Re: [PATCH 10/10] ARM: dts: msm: Add TPDA and TPDM support to DTS for RB5

From: Suzuki K Poulose <suzuki.poulose@arm.com>
To: Tao Zhang <quic_taozha@quicinc.com>,
	Mathieu Poirier <mathieu.poirier@linaro.org>,
	Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mike Leach <mike.leach@linaro.org>, Leo Yan <leo.yan@linaro.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Tingwei Zhang <quic_tingweiz@quicinc.com>,
	Mao Jinlong <quic_jinlmao@quicinc.com>,
	Yuanfang Zhang <quic_yuanfang@quicinc.com>,
	Trilok Soni <quic_tsoni@quicinc.com>
Subject: Re: [PATCH 10/10] ARM: dts: msm: Add TPDA and TPDM support to DTS for RB5
Date: Thu, 4 Nov 2021 09:45:08 +0000	[thread overview]
Message-ID: <a372fe18-e1c8-57cd-8986-b4d6dbca091b@arm.com> (raw)
In-Reply-To: <1634801936-15080-11-git-send-email-quic_taozha@quicinc.com>

On 21/10/2021 08:38, Tao Zhang wrote:
> Add TPDA and TPDM support to DTS for RB5 board. This change is a
> sample for validating. After applying this patch, the new TPDM and
> TPDA nodes can be observed at the coresight devices path. TPDM and
> TPDA hardware can be operated by commands.
> 
> List the commands for validating this series patches as below.
> echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
> echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
> echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
> echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
> cat /dev/tmc_etf0 > /data/etf-tpdm0.bin
> echo 0 > /sys/bus/coresight/devices/tpdm0/enable_source
> echo 0 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
> echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
> echo 1 > /sys/bus/coresight/devices/tpdm1/enable_source
> echo 1 > /sys/bus/coresight/devices/tpdm1/integration_test
> echo 2 > /sys/bus/coresight/devices/tpdm1/integration_test
> cat /dev/tmc_etf0 > /data/etf-tpdm1.bin
> echo 0 > /sys/bus/coresight/devices/tpdm1/enable_source
> echo 0 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
> echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
> echo 1 > /sys/bus/coresight/devices/tpdm2/enable_source
> echo 1 > /sys/bus/coresight/devices/tpdm2/integration_test
> echo 2 > /sys/bus/coresight/devices/tpdm2/integration_test
> cat /dev/tmc_etf0 > /data/etf-tpdm2.bin
> echo 0 > /sys/bus/coresight/devices/tpdm2/enable_source
> echo 0 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
> 

> If the data from TPDMs can be obtained from the ETF, it means
> that the TPDMs verification is successful. At the same time,

How can we decode the TPDM trace ? Is there a public decoder
available ?

> since TPDM0, TPDM1 and TPDM2 are all connected to the same
> funnel "funnel@6c2d000" and output via different output ports,
> it also means that the following patches verification is
> successful.
> coresight: add support to enable more coresight paths
> coresight: funnel: add support for multiple output ports
> 
> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 439 +++++++++++++++++++++++
>   1 file changed, 439 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index 8ac96f8e79d4..bcec8b181e11 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -222,6 +222,445 @@

> +
> +	funnel@6b04000 {
> +		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> +		arm,primecell-periphid = <0x000bb908>;
> +
> +		reg = <0 0x6b04000 0 0x1000>;
> +		reg-names = "funnel-base";
> +
> +		clocks = <&aoss_qmp>;
> +		clock-names = "apb_pclk";
> +
> +		out-ports {
> +			port {
> +				merge_funnel_out: endpoint {
> +					remote-endpoint =
> +						<&etf_in>;
> +				};
> +			};
> +		};
> +
> +		in-ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@7 {
> +				reg = <7>;
> +				swao_funnel_in7: endpoint {

> +					slave-mode;

This is obsolete, with the new in-ports/out-ports construct.

Suzuki