From: Bagas Sanjaya <bagasdotme@gmail.com>
To: Quan Nguyen <quan@os.amperecomputing.com>
Cc: macro@orcam.me.uk, Lee Jones <lee@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Jonathan Corbet <corbet@lwn.net>,
Derek Kiernan <derek.kiernan@xilinx.com>,
Dragan Cvetic <dragan.cvetic@xilinx.com>,
Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Thu Nguyen <thu@os.amperecomputing.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
OpenBMC Maillist <openbmc@lists.ozlabs.org>,
Open Source Submission <patches@amperecomputing.com>,
Phong Vo <phong@os.amperecomputing.com>,
thang@os.amperecomputing.com
Subject: Re: [PATCH v9 6/9] docs: misc-devices: (smpro-misc) Add documentation
Date: Sat, 1 Oct 2022 11:11:28 +0700 [thread overview]
Message-ID: <Yze98CgmGuNA0uGr@debian.me> (raw)
In-Reply-To: <20220929094321.770125-7-quan@os.amperecomputing.com>
[-- Attachment #1: Type: text/plain, Size: 7289 bytes --]
On Thu, Sep 29, 2022 at 04:43:18PM +0700, Quan Nguyen wrote:
> Adds documentation for the Ampere(R)'s Altra(R) SMpro misc driver.
>
s/Adds/Add/
> Signed-off-by: Thu Nguyen <thu@os.amperecomputing.com>
> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Does this patch originally authored by Thu? If so, add From: line before
the patch description.
> diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
> index b74b3b34a235..b40cd1b402f7 100644
> --- a/Documentation/misc-devices/index.rst
> +++ b/Documentation/misc-devices/index.rst
> @@ -28,6 +28,7 @@ fit into other categories.
> oxsemi-tornado
> pci-endpoint-test
> smpro-errmon
> + smpro-misc
> spear-pcie-gadget
> uacce
> xilinx_sdfec
> diff --git a/Documentation/misc-devices/smpro-misc.rst b/Documentation/misc-devices/smpro-misc.rst
> new file mode 100644
> index 000000000000..d21be4a09e69
> --- /dev/null
> +++ b/Documentation/misc-devices/smpro-misc.rst
> @@ -0,0 +1,82 @@
> +.. SPDX-License-Identifier: GPL-2.0-only
> +
> +Kernel driver Ampere(R) Altra(R) SMpro miscellaneous
> +====================================================
> +
> +Supported chips:
> +
> + * Ampere(R) Altra(R)
> +
> + Prefix: 'smpro'
> +
> + Reference: Altra SoC BMC Interface Specification
> +
> +Author: Thu Nguyen <thu@os.amperecomputing.com>
> +
> +Description
> +-----------
> +
> +This driver support the monitoring and configuration of various miscellaneous
> +data provided by Ampere(R) Altra(R) SMpro processor.
> +At this time, these include:
> +
> + * Reading Boot Progress information
> + * Configuring SoC Power Limit
> +
> +Sysfs entries
> +-------------
> +
> +1) Boot progress
> +
> +SMpro misc driver creates the sysfs files ``boot_progress``.
> +The format of ``boot_progress`` file is as below::
> +
> +<boot stage><boot status><boot progress>
> +
> +Where:
> +
> +* Boot stage::
> +
> + 0: SMpro firmware booting.
> + 1: PMpro firmware booting.
> + 2: ATF BL1 firmware booting.
> + 3: DDR initialization.
> + 4: DDR training report status.
> + 5: ATF BL2 firmware booting.
> + 6: ATF BL31 firmware booting.
> + 7: ATF BL32 firmware booting.
> + 8: UEFI firmware booting.
> + 9: OS booting.
> +
> +* Boot status::
> +
> + 0: Not started.
> + 1: Started.
> + 2: Complete without error.
> + 3: Failure.
> +
> +* boot progress: 32 bits boot progress code
> +
> +The sysfs ``boot_progress`` only reports the boot state when the host is booting.
> +If the host is already booted, it returns latest state.
