* [PATCH v4 0/2] mmc: host: s3cmci: add device tree support @ 2017-03-02 1:18 Sergio Prado 2017-03-02 1:18 ` [PATCH v4 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller Sergio Prado ` (2 more replies) 0 siblings, 3 replies; 9+ messages in thread From: Sergio Prado @ 2017-03-02 1:18 UTC (permalink / raw) To: ulf.hansson, robh+dt, mark.rutland, linux-mmc, devicetree, linux-kernel, ben-linux, linux-arm-kernel Cc: Sergio Prado This series adds support for configuring Samsung's S3C24XX MMC/SD/SDIO controller via device tree. Tested on FriendlyARM mini2440, based on s3c2440 SoC. Changes since v3 (as suggested by Rob Herring) - describing properties that wasn't documented and removing unnecessary comment in the device tree binding Changes since v2: - struct "s3cmci_drv_data" and flag "is2440" renamed - copying the whole driver data struct instead of only its member so it will be easier to extend the information in the future - using mmc_of_parse() to read "cd-gpios" and "wp-gpios" properties from device tree Changes since v1: - pinctrl description removed from DT binding - unit and label on DT binding renamed to mmc Sergio Prado (2): dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller mmc: host: s3cmci: allow probing from device tree .../devicetree/bindings/mmc/samsung,s3cmci.txt | 42 +++ drivers/mmc/host/s3cmci.c | 298 +++++++++++---------- drivers/mmc/host/s3cmci.h | 3 +- 3 files changed, 200 insertions(+), 143 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt -- 1.9.1 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v4 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller 2017-03-02 1:18 [PATCH v4 0/2] mmc: host: s3cmci: add device tree support Sergio Prado @ 2017-03-02 1:18 ` Sergio Prado 2017-03-03 2:07 ` Jaehoon Chung 2017-03-03 6:21 ` Rob Herring 2017-03-02 1:18 ` [PATCH v4 2/2] mmc: host: s3cmci: allow probing from device tree Sergio Prado 2017-03-16 12:06 ` [PATCH v4 0/2] mmc: host: s3cmci: add device tree support Ulf Hansson 2 siblings, 2 replies; 9+ messages in thread From: Sergio Prado @ 2017-03-02 1:18 UTC (permalink / raw) To: ulf.hansson, robh+dt, mark.rutland, linux-mmc, devicetree, linux-kernel, ben-linux, linux-arm-kernel Cc: Sergio Prado Adds the device tree bindings description for Samsung S3C24XX MMC/SD/SDIO controller, used as a connectivity interface with external MMC, SD and SDIO storage mediums. Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> --- .../devicetree/bindings/mmc/samsung,s3cmci.txt | 42 ++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt new file mode 100644 index 000000000000..5f68feb9f9d6 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt @@ -0,0 +1,42 @@ +* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings + +Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface +with external MMC, SD and SDIO storage mediums. + +This file documents differences between the core mmc properties described by +mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller +implementation. + +Required SoC Specific Properties: +- compatible: should be one of the following + - "samsung,s3c2410-sdi": for controllers compatible with s3c2410 + - "samsung,s3c2412-sdi": for controllers compatible with s3c2412 + - "samsung,s3c2440-sdi": for controllers compatible with s3c2440 +- reg: register location and length +- interrupts: mmc controller interrupt +- clocks: Should reference the controller clock +- clock-names: Should contain "sdi" + +Required Board Specific Properties: +- pinctrl-0: Should specify pin control groups used for this controller. +- pinctrl-names: Should contain only one value - "default". + +Optional Properties: +- bus-width: number of data lines (see mmc.txt) +- cd-gpios: gpio for card detection (see mmc.txt) +- wp-gpios: gpio for write protection (see mmc.txt) + +Example: + + mmc0: mmc@5a000000 { + compatible = "samsung,s3c2440-sdi"; + pinctrl-names = "default"; + pinctrl-0 = <&sdi_pins>; + reg = <0x5a000000 0x100000>; + interrupts = <0 0 21 3>; + clocks = <&clocks PCLK_SDI>; + clock-names = "sdi"; + bus-width = <4>; + cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>; + wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>; + }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v4 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller 2017-03-02 1:18 ` [PATCH v4 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller Sergio Prado @ 2017-03-03 2:07 ` Jaehoon Chung 2017-03-03 6:21 ` Rob Herring 1 sibling, 0 replies; 9+ messages in thread From: Jaehoon Chung @ 2017-03-03 2:07 UTC (permalink / raw) To: Sergio Prado, ulf.hansson, robh+dt, mark.rutland, linux-mmc, devicetree, linux-kernel, ben-linux, linux-arm-kernel On 03/02/2017 10:18 AM, Sergio Prado wrote: > Adds the device tree bindings description for Samsung S3C24XX > MMC/SD/SDIO controller, used as a connectivity interface with external > MMC, SD and SDIO storage mediums. > > Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> > --- > .../devicetree/bindings/mmc/samsung,s3cmci.txt | 42 ++++++++++++++++++++++ > 1 file changed, 42 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt > > diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt > new file mode 100644 > index 000000000000..5f68feb9f9d6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt > @@ -0,0 +1,42 @@ > +* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings > + > +Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface > +with external MMC, SD and SDIO storage mediums. > + > +This file documents differences between the core mmc properties described by > +mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller > +implementation. > + > +Required SoC Specific Properties: > +- compatible: should be one of the following > + - "samsung,s3c2410-sdi": for controllers compatible with s3c2410 > + - "samsung,s3c2412-sdi": for controllers compatible with s3c2412 > + - "samsung,s3c2440-sdi": for controllers compatible with s3c2440 > +- reg: register location and length > +- interrupts: mmc controller interrupt > +- clocks: Should reference the controller clock > +- clock-names: Should contain "sdi" > + > +Required Board Specific Properties: > +- pinctrl-0: Should specify pin control groups used for this controller. > +- pinctrl-names: Should contain only one value - "default". > + > +Optional Properties: > +- bus-width: number of data lines (see mmc.txt) > +- cd-gpios: gpio for card detection (see mmc.txt) > +- wp-gpios: gpio for write protection (see mmc.txt) I think these properties don't need to describe at here. It's common properties. Best Regards, Jaehoon Chung > + > +Example: > + > + mmc0: mmc@5a000000 { > + compatible = "samsung,s3c2440-sdi"; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdi_pins>; > + reg = <0x5a000000 0x100000>; > + interrupts = <0 0 21 3>; > + clocks = <&clocks PCLK_SDI>; > + clock-names = "sdi"; > + bus-width = <4>; > + cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>; > + wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>; > + }; > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v4 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller 2017-03-02 1:18 ` [PATCH v4 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller Sergio Prado 2017-03-03 2:07 ` Jaehoon Chung @ 2017-03-03 6:21 ` Rob Herring 1 sibling, 0 replies; 9+ messages in thread From: Rob Herring @ 2017-03-03 6:21 UTC (permalink / raw) To: Sergio Prado Cc: ulf.hansson, mark.rutland, linux-mmc, devicetree, linux-kernel, ben-linux, linux-arm-kernel On Wed, Mar 01, 2017 at 10:18:55PM -0300, Sergio Prado wrote: > Adds the device tree bindings description for Samsung S3C24XX > MMC/SD/SDIO controller, used as a connectivity interface with external > MMC, SD and SDIO storage mediums. > > Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> > --- > .../devicetree/bindings/mmc/samsung,s3cmci.txt | 42 ++++++++++++++++++++++ > 1 file changed, 42 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v4 2/2] mmc: host: s3cmci: allow probing from device tree 2017-03-02 1:18 [PATCH v4 0/2] mmc: host: s3cmci: add device tree support Sergio Prado 2017-03-02 1:18 ` [PATCH v4 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller Sergio Prado @ 2017-03-02 1:18 ` Sergio Prado 2017-03-03 2:14 ` Jaehoon Chung 2017-03-16 12:06 ` [PATCH v4 0/2] mmc: host: s3cmci: add device tree support Ulf Hansson 2 siblings, 1 reply; 9+ messages in thread From: Sergio Prado @ 2017-03-02 1:18 UTC (permalink / raw) To: ulf.hansson, robh+dt, mark.rutland, linux-mmc, devicetree, linux-kernel, ben-linux, linux-arm-kernel Cc: Sergio Prado Allows configuring Samsung S3C24XX MMC/SD/SDIO controller using a device tree. Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> --- drivers/mmc/host/s3cmci.c | 298 ++++++++++++++++++++++++---------------------- drivers/mmc/host/s3cmci.h | 3 +- 2 files changed, 158 insertions(+), 143 deletions(-) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 7a173f8c455b..d066dbdb957c 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -24,6 +24,10 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/mmc/slot-gpio.h> #include <plat/gpio-cfg.h> #include <mach/dma.h> @@ -128,6 +132,22 @@ enum dbg_channels { dbg_conf = (1 << 8), }; +struct s3cmci_variant_data { + int s3c2440_compatible; +}; + +static const struct s3cmci_variant_data s3c2410_s3cmci_variant_data = { + .s3c2440_compatible = 0, +}; + +static const struct s3cmci_variant_data s3c2412_s3cmci_variant_data = { + .s3c2440_compatible = 1, +}; + +static const struct s3cmci_variant_data s3c2440_s3cmci_variant_data = { + .s3c2440_compatible = 1, +}; + static const int dbgmap_err = dbg_fail; static const int dbgmap_info = dbg_info | dbg_conf; static const int dbgmap_debug = dbg_err | dbg_debug; @@ -731,7 +751,7 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id) goto clear_status_bits; /* Check for FIFO failure */ - if (host->is2440) { + if (host->variant->s3c2440_compatible) { if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) { dbg(host, dbg_err, "FIFO failure\n"); host->mrq->data->error = -EILSEQ; @@ -807,21 +827,6 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id) } -/* - * ISR for the CardDetect Pin -*/ - -static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id) -{ - struct s3cmci_host *host = (struct s3cmci_host *)dev_id; - - dbg(host, dbg_irq, "card detect\n"); - - mmc_detect_change(host->mmc, msecs_to_jiffies(500)); - - return IRQ_HANDLED; -} - static void s3cmci_dma_done_callback(void *arg) { struct s3cmci_host *host = arg; @@ -913,7 +918,7 @@ static void finalize_request(struct s3cmci_host *host) if (s3cmci_host_usedma(host)) dmaengine_terminate_all(host->dma); - if (host->is2440) { + if (host->variant->s3c2440_compatible) { /* Clear failure register and reset fifo. */ writel(S3C2440_SDIFSTA_FIFORESET | S3C2440_SDIFSTA_FIFOFAIL, @@ -1026,7 +1031,7 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) dcon |= S3C2410_SDIDCON_XFER_RXSTART; } - if (host->is2440) { + if (host->variant->s3c2440_compatible) { dcon |= S3C2440_SDIDCON_DS_WORD; dcon |= S3C2440_SDIDCON_DATSTART; } @@ -1045,7 +1050,7 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) /* write TIMER register */ - if (host->is2440) { + if (host->variant->s3c2440_compatible) { writel(0x007FFFFF, host->base + S3C2410_SDITIMER); } else { writel(0x0000FFFF, host->base + S3C2410_SDITIMER); @@ -1177,19 +1182,6 @@ static void s3cmci_send_request(struct mmc_host *mmc) s3cmci_enable_irq(host, true); } -static int s3cmci_card_present(struct mmc_host *mmc) -{ - struct s3cmci_host *host = mmc_priv(mmc); - struct s3c24xx_mci_pdata *pdata = host->pdata; - int ret; - - if (pdata->no_detect) - return -ENOSYS; - - ret = gpio_get_value(pdata->gpio_detect) ? 