* [PATCH v2 1/3] scsi: ufshcd: Update the set frequency to devfreq
[not found] <cover.1585160616.git.asutoshd@codeaurora.org>
@ 2020-03-25 18:29 ` Asutosh Das
2020-05-25 22:19 ` Jeffrey Hugo
2020-03-25 18:29 ` [PATCH v2 2/3] scsi: ufshcd: Let vendor override devfreq parameters Asutosh Das
2020-03-25 18:29 ` [PATCH v2 3/3] scsi: ufs-qcom: Override " Asutosh Das
2 siblings, 1 reply; 6+ messages in thread
From: Asutosh Das @ 2020-03-25 18:29 UTC (permalink / raw)
To: Avri.Altman, cang, martin.petersen, linux-scsi
Cc: Asutosh Das, linux-arm-msm, Alim Akhtar, Avri Altman,
James E.J. Bottomley, Stanley Chu, Bean Huo, Bart Van Assche,
Venkat Gopalakrishnan, Tomas Winkler, open list
Currently, the frequency that devfreq provides the
driver to set always leads the clocks to be scaled up.
Hence, round the clock-rate to the nearest frequency
before deciding to scale.
Also update the devfreq statistics of current frequency.
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 2a2a63b..7916c8b 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1187,6 +1187,9 @@ static int ufshcd_devfreq_target(struct device *dev,
if (!ufshcd_is_clkscaling_supported(hba))
return -EINVAL;
+ clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info, list);
+ /* Override with the closest supported frequency */
+ *freq = (unsigned long) clk_round_rate(clki->clk, *freq);
spin_lock_irqsave(hba->host->host_lock, irq_flags);
if (ufshcd_eh_in_progress(hba)) {
spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
@@ -1201,8 +1204,11 @@ static int ufshcd_devfreq_target(struct device *dev,
goto out;
}
- clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info, list);
+ /* Decide based on the rounded-off frequency and update */
scale_up = (*freq == clki->max_freq) ? true : false;
+ if (!scale_up)
+ *freq = clki->min_freq;
+ /* Update the frequency */
if (!ufshcd_is_devfreq_scaling_required(hba, scale_up)) {
spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
ret = 0;
@@ -1250,6 +1256,8 @@ static int ufshcd_devfreq_get_dev_status(struct device *dev,
struct ufs_hba *hba = dev_get_drvdata(dev);
struct ufs_clk_scaling *scaling = &hba->clk_scaling;
unsigned long flags;
+ struct list_head *clk_list = &hba->clk_list_head;
+ struct ufs_clk_info *clki;
if (!ufshcd_is_clkscaling_supported(hba))
return -EINVAL;
@@ -1260,6 +1268,13 @@ static int ufshcd_devfreq_get_dev_status(struct device *dev,
if (!scaling->window_start_t)
goto start_window;
+ clki = list_first_entry(clk_list, struct ufs_clk_info, list);
+ /*
+ * If current frequency is 0, then the ondemand governor considers
+ * there's no initial frequency set. And it always requests to set
+ * to max. frequency.
+ */
+ stat->current_frequency = clki->curr_freq;
if (scaling->is_busy_started)
scaling->tot_busy_t += ktime_to_us(ktime_sub(ktime_get(),
scaling->busy_start_t));
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v2 1/3] scsi: ufshcd: Update the set frequency to devfreq
2020-03-25 18:29 ` [PATCH v2 1/3] scsi: ufshcd: Update the set frequency to devfreq Asutosh Das
@ 2020-05-25 22:19 ` Jeffrey Hugo
2020-05-26 17:17 ` Asutosh Das (asd)
0 siblings, 1 reply; 6+ messages in thread
From: Jeffrey Hugo @ 2020-05-25 22:19 UTC (permalink / raw)
To: Asutosh Das
Cc: Avri Altman, Can Guo, Martin K. Petersen, linux-scsi, MSM,
Alim Akhtar, James E.J. Bottomley, Stanley Chu, Bean Huo,
Bart Van Assche, Venkat Gopalakrishnan, Tomas Winkler, open list
On Wed, Mar 25, 2020 at 12:29 PM Asutosh Das <asutoshd@codeaurora.org> wrote:
>
> Currently, the frequency that devfreq provides the
> driver to set always leads the clocks to be scaled up.
> Hence, round the clock-rate to the nearest frequency
> before deciding to scale.
>
> Also update the devfreq statistics of current frequency.
>
> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
This change appears to cause issues for the Lenovo Miix 630, as
identified by git bisect.
