* i915 pipe A assertion failure (expected on, current off)
@ 2013-08-26 13:14 Meelis Roos
2013-09-21 15:29 ` Meelis Roos
0 siblings, 1 reply; 13+ messages in thread
From: Meelis Roos @ 2013-08-26 13:14 UTC (permalink / raw)
To: Linux Kernel list, dri-devel
Tried 3.11-rc7 on Thinkpad X30 (first 3-11-rc tried on this hw). Works
but i915 gives strange assertion failure with WARNING stack trace. This
is new since 3.10.
The only monitor is internal LCD. lspci -vvvnn is also below.
[ 0.000000] Linux version 3.11.0-rc7 (mroos@x30) (gcc version 4.8.1 (Debian 4.8.1-5) ) #4 Mon Aug 26 11:42:19 EEST 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f76ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f770000-0x000000001f77dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001f77e000-0x000000001f77ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000001f780000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: IBM 26724XG/26724XG, BIOS 1KET48WW (1.09 ) 06/16/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1f770 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01FF80000 mask FFFF80000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 512MB, type WB
[ 0.000000] reg 1, base: 523776KB, range: 512KB, type UC
[ 0.000000] total RAM covered: 511M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 2 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 512MB, type WB
[ 0.000000] reg 1, base: 523776KB, range: 512KB, type UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x017fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1f3fffff]
[ 0.000000] [mem 0x1f000000-0x1f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x18000000-0x1effffff]
[ 0.000000] [mem 0x18000000-0x1effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x17ffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x17ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1f76ffff]
[ 0.000000] [mem 0x1f400000-0x1f76ffff] page 4k
[ 0.000000] BRK [0x014da000, 0x014dafff] PGTABLE
[ 0.000000] ACPI: RSDP 000f7090 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 1f772a76 0004C (v01 IBM TP-1K 00001090 LTP 00000000)
[ 0.000000] ACPI: FACP 1f772b00 00081 (v01 IBM TP-1K 00001090 IBM 00000001)
[ 0.000000] ACPI: DSDT 1f772be7 0B22C (v01 IBM TP-1K 00001090 MSFT 0100000D)
[ 0.000000] ACPI: FACS 1f77f000 00040
[ 0.000000] ACPI: SSDT 1f772bb4 00033 (v01 IBM TP-1K 00001090 MSFT 0100000D)
[ 0.000000] ACPI: ECDT 1f77de13 00052 (v01 IBM TP-1K 00001090 IBM 00000001)
[ 0.000000] ACPI: TCPA 1f77de65 00032 (v01 IBM TP-1K 00001090 PTL 00000001)
[ 0.000000] ACPI: BOOT 1f77dfd8 00028 (v01 IBM TP-1K 00001090 LTP 00000001)
[ 0.000000] 503MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1f770000
[ 0.000000] low ram: 0 - 1f770000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x1f76ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1f76ffff]
[ 0.000000] On node 0 totalpages: 128782
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 975 pages used for memmap
[ 0.000000] Normal zone: 124784 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Local APIC disabled by BIOS -- reenabling.
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xff7fffff] available for PCI devices
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127775
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-rc7 root=/dev/sda1 ro lapic
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 505532K/515128K available (3143K kernel code, 231K rwdata, 920K rodata, 316K init, 320K bss, 9596K reserved)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[ 0.000000] vmalloc : 0xdff70000 - 0xfffa0000 ( 512 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf770000 ( 503 MB)
[ 0.000000] .init : 0xc1434000 - 0xc1483000 ( 316 kB)
[ 0.000000] .data : 0xc1312179 - 0xc1433c00 (1158 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1312179 (3144 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=dec06000 soft=dec08000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1196.090 MHz processor
[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2392.18 BogoMIPS (lpj=4784360)
[ 0.008146] pid_max: default: 32768 minimum: 301
[ 0.008320] Mount-cache hash table entries: 512
[ 0.012344] mce: CPU supports 5 MCE banks
[ 0.012465] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.012465] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
[ 0.012465] tlb_flushall_shift: 6
[ 0.012635] CPU: Mobile Intel(R) Pentium(R) III CPU - M 1200MHz (fam: 06, model: 0b, stepping: 04)
[ 0.012852] ACPI: Core revision 20130517
[ 0.022371] ACPI: All ACPI Tables successfully acquired
[ 0.022765] ACPI: setting ELCR to 0200 (from 0820)
[ 0.024201] Performance Events: p6 PMU driver.
[ 0.028011] ... version: 0
[ 0.028331] ... bit width: 32
[ 0.028650] ... generic registers: 2
[ 0.028960] ... value mask: 00000000ffffffff
[ 0.029291] ... max period: 000000007fffffff
[ 0.029612] ... fixed-purpose events: 0
[ 0.029931] ... event mask: 0000000000000003
[ 0.030548] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.032000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.032000] devtmpfs: initialized
[ 0.032000] PM: Registering ACPI NVS region [mem 0x1f77e000-0x1f77ffff] (8192 bytes)
[ 0.032000] NET: Registered protocol family 16
[ 0.032000] ACPI: bus type PCI registered
[ 0.032000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.032000] PCI: PCI BIOS revision 2.10 entry at 0xfd90e, last bus=7
[ 0.032000] PCI: Using configuration type 1 for base access
[ 0.032000] bio: create slab <bio-0> at 0
[ 0.032000] ACPI: Added _OSI(Module Device)
[ 0.032000] ACPI: Added _OSI(Processor Device)
[ 0.032000] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.032000] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.033425] ACPI: EC: EC description table is found, configuring boot EC
[ 0.044785] ACPI: Interpreter enabled
[ 0.044785] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.044858] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.045037] ACPI: (supports S0 S3 S4 S5)
[ 0.045106] ACPI: Using PIC for interrupt routing
[ 0.045210] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.049355] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.056823] ACPI: Power Resource [PUBS] (on)
[ 0.064378] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.064879] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
[ 0.065373] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.065866] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.066630] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.067335] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.068187] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.069217] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.070150] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.070569] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.070576] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.070582] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.070589] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.070596] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.070602] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.070609] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[ 0.070615] PCI: root bus 00: using default resources
[ 0.070624] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.071398] PCI host bridge to bus 0000:00
[ 0.071723] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.072006] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.072349] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.072715] pci 0000:00:00.0: [8086:3575] type 00 class 0x060000
[ 0.072870] pci 0000:00:02.0: [8086:3577] type 00 class 0x030000
[ 0.072886] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.072897] pci 0000:00:02.0: reg 0x14: [mem 0xd0000000-0xd007ffff]
[ 0.072932] pci 0000:00:02.0: supports D1
[ 0.073044] pci 0000:00:02.1: [8086:3577] type 00 class 0x038000
[ 0.073058] pci 0000:00:02.1: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[ 0.073067] pci 0000:00:02.1: reg 0x14: [mem 0xd0080000-0xd00fffff]
[ 0.073100] pci 0000:00:02.1: supports D1
[ 0.073229] pci 0000:00:1d.0: [8086:2482] type 00 class 0x0c0300
[ 0.073270] pci 0000:00:1d.0: reg 0x20: [io 0x1800-0x181f]
[ 0.073453] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.073453] pci 0000:00:1d.1: [8086:2484] type 00 class 0x0c0300
[ 0.073453] pci 0000:00:1d.1: reg 0x20: [io 0x1820-0x183f]
[ 0.073453] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.073453] pci 0000:00:1d.2: [8086:2487] type 00 class 0x0c0300
[ 0.073453] pci 0000:00:1d.2: reg 0x20: [io 0x1840-0x185f]
[ 0.073453] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.073453] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400
[ 0.073453] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.073453] pci 0000:00:1f.0: [8086:248c] type 00 class 0x060100
[ 0.073453] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[ 0.073453] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO
[ 0.073453] pci 0000:00:1f.1: [8086:248a] type 00 class 0x01018a
[ 0.073453] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.073453] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.073453] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
[ 0.073453] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.073453] pci 0000:00:1f.1: reg 0x20: [io 0x1860-0x186f]
[ 0.073453] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
[ 0.073564] pci 0000:00:1f.3: [8086:2483] type 00 class 0x0c0500
[ 0.073605] pci 0000:00:1f.3: reg 0x20: [io 0x1880-0x189f]
[ 0.073722] pci 0000:00:1f.5: [8086:2485] type 00 class 0x040100
[ 0.073739] pci 0000:00:1f.5: reg 0x10: [io 0x1c00-0x1cff]
[ 0.073752] pci 0000:00:1f.5: reg 0x14: [io 0x18c0-0x18ff]
[ 0.076052] pci 0000:00:1f.6: [8086:2486] type 00 class 0x070300
[ 0.076069] pci 0000:00:1f.6: reg 0x10: [io 0x2400-0x24ff]
[ 0.076082] pci 0000:00:1f.6: reg 0x14: [io 0x2000-0x207f]
[ 0.076183] pci 0000:00:1f.6: System wakeup disabled by ACPI
[ 0.076438] acpiphp: Slot [1] registered
[ 0.076528] pci 0000:01:00.0: [1180:0476] type 02 class 0x060700
[ 0.076546] pci 0000:01:00.0: reg 0x10: [mem 0x50000000-0x50000fff]
[ 0.076572] pci 0000:01:00.0: supports D1 D2
[ 0.076578] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.076695] pci 0000:01:00.1: [1180:0476] type 02 class 0x060700
[ 0.076714] pci 0000:01:00.1: reg 0x10: [mem 0x50100000-0x50100fff]
[ 0.076740] pci 0000:01:00.1: supports D1 D2
[ 0.076746] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.076842] pci 0000:01:00.2: [1180:0552] type 00 class 0x0c0010
[ 0.076860] pci 0000:01:00.2: reg 0x10: [mem 0xd0205000-0xd02057ff]
[ 0.076919] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
[ 0.077024] pci 0000:01:02.0: [14b9:a504] type 00 class 0x028000
[ 0.077043] pci 0000:01:02.0: reg 0x10: [io 0x7000-0x70ff]
[ 0.077055] pci 0000:01:02.0: reg 0x14: [mem 0xd0200000-0xd0203fff]
[ 0.077067] pci 0000:01:02.0: reg 0x18: [mem 0xd0400000-0xd07fffff]
[ 0.077095] pci 0000:01:02.0: reg 0x30: [mem 0x00000000-0x001fffff pref]
[ 0.077125] pci 0000:01:02.0: supports D1 D2
[ 0.077210] pci 0000:01:08.0: [8086:1031] type 00 class 0x020000
[ 0.077228] pci 0000:01:08.0: reg 0x10: [mem 0xd0204000-0xd0204fff]
[ 0.077240] pci 0000:01:08.0: reg 0x14: [io 0x7400-0x743f]
[ 0.077292] pci 0000:01:08.0: supports D1 D2
[ 0.077297] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.077404] pci 0000:00:1e.0: PCI bridge to [bus 01-07] (subtractive decode)
[ 0.077483] pci 0000:00:1e.0: bridge window [io 0x3000-0x7fff]
[ 0.077491] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xdfffffff]
[ 0.077500] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
[ 0.077506] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.077512] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.077578] pci_bus 0000:02: busn_res: can not insert [bus 02-ff] under [bus 01-07] (conflicts with (null) [bus 01-07])
[ 0.077588] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
[ 0.077655] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 01-07] (conflicts with (null) [bus 01-07])
[ 0.077664] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
[ 0.077678] pci_bus 0000:00: on NUMA node 0
[ 0.077686] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.077813] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.078355] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.078355] Found 1 acpi root devices
[ 0.078355] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.080164] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.080285] vgaarb: loaded
[ 0.080351] vgaarb: bridge control possible 0000:00:02.0
[ 0.080596] SCSI subsystem initialized
[ 0.080667] ACPI: bus type ATA registered
[ 0.080844] libata version 3.00 loaded.
[ 0.080912] PCI: Using ACPI for IRQ routing
[ 0.081084] PCI: pci_cache_line_size set to 32 bytes
[ 0.081133] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.081139] e820: reserve RAM buffer [mem 0x1f770000-0x1fffffff]
[ 0.081400] Switched to clocksource refined-jiffies
[ 0.081533] pnp: PnP ACPI init
[ 0.081620] ACPI: bus type PNP registered
[ 0.082745] pnp 00:00: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.083411] pnp 00:00: disabling [mem 0x000c0000-0x000c3fff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.084013] pnp 00:00: disabling [mem 0x000c4000-0x000c7fff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.084678] pnp 00:00: disabling [mem 0x000c8000-0x000cbfff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.085338] pnp 00:00: disabling [mem 0x000cc000-0x000cffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.086001] pnp 00:00: disabling [mem 0x000d0000-0x000cffff disabled] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.086672] pnp 00:00: disabling [mem 0x000d4000-0x000d3fff disabled] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.087324] pnp 00:00: disabling [mem 0x000d8000-0x000d7fff disabled] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.088010] pnp 00:00: disabling [mem 0x000dc000-0x000dffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.088666] pnp 00:00: disabling [mem 0x000e0000-0x000e3fff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.089328] pnp 00:00: disabling [mem 0x000e4000-0x000e7fff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.089989] pnp 00:00: disabling [mem 0x000e8000-0x000ebfff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.090504] pnp 00:00: disabling [mem 0x000ec000-0x000effff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.091564] pnp 00:00: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.091691] pnp 00:00: disabling [mem 0x00100000-0x1fffffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.091885] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.092009] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.092160] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.092237] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.092311] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.092385] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.092460] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.092494] pnp 00:02: [dma 4]
[ 0.092544] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.092606] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.092672] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.092738] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.092801] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.092865] pnp 00:07: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.092941] pnp 00:08: [dma 2]
[ 0.093016] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.093312] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.093605] pnp 00:0a: [dma 0]
[ 0.093754] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.093941] pnp 00:0b: [dma 3]
[ 0.094102] pnp 00:0b: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active)
[ 0.094162] pnp: PnP ACPI: found 12 devices
[ 0.094162] ACPI: bus type PNP unregistered
[ 0.133330] Switched to clocksource acpi_pm
[ 0.133702] pci 0000:00:1f.0: BAR 7: [io 0x1000-0x107f] has bogus alignment
[ 0.134072] pci 0000:00:1f.1: BAR 5: assigned [mem 0x20000000-0x200003ff]
[ 0.134425] pci 0000:01:00.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.134432] pci 0000:01:00.0: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.134440] pci 0000:01:00.1: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.134447] pci 0000:01:00.1: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.134453] pci 0000:01:00.0: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.134459] pci 0000:01:00.0: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.134466] pci 0000:01:00.1: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.134472] pci 0000:01:00.1: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.134479] pci 0000:01:00.0: BAR 9: assigned [mem 0xf0000000-0xf3ffffff pref]
[ 0.135081] pci 0000:01:00.0: BAR 10: assigned [mem 0xd4000000-0xd7ffffff]
[ 0.135422] pci 0000:01:00.1: BAR 9: assigned [mem 0xf4000000-0xf7ffffff pref]
[ 0.135422] pci 0000:01:00.1: BAR 10: assigned [mem 0xd8000000-0xdbffffff]
[ 0.135422] pci 0000:01:02.0: BAR 6: assigned [mem 0xd0800000-0xd09fffff pref]
[ 0.135685] pci 0000:01:00.0: BAR 7: assigned [io 0x3000-0x30ff]
[ 0.136036] pci 0000:01:00.0: BAR 8: assigned [io 0x3400-0x34ff]
[ 0.136376] pci 0000:01:00.1: BAR 7: assigned [io 0x3800-0x38ff]
[ 0.136726] pci 0000:01:00.1: BAR 8: assigned [io 0x3c00-0x3cff]
[ 0.137081] pci 0000:01:00.0: CardBus bridge to [bus 02-05]
[ 0.137411] pci 0000:01:00.0: bridge window [io 0x3000-0x30ff]
[ 0.137761] pci 0000:01:00.0: bridge window [io 0x3400-0x34ff]
[ 0.138113] pci 0000:01:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
[ 0.138724] pci 0000:01:00.0: bridge window [mem 0xd4000000-0xd7ffffff]
[ 0.139065] pci 0000:01:00.1: CardBus bridge to [bus 06]
[ 0.139266] pci 0000:01:00.1: bridge window [io 0x3800-0x38ff]
[ 0.139341] pci 0000:01:00.1: bridge window [io 0x3c00-0x3cff]
[ 0.139416] pci 0000:01:00.1: bridge window [mem 0xf4000000-0xf7ffffff pref]
[ 0.139535] pci 0000:01:00.1: bridge window [mem 0xd8000000-0xdbffffff]
[ 0.139612] pci 0000:00:1e.0: PCI bridge to [bus 01-07]
[ 0.139686] pci 0000:00:1e.0: bridge window [io 0x3000-0x7fff]
[ 0.139763] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xdfffffff]
[ 0.139840] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
[ 0.139974] pci 0000:00:1e.0: setting latency timer to 64
[ 0.140414] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.140489] PCI: setting IRQ 11 as level-triggered
[ 0.140824] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 0.140896] PCI: setting IRQ 5 as level-triggered
[ 0.140909] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.140915] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.140921] pci_bus 0000:01: resource 0 [io 0x3000-0x7fff]
[ 0.140927] pci_bus 0000:01: resource 1 [mem 0xd0200000-0xdfffffff]
[ 0.140933] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
[ 0.140939] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.140945] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
[ 0.140951] pci_bus 0000:02: resource 0 [io 0x3000-0x30ff]
[ 0.140956] pci_bus 0000:02: resource 1 [io 0x3400-0x34ff]
[ 0.140963] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[ 0.140968] pci_bus 0000:02: resource 3 [mem 0xd4000000-0xd7ffffff]
[ 0.140975] pci_bus 0000:06: resource 0 [io 0x3800-0x38ff]
[ 0.140980] pci_bus 0000:06: resource 1 [io 0x3c00-0x3cff]
[ 0.140986] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf7ffffff pref]
[ 0.140992] pci_bus 0000:06: resource 3 [mem 0xd8000000-0xdbffffff]
[ 0.141084] NET: Registered protocol family 2
[ 0.141532] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.141677] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141786] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.141911] TCP: reno registered
[ 0.141984] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142065] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142263] NET: Registered protocol family 1
[ 0.142368] pci 0000:00:02.0: Boot video device
[ 0.142393] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.142578] pci 0000:00:1d.1: power state changed by ACPI to D0
[ 0.143017] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.143455] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.143623] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.143744] PCI: CLS 32 bytes, default 32
[ 0.143834] Simple Boot Flag at 0x35 set to 0x1
[ 0.144411] audit: initializing netlink socket (disabled)
[ 0.144505] type=2000 audit(1377507957.144:1): initialized
[ 0.145028] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.148706] msgmni has been set to 987
[ 0.149299] cryptomgr_test (19) used greatest stack depth: 7688 bytes left
[ 0.149826] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.150435] io scheduler noop registered
[ 0.150872] io scheduler cfq registered (default)
[ 0.151271] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.151904] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.152568] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 0.153167] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 0.154261] Non-volatile memory driver v1.3
[ 0.154587] Linux agpgart interface v0.103
[ 0.154926] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 0.155294] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[ 0.156713] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.157122] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 0.157333] ata_piix 0000:00:1f.1: version 2.13
[ 0.157352] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.157554] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.158116] scsi0 : ata_piix
[ 0.158664] scsi1 : ata_piix
[ 0.159037] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[ 0.159113] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[ 0.159322] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.165066] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.165388] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.166074] mousedev: PS/2 mouse device common for all mice
[ 0.166471] rtc_cmos 00:05: RTC can wake from S4
[ 0.166964] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.167335] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram
[ 0.167704] cpuidle: using governor ladder
[ 0.168038] cpuidle: using governor menu
[ 0.168573] TCP: cubic registered
[ 0.169159] NET: Registered protocol family 10
[ 0.169933] NET: Registered protocol family 17
[ 0.170499] Using IPI Shortcut mode
[ 0.170912] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.171793] PM: Hibernation image not present or could not be loaded.