0 : 1; - return ret ^ pdata->detect_invert; -} - static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct s3cmci_host *host = mmc_priv(mmc); @@ -1198,7 +1190,7 @@ static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) host->cmd_is_stop = 0; host->mrq = mrq; - if (s3cmci_card_present(mmc) == 0) { + if (mmc_gpio_get_cd(mmc) == 0) { dbg(host, dbg_err, "%s: no medium present\n", __func__); host->mrq->cmd->error = -ENOMEDIUM; mmc_request_done(mmc, mrq); @@ -1242,22 +1234,24 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_ON: case MMC_POWER_UP: /* Configure GPE5...GPE10 pins in SD mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); + if (!host->pdev->dev.of_node) + s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); if (host->pdata->set_power) host->pdata->set_power(ios->power_mode, ios->vdd); - if (!host->is2440) + if (!host->variant->s3c2440_compatible) mci_con |= S3C2410_SDICON_FIFORESET; break; case MMC_POWER_OFF: default: - gpio_direction_output(S3C2410_GPE(5), 0); + if (!host->pdev->dev.of_node) + gpio_direction_output(S3C2410_GPE(5), 0); - if (host->is2440) + if (host->variant->s3c2440_compatible) mci_con |= S3C2440_SDICON_SDRESET; if (host->pdata->set_power) @@ -1295,21 +1289,6 @@ static void s3cmci_reset(struct s3cmci_host *host) writel(con, host->base + S3C2410_SDICON); } -static int s3cmci_get_ro(struct mmc_host *mmc) -{ - struct s3cmci_host *host = mmc_priv(mmc); - struct s3c24xx_mci_pdata *pdata = host->pdata; - int ret; - - if (pdata->no_wprotect) - return 0; - - ret = gpio_get_value(pdata->gpio_wprotect) ? 1 : 0; - ret ^= pdata->wprotect_invert; - - return ret; -} - static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable) { struct s3cmci_host *host = mmc_priv(mmc); @@ -1353,8 +1332,8 @@ static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable) static struct mmc_host_ops s3cmci_ops = { .request = s3cmci_request, .set_ios = s3cmci_set_ios, - .get_ro = s3cmci_get_ro, - .get_cd = s3cmci_card_present, + .get_ro = mmc_gpio_get_ro, + .get_cd = mmc_gpio_get_cd, .enable_sdio_irq = s3cmci_enable_sdio_irq, }; @@ -1430,7 +1409,7 @@ static int s3cmci_state_show(struct seq_file *seq, void *v) seq_printf(seq, "Register base = 0x%08x\n", (u32)host->base); seq_printf(seq, "Clock rate = %ld\n", host->clk_rate); seq_printf(seq, "Prescale = %d\n", host->prescaler); - seq_printf(seq, "is2440 = %d\n", host->is2440); + seq_printf(seq, "S3C2440 compatible = %d\n", host->variant->s3c2440_compatible); seq_printf(seq, "IRQ = %d\n", host->irq); seq_printf(seq, "IRQ enabled = %d\n", host->irq_enabled); seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled); @@ -1545,21 +1524,15 @@ static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { } #endif /* CONFIG_DEBUG_FS */ -static int s3cmci_probe(struct platform_device *pdev) +static int s3cmci_probe_pdata(struct s3cmci_host *host) { - struct s3cmci_host *host; - struct mmc_host *mmc; - int ret; - int is2440; - int i; + struct platform_device *pdev = host->pdev; + struct mmc_host *mmc = host->mmc; + struct s3c24xx_mci_pdata *pdata; + int i, ret; - is2440 = platform_get_device_id(pdev)->driver_data; - - mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); - if (!mmc) { - ret = -ENOMEM; - goto probe_out; - } + host->variant = (const struct s3cmci_variant_data *) + platform_get_device_id(pdev)->driver_data; for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) { ret = gpio_request(i, dev_name(&pdev->dev)); @@ -1569,25 +1542,103 @@ static int s3cmci_probe(struct platform_device *pdev) for (i--; i >= S3C2410_GPE(5); i--) gpio_free(i); - goto probe_free_host; + return ret; } } + if (!pdev->dev.platform_data) + pdev->dev.platform_data = &s3cmci_def_pdata; + + pdata = pdev->dev.platform_data; + + if (pdata->no_wprotect) + mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT; + + if (pdata->no_detect) + mmc->caps |= MMC_CAP_NEEDS_POLL; + + if (pdata->wprotect_invert); + mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + + if (pdata->detect_invert) + mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; + + if (gpio_is_valid(pdata->gpio_detect)) { + ret = mmc_gpio_request_cd(mmc, pdata->gpio_detect, 0); + if (ret) { + dev_err(&pdev->dev, "error requesting GPIO for CD %d\n", + ret); + return ret; + } + } + + if (gpio_is_valid(pdata->gpio_wprotect)) { + ret = mmc_gpio_request_ro(mmc, pdata->gpio_wprotect); + if (ret) { + dev_err(&pdev->dev, "error requesting GPIO for WP %d\n", + ret); + return ret; + } + } + + return 0; +} + +static int s3cmci_probe_dt(struct s3cmci_host *host) +{ + struct platform_device *pdev = host->pdev; + struct s3c24xx_mci_pdata *pdata; + struct mmc_host *mmc = host->mmc; + int ret; + + host->variant = of_device_get_match_data(&pdev->dev); + if (!host->variant) + return -ENODEV; + + ret = mmc_of_parse(mmc); + if (ret) + return ret; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdev->dev.platform_data = pdata; + + return 0; +} + +static int s3cmci_probe(struct platform_device *pdev) +{ + struct s3cmci_host *host; + struct mmc_host *mmc; + int ret; + int i; + + mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto probe_out; + } + host = mmc_priv(mmc); host->mmc = mmc; host->pdev = pdev; - host->is2440 = is2440; + + if (pdev->dev.of_node) + ret = s3cmci_probe_dt(host); + else + ret = s3cmci_probe_pdata(host); + + if (ret) + goto probe_free_host; host->pdata = pdev->dev.platform_data; - if (!host->pdata) { - pdev->dev.platform_data = &s3cmci_def_pdata; - host->pdata = &s3cmci_def_pdata; - } spin_lock_init(&host->complete_lock); tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); - if (is2440) { + if (host->variant->s3c2440_compatible) { host->sdiimsk = S3C2440_SDIIMSK; host->sdidata = S3C2440_SDIDATA; host->clk_div = 1; @@ -1645,43 +1696,6 @@ static int s3cmci_probe(struct platform_device *pdev) disable_irq(host->irq); host->irq_state = false; - if (!host->pdata->no_detect) { - ret = gpio_request(host->pdata->gpio_detect, "s3cmci detect"); - if (ret) { - dev_err(&pdev->dev, "failed to get detect gpio\n"); - goto probe_free_irq; - } - - host->irq_cd = gpio_to_irq(host->pdata->gpio_detect); - - if (host->irq_cd >= 0) { - if (request_irq(host->irq_cd, s3cmci_irq_cd, - IRQF_TRIGGER_RISING | - IRQF_TRIGGER_FALLING, - DRIVER_NAME, host)) { - dev_err(&pdev->dev, - "can't get card detect irq.\n"); - ret = -ENOENT; - goto probe_free_gpio_cd; - } - } else { - dev_warn(&pdev->dev, - "host detect has no irq available\n"); - gpio_direction_input(host->pdata->gpio_detect); - } - } else - host->irq_cd = -1; - - if (!host->pdata->no_wprotect) { - ret = gpio_request(host->pdata->gpio_wprotect, "s3cmci wp"); - if (ret) { - dev_err(&pdev->dev, "failed to get writeprotect\n"); - goto probe_free_irq_cd; - } - - gpio_direction_input(host->pdata->gpio_wprotect); - } - /* Depending on the dma state, get a DMA channel to use. */ if (s3cmci_host_usedma(host)) { @@ -1689,7 +1703,7 @@ static int s3cmci_probe(struct platform_device *pdev) ret = PTR_ERR_OR_ZERO(host->dma); if (ret) { dev_err(&pdev->dev, "cannot get DMA channel.\n"); - goto probe_free_gpio_wp; + goto probe_free_irq; } } @@ -1731,7 +1745,7 @@ static int s3cmci_probe(struct platform_device *pdev) dbg(host, dbg_debug, "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%p.\n", - (host->is2440?"2440":""), + (host->variant->s3c2440_compatible?"2440":""), host->base, host->irq, host->irq_cd, host->dma); ret = s3cmci_cpufreq_register(host); @@ -1768,18 +1782,6 @@ static int s3cmci_probe(struct platform_device *pdev) if (s3cmci_host_usedma(host)) dma_release_channel(host->dma); - probe_free_gpio_wp: - if (!host->pdata->no_wprotect) - gpio_free(host->pdata->gpio_wprotect); - - probe_free_gpio_cd: - if (!host->pdata->no_detect) - gpio_free(host->pdata->gpio_detect); - - probe_free_irq_cd: - if (host->irq_cd >= 0) - free_irq(host->irq_cd, host); - probe_free_irq: free_irq(host->irq, host); @@ -1790,8 +1792,9 @@ static int s3cmci_probe(struct platform_device *pdev) release_mem_region(host->mem->start, resource_size(host->mem)); probe_free_gpio: - for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) - gpio_free(i); + if (!pdev->dev.of_node) + for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) + gpio_free(i); probe_free_host: mmc_free_host(mmc); @@ -1818,7 +1821,6 @@ static int s3cmci_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); struct s3cmci_host *host = mmc_priv(mmc); - struct s3c24xx_mci_pdata *pd = host->pdata; int i; s3cmci_shutdown(pdev); @@ -1832,15 +1834,9 @@ static int s3cmci_remove(struct platform_device *pdev) free_irq(host->irq, host); - if (!pd->no_wprotect) - gpio_free(pd->gpio_wprotect); - - if (!pd->no_detect) - gpio_free(pd->gpio_detect); - - for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) - gpio_free(i); - + if (!pdev->dev.of_node) + for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) + gpio_free(i); iounmap(host->base); release_mem_region(host->mem->start, resource_size(host->mem)); @@ -1849,16 +1845,33 @@ static int s3cmci_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id s3cmci_dt_match[] = { + { + .compatible = "samsung,s3c2410-sdi", + .data = &s3c2410_s3cmci_variant_data, + }, + { + .compatible = "samsung,s3c2412-sdi", + .data = &s3c2412_s3cmci_variant_data, + }, + { + .compatible = "samsung,s3c2440-sdi", + .data = &s3c2440_s3cmci_variant_data, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match); + static const struct platform_device_id s3cmci_driver_ids[] = { { .name = "s3c2410-sdi", - .driver_data = 0, + .driver_data = (kernel_ulong_t) &s3c2410_s3cmci_variant_data, }, { .name = "s3c2412-sdi", - .driver_data = 1, + .driver_data = (kernel_ulong_t) &s3c2412_s3cmci_variant_data, }, { .name = "s3c2440-sdi", - .driver_data = 1, + .driver_data = (kernel_ulong_t) &s3c2440_s3cmci_variant_data, }, { } }; @@ -1868,6 +1881,7 @@ static int s3cmci_remove(struct platform_device *pdev) static struct platform_driver s3cmci_driver = { .driver = { .name = "s3c-sdi", + .of_match_table = s3cmci_dt_match, }, .id_table = s3cmci_driver_ids, .probe = s3cmci_probe, diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h index 30c2c0dd1bc8..e9fe48915a2e 100644 --- a/drivers/mmc/host/s3cmci.h +++ b/drivers/mmc/host/s3cmci.h @@ -33,7 +33,8 @@ struct s3cmci_host { unsigned long real_rate; u8 prescaler; - int is2440; + const struct s3cmci_variant_data *variant; + unsigned sdiimsk; unsigned sdidata; -- 1.9.