linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2] mfd: Add Cherrytrail WhiskeyCove PMIC driver
@ 2017-02-27 21:38 Hans de Goede
  2017-02-27 22:06 ` Andy Shevchenko
  0 siblings, 1 reply; 3+ messages in thread
From: Hans de Goede @ 2017-02-27 21:38 UTC (permalink / raw)
  To: Andy Shevchenko, Lee Jones
  Cc: Hans de Goede, Takashi Iwai, linux-kernel, Bin Gao, Felipe Balbi,
	Andy Shevchenko

Add mfd driver for Intel CHT WhiskeyCove PMIC, based on various non
upstreamed CHT WhiskeyCove PMIC patches. For now this just adds a minimal
version which implements just enough to get ACPI PMIC opregion support to
work, so that suspend/resume will work on machines with this PMIC.

Cc: Bin Gao <bin.gao@intel.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Since this uses plain mfd and not the intel_soc_pmic stuff give it
 its own Kconfig and allow this to be built as a module
-Add missing #include <acpi/acpi_bus.h>
---
 drivers/mfd/Kconfig                |  11 +++
 drivers/mfd/Makefile               |   1 +
 drivers/mfd/intel_soc_pmic_chtwc.c | 176 +++++++++++++++++++++++++++++++++++++
 include/linux/mfd/intel_chtwc.h    |  75 ++++++++++++++++
 4 files changed, 263 insertions(+)
 create mode 100644 drivers/mfd/intel_soc_pmic_chtwc.c
 create mode 100644 include/linux/mfd/intel_chtwc.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 4ce3b6f..98c38aa 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -436,6 +436,17 @@ config INTEL_SOC_PMIC
 	  thermal, charger and related power management functions
 	  on these systems.
 
+config MFD_INTEL_CHT_WC
+	tristate "Support for Intel Cherry Trail Whiskey Cove PMIC"
+	depends on ACPI
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  Select this option to enable support for the Intel Cherry Trail
+	  Whiskey Cove PMIC found on some Intel Cherry Trail systems.
+
 config MFD_INTEL_LPSS
 	tristate
 	select COMMON_CLK
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index dda4d4f..664cb81 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -204,6 +204,7 @@ obj-$(CONFIG_MFD_HI655X_PMIC)   += hi655x-pmic.o
 obj-$(CONFIG_MFD_DLN2)		+= dln2.o
 obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
 obj-$(CONFIG_MFD_SKY81452)	+= sky81452.o
+obj-$(CONFIG_MFD_INTEL_CHT_WC)	+= intel_soc_pmic_chtwc.o
 
 intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
 intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC)	+= intel_soc_pmic_bxtwc.o
diff --git a/drivers/mfd/intel_soc_pmic_chtwc.c b/drivers/mfd/intel_soc_pmic_chtwc.c
new file mode 100644
index 0000000..1d53da6
--- /dev/null
+++ b/drivers/mfd/intel_soc_pmic_chtwc.c
@@ -0,0 +1,176 @@
+/*
+ * MFD core driver for Intel Cherrytrail Whiskey Cove PMIC
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on various non upstream patches to support the CHT Whiskey Cove PMIC:
+ * Copyright (C) 2013-2015 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <acpi/acpi_bus.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel_chtwc.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+/* PMIC device registers */
+#define REG_ADDR_MASK		0xff00
+#define REG_ADDR_SHIFT		8
+#define REG_OFFSET_MASK		0xff
+
+/* Whiskey Cove PMIC share same ACPI ID between different platforms */
+#define CHT_WC_HRV		3
+
+static struct mfd_cell cht_wc_dev[] = {
+	{
+		.name = "cht_wcove_region",
+	},
+};
+
+/*
+ * The CHT Whiskey Cove covers multiple i2c addresses, with a 1 byte
+ * register address space per i2c address, so we use 16 bit register
+ * addresses where the high 8 bits contain the i2c client address.
+ */
+static int cht_wc_byte_reg_read(void *context, unsigned int reg,
+				unsigned int *val)
+{
+	struct i2c_client *client = context;
+	int ret, orig_addr = client->addr;
+
+	if (reg & REG_ADDR_MASK)
+		client->addr = (reg & REG_ADDR_MASK) >> REG_ADDR_SHIFT;
+	else
+		client->addr = CHT_WC_DEVICE1_ADDR;
+	ret = i2c_smbus_read_byte_data(client, reg & REG_OFFSET_MASK);
+	client->addr = orig_addr;
+
+	if (ret < 0)
+		return ret;
+
+	*val = ret;
+	return 0;
+}
+
+static int cht_wc_byte_reg_write(void *context, unsigned int reg,
+				 unsigned int val)
+{
+	struct i2c_client *client = context;
+	int ret, orig_addr = client->addr;
+
+	if (reg & REG_ADDR_MASK)
+		client->addr = (reg & REG_ADDR_MASK) >> REG_ADDR_SHIFT;
+	else
+		client->addr = CHT_WC_DEVICE1_ADDR;
+	ret = i2c_smbus_write_byte_data(client, reg & REG_OFFSET_MASK, val);
+	client->addr = orig_addr;
+
+	return ret;
+}
+
+static const struct regmap_config cht_wc_regmap_cfg = {
+	.reg_bits = 16,
+	.val_bits = 8,
+	.reg_write = cht_wc_byte_reg_write,
+	.reg_read = cht_wc_byte_reg_read,
+};
+
+static int cht_wc_probe(struct i2c_client *client,
+			const struct i2c_device_id *i2c_id)
+{
+	struct device *dev = &client->dev;
+	struct intel_soc_pmic *pmic;
+	acpi_handle handle;
+	acpi_status status;
+	unsigned long long hrv;
+	int ret;
+
+	handle = ACPI_HANDLE(dev);
+	status = acpi_evaluate_integer(handle, "_HRV", NULL, &hrv);
+	if (ACPI_FAILURE(status)) {
+		dev_err(dev, "Failed to get PMIC hardware revision\n");
+		return -ENODEV;
+	}
+	if (hrv != CHT_WC_HRV) {
+		dev_err(dev, "Invalid PMIC hardware revision: %llu\n", hrv);
+		return -ENODEV;
+	}
+	if (client->irq < 0) {
+		dev_err(dev, "Invalid IRQ\n");
+		return -ENODEV;
+	}
+
+	pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
+	if (!pmic)
+		return -ENOMEM;
+
+	pmic->irq = client->irq;
+	pmic->dev = dev;
+	i2c_set_clientdata(client, pmic);
+
+	pmic->regmap = devm_regmap_init(dev, NULL, client, &cht_wc_regmap_cfg);
+	if (IS_ERR(pmic->regmap)) {
+		ret = PTR_ERR(pmic->regmap);
+		dev_err(dev, "Failed to initialise regmap: %d\n", ret);
+		return ret;