[ 0.171820] registered taskstats version 1
[ 0.172636] rtc_cmos 00:05: setting system clock to 2013-08-26 09:05:57 UTC (1377507957)
[ 0.328465] ata1.00: ATA-7: ST96023A, 3.06, max UDMA/100
[ 0.328541] ata1.00: 117210240 sectors, multi 16: LBA48
[ 0.344316] ata1.00: configured for UDMA/100
[ 0.344613] scsi 0:0:0:0: Direct-Access ATA ST96023A 3.06 PQ: 0 ANSI: 5
[ 0.345109] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 0.345327] sd 0:0:0:0: [sda] Write Protect is off
[ 0.345401] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.345449] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.396314] sda: sda1 sda2 < sda5 >
[ 0.396869] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.420066] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 0.420895] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[ 0.450246] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 0.450884] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 0.485577] devtmpfs: mounted
[ 0.486321] Freeing unused kernel memory: 316K (c1434000 - c1483000)
[ 0.486836] Write protecting the kernel text: 3148k
[ 0.487194] Write protecting the kernel read-only data: 924k
[ 1.144035] tsc: Refined TSC clocksource calibration: 1196.015 MHz
[ 1.197248] stty (36) used greatest stack depth: 6404 bytes left
[ 2.144103] Switched to clocksource tsc
[ 2.223101] udevd[147]: starting version 175
[ 3.237720] microcode: CPU0 sig=0x6b4, pf=0x20, revision=0x2
[ 3.309703] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.310119] modprobe (234) used greatest stack depth: 6200 bytes left
[ 3.354912] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 3.414089] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 3.417158] ACPI: Lid Switch [LID]
[ 3.418553] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 3.419385] ACPI: Sleep Button [SLPB]
[ 3.419940] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.420738] ACPI: Power Button [PWRF]
[ 3.426984] ACPI: AC Adapter [AC] (on-line)
[ 3.428358] modprobe (293) used greatest stack depth: 6044 bytes left
[ 3.499926] parport_pc 00:0a: reported by Plug and Play ACPI
[ 3.500379] parport0: PC-style at 0x3bc (0x7bc), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 3.554332] Floppy drive(s): fd0 is 1.44M
[ 3.571043] FDC 0 is a National Semiconductor PC87306
[ 3.607731] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.632098] intel_rng: FWH not detected
[ 3.750150] ACPI: Battery Slot [BAT0] (battery absent)
[ 3.775031] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.775119] ACPI: Thermal Zone [THM0] (59 C)
[ 3.786169] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 3.786657] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input5
[ 3.952149] firewire_ohci 0000:01:00.2: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 3.973039] ACPI: Requesting acpi_cpufreq
[ 3.973360] tsc: Marking TSC unstable due to TSC halts in idle
[ 3.973453] ACPI: acpi_idle registered with cpuidle
[ 3.976825] Switched to clocksource acpi_pm
[ 4.214250] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 4.214607] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.216293] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 4.240240] e100 0000:01:08.0 eth0: addr 0xd0204000, irq 11, MAC addr 00:09:6b:a0:c7:55
[ 4.255242] airo(): Probing for PCI adapters
[ 4.256498] airo(): Found an MPI350 card
[ 4.452263] firewire_core 0000:01:00.2: created device fw0: GUID 00061b0201022780, S400
[ 4.479584] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 4.596288] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 4.596375] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.596444] thinkpad_acpi: ThinkPad BIOS 1KET48WW (1.09 ), EC 1KHT18WW-1.06
[ 4.599842] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 4.615588] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.621789] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 4.793788] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 4.810093] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[ 5.203639] airo(eth1): Firmware version 5.2.19
[ 5.204037] airo(eth1): WPA unsupported with firmware versions older than 5.30.17.
[ 5.204665] airo(eth1): MAC enabled 00:02:8a:25:27:a8
[ 5.204921] yenta_cardbus 0000:01:00.0: CardBus bridge found [1014:0185]
[ 5.205099] airo(): Finished probing for PCI adapters
[ 5.206201] modprobe (309) used greatest stack depth: 5752 bytes left
[ 5.228109] ACPI: bus type USB registered
[ 5.229256] usbcore: registered new interface driver usbfs
[ 5.229718] usbcore: registered new interface driver hub
[ 5.229923] usbcore: registered new device driver usb
[ 5.332495] yenta_cardbus 0000:01:00.0: ISA IRQ mask 0x0418, PCI irq 11
[ 5.332873] yenta_cardbus 0000:01:00.0: Socket status: 30000006
[ 5.333235] yenta_cardbus 0000:01:00.0: pcmcia: parent PCI bridge window: [io 0x3000-0x7fff]
[ 5.333877] yenta_cardbus 0000:01:00.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xdfffffff]
[ 5.334539] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xdfffffff:
[ 5.335181] excluding 0xd0200000-0xd09fffff 0xd3a00000-0xdc1fffff 0xdfa00000-0xe01fffff
[ 5.335984] yenta_cardbus 0000:01:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf7ffffff pref]
[ 5.342470] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf7ffffff:
[ 5.342634] excluding 0xf0000000-0xf7ffffff
[ 5.346456] yenta_cardbus 0000:01:00.1: CardBus bridge found [1014:0185]
[ 5.397931] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.456460] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.457952] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.457968] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.458067] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 5.458244] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 5.458435] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.458524] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.458645] usb usb1: Product: UHCI Host Controller
[ 5.458721] usb usb1: Manufacturer: Linux 3.11.0-rc7 uhci_hcd
[ 5.458798] usb usb1: SerialNumber: 0000:00:1d.0
[ 5.459587] hub 1-0:1.0: USB hub found
[ 5.459674] hub 1-0:1.0: 2 ports detected
[ 5.460163] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.460173] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.460260] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 5.460416] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 5.460584] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.460665] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.460787] usb usb2: Product: UHCI Host Controller
[ 5.460862] usb usb2: Manufacturer: Linux 3.11.0-rc7 uhci_hcd
[ 5.460939] usb usb2: SerialNumber: 0000:00:1d.1
[ 5.461515] hub 2-0:1.0: USB hub found
[ 5.461596] hub 2-0:1.0: 2 ports detected
[ 5.461969] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.461979] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.462066] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 5.462219] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 5.462386] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.462468] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.462589] usb usb3: Product: UHCI Host Controller
[ 5.462665] usb usb3: Manufacturer: Linux 3.11.0-rc7 uhci_hcd
[ 5.462742] usb usb3: SerialNumber: 0000:00:1d.2
[ 5.463295] hub 3-0:1.0: USB hub found
[ 5.463624] hub 3-0:1.0: 2 ports detected
[ 5.472468] yenta_cardbus 0000:01:00.1: ISA IRQ mask 0x0418, PCI irq 5
[ 5.472562] yenta_cardbus 0000:01:00.1: Socket status: 30000006
[ 5.472653] yenta_cardbus 0000:01:00.1: pcmcia: parent PCI bridge window: [io 0x3000-0x7fff]
[ 5.472780] yenta_cardbus 0000:01:00.1: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xdfffffff]
[ 5.472907] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd0200000-0xdfffffff:
[ 5.473032] excluding 0xd0200000-0xd09fffff 0xd3a00000-0xdc1fffff 0xdfa00000-0xe01fffff
[ 5.473268] yenta_cardbus 0000:01:00.1: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf7ffffff pref]
[ 5.473396] pcmcia_socket pcmcia_socket1: cs: memory probe 0xf0000000-0xf7ffffff:
[ 5.473534] excluding 0xf0000000-0xf7ffffff
[ 5.653298] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 5.653691] excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[ 5.654187] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 5.654681] clean.
[ 5.654793] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 5.654936] clean.
[ 5.655420] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
[ 5.655516] excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[ 5.655729] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[ 5.655872] clean.
[ 5.655984] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
[ 5.656177] clean.
[ 5.875677] [drm] Initialized drm 1.1.0 20060810
[ 5.966496] snd_intel8x0m 0000:00:1f.6: setting latency timer to 64
[ 6.142628] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[ 6.712051] intel8x0_measure_ac97_clock: measured 55387 usecs (2662 samples)
[ 6.712148] intel8x0: clocking to 48000
[ 6.945880] [drm] Memory usable by graphics device = 128M
[ 6.945987] i915 0000:00:02.0: setting latency timer to 64
[ 6.948125] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.948500] [drm] Driver supports precise vblank timestamp query.
[ 6.949002] [drm] applying pipe a force quirk
[ 6.949365] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.959066] [drm] initialized overlay support
[ 6.977969] fbcon: inteldrmfb (fb0) is primary device
[ 7.056415] ------------[ cut here ]------------
[ 7.056535] WARNING: CPU: 0 PID: 199 at drivers/gpu/drm/i915/intel_display.c:1074 assert_pipe+0x80/0xe0 [i915]()
[ 7.056538] pipe A assertion failure (expected on, current off)
[ 7.056604] Modules linked in: i915(+) snd_intel8x0 i2c_algo_bit drm_kms_helper snd_intel8x0m snd_ac97_codec drm ac97_bus pcmcia snd_pcm uhci_hcd ehci_hcd usbcore snd_page_alloc thinkpad_acpi snd_seq snd_seq_device snd_timer snd yenta_socket pcmcia_rsrc airo e100 acpi_cpufreq mperf mii psmouse pcmcia_core processor firewire_ohci firewire_core video thermal battery rfkill crc_itu_t shpchp rng_core soundcore floppy i2c_i801 thermal_sys parport_pc parport serio_raw usb_common ac button evdev i2c_core pcspkr microcode
[ 7.056612] CPU: 0 PID: 199 Comm: modprobe Not tainted 3.11.0-rc7 #4
[ 7.056615] Hardware name: IBM 26724XG/26724XG, BIOS 1KET48WW (1.09 ) 06/16/2006
[ 7.056627] c130dc47 c102db05 e04b8528 def058b8 000000c7 e04b73e8 00000432 e0478580
[ 7.056635] e0478580 dc480000 00000041 00000000 00000000 c102db53 00000009 def058a0
[ 7.056644] e04b8528 def058b8 e0478580 e04b73e8 00000432 e04b8528 00000041 e04bdefb
[ 7.056646] Call Trace:
[ 7.056663] [<c130dc47>] ? dump_stack+0xa/0x13
[ 7.056676] [<c102db05>] ? warn_slowpath_common+0x75/0x90
[ 7.056732] [<e0478580>] ? assert_pipe+0x80/0xe0 [i915]
[ 7.056785] [<e0478580>] ? assert_pipe+0x80/0xe0 [i915]
[ 7.056793] [<c102db53>] ? warn_slowpath_fmt+0x33/0x40
[ 7.056846] [<e0478580>] ? assert_pipe+0x80/0xe0 [i915]
[ 7.056901] [<e04788ce>] ? intel_enable_pll+0xe/0xc0 [i915]
[ 7.056954] [<e0478dde>] ? i9xx_crtc_enable+0x5e/0x220 [i915]
[ 7.057010] [<e047eb2c>] ? __intel_set_mode+0x65c/0x11d0 [i915]
[ 7.057069] [<e04814bd>] ? intel_set_mode+0x1d/0x40 [i915]
[ 7.057125] [<e0481cc8>] ? intel_crtc_set_config+0x6f8/0x8e0 [i915]
[ 7.057155] [<e0150de3>] ? drm_mode_set_config_internal+0x43/0xb0 [drm]
[ 7.057167] [<e0364225>] ? drm_fb_helper_set_par+0x45/0xb0 [drm_kms_helper]
[ 7.057178] [<c11a6822>] ? fbcon_init+0x482/0x4d0
[ 7.057188] [<c11e2fae>] ? set_inverse_trans_unicode.isra.4+0xfe/0x120
[ 7.057196] [<c11e42d6>] ? visual_init+0x96/0xf0
[ 7.057203] [<c11e6444>] ? do_bind_con_driver+0x104/0x2d0
[ 7.057211] [<c1101f96>] ? sysfs_add_file_mode+0x76/0xa0
[ 7.057219] [<c11e6ae6>] ? do_take_over_console+0xf6/0x190
[ 7.057225] [<c11a2437>] ? do_fbcon_takeover+0x57/0xc0
[ 7.057234] [<c1047156>] ? notifier_call_chain+0x46/0x60
[ 7.057240] [<c1047387>] ? __blocking_notifier_call_chain+0x37/0x50
[ 7.057247] [<c10473b7>] ? blocking_notifier_call_chain+0x17/0x20
[ 7.057259] [<c119aa00>] ? register_framebuffer+0x1b0/0x2d0
[ 7.057269] [<e0363f35>] ? drm_fb_helper_initial_config+0x2e5/0x490 [drm_kms_helper]
[ 7.057287] [<e014fb33>] ? drm_mode_config_reset+0x93/0xb0 [drm]
[ 7.057297] [<c10af8d3>] ? __kmalloc+0xb3/0xe0
[ 7.057306] [<e03632f8>] ? drm_fb_helper_single_add_all_connectors+0x58/0xa0 [drm_kms_helper]
[ 7.057354] [<e045e667>] ? i915_driver_load+0xdc7/0xe00 [i915]
[ 7.057400] [<e045b6d0>] ? i915_emit_breadcrumb+0xe0/0xe0 [i915]
[ 7.057423] [<e014d529>] ? drm_get_pci_dev+0x129/0x230 [drm]
[ 7.057434] [<c118c2a3>] ? pci_device_probe+0x63/0xb0
[ 7.057442] [<c1200220>] ? __device_attach+0x30/0x30
[ 7.057447] [<c1200073>] ? driver_probe_device+0x53/0x1d0
[ 7.057456] [<c11721ea>] ? kobject_add_internal+0x7a/0x2a0
[ 7.057461] [<c1200291>] ? __driver_attach+0x71/0x80
[ 7.057474] [<c11fe91f>] ? bus_for_each_dev+0x3f/0x70
[ 7.057480] [<c11ffc76>] ? driver_attach+0x16/0x20
[ 7.057485] [<c1200220>] ? __device_attach+0x30/0x30
[ 7.057490] [<c11ff94f>] ? bus_add_driver+0x18f/0x230
[ 7.057497] [<c118b370>] ? pci_device_shutdown+0x50/0x50
[ 7.057503] [<c1200773>] ? driver_register+0x63/0x120
[ 7.057513] [<e04cd000>] ? 0xe04ccfff
[ 7.057520] [<c1000402>] ? do_one_initcall+0xe2/0x130
[ 7.057529] [<c10a56e0>] ? __vunmap+0x80/0xe0
[ 7.057536] [<c10af3fe>] ? kfree+0x8e/0xc0
[ 7.057541] [<c10a56c7>] ? __vunmap+0x67/0xe0
[ 7.057547] [<c10a56c7>] ? __vunmap+0x67/0xe0
[ 7.057553] [<c10af3fe>] ? kfree+0x8e/0xc0
[ 7.057563] [<c1067ddb>] ? load_module+0x151b/0x1cd0
[ 7.057573] [<c10685fb>] ? SyS_init_module+0x6b/0xa0
[ 7.057585] [<c13110c1>] ? sysenter_do_call+0x12/0x22
[ 7.057589] ---[ end trace eb2d805753ac7bfc ]---
[ 7.121008] Console: switching to colour frame buffer device 128x48
[ 7.444185] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.449459] i915 0000:00:02.0: registered panic notifier
[ 7.463258] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.493033] modprobe (199) used greatest stack depth: 5288 bytes left
[ 8.791178] Adding 1028092k swap on /dev/sda5. Priority:-1 extents:1 across:1028092k
[ 8.839671] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 9.157098] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.559484] fuse init (API version 7.22)
[ 9.635294] loop: module loaded
[ 13.389812] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.529988] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
[ 17.139984] Bluetooth: Core ver 2.16
[ 17.149446] NET: Registered protocol family 31
[ 17.155706] Bluetooth: HCI device and connection manager initialized
[ 17.162938] Bluetooth: HCI socket layer initialized
[ 17.169879] Bluetooth: L2CAP socket layer initialized
[ 17.176189] Bluetooth: SCO socket layer initialized
[ 17.250563] Bluetooth: RFCOMM TTY layer initialized
[ 17.256795] Bluetooth: RFCOMM socket layer initialized
[ 17.262697] Bluetooth: RFCOMM ver 1.11
[ 17.325204] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.330933] Bluetooth: BNEP filters: protocol multicast
[ 17.338496] Bluetooth: BNEP socket layer initialized
00:00.0 Host bridge [0600]: Intel Corporation 82830M/MG/MP Host Bridge [8086:3575] (rev 04)
Subsystem: IBM ThinkPad A/T/X Series [1014:021d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82830M/MG Integrated Graphics Controller [8086:3577] (rev 04) (prog-if 00 [VGA controller])
Subsystem: IBM ThinkPad A/T/X Series [1014:0513]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 82830M/MG Integrated Graphics Controller [8086:3577]
Subsystem: IBM ThinkPad A/T/X Series [1014:0513]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1d.0 USB controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #1 [8086:2482] (rev 02) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #2 [8086:2484] (rev 02) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #3 [8086:2487] (rev 02) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 42) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=07, sec-latency=64
I/O behind bridge: 00003000-00007fff
Memory behind bridge: d0200000-dfffffff
Prefetchable memory behind bridge: f0000000-f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801CAM ISA Bridge (LPC) [8086:248c] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801CAM IDE U100 Controller [8086:248a] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 1860 [size=16]
Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801CA/CAM SMBus Controller [8086:2483] (rev 02)
Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801CA/CAM AC'97 Audio Controller [8086:2485] (rev 02)
Subsystem: IBM ThinkPad A/T/X Series [1014:051c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Kernel driver in use: snd_intel8x0
00:1f.6 Modem [0703]: Intel Corporation 82801CA/CAM AC'97 Modem Controller [8086:2486] (rev 02) (prog-if 00 [Generic])
Subsystem: IBM ThinkPad A/T/X Series [1014:0223]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Kernel driver in use: snd_intel8x0m
01:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev a8)
Subsystem: IBM ThinkPad A/T/X Series [1014:0185]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
Memory window 0: f0000000-f3ffffff (prefetchable)
Memory window 1: d4000000-d7ffffff
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
01:00.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev a8)
Subsystem: IBM ThinkPad A/T/X Series [1014:0185]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 5
Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=06, subordinate=06, sec-latency=176
Memory window 0: f4000000-f7ffffff (prefetchable)
Memory window 1: d8000000-dbffffff
I/O window 0: 00003800-000038ff
I/O window 1: 00003c00-00003cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
01:00.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (prog-if 10 [OHCI])
Subsystem: IBM ThinkPad A/T/X Series [1014:0511]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin C routed to IRQ 11
Region 0: Memory at d0205000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
01:02.0 Network controller [0280]: Cisco Aironet Wireless Communications Cisco Aironet Wireless 802.11b [14b9:a504]
Subsystem: Cisco Aironet Wireless Communications Device [14b9:5000]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 7000 [size=256]
Region 1: Memory at d0200000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at d0400000 (32-bit, non-prefetchable) [size=4M]
[virtual] Expansion ROM at d0800000 [disabled] [size=2M]
Capabilities: <access denied>
Kernel driver in use: airo
01:08.0 Ethernet controller [0200]: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller [8086:1031] (rev 42)
Subsystem: IBM ThinkPad A/T/X Series [1014:0209]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0204000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 7400 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
--
Meelis Roos (mroos@ut.ee) http://www.cs.ut.ee/~mroos/
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: i915 pipe A assertion failure (expected on, current off)
2013-08-26 13:14 i915 pipe A assertion failure (expected on, current off) Meelis Roos
@ 2013-09-21 15:29 ` Meelis Roos
2013-09-21 15:48 ` Daniel Vetter
[not found] ` <4319_1379778790_523DC0E3_4319_13540_1_CAKMK7uHynzChMurTLAYMfeRF07aDJxes-6eSO1iDbrET8xD84Q@mail.gmail.com>
0 siblings, 2 replies; 13+ messages in thread
From: Meelis Roos @ 2013-09-21 15:29 UTC (permalink / raw)
To: Daniel Vetter
Cc: dri-devel, Linux Kernel list, Chris Wilson, Ville Syrjälä
> Tried 3.11-rc7 on Thinkpad X30 (first 3-11-rc tried on this hw). Works
> but i915 gives strange assertion failure with WARNING stack trace. This
> is new since 3.10.
