linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "H. Nikolaus Schaller" <hns@goldelico.com>
To: "Paul Cercueil" <paul@crapouillou.net>,
	"Paul Boddie" <paul@boddie.org.uk>,
	"Alex Smith" <alex.smith@imgtec.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Ralf Baechle" <ralf@linux-mips.org>,
	"Paul Burton" <paulburton@kernel.org>,
	"James Hogan" <jhogan@kernel.org>,
	"David Airlie" <airlied@linux.ie>,
	"Daniel Vetter" <daniel@ffwll.ch>,
	"David S. Miller" <davem@davemloft.net>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"H. Nikolaus Schaller" <hns@goldelico.com>,
	"Andi Kleen" <ak@linux.intel.com>,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	"Geert Uytterhoeven" <geert+renesas@glider.be>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Petr Štetiar" <ynezz@true.cz>,
	"Richard Fontana" <rfontana@redhat.com>,
	"Allison Randal" <allison@lohutok.net>,
	"Stephen Boyd" <swboyd@chromium.org>
Cc: devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-i2c@vger.kernel.org, netdev@vger.kernel.org,
	linux-gpio@vger.kernel.org, letux-kernel@openphoenux.org,
	kernel@pyra-handheld.com
Subject: [PATCH 07/14] MIPS: DTS: CI20: fix PMU definitions for ACT8600
Date: Tue, 11 Feb 2020 22:41:24 +0100	[thread overview]
Message-ID: <aa9725056a1d2bfb490a1c912f34302de0e27fad.1581457290.git.hns@goldelico.com> (raw)
In-Reply-To: <cover.1581457290.git.hns@goldelico.com>

There is a ACT8600 on the CI20 board and the bindings of the
ACT8865 driver have changed without updating the CI20 device
tree. Therefore the PMU can not be probed successfully and
is running in power-on reset state.

Fix DT to match the latest act8865-regulator bindings.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 arch/mips/boot/dts/ingenic/ci20.dts | 48 ++++++++++++++++++++---------
 1 file changed, 33 insertions(+), 15 deletions(-)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 37b93166bf22..e02a19db7ef1 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -148,6 +148,8 @@
 	pinctrl-0 = <&pins_uart4>;
 };
 
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
+
 &i2c0 {
 	status = "okay";
 
@@ -161,65 +163,81 @@
 		reg = <0x5a>;
 		status = "okay";
 
+/*
+Optional input supply properties:
+- for act8600:
+  - vp1-supply: The input supply for DCDC_REG1
+  - vp2-supply: The input supply for DCDC_REG2
+  - vp3-supply: The input supply for DCDC_REG3
+  - inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8
+  SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies.
+*/
+
 		regulators {
 			vddcore: SUDCDC1 {
-				regulator-name = "VDDCORE";
+				regulator-name = "DCDC_REG1";
 				regulator-min-microvolt = <1100000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 			};
 			vddmem: SUDCDC2 {
-				regulator-name = "VDDMEM";
+				regulator-name = "DCDC_REG2";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 			};
 			vcc_33: SUDCDC3 {
-				regulator-name = "VCC33";
+				regulator-name = "DCDC_REG3";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 			vcc_50: SUDCDC4 {
-				regulator-name = "VCC50";
+				regulator-name = "SUDCDC_REG4";
 				regulator-min-microvolt = <5000000>;
 				regulator-max-microvolt = <5000000>;
 				regulator-always-on;
 			};
 			vcc_25: LDO_REG5 {
-				regulator-name = "VCC25";
+				regulator-name = "LDO_REG5";
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <2500000>;
 				regulator-always-on;
 			};
 			wifi_io: LDO_REG6 {
-				regulator-name = "WIFIIO";
+				regulator-name = "LDO_REG6";
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <2500000>;
 				regulator-always-on;
 			};
 			vcc_28: LDO_REG7 {
-				regulator-name = "VCC28";
+				regulator-name = "LDO_REG7";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 				regulator-always-on;
 			};
 			vcc_15: LDO_REG8 {
-				regulator-name = "VCC15";
+				regulator-name = "LDO_REG8";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 			};
-			vcc_18: LDO_REG9 {
-				regulator-name = "VCC18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
+			vrtc_18: LDO_REG9 {
+				regulator-name = "LDO_REG9";
+				/* Despite the datasheet stating 3.3V for REG9 and
+				   driver expecting that, REG9 outputs 1.8V.
+				   Likely the CI20 uses a chip variant.
+				   Since it is a simple on/off LDO the exact values
+				   do not matter.
+				*/
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 			vcc_11: LDO_REG10 {
-				regulator-name = "VCC11";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
+				regulator-name = "LDO_REG10";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 			};
 		};
-- 
2.23.0