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v4 2/2] mmc: host: s3cmci: allow probing from device tree 2017-03-02 1:18 ` [PATCH v4 2/2] mmc: host: s3cmci: allow probing from device tree Sergio Prado @ 2017-03-03 2:14 ` Jaehoon Chung 2017-03-03 11:38 ` Sergio Prado 0 siblings, 1 reply; 9+ messages in thread From: Jaehoon Chung @ 2017-03-03 2:14 UTC (permalink / raw) To: Sergio Prado, ulf.hansson, robh+dt, mark.rutland, linux-mmc, devicetree, linux-kernel, ben-linux, linux-arm-kernel On 03/02/2017 10:18 AM, Sergio Prado wrote: > Allows configuring Samsung S3C24XX MMC/SD/SDIO controller using a device > tree. > > Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> > --- > drivers/mmc/host/s3cmci.c | 298 ++++++++++++++++++++++++---------------------- > drivers/mmc/host/s3cmci.h | 3 +- > 2 files changed, 158 insertions(+), 143 deletions(-) > > diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c > index 7a173f8c455b..d066dbdb957c 100644 > --- a/drivers/mmc/host/s3cmci.c > +++ b/drivers/mmc/host/s3cmci.c > @@ -24,6 +24,10 @@ > #include <linux/interrupt.h> > #include <linux/irq.h> > #include <linux/io.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/of_gpio.h> > +#include <linux/mmc/slot-gpio.h> > > #include <plat/gpio-cfg.h> > #include <mach/dma.h> > @@ -128,6 +132,22 @@ enum dbg_channels { > dbg_conf = (1 << 8), > }; > > +struct s3cmci_variant_data { > + int s3c2440_compatible; > +}; I didn't understand why this structure needs. Before this patch, host->is2440; After this patch, host->variant->s3c2440_compatible; Just add the one pointer for checking s3c2400 compatible.. Is it really meaningful? (I didn't read the previous comments fully.) Best Regards, Jaehoon Chung > + > +static const struct s3cmci_variant_data s3c2410_s3cmci_variant_data = { > + .s3c2440_compatible = 0, > +}; > + > +static const struct s3cmci_variant_data s3c2412_s3cmci_variant_data = { > + .s3c2440_compatible = 1, > +}; > + > +static const struct s3cmci_variant_data s3c2440_s3cmci_variant_data = { > + .s3c2440_compatible = 1, > +}; > + > static const int dbgmap_err = dbg_fail; > static const int dbgmap_info = dbg_info | dbg_conf; > static const int dbgmap_debug = dbg_err | dbg_debug; > @@ -731,7 +751,7 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id) > goto clear_status_bits; > > /* Check for FIFO failure */ > - if (host->is2440) { > + if (host->variant->s3c2440_compatible) { > if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) { > dbg(host, dbg_err, "FIFO failure\n"); > host->mrq->data->error = -EILSEQ; > @@ -807,21 +827,6 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id) > > } > > -/* > - * ISR for the CardDetect Pin > -*/ > - > -static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id) > -{ > - struct s3cmci_host *host = (struct s3cmci_host *)dev_id; > - > - dbg(host, dbg_irq, "card detect\n"); > - > - mmc_detect_change(host->mmc, msecs_to_jiffies(500)); > - > - return IRQ_HANDLED; > -} > - > static void s3cmci_dma_done_callback(void *arg) > { > struct s3cmci_host *host = arg; > @@ -913,7 +918,7 @@ static void finalize_request(struct s3cmci_host *host) > if (s3cmci_host_usedma(host)) > dmaengine_terminate_all(host->dma); > > - if (host->is2440) { > + if (host->variant->s3c2440_compatible) { > /* Clear failure register and reset fifo. */ > writel(S3C2440_SDIFSTA_FIFORESET | > S3C2440_SDIFSTA_FIFOFAIL, > @@ -1026,7 +1031,7 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) > dcon |= S3C2410_SDIDCON_XFER_RXSTART; > } > > - if (host->is2440) { > + if (host->variant->s3c2440_compatible) { > dcon |= S3C2440_SDIDCON_DS_WORD; > dcon |= S3C2440_SDIDCON_DATSTART; > } > @@ -1045,7 +1050,7 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) > > /* write TIMER register */ > > - if (host->is2440) { > + if (host->variant->s3c2440_compatible) { > writel(0x007FFFFF, host->base + S3C2410_SDITIMER); > } else { > writel(0x0000FFFF, host->base + S3C2410_SDITIMER); > @@ -1177,19 +1182,6 @@ static void s3cmci_send_request(struct mmc_host *mmc) > s3cmci_enable_irq(host, true); > } > > -static int s3cmci_card_present(struct mmc_host *mmc) > -{ > - struct s3cmci_host *host = mmc_priv(mmc); > - struct s3c24xx_mci_pdata *pdata = host->pdata; > - int ret; > - > - if (pdata->no_detect) > - return -ENOSYS; > - > - ret = gpio_get_value(pdata->gpio_detect) ? 0 : 1; > - return ret ^ pdata->detect_invert; > -} > - > static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) > { > struct s3cmci_host *host = mmc_priv(mmc); > @@ -1198,7 +1190,7 @@ static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) > host->cmd_is_stop = 0; > host->mrq = mrq; > > - if (s3cmci_card_present(mmc) == 0) { > + if (mmc_gpio_get_cd(mmc) == 0) { > dbg(host, dbg_err, "%s: no medium present\n", __func__); > host->mrq->cmd->error = -ENOMEDIUM; > mmc_request_done(mmc, mrq); > @@ -1242,22 +1234,24 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > case MMC_POWER_ON: > case MMC_POWER_UP: > /* Configure GPE5...GPE10 pins in SD mode */ > - s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2), > - S3C_GPIO_PULL_NONE); > + if (!host->pdev->dev.of_node) > + s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2), > + S3C_GPIO_PULL_NONE); > > if (host->pdata->set_power) > host->pdata->set_power(ios->power_mode, ios->vdd); > > - if (!host->is2440) > + if (!host->variant->s3c2440_compatible) > mci_con |= S3C2410_SDICON_FIFORESET; > > break; > > case MMC_POWER_OFF: > default: > - gpio_direction_output(S3C2410_GPE(5), 0); > + if (!host->pdev->dev.of_node) > + gpio_direction_output(S3C2410_GPE(5), 0); > > - if (host->is2440) > + if (host->variant->s3c2440_compatible) > mci_con |= S3C2440_SDICON_SDRESET; > > if (host->pdata->set_power) > @@ -1295,21 +1289,6 @@ static void s3cmci_reset(struct s3cmci_host *host) > writel(con, host->base + S3C2410_SDICON); > } > > -static int s3cmci_get_ro(struct mmc_host *mmc) > -{ > - struct s3cmci_host *host = mmc_priv(mmc); > - struct s3c24xx_mci_pdata *pdata = host->pdata; > - int ret; > - > - if (pdata->no_wprotect) > - return 0; > - > - ret = gpio_get_value(pdata->gpio_wprotect) ? 