It is still there with 3.12-rc1 but now I git around to bisecting it.
This is the commit that introduces the warning.
commit 9f11a9e4e50006b615ba94722dfc33ced89664cf
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jun 13 00:54:58 2013 +0200
drm/i915: set up PIPECONF explicitly for i9xx/vlv platforms
Same reasons as for the previous patch, just no bug report about
anything going wrong yet: We only support exactly the mode we program,
so don't leave any stale BIOS state behind.
Again this will be fun to properly track for fastboot.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
>
> The only monitor is internal LCD. lspci -vvvnn is also below.
>
> [ 0.000000] Linux version 3.11.0-rc7 (mroos@x30) (gcc version 4.8.1 (Debian 4.8.1-5) ) #4 Mon Aug 26 11:42:19 EEST 2013
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f76ffff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000001f770000-0x000000001f77dfff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x000000001f77e000-0x000000001f77ffff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x000000001f780000-0x000000001fffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
> [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
> [ 0.000000] SMBIOS 2.3 present.
> [ 0.000000] DMI: IBM 26724XG/26724XG, BIOS 1KET48WW (1.09 ) 06/16/2006
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] e820: last_pfn = 0x1f770 max_arch_pfn = 0x100000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-CFFFF write-protect
> [ 0.000000] D0000-DBFFF uncachable
> [ 0.000000] DC000-DFFFF write-back
> [ 0.000000] E0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask FE0000000 write-back
> [ 0.000000] 1 base 01FF80000 mask FFFF80000 uncachable
> [ 0.000000] 2 disabled
> [ 0.000000] 3 disabled
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] PAT not supported by CPU.
> [ 0.000000] original variable MTRRs
> [ 0.000000] reg 0, base: 0GB, range: 512MB, type WB
> [ 0.000000] reg 1, base: 523776KB, range: 512KB, type UC
> [ 0.000000] total RAM covered: 511M
> [ 0.000000] Found optimal setting for mtrr clean up
> [ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 2 lose cover RAM: 0G
> [ 0.000000] New variable MTRRs
> [ 0.000000] reg 0, base: 0GB, range: 512MB, type WB
> [ 0.000000] reg 1, base: 523776KB, range: 512KB, type UC
> [ 0.000000] initial memory mapped: [mem 0x00000000-0x017fffff]
> [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1f3fffff]
> [ 0.000000] [mem 0x1f000000-0x1f3fffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x18000000-0x1effffff]
> [ 0.000000] [mem 0x18000000-0x1effffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0x17ffffff]
> [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
> [ 0.000000] [mem 0x00400000-0x17ffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1f76ffff]
> [ 0.000000] [mem 0x1f400000-0x1f76ffff] page 4k
> [ 0.000000] BRK [0x014da000, 0x014dafff] PGTABLE
> [ 0.000000] ACPI: RSDP 000f7090 00024 (v02 IBM )
> [ 0.000000] ACPI: XSDT 1f772a76 0004C (v01 IBM TP-1K 00001090 LTP 00000000)
> [ 0.000000] ACPI: FACP 1f772b00 00081 (v01 IBM TP-1K 00001090 IBM 00000001)
> [ 0.000000] ACPI: DSDT 1f772be7 0B22C (v01 IBM TP-1K 00001090 MSFT 0100000D)
> [ 0.000000] ACPI: FACS 1f77f000 00040
> [ 0.000000] ACPI: SSDT 1f772bb4 00033 (v01 IBM TP-1K 00001090 MSFT 0100000D)
> [ 0.000000] ACPI: ECDT 1f77de13 00052 (v01 IBM TP-1K 00001090 IBM 00000001)
> [ 0.000000] ACPI: TCPA 1f77de65 00032 (v01 IBM TP-1K 00001090 PTL 00000001)
> [ 0.000000] ACPI: BOOT 1f77dfd8 00028 (v01 IBM TP-1K 00001090 LTP 00000001)
> [ 0.000000] 503MB LOWMEM available.
> [ 0.000000] mapped low ram: 0 - 1f770000
> [ 0.000000] low ram: 0 - 1f770000
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] Normal [mem 0x01000000-0x1f76ffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
> [ 0.000000] node 0: [mem 0x00100000-0x1f76ffff]
> [ 0.000000] On node 0 totalpages: 128782
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
> [ 0.000000] Normal zone: 975 pages used for memmap
> [ 0.000000] Normal zone: 124784 pages, LIFO batch:31
> [ 0.000000] Using APIC driver default
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
> [ 0.000000] Local APIC disabled by BIOS -- reenabling.
> [ 0.000000] Found and enabled local APIC!
> [ 0.000000] nr_irqs_gsi: 16
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
> [ 0.000000] e820: [mem 0x20000000-0xff7fffff] available for PCI devices
> [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
> [ 0.000000] pcpu-alloc: [0] 0
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127775
> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-rc7 root=/dev/sda1 ro lapic
> [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
> [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 0.000000] Initializing CPU#0
> [ 0.000000] Memory: 505532K/515128K available (3143K kernel code, 231K rwdata, 920K rodata, 316K init, 320K bss, 9596K reserved)
> [ 0.000000] virtual kernel memory layout:
> [ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
> [ 0.000000] vmalloc : 0xdff70000 - 0xfffa0000 ( 512 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xdf770000 ( 503 MB)
> [ 0.000000] .init : 0xc1434000 - 0xc1483000 ( 316 kB)
> [ 0.000000] .data : 0xc1312179 - 0xc1433c00 (1158 kB)
> [ 0.000000] .text : 0xc1000000 - 0xc1312179 (3144 kB)
> [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
> [ 0.000000] CPU 0 irqstacks, hard=dec06000 soft=dec08000
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] tsc: Fast TSC calibration using PIT
> [ 0.000000] tsc: Detected 1196.090 MHz processor
> [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2392.18 BogoMIPS (lpj=4784360)
> [ 0.008146] pid_max: default: 32768 minimum: 301
> [ 0.008320] Mount-cache hash table entries: 512
> [ 0.012344] mce: CPU supports 5 MCE banks
> [ 0.012465] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
> [ 0.012465] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
> [ 0.012465] tlb_flushall_shift: 6
> [ 0.012635] CPU: Mobile Intel(R) Pentium(R) III CPU - M 1200MHz (fam: 06, model: 0b, stepping: 04)
> [ 0.012852] ACPI: Core revision 20130517
> [ 0.022371] ACPI: All ACPI Tables successfully acquired
> [ 0.022765] ACPI: setting ELCR to 0200 (from 0820)
> [ 0.024201] Performance Events: p6 PMU driver.
> [ 0.028011] ... version: 0
> [ 0.028331] ... bit width: 32
> [ 0.028650] ... generic registers: 2
> [ 0.028960] ... value mask: 00000000ffffffff
> [ 0.029291] ... max period: 000000007fffffff
> [ 0.029612] ... fixed-purpose events: 0
> [ 0.029931] ... event mask: 0000000000000003
> [ 0.030548] Enabling APIC mode: Flat. Using 0 I/O APICs
> [ 0.032000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> [ 0.032000] devtmpfs: initialized
> [ 0.032000] PM: Registering ACPI NVS region [mem 0x1f77e000-0x1f77ffff] (8192 bytes)
> [ 0.032000] NET: Registered protocol family 16
> [ 0.032000] ACPI: bus type PCI registered
> [ 0.032000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.032000] PCI: PCI BIOS revision 2.10 entry at 0xfd90e, last bus=7
> [ 0.032000] PCI: Using configuration type 1 for base access
> [ 0.032000] bio: create slab <bio-0> at 0
> [ 0.032000] ACPI: Added _OSI(Module Device)
> [ 0.032000] ACPI: Added _OSI(Processor Device)
> [ 0.032000] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.032000] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.033425] ACPI: EC: EC description table is found, configuring boot EC
> [ 0.044785] ACPI: Interpreter enabled
> [ 0.044785] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
> [ 0.044858] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
> [ 0.045037] ACPI: (supports S0 S3 S4 S5)
> [ 0.045106] ACPI: Using PIC for interrupt routing
> [ 0.045210] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
> [ 0.049355] ACPI: ACPI Dock Station Driver: 3 docks/bays found
> [ 0.056823] ACPI: Power Resource [PUBS] (on)
> [ 0.064378] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.064879] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
> [ 0.065373] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.065866] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.066630] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.067335] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
> [ 0.068187] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
> [ 0.069217] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
> [ 0.070150] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.070569] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
> [ 0.070576] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
> [ 0.070582] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
> [ 0.070589] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
> [ 0.070596] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
> [ 0.070602] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
> [ 0.070609] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
> [ 0.070615] PCI: root bus 00: using default resources
> [ 0.070624] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
> [ 0.071398] PCI host bridge to bus 0000:00
> [ 0.071723] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.072006] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
> [ 0.072349] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
> [ 0.072715] pci 0000:00:00.0: [8086:3575] type 00 class 0x060000
> [ 0.072870] pci 0000:00:02.0: [8086:3577] type 00 class 0x030000
> [ 0.072886] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
> [ 0.072897] pci 0000:00:02.0: reg 0x14: [mem 0xd0000000-0xd007ffff]
> [ 0.072932] pci 0000:00:02.0: supports D1
> [ 0.073044] pci 0000:00:02.1: [8086:3577] type 00 class 0x038000
> [ 0.073058] pci 0000:00:02.1: reg 0x10: [mem 0xe8000000-0xefffffff pref]
> [ 0.073067] pci 0000:00:02.1: reg 0x14: [mem 0xd0080000-0xd00fffff]
> [ 0.073100] pci 0000:00:02.1: supports D1
> [ 0.073229] pci 0000:00:1d.0: [8086:2482] type 00 class 0x0c0300
> [ 0.073270] pci 0000:00:1d.0: reg 0x20: [io 0x1800-0x181f]
> [ 0.073453] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 0.073453] pci 0000:00:1d.1: [8086:2484] type 00 class 0x0c0300
> [ 0.073453] pci 0000:00:1d.1: reg 0x20: [io 0x1820-0x183f]
> [ 0.073453] pci 0000:00:1d.1: System wakeup disabled by ACPI
> [ 0.073453] pci 0000:00:1d.2: [8086:2487] type 00 class 0x0c0300
> [ 0.073453] pci 0000:00:1d.2: reg 0x20: [io 0x1840-0x185f]
> [ 0.073453] pci 0000:00:1d.2: System wakeup disabled by ACPI
> [ 0.073453] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400
> [ 0.073453] pci 0000:00:1e.0: System wakeup disabled by ACPI
> [ 0.073453] pci 0000:00:1f.0: [8086:248c] type 00 class 0x060100
> [ 0.073453] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
> [ 0.073453] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO
> [ 0.073453] pci 0000:00:1f.1: [8086:248a] type 00 class 0x01018a
> [ 0.073453] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
> [ 0.073453] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
> [ 0.073453] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
> [ 0.073453] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
> [ 0.073453] pci 0000:00:1f.1: reg 0x20: [io 0x1860-0x186f]
> [ 0.073453] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
> [ 0.073564] pci 0000:00:1f.3: [8086:2483] type 00 class 0x0c0500
> [ 0.073605] pci 0000:00:1f.3: reg 0x20: [io 0x1880-0x189f]
> [ 0.073722] pci 0000:00:1f.5: [8086:2485] type 00 class 0x040100
> [ 0.073739] pci 0000:00:1f.5: reg 0x10: [io 0x1c00-0x1cff]
> [ 0.073752] pci 0000:00:1f.5: reg 0x14: [io 0x18c0-0x18ff]
> [ 0.076052] pci 0000:00:1f.6: [8086:2486] type 00 class 0x070300
> [ 0.076069] pci 0000:00:1f.6: reg 0x10: [io 0x2400-0x24ff]
> [ 0.076082] pci 0000:00:1f.6: reg 0x14: [io 0x2000-0x207f]
> [ 0.076183] pci 0000:00:1f.6: System wakeup disabled by ACPI
> [ 0.076438] acpiphp: Slot [1] registered
> [ 0.076528] pci 0000:01:00.0: [1180:0476] type 02 class 0x060700
> [ 0.076546] pci 0000:01:00.0: reg 0x10: [mem 0x50000000-0x50000fff]
> [ 0.076572] pci 0000:01:00.0: supports D1 D2
> [ 0.076578] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.076695] pci 0000:01:00.1: [1180:0476] type 02 class 0x060700
> [ 0.076714] pci 0000:01:00.1: reg 0x10: [mem 0x50100000-0x50100fff]
> [ 0.076740] pci 0000:01:00.1: supports D1 D2
> [ 0.076746] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.076842] pci 0000:01:00.2: [1180:0552] type 00 class 0x0c0010
> [ 0.076860] pci 0000:01:00.2: reg 0x10: [mem 0xd0205000-0xd02057ff]
> [ 0.076919] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
> [ 0.077024] pci 0000:01:02.0: [14b9:a504] type 00 class 0x028000
> [ 0.077043] pci 0000:01:02.0: reg 0x10: [io 0x7000-0x70ff]
> [ 0.077055] pci 0000:01:02.0: reg 0x14: [mem 0xd0200000-0xd0203fff]
> [ 0.077067] pci 0000:01:02.0: reg 0x18: [mem 0xd0400000-0xd07fffff]
> [ 0.077095] pci 0000:01:02.0: reg 0x30: [mem 0x00000000-0x001fffff pref]
> [ 0.077125] pci 0000:01:02.0: supports D1 D2
> [ 0.077210] pci 0000:01:08.0: [8086:1031] type 00 class 0x020000
> [ 0.077228] pci 0000:01:08.0: reg 0x10: [mem 0xd0204000-0xd0204fff]
> [ 0.077240] pci 0000:01:08.0: reg 0x14: [io 0x7400-0x743f]
> [ 0.077292] pci 0000:01:08.0: supports D1 D2
> [ 0.077297] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.077404] pci 0000:00:1e.0: PCI bridge to [bus 01-07] (subtractive decode)
> [ 0.077483] pci 0000:00:1e.0: bridge window [io 0x3000-0x7fff]
> [ 0.077491] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xdfffffff]
> [ 0.077500] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
> [ 0.077506] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
> [ 0.077512] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
> [ 0.077578] pci_bus 0000:02: busn_res: can not insert [bus 02-ff] under [bus 01-07] (conflicts with (null) [bus 01-07])
> [ 0.077588] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
> [ 0.077655] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 01-07] (conflicts with (null) [bus 01-07])
> [ 0.077664] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
> [ 0.077678] pci_bus 0000:00: on NUMA node 0
> [ 0.077686] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
> [ 0.077813] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
> [ 0.078355] ACPI: \_SB_.PCI0: notify handler is installed
> [ 0.078355] Found 1 acpi root devices
> [ 0.078355] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
> [ 0.080164] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.080285] vgaarb: loaded
> [ 0.080351] vgaarb: bridge control possible 0000:00:02.0
> [ 0.080596] SCSI subsystem initialized
> [ 0.080667] ACPI: bus type ATA registered
> [ 0.080844] libata version 3.00 loaded.
