* [PATCH] ARM: BCM5301X: Enable UART by default for BCM4708(1) and BCM4709(4)
@ 2016-11-28 14:01 Rafał Miłecki
[not found] ` <CAC3K-4o3-eSDU5JvjkgohtWLUmZqQViHvX1h2zfdPAGe+qbCOg@mail.gmail.com>
2016-12-01 17:40 ` [PATCH dt V2] ARM: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012 Rafał Miłecki
0 siblings, 2 replies; 5+ messages in thread
From: Rafał Miłecki @ 2016-11-28 14:01 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rob Herring, Mark Rutland, Russell King, Hauke Mehrtens,
bcm-kernel-feedback-list, devicetree, linux-arm-kernel,
linux-kernel, Rafał Miłecki
From: Rafał Miłecki <rafal@milecki.pl>
Every device tested so far got UART0 (at 0x18000300) working as serial
console. It's most likely part of reference design and all vendors use
it that way.
It seems to be easier to enable it by default and just disable it if we
ever see a device with different hardware design.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ----
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 ----
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 ----
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ----
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 ----
arch/arm/boot/dts/bcm4708.dtsi | 4 ++++
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ----
arch/arm/boot/dts/bcm47081.dtsi | 4 ++++
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 ----
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 ----
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 ----
arch/arm/boot/dts/bcm4709.dtsi | 1 +
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ----
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 4 ----
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 ----
arch/arm/boot/dts/bcm47094.dtsi | 1 +
16 files changed, 10 insertions(+), 48 deletions(-)
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 9cb186e..d49afec0 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -136,10 +136,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb2 {
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
index 35e6ed6..f591b0f 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -55,10 +55,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index 1c7e53d..50d65d8 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -56,10 +56,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 8ce39d5..8519548 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -83,10 +83,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb3 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 70f4bb9..74cfcd3 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -119,10 +119,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
index eed4dd1..d0eec09 100644
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -34,3 +34,7 @@
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index a9c8def..2922536 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -122,7 +122,3 @@
};
};
};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi
index f720012..c5f7619 100644
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ b/arch/arm/boot/dts/bcm47081.dtsi
@@ -24,3 +24,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index fd38d2a..0225d82 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -100,7 +100,3 @@
};
};
};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 92f8a72..56d38a3 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -107,10 +107,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb2 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index 9a92c24..c67bfaa 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -97,10 +97,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi
index f039765..c645fea 100644
--- a/arch/arm/boot/dts/bcm4709.dtsi
+++ b/arch/arm/boot/dts/bcm4709.dtsi
@@ -8,4 +8,5 @@
&uart0 {
clock-frequency = <125000000>;
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 661348d..7fb9270 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -105,10 +105,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index 169b35f..2f4a651 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -98,10 +98,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index 521b415..7ecd57c 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -97,7 +97,3 @@
};
};
};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index 4f09aa0..4840a78 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -14,4 +14,5 @@
&uart0 {
clock-frequency = <125000000>;
+ status = "okay";
};
--
2.10.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] ARM: BCM5301X: Enable UART by default for BCM4708(1) and BCM4709(4)
[not found] ` <CAC3K-4o3-eSDU5JvjkgohtWLUmZqQViHvX1h2zfdPAGe+qbCOg@mail.gmail.com>
@ 2016-12-01 17:23 ` Rafał Miłecki
0 siblings, 0 replies; 5+ messages in thread
From: Rafał Miłecki @ 2016-12-01 17:23 UTC (permalink / raw)
To: Jon Mason
Cc: Florian Fainelli, Rob Herring, Mark Rutland, Russell King,
Hauke Mehrtens, BCM Kernel Feedback,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, open list, Rafał Miłecki
On 1 December 2016 at 18:14, Jon Mason <jon.mason@broadcom.com> wrote:
> On Mon, Nov 28, 2016 at 9:01 AM, Rafał Miłecki <zajec5@gmail.com> wrote:
>>
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> Every device tested so far got UART0 (at 0x18000300) working as serial
>> console. It's most likely part of reference design and all vendors use
>> it that way.
