* [PATCH] spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2
@ 2020-01-18 9:40 Lubomir Rintel
2020-01-21 17:29 ` Applied "spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2" to the spi tree Mark Brown
0 siblings, 1 reply; 2+ messages in thread
From: Lubomir Rintel @ 2020-01-18 9:40 UTC (permalink / raw)
To: Mark Brown
Cc: Daniel Mack, Haojian Zhuang, Robert Jarzmik, linux-arm-kernel,
linux-spi, linux-kernel, Lubomir Rintel
A read from a Winbond W25Q32FV SPI NOR memory chip on my MMP2 returns
wrong data.
It seems like SSE doesn't do the right thing on MMP2 at all. After
enabling the SPI port back again, the FIFO reads return garbage. Things
can be brought back to order by telling the PMU to reset the block.
Here's a good transaction with said chip:
# busybox devmem 0xd4035000 32 0x00001987 # SSCR0
# echo 0 >/sys/class/gpio/gpio46/value # (assert CS)
# busybox devmem 0xd4035010 32 0x0000009f # SSDR (read ID command)
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 # SSDR
0x000000ff
# busybox devmem 0xd4035010 # SSDR
0x000000ef # Correct response
# busybox devmem 0xd4035010 # SSDR
0x00000040
# busybox devmem 0xd4035010 # SSDR
0x00000016
# busybox devmem 0xd4035010 # SSDR
0x00000000
# busybox devmem 0xd4035010 # SSDR
0x00000000
# busybox devmem 0xd4035010 # SSDR
0x00000000
# echo 1 >/sys/class/gpio/gpio46/value # (deassert CS)
#
Flipping off an on SSE, then running another transaction:
# busybox devmem 0xd4035000 32 0x00001907 # SSCR0, SSE off
# busybox devmem 0xd4035000 32 0x00001987 # SSCR0, SSE on
# echo 0 >/sys/class/gpio/gpio46/value # (assert CS)
# busybox devmem 0xd4035010 32 0x0000009f # SSDR (read ID command)
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 # SSDR
0x000000ff
# busybox devmem 0xd4035010 # SSDR
0x000000ff # Garbage!
# busybox devmem 0xd4035010 # SSDR
0x000000ff # Oh no
# busybox devmem 0xd4035010 # SSDR
0x000000ff
# busybox devmem 0xd4035010 # SSDR
0x000000ff
# busybox devmem 0xd4035010 # SSDR
0x000000ff
# busybox devmem 0xd4035010 # SSDR
0x000000ff
# echo 1 >/sys/class/gpio/gpio46/value # (deassert CS)
#
Sometimes the response is not just ones, but something that looks like
bits of a response from a previous transaction.
I can't see a fix other than not touching the SSE altogether after the
device is first brought up.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
drivers/spi/spi-pxa2xx.c | 28 +++++++++++++++++-----------
1 file changed, 17 insertions(+), 11 deletions(-)
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 9071333ebdd86..df1b30b2c2745 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -461,6 +461,16 @@ int pxa2xx_spi_flush(struct driver_data *drv_data)
return limit;
}
+static void pxa2xx_spi_off(struct driver_data *drv_data)
+{
+ /* On MMP, disabling SSE seems to corrupt the rx fifo */
+ if (drv_data->ssp_type == MMP2_SSP)
+ return;
+
+ pxa2xx_spi_write(drv_data, SSCR0,
+ pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+}
+
static int null_writer(struct driver_data *drv_data)
{
u8 n_bytes = drv_data->n_bytes;
@@ -587,8 +597,7 @@ static void int_error_stop(struct driver_data *drv_data, const char* msg)
if (!pxa25x_ssp_comp(drv_data))
pxa2xx_spi_write(drv_data, SSTO, 0);
pxa2xx_spi_flush(drv_data);
- pxa2xx_spi_write(drv_data, SSCR0,
- pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+ pxa2xx_spi_off(drv_data);
dev_err(&drv_data->pdev->dev, "%s\n", msg);
@@ -686,8 +695,7 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
static void handle_bad_msg(struct driver_data *drv_data)
{
- pxa2xx_spi_write(drv_data, SSCR0,
- pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+ pxa2xx_spi_off(drv_data);
pxa2xx_spi_write(drv_data, SSCR1,
pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1);
if (!pxa25x_ssp_comp(drv_data))
