Re: [PATCH 1/1] scsi: aacraid: resurrect correct arc ctrl checks for Series-6

[Finn Thain <fthain@telegraphics.com.au>]

Andrey,

It is helpful to send your review to the patch author. I've added 
Konstantin to the Cc list, as well as Raghava (who introduced the 
regression addressed by Konstantin's patch).

If I'm not mistaken, your review misunderstands the patch description.

FWIW, Konstantin's patch might have been easier to follow if it was a 
simple 'git revert'.

-- 

On Sun, 7 Jul 2019, Andrey Jr. Melnikov wrote:

> In gmane.linux.scsi Konstantin Khorenko <khorenko@virtuozzo.com> wrote:
> > This partially reverts ms commit
> > 395e5df79a95 ("scsi: aacraid: Remove reference to Series-9")
> 
> > The patch above not only drops Series-9 cards checks but also
> > changes logic for Series-6 controllers which leads to controller
> > hangs/resets under high io load.
> 
> > So revert to original arc ctrl checks for Series-6 controllers.
> 
> > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1777586
> > https://bugzilla.redhat.com/show_bug.cgi?id=1724077
> > https://jira.sw.ru/browse/PSBM-95736
> 
> > Fixes: 395e5df79a95 ("scsi: aacraid: Remove reference to Series-9")
> > Cc: stable@vger.kernel.org
> 
> > Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
> > ---
> >  drivers/scsi/aacraid/aacraid.h  | 11 -----------
> >  drivers/scsi/aacraid/comminit.c | 14 ++++++++++----
> >  drivers/scsi/aacraid/commsup.c  |  4 +++-
> >  drivers/scsi/aacraid/linit.c    |  7 +++++--
> >  4 files changed, 18 insertions(+), 18 deletions(-)
> 
> > diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
> > index 3fa03230f6ba..b674fb645523 100644
> > --- a/drivers/scsi/aacraid/aacraid.h
> > +++ b/drivers/scsi/aacraid/aacraid.h
> > @@ -2729,17 +2729,6 @@ int _aac_rx_init(struct aac_dev *dev);
> >  int aac_rx_select_comm(struct aac_dev *dev, int comm);
> >  int aac_rx_deliver_producer(struct fib * fib);
> >  
> > -static inline int aac_is_src(struct aac_dev *dev)
> > -{
> > -       u16 device = dev->pdev->device;
> > -
> > -       if (device == PMC_DEVICE_S6 ||
> > -               device == PMC_DEVICE_S7 ||
> > -               device == PMC_DEVICE_S8)
> > -               return 1;
> > -       return 0;
> > -}
> > -
> 
> Why remove helper?
> 
> >  static inline int aac_supports_2T(struct aac_dev *dev)
> >  {
> >         return (dev->adapter_info.options & AAC_OPT_NEW_COMM_64);
> > diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
> > index d4fcfa1e54e0..b8046b6c1239 100644
> > --- a/drivers/scsi/aacraid/comminit.c
> > +++ b/drivers/scsi/aacraid/comminit.c
> > @@ -41,7 +41,9 @@ static inline int aac_is_msix_mode(struct aac_dev *dev)
> >  {
> >         u32 status = 0;
> >  
> > -       if (aac_is_src(dev))
> > +       if (dev->pdev->device == PMC_DEVICE_S6 ||
> > +           dev->pdev->device == PMC_DEVICE_S7 ||
> > +           dev->pdev->device == PMC_DEVICE_S8)
> >                 status = src_readl(dev, MUnit.OMR);
> >         return (status & AAC_INT_MODE_MSIX);
> >  }
> > @@ -349,7 +351,8 @@ int aac_send_shutdown(struct aac_dev * dev)
> >         /* FIB should be freed only after getting the response from the F/W */
> >         if (status != -ERESTARTSYS)
> >                 aac_fib_free(fibctx);
> Fix this
> > -       if (aac_is_src(dev) &&
> > +       if ((dev->pdev->device == PMC_DEVICE_S7 ||
> > +            dev->pdev->device == PMC_DEVICE_S8) &&
> >              dev->msi_enabled)
> >                 aac_set_intx_mode(dev);
> >         return status;
> > @@ -605,7 +608,8 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
> >                 dev->max_fib_size = status[1] & 0xFFE0;
> >                 host->sg_tablesize = status[2] >> 16;
> >                 dev->sg_tablesize = status[2] & 0xFFFF;
> this one
> > -               if (aac_is_src(dev)) {
> > +               if (dev->pdev->device == PMC_DEVICE_S7 ||
> > +                   dev->pdev->device == PMC_DEVICE_S8) {
> >                         if (host->can_queue > (status[3] >> 16) -
> >                                         AAC_NUM_MGT_FIB)
> >                                 host->can_queue = (status[3] >> 16) -
> > @@ -624,7 +628,9 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
> >                         pr_warn("numacb=%d ignored\n", numacb);
> >         }
> >  
> > -       if (aac_is_src(dev))
> > +       if (dev->pdev->device == PMC_DEVICE_S6 ||
> > +           dev->pdev->device == PMC_DEVICE_S7 ||
> > +           dev->pdev->device == PMC_DEVICE_S8)
> >                 aac_define_int_mode(dev);
> >         /*
> >          *      Ok now init the communication subsystem
> > diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
> > index 2142a649e865..705e003caa95 100644
> > --- a/drivers/scsi/aacraid/commsup.c
> > +++ b/drivers/scsi/aacraid/commsup.c
> > @@ -2574,7 +2574,9 @@ void aac_free_irq(struct aac_dev *dev)
> >  {
> >         int i;
> >  
> > -       if (aac_is_src(dev)) {
> > +       if (dev->pdev->device == PMC_DEVICE_S6 ||
> > +           dev->pdev->device == PMC_DEVICE_S7 ||
> > +           dev->pdev->device == PMC_DEVICE_S8) {
> >                 if (dev->max_msix > 1) {
> >                         for (i = 0; i < dev->max_msix; i++)
> >                                 free_irq(pci_irq_vector(dev->pdev, i),
> > diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
> > index 644f7f5c61a2..3b7968b17169 100644
> > --- a/drivers/scsi/aacraid/linit.c
> > +++ b/drivers/scsi/aacraid/linit.c
> > @@ -1560,7 +1560,9 @@ static void __aac_shutdown(struct aac_dev * aac)
> >  
> >         aac_adapter_disable_int(aac);
> >  
> > -       if (aac_is_src(aac)) {
> > +       if (aac->pdev->device == PMC_DEVICE_S6 ||
> > +           aac->pdev->device == PMC_DEVICE_S7 ||
> > +           aac->pdev->device == PMC_DEVICE_S8) {
> >                 if (aac->max_msix > 1) {
> >                         for (i = 0; i < aac->max_msix; i++) {
> >                                 free_irq(pci_irq_vector(aac->pdev, i),
> > @@ -1835,7 +1837,8 @@ static int aac_acquire_resources(struct aac_dev *dev)
> >         aac_adapter_enable_int(dev);
> >  
> >  
> and this.
> > -       if (aac_is_src(dev))
> > +       if (dev->pdev->device == PMC_DEVICE_S7 ||
> > +           dev->pdev->device == PMC_DEVICE_S8)
> >                 aac_define_int_mode(dev);
> >  
> >         if (dev->msi_enabled)
> 
> 
>