>>
>> It seems to be easier to enable it by default and just disable it if we
>> ever see a device with different hardware design.
>>
>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>> ---
>> arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ----
>> arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 ----
>> arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 ----
>> arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ----
>> arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 ----
>> arch/arm/boot/dts/bcm4708.dtsi | 4 ++++
>> arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ----
>> arch/arm/boot/dts/bcm47081.dtsi | 4 ++++
>> arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 ----
>> arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 ----
>> arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 ----
>> arch/arm/boot/dts/bcm4709.dtsi | 1 +
>> arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ----
>> arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 4 ----
>> arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 ----
>> arch/arm/boot/dts/bcm47094.dtsi | 1 +
>
>
> I think there are a few missing here. A quick grep shows
>
> $ grep -rI '#include "bcm470[89].dtsi"' arch/arm/boot/dts/*.dts
> arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts:#include "bcm4708.dtsi"
> arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts:#include "bcm4708.dtsi"
> arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts:#include "bcm4708.dtsi"
> arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts:#include "bcm4708.dtsi"
> arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts:#include "bcm4708.dtsi"
> arch/arm/boot/dts/bcm4708-netgear-r6250.dts:#include "bcm4708.dtsi"
> arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts:#include "bcm4708.dtsi"
> arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts:#include "bcm4708.dtsi"
> arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts:#include "bcm4709.dtsi"
> arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts:#include "bcm4709.dtsi"
> arch/arm/boot/dts/bcm4709-netgear-r7000.dts:#include "bcm4709.dtsi"
> arch/arm/boot/dts/bcm4709-netgear-r8000.dts:#include "bcm4709.dtsi"
> arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts:#include "bcm4709.dtsi"
> arch/arm/boot/dts/bcm94708.dts:#include "bcm4708.dtsi"
> arch/arm/boot/dts/bcm94709.dts:#include "bcm4708.dtsi"
> arch/arm/boot/dts/bcm953012er.dts:#include "bcm4708.dtsi"
> arch/arm/boot/dts/bcm953012k.dts:#include "bcm4708.dtsi"
>
> I specifically care about the last 4 :)
Actually the only missing ones are the last 4. Other ones (e.g.
bcm4709-buffalo-wxr-1900dhp.dts) never got uart0 enabled so I just
didn't need to modify these files.
I'll send V2 updating last 4 ones as well. Thanks for catching this.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH dt V2] ARM: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012
2016-11-28 14:01 [PATCH] ARM: BCM5301X: Enable UART by default for BCM4708(1) and BCM4709(4) Rafał Miłecki
[not found] ` <CAC3K-4o3-eSDU5JvjkgohtWLUmZqQViHvX1h2zfdPAGe+qbCOg@mail.gmail.com>
@ 2016-12-01 17:40 ` Rafał Miłecki
2016-12-01 18:59 ` Jon Mason
2016-12-04 19:08 ` Hauke Mehrtens
1 sibling, 2 replies; 5+ messages in thread
From: Rafał Miłecki @ 2016-12-01 17:40 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rob Herring, Mark Rutland, Russell King, Hauke Mehrtens,
bcm-kernel-feedback-list, devicetree, linux-arm-kernel,
linux-kernel, Rafał Miłecki
From: Rafał Miłecki <rafal@milecki.pl>
Every device tested so far got UART0 (at 0x18000300) working as serial
console. It's most likely part of reference design and all vendors use
it that way.