On 5.6-final, My boot log looks normal. On 5.7-rc7, the Lenovo Miix
630 rarely boots, usually stuck in some kind of infinite printk loop.
If I disable some of the UFS logging, I can capture this from the
logs, as soon as UFS inits -
[ 4.353860] ufshcd-qcom 1da4000.ufshc: ufshcd_intr: Unhandled
interrupt 0x00000000
[ 4.359605] ufshcd-qcom 1da4000.ufshc: ufshcd_intr: Unhandled
interrupt 0x00000000
[ 4.365412] ufshcd-qcom 1da4000.ufshc: ufshcd_check_errors:
saved_err 0x4 saved_uic_err 0x2
[ 4.371121] ufshcd-qcom 1da4000.ufshc: hba->ufs_version = 0x210,
hba->capabilities = 0x1587001f
[ 4.376846] ufshcd-qcom 1da4000.ufshc: hba->outstanding_reqs =
0x100000, hba->outstanding_tasks = 0x0
[ 4.382636] ufshcd-qcom 1da4000.ufshc: last_hibern8_exit_tstamp at
0 us, hibern8_exit_cnt = 0
[ 4.388368] ufshcd-qcom 1da4000.ufshc: No record of pa_err
[ 4.394001] ufshcd-qcom 1da4000.ufshc: dl_err[0] = 0x80000001 at 3873626 us
[ 4.399577] ufshcd-qcom 1da4000.ufshc: No record of nl_err
[ 4.405053] ufshcd-qcom 1da4000.ufshc: No record of tl_err
[ 4.410464] ufshcd-qcom 1da4000.ufshc: No record of dme_err
[ 4.415747] ufshcd-qcom 1da4000.ufshc: No record of auto_hibern8_err
[ 4.420950] ufshcd-qcom 1da4000.ufshc: No record of fatal_err
[ 4.426013] ufshcd-qcom 1da4000.ufshc: No record of link_startup_fail
[ 4.430950] ufshcd-qcom 1da4000.ufshc: No record of resume_fail
[ 4.435786] ufshcd-qcom 1da4000.ufshc: No record of suspend_fail
[ 4.440538] ufshcd-qcom 1da4000.ufshc: dev_reset[0] = 0x0 at 3031009 us
[ 4.445199] ufshcd-qcom 1da4000.ufshc: No record of host_reset
[ 4.449750] ufshcd-qcom 1da4000.ufshc: No record of task_abort
[ 4.454214] ufshcd-qcom 1da4000.ufshc: clk: core_clk, rate: 50000000
[ 4.458590] ufshcd-qcom 1da4000.ufshc: clk: core_clk_unipro, rate: 37500000
I don't understand how this change is breaking things, but it clearly is for me.
What kind of additional data would be useful to get to the bottom of this?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/3] scsi: ufshcd: Update the set frequency to devfreq
2020-05-25 22:19 ` Jeffrey Hugo
@ 2020-05-26 17:17 ` Asutosh Das (asd)
2020-05-28 13:53 ` Jeffrey Hugo
0 siblings, 1 reply; 6+ messages in thread
From: Asutosh Das (asd) @ 2020-05-26 17:17 UTC (permalink / raw)
To: Jeffrey Hugo, c_vkoul, hongwus
Cc: Avri Altman, Can Guo, Martin K. Petersen, linux-scsi, MSM,
Alim Akhtar, James E.J. Bottomley, Stanley Chu, Bean Huo,
Bart Van Assche, Venkat Gopalakrishnan, Tomas Winkler, open list
Hi Jeffrey
On 5/25/2020 3:19 PM, Jeffrey Hugo wrote:
> On Wed, Mar 25, 2020 at 12:29 PM Asutosh Das <asutoshd@codeaurora.org> wrote:
>>
>> Currently, the frequency that devfreq provides the
>> driver to set always leads the clocks to be scaled up.
>> Hence, round the clock-rate to the nearest frequency
>> before deciding to scale.
>>
>> Also update the devfreq statistics of current frequency.
>>
>> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
>
> This change appears to cause issues for the Lenovo Miix 630, as
> identified by git bisect.
>
Thanks for reporting this.
> On 5.6-final, My boot log looks normal. On 5.7-rc7, the Lenovo Miix
> 630 rarely boots, usually stuck in some kind of infinite printk loop.
