linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [GIT pull] x86 fix for 4.18
@ 2018-08-05 11:34 Thomas Gleixner
  0 siblings, 0 replies; only message in thread
From: Thomas Gleixner @ 2018-08-05 11:34 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: LKML, Ingo Molnar

Linus,

please pull the latest x86-urgent-for-linus git tree from:

   git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-urgent-for-linus

A single fix, which addresses boot failures on machines which do not report
EBDA correctly, which can place the trampoline into reserved memory regions.
Validating against E820 prevents that.

Thanks,

	tglx

------------------>
Kirill A. Shutemov (1):
      x86/boot/compressed/64: Validate trampoline placement against E820


 arch/x86/boot/compressed/pgtable_64.c | 73 ++++++++++++++++++++++++++---------
 1 file changed, 55 insertions(+), 18 deletions(-)

diff --git a/arch/x86/boot/compressed/pgtable_64.c b/arch/x86/boot/compressed/pgtable_64.c
index 8c5107545251..9e2157371491 100644
--- a/arch/x86/boot/compressed/pgtable_64.c
+++ b/arch/x86/boot/compressed/pgtable_64.c
@@ -1,3 +1,4 @@
+#include <asm/e820/types.h>
 #include <asm/processor.h>
 #include "pgtable.h"
 #include "../string.h"
@@ -34,10 +35,62 @@ unsigned long *trampoline_32bit __section(.data);
 extern struct boot_params *boot_params;
 int cmdline_find_option_bool(const char *option);
 
+static unsigned long find_trampoline_placement(void)
+{
+	unsigned long bios_start, ebda_start;
+	unsigned long trampoline_start;
+	struct boot_e820_entry *entry;
+	int i;
+
+	/*
+	 * Find a suitable spot for the trampoline.
+	 * This code is based on reserve_bios_regions().
+	 */
+
+	ebda_start = *(unsigned short *)0x40e << 4;
+	bios_start = *(unsigned short *)0x413 << 10;
+
+	if (bios_start < BIOS_START_MIN || bios_start > BIOS_START_MAX)
+		bios_start = BIOS_START_MAX;
+
+	if (ebda_start > BIOS_START_MIN && ebda_start < bios_start)
+		bios_start = ebda_start;
+
+	bios_start = round_down(bios_start, PAGE_SIZE);
+
+	/* Find the first usable memory region under bios_start. */
+	for (i = boot_params->e820_entries - 1; i >= 0; i--) {
+		entry = &boot_params->e820_table[i];
+
+		/* Skip all entries above bios_start. */
+		if (bios_start <= entry->addr)
+			continue;
+
+		/* Skip non-RAM entries. */
+		if (entry->type != E820_TYPE_RAM)
+			continue;
+
+		/* Adjust bios_start to the end of the entry if needed. */
+		if (bios_start > entry->addr + entry->size)
+			bios_start = entry->addr + entry->size;
+
+		/* Keep bios_start page-aligned. */
+		bios_start = round_down(bios_start, PAGE_SIZE);
+
+		/* Skip the entry if it's too small. */
+		if (bios_start - TRAMPOLINE_32BIT_SIZE < entry->addr)
+			continue;
+
+		break;
+	}
+
+	/* Place the trampoline just below the end of low memory */
+	return bios_start - TRAMPOLINE_32BIT_SIZE;
+}
+
 struct paging_config paging_prepare(void *rmode)
 {
 	struct paging_config paging_config = {};
-	unsigned long bios_start, ebda_start;
 
 	/* Initialize boot_params. Required for cmdline_find_option_bool(). */
 	boot_params = rmode;
@@ -61,23 +114,7 @@ struct paging_config paging_prepare(void *rmode)
 		paging_config.l5_required = 1;
 	}
 
-	/*
-	 * Find a suitable spot for the trampoline.
-	 * This code is based on reserve_bios_regions().
-	 */
-
-	ebda_start = *(unsigned short *)0x40e << 4;
-	bios_start = *(unsigned short *)0x413 << 10;
-
-	if (bios_start < BIOS_START_MIN || bios_start > BIOS_START_MAX)
-		bios_start = BIOS_START_MAX;
-
-	if (ebda_start > BIOS_START_MIN && ebda_start < bios_start)
-		bios_start = ebda_start;
-
-	/* Place the trampoline just below the end of low memory, aligned to 4k */
-	paging_config.trampoline_start = bios_start - TRAMPOLINE_32BIT_SIZE;
-	paging_config.trampoline_start = round_down(paging_config.trampoline_start, PAGE_SIZE);
+	paging_config.trampoline_start = find_trampoline_placement();
 
 	trampoline_32bit = (unsigned long *)paging_config.trampoline_start;
 

^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2018-08-05 11:34 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-08-05 11:34 [GIT pull] x86 fix for 4.18 Thomas Gleixner

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).