It seems to be easier to enable it by default and just disable it if we
ever see a device with different hardware design.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
V2: Update bcm94708.dts bcm94709.dts bcm953012er.dts & bcm953012k.dts
---
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ----
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 ----
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 ----
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ----
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 ----
arch/arm/boot/dts/bcm4708.dtsi | 4 ++++
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ----
arch/arm/boot/dts/bcm47081.dtsi | 4 ++++
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 ----
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 ----
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 ----
arch/arm/boot/dts/bcm4709.dtsi | 1 +
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ----
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 4 ----
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 ----
arch/arm/boot/dts/bcm47094.dtsi | 1 +
arch/arm/boot/dts/bcm94708.dts | 4 ----
arch/arm/boot/dts/bcm94709.dts | 4 ----
arch/arm/boot/dts/bcm953012er.dts | 4 ----
arch/arm/boot/dts/bcm953012k.dts | 1 -
20 files changed, 10 insertions(+), 61 deletions(-)
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 9cb186e..d49afec0 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -136,10 +136,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb2 {
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
index 35e6ed6..f591b0f 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -55,10 +55,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index 1c7e53d..50d65d8 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -56,10 +56,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 8ce39d5..8519548 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -83,10 +83,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb3 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 70f4bb9..74cfcd3 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -119,10 +119,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
index eed4dd1..d0eec09 100644
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -34,3 +34,7 @@
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index a9c8def..2922536 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -122,7 +122,3 @@
};
};
};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi
index f720012..c5f7619 100644
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ b/arch/arm/boot/dts/bcm47081.dtsi
@@ -24,3 +24,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index fd38d2a..0225d82 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -100,7 +100,3 @@
};
};
};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 92f8a72..56d38a3 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -107,10 +107,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb2 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index 9a92c24..c67bfaa 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -97,10 +97,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi
index f039765..c645fea 100644
--- a/arch/arm/boot/dts/bcm4709.dtsi
+++ b/arch/arm/boot/dts/bcm4709.dtsi
@@ -8,4 +8,5 @@
&uart0 {
clock-frequency = <125000000>;
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 661348d..7fb9270 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -105,10 +105,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index 169b35f..2f4a651 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -98,10 +98,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index 521b415..7ecd57c 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -97,7 +97,3 @@
};
};
};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index 4f09aa0..4840a78 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -14,4 +14,5 @@
&uart0 {
clock-frequency = <125000000>;
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
index 251a486..42855a7 100644
--- a/arch/arm/boot/dts/bcm94708.dts
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -50,7 +50,3 @@
reg = <0x00000000 0x08000000>;
};
};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
index b16cac9..95e8be6 100644
--- a/arch/arm/boot/dts/bcm94709.dts
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -50,7 +50,3 @@
reg = <0x00000000 0x08000000>;
};
};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
index 0a9abec..decd86b 100644
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -70,10 +70,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
index 05a985a..bfd9230 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -54,7 +54,6 @@
&uart0 {
clock-frequency = <62499840>;
- status = "okay";
};
&uart1 {
--
2.10.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH dt V2] ARM: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012
2016-12-01 17:40 ` [PATCH dt V2] ARM: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012 Rafał Miłecki
@ 2016-12-01 18:59 ` Jon Mason
2016-12-04 19:08 ` Hauke Mehrtens
1 sibling, 0 replies; 5+ messages in thread
From: Jon Mason @ 2016-12-01 18:59 UTC (permalink / raw)
To: Rafał Miłecki
Cc: Florian Fainelli, Rob Herring, Mark Rutland, Russell King,
Hauke Mehrtens, bcm-kernel-feedback-list, devicetree,
linux-arm-kernel, linux-kernel, Rafał Miłecki
On Thu, Dec 01, 2016 at 06:40:51PM +0100, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> Every device tested so far got UART0 (at 0x18000300) working as serial
> console. It's most likely part of reference design and all vendors use
> it that way.
>
> It seems to be easier to enable it by default and just disable it if we
> ever see a device with different hardware design.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Looks good to me!