>
> If I disable some of the UFS logging, I can capture this from the
> logs, as soon as UFS inits -
>
> [ 4.353860] ufshcd-qcom 1da4000.ufshc: ufshcd_intr: Unhandled
> interrupt 0x00000000
> [ 4.359605] ufshcd-qcom 1da4000.ufshc: ufshcd_intr: Unhandled
> interrupt 0x00000000
> [ 4.365412] ufshcd-qcom 1da4000.ufshc: ufshcd_check_errors:
> saved_err 0x4 saved_uic_err 0x2
> [ 4.371121] ufshcd-qcom 1da4000.ufshc: hba->ufs_version = 0x210,
> hba->capabilities = 0x1587001f
> [ 4.376846] ufshcd-qcom 1da4000.ufshc: hba->outstanding_reqs =
> 0x100000, hba->outstanding_tasks = 0x0
> [ 4.382636] ufshcd-qcom 1da4000.ufshc: last_hibern8_exit_tstamp at
> 0 us, hibern8_exit_cnt = 0
> [ 4.388368] ufshcd-qcom 1da4000.ufshc: No record of pa_err
> [ 4.394001] ufshcd-qcom 1da4000.ufshc: dl_err[0] = 0x80000001 at 3873626 us
> [ 4.399577] ufshcd-qcom 1da4000.ufshc: No record of nl_err
> [ 4.405053] ufshcd-qcom 1da4000.ufshc: No record of tl_err
> [ 4.410464] ufshcd-qcom 1da4000.ufshc: No record of dme_err
> [ 4.415747] ufshcd-qcom 1da4000.ufshc: No record of auto_hibern8_err
> [ 4.420950] ufshcd-qcom 1da4000.ufshc: No record of fatal_err
> [ 4.426013] ufshcd-qcom 1da4000.ufshc: No record of link_startup_fail
> [ 4.430950] ufshcd-qcom 1da4000.ufshc: No record of resume_fail
> [ 4.435786] ufshcd-qcom 1da4000.ufshc: No record of suspend_fail
> [ 4.440538] ufshcd-qcom 1da4000.ufshc: dev_reset[0] = 0x0 at 3031009 us
> [ 4.445199] ufshcd-qcom 1da4000.ufshc: No record of host_reset
> [ 4.449750] ufshcd-qcom 1da4000.ufshc: No record of task_abort
> [ 4.454214] ufshcd-qcom 1da4000.ufshc: clk: core_clk, rate: 50000000
> [ 4.458590] ufshcd-qcom 1da4000.ufshc: clk: core_clk_unipro, rate: 37500000
>
> I don't understand how this change is breaking things, but it clearly is for me.
>
> What kind of additional data would be useful to get to the bottom of this?
>
++
Let me take a look and get back on this.
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/3] scsi: ufshcd: Update the set frequency to devfreq
2020-05-26 17:17 ` Asutosh Das (asd)
@ 2020-05-28 13:53 ` Jeffrey Hugo
0 siblings, 0 replies; 6+ messages in thread
From: Jeffrey Hugo @ 2020-05-28 13:53 UTC (permalink / raw)
To: Asutosh Das (asd)
Cc: c_vkoul, hongwus, Avri Altman, Can Guo, Martin K. Petersen,
linux-scsi, MSM, Alim Akhtar, James E.J. Bottomley, Stanley Chu,
Bean Huo, Bart Van Assche, Venkat Gopalakrishnan, Tomas Winkler,
open list
On Tue, May 26, 2020 at 11:17 AM Asutosh Das (asd)
<asutoshd@codeaurora.org> wrote:
>
> Hi Jeffrey
> On 5/25/2020 3:19 PM, Jeffrey Hugo wrote:
> > On Wed, Mar 25, 2020 at 12:29 PM Asutosh Das <asutoshd@codeaurora.org> wrote:
> >>
> >> Currently, the frequency that devfreq provides the
> >> driver to set always leads the clocks to be scaled up.
> >> Hence, round the clock-rate to the nearest frequency
> >> before deciding to scale.
> >>
> >> Also update the devfreq statistics of current frequency.
> >>
> >> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
> >
> > This change appears to cause issues for the Lenovo Miix 630, as
> > identified by git bisect.
> >
>
> Thanks for reporting this.
>
> > On 5.6-final, My boot log looks normal. On 5.7-rc7, the Lenovo Miix
> > 630 rarely boots, usually stuck in some kind of infinite printk loop.