1 : 0; > - ret ^= pdata->wprotect_invert; > - > - return ret; > -} > - > static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable) > { > struct s3cmci_host *host = mmc_priv(mmc); > @@ -1353,8 +1332,8 @@ static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable) > static struct mmc_host_ops s3cmci_ops = { > .request = s3cmci_request, > .set_ios = s3cmci_set_ios, > - .get_ro = s3cmci_get_ro, > - .get_cd = s3cmci_card_present, > + .get_ro = mmc_gpio_get_ro, > + .get_cd = mmc_gpio_get_cd, > .enable_sdio_irq = s3cmci_enable_sdio_irq, > }; > > @@ -1430,7 +1409,7 @@ static int s3cmci_state_show(struct seq_file *seq, void *v) > seq_printf(seq, "Register base = 0x%08x\n", (u32)host->base); > seq_printf(seq, "Clock rate = %ld\n", host->clk_rate); > seq_printf(seq, "Prescale = %d\n", host->prescaler); > - seq_printf(seq, "is2440 = %d\n", host->is2440); > + seq_printf(seq, "S3C2440 compatible = %d\n", host->variant->s3c2440_compatible); > seq_printf(seq, "IRQ = %d\n", host->irq); > seq_printf(seq, "IRQ enabled = %d\n", host->irq_enabled); > seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled); > @@ -1545,21 +1524,15 @@ static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { } > > #endif /* CONFIG_DEBUG_FS */ > > -static int s3cmci_probe(struct platform_device *pdev) > +static int s3cmci_probe_pdata(struct s3cmci_host *host) > { > - struct s3cmci_host *host; > - struct mmc_host *mmc; > - int ret; > - int is2440; > - int i; > + struct platform_device *pdev = host->pdev; > + struct mmc_host *mmc = host->mmc; > + struct s3c24xx_mci_pdata *pdata; > + int i, ret; > > - is2440 = platform_get_device_id(pdev)->driver_data; > - > - mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); > - if (!mmc) { > - ret = -ENOMEM; > - goto probe_out; > - } > + host->variant = (const struct s3cmci_variant_data *) > + platform_get_device_id(pdev)->driver_data; > > for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) { > ret = gpio_request(i, dev_name(&pdev->dev)); > @@ -1569,25 +1542,103 @@ static int s3cmci_probe(struct platform_device *pdev) > for (i--; i >= S3C2410_GPE(5); i--) > gpio_free(i); > > - goto probe_free_host; > + return ret; > } > } > > + if (!pdev->dev.platform_data) > + pdev->dev.platform_data = &s3cmci_def_pdata; > + > + pdata = pdev->dev.platform_data; > + > + if (pdata->no_wprotect) > + mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT; > + > + if (pdata->no_detect) > + mmc->caps |= MMC_CAP_NEEDS_POLL; > + > + if (pdata->wprotect_invert); > + mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; > + > + if (pdata->detect_invert) > + mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; > + > + if (gpio_is_valid(pdata->gpio_detect)) { > + ret = mmc_gpio_request_cd(mmc, pdata->gpio_detect, 0); > + if (ret) { > + dev_err(&pdev->dev, "error requesting GPIO for CD %d\n", > + ret); > + return ret; > + } > + } > + > + if (gpio_is_valid(pdata->gpio_wprotect)) { > + ret = mmc_gpio_request_ro(mmc, pdata->gpio_wprotect); > + if (ret) { > + dev_err(&pdev->dev, "error requesting GPIO for WP %d\n", > + ret); > + return ret; > + } > + } > + > + return 0; > +} > + > +static int s3cmci_probe_dt(struct s3cmci_host *host) > +{ > + struct platform_device *pdev = host->pdev; > + struct s3c24xx_mci_pdata *pdata; > + struct mmc_host *mmc = host->mmc; > + int ret; > + > + host->variant = of_device_get_match_data(&pdev->dev); > + if (!host->variant) > + return -ENODEV; > + > + ret = mmc_of_parse(mmc); > + if (ret) > + return ret; > + > + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); > + if (!pdata) > + return -ENOMEM; > + > + pdev->dev.platform_data = pdata; > + > + return 0; > +} > + > +static int s3cmci_probe(struct platform_device *pdev) > +{ > + struct s3cmci_host *host; > + struct mmc_host *mmc; > + int ret; > + int i; > + > + mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); > + if (!mmc) { > + ret = -ENOMEM; > + goto probe_out; > + } > + > host = mmc_priv(mmc); > host->mmc = mmc; > host->pdev = pdev; > - host->is2440 = is2440; > + > + if (pdev->dev.of_node) > + ret = s3cmci_probe_dt(host); > + else > + ret = s3cmci_probe_pdata(host); > + > + if (ret) > + goto probe_free_host; > > host->pdata = pdev->dev.platform_data; > - if (!host->pdata) { > - pdev->dev.platform_data = &s3cmci_def_pdata; > - host->pdata = &s3cmci_def_pdata; > - } > > spin_lock_init(&host->complete_lock); > tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); > > - if (is2440) { > + if (host->variant->s3c2440_compatible) { > host->sdiimsk = S3C2440_SDIIMSK; > host->sdidata = S3C2440_SDIDATA; > host->clk_div = 1; > @@ -1645,43 +1696,6 @@ static int s3cmci_probe(struct platform_device *pdev) > disable_irq(host->irq); > host->irq_state = false; > > - if (!host->pdata->no_detect) { > - ret = gpio_request(host->pdata->gpio_detect, "s3cmci detect"); > - if (ret) { > - dev_err(&pdev->dev, "failed to get detect gpio\n"); > - goto probe_free_irq; > - } > - > - host->irq_cd = gpio_to_irq(host->pdata->gpio_detect); > - > - if (host->irq_cd >= 0) { > - if (request_irq(host->irq_cd, s3cmci_irq_cd, > - IRQF_TRIGGER_RISING | > - IRQF_TRIGGER_FALLING, > - DRIVER_NAME, host)) { > - dev_err(&pdev->dev, > - "can't get card detect irq.