Acked-by: Jon Mason <jon.mason@broadcom.com>
> ---
> V2: Update bcm94708.dts bcm94709.dts bcm953012er.dts & bcm953012k.dts
> ---
> arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ----
> arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 ----
> arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 ----
> arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ----
> arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 ----
> arch/arm/boot/dts/bcm4708.dtsi | 4 ++++
> arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ----
> arch/arm/boot/dts/bcm47081.dtsi | 4 ++++
> arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 ----
> arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 ----
> arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 ----
> arch/arm/boot/dts/bcm4709.dtsi | 1 +
> arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ----
> arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 4 ----
> arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 ----
> arch/arm/boot/dts/bcm47094.dtsi | 1 +
> arch/arm/boot/dts/bcm94708.dts | 4 ----
> arch/arm/boot/dts/bcm94709.dts | 4 ----
> arch/arm/boot/dts/bcm953012er.dts | 4 ----
> arch/arm/boot/dts/bcm953012k.dts | 1 -
> 20 files changed, 10 insertions(+), 61 deletions(-)
>
> diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
> index 9cb186e..d49afec0 100644
> --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
> +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
> @@ -136,10 +136,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &usb2 {
> vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
> };
> diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
> index 35e6ed6..f591b0f 100644
> --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
> +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
> @@ -55,10 +55,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &spi_nor {
> status = "okay";
> };
> diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
> index 1c7e53d..50d65d8 100644
> --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
> +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
> @@ -56,10 +56,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &spi_nor {
> status = "okay";
> };
> diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
> index 8ce39d5..8519548 100644
> --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
> +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
> @@ -83,10 +83,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &usb3 {
> vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
> };
> diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
> index 70f4bb9..74cfcd3 100644
> --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
> +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
> @@ -119,10 +119,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &spi_nor {
> status = "okay";
> };
> diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
> index eed4dd1..d0eec09 100644
> --- a/arch/arm/boot/dts/bcm4708.dtsi
> +++ b/arch/arm/boot/dts/bcm4708.dtsi
> @@ -34,3 +34,7 @@
> };
>
> };
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
> index a9c8def..2922536 100644
> --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
> +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
> @@ -122,7 +122,3 @@
> };
> };
> };
> -
> -&uart0 {
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi
> index f720012..c5f7619 100644
> --- a/arch/arm/boot/dts/bcm47081.dtsi
> +++ b/arch/arm/boot/dts/bcm47081.dtsi
> @@ -24,3 +24,7 @@
> };
> };
> };
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
> index fd38d2a..0225d82 100644
> --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
> +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
> @@ -100,7 +100,3 @@
> };
> };
> };
> -
> -&uart0 {
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
> index 92f8a72..56d38a3 100644
> --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
> +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
> @@ -107,10 +107,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &usb2 {
> vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
> };
> diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
> index 9a92c24..c67bfaa 100644
> --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
> +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
> @@ -97,10 +97,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &usb2 {
> vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
> };
> diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi
> index f039765..c645fea 100644
> --- a/arch/arm/boot/dts/bcm4709.dtsi
> +++ b/arch/arm/boot/dts/bcm4709.dtsi
> @@ -8,4 +8,5 @@
>
> &uart0 {
> clock-frequency = <125000000>;
> + status = "okay";
> };
> diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
> index 661348d..7fb9270 100644
> --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
> +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
> @@ -105,10 +105,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &usb3 {
> vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
> };
> diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
> index 169b35f..2f4a651 100644