> [ 0.080912] PCI: Using ACPI for IRQ routing
> [ 0.081084] PCI: pci_cache_line_size set to 32 bytes
> [ 0.081133] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
> [ 0.081139] e820: reserve RAM buffer [mem 0x1f770000-0x1fffffff]
> [ 0.081400] Switched to clocksource refined-jiffies
> [ 0.081533] pnp: PnP ACPI init
> [ 0.081620] ACPI: bus type PNP registered
> [ 0.082745] pnp 00:00: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.083411] pnp 00:00: disabling [mem 0x000c0000-0x000c3fff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.084013] pnp 00:00: disabling [mem 0x000c4000-0x000c7fff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.084678] pnp 00:00: disabling [mem 0x000c8000-0x000cbfff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.085338] pnp 00:00: disabling [mem 0x000cc000-0x000cffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.086001] pnp 00:00: disabling [mem 0x000d0000-0x000cffff disabled] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.086672] pnp 00:00: disabling [mem 0x000d4000-0x000d3fff disabled] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.087324] pnp 00:00: disabling [mem 0x000d8000-0x000d7fff disabled] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.088010] pnp 00:00: disabling [mem 0x000dc000-0x000dffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.088666] pnp 00:00: disabling [mem 0x000e0000-0x000e3fff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.089328] pnp 00:00: disabling [mem 0x000e4000-0x000e7fff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.089989] pnp 00:00: disabling [mem 0x000e8000-0x000ebfff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.090504] pnp 00:00: disabling [mem 0x000ec000-0x000effff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.091564] pnp 00:00: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.091691] pnp 00:00: disabling [mem 0x00100000-0x1fffffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
> [ 0.091885] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
> [ 0.092009] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.092160] system 00:01: [io 0x1000-0x107f] could not be reserved
> [ 0.092237] system 00:01: [io 0x1180-0x11bf] has been reserved
> [ 0.092311] system 00:01: [io 0x15e0-0x15ef] has been reserved
> [ 0.092385] system 00:01: [io 0x1600-0x167f] has been reserved
> [ 0.092460] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.092494] pnp 00:02: [dma 4]
> [ 0.092544] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 0.092606] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
> [ 0.092672] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 0.092738] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.092801] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
> [ 0.092865] pnp 00:07: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
> [ 0.092941] pnp 00:08: [dma 2]
> [ 0.093016] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
> [ 0.093312] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 0.093605] pnp 00:0a: [dma 0]
> [ 0.093754] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
> [ 0.093941] pnp 00:0b: [dma 3]
> [ 0.094102] pnp 00:0b: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active)
> [ 0.094162] pnp: PnP ACPI: found 12 devices
> [ 0.094162] ACPI: bus type PNP unregistered
> [ 0.133330] Switched to clocksource acpi_pm
> [ 0.133702] pci 0000:00:1f.0: BAR 7: [io 0x1000-0x107f] has bogus alignment
> [ 0.134072] pci 0000:00:1f.1: BAR 5: assigned [mem 0x20000000-0x200003ff]
> [ 0.134425] pci 0000:01:00.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
> [ 0.134432] pci 0000:01:00.0: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
> [ 0.134440] pci 0000:01:00.1: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
> [ 0.134447] pci 0000:01:00.1: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
> [ 0.134453] pci 0000:01:00.0: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100
> [ 0.134459] pci 0000:01:00.0: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100
> [ 0.134466] pci 0000:01:00.1: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100
> [ 0.134472] pci 0000:01:00.1: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100
> [ 0.134479] pci 0000:01:00.0: BAR 9: assigned [mem 0xf0000000-0xf3ffffff pref]
> [ 0.135081] pci 0000:01:00.0: BAR 10: assigned [mem 0xd4000000-0xd7ffffff]
> [ 0.135422] pci 0000:01:00.1: BAR 9: assigned [mem 0xf4000000-0xf7ffffff pref]
> [ 0.135422] pci 0000:01:00.1: BAR 10: assigned [mem 0xd8000000-0xdbffffff]
> [ 0.135422] pci 0000:01:02.0: BAR 6: assigned [mem 0xd0800000-0xd09fffff pref]
> [ 0.135685] pci 0000:01:00.0: BAR 7: assigned [io 0x3000-0x30ff]
> [ 0.136036] pci 0000:01:00.0: BAR 8: assigned [io 0x3400-0x34ff]
> [ 0.136376] pci 0000:01:00.1: BAR 7: assigned [io 0x3800-0x38ff]
> [ 0.136726] pci 0000:01:00.1: BAR 8: assigned [io 0x3c00-0x3cff]
> [ 0.137081] pci 0000:01:00.0: CardBus bridge to [bus 02-05]
> [ 0.137411] pci 0000:01:00.0: bridge window [io 0x3000-0x30ff]
> [ 0.137761] pci 0000:01:00.0: bridge window [io 0x3400-0x34ff]
> [ 0.138113] pci 0000:01:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
> [ 0.138724] pci 0000:01:00.0: bridge window [mem 0xd4000000-0xd7ffffff]
> [ 0.139065] pci 0000:01:00.1: CardBus bridge to [bus 06]
> [ 0.139266] pci 0000:01:00.1: bridge window [io 0x3800-0x38ff]
> [ 0.139341] pci 0000:01:00.1: bridge window [io 0x3c00-0x3cff]
> [ 0.139416] pci 0000:01:00.1: bridge window [mem 0xf4000000-0xf7ffffff pref]
> [ 0.139535] pci 0000:01:00.1: bridge window [mem 0xd8000000-0xdbffffff]
> [ 0.139612] pci 0000:00:1e.0: PCI bridge to [bus 01-07]
> [ 0.139686] pci 0000:00:1e.0: bridge window [io 0x3000-0x7fff]
> [ 0.139763] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xdfffffff]
> [ 0.139840] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
> [ 0.139974] pci 0000:00:1e.0: setting latency timer to 64
> [ 0.140414] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
> [ 0.140489] PCI: setting IRQ 11 as level-triggered
> [ 0.140824] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
> [ 0.140896] PCI: setting IRQ 5 as level-triggered
> [ 0.140909] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
> [ 0.140915] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
> [ 0.140921] pci_bus 0000:01: resource 0 [io 0x3000-0x7fff]
> [ 0.140927] pci_bus 0000:01: resource 1 [mem 0xd0200000-0xdfffffff]
> [ 0.140933] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
> [ 0.140939] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
> [ 0.140945] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
> [ 0.140951] pci_bus 0000:02: resource 0 [io 0x3000-0x30ff]
> [ 0.140956] pci_bus 0000:02: resource 1 [io 0x3400-0x34ff]
> [ 0.140963] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf3ffffff pref]
> [ 0.140968] pci_bus 0000:02: resource 3 [mem 0xd4000000-0xd7ffffff]
> [ 0.140975] pci_bus 0000:06: resource 0 [io 0x3800-0x38ff]
> [ 0.140980] pci_bus 0000:06: resource 1 [io 0x3c00-0x3cff]
> [ 0.140986] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf7ffffff pref]
> [ 0.140992] pci_bus 0000:06: resource 3 [mem 0xd8000000-0xdbffffff]
> [ 0.141084] NET: Registered protocol family 2
> [ 0.141532] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.141677] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.141786] TCP: Hash tables configured (established 4096 bind 4096)
> [ 0.141911] TCP: reno registered
> [ 0.141984] UDP hash table entries: 256 (order: 0, 4096 bytes)
> [ 0.142065] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
> [ 0.142263] NET: Registered protocol family 1
> [ 0.142368] pci 0000:00:02.0: Boot video device
> [ 0.142393] pci 0000:00:1d.0: power state changed by ACPI to D0
> [ 0.142578] pci 0000:00:1d.1: power state changed by ACPI to D0
> [ 0.143017] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
> [ 0.143455] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> [ 0.143623] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
> [ 0.143744] PCI: CLS 32 bytes, default 32
> [ 0.143834] Simple Boot Flag at 0x35 set to 0x1
> [ 0.144411] audit: initializing netlink socket (disabled)
> [ 0.144505] type=2000 audit(1377507957.144:1): initialized
> [ 0.145028] HugeTLB registered 4 MB page size, pre-allocated 0 pages
> [ 0.148706] msgmni has been set to 987
> [ 0.149299] cryptomgr_test (19) used greatest stack depth: 7688 bytes left
> [ 0.149826] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> [ 0.150435] io scheduler noop registered
> [ 0.150872] io scheduler cfq registered (default)
> [ 0.151271] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.151904] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [ 0.152568] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
> [ 0.153167] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
> [ 0.154261] Non-volatile memory driver v1.3
> [ 0.154587] Linux agpgart interface v0.103
> [ 0.154926] agpgart-intel 0000:00:00.0: Intel 830M Chipset
> [ 0.155294] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
> [ 0.156713] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
> [ 0.157122] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
> [ 0.157333] ata_piix 0000:00:1f.1: version 2.13
> [ 0.157352] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
> [ 0.157554] ata_piix 0000:00:1f.1: setting latency timer to 64
> [ 0.158116] scsi0 : ata_piix
> [ 0.158664] scsi1 : ata_piix
> [ 0.159037] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
> [ 0.159113] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
> [ 0.159322] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
> [ 0.165066] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.165388] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 0.166074] mousedev: PS/2 mouse device common for all mice
> [ 0.166471] rtc_cmos 00:05: RTC can wake from S4
> [ 0.166964] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
> [ 0.167335] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram
> [ 0.167704] cpuidle: using governor ladder
> [ 0.168038] cpuidle: using governor menu
> [ 0.168573] TCP: cubic registered
> [ 0.169159] NET: Registered protocol family 10
> [ 0.169933] NET: Registered protocol family 17
> [ 0.170499] Using IPI Shortcut mode
> [ 0.170912] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
> [ 0.171793] PM: Hibernation image not present or could not be loaded.
> [ 0.171820] registered taskstats version 1
> [ 0.172636] rtc_cmos 00:05: setting system clock to 2013-08-26 09:05:57 UTC (1377507957)
> [ 0.328465] ata1.00: ATA-7: ST96023A, 3.06, max UDMA/100
> [ 0.328541] ata1.00: 117210240 sectors, multi 16: LBA48
> [ 0.344316] ata1.00: configured for UDMA/100
> [ 0.344613] scsi 0:0:0:0: Direct-Access ATA ST96023A 3.06 PQ: 0 ANSI: 5
> [ 0.345109] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
> [ 0.345327] sd 0:0:0:0: [sda] Write Protect is off
> [ 0.345401] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 0.345449] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 0.396314] sda: sda1 sda2 < sda5 >
> [ 0.396869] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 0.420066] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
> [ 0.420895] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
> [ 0.450246] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
> [ 0.450884] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
> [ 0.485577] devtmpfs: mounted
> [ 0.486321] Freeing unused kernel memory: 316K (c1434000 - c1483000)
> [ 0.486836] Write protecting the kernel text: 3148k
> [ 0.487194] Write protecting the kernel read-only data: 924k
> [ 1.144035] tsc: Refined TSC clocksource calibration: 1196.015 MHz
> [ 1.197248] stty (36) used greatest stack depth: 6404 bytes left
> [ 2.144103] Switched to clocksource tsc
> [ 2.223101] udevd[147]: starting version 175
> [ 3.237720] microcode: CPU0 sig=0x6b4, pf=0x20, revision=0x2
> [ 3.309703] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> [ 3.310119] modprobe (234) used greatest stack depth: 6200 bytes left
> [ 3.354912] input: PC Speaker as /devices/platform/pcspkr/input/input1
> [ 3.414089] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
> [ 3.417158] ACPI: Lid Switch [LID]
> [ 3.418553] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
> [ 3.419385] ACPI: Sleep Button [SLPB]
> [ 3.419940] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
> [ 3.420738] ACPI: Power Button [PWRF]
> [ 3.426984] ACPI: AC Adapter [AC] (on-line)
> [ 3.428358] modprobe (293) used greatest stack depth: 6044 bytes left
> [ 3.499926] parport_pc 00:0a: reported by Plug and Play ACPI
> [ 3.500379] parport0: PC-style at 0x3bc (0x7bc), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> [ 3.554332] Floppy drive(s): fd0 is 1.44M
> [ 3.571043] FDC 0 is a National Semiconductor PC87306
> [ 3.607731] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 3.632098] intel_rng: FWH not detected
> [ 3.750150] ACPI: Battery Slot [BAT0] (battery absent)
> [ 3.775031] thermal LNXTHERM:00: registered as thermal_zone0
> [ 3.775119] ACPI: Thermal Zone [THM0] (59 C)
> [ 3.786169] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
> [ 3.786657] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input5
> [ 3.952149] firewire_ohci 0000:01:00.2: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
> [ 3.973039] ACPI: Requesting acpi_cpufreq
> [ 3.973360] tsc: Marking TSC unstable due to TSC halts in idle
> [ 3.973453] ACPI: acpi_idle registered with cpuidle
> [ 3.976825] Switched to clocksource acpi_pm
> [ 4.214250] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
> [ 4.214607] e100: Copyright(c) 1999-2006 Intel Corporation
> [ 4.216293] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
> [ 4.240240] e100 0000:01:08.0 eth0: addr 0xd0204000, irq 11, MAC addr 00:09:6b:a0:c7:55
> [ 4.255242] airo(): Probing for PCI adapters
> [ 4.256498] airo(): Found an MPI350 card
> [ 4.452263] firewire_core 0000:01:00.2: created device fw0: GUID 00061b0201022780, S400
> [ 4.479584] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
> [ 4.596288] thinkpad_acpi: ThinkPad ACPI Extras v0.24
> [ 4.596375] thinkpad_acpi: http://ibm-acpi.sf.net/
> [ 4.596444] thinkpad_acpi: ThinkPad BIOS 1KET48WW (1.09 ), EC 1KHT18WW-1.06
> [ 4.599842] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
> [ 4.615588] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
> [ 4.621789] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
> [ 4.793788] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
> [ 4.810093] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
> [ 5.203639] airo(eth1): Firmware version 5.2.19
> [ 5.204037] airo(eth1): WPA unsupported with firmware versions older than 5.30.17.
> [ 5.204665] airo(eth1): MAC enabled 00:02:8a:25:27:a8
> [ 5.204921] yenta_cardbus 0000:01:00.0: CardBus bridge found [1014:0185]
> [ 5.205099] airo(): Finished probing for PCI adapters
> [ 5.206201] modprobe (309) used greatest stack depth: 5752 bytes left
> [ 5.228109] ACPI: bus type USB registered
> [ 5.229256] usbcore: registered new interface driver usbfs
> [ 5.229718] usbcore: registered new interface driver hub
> [ 5.229923] usbcore: registered new device driver usb
> [ 5.332495] yenta_cardbus 0000:01:00.0: ISA IRQ mask 0x0418, PCI irq 11
> [ 5.332873] yenta_cardbus 0000:01:00.0: Socket status: 30000006
> [ 5.333235] yenta_cardbus 0000:01:00.0: pcmcia: parent PCI bridge window: [io 0x3000-0x7fff]
> [ 5.333877] yenta_cardbus 0000:01:00.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xdfffffff]
> [ 5.334539] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xdfffffff:
> [ 5.335181] excluding 0xd0200000-0xd09fffff 0xd3a00000-0xdc1fffff 0xdfa00000-0xe01fffff
> [ 5.335984] yenta_cardbus 0000:01:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf7ffffff pref]
> [ 5.342470] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf7ffffff:
> [ 5.342634] excluding 0xf0000000-0xf7ffffff
> [ 5.346456] yenta_cardbus 0000:01:00.1: CardBus bridge found [1014:0185]
> [ 5.397931] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 5.456460] uhci_hcd: USB Universal Host Controller Interface driver
> [ 5.457952] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 5.457968] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 5.458067] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> [ 5.458244] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
> [ 5.458435] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
> [ 5.458524] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.458645] usb usb1: Product: UHCI Host Controller
> [ 5.458721] usb usb1: Manufacturer: Linux 3.11.0-rc7 uhci_hcd
> [ 5.458798] usb usb1: SerialNumber: 0000:00:1d.0
> [ 5.459587] hub 1-0:1.0: USB hub found
> [ 5.459674] hub 1-0:1.0: 2 ports detected
> [ 5.460163] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 5.460173] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 5.460260] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> [ 5.460416] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
> [ 5.460584] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> [ 5.460665] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.460787] usb usb2: Product: UHCI Host Controller
> [ 5.460862] usb usb2: Manufacturer: Linux 3.11.0-rc7 uhci_hcd
> [ 5.460939] usb usb2: SerialNumber: 0000:00:1d.1
> [ 5.461515] hub 2-0:1.0: USB hub found
> [ 5.461596] hub 2-0:1.0: 2 ports detected
> [ 5.461969] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 5.461979] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 5.462066] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> [ 5.462219] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
> [ 5.462386] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 5.462468] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.462589] usb usb3: Product: UHCI Host Controller
> [ 5.462665] usb usb3: Manufacturer: Linux 3.11.0-rc7 uhci_hcd
> [ 5.462742] usb usb3: SerialNumber: 0000:00:1d.2
> [ 5.463295] hub 3-0:1.0: USB hub found
> [ 5.463624] hub 3-0:1.0: 2 ports detected
> [ 5.472468] yenta_cardbus 0000:01:00.1: ISA IRQ mask 0x0418, PCI irq 5
> [ 5.472562] yenta_cardbus 0000:01:00.1: Socket status: 30000006
> [ 5.472653] yenta_cardbus 0000:01:00.1: pcmcia: parent PCI bridge window: [io 0x3000-0x7fff]
> [ 5.472780] yenta_cardbus 0000:01:00.1: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xdfffffff]
> [ 5.472907] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd0200000-0xdfffffff:
> [ 5.473032] excluding 0xd0200000-0xd09fffff 0xd3a00000-0xdc1fffff 0xdfa00000-0xe01fffff
> [ 5.473268] yenta_cardbus 0000:01:00.1: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf7ffffff pref]
> [ 5.473396] pcmcia_socket pcmcia_socket1: cs: memory probe 0xf0000000-0xf7ffffff:
> [ 5.473534] excluding 0xf0000000-0xf7ffffff
> [ 5.653298] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
> [ 5.653691] excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
> [ 5.654187] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
> [ 5.654681] clean.
> [ 5.654793] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
> [ 5.654936] clean.
> [ 5.655420] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
> [ 5.655516] excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
> [ 5.655729] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
> [ 5.655872] clean.
> [ 5.655984] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
> [ 5.656177] clean.
> [ 5.875677] [drm] Initialized drm 1.1.0 20060810
> [ 5.966496] snd_intel8x0m 0000:00:1f.6: setting latency timer to 64
> [ 6.142628] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
> [ 6.712051] intel8x0_measure_ac97_clock: measured 55387 usecs (2662 samples)
> [ 6.712148] intel8x0: clocking to 48000
> [ 6.945880] [drm] Memory usable by graphics device = 128M
> [ 6.945987] i915 0000:00:02.0: setting latency timer to 64
> [ 6.948125] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [ 6.948500] [drm] Driver supports precise vblank timestamp query.