+	}
+
+	ret = mfd_add_devices(dev, -1, cht_wc_dev, ARRAY_SIZE(cht_wc_dev),
+			      NULL, 0, NULL);
+	if (ret) {
+		dev_err(dev, "Failed to add devices: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int cht_wc_remove(struct i2c_client *client)
+{
+	struct intel_soc_pmic *pmic = i2c_get_clientdata(client);
+
+	mfd_remove_devices(pmic->dev);
+
+	return 0;
+}
+
+static const struct i2c_device_id cht_wc_i2c_id[] = {
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, cht_wc_i2c_id);
+
+static const struct acpi_device_id cht_wc_acpi_ids[] = {
+	{ "INT34D3", },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, cht_wc_acpi_ids);
+
+static struct i2c_driver cht_wc_driver = {
+	.driver	= {
+		.name	= "CHT Whiskey Cove PMIC",
+		.acpi_match_table = ACPI_PTR(cht_wc_acpi_ids),
+	},
+	.probe = cht_wc_probe,
+	.remove	= cht_wc_remove,
+	.id_table = cht_wc_i2c_id,
+};
+
+module_i2c_driver(cht_wc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
diff --git a/include/linux/mfd/intel_chtwc.h b/include/linux/mfd/intel_chtwc.h
new file mode 100644
index 0000000..1fb356f
--- /dev/null
+++ b/include/linux/mfd/intel_chtwc.h
@@ -0,0 +1,75 @@
+/*
+ * intel_chtwc.h - Header file for Intel Cherrytrail Whiskey Cove PMIC
+ *
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on various non upstream patches to support the CHT Whiskey Cove PMIC:
+ * Copyright (C) 2013-2015 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __INTEL_CHTWC_H__
+#define __INTEL_CHTWC_H__
+
+#define CHT_WC_DEVICE1_ADDR		0x6e
+
+#define CHT_WC_V1P05A_CTRL		0x6e3b
+#define CHT_WC_V1P15_CTRL		0x6e3c
+#define CHT_WC_V1P05A_VSEL		0x6e3d
+#define CHT_WC_V1P15_VSEL		0x6e3e
+#define CHT_WC_V1P8A_CTRL		0x6e56
+#define CHT_WC_V1P8SX_CTRL		0x6e57
+#define CHT_WC_VDDQ_CTRL		0x6e58
+#define CHT_WC_V1P2A_CTRL		0x6e59
+#define CHT_WC_V1P2SX_CTRL		0x6e5a
+#define CHT_WC_V1P8A_VSEL		0x6e5b
+#define CHT_WC_VDDQ_VSEL		0x6e5c
+#define CHT_WC_V2P8SX_CTRL		0x6e5d
+#define CHT_WC_V3P3A_CTRL		0x6e5e
+#define CHT_WC_V3P3SD_CTRL		0x6e5f
+#define CHT_WC_VSDIO_CTRL		0x6e67
+#define CHT_WC_V3P3A_VSEL		0x6e68
+#define CHT_WC_VPROG1A_CTRL		0x6e90
+#define CHT_WC_VPROG1B_CTRL		0x6e91
+#define CHT_WC_VPROG1F_CTRL		0x6e95
+#define CHT_WC_VPROG2D_CTRL		0x6e99
+#define CHT_WC_VPROG3A_CTRL		0x6e9a
+#define CHT_WC_VPROG3B_CTRL		0x6e9b
+#define CHT_WC_VPROG4A_CTRL		0x6e9c
+#define CHT_WC_VPROG4B_CTRL		0x6e9d
+#define CHT_WC_VPROG4C_CTRL		0x6e9e
+#define CHT_WC_VPROG4D_CTRL		0x6e9f
+#define CHT_WC_VPROG5A_CTRL		0x6ea0
+#define CHT_WC_VPROG5B_CTRL		0x6ea1
+#define CHT_WC_VPROG6A_CTRL		0x6ea2
+#define CHT_WC_VPROG6B_CTRL		0x6ea3
+#define CHT_WC_VPROG1A_VSEL		0x6ec0
+#define CHT_WC_VPROG1B_VSEL		0x6ec1
+#define CHT_WC_V1P8SX_VSEL		0x6ec2
+#define CHT_WC_V1P2SX_VSEL		0x6ec3
+#define CHT_WC_V1P2A_VSEL		0x6ec4
+#define CHT_WC_VPROG1F_VSEL		0x6ec5
+#define CHT_WC_VSDIO_VSEL		0x6ec6
+#define CHT_WC_V2P8SX_VSEL		0x6ec7
+#define CHT_WC_V3P3SD_VSEL		0x6ec8
+#define CHT_WC_VPROG2D_VSEL		0x6ec9
+#define CHT_WC_VPROG3A_VSEL		0x6eca
+#define CHT_WC_VPROG3B_VSEL		0x6ecb
+#define CHT_WC_VPROG4A_VSEL		0x6ecc
+#define CHT_WC_VPROG4B_VSEL		0x6ecd
+#define CHT_WC_VPROG4C_VSEL		0x6ece
+#define CHT_WC_VPROG4D_VSEL		0x6ecf
+#define CHT_WC_VPROG5A_VSEL		0x6ed0
+#define CHT_WC_VPROG5B_VSEL		0x6ed1
+#define CHT_WC_VPROG6A_VSEL		0x6ed2
+#define CHT_WC_VPROG6B_VSEL		0x6ed3
+
+#endif
-- 
2.9.3