> --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
> +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
> @@ -98,10 +98,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &usb3 {
> vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
> };
> diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
> index 521b415..7ecd57c 100644
> --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
> +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
> @@ -97,7 +97,3 @@
> };
> };
> };
> -
> -&uart0 {
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
> index 4f09aa0..4840a78 100644
> --- a/arch/arm/boot/dts/bcm47094.dtsi
> +++ b/arch/arm/boot/dts/bcm47094.dtsi
> @@ -14,4 +14,5 @@
>
> &uart0 {
> clock-frequency = <125000000>;
> + status = "okay";
> };
> diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
> index 251a486..42855a7 100644
> --- a/arch/arm/boot/dts/bcm94708.dts
> +++ b/arch/arm/boot/dts/bcm94708.dts
> @@ -50,7 +50,3 @@
> reg = <0x00000000 0x08000000>;
> };
> };
> -
> -&uart0 {
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
> index b16cac9..95e8be6 100644
> --- a/arch/arm/boot/dts/bcm94709.dts
> +++ b/arch/arm/boot/dts/bcm94709.dts
> @@ -50,7 +50,3 @@
> reg = <0x00000000 0x08000000>;
> };
> };
> -
> -&uart0 {
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
> index 0a9abec..decd86b 100644
> --- a/arch/arm/boot/dts/bcm953012er.dts
> +++ b/arch/arm/boot/dts/bcm953012er.dts
> @@ -70,10 +70,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &spi_nor {
> status = "okay";
> };
> diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
> index 05a985a..bfd9230 100644
> --- a/arch/arm/boot/dts/bcm953012k.dts
> +++ b/arch/arm/boot/dts/bcm953012k.dts
> @@ -54,7 +54,6 @@
>
> &uart0 {
> clock-frequency = <62499840>;
> - status = "okay";
> };
>
> &uart1 {
> --
> 2.10.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH dt V2] ARM: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012
2016-12-01 17:40 ` [PATCH dt V2] ARM: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012 Rafał Miłecki
2016-12-01 18:59 ` Jon Mason
@ 2016-12-04 19:08 ` Hauke Mehrtens
1 sibling, 0 replies; 5+ messages in thread
From: Hauke Mehrtens @ 2016-12-04 19:08 UTC (permalink / raw)
To: Rafał Miłecki, Florian Fainelli
Cc: Rob Herring, Mark Rutland, Russell King,
bcm-kernel-feedback-list, devicetree, linux-arm-kernel,
linux-kernel, Rafał Miłecki
On 12/01/2016 06:40 PM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> Every device tested so far got UART0 (at 0x18000300) working as serial
> console. It's most likely part of reference design and all vendors use
> it that way.
I think the last 4 boards are some of the reference boards. ;-)
> It seems to be easier to enable it by default and just disable it if we
> ever see a device with different hardware design.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
> ---
> V2: Update bcm94708.dts bcm94709.dts bcm953012er.dts & bcm953012k.dts
> ---
> arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ----
> arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 ----
> arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 ----
> arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ----
> arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 ----
> arch/arm/boot/dts/bcm4708.dtsi | 4 ++++
> arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ----
> arch/arm/boot/dts/bcm47081.dtsi | 4 ++++
> arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 ----
> arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 ----
> arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 ----
> arch/arm/boot/dts/bcm4709.dtsi | 1 +
> arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ----
> arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 4 ----
> arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 ----
> arch/arm/boot/dts/bcm47094.dtsi | 1 +
> arch/arm/boot/dts/bcm94708.dts | 4 ----
> arch/arm/boot/dts/bcm94709.dts | 4 ----
> arch/arm/boot/dts/bcm953012er.dts | 4 ----
> arch/arm/boot/dts/bcm953012k.dts | 1 -
> 20 files changed, 10 insertions(+), 61 deletions(-)
>
> diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
> index 9cb186e..d49afec0 100644
> --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
> +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
> @@ -136,10 +136,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &usb2 {
> vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
> };
> diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
> index 35e6ed6..f591b0f 100644
> --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
> +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
> @@ -55,10 +55,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &spi_nor {
> status = "okay";
> };
> diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
> index 1c7e53d..50d65d8 100644
> --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
> +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
> @@ -56,10 +56,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &spi_nor {
> status = "okay";
> };
> diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
> index 8ce39d5..8519548 100644
> --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