> [ 6.949002] [drm] applying pipe a force quirk
> [ 6.949365] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 6.959066] [drm] initialized overlay support
> [ 6.977969] fbcon: inteldrmfb (fb0) is primary device
> [ 7.056415] ------------[ cut here ]------------
> [ 7.056535] WARNING: CPU: 0 PID: 199 at drivers/gpu/drm/i915/intel_display.c:1074 assert_pipe+0x80/0xe0 [i915]()
> [ 7.056538] pipe A assertion failure (expected on, current off)
> [ 7.056604] Modules linked in: i915(+) snd_intel8x0 i2c_algo_bit drm_kms_helper snd_intel8x0m snd_ac97_codec drm ac97_bus pcmcia snd_pcm uhci_hcd ehci_hcd usbcore snd_page_alloc thinkpad_acpi snd_seq snd_seq_device snd_timer snd yenta_socket pcmcia_rsrc airo e100 acpi_cpufreq mperf mii psmouse pcmcia_core processor firewire_ohci firewire_core video thermal battery rfkill crc_itu_t shpchp rng_core soundcore floppy i2c_i801 thermal_sys parport_pc parport serio_raw usb_common ac button evdev i2c_core pcspkr microcode
> [ 7.056612] CPU: 0 PID: 199 Comm: modprobe Not tainted 3.11.0-rc7 #4
> [ 7.056615] Hardware name: IBM 26724XG/26724XG, BIOS 1KET48WW (1.09 ) 06/16/2006
> [ 7.056627] c130dc47 c102db05 e04b8528 def058b8 000000c7 e04b73e8 00000432 e0478580
> [ 7.056635] e0478580 dc480000 00000041 00000000 00000000 c102db53 00000009 def058a0
> [ 7.056644] e04b8528 def058b8 e0478580 e04b73e8 00000432 e04b8528 00000041 e04bdefb
> [ 7.056646] Call Trace:
> [ 7.056663] [<c130dc47>] ? dump_stack+0xa/0x13
> [ 7.056676] [<c102db05>] ? warn_slowpath_common+0x75/0x90
> [ 7.056732] [<e0478580>] ? assert_pipe+0x80/0xe0 [i915]
> [ 7.056785] [<e0478580>] ? assert_pipe+0x80/0xe0 [i915]
> [ 7.056793] [<c102db53>] ? warn_slowpath_fmt+0x33/0x40
> [ 7.056846] [<e0478580>] ? assert_pipe+0x80/0xe0 [i915]
> [ 7.056901] [<e04788ce>] ? intel_enable_pll+0xe/0xc0 [i915]
> [ 7.056954] [<e0478dde>] ? i9xx_crtc_enable+0x5e/0x220 [i915]
> [ 7.057010] [<e047eb2c>] ? __intel_set_mode+0x65c/0x11d0 [i915]
> [ 7.057069] [<e04814bd>] ? intel_set_mode+0x1d/0x40 [i915]
> [ 7.057125] [<e0481cc8>] ? intel_crtc_set_config+0x6f8/0x8e0 [i915]
> [ 7.057155] [<e0150de3>] ? drm_mode_set_config_internal+0x43/0xb0 [drm]
> [ 7.057167] [<e0364225>] ? drm_fb_helper_set_par+0x45/0xb0 [drm_kms_helper]
> [ 7.057178] [<c11a6822>] ? fbcon_init+0x482/0x4d0
> [ 7.057188] [<c11e2fae>] ? set_inverse_trans_unicode.isra.4+0xfe/0x120
> [ 7.057196] [<c11e42d6>] ? visual_init+0x96/0xf0
> [ 7.057203] [<c11e6444>] ? do_bind_con_driver+0x104/0x2d0
> [ 7.057211] [<c1101f96>] ? sysfs_add_file_mode+0x76/0xa0
> [ 7.057219] [<c11e6ae6>] ? do_take_over_console+0xf6/0x190
> [ 7.057225] [<c11a2437>] ? do_fbcon_takeover+0x57/0xc0
> [ 7.057234] [<c1047156>] ? notifier_call_chain+0x46/0x60
> [ 7.057240] [<c1047387>] ? __blocking_notifier_call_chain+0x37/0x50
> [ 7.057247] [<c10473b7>] ? blocking_notifier_call_chain+0x17/0x20
> [ 7.057259] [<c119aa00>] ? register_framebuffer+0x1b0/0x2d0
> [ 7.057269] [<e0363f35>] ? drm_fb_helper_initial_config+0x2e5/0x490 [drm_kms_helper]
> [ 7.057287] [<e014fb33>] ? drm_mode_config_reset+0x93/0xb0 [drm]
> [ 7.057297] [<c10af8d3>] ? __kmalloc+0xb3/0xe0
> [ 7.057306] [<e03632f8>] ? drm_fb_helper_single_add_all_connectors+0x58/0xa0 [drm_kms_helper]
> [ 7.057354] [<e045e667>] ? i915_driver_load+0xdc7/0xe00 [i915]
> [ 7.057400] [<e045b6d0>] ? i915_emit_breadcrumb+0xe0/0xe0 [i915]
> [ 7.057423] [<e014d529>] ? drm_get_pci_dev+0x129/0x230 [drm]
> [ 7.057434] [<c118c2a3>] ? pci_device_probe+0x63/0xb0
> [ 7.057442] [<c1200220>] ? __device_attach+0x30/0x30
> [ 7.057447] [<c1200073>] ? driver_probe_device+0x53/0x1d0
> [ 7.057456] [<c11721ea>] ? kobject_add_internal+0x7a/0x2a0
> [ 7.057461] [<c1200291>] ? __driver_attach+0x71/0x80
> [ 7.057474] [<c11fe91f>] ? bus_for_each_dev+0x3f/0x70
> [ 7.057480] [<c11ffc76>] ? driver_attach+0x16/0x20
> [ 7.057485] [<c1200220>] ? __device_attach+0x30/0x30
> [ 7.057490] [<c11ff94f>] ? bus_add_driver+0x18f/0x230
> [ 7.057497] [<c118b370>] ? pci_device_shutdown+0x50/0x50
> [ 7.057503] [<c1200773>] ? driver_register+0x63/0x120
> [ 7.057513] [<e04cd000>] ? 0xe04ccfff
> [ 7.057520] [<c1000402>] ? do_one_initcall+0xe2/0x130
> [ 7.057529] [<c10a56e0>] ? __vunmap+0x80/0xe0
> [ 7.057536] [<c10af3fe>] ? kfree+0x8e/0xc0
> [ 7.057541] [<c10a56c7>] ? __vunmap+0x67/0xe0
> [ 7.057547] [<c10a56c7>] ? __vunmap+0x67/0xe0
> [ 7.057553] [<c10af3fe>] ? kfree+0x8e/0xc0
> [ 7.057563] [<c1067ddb>] ? load_module+0x151b/0x1cd0
> [ 7.057573] [<c10685fb>] ? SyS_init_module+0x6b/0xa0
> [ 7.057585] [<c13110c1>] ? sysenter_do_call+0x12/0x22
> [ 7.057589] ---[ end trace eb2d805753ac7bfc ]---
> [ 7.121008] Console: switching to colour frame buffer device 128x48
> [ 7.444185] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 7.449459] i915 0000:00:02.0: registered panic notifier
> [ 7.463258] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> [ 7.493033] modprobe (199) used greatest stack depth: 5288 bytes left
> [ 8.791178] Adding 1028092k swap on /dev/sda5. Priority:-1 extents:1 across:1028092k
> [ 8.839671] EXT4-fs (sda1): re-mounted. Opts: (null)
> [ 9.157098] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
> [ 9.559484] fuse init (API version 7.22)
> [ 9.635294] loop: module loaded
> [ 13.389812] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 15.529988] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
> [ 17.139984] Bluetooth: Core ver 2.16
> [ 17.149446] NET: Registered protocol family 31
> [ 17.155706] Bluetooth: HCI device and connection manager initialized
> [ 17.162938] Bluetooth: HCI socket layer initialized
> [ 17.169879] Bluetooth: L2CAP socket layer initialized
> [ 17.176189] Bluetooth: SCO socket layer initialized
> [ 17.250563] Bluetooth: RFCOMM TTY layer initialized
> [ 17.256795] Bluetooth: RFCOMM socket layer initialized
> [ 17.262697] Bluetooth: RFCOMM ver 1.11
> [ 17.325204] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 17.330933] Bluetooth: BNEP filters: protocol multicast
> [ 17.338496] Bluetooth: BNEP socket layer initialized
>
> 00:00.0 Host bridge [0600]: Intel Corporation 82830M/MG/MP Host Bridge [8086:3575] (rev 04)
> Subsystem: IBM ThinkPad A/T/X Series [1014:021d]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Region 0: Memory at <unassigned> (32-bit, prefetchable)
> Capabilities: <access denied>
> Kernel driver in use: agpgart-intel
>
> 00:02.0 VGA compatible controller [0300]: Intel Corporation 82830M/MG Integrated Graphics Controller [8086:3577] (rev 04) (prog-if 00 [VGA controller])
> Subsystem: IBM ThinkPad A/T/X Series [1014:0513]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
> Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: <access denied>
> Kernel driver in use: i915
>
> 00:02.1 Display controller [0380]: Intel Corporation 82830M/MG Integrated Graphics Controller [8086:3577]
> Subsystem: IBM ThinkPad A/T/X Series [1014:0513]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
> Region 1: Memory at d0080000 (32-bit, non-prefetchable) [size=512K]
> Capabilities: <access denied>
>
> 00:1d.0 USB controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #1 [8086:2482] (rev 02) (prog-if 00 [UHCI])
> Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 11
> Region 4: I/O ports at 1800 [size=32]
> Kernel driver in use: uhci_hcd
>
> 00:1d.1 USB controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #2 [8086:2484] (rev 02) (prog-if 00 [UHCI])
> Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 11
> Region 4: I/O ports at 1820 [size=32]
> Kernel driver in use: uhci_hcd
>
> 00:1d.2 USB controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #3 [8086:2487] (rev 02) (prog-if 00 [UHCI])
> Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 11
> Region 4: I/O ports at 1840 [size=32]
> Kernel driver in use: uhci_hcd
>
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 42) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=07, sec-latency=64
> I/O behind bridge: 00003000-00007fff
> Memory behind bridge: d0200000-dfffffff
> Prefetchable memory behind bridge: f0000000-f7ffffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801CAM ISA Bridge (LPC) [8086:248c] (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:1f.1 IDE interface [0101]: Intel Corporation 82801CAM IDE U100 Controller [8086:248a] (rev 02) (prog-if 8a [Master SecP PriP])
> Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374
> Region 4: I/O ports at 1860 [size=16]
> Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
> Kernel driver in use: ata_piix
>
> 00:1f.3 SMBus [0c05]: Intel Corporation 82801CA/CAM SMBus Controller [8086:2483] (rev 02)
> Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 5
> Region 4: I/O ports at 1880 [size=32]
> Kernel driver in use: i801_smbus
>
> 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801CA/CAM AC'97 Audio Controller [8086:2485] (rev 02)
> Subsystem: IBM ThinkPad A/T/X Series [1014:051c]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 5
> Region 0: I/O ports at 1c00 [size=256]
> Region 1: I/O ports at 18c0 [size=64]
> Kernel driver in use: snd_intel8x0
>
> 00:1f.6 Modem [0703]: Intel Corporation 82801CA/CAM AC'97 Modem Controller [8086:2486] (rev 02) (prog-if 00 [Generic])
> Subsystem: IBM ThinkPad A/T/X Series [1014:0223]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 5
> Region 0: I/O ports at 2400 [size=256]
> Region 1: I/O ports at 2000 [size=128]
> Kernel driver in use: snd_intel8x0m
>
> 01:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev a8)
> Subsystem: IBM ThinkPad A/T/X Series [1014:0185]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 168
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
> Memory window 0: f0000000-f3ffffff (prefetchable)
> Memory window 1: d4000000-d7ffffff
> I/O window 0: 00003000-000030ff
> I/O window 1: 00003400-000034ff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
> 16-bit legacy interface ports at 0001
> Kernel driver in use: yenta_cardbus
>
> 01:00.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev a8)
> Subsystem: IBM ThinkPad A/T/X Series [1014:0185]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 168
> Interrupt: pin B routed to IRQ 5
> Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=01, secondary=06, subordinate=06, sec-latency=176
> Memory window 0: f4000000-f7ffffff (prefetchable)
> Memory window 1: d8000000-dbffffff
> I/O window 0: 00003800-000038ff
> I/O window 1: 00003c00-00003cff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
> 16-bit legacy interface ports at 0001
> Kernel driver in use: yenta_cardbus
>
> 01:00.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (prog-if 10 [OHCI])
> Subsystem: IBM ThinkPad A/T/X Series [1014:0511]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (500ns min, 1000ns max)
> Interrupt: pin C routed to IRQ 11
> Region 0: Memory at d0205000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: <access denied>
> Kernel driver in use: firewire_ohci
>
> 01:02.0 Network controller [0280]: Cisco Aironet Wireless Communications Cisco Aironet Wireless 802.11b [14b9:a504]
> Subsystem: Cisco Aironet Wireless Communications Device [14b9:5000]
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at 7000 [size=256]
> Region 1: Memory at d0200000 (32-bit, non-prefetchable) [size=16K]
> Region 2: Memory at d0400000 (32-bit, non-prefetchable) [size=4M]
> [virtual] Expansion ROM at d0800000 [disabled] [size=2M]
> Capabilities: <access denied>
> Kernel driver in use: airo
>
> 01:08.0 Ethernet controller [0200]: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller [8086:1031] (rev 42)
> Subsystem: IBM ThinkPad A/T/X Series [1014:0209]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at d0204000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at 7400 [size=64]
> Capabilities: <access denied>
> Kernel driver in use: e100
>
>
>
>
--
Meelis Roos (mroos@linux.ee)
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: i915 pipe A assertion failure (expected on, current off)
2013-09-21 15:29 ` Meelis Roos
@ 2013-09-21 15:48 ` Daniel Vetter
2013-09-21 16:03 ` Ville Syrjälä
2013-09-22 6:02 ` Meelis Roos
[not found] ` <4319_1379778790_523DC0E3_4319_13540_1_CAKMK7uHynzChMurTLAYMfeRF07aDJxes-6eSO1iDbrET8xD84Q@mail.gmail.com>
1 sibling, 2 replies; 13+ messages in thread
From: Daniel Vetter @ 2013-09-21 15:48 UTC (permalink / raw)
To: Meelis Roos
Cc: dri-devel, Linux Kernel list, Chris Wilson,
Ville Syrjälä,
intel-gfx
On Sat, Sep 21, 2013 at 5:29 PM, Meelis Roos <mroos@linux.ee> wrote:
>> Tried 3.11-rc7 on Thinkpad X30 (first 3-11-rc tried on this hw). Works
>> but i915 gives strange assertion failure with WARNING stack trace. This
>> is new since 3.10.
>
> It is still there with 3.12-rc1 but now I git around to bisecting it.
> This is the commit that introduces the warning.
>
> commit 9f11a9e4e50006b615ba94722dfc33ced89664cf
> Author: Daniel Vetter <daniel.vetter@ffwll.ch>
> Date: Thu Jun 13 00:54:58 2013 +0200
>
> drm/i915: set up PIPECONF explicitly for i9xx/vlv platforms
My apologies for not responding to your first report, fell through the
cracks somehow. Can you please boot with drm.debug=0xe, reproduce the
WARN and grab the full dmesg (please make sure everything from boot-up
is in there). That's usually enough to figure out what's going wrong
here.
Thanks, Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: i915 pipe A assertion failure (expected on, current off)
2013-09-21 15:48 ` Daniel Vetter
@ 2013-09-21 16:03 ` Ville Syrjälä
2013-09-22 6:02 ` Meelis Roos
1 sibling, 0 replies; 13+ messages in thread
From: Ville Syrjälä @ 2013-09-21 16:03 UTC (permalink / raw)
To: Daniel Vetter; +Cc: Meelis Roos, intel-gfx, Linux Kernel list, dri-devel
On Sat, Sep 21, 2013 at 05:48:42PM +0200, Daniel Vetter wrote:
> On Sat, Sep 21, 2013 at 5:29 PM, Meelis Roos <mroos@linux.ee> wrote:
> >> Tried 3.11-rc7 on Thinkpad X30 (first 3-11-rc tried on this hw). Works
> >> but i915 gives strange assertion failure with WARNING stack trace. This
> >> is new since 3.10.
> >
> > It is still there with 3.12-rc1 but now I git around to bisecting it.
> > This is the commit that introduces the warning.
> >
> > commit 9f11a9e4e50006b615ba94722dfc33ced89664cf
> > Author: Daniel Vetter <daniel.vetter@ffwll.ch>
> > Date: Thu Jun 13 00:54:58 2013 +0200
> >
> > drm/i915: set up PIPECONF explicitly for i9xx/vlv platforms
>
> My apologies for not responding to your first report, fell through the
> cracks somehow. Can you please boot with drm.debug=0xe, reproduce the
> WARN and grab the full dmesg (please make sure everything from boot-up
> is in there). That's usually enough to figure out what's going wrong
> here.
I'd say it's a simple matter of forgetting about QUIRK_PIPEA_FORCE in
i9xx_set_pipeconf().
--
Ville Syrjälä
syrjala@sci.fi
http://www.sci.fi/~syrjala/
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: i915 pipe A assertion failure (expected on, current off)
2013-09-21 15:48 ` Daniel Vetter
2013-09-21 16:03 ` Ville Syrjälä
@ 2013-09-22 6:02 ` Meelis Roos
1 sibling, 0 replies; 13+ messages in thread
From: Meelis Roos @ 2013-09-22 6:02 UTC (permalink / raw)
To: Daniel Vetter
Cc: dri-devel, Linux Kernel list, Chris Wilson,
Ville Syrjälä,
intel-gfx
> >> Tried 3.11-rc7 on Thinkpad X30 (first 3-11-rc tried on this hw). Works
> >> but i915 gives strange assertion failure with WARNING stack trace. This
> >> is new since 3.10.
> >
> > It is still there with 3.12-rc1 but now I git around to bisecting it.
> > This is the commit that introduces the warning.
> >
> > commit 9f11a9e4e50006b615ba94722dfc33ced89664cf
> > Author: Daniel Vetter <daniel.vetter@ffwll.ch>
> > Date: Thu Jun 13 00:54:58 2013 +0200
> >
> > drm/i915: set up PIPECONF explicitly for i9xx/vlv platforms
>
> My apologies for not responding to your first report, fell through the
> cracks somehow. Can you please boot with drm.debug=0xe, reproduce the
> WARN and grab the full dmesg (please make sure everything from boot-up
> is in there). That's usually enough to figure out what's going wrong
> here.
[ 0.000000] Linux version 3.12.0-rc1-00273-g2457aaf (mroos@x30) (gcc version 4.8.1 (Debian 4.8.1-10) ) #31 Sat Sep 21 20:40:43 EEST 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f76ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f770000-0x000000001f77dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001f77e000-0x000000001f77ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000001f780000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: IBM 26724XG/26724XG, BIOS 1KET48WW (1.09 ) 06/16/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1f770 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01FF80000 mask FFFF80000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 512MB, type WB
[ 0.000000] reg 1, base: 523776KB, range: 512KB, type UC
[ 0.000000] total RAM covered: 511M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 2 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 512MB, type WB
[ 0.000000] reg 1, base: 523776KB, range: 512KB, type UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x017fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1f3fffff]
[ 0.000000] [mem 0x1f000000-0x1f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x18000000-0x1effffff]
[ 0.000000] [mem 0x18000000-0x1effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x17ffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x17ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1f76ffff]
[ 0.000000] [mem 0x1f400000-0x1f76ffff] page 4k
[ 0.000000] BRK [0x014ed000, 0x014edfff] PGTABLE
[ 0.000000] ACPI: RSDP 000f7090 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 1f772a76 0004C (v01 IBM TP-1K 00001090 LTP 00000000)
[ 0.000000] ACPI: FACP 1f772b00 00081 (v01 IBM TP-1K 00001090 IBM 00000001)
[ 0.000000] ACPI: DSDT 1f772be7 0B22C (v01 IBM TP-1K 00001090 MSFT 0100000D)
[ 0.000000] ACPI: FACS 1f77f000 00040
[ 0.000000] ACPI: SSDT 1f772bb4 00033 (v01 IBM TP-1K 00001090 MSFT 0100000D)
[ 0.000000] ACPI: ECDT 1f77de13 00052 (v01 IBM TP-1K 00001090 IBM 00000001)
[ 0.000000] ACPI: TCPA 1f77de65 00032 (v01 IBM TP-1K 00001090 PTL 00000001)
[ 0.000000] ACPI: BOOT 1f77dfd8 00028 (v01 IBM TP-1K 00001090 LTP 00000001)
[ 0.000000] 503MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1f770000
[ 0.000000] low ram: 0 - 1f770000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x1f76ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1f76ffff]
[ 0.000000] On node 0 totalpages: 128782
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 975 pages used for memmap
[ 0.000000] Normal zone: 124784 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Local APIC disabled by BIOS -- reenabling.
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xff7fffff] available for PCI devices
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127775
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-rc1-00273-g2457aaf root=/dev/sda1 ro lapic drm.debug=0xe
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 505452K/515128K available (3197K kernel code, 234K rwdata, 932K rodata, 320K init, 324K bss, 9676K reserved)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[ 0.000000] vmalloc : 0xdff70000 - 0xfffa0000 ( 512 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf770000 ( 503 MB)
[ 0.000000] .init : 0xc1445000 - 0xc1495000 ( 320 kB)
[ 0.000000] .data : 0xc131fa39 - 0xc1444940 (1171 kB)
[ 0.000000] .text : 0xc1000000 - 0xc131fa39 (3198 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=dec06000 soft=dec08000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1196.056 MHz processor
[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2392.11 BogoMIPS (lpj=4784224)
[ 0.008147] pid_max: default: 32768 minimum: 301
[ 0.008317] Mount-cache hash table entries: 512
[ 0.012351] mce: CPU supports 5 MCE banks
[ 0.012476] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.012476] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
[ 0.012476] tlb_flushall_shift: 6
[ 0.012645] CPU: Mobile Intel(R) Pentium(R) III CPU - M 1200MHz (fam: 06, model: 0b, stepping: 04)
[ 0.012862] ACPI: Core revision 20130725
[ 0.022555] ACPI: All ACPI Tables successfully acquired
[ 0.022952] ACPI: setting ELCR to 0200 (from 0820)
[ 0.028028] Performance Events: p6 PMU driver.
