Re: [PATCH 1/1] PCI: Cleanup link activation wait logic

["Maciej W. Rozycki" <macro@orcam.me.uk>]

On Fri, 16 Feb 2024, Ilpo Järvinen wrote:

> > > Yet another thing in this quirk code I don't like is how it can leaves the 
> > > target speed to 2.5GT/s when the quirk fails to get the link working 
> > > (which actually does happen in the disconnection cases because DLLLA won't 
> > > be set so the target speed will not be restored).
> > 
> >  I chose to leave the target speed at the most recent setting, because the 
> > link doesn't work in that case anyway, so I concluded it doesn't matter, 
> > but reduces messing with the device; technically you should retrain again 
> > afterwards.  I'm not opposed to changing this if you have a use case.
> 
> It remains suboptimally set in a case where something is plugged again 
> into that port, for Thunderbolt it doesn't matter as the PCIe speed picked 
> is quite bogus anyway, but disconnect then plug something again is not 
> limited to Thunderbolt.

 Sure, my understanding has been all PCIe option devices are supposed to 
be hot-pluggable, at least these in the regular form factor (which is why 
PCIe edge connector contacts have varying lengths, unlike conventional 
PCI).

  Maciej