  parent reply	other threads:[~2020-02-11 21:43 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-11 21:41 [PATCH 00/14] MIPS: Fixes and improvements for CI20 board (JZ4780) H. Nikolaus Schaller
2020-02-11 21:41 ` [PATCH 01/14] i2c: jz4780: suppress txabrt reports for i2cdetect H. Nikolaus Schaller
2020-02-12  9:46   ` i2c: jz4780: silence log flood on txabrt Wolfram Sang
2020-02-12 14:46     ` H. Nikolaus Schaller
2020-02-12 14:53       ` Wolfram Sang
2020-02-12 14:59         ` H. Nikolaus Schaller
2020-02-13  9:10     ` Wolfram Sang
2020-02-11 21:41 ` [PATCH 02/14] drm: ingenic-drm: add MODULE_DEVICE_TABLE H. Nikolaus Schaller
2020-02-11 21:41 ` [PATCH 03/14] net: davicom: dm9000: allow to pass MAC address through mac_addr module parameter H. Nikolaus Schaller
2020-02-11 22:25   ` Andrew Lunn
2020-02-12  8:07     ` Geert Uytterhoeven
2020-02-12  8:13       ` H. Nikolaus Schaller
2020-02-11 21:41 ` [PATCH 04/14] MIPS: DTS: jz4780: fix #includes for irq.h and gpio.h H. Nikolaus Schaller
2020-02-11 21:41 ` [PATCH 05/14] MIPS: CI20: defconfig: configure for supporting modules H. Nikolaus Schaller
2020-02-11 21:41 ` [PATCH 06/14] MIPS: CI20: defconfig: compile leds-gpio driver into the kernel and configure for LED triggers H. Nikolaus Schaller
2020-02-11 21:41 ` H. Nikolaus Schaller [this message]
2020-02-11 21:48   ` [Letux-kernel] [PATCH 07/14] MIPS: DTS: CI20: fix PMU definitions for ACT8600 Andreas Kemnade
2020-02-11 21:41 ` [PATCH 08/14] MIPS: CI20: defconfig: configure CONFIG_REGULATOR_ACT8865 for PMU H. Nikolaus Schaller
2020-02-11 21:41 ` [PATCH 09/14] MIPS: DTS: CI20: give eth0_power a defined voltage H. Nikolaus Schaller
2020-02-11 21:41 ` [PATCH 10/14] MIPS: DTS: CI20: add DT node for IR sensor H. Nikolaus Schaller
2020-02-11 21:41 ` [PATCH 11/14] MIPS: CI20: defconfig: compile gpio-ir driver H. Nikolaus Schaller
2020-02-11 21:41 ` [PATCH 12/14] MIPS: DTS: CI20: add DT node for SW1 as Enter button H. Nikolaus Schaller
2020-02-11 21:41 ` [PATCH 13/14] MIPS: CI20: defconfig: configure for CONFIG_KEYBOARD_GPIO=m H. Nikolaus Schaller
2020-02-11 21:41 ` [PATCH 14/14] MIPS: DTS: CI20: fix interrupt for pcf8563 RTC H. Nikolaus Schaller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aa9725056a1d2bfb490a1c912f34302de0e27fad.1581457290.git.hns@goldelico.com \
    --to=hns@goldelico.com \
    --cc=airlied@linux.ie \
    --cc=ak@linux.intel.com \
    --cc=alex.smith@imgtec.com \
    --cc=allison@lohutok.net \
    --cc=daniel@ffwll.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert+renesas@glider.be \
    --cc=jhogan@kernel.org \
    --cc=kernel@pyra-handheld.com \
    --cc=krzk@kernel.org \
    --cc=letux-kernel@openphoenux.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=netdev@vger.kernel.org \
    --cc=paul@boddie.org.uk \
    --cc=paul@crapouillou.net \
    --cc=paulburton@kernel.org \
    --cc=ralf@linux-mips.org \
    --cc=rfontana@redhat.com \
    --cc=robh+dt@kernel.org \
    --cc=swboyd@chromium.org \
    --cc=ynezz@true.cz \
    --subject='Re: [PATCH 07/14] MIPS: DTS: CI20: fix PMU definitions for ACT8600' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).