[ 0.028396] ... version: 0
[ 0.028708] ... bit width: 32
[ 0.029018] ... generic registers: 2
[ 0.029329] ... value mask: 00000000ffffffff
[ 0.029659] ... max period: 000000007fffffff
[ 0.029970] ... fixed-purpose events: 0
[ 0.030280] ... event mask: 0000000000000003
[ 0.030907] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.032000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.032000] devtmpfs: initialized
[ 0.032000] PM: Registering ACPI NVS region [mem 0x1f77e000-0x1f77ffff] (8192 bytes)
[ 0.032000] NET: Registered protocol family 16
[ 0.032000] cpuidle: using governor ladder
[ 0.032000] cpuidle: using governor menu
[ 0.032000] ACPI: bus type PCI registered
[ 0.032000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.032000] PCI: PCI BIOS revision 2.10 entry at 0xfd90e, last bus=7
[ 0.032000] PCI: Using configuration type 1 for base access
[ 0.032000] bio: create slab <bio-0> at 0
[ 0.032000] ACPI: Added _OSI(Module Device)
[ 0.032000] ACPI: Added _OSI(Processor Device)
[ 0.032000] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.032000] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.033683] ACPI: EC: EC description table is found, configuring boot EC
[ 0.044787] ACPI: Interpreter enabled
[ 0.044787] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.044845] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.045023] ACPI: (supports S0 S3 S4 S5)
[ 0.045092] ACPI: Using PIC for interrupt routing
[ 0.048042] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.049114] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.056697] ACPI: Power Resource [PUBS] (on)
[ 0.064240] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.064741] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
[ 0.065235] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.065730] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.066224] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.066657] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.067678] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.068464] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.069386] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.069747] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.070359] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.071041] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.071048] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.071055] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.071062] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.071068] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.071074] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.071081] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[ 0.071086] PCI: root bus 00: using default resources
[ 0.071094] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.072186] PCI host bridge to bus 0000:00
[ 0.072505] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.072833] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.073182] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.073550] pci 0000:00:00.0: [8086:3575] type 00 class 0x060000
[ 0.073694] pci 0000:00:02.0: [8086:3577] type 00 class 0x030000
[ 0.073710] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.073721] pci 0000:00:02.0: reg 0x14: [mem 0xd0000000-0xd007ffff]
[ 0.073754] pci 0000:00:02.0: supports D1
[ 0.073860] pci 0000:00:02.1: [8086:3577] type 00 class 0x038000
[ 0.073873] pci 0000:00:02.1: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[ 0.073883] pci 0000:00:02.1: reg 0x14: [mem 0xd0080000-0xd00fffff]
[ 0.073916] pci 0000:00:02.1: supports D1
[ 0.074041] pci 0000:00:1d.0: [8086:2482] type 00 class 0x0c0300
[ 0.074082] pci 0000:00:1d.0: reg 0x20: [io 0x1800-0x181f]
[ 0.074269] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.074269] pci 0000:00:1d.1: [8086:2484] type 00 class 0x0c0300
[ 0.074269] pci 0000:00:1d.1: reg 0x20: [io 0x1820-0x183f]
[ 0.074269] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.074269] pci 0000:00:1d.2: [8086:2487] type 00 class 0x0c0300
[ 0.074269] pci 0000:00:1d.2: reg 0x20: [io 0x1840-0x185f]
[ 0.074269] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.074269] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400
[ 0.074269] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.074269] pci 0000:00:1f.0: [8086:248c] type 00 class 0x060100
[ 0.074269] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[ 0.074269] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO
[ 0.076105] pci 0000:00:1f.1: [8086:248a] type 00 class 0x01018a
[ 0.076123] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.076136] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.076148] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
[ 0.076161] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.076173] pci 0000:00:1f.1: reg 0x20: [io 0x1860-0x186f]
[ 0.076186] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
[ 0.076307] pci 0000:00:1f.3: [8086:2483] type 00 class 0x0c0500
[ 0.076348] pci 0000:00:1f.3: reg 0x20: [io 0x1880-0x189f]
[ 0.076466] pci 0000:00:1f.5: [8086:2485] type 00 class 0x040100
[ 0.076483] pci 0000:00:1f.5: reg 0x10: [io 0x1c00-0x1cff]
[ 0.076496] pci 0000:00:1f.5: reg 0x14: [io 0x18c0-0x18ff]
[ 0.076639] pci 0000:00:1f.6: [8086:2486] type 00 class 0x070300
[ 0.076656] pci 0000:00:1f.6: reg 0x10: [io 0x2400-0x24ff]
[ 0.076669] pci 0000:00:1f.6: reg 0x14: [io 0x2000-0x207f]
[ 0.076768] pci 0000:00:1f.6: System wakeup disabled by ACPI
[ 0.077021] acpiphp: Slot [1] registered
[ 0.077110] pci 0000:01:00.0: [1180:0476] type 02 class 0x060700
[ 0.077128] pci 0000:01:00.0: reg 0x10: [mem 0x50000000-0x50000fff]
[ 0.077154] pci 0000:01:00.0: supports D1 D2
[ 0.077160] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.077278] pci 0000:01:00.1: [1180:0476] type 02 class 0x060700
[ 0.077297] pci 0000:01:00.1: reg 0x10: [mem 0x50100000-0x50100fff]
[ 0.077323] pci 0000:01:00.1: supports D1 D2
[ 0.077329] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.077425] pci 0000:01:00.2: [1180:0552] type 00 class 0x0c0010
[ 0.077443] pci 0000:01:00.2: reg 0x10: [mem 0xd0205000-0xd02057ff]
[ 0.077502] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
[ 0.077605] pci 0000:01:02.0: [14b9:a504] type 00 class 0x028000
[ 0.077625] pci 0000:01:02.0: reg 0x10: [io 0x7000-0x70ff]
[ 0.077637] pci 0000:01:02.0: reg 0x14: [mem 0xd0200000-0xd0203fff]
[ 0.077649] pci 0000:01:02.0: reg 0x18: [mem 0xd0400000-0xd07fffff]
[ 0.077677] pci 0000:01:02.0: reg 0x30: [mem 0x00000000-0x001fffff pref]
[ 0.077708] pci 0000:01:02.0: supports D1 D2
[ 0.077798] pci 0000:01:08.0: [8086:1031] type 00 class 0x020000
[ 0.077816] pci 0000:01:08.0: reg 0x10: [mem 0xd0204000-0xd0204fff]
[ 0.077828] pci 0000:01:08.0: reg 0x14: [io 0x7400-0x743f]
[ 0.077879] pci 0000:01:08.0: supports D1 D2
[ 0.077885] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.077987] pci 0000:00:1e.0: PCI bridge to [bus 01-07] (subtractive decode)
[ 0.078066] pci 0000:00:1e.0: bridge window [io 0x3000-0x7fff]
[ 0.078075] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xdfffffff]
[ 0.078083] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
[ 0.078089] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.078095] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.078166] pci_bus 0000:02: busn_res: can not insert [bus 02-ff] under [bus 01-07] (conflicts with (null) [bus 01-07])
[ 0.078176] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
[ 0.078237] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 01-07] (conflicts with (null) [bus 01-07])
[ 0.078246] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
[ 0.078261] pci_bus 0000:00: on NUMA node 0
[ 0.080137] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.080208] Found 1 acpi root devices
[ 0.080346] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.080580] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.080702] vgaarb: loaded
[ 0.080768] vgaarb: bridge control possible 0000:00:02.0
[ 0.081016] SCSI subsystem initialized
[ 0.081193] libata version 3.00 loaded.
[ 0.081262] PCI: Using ACPI for IRQ routing
[ 0.081433] PCI: pci_cache_line_size set to 32 bytes
[ 0.081482] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.081488] e820: reserve RAM buffer [mem 0x1f770000-0x1fffffff]
[ 0.081766] Switched to clocksource refined-jiffies
[ 0.081902] pnp: PnP ACPI init
[ 0.081988] ACPI: bus type PNP registered
[ 0.083130] pnp 00:00: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.083735] pnp 00:00: disabling [mem 0x000c0000-0x000c3fff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.084014] pnp 00:00: disabling [mem 0x000c4000-0x000c7fff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.084677] pnp 00:00: disabling [mem 0x000c8000-0x000cbfff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.085338] pnp 00:00: disabling [mem 0x000cc000-0x000cffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.086000] pnp 00:00: disabling [mem 0x000d0000-0x000cffff disabled] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.086671] pnp 00:00: disabling [mem 0x000d4000-0x000d3fff disabled] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.087332] pnp 00:00: disabling [mem 0x000d8000-0x000d7fff disabled] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.088008] pnp 00:00: disabling [mem 0x000dc000-0x000dffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.088665] pnp 00:00: disabling [mem 0x000e0000-0x000e3fff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.089326] pnp 00:00: disabling [mem 0x000e4000-0x000e7fff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.092008] pnp 00:00: disabling [mem 0x000e8000-0x000ebfff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.092135] pnp 00:00: disabling [mem 0x000ec000-0x000effff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.092262] pnp 00:00: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.092389] pnp 00:00: disabling [mem 0x00100000-0x1fffffff] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x001fffff pref]
[ 0.092577] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.092657] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.092813] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.092890] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.092964] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.093039] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.093114] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.093148] pnp 00:02: [dma 4]
[ 0.093193] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.093258] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.093328] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.093401] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.093463] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.093530] pnp 00:07: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.093592] pnp 00:08: [dma 2]
[ 0.093661] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.093956] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.094251] pnp 00:0a: [dma 0]
[ 0.094407] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.094597] pnp 00:0b: [dma 3]
[ 0.094753] pnp 00:0b: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active)
[ 0.096054] pnp: PnP ACPI: found 12 devices
[ 0.096124] ACPI: bus type PNP unregistered
[ 0.134080] Switched to clocksource acpi_pm
[ 0.134458] pci 0000:00:1f.0: BAR 7: [io 0x1000-0x107f] has bogus alignment
[ 0.134828] pci 0000:00:1f.1: BAR 5: assigned [mem 0x20000000-0x200003ff]
[ 0.135182] pci 0000:01:00.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.135189] pci 0000:01:00.0: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.135196] pci 0000:01:00.1: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.135203] pci 0000:01:00.1: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.135210] pci 0000:01:00.0: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.135216] pci 0000:01:00.0: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.135222] pci 0000:01:00.1: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.135229] pci 0000:01:00.1: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.135236] pci 0000:01:00.0: BAR 9: assigned [mem 0xf0000000-0xf3ffffff pref]
[ 0.135837] pci 0000:01:00.0: BAR 10: assigned [mem 0xd4000000-0xd7ffffff]
[ 0.135837] pci 0000:01:00.1: BAR 9: assigned [mem 0xf4000000-0xf7ffffff pref]
[ 0.135837] pci 0000:01:00.1: BAR 10: assigned [mem 0xd8000000-0xdbffffff]
[ 0.135837] pci 0000:01:02.0: BAR 6: assigned [mem 0xd0800000-0xd09fffff pref]
[ 0.135837] pci 0000:01:00.0: BAR 7: assigned [io 0x3000-0x30ff]
[ 0.136039] pci 0000:01:00.0: BAR 8: assigned [io 0x3400-0x34ff]
[ 0.136378] pci 0000:01:00.1: BAR 7: assigned [io 0x3800-0x38ff]
[ 0.136730] pci 0000:01:00.1: BAR 8: assigned [io 0x3c00-0x3cff]
[ 0.137084] pci 0000:01:00.0: CardBus bridge to [bus 02-05]
[ 0.137415] pci 0000:01:00.0: bridge window [io 0x3000-0x30ff]
[ 0.137764] pci 0000:01:00.0: bridge window [io 0x3400-0x34ff]
[ 0.138116] pci 0000:01:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
[ 0.138727] pci 0000:01:00.0: bridge window [mem 0xd4000000-0xd7ffffff]
[ 0.139068] pci 0000:01:00.1: CardBus bridge to [bus 06]
[ 0.139355] pci 0000:01:00.1: bridge window [io 0x3800-0x38ff]
[ 0.139430] pci 0000:01:00.1: bridge window [io 0x3c00-0x3cff]
[ 0.139506] pci 0000:01:00.1: bridge window [mem 0xf4000000-0xf7ffffff pref]
[ 0.139624] pci 0000:01:00.1: bridge window [mem 0xd8000000-0xdbffffff]
[ 0.139701] pci 0000:00:1e.0: PCI bridge to [bus 01-07]
[ 0.139775] pci 0000:00:1e.0: bridge window [io 0x3000-0x7fff]
[ 0.139852] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xdfffffff]
[ 0.139929] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
[ 0.140060] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.140067] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.140073] pci_bus 0000:01: resource 0 [io 0x3000-0x7fff]
[ 0.140079] pci_bus 0000:01: resource 1 [mem 0xd0200000-0xdfffffff]
[ 0.140085] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
[ 0.140091] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.140097] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
[ 0.140103] pci_bus 0000:02: resource 0 [io 0x3000-0x30ff]
[ 0.140109] pci_bus 0000:02: resource 1 [io 0x3400-0x34ff]
[ 0.140115] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[ 0.140121] pci_bus 0000:02: resource 3 [mem 0xd4000000-0xd7ffffff]
[ 0.140127] pci_bus 0000:06: resource 0 [io 0x3800-0x38ff]
[ 0.140133] pci_bus 0000:06: resource 1 [io 0x3c00-0x3cff]
[ 0.140139] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf7ffffff pref]
[ 0.140145] pci_bus 0000:06: resource 3 [mem 0xd8000000-0xdbffffff]
[ 0.140233] NET: Registered protocol family 2
[ 0.140689] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.140838] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.140950] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.141080] TCP: reno registered
[ 0.141153] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.141235] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.141446] NET: Registered protocol family 1
[ 0.141553] pci 0000:00:02.0: Boot video device
[ 0.142014] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.142090] PCI: setting IRQ 11 as level-triggered
[ 0.142468] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.142898] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.143066] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.143196] PCI: CLS 32 bytes, default 32
[ 0.143294] Simple Boot Flag at 0x35 set to 0x1
[ 0.143877] audit: initializing netlink socket (disabled)
[ 0.143974] type=2000 audit(1379829550.140:1): initialized
[ 0.144530] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.148151] msgmni has been set to 987
[ 0.148732] cryptomgr_test (19) used greatest stack depth: 7688 bytes left
[ 0.149244] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.149856] io scheduler noop registered
[ 0.150279] io scheduler cfq registered (default)
[ 0.150675] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.151219] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.151861] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 921600) is a NS16550A
[ 0.152811] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A
[ 0.154258] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 0.154603] PCI: setting IRQ 5 as level-triggered
[ 0.154940] Non-volatile memory driver v1.3
[ 0.155271] Linux agpgart interface v0.103
[ 0.155613] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 0.155969] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[ 0.156852] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.157267] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 0.157477] ata_piix 0000:00:1f.1: version 2.13
[ 0.157495] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.157698] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.158848] scsi0 : ata_piix
[ 0.159041] scsi1 : ata_piix
[ 0.159178] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[ 0.159253] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[ 0.159467] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.165151] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.165474] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.166154] mousedev: PS/2 mouse device common for all mice
[ 0.166567] rtc_cmos 00:05: RTC can wake from S4
[ 0.167092] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.167463] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram
[ 0.168065] TCP: cubic registered
[ 0.168642] NET: Registered protocol family 10
[ 0.169438] NET: Registered protocol family 17
[ 0.170024] Using IPI Shortcut mode
[ 0.170451] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.171445] PM: Hibernation image not present or could not be loaded.
[ 0.171472] registered taskstats version 1
[ 0.172301] rtc_cmos 00:05: setting system clock to 2013-09-22 05:59:10 UTC (1379829550)
[ 0.328475] ata1.00: ATA-7: ST96023A, 3.06, max UDMA/100
[ 0.328549] ata1.00: 117210240 sectors, multi 16: LBA48
[ 0.344335] ata1.00: configured for UDMA/100
[ 0.344628] scsi 0:0:0:0: Direct-Access ATA ST96023A 3.06 PQ: 0 ANSI: 5
[ 0.345100] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 0.345320] sd 0:0:0:0: [sda] Write Protect is off
[ 0.345394] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.345442] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.392456] sda: sda1 sda2 < sda5 >
[ 0.393021] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.416192] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 0.417041] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[ 0.445035] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 0.445176] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 0.480291] devtmpfs: mounted
[ 0.480733] Freeing unused kernel memory: 320K (c1445000 - c1495000)
[ 0.480953] Write protecting the kernel text: 3200k
[ 0.481161] Write protecting the kernel read-only data: 936k
[ 1.140030] tsc: Refined TSC clocksource calibration: 1196.015 MHz
[ 1.294630] stty (34) used greatest stack depth: 6536 bytes left
[ 2.140104] Switched to clocksource tsc
[ 2.312414] systemd-udevd[144]: starting version 204
[ 3.282560] intel_rng: FWH not detected
[ 3.374708] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.375160] modprobe (194) used greatest stack depth: 6496 bytes left
[ 3.392488] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 3.396045] ACPI: Lid Switch [LID]
[ 3.396352] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 3.396478] ACPI: Sleep Button [SLPB]
[ 3.396668] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.396787] ACPI: Power Button [PWRF]
[ 3.397208] modprobe (204) used greatest stack depth: 6368 bytes left
[ 3.412233] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 3.412436] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input4
[ 3.473722] Floppy drive(s): fd0 is 1.44M
[ 3.491029] FDC 0 is a National Semiconductor PC87306
[ 3.586061] ACPI: Requesting acpi_cpufreq
[ 3.586704] tsc: Marking TSC unstable due to TSC halts in idle
[ 3.587061] ACPI: acpi_idle registered with cpuidle
[ 3.593299] Switched to clocksource acpi_pm
[ 3.632987] modprobe (201) used greatest stack depth: 6344 bytes left
[ 3.689632] parport_pc 00:0a: reported by Plug and Play ACPI
[ 3.689763] parport0: PC-style at 0x3bc (0x7bc), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 3.705859] ACPI: AC Adapter [AC] (on-line)
[ 3.706512] modprobe (221) used greatest stack depth: 6052 bytes left
[ 3.916377] pci 0000:00:1e.0: setting latency timer to 64
[ 3.916518] yenta_cardbus 0000:01:00.0: CardBus bridge found [1014:0185]
[ 4.044498] yenta_cardbus 0000:01:00.0: ISA IRQ mask 0x0418, PCI irq 11
[ 4.044588] yenta_cardbus 0000:01:00.0: Socket status: 30000006
[ 4.044673] yenta_cardbus 0000:01:00.0: pcmcia: parent PCI bridge window: [io 0x3000-0x7fff]
[ 4.044794] yenta_cardbus 0000:01:00.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xdfffffff]
[ 4.044916] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xdfffffff:
[ 4.045037] excluding 0xd0200000-0xd09fffff 0xd3a00000-0xdc1fffff 0xdfa00000-0xe01fffff
[ 4.045252] yenta_cardbus 0000:01:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf7ffffff pref]
[ 4.046299] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf7ffffff:
[ 4.046427] excluding 0xf0000000-0xf7ffffff
[ 4.048862] yenta_cardbus 0000:01:00.1: CardBus bridge found [1014:0185]
[ 4.103726] ACPI: Battery Slot [BAT0] (battery absent)
[ 4.114522] [drm] Initialized drm 1.1.0 20060810
[ 4.120283] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.120628] ACPI: Thermal Zone [THM0] (39 C)
[ 4.176399] yenta_cardbus 0000:01:00.1: ISA IRQ mask 0x0418, PCI irq 5
[ 4.176493] yenta_cardbus 0000:01:00.1: Socket status: 30000006
[ 4.176583] yenta_cardbus 0000:01:00.1: pcmcia: parent PCI bridge window: [io 0x3000-0x7fff]
[ 4.176709] yenta_cardbus 0000:01:00.1: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xdfffffff]
[ 4.176837] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd0200000-0xdfffffff:
[ 4.176962] excluding 0xd0200000-0xd09fffff 0xd3a00000-0xdc1fffff 0xdfa00000-0xe01fffff
[ 4.177198] yenta_cardbus 0000:01:00.1: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf7ffffff pref]
[ 4.177338] pcmcia_socket pcmcia_socket1: cs: memory probe 0xf0000000-0xf7ffffff:
[ 4.177476] excluding 0xf0000000-0xf7ffffff
[ 4.248539] airo(): Probing for PCI adapters
[ 4.249145] airo(): Found an MPI350 card
[ 4.369081] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 4.369426] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.369755] thinkpad_acpi: ThinkPad BIOS 1KET48WW (1.09 ), EC 1KHT18WW-1.06
[ 4.376938] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 4.401576] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.410609] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 4.432665] ACPI: bus type USB registered
[ 4.433107] usbcore: registered new interface driver usbfs
[ 4.433497] usbcore: registered new interface driver hub
[ 4.436192] usbcore: registered new device driver usb
[ 4.678712] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 4.678804] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.889435] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[ 4.905780] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.976215] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.201428] airo(eth0): Firmware version 5.2.19
[ 5.201782] airo(eth0): WPA unsupported with firmware versions older than 5.30.17.