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH v2] mfd: Add Cherrytrail WhiskeyCove PMIC driver
  2017-02-27 21:38 [PATCH v2] mfd: Add Cherrytrail WhiskeyCove PMIC driver Hans de Goede
@ 2017-02-27 22:06 ` Andy Shevchenko
  2017-02-28 13:23   ` Hans de Goede
  0 siblings, 1 reply; 3+ messages in thread
From: Andy Shevchenko @ 2017-02-27 22:06 UTC (permalink / raw)
  To: Hans de Goede
  Cc: Andy Shevchenko, Lee Jones, Takashi Iwai, linux-kernel, Bin Gao,
	Felipe Balbi, Andy Shevchenko

On Mon, Feb 27, 2017 at 11:38 PM, Hans de Goede <hdegoede@redhat.com> wrote:
> Add mfd driver for Intel CHT WhiskeyCove PMIC, based on various non
> upstreamed CHT WhiskeyCove PMIC patches. For now this just adds a minimal
> version which implements just enough to get ACPI PMIC opregion support to
> work, so that suspend/resume will work on machines with this PMIC.
>
> Cc: Bin Gao <bin.gao@intel.com>
> Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v2:

You were too fast. Please, give a time for reviewers to do their job.

So, please address comments per v2 first.

> -Since this uses plain mfd and not the intel_soc_pmic stuff give it
>  its own Kconfig and allow this to be built as a module

> -Add missing #include <acpi/acpi_bus.h>

Do we need it explicitly included?

-- 
With Best Regards,
Andy Shevchenko

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v2] mfd: Add Cherrytrail WhiskeyCove PMIC driver
  2017-02-27 22:06 ` Andy Shevchenko
@ 2017-02-28 13:23   ` Hans de Goede
  0 siblings, 0 replies; 3+ messages in thread
From: Hans de Goede @ 2017-02-28 13:23 UTC (permalink / raw)
  To: Andy Shevchenko
  Cc: Andy Shevchenko, Lee Jones, Takashi Iwai, linux-kernel, Bin Gao,
	Felipe Balbi, Andy Shevchenko

Hi,

On 27-02-17 23:06, Andy Shevchenko wrote:
> On Mon, Feb 27, 2017 at 11:38 PM, Hans de Goede <hdegoede@redhat.com> wrote:
>> Add mfd driver for Intel CHT WhiskeyCove PMIC, based on various non
>> upstreamed CHT WhiskeyCove PMIC patches. For now this just adds a minimal
>> version which implements just enough to get ACPI PMIC opregion support to
>> work, so that suspend/resume will work on machines with this PMIC.
>>
>> Cc: Bin Gao <bin.gao@intel.com>
>> Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
>> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> Changes in v2:
>
> You were too fast. Please, give a time for reviewers to do their job.
>
> So, please address comments per v2 first.
>
>> -Since this uses plain mfd and not the intel_soc_pmic stuff give it
>>  its own Kconfig and allow this to be built as a module
>
>> -Add missing #include <acpi/acpi_bus.h>
>
> Do we need it explicitly included?

I was trying to fix a kbuild bot error with this
(Takashi has it on a topic-branch), but it only made it
worse. so I'm dropping this again for v3, instead adding
"depends on ACPI" to the Kconfig for this, which will
hopefully really fix the kbuild bot errors.

Regards,

Hans

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2017-02-28 13:33 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-27 21:38 [PATCH v2] mfd: Add Cherrytrail WhiskeyCove PMIC driver Hans de Goede
2017-02-27 22:06 ` Andy Shevchenko
2017-02-28 13:23   ` Hans de Goede

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).