> >
> > If I disable some of the UFS logging, I can capture this from the
> > logs, as soon as UFS inits -
> >
> > [ 4.353860] ufshcd-qcom 1da4000.ufshc: ufshcd_intr: Unhandled
> > interrupt 0x00000000
> > [ 4.359605] ufshcd-qcom 1da4000.ufshc: ufshcd_intr: Unhandled
> > interrupt 0x00000000
> > [ 4.365412] ufshcd-qcom 1da4000.ufshc: ufshcd_check_errors:
> > saved_err 0x4 saved_uic_err 0x2
> > [ 4.371121] ufshcd-qcom 1da4000.ufshc: hba->ufs_version = 0x210,
> > hba->capabilities = 0x1587001f
> > [ 4.376846] ufshcd-qcom 1da4000.ufshc: hba->outstanding_reqs =
> > 0x100000, hba->outstanding_tasks = 0x0
> > [ 4.382636] ufshcd-qcom 1da4000.ufshc: last_hibern8_exit_tstamp at
> > 0 us, hibern8_exit_cnt = 0
> > [ 4.388368] ufshcd-qcom 1da4000.ufshc: No record of pa_err
> > [ 4.394001] ufshcd-qcom 1da4000.ufshc: dl_err[0] = 0x80000001 at 3873626 us
> > [ 4.399577] ufshcd-qcom 1da4000.ufshc: No record of nl_err
> > [ 4.405053] ufshcd-qcom 1da4000.ufshc: No record of tl_err
> > [ 4.410464] ufshcd-qcom 1da4000.ufshc: No record of dme_err
> > [ 4.415747] ufshcd-qcom 1da4000.ufshc: No record of auto_hibern8_err
> > [ 4.420950] ufshcd-qcom 1da4000.ufshc: No record of fatal_err
> > [ 4.426013] ufshcd-qcom 1da4000.ufshc: No record of link_startup_fail
> > [ 4.430950] ufshcd-qcom 1da4000.ufshc: No record of resume_fail
> > [ 4.435786] ufshcd-qcom 1da4000.ufshc: No record of suspend_fail
> > [ 4.440538] ufshcd-qcom 1da4000.ufshc: dev_reset[0] = 0x0 at 3031009 us
> > [ 4.445199] ufshcd-qcom 1da4000.ufshc: No record of host_reset
> > [ 4.449750] ufshcd-qcom 1da4000.ufshc: No record of task_abort
> > [ 4.454214] ufshcd-qcom 1da4000.ufshc: clk: core_clk, rate: 50000000
> > [ 4.458590] ufshcd-qcom 1da4000.ufshc: clk: core_clk_unipro, rate: 37500000
> >
> > I don't understand how this change is breaking things, but it clearly is for me.
> >
> > What kind of additional data would be useful to get to the bottom of this?
> >
It turns out that the unipro_core clock had no parent, and thus no
ability to scale. Fixing that in GCC seems to have resolved this. I
suspect the UFS clock scaling code attempted to scale the core clock,
didn't check that the clock could change rates, and went along
assuming the new rate was effective, thus putting the hardware into a
bad state.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 2/3] scsi: ufshcd: Let vendor override devfreq parameters
[not found] <cover.1585160616.git.asutoshd@codeaurora.org>
2020-03-25 18:29 ` [PATCH v2 1/3] scsi: ufshcd: Update the set frequency to devfreq Asutosh Das
@ 2020-03-25 18:29 ` Asutosh Das
2020-03-25 18:29 ` [PATCH v2 3/3] scsi: ufs-qcom: Override " Asutosh Das
2 siblings, 0 replies; 6+ messages in thread
From: Asutosh Das @ 2020-03-25 18:29 UTC (permalink / raw)
To: Avri.Altman, cang, martin.petersen, linux-scsi
Cc: Asutosh Das, linux-arm-msm, Alim Akhtar, Avri Altman,
James E.J. Bottomley, Stanley Chu, Bean Huo, Bart Van Assche,
Venkat Gopalakrishnan, Tomas Winkler, Bjorn Andersson, open list
Vendor drivers may have a need to update the polling interval
and thresholds.
Provide a vops for vendor drivers to use.