[ 5.202393] airo(eth0): MAC enabled 00:02:8a:25:27:a8
[ 5.203251] airo(): Finished probing for PCI adapters
[ 5.204042] modprobe (250) used greatest stack depth: 5660 bytes left
[ 5.272101] firewire_ohci 0000:01:00.2: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 5.273549] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 5.299621] snd_intel8x0m: `-2' invalid for parameter `index'
[ 5.352404] e100 0000:01:08.0 eth1: addr 0xd0204000, irq 11, MAC addr 00:09:6b:a0:c7:55
[ 5.393007] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 5.456060] intel8x0_measure_ac97_clock: measured 55351 usecs (2660 samples)
[ 5.456156] intel8x0: clocking to 48000
[ 5.457775] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.457791] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.457888] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 5.458057] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 5.458342] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.458426] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.458553] usb usb1: Product: UHCI Host Controller
[ 5.458641] usb usb1: Manufacturer: Linux 3.12.0-rc1-00273-g2457aaf uhci_hcd
[ 5.458724] usb usb1: SerialNumber: 0000:00:1d.0
[ 5.459174] hub 1-0:1.0: USB hub found
[ 5.459269] hub 1-0:1.0: 2 ports detected
[ 5.459729] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.459739] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.459829] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 5.460306] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 5.460520] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.460603] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.460724] usb usb2: Product: UHCI Host Controller
[ 5.460800] usb usb2: Manufacturer: Linux 3.12.0-rc1-00273-g2457aaf uhci_hcd
[ 5.460880] usb usb2: SerialNumber: 0000:00:1d.1
[ 5.462106] hub 2-0:1.0: USB hub found
[ 5.462204] hub 2-0:1.0: 2 ports detected
[ 5.468332] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.468346] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.468699] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 5.469359] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 5.469833] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.470177] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.470795] usb usb3: Product: UHCI Host Controller
[ 5.471127] usb usb3: Manufacturer: Linux 3.12.0-rc1-00273-g2457aaf uhci_hcd
[ 5.471452] usb usb3: SerialNumber: 0000:00:1d.2
[ 5.471843] hub 3-0:1.0: USB hub found
[ 5.471934] hub 3-0:1.0: 2 ports detected
[ 5.548431] microcode: CPU0 sig=0x6b4, pf=0x20, revision=0x2
[ 5.608302] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.796271] firewire_core 0000:01:00.2: created device fw0: GUID 00061b0201022780, S400
[ 6.208124] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
[ 6.208225] excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[ 6.208440] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[ 6.208584] clean.
[ 6.208699] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
[ 6.208841] clean.
[ 6.209331] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 6.209413] excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[ 6.209626] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 6.209769] clean.
[ 6.209882] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 6.210025] clean.
[ 6.221726] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 6.536657] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 6.554355] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[ 6.566122] systemd-udevd[187]: renamed network interface eth1 to rename4
[ 6.568442] systemd-udevd[198]: renamed network interface eth0 to eth1
[ 6.617019] systemd-udevd[187]: renamed network interface rename4 to eth0
[ 7.889616] [drm:i915_dump_device_info], i915 device info: gen=2, pciid=0x3577 flags=is_mobile,cursor_needs_physical,has_overlay,overlay_needs_physical,
[ 7.889791] [drm] Memory usable by graphics device = 128M
[ 7.889878] [drm:i915_gem_gtt_init], GMADR size = 128M
[ 7.889884] [drm:i915_gem_gtt_init], GTT stolen size = 8M
[ 7.889904] i915 0000:00:02.0: setting latency timer to 64
[ 7.890801] [drm:intel_detect_pch], No PCH found?
[ 7.891800] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
[ 7.891808] [drm:intel_opregion_setup], ACPI OpRegion not supported!
[ 7.891838] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.891922] [drm] Driver supports precise vblank timestamp query.
[ 7.891998] [drm:init_vbt_defaults], Set default to SSC at 66MHz
[ 7.892147] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 48 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 7.892157] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 7.892166] [drm:parse_sdvo_device_mapping], different child size is found. Invalid.
[ 7.892172] [drm:parse_device_mapping], different child size is found. Invalid.
[ 7.892185] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 7.892224] [drm] applying pipe a force quirk
[ 7.892302] [drm:intel_modeset_init], 2 display pipes available.
[ 7.892316] [drm:intel_modeset_init], pipe A sprite A init failed: -19
[ 7.892330] [drm:intel_modeset_init], pipe B sprite B init failed: -19
[ 7.892337] [drm:intel_shared_dpll_init], 0 shared PLLs initialized
[ 7.892349] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.893051] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 2
[ 7.893324] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 1
[ 7.893332] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 2
[ 7.893596] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 1
[ 7.893602] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 2
[ 7.893865] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 1
[ 7.893872] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus ssc. force bit now 2
[ 7.896475] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus ssc. force bit now 1
[ 7.896737] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fff000]
[ 7.900632] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware
[ 7.900994] [drm] initialized overlay support
[ 7.901095] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
[ 7.901109] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
[ 7.901118] [drm:intel_modeset_readout_hw_state], [ENCODER:6:DAC-6] hw state readout: disabled, pipe=0
[ 7.901128] [drm:intel_modeset_readout_hw_state], [ENCODER:7:None-7] hw state readout: enabled, pipe=0
[ 7.902007] [drm:intel_modeset_readout_hw_state], [CONNECTOR:8:LVDS-1] hw state readout: enabled
[ 7.902016] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:VGA-1] hw state readout: disabled
[ 7.902026] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[ 7.902034] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 7.902039] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 7.902045] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 7.902053] [drm:intel_dump_pipe_config], requested mode:
[ 7.902059] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1024 0 0 0 768 0 0 0 0x0 0x0
[ 7.902070] [drm:intel_dump_pipe_config], adjusted mode:
[ 7.902075] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 65000 0 0 0 0 0 0 0 0 0x0 0x5
[ 7.902086] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 7.902093] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 7.902099] [drm:intel_dump_pipe_config], ips: 0
[ 7.907088] [drm:intel_sanitize_crtc], [CRTC:4] hw state adjusted, was enabled, now disabled
[ 7.907096] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
[ 7.907102] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 7.907107] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 7.907113] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 7.907121] [drm:intel_dump_pipe_config], requested mode:
[ 7.907126] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 480 0 0 0 0x0 0x0
[ 7.907137] [drm:intel_dump_pipe_config], adjusted mode:
[ 7.907142] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 25153 0 0 0 0 0 0 0 0 0x0 0x0
[ 7.907152] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 7.907159] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 7.907165] [drm:intel_dump_pipe_config], ips: 0
[ 7.908055] [drm:intel_connector_check_state], [CONNECTOR:8:LVDS-1]
[ 7.908064] [drm:check_encoder_state], [ENCODER:6:DAC-6]
[ 7.908071] [drm:check_encoder_state], [ENCODER:7:None-7]
[ 7.908078] [drm:check_crtc_state], [CRTC:3]
[ 7.908092] [drm:check_crtc_state], [CRTC:4]
[ 7.908116] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1]
[ 7.908123] [drm:intel_dvo_detect], [CONNECTOR:8:LVDS-1]
[ 7.908389] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 7.908406] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1] probed modes :
[ 7.908413] [drm:drm_mode_debug_printmodeline], Modeline 9:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0x5
[ 7.908426] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 7.908433] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
[ 7.908698] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 7.908704] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 7.908713] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
[ 7.908720] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[ 7.908982] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 7.908989] [drm:drm_setup_crtcs],
[ 7.908995] [drm:drm_enable_connectors], connector 8 enabled? yes
[ 7.909001] [drm:drm_enable_connectors], connector 5 enabled? no
[ 7.909007] [drm:drm_target_preferred], looking for cmdline mode on connector 8
[ 7.909013] [drm:drm_target_preferred], looking for preferred mode on connector 8
[ 7.909019] [drm:drm_target_preferred], found mode 1024x768
[ 7.909025] [drm:drm_setup_crtcs], picking CRTCs for 2048x2048 config
[ 7.909033] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 3
[ 7.920215] [drm:intelfb_create], allocated 1024x768 fb: 0x00060000, bo dbf002a0
[ 7.920589] fbcon: inteldrmfb (fb0) is primary device
[ 7.922051] [drm:intel_crtc_set_config], [CRTC:3] [FB:11] #connectors=1 (x y) (0 0)
[ 7.922058] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[ 7.922062] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 7.922072] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 7.922082] [drm:drm_mode_debug_printmodeline], Modeline 10:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0x5
[ 7.922086] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
[ 7.922094] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:LVDS-1] to [CRTC:3]
[ 7.922102] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 7.922113] [drm:connected_sink_compute_bpp], [CONNECTOR:8:LVDS-1] checking for sink bpp constrains
[ 7.922121] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 7.922126] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 7.922130] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 7.922134] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 7.922140] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 7.922142] [drm:intel_dump_pipe_config], requested mode:
[ 7.922152] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0x5
[ 7.922155] [drm:intel_dump_pipe_config], adjusted mode:
[ 7.922164] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0x5
[ 7.922169] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 7.922173] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 7.922176] [drm:intel_dump_pipe_config], ips: 0
[ 7.981163] [drm:i9xx_update_plane], Writing base 00060000 00000000 0 0 4096
[ 7.981173] [drm:intel_crtc_mode_set], [ENCODER:7:None-7] set [MODE:0:1024x768]
[ 7.983745] VR00: 0xa202
[ 7.984627] VR01: 0x0000
[ 7.985485] VR30: 0x0000
[ 7.987171] VR40: 0x3400
[ 7.988058] VR80: 0x0000
[ 7.989418] VR81: 0x0000
[ 7.991089] VR82: 0x000a
[ 7.991955] VR83: 0x000a
[ 7.992851] VR84: 0x000a
[ 7.993709] VR85: 0x000a
[ 7.994566] VR86: 0x000a
[ 7.995423] VR87: 0x000a
[ 8.008346] VR88: 0x000a
[ 8.009215] VR8E: 0x0002
[ 8.010072] VR8F: 0x0003
[ 8.010089] [drm:i830_get_fifo_size], FIFO size - (0x00017e5f) A: 47
[ 8.010094] [drm:intel_calculate_wm], FIFO entries required for mode: 41
[ 8.010097] [drm:intel_calculate_wm], FIFO watermark level: 4
[ 8.010101] [drm:i830_update_wm], Setting FIFO watermarks - A: 4
[ 8.010106] ------------[ cut here ]------------
[ 8.010232] WARNING: CPU: 0 PID: 190 at drivers/gpu/drm/i915/intel_display.c:1096 assert_pipe+0x80/0xe0 [i915]()
[ 8.010235] pipe A assertion failure (expected on, current off)
[ 8.010297] Modules linked in: i915(+) psmouse serio_raw microcode evdev pcspkr uhci_hcd ehci_hcd snd_intel8x0 snd_ac97_codec ac97_bus i2c_algo_bit snd_pcm e100 mii firewire_ohci firewire_core drm_kms_helper snd_page_alloc usbcore thinkpad_acpi pcmcia snd_seq airo crc_itu_t thermal battery drm snd_seq_device snd_timer snd yenta_socket pcmcia_rsrc pcmcia_core ac parport_pc parport acpi_cpufreq processor soundcore rfkill floppy video button shpchp i2c_i801 thermal_sys rng_core i2c_core usb_common
[ 8.010305] CPU: 0 PID: 190 Comm: modprobe Not tainted 3.12.0-rc1-00273-g2457aaf #31
[ 8.010308] Hardware name: IBM 26724XG/26724XG, BIOS 1KET48WW (1.09 ) 06/16/2006
[ 8.010319] c131b486 c102e155 e0896850 c00438c8 000000be e08954a4 00000448 e08504d0
[ 8.010328] e08504d0 ddae8000 00000041 00000000 00000000 c102e1a3 00000009 c00438b0
[ 8.010337] e0896850 c00438c8 e08504d0 e08954a4 00000448 e0896850 00000041 e089c976
[ 8.010338] Call Trace:
[ 8.010356] [<c131b486>] ? dump_stack+0xa/0x13
[ 8.010364] [<c102e155>] ? warn_slowpath_common+0x75/0x90
[ 8.010423] [<e08504d0>] ? assert_pipe+0x80/0xe0 [i915]
[ 8.010479] [<e08504d0>] ? assert_pipe+0x80/0xe0 [i915]
[ 8.010486] [<c102e1a3>] ? warn_slowpath_fmt+0x33/0x40
[ 8.010543] [<e08504d0>] ? assert_pipe+0x80/0xe0 [i915]
[ 8.010600] [<e0850c2d>] ? i9xx_crtc_enable+0xcd/0x3f0 [i915]
[ 8.010660] [<e0856e7c>] ? __intel_set_mode+0x76c/0x12b0 [i915]
[ 8.010723] [<e0859b4d>] ? intel_set_mode+0x1d/0x40 [i915]
[ 8.010782] [<e085a3df>] ? intel_crtc_set_config+0x77f/0x960 [i915]
[ 8.010814] [<e19b5803>] ? drm_mode_set_config_internal+0x43/0xb0 [drm]
[ 8.010827] [<e211e215>] ? drm_fb_helper_set_par+0x45/0xb0 [drm_kms_helper]
[ 8.010835] [<c11b1862>] ? fbcon_init+0x482/0x4d0
[ 8.010844] [<c11ef07e>] ? set_inverse_trans_unicode.isra.4+0xfe/0x120
[ 8.010851] [<c11f03a6>] ? visual_init+0x96/0xf0
[ 8.010858] [<c11f2524>] ? do_bind_con_driver+0x104/0x2d0
[ 8.010869] [<c1105446>] ? sysfs_add_file_mode+0x76/0xa0
[ 8.010875] [<c11f2bc6>] ? do_take_over_console+0xf6/0x190
[ 8.010882] [<c11ad477>] ? do_fbcon_takeover+0x57/0xc0
[ 8.010891] [<c10477d6>] ? notifier_call_chain+0x46/0x60
[ 8.010898] [<c1047a07>] ? __blocking_notifier_call_chain+0x37/0x50
[ 8.010904] [<c1047a37>] ? blocking_notifier_call_chain+0x17/0x20
[ 8.010914] [<c11a5a60>] ? register_framebuffer+0x1b0/0x2d0
[ 8.010924] [<e211df25>] ? drm_fb_helper_initial_config+0x2e5/0x490 [drm_kms_helper]
[ 8.010944] [<e19b4493>] ? drm_mode_config_reset+0x93/0xb0 [drm]
[ 8.010956] [<c10b1781>] ? __kmalloc+0xb1/0xe0
[ 8.010965] [<e211d2e8>] ? drm_fb_helper_single_add_all_connectors+0x58/0xa0 [drm_kms_helper]
[ 8.011015] [<e0830c8f>] ? i915_driver_load+0xeef/0xf30 [i915]
[ 8.011062] [<e082db90>] ? i915_emit_breadcrumb+0xe0/0xe0 [i915]
[ 8.011086] [<e19b22ae>] ? drm_get_pci_dev+0xfe/0x2a0 [drm]
[ 8.011095] [<c11970e3>] ? pci_device_probe+0x63/0xb0
[ 8.011107] [<c120c310>] ? __device_attach+0x30/0x30
[ 8.011114] [<c120c163>] ? driver_probe_device+0x53/0x1d0
[ 8.011125] [<c117608a>] ? kobject_add_internal+0x7a/0x2a0
[ 8.011131] [<c120c381>] ? __driver_attach+0x71/0x80
[ 8.011138] [<c120a9df>] ? bus_for_each_dev+0x3f/0x70
[ 8.011144] [<c120bd66>] ? driver_attach+0x16/0x20
[ 8.011151] [<c120c310>] ? __device_attach+0x30/0x30
[ 8.011157] [<c120ba1f>] ? bus_add_driver+0x19f/0x250
[ 8.011164] [<c120c851>] ? driver_register+0x51/0xd0
[ 8.011171] [<e0800000>] ? 0xe07fffff
[ 8.011176] [<e0800000>] ? 0xe07fffff
[ 8.011183] [<c1000402>] ? do_one_initcall+0xe2/0x130
[ 8.011193] [<c10a6bf0>] ? __vunmap+0x80/0xe0
[ 8.011200] [<c10b151e>] ? kfree+0x8e/0xc0
[ 8.011206] [<c10a6bd7>] ? __vunmap+0x67/0xe0
[ 8.011212] [<c10a6bd7>] ? __vunmap+0x67/0xe0
[ 8.011218] [<c10b151e>] ? kfree+0x8e/0xc0
[ 8.011226] [<c106c59b>] ? load_module+0x151b/0x1cd0
[ 8.011239] [<c106cdbb>] ? SyS_init_module+0x6b/0xa0
[ 8.011254] [<c131e981>] ? sysenter_do_call+0x12/0x22
[ 8.011258] ---[ end trace f023ad1d5635ec00 ]---
[ 8.070299] [drm:intel_connector_check_state], [CONNECTOR:8:LVDS-1]
[ 8.070309] [drm:check_encoder_state], [ENCODER:6:DAC-6]
[ 8.070314] [drm:check_encoder_state], [ENCODER:7:None-7]
[ 8.070319] [drm:check_crtc_state], [CRTC:3]
[ 8.070339] [drm:check_crtc_state], [CRTC:4]
[ 8.070353] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 8.070362] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 8.070399] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:LVDS-1] to [CRTC:3]
[ 8.071137] [drm:intel_crtc_set_config], [CRTC:3] [FB:11] #connectors=1 (x y) (0 0)
[ 8.071146] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 8.071152] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:LVDS-1] to [CRTC:3]
[ 8.086737] Console: switching to colour frame buffer device 128x48
[ 8.086862] [drm:intel_crtc_set_config], [CRTC:3] [FB:11] #connectors=1 (x y) (0 0)
[ 8.086868] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 8.086874] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:LVDS-1] to [CRTC:3]
[ 8.456640] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 8.461816] i915 0000:00:02.0: registered panic notifier
[ 8.468629] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.480340] modprobe (190) used greatest stack depth: 5320 bytes left
[ 9.613209] Adding 1028092k swap on /dev/sda5. Priority:-1 extents:1 across:1028092k
[ 9.673629] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 9.927379] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.857110] fuse init (API version 7.22)
[ 10.916585] loop: module loaded
[ 12.661826] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.995892] [drm:intel_crtc_set_config], [CRTC:3] [FB:11] #connectors=1 (x y) (0 0)
[ 12.995902] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 12.995909] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:LVDS-1] to [CRTC:3]
[ 14.779583] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
[ 16.325067] Bluetooth: Core ver 2.16
[ 16.332596] NET: Registered protocol family 31
[ 16.338996] Bluetooth: HCI device and connection manager initialized
[ 16.345531] Bluetooth: HCI socket layer initialized
[ 16.353109] Bluetooth: L2CAP socket layer initialized
[ 16.360165] Bluetooth: SCO socket layer initialized
[ 16.432300] Bluetooth: RFCOMM TTY layer initialized
[ 16.439630] Bluetooth: RFCOMM socket layer initialized
[ 16.445820] Bluetooth: RFCOMM ver 1.11
[ 16.490518] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.496439] Bluetooth: BNEP filters: protocol multicast
[ 16.504884] Bluetooth: BNEP socket layer initialized
[ 18.157283] [drm:intel_crtc_set_config], [CRTC:3] [FB:11] #connectors=1 (x y) (0 0)
[ 18.157294] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 18.157303] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:LVDS-1] to [CRTC:3]
[ 18.496058] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
[ 18.496352] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 18.496360] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 20.715113] [drm:i915_driver_open],
[ 20.715253] [drm:intel_crtc_cursor_set], cursor off
[ 20.715263] [drm:intel_crtc_set_config], [CRTC:3] [FB:11] #connectors=1 (x y) (0 0)
[ 20.715278] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 20.715289] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:LVDS-1] to [CRTC:3]
[ 20.715298] [drm:intel_crtc_cursor_set], cursor off
[ 20.715304] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 20.715311] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 20.715319] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:LVDS-1] to [CRTC:3]
[ 20.715418] [drm:i915_driver_open],
[ 20.715598] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 20.737028] [drm:intel_crtc_cursor_set], cursor off
[ 20.737037] [drm:intel_crtc_set_config], [CRTC:3] [FB:11] #connectors=1 (x y) (0 0)
[ 20.737048] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 20.737058] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:LVDS-1] to [CRTC:3]
[ 20.737067] [drm:intel_crtc_cursor_set], cursor off
[ 20.737073] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 20.737079] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 20.737087] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:LVDS-1] to [CRTC:3]
[ 20.737410] [drm:i915_driver_open],
[ 20.737480] [drm:intel_crtc_cursor_set], cursor off
[ 20.737488] [drm:intel_crtc_set_config], [CRTC:3] [FB:11] #connectors=1 (x y) (0 0)
[ 20.737498] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 20.737506] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:LVDS-1] to [CRTC:3]
[ 20.737513] [drm:intel_crtc_cursor_set], cursor off
[ 20.737519] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 20.737525] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 20.737533] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:LVDS-1] to [CRTC:3]
[ 20.737627] [drm:i915_driver_open],
[ 20.738536] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 20.738550] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 20.738698] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 20.738709] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1]
[ 20.738717] [drm:intel_dvo_detect], [CONNECTOR:8:LVDS-1]