\n"); > - ret = -ENOENT; > - goto probe_free_gpio_cd; > - } > - } else { > - dev_warn(&pdev->dev, > - "host detect has no irq available\n"); > - gpio_direction_input(host->pdata->gpio_detect); > - } > - } else > - host->irq_cd = -1; > - > - if (!host->pdata->no_wprotect) { > - ret = gpio_request(host->pdata->gpio_wprotect, "s3cmci wp"); > - if (ret) { > - dev_err(&pdev->dev, "failed to get writeprotect\n"); > - goto probe_free_irq_cd; > - } > - > - gpio_direction_input(host->pdata->gpio_wprotect); > - } > - > /* Depending on the dma state, get a DMA channel to use. */ > > if (s3cmci_host_usedma(host)) { > @@ -1689,7 +1703,7 @@ static int s3cmci_probe(struct platform_device *pdev) > ret = PTR_ERR_OR_ZERO(host->dma); > if (ret) { > dev_err(&pdev->dev, "cannot get DMA channel.\n"); > - goto probe_free_gpio_wp; > + goto probe_free_irq; > } > } > > @@ -1731,7 +1745,7 @@ static int s3cmci_probe(struct platform_device *pdev) > > dbg(host, dbg_debug, > "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%p.\n", > - (host->is2440?"2440":""), > + (host->variant->s3c2440_compatible?"2440":""), > host->base, host->irq, host->irq_cd, host->dma); > > ret = s3cmci_cpufreq_register(host); > @@ -1768,18 +1782,6 @@ static int s3cmci_probe(struct platform_device *pdev) > if (s3cmci_host_usedma(host)) > dma_release_channel(host->dma); > > - probe_free_gpio_wp: > - if (!host->pdata->no_wprotect) > - gpio_free(host->pdata->gpio_wprotect); > - > - probe_free_gpio_cd: > - if (!host->pdata->no_detect) > - gpio_free(host->pdata->gpio_detect); > - > - probe_free_irq_cd: > - if (host->irq_cd >= 0) > - free_irq(host->irq_cd, host); > - > probe_free_irq: > free_irq(host->irq, host); > > @@ -1790,8 +1792,9 @@ static int s3cmci_probe(struct platform_device *pdev) > release_mem_region(host->mem->start, resource_size(host->mem)); > > probe_free_gpio: > - for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) > - gpio_free(i); > + if (!pdev->dev.of_node) > + for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) > + gpio_free(i); > > probe_free_host: > mmc_free_host(mmc); > @@ -1818,7 +1821,6 @@ static int s3cmci_remove(struct platform_device *pdev) > { > struct mmc_host *mmc = platform_get_drvdata(pdev); > struct s3cmci_host *host = mmc_priv(mmc); > - struct s3c24xx_mci_pdata *pd = host->pdata; > int i; > > s3cmci_shutdown(pdev); > @@ -1832,15 +1834,9 @@ static int s3cmci_remove(struct platform_device *pdev) > > free_irq(host->irq, host); > > - if (!pd->no_wprotect) > - gpio_free(pd->gpio_wprotect); > - > - if (!pd->no_detect) > - gpio_free(pd->gpio_detect); > - > - for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) > - gpio_free(i); > - > + if (!pdev->dev.of_node) > + for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) > + gpio_free(i); > > iounmap(host->base); > release_mem_region(host->mem->start, resource_size(host->mem)); > @@ -1849,16 +1845,33 @@ static int s3cmci_remove(struct platform_device *pdev) > return 0; > } > > +static const struct of_device_id s3cmci_dt_match[] = { > + { > + .compatible = "samsung,s3c2410-sdi", > + .data = &s3c2410_s3cmci_variant_data, > + }, > + { > + .compatible = "samsung,s3c2412-sdi", > + .data = &s3c2412_s3cmci_variant_data, > + }, > + { > + .compatible = "samsung,s3c2440-sdi", > + .data = &s3c2440_s3cmci_variant_data, > + }, > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match); > + > static const struct platform_device_id s3cmci_driver_ids[] = { > { > .name = "s3c2410-sdi", > - .driver_data = 0, > + .driver_data = (kernel_ulong_t) &s3c2410_s3cmci_variant_data, > }, { > .name = "s3c2412-sdi", > - .driver_data = 1, > + .driver_data = (kernel_ulong_t) &s3c2412_s3cmci_variant_data, > }, { > .name = "s3c2440-sdi", > - .driver_data = 1, > + .driver_data = (kernel_ulong_t) &s3c2440_s3cmci_variant_data, > }, > { } > }; > @@ -1868,6 +1881,7 @@ static int s3cmci_remove(struct platform_device *pdev) > static struct platform_driver s3cmci_driver = { > .driver = { > .name = "s3c-sdi", > + .of_match_table = s3cmci_dt_match, > }, > .id_table = s3cmci_driver_ids, > .probe = s3cmci_probe, > diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h > index 30c2c0dd1bc8..e9fe48915a2e 100644 > --- a/drivers/mmc/host/s3cmci.h > +++ b/drivers/mmc/host/s3cmci.h > @@ -33,7 +33,8 @@ struct s3cmci_host { > unsigned long real_rate; > u8 prescaler; > > - int is2440; > + const struct s3cmci_variant_data *variant; > + > unsigned sdiimsk; > unsigned sdidata; > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v4 2/2] mmc: host: s3cmci: allow probing from device tree 2017-03-03 2:14 ` Jaehoon Chung @ 2017-03-03 11:38 ` Sergio Prado 2017-03-06 3:41 ` Jaehoon Chung 0 siblings, 1 reply; 9+ messages in thread From: Sergio Prado @ 2017-03-03 11:38 UTC (permalink / raw) To: Jaehoon Chung Cc: ulf.hansson, robh+dt, mark.rutland, linux-mmc, devicetree, linux-kernel, ben-linux, linux-arm-kernel On Fri, Mar 03, 2017 at 11:14:29AM +0900, Jaehoon Chung wrote: > On 03/02/2017 10:18 AM, Sergio Prado wrote: > > Allows configuring Samsung S3C24XX MMC/SD/SDIO controller using a device > > tree. > > > > Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> > > --- > > drivers/mmc/host/s3cmci.c | 298 ++++++++++++++++++++++++---------------------- > > drivers/mmc/host/s3cmci.h | 3 +- > > 2 files changed, 158 insertions(+), 143 deletions(-) > > > > diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c > > index 7a173f8c455b..d066dbdb957c 100644 > > --- a/drivers/mmc/host/s3cmci.c > > +++ b/drivers/mmc/host/s3cmci.c > > @@ -24,6 +24,10 @@ > > #include <linux/interrupt.h> > > #include <linux/irq.h> > > #include <linux/io.h> > > +#include <linux/of.h> > > +#include <linux/of_device.h> > > +#include <linux/of_gpio.h> > > +#include <linux/mmc/slot-gpio.h> > > > > #include <plat/gpio-cfg.h> > > #include <mach/dma.h> > > @@ -128,6 +132,22 @@ enum dbg_channels { > > dbg_conf = (1 << 8), > > }; > > > > +struct s3cmci_variant_data { > > + int s3c2440_compatible; > > +}; > > I didn't understand why this structure needs. > > Before this patch, > host->is2440; > > After this patch, > host->variant->s3c2440_compatible; > > Just add the one pointer for checking s3c2400 compatible.. > Is it really meaningful? > (I didn't read the previous comments fully.) Although just a pointer would be enought, having a structure makes it more flexible to extend it in the future. Best regards, Sergio Prado ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v4 2/2] mmc: host: s3cmci: allow probing from device tree 2017-03-03 11:38 ` Sergio Prado @ 2017-03-06 3:41 ` Jaehoon Chung 0 siblings, 0 replies; 9+ messages in thread From: Jaehoon Chung @ 2017-03-06 3:41 UTC (permalink / raw) To: Sergio Prado Cc: ulf.hansson, robh+dt, mark.rutland, linux-mmc, devicetree, linux-kernel, ben-linux, linux-arm-kernel On 03/03/2017 08:38 PM, Sergio Prado wrote: > On Fri, Mar 03, 2017 at 11:14:29AM +0900, Jaehoon Chung wrote: >> On 03/02/2017 10:18 AM, Sergio Prado wrote: >>> Allows configuring Samsung S3C24XX MMC/SD/SDIO controller using a device >>> tree. >>> >>> Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> >>> --- >>> drivers/mmc/host/s3cmci.c | 298 ++++++++++++++++++++++++---------------------- >>> drivers/mmc/host/s3cmci.h | 3 +- >>> 2 files changed, 158 insertions(+), 143 deletions(-) >>> >>> diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c >>> index 7a173f8c455b..d066dbdb957c 100644 >>> --- a/drivers/mmc/host/s3cmci.c >>> +++ b/drivers/mmc/host/s3cmci.c >>> @@ -24,6 +24,10 @@ >>> #include <linux/interrupt.h> >>> #include <linux/irq.h> >>> #include <linux/io.h> >>> +#include <linux/of.h> >>> +#include <linux/of_device.h> >>> +#include <linux/of_gpio.h> >>> +#include <linux/mmc/slot-gpio.h> >>> >>> #include <plat/gpio-cfg.h> >>> #include <mach/dma.h> >>> @@ -128,6 +132,22 @@ enum dbg_channels { >>> dbg_conf = (1 << 8), >>> }; >>> >>> +struct s3cmci_variant_data { >>> + int s3c2440_compatible; >>> +}; >> >> I didn't understand why this structure needs. >> >> Before this patch, >> host->is2440; >> >> After this patch, >> host->variant->s3c2440_compatible; >> >> Just add the one pointer for checking s3c2400 compatible.. >> Is it really meaningful? >> (I didn't read the previous comments fully.) > > Although just a pointer would be enought, having a structure makes it > more flexible to extend it in the future. If you will add the other members in this structure, it's ok. But if it's only for compatible, i don't agree this. Best Regards, Jaehoon Chung > > Best regards, > > Sergio Prado > > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v4 0/2] mmc: host: s3cmci: add device tree support 2017-03-02 1:18 [PATCH v4 0/2] mmc: host: s3cmci: add device tree support Sergio Prado 2017-03-02 1:18 ` [PATCH v4 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller Sergio Prado 2017-03-02 1:18 ` [PATCH v4 2/2] mmc: host: s3cmci: allow probing from device tree Sergio Prado @ 2017-03-16 12:06 ` Ulf Hansson 2 siblings, 0 replies; 9+ messages in thread From: Ulf Hansson @ 2017-03-16 12:06 UTC (permalink / raw) To: Sergio Prado Cc: Rob Herring, Mark Rutland, linux-mmc, devicetree, linux-kernel, Ben Dooks, linux-arm-kernel On 2 March 2017 at 02:18, Sergio Prado <sergio.prado@e-labworks.com> wrote: > This series adds support for configuring Samsung's S3C24XX MMC/SD/SDIO > controller via device tree. > > Tested on FriendlyARM mini2440, based on s3c2440 SoC. > > Changes since v3 (as suggested by Rob Herring) > - describing properties that wasn't documented and removing unnecessary > comment in the device tree binding > > Changes since v2: > - struct "s3cmci_drv_data" and flag "is2440" renamed > - copying the whole driver data struct instead of only its member so > it will be easier to extend the information in the future > - using mmc_of_parse() to read "cd-gpios" and "wp-gpios" properties > from device tree > > Changes since v1: > - pinctrl description removed from DT binding > - unit and label on DT binding renamed to mmc > > Sergio Prado (2): > dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller > mmc: host: s3cmci: allow probing from device tree > > .../devicetree/bindings/mmc/samsung,s3cmci.txt | 42 +++ > drivers/mmc/host/s3cmci.c | 298 +++++++++++---------- > drivers/mmc/host/s3cmci.h | 3 +- > 3 files changed, 200 insertions(+), 143 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt > > -- > 1.9.1 > Sergio, can you please re-spin and address the comments from Jaehoon, then I am happy to apply this! Kind regards Uffe ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2017-03-16 12:06 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-03-02 1:18 [PATCH v4 0/2] mmc: host: s3cmci: add device tree support Sergio Prado 2017-03-02 1:18 ` [PATCH v4 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller Sergio Prado 2017-03-03 2:07 ` Jaehoon Chung 2017-03-03 6:21 ` Rob Herring 2017-03-02 1:18 ` [PATCH v4 2/2] mmc: host: s3cmci: allow probing from device tree Sergio Prado 2017-03-03 2:14 ` Jaehoon Chung 2017-03-03 11:38 ` Sergio Prado 2017-03-06 3:41 ` Jaehoon Chung 2017-03-16 12:06 ` [PATCH v4 0/2] mmc: host: s3cmci: add device tree support Ulf Hansson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).