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 15 ++++++++++++++-
drivers/scsi/ufs/ufshcd.h | 12 ++++++++++++
2 files changed, 26 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 7916c8b..61e8974 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1303,6 +1303,17 @@ static struct devfreq_dev_profile ufs_devfreq_profile = {
.get_dev_status = ufshcd_devfreq_get_dev_status,
};
+#if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND)
+static struct devfreq_simple_ondemand_data ufs_ondemand_data = {
+ .upthreshold = 70,
+ .downdifferential = 5,
+};
+
+static void *gov_data = &ufs_ondemand_data;
+#else
+static void *gov_data = NULL;
+#endif
+
static int ufshcd_devfreq_init(struct ufs_hba *hba)
{
struct list_head *clk_list = &hba->clk_list_head;
@@ -1318,10 +1329,12 @@ static int ufshcd_devfreq_init(struct ufs_hba *hba)
dev_pm_opp_add(hba->dev, clki->min_freq, 0);
dev_pm_opp_add(hba->dev, clki->max_freq, 0);
+ ufshcd_vops_config_scaling_param(hba, &ufs_devfreq_profile,
+ gov_data);
devfreq = devfreq_add_device(hba->dev,
&ufs_devfreq_profile,
DEVFREQ_GOV_SIMPLE_ONDEMAND,
- NULL);
+ gov_data);
if (IS_ERR(devfreq)) {
ret = PTR_ERR(devfreq);
dev_err(hba->dev, "Unable to register with devfreq %d\n", ret);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index d45a044..e8e8ee2 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -56,6 +56,7 @@
#include <linux/completion.h>
#include <linux/regulator/consumer.h>
#include <linux/bitfield.h>
+#include <linux/devfreq.h>
#include "unipro.h"
#include <asm/irq.h>
@@ -327,6 +328,9 @@ struct ufs_hba_variant_ops {
void (*dbg_register_dump)(struct ufs_hba *hba);
int (*phy_initialization)(struct ufs_hba *);
void (*device_reset)(struct ufs_hba *hba);
+ void (*config_scaling_param)(struct ufs_hba *hba,
+ struct devfreq_dev_profile *profile,
+ void *data);
};
/* clock gating state */
@@ -1083,6 +1087,14 @@ static inline void ufshcd_vops_device_reset(struct ufs_hba *hba)
}
}
+static inline void ufshcd_vops_config_scaling_param(struct ufs_hba *hba,
+ struct devfreq_dev_profile
+ *profile, void *data)
+{
+ if (hba->vops && hba->vops->config_scaling_param)
+ hba->vops->config_scaling_param(hba, profile, data);
+}
+
extern struct ufs_pm_lvl_states ufs_pm_lvl_states[];
/*
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 3/3] scsi: ufs-qcom: Override devfreq parameters
[not found] <cover.1585160616.git.asutoshd@codeaurora.org>
2020-03-25 18:29 ` [PATCH v2 1/3] scsi: ufshcd: Update the set frequency to devfreq Asutosh Das
2020-03-25 18:29 ` [PATCH v2 2/3] scsi: ufshcd: Let vendor override devfreq parameters Asutosh Das
@ 2020-03-25 18:29 ` Asutosh Das
2 siblings, 0 replies; 6+ messages in thread
From: Asutosh Das @ 2020-03-25 18:29 UTC (permalink / raw)
To: Avri.Altman, cang, martin.petersen, linux-scsi
Cc: Asutosh Das, linux-arm-msm, Andy Gross, Bjorn Andersson,
Alim Akhtar, Avri Altman, James E.J. Bottomley, open list
Override devfreq parameters for power-performance
trade-off.
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
---
drivers/scsi/ufs/ufs-qcom.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 6115ac6..19aa5c4 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -10,6 +10,7 @@
#include <linux/phy/phy.h>
#include <linux/gpio/consumer.h>
#include <linux/reset-controller.h>
+#include <linux/devfreq.h>
#include "ufshcd.h"
#include "ufshcd-pltfrm.h"
@@ -1689,6 +1690,29 @@ static void ufs_qcom_device_reset(struct ufs_hba *hba)
usleep_range(10, 15);
}
+#if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND)
+static void ufs_qcom_config_scaling_param(struct ufs_hba *hba,
+ struct devfreq_dev_profile *p,
+ void *data)
+{
+ static struct devfreq_simple_ondemand_data *d;
+
+ if (!data)
+ return;
+
+ d = (struct devfreq_simple_ondemand_data *)data;
+ p->polling_ms = 60;
+ d->upthreshold = 70;
+ d->downdifferential = 5;
+}
+#else
+static void ufs_qcom_config_scaling_param(struct ufs_hba *hba,
+ struct devfreq_dev_profile *p,
+ void *data)
+{
+}
+#endif
+
/**
* struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
*
@@ -1710,6 +1734,7 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
.resume = ufs_qcom_resume,
.dbg_register_dump = ufs_qcom_dump_dbg_regs,
.device_reset = ufs_qcom_device_reset,
+ .config_scaling_param = ufs_qcom_config_scaling_param,
};
/**
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply related [flat|nested] 6+ messages in thread