[ 20.738997] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 20.739016] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1] probed modes :
[ 20.739024] [drm:drm_mode_debug_printmodeline], Modeline 9:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0x5
[ 20.739043] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 20.739607] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 20.739619] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 20.739627] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
[ 20.739896] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 20.739903] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 20.739912] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
[ 20.739919] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[ 20.741434] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 20.741452] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 20.741460] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 20.741467] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
[ 20.741732] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 20.741739] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 20.741746] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
[ 20.741753] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[ 20.742015] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 20.742141] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 20.742151] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1]
[ 20.742157] [drm:intel_dvo_detect], [CONNECTOR:8:LVDS-1]
[ 20.742422] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 20.742438] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1] probed modes :
[ 20.742445] [drm:drm_mode_debug_printmodeline], Modeline 9:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0x5
[ 20.742461] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 20.744856] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 20.744867] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 20.744874] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
[ 20.745142] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 20.745148] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 20.745156] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
[ 20.745163] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[ 20.745426] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 20.745436] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 20.745444] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 20.745450] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
[ 20.745713] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 20.745719] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 20.745727] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
[ 20.745733] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[ 20.745995] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 20.867626] [drm:drm_mode_addfb], [FB:12]
[ 20.867802] [drm:drm_mode_setcrtc], [CRTC:3]
[ 20.867818] [drm:drm_mode_setcrtc], [CONNECTOR:8:LVDS-1]
[ 20.867828] [drm:intel_crtc_set_config], [CRTC:3] [FB:12] #connectors=1 (x y) (0 0)
[ 20.867840] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
[ 20.867851] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:LVDS-1] to [CRTC:3]
[ 20.879817] [drm:i9xx_update_plane], Writing base 00400000 00000000 0 0 4096
[ 20.900198] [drm:drm_mode_setcrtc], [CRTC:4]
[ 20.900217] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 20.900229] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 20.900239] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:LVDS-1] to [CRTC:3]
[ 28.512107] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
[ 28.512415] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 28.512422] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 30.660819] [drm:intel_dvo_detect], [CONNECTOR:8:LVDS-1]
[ 30.660894] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
[ 30.661177] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 30.661185] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 30.661194] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
[ 30.661202] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[ 31.054007] [drm:i8xx_irq_handler], pipe B underrun
[ 38.528091] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
[ 38.528382] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 38.528390] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 48.544099] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
[ 48.544395] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 48.544403] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 50.820224] e100 0000:01:08.0 eth0: NIC Link is Up 100 Mbps Full Duplex
[ 50.820449] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 58.560104] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
[ 58.560397] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 58.560405] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 64.242801] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 64.242828] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1]
[ 64.242837] [drm:intel_dvo_detect], [CONNECTOR:8:LVDS-1]
[ 64.243116] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 64.243139] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1] probed modes :
[ 64.243147] [drm:drm_mode_debug_printmodeline], Modeline 9:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0x5
[ 64.243168] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 64.243829] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 64.243840] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 64.243848] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
[ 64.244728] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 64.244737] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 64.244748] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
[ 64.244755] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[ 64.245019] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 64.245032] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 64.245040] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 64.245046] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
[ 64.245310] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 64.245316] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 64.245323] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
[ 64.245330] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[ 64.245591] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 64.246377] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 64.246387] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1]
[ 64.246394] [drm:intel_dvo_detect], [CONNECTOR:8:LVDS-1]
[ 64.246660] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 64.246675] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1] probed modes :
[ 64.246683] [drm:drm_mode_debug_printmodeline], Modeline 9:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0x5
[ 64.246699] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 64.247275] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 64.247284] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 64.247291] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
[ 64.252165] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 64.252186] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 64.252199] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
[ 64.252208] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[ 64.252482] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 64.252514] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 64.252524] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 64.252530] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
[ 64.252794] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 64.252800] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 64.252807] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
[ 64.252814] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[ 64.253076] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 64.906158] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 64.906187] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1]
[ 64.906195] [drm:intel_dvo_detect], [CONNECTOR:8:LVDS-1]
[ 64.906477] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 64.906502] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1] probed modes :
[ 64.906510] [drm:drm_mode_debug_printmodeline], Modeline 9:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0x5
[ 64.906530] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 64.907192] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 64.907203] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 64.907211] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
[ 64.907478] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 64.907485] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 64.907495] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
[ 64.907502] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[ 64.907765] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 64.907776] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 64.907783] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 64.907789] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
[ 64.908053] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 64.908059] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 64.908066] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
[ 64.908073] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[ 64.912592] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 68.576075] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
[ 68.576362] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 68.576368] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 78.592096] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
[ 78.592385] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 78.592392] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 88.608160] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
[ 88.608450] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 88.608457] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
--
Meelis Roos (mroos@linux.ee)
^ permalink raw reply [flat|nested] 13+ messages in thread
* i835GM flicker on panning
[not found] ` <4319_1379778790_523DC0E3_4319_13540_1_CAKMK7uHynzChMurTLAYMfeRF07aDJxes-6eSO1iDbrET8xD84Q@mail.gmail.com>
@ 2013-09-22 17:06 ` Thomas Richter
2013-09-22 20:03 ` Daniel Vetter
[not found] ` <16566_1379880205_523F4D0D_16566_5011_1_CAKMK7uFNAhahpURH-LFj=x+8D2W7Z8y_-9OKhnJ_O4g7hyqu1Q@mail.gmail.com>
0 siblings, 2 replies; 13+ messages in thread
From: Thomas Richter @ 2013-09-22 17:06 UTC (permalink / raw)
To: Daniel Vetter, linux-kernel
Hi folks, hi Daniel,
there is still an issue with flicker on panning with the 835GM chipset.
As already explained, the flicker only appears if the panning position
satisfies certain alignment constraints, in specific. As long as the
plane pointer is aligned to 64 byte boundaries, everything works correctly.
I tried now to add a parameter to the kernel to adjust the watermark
level of the chipset and see whether this makes any difference with
regards to the flicker. However, it does not. It seems that the trouble
is not there.
However, I noticed something interesting: If I use a non-native mode of
the display, i.e. enable the scaling feature of the DVO, everything
works, and no flicker ever appears. However, in these situations the
resolution is also lower than that of the native display, and hence the
issue may also be related to the PLL clock.
I also noticed that if I invert the display, i.e. use the rotation
feature, even in the native resolution, nothing flickers, though panning
is rather slow.
Does this somehow ring a bell? Can I somehow force the driver to use the
same logic for the regular display as for the inverted display to avoid
the flicker?
Any help would be appreciated.
Greetings,
Thomas
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: i835GM flicker on panning
2013-09-22 17:06 ` i835GM flicker on panning Thomas Richter
@ 2013-09-22 20:03 ` Daniel Vetter
2013-09-22 21:50 ` [Intel-gfx] " Chris Wilson
[not found] ` <16566_1379880205_523F4D0D_16566_5011_1_CAKMK7uFNAhahpURH-LFj=x+8D2W7Z8y_-9OKhnJ_O4g7hyqu1Q@mail.gmail.com>
1 sibling, 1 reply; 13+ messages in thread
From: Daniel Vetter @ 2013-09-22 20:03 UTC (permalink / raw)
To: Thomas Richter; +Cc: Linux Kernel Mailing List, intel-gfx
Hm, that sounds a bit more like the ddx is having fun with rendering.
Have you tried switching the backed from to either SNA or UXA? Also
adding relevant mailing lists ...
-Daniel
On Sun, Sep 22, 2013 at 7:06 PM, Thomas Richter <thor@math.tu-berlin.de> wrote:
> Hi folks, hi Daniel,
>
> there is still an issue with flicker on panning with the 835GM chipset. As
> already explained, the flicker only appears if the panning position
> satisfies certain alignment constraints, in specific. As long as the plane
> pointer is aligned to 64 byte boundaries, everything works correctly.
>
> I tried now to add a parameter to the kernel to adjust the watermark level
> of the chipset and see whether this makes any difference with regards to the
> flicker. However, it does not. It seems that the trouble is not there.
>
> However, I noticed something interesting: If I use a non-native mode of the
> display, i.e. enable the scaling feature of the DVO, everything works, and
> no flicker ever appears. However, in these situations the resolution is also
> lower than that of the native display, and hence the issue may also be
> related to the PLL clock.
>
> I also noticed that if I invert the display, i.e. use the rotation feature,
> even in the native resolution, nothing flickers, though panning is rather
> slow.
>
> Does this somehow ring a bell? Can I somehow force the driver to use the
> same logic for the regular display as for the inverted display to avoid the
> flicker?
>
> Any help would be appreciated.
>
> Greetings,
> Thomas
>
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Intel-gfx] i835GM flicker on panning
2013-09-22 20:03 ` Daniel Vetter
@ 2013-09-22 21:50 ` Chris Wilson
0 siblings, 0 replies; 13+ messages in thread
From: Chris Wilson @ 2013-09-22 21:50 UTC (permalink / raw)
To: Daniel Vetter; +Cc: Thomas Richter, intel-gfx, Linux Kernel Mailing List
On Sun, Sep 22, 2013 at 10:03:21PM +0200, Daniel Vetter wrote:
> Hm, that sounds a bit more like the ddx is having fun with rendering.
> Have you tried switching the backed from to either SNA or UXA? Also
> adding relevant mailing lists ...
If it was just the ddx, you would observe the same tearing with the
rotated setup as well. The question here would be whether it is tearing
or flicker? Tearing would just be the usual frontbuffer rendering
artifact. However, flicker could be misrendering of a DRI client (seeing
the backbuffer etc) or a clock timing issue (pipe underruns and whatnot).
Using a rotated framebuffer would disable pageflipping, and prevent the
historically common glitches when flipping. (Historically? That's
hysterical!)
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: i835GM flicker on panning
[not found] ` <16566_1379880205_523F4D0D_16566_5011_1_CAKMK7uFNAhahpURH-LFj=x+8D2W7Z8y_-9OKhnJ_O4g7hyqu1Q@mail.gmail.com>
@ 2013-09-22 22:33 ` Thomas Richter
2013-09-23 7:32 ` Daniel Vetter
[not found] ` <17822_1379921548_523FEE8C_17822_1617_1_20130923073242.GA32145@phenom.ffwll.local>
0 siblings, 2 replies; 13+ messages in thread
From: Thomas Richter @ 2013-09-22 22:33 UTC (permalink / raw)
To: Daniel Vetter; +Cc: Linux Kernel Mailing List, intel-gfx
On 22.09.2013 22:03, Daniel Vetter wrote:
> Hm, that sounds a bit more like the ddx is having fun with rendering.
> Have you tried switching the backed from to either SNA or UXA? Also
> adding relevant mailing lists ...
>
No, whether I use uxa or sna makes no difference, same problem. I don't
think it's rendering related. The rendering is ok (except for some
defects in tuxracer if sna is used instead of uxa).
Greetings,
Thomas
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: i835GM flicker on panning
2013-09-22 22:33 ` Thomas Richter
@ 2013-09-23 7:32 ` Daniel Vetter
[not found] ` <17822_1379921548_523FEE8C_17822_1617_1_20130923073242.GA32145@phenom.ffwll.local>
1 sibling, 0 replies; 13+ messages in thread
From: Daniel Vetter @ 2013-09-23 7:32 UTC (permalink / raw)
To: Thomas Richter; +Cc: Daniel Vetter, Linux Kernel Mailing List, intel-gfx
On Mon, Sep 23, 2013 at 12:33:04AM +0200, Thomas Richter wrote:
> On 22.09.2013 22:03, Daniel Vetter wrote:
> >Hm, that sounds a bit more like the ddx is having fun with rendering.
> >Have you tried switching the backed from to either SNA or UXA? Also
> >adding relevant mailing lists ...
> >
> No, whether I use uxa or sna makes no difference, same problem. I
> don't think it's rendering related. The rendering is ok (except for
> some defects in tuxracer if sna is used instead of uxa).
Can you please test with
Option "LinearFramebuffer" "true"?
Thanks, Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: i835GM flicker on panning
[not found] ` <17822_1379921548_523FEE8C_17822_1617_1_20130923073242.GA32145@phenom.ffwll.local>
@ 2013-09-23 8:30 ` Thomas Richter
2013-09-23 10:21 ` Thomas Richter
1 sibling, 0 replies; 13+ messages in thread
From: Thomas Richter @ 2013-09-23 8:30 UTC (permalink / raw)
To: Linux Kernel Mailing List, intel-gfx
Hi Daniel, hi others,
>> On 22.09.2013 22:03, Daniel Vetter wrote:
>>> Hm, that sounds a bit more like the ddx is having fun with rendering.
>>> Have you tried switching the backed from to either SNA or UXA? Also
>>> adding relevant mailing lists ...
>>>
>> No, whether I use uxa or sna makes no difference, same problem. I
>> don't think it's rendering related. The rendering is ok (except for
>> some defects in tuxracer if sna is used instead of uxa).
>
> Can you please test with
>
> Option "LinearFramebuffer" "true"?
Did. Still flickers. I'm not quite sure, but it seems to me that there
is at least one change (but allow me to test): If I'm now panning from
left to right (move the mouse to the right), then the screen is stable.
If I move it to the left, I get the flicker. Which is pretty strange.
Unless I'm completely mistaken, the tiled mode created flicker no matter
whether I scrolled left to right or right to left, it just depended on
the position. Wierd.
Greetings,
Thomas
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: i835GM flicker on panning
[not found] ` <17822_1379921548_523FEE8C_17822_1617_1_20130923073242.GA32145@phenom.ffwll.local>
2013-09-23 8:30 ` Thomas Richter
@ 2013-09-23 10:21 ` Thomas Richter
2013-09-24 9:02 ` [Intel-gfx] " Daniel Vetter
1 sibling, 1 reply; 13+ messages in thread
From: Thomas Richter @ 2013-09-23 10:21 UTC (permalink / raw)
To: Linux Kernel Mailing List, intel-gfx
Hi folks,
> Can you please test with
>
> Option "LinearFramebuffer" "true"?
>
> Thanks, Daniel
Tested again. Yes, indeed, LinearFramebuffer does make a difference.
Without it, panning to the right causes flicker, with it, moving the
mouse to the right - panning right (thus scrolling the screen to the
left) causes no flicker. Scrolling into the other direction always
causes flicker, no matter what.
Greetings,
Thomas
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Intel-gfx] i835GM flicker on panning
2013-09-23 10:21 ` Thomas Richter
@ 2013-09-24 9:02 ` Daniel Vetter
0 siblings, 0 replies; 13+ messages in thread
From: Daniel Vetter @ 2013-09-24 9:02 UTC (permalink / raw)
To: Thomas Richter; +Cc: Linux Kernel Mailing List, intel-gfx
On Mon, Sep 23, 2013 at 12:21:30PM +0200, Thomas Richter wrote:
> Hi folks,
>
> >Can you please test with
> >
> > Option "LinearFramebuffer" "true"?
> >
> >Thanks, Daniel
>
> Tested again. Yes, indeed, LinearFramebuffer does make a difference.
> Without it, panning to the right causes flicker, with it, moving the
> mouse to the right - panning right (thus scrolling the screen to the
> left) causes no flicker. Scrolling into the other direction always
> causes flicker, no matter what.
Hm, this is something I've completely missed thus far: Does the flicker
only happen when you pan, or also when the image is at a stable postion
(but not aligned to one of the safe boundaries you've identified)?
Thanks, Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2013-09-24 9:02 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-26 13:14 i915 pipe A assertion failure (expected on, current off) Meelis Roos
2013-09-21 15:29 ` Meelis Roos
2013-09-21 15:48 ` Daniel Vetter
2013-09-21 16:03 ` Ville Syrjälä
2013-09-22 6:02 ` Meelis Roos
[not found] ` <4319_1379778790_523DC0E3_4319_13540_1_CAKMK7uHynzChMurTLAYMfeRF07aDJxes-6eSO1iDbrET8xD84Q@mail.gmail.com>
2013-09-22 17:06 ` i835GM flicker on panning Thomas Richter
2013-09-22 20:03 ` Daniel Vetter
2013-09-22 21:50 ` [Intel-gfx] " Chris Wilson
[not found] ` <16566_1379880205_523F4D0D_16566_5011_1_CAKMK7uFNAhahpURH-LFj=x+8D2W7Z8y_-9OKhnJ_O4g7hyqu1Q@mail.gmail.com>
2013-09-22 22:33 ` Thomas Richter
2013-09-23 7:32 ` Daniel Vetter
[not found] ` <17822_1379921548_523FEE8C_17822_1617_1_20130923073242.GA32145@phenom.ffwll.local>
2013-09-23 8:30 ` Thomas Richter
2013-09-23 10:21 ` Thomas Richter
2013-09-24 9:02 ` [Intel-gfx] " Daniel Vetter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).