> +
> +Example::
> +
> + #cat boot_progress
> + 0102808454A8
> +
> +2) SoC Power Limit
> +
> +SMpro misc driver creates the sysfs file ``soc_power_limit`` to get/set the SoC Power Limit.
> +
> +Reading this sysfs return the current setting of SoC Power Limit (W) in decimal string.
> +Writing the desired value in decimal string to set the SoC Power Limit in Watt (W).
> +The range of SoC Power Limit is 90-500(W) and will be ignored if out of range.
> +
> +Example::
> +
> + #cat soc_power_limit
> + 90
> + #echo 95 > soc_power_limit
> + #cat soc_power_limit
> + 95
The documentation above can be improved (both grammatical and
formatting):
---- >8 ----
diff --git a/Documentation/misc-devices/smpro-misc.rst b/Documentation/misc-devices/smpro-misc.rst
index d21be4a09e69c4..f33466152ac402 100644
--- a/Documentation/misc-devices/smpro-misc.rst
+++ b/Documentation/misc-devices/smpro-misc.rst
@@ -7,76 +7,77 @@ Supported chips:
* Ampere(R) Altra(R)
- Prefix: 'smpro'
+ Prefix: ``smpro``
- Reference: Altra SoC BMC Interface Specification
+ Reference: `Altra SoC BMC Interface Specification`
Author: Thu Nguyen <thu@os.amperecomputing.com>
Description
-----------
-This driver support the monitoring and configuration of various miscellaneous
-data provided by Ampere(R) Altra(R) SMpro processor.
-At this time, these include:
+The smpro-misc driver supports monitoring and configuration of various
+miscellaneous data provided by Ampere(R) Altra(R) SMpro processor.
+Currently, the driver supports:
- * Reading Boot Progress information
- * Configuring SoC Power Limit
+ * reading boot progress information
+ * configuring SoC power limit
Sysfs entries
-------------
1) Boot progress
-SMpro misc driver creates the sysfs files ``boot_progress``.
-The format of ``boot_progress`` file is as below::
+ The driver creates ``boot_progress`` sysfs file. Its format is described
+ as::
-<boot stage><boot status><boot progress>
+ <boot stage><boot status><boot progress>
-Where:
+ where:
-* Boot stage::
+ * ``<boot stage>`` can be:
- 0: SMpro firmware booting.
- 1: PMpro firmware booting.
- 2: ATF BL1 firmware booting.
- 3: DDR initialization.
- 4: DDR training report status.
- 5: ATF BL2 firmware booting.
- 6: ATF BL31 firmware booting.
- 7: ATF BL32 firmware booting.
- 8: UEFI firmware booting.
- 9: OS booting.
+ * 0: SMpro firmware booting.
+ * 1: PMpro firmware booting.
+ * 2: ATF BL1 firmware booting.
+ * 3: DDR initialization.
+ * 4: DDR training report status.
+ * 5: ATF BL2 firmware booting.
+ * 6: ATF BL31 firmware booting.
+ * 7: ATF BL32 firmware booting.
+ * 8: UEFI firmware booting.
+ * 9: OS booting.
-* Boot status::
+ * ``<boot status>`` can be:
- 0: Not started.
- 1: Started.
- 2: Complete without error.
- 3: Failure.
+ * 0: Not started.
+ * 1: Started.
+ * 2: Complete without error.
+ * 3: Failure.
-* boot progress: 32 bits boot progress code
+ * ``<boot progress>``: 32-bit boot progress code
-The sysfs ``boot_progress`` only reports the boot state when the host is booting.
-If the host is already booted, it returns latest state.
+ The sysfs file only reports the boot state when the host is booting. If
+ the host is already booted, it returns the latest state.
-Example::
+ Example::
#cat boot_progress
0102808454A8
-2) SoC Power Limit
+2) SoC power limit
-SMpro misc driver creates the sysfs file ``soc_power_limit`` to get/set the SoC Power Limit.
+ The driver creates ``soc_power_limit`` sysfs file to get/set the SoC
+ power limit.
-Reading this sysfs return the current setting of SoC Power Limit (W) in decimal string.
-Writing the desired value in decimal string to set the SoC Power Limit in Watt (W).