> +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
> @@ -83,10 +83,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &usb3 {
> vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
> };
> diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
> index 70f4bb9..74cfcd3 100644
> --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
> +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
> @@ -119,10 +119,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &spi_nor {
> status = "okay";
> };
> diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
> index eed4dd1..d0eec09 100644
> --- a/arch/arm/boot/dts/bcm4708.dtsi
> +++ b/arch/arm/boot/dts/bcm4708.dtsi
> @@ -34,3 +34,7 @@
> };
>
> };
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
> index a9c8def..2922536 100644
> --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
> +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
> @@ -122,7 +122,3 @@
> };
> };
> };
> -
> -&uart0 {
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi
> index f720012..c5f7619 100644
> --- a/arch/arm/boot/dts/bcm47081.dtsi
> +++ b/arch/arm/boot/dts/bcm47081.dtsi
> @@ -24,3 +24,7 @@
> };
> };
> };
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
> index fd38d2a..0225d82 100644
> --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
> +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
> @@ -100,7 +100,3 @@
> };
> };
> };
> -
> -&uart0 {
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
> index 92f8a72..56d38a3 100644
> --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
> +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
> @@ -107,10 +107,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &usb2 {
> vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
> };
> diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
> index 9a92c24..c67bfaa 100644
> --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
> +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
> @@ -97,10 +97,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &usb2 {
> vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
> };
> diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi
> index f039765..c645fea 100644
> --- a/arch/arm/boot/dts/bcm4709.dtsi
> +++ b/arch/arm/boot/dts/bcm4709.dtsi
> @@ -8,4 +8,5 @@
>
> &uart0 {
> clock-frequency = <125000000>;
> + status = "okay";
> };
> diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
> index 661348d..7fb9270 100644
> --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
> +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
> @@ -105,10 +105,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &usb3 {
> vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
> };
> diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
> index 169b35f..2f4a651 100644
> --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
> +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
> @@ -98,10 +98,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &usb3 {
> vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
> };
> diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
> index 521b415..7ecd57c 100644
> --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
> +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
> @@ -97,7 +97,3 @@
> };
> };
> };
> -
> -&uart0 {
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
> index 4f09aa0..4840a78 100644
> --- a/arch/arm/boot/dts/bcm47094.dtsi
> +++ b/arch/arm/boot/dts/bcm47094.dtsi
> @@ -14,4 +14,5 @@
>
> &uart0 {
> clock-frequency = <125000000>;
> + status = "okay";
> };
> diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
> index 251a486..42855a7 100644
> --- a/arch/arm/boot/dts/bcm94708.dts
> +++ b/arch/arm/boot/dts/bcm94708.dts
> @@ -50,7 +50,3 @@
> reg = <0x00000000 0x08000000>;
> };
> };
> -
> -&uart0 {
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
> index b16cac9..95e8be6 100644
> --- a/arch/arm/boot/dts/bcm94709.dts
> +++ b/arch/arm/boot/dts/bcm94709.dts
> @@ -50,7 +50,3 @@
> reg = <0x00000000 0x08000000>;
> };
> };
> -
> -&uart0 {
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
> index 0a9abec..decd86b 100644
> --- a/arch/arm/boot/dts/bcm953012er.dts
> +++ b/arch/arm/boot/dts/bcm953012er.dts
> @@ -70,10 +70,6 @@
> };
> };
>
> -&uart0 {
> - status = "okay";
> -};
> -
> &spi_nor {
> status = "okay";
> };
> diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
> index 05a985a..bfd9230 100644
> --- a/arch/arm/boot/dts/bcm953012k.dts
> +++ b/arch/arm/boot/dts/bcm953012k.dts
> @@ -54,7 +54,6 @@
>
> &uart0 {
> clock-frequency = <62499840>;
> - status = "okay";
> };
>
> &uart1 {
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-12-04 19:08 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-11-28 14:01 [PATCH] ARM: BCM5301X: Enable UART by default for BCM4708(1) and BCM4709(4) Rafał Miłecki
[not found] ` <CAC3K-4o3-eSDU5JvjkgohtWLUmZqQViHvX1h2zfdPAGe+qbCOg@mail.gmail.com>
2016-12-01 17:23 ` Rafał Miłecki
2016-12-01 17:40 ` [PATCH dt V2] ARM: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012 Rafał Miłecki
2016-12-01 18:59 ` Jon Mason
2016-12-04 19:08 ` Hauke Mehrtens
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).