761c9cc78..6e89f0e2fd20 100644
> > --- a/fs/proc/meminfo.c
> > +++ b/fs/proc/meminfo.c
> > @@ -86,6 +86,13 @@ static int meminfo_proc_show(struct seq_file *m, void *v)
> >  
> >  	show_val_kb(m, "SwapTotal:      ", i.totalswap);
> >  	show_val_kb(m, "SwapFree:       ", i.freeswap);
> > +#ifdef CONFIG_ZSWAP
> > +	seq_printf(m,  "Zswap:          %8lu kB\n",
> > +		   (unsigned long)(zswap_pool_total_size >> 10));
> > +	seq_printf(m,  "Zswapped:       %8lu kB\n",
> > +		   (unsigned long)atomic_read(&zswap_stored_pages) <<
> > +		   (PAGE_SHIFT - 10));
> > +#endif
> 
> I agree it would be very handy to have the memory consumption in meminfo
> 
> https://lore.kernel.org/all/YYwZXrL3Fu8%2FvLZw@google.com/
> 
> If we really go this Zswap only metric instead of general term
> "Compressed", I'd like to post maybe "Zram:" with same reason
> in this patchset. Do you think that's better idea instead of
> introducing general term like "Compressed:" or something else?

I'm fine with changing it to Compressed. If somebody cares about a
more detailed breakdown, we can add Zswap, Zram subsets as needed.

From 8e9e2d6490b7082c41743fbdb9ffd2db4e3ce962 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@cmpxchg.org>
Date: Wed, 27 Apr 2022 17:15:15 -0400
Subject: [PATCH] mm: zswap: add basic meminfo and vmstat coverage fix fix

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
---
 Documentation/filesystems/proc.rst | 7 ++++---
 fs/proc/meminfo.c                  | 2 +-
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst
index 8b5a94cfa722..93edcf233464 100644
--- a/Documentation/filesystems/proc.rst
+++ b/Documentation/filesystems/proc.rst
@@ -964,7 +964,7 @@ Example output. You may not have all of these fields.
     Mlocked:               0 kB
     SwapTotal:             0 kB
     SwapFree:              0 kB
-    Zswap:              1904 kB
+    Compressed:         1904 kB
     Zswapped:           7792 kB
     Dirty:                12 kB
     Writeback:             0 kB
@@ -1057,8 +1057,9 @@ SwapTotal
 SwapFree
               Memory which has been evicted from RAM, and is temporarily
               on the disk
-Zswap
-              Memory consumed by the zswap backend (compressed size)
+Compressed
+              Memory consumed by compression backends, such as zswap
+              (compressed size)
 Zswapped
               Amount of anonymous memory stored in zswap (original size)
 Dirty
diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
index 6e89f0e2fd20..554d6f230e67 100644
--- a/fs/proc/meminfo.c
+++ b/fs/proc/meminfo.c
@@ -87,7 +87,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v)
 	show_val_kb(m, "SwapTotal:      ", i.totalswap);
 	show_val_kb(m, "SwapFree:       ", i.freeswap);
 #ifdef CONFIG_ZSWAP
-	seq_printf(m,  "Zswap:          %8lu kB\n",
+	seq_printf(m,  "Compressed:     %8lu kB\n",
 		   (unsigned long)(zswap_pool_total_size >> 10));
 	seq_printf(m,  "Zswapped:       %8lu kB\n",
 		   (unsigned long)atomic_read(&zswap_stored_pages) <<
-- 
2.35.3

  reply	other threads:[~2022-04-27 21:21 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-27 16:00 [PATCH 0/5] zswap: cgroup accounting & control Johannes Weiner
2022-04-27 16:00 ` [PATCH 1/5] mm: Kconfig: move swap and slab config options to the MM section Johannes Weiner
2022-04-27 16:00 ` [PATCH 2/5] mm: Kconfig: group swap, slab, hotplug and thp options into submenus Johannes Weiner
2022-04-27 16:00 ` [PATCH 3/5] mm: Kconfig: simplify zswap configuration Johannes Weiner
2022-04-27 16:00 ` [PATCH 4/5] mm: zswap: add basic meminfo and vmstat coverage Johannes Weiner
2022-04-27 18:36   ` Andrew Morton
2022-04-27 18:53     ` Johannes Weiner
2022-04-27 19:50       ` Johannes Weiner
2022-04-27 19:51       ` Johannes Weiner
2022-04-27 20:29   ` Minchan Kim
2022-04-27 21:20     ` Johannes Weiner [this message]
2022-04-27 21:36       ` Johannes Weiner
2022-04-27 22:12         ` Minchan Kim
2022-04-28 14:05           ` Johannes Weiner
2022-04-28 17:02             ` Minchan Kim
2022-04-28 17:27               ` Johannes Weiner
2022-04-27 23:36         ` Shakeel Butt
2022-04-28 14:36           ` Johannes Weiner
2022-04-28 14:49             ` Shakeel Butt
2022-04-28 15:16               ` Johannes Weiner
2022-04-28 16:59                 ` Yang Shi
2022-05-05 19:30                 ` Shakeel Butt
2022-04-28 16:54               ` Yang Shi
2022-05-05 19:33                 ` Shakeel Butt
2022-05-05 22:24                   ` Suleiman Souhlal
2022-05-05 23:54                     ` Yu Zhao
2022-04-27 22:16       ` Minchan Kim
2022-04-28 14:25         ` Johannes Weiner
2022-04-28 16:59           ` Minchan Kim
2022-04-28 17:23             ` Johannes Weiner
2022-04-28 17:31               ` Minchan Kim
2022-04-28 18:34                 ` Johannes Weiner
2022-04-28 19:58                   ` Minchan Kim
2022-04-27 16:00 ` [PATCH 5/5] zswap: memcg accounting Johannes Weiner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YmmznQ8AO5RLxicA@cmpxchg.org \
    --to=hannes@cmpxchg.org \
    --cc=akpm@linux-foundation.org \
    --cc=cgroups@vger.kernel.org \
    --cc=ddstreet@ieee.org \
    --cc=guro@fb.com \
    --cc=kernel-team@fb.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    --cc=minchan@kernel.org \
    --cc=shakeelb@google.com \
    --cc=sjenning@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).