@@ -1062,7 +1070,8 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
|| (pxa2xx_spi_read(drv_data, SSCR1) & change_mask)
!= (cr1 & change_mask)) {
/* stop the SSP, and update the other bits */
- pxa2xx_spi_write(drv_data, SSCR0, cr0 & ~SSCR0_SSE);
+ if (drv_data->ssp_type != MMP2_SSP)
+ pxa2xx_spi_write(drv_data, SSCR0, cr0 & ~SSCR0_SSE);
if (!pxa25x_ssp_comp(drv_data))
pxa2xx_spi_write(drv_data, SSTO, chip->timeout);
/* first set CR1 without interrupt and service enables */
@@ -1118,8 +1127,7 @@ static int pxa2xx_spi_slave_abort(struct spi_controller *controller)
if (!pxa25x_ssp_comp(drv_data))
pxa2xx_spi_write(drv_data, SSTO, 0);
pxa2xx_spi_flush(drv_data);
- pxa2xx_spi_write(drv_data, SSCR0,
- pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+ pxa2xx_spi_off(drv_data);
dev_dbg(&drv_data->pdev->dev, "transfer aborted\n");
@@ -1135,8 +1143,7 @@ static void pxa2xx_spi_handle_err(struct spi_controller *controller,
struct driver_data *drv_data = spi_controller_get_devdata(controller);
/* Disable the SSP */
- pxa2xx_spi_write(drv_data, SSCR0,
- pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+ pxa2xx_spi_off(drv_data);
/* Clear and disable interrupts and service requests */
write_SSSR_CS(drv_data, drv_data->clear_sr);
pxa2xx_spi_write(drv_data, SSCR1,
@@ -1161,8 +1168,7 @@ static int pxa2xx_spi_unprepare_transfer(struct spi_controller *controller)
struct driver_data *drv_data = spi_controller_get_devdata(controller);
/* Disable the SSP now */
- pxa2xx_spi_write(drv_data, SSCR0,
- pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+ pxa2xx_spi_off(drv_data);
return 0;
}
--
2.24.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* Applied "spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2" to the spi tree
2020-01-18 9:40 [PATCH] spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2 Lubomir Rintel
@ 2020-01-21 17:29 ` Mark Brown
0 siblings, 0 replies; 2+ messages in thread
From: Mark Brown @ 2020-01-21 17:29 UTC (permalink / raw)
To: Lubomir Rintel
Cc: Daniel Mack, Haojian Zhuang, linux-arm-kernel, linux-kernel,
linux-spi, Mark Brown, Robert Jarzmik
The patch
spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.5
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 29d7e05c5f75fc2ebf3608743b6809aa0ff56800 Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Sat, 18 Jan 2020 10:40:31 +0100
Subject: [PATCH] spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2
A read from a Winbond W25Q32FV SPI NOR memory chip on my MMP2 returns
wrong data.
It seems like SSE doesn't do the right thing on MMP2 at all. After
enabling the SPI port back again, the FIFO reads return garbage. Things
can be brought back to order by telling the PMU to reset the block.
Here's a good transaction with said chip:
# busybox devmem 0xd4035000 32 0x00001987 # SSCR0
# echo 0 >/sys/class/gpio/gpio46/value # (assert CS)
# busybox devmem 0xd4035010 32 0x0000009f # SSDR (read ID command)
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 # SSDR
0x000000ff
# busybox devmem 0xd4035010 # SSDR
0x000000ef # Correct response
# busybox devmem 0xd4035010 # SSDR
0x00000040
# busybox devmem 0xd4035010 # SSDR
0x00000016
# busybox devmem 0xd4035010 # SSDR
0x00000000
# busybox devmem 0xd4035010 # SSDR
0x00000000
# busybox devmem 0xd4035010 # SSDR
0x00000000
# echo 1 >/sys/class/gpio/gpio46/value # (deassert CS)
#
Flipping off an on SSE, then running another transaction:
# busybox devmem 0xd4035000 32 0x00001907 # SSCR0, SSE off
# busybox devmem 0xd4035000 32 0x00001987 # SSCR0, SSE on
# echo 0 >/sys/class/gpio/gpio46/value # (assert CS)
# busybox devmem 0xd4035010 32 0x0000009f # SSDR (read ID command)
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 32 0x00000000 # SSDR
# busybox devmem 0xd4035010 # SSDR
0x000000ff
# busybox devmem 0xd4035010 # SSDR
0x000000ff # Garbage!