-The range of SoC Power Limit is 90-500(W) and will be ignored if out of range.
+ Reading the file returns the current limit. Write the desired value in
+ decimal to set the limit (in watts). The valid limit range is 90-500 W.
+ If the value is out of range, it will be ignored.
-Example::
+ Example::
- #cat soc_power_limit
- 90
- #echo 95 > soc_power_limit
- #cat soc_power_limit
- 95
+ #cat soc_power_limit
+ 90
+ #echo 95 > soc_power_limit
+ #cat soc_power_limit
+ 95
Thanks.
--
An old man doll... just what I always wanted! - Clara
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2022-10-01 4:11 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-29 9:43 [PATCH v9 0/9] Add Ampere's Altra SMPro MFD and its child drivers Quan Nguyen
2022-09-29 9:43 ` [PATCH v9 1/9] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver Quan Nguyen
2022-10-01 12:59 ` Bagas Sanjaya
2022-10-06 7:47 ` Quan Nguyen
2022-10-26 15:00 ` Guenter Roeck
2022-10-27 3:39 ` Quan Nguyen
2022-09-29 9:43 ` [PATCH v9 2/9] docs: hwmon: (smpro-hwmon) Add documentation Quan Nguyen
2022-10-01 12:56 ` Bagas Sanjaya
2022-10-06 7:47 ` Quan Nguyen
2022-09-29 9:43 ` [PATCH v9 3/9] misc: smpro-errmon: Add Ampere's SMpro error monitor driver Quan Nguyen
2022-09-29 9:53 ` Greg Kroah-Hartman
2022-10-06 7:44 ` Quan Nguyen
2022-09-29 9:43 ` [PATCH v9 4/9] docs: misc-devices: (smpro-errmon) Add documentation Quan Nguyen
2022-09-29 9:56 ` Greg Kroah-Hartman
2022-10-06 7:46 ` Quan Nguyen
2022-09-30 6:07 ` kernel test robot
2022-09-30 13:13 ` Bagas Sanjaya
2022-10-06 7:46 ` Quan Nguyen
2022-09-29 9:43 ` [PATCH v9 5/9] misc: smpro-misc: Add Ampere's Altra SMpro misc driver Quan Nguyen
2022-09-29 9:55 ` Greg Kroah-Hartman
2022-10-06 7:45 ` Quan Nguyen
2022-09-29 9:43 ` [PATCH v9 6/9] docs: misc-devices: (smpro-misc) Add documentation Quan Nguyen
2022-09-29 9:56 ` Greg Kroah-Hartman
2022-10-06 7:45 ` Quan Nguyen
2022-10-01 4:11 ` Bagas Sanjaya [this message]
2022-10-06 7:47 ` Quan Nguyen
2022-09-29 9:43 ` [PATCH v9 7/9] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver Quan Nguyen
2022-09-29 9:43 ` [PATCH v9 8/9] mfd: Add Ampere's Altra SMpro " Quan Nguyen
2022-10-01 10:11 ` kernel test robot
2022-10-24 12:39 ` Lee Jones
2022-10-27 3:39 ` Quan Nguyen
2022-09-29 9:43 ` [PATCH v9 9/9] docs: ABI: testing: Document the Ampere Altra Family's SMpro sysfs interfaces Quan Nguyen
2022-09-30 9:38 ` Bagas Sanjaya
2022-10-06 7:46 ` Quan Nguyen
2022-09-30 19:41 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Yze98CgmGuNA0uGr@debian.me \
--to=bagasdotme@gmail.com \
--cc=arnd@arndb.de \
--cc=corbet@lwn.net \
--cc=derek.kiernan@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=dragan.cvetic@xilinx.com \
--cc=gregkh@linuxfoundation.org \
--cc=jdelvare@suse.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=macro@orcam.me.uk \
--cc=openbmc@lists.ozlabs.org \
--cc=patches@amperecomputing.com \
--cc=phong@os.amperecomputing.com \
--cc=quan@os.amperecomputing.com \
--cc=robh+dt@kernel.org \
--cc=thang@os.amperecomputing.com \
--cc=thu@os.amperecomputing.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).