# busybox devmem 0xd4035010 # SSDR
0x000000ff # Oh no
# busybox devmem 0xd4035010 # SSDR
0x000000ff
# busybox devmem 0xd4035010 # SSDR
0x000000ff
# busybox devmem 0xd4035010 # SSDR
0x000000ff
# busybox devmem 0xd4035010 # SSDR
0x000000ff
# echo 1 >/sys/class/gpio/gpio46/value # (deassert CS)
#
Sometimes the response is not just ones, but something that looks like
bits of a response from a previous transaction.
I can't see a fix other than not touching the SSE altogether after the
device is first brought up.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200118094031.327373-1-lkundrak@v3.sk
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-pxa2xx.c | 28 +++++++++++++++++-----------
1 file changed, 17 insertions(+), 11 deletions(-)
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 8114d3289fdc..0408782c7ed0 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -461,6 +461,16 @@ int pxa2xx_spi_flush(struct driver_data *drv_data)
return limit;
}
+static void pxa2xx_spi_off(struct driver_data *drv_data)
+{
+ /* On MMP, disabling SSE seems to corrupt the rx fifo */
+ if (drv_data->ssp_type == MMP2_SSP)
+ return;
+
+ pxa2xx_spi_write(drv_data, SSCR0,
+ pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+}
+
static int null_writer(struct driver_data *drv_data)
{
u8 n_bytes = drv_data->n_bytes;
@@ -587,8 +597,7 @@ static void int_error_stop(struct driver_data *drv_data, const char* msg)
if (!pxa25x_ssp_comp(drv_data))
pxa2xx_spi_write(drv_data, SSTO, 0);
pxa2xx_spi_flush(drv_data);
- pxa2xx_spi_write(drv_data, SSCR0,
- pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+ pxa2xx_spi_off(drv_data);
dev_err(&drv_data->pdev->dev, "%s\n", msg);
@@ -686,8 +695,7 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
static void handle_bad_msg(struct driver_data *drv_data)
{
- pxa2xx_spi_write(drv_data, SSCR0,
- pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+ pxa2xx_spi_off(drv_data);
pxa2xx_spi_write(drv_data, SSCR1,
pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1);
if (!pxa25x_ssp_comp(drv_data))
@@ -1062,7 +1070,8 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
|| (pxa2xx_spi_read(drv_data, SSCR1) & change_mask)
!= (cr1 & change_mask)) {
/* stop the SSP, and update the other bits */
- pxa2xx_spi_write(drv_data, SSCR0, cr0 & ~SSCR0_SSE);
+ if (drv_data->ssp_type != MMP2_SSP)
+ pxa2xx_spi_write(drv_data, SSCR0, cr0 & ~SSCR0_SSE);
if (!pxa25x_ssp_comp(drv_data))
pxa2xx_spi_write(drv_data, SSTO, chip->timeout);
/* first set CR1 without interrupt and service enables */
@@ -1118,8 +1127,7 @@ static int pxa2xx_spi_slave_abort(struct spi_controller *controller)
if (!pxa25x_ssp_comp(drv_data))
pxa2xx_spi_write(drv_data, SSTO, 0);
pxa2xx_spi_flush(drv_data);
- pxa2xx_spi_write(drv_data, SSCR0,
- pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+ pxa2xx_spi_off(drv_data);
dev_dbg(&drv_data->pdev->dev, "transfer aborted\n");
@@ -1135,8 +1143,7 @@ static void pxa2xx_spi_handle_err(struct spi_controller *controller,
struct driver_data *drv_data = spi_controller_get_devdata(controller);
/* Disable the SSP */
- pxa2xx_spi_write(drv_data, SSCR0,
- pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+ pxa2xx_spi_off(drv_data);
/* Clear and disable interrupts and service requests */
write_SSSR_CS(drv_data, drv_data->clear_sr);
pxa2xx_spi_write(drv_data, SSCR1,
@@ -1161,8 +1168,7 @@ static int pxa2xx_spi_unprepare_transfer(struct spi_controller *controller)
struct driver_data *drv_data = spi_controller_get_devdata(controller);
/* Disable the SSP now */
- pxa2xx_spi_write(drv_data, SSCR0,
- pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+ pxa2xx_spi_off(drv_data);
return 0;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-01-21 17:29 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-18 9:40 [PATCH] spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2 Lubomir Rintel
2020-01-21 17:29 ` Applied "spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2" to the spi tree Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).