* [PATCH v3 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel
@ 2021-07-06 7:59 Yunus Bas
2021-07-06 7:59 ` [PATCH v3 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel Yunus Bas
[not found] ` <YOiQo3B9JtE0kuO7@ravnborg.org>
0 siblings, 2 replies; 5+ messages in thread
From: Yunus Bas @ 2021-07-06 7:59 UTC (permalink / raw)
To: sam, laurent.pinchart, thierry.reding, dri-devel, linux-kernel
Cc: airlied, daniel
From: Stefan Riedmueller <s.riedmueller@phytec.de>
This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel
to DRM simple panel driver.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
---
Changes in v3:
- No changes in general, added additional maintainers and also sending
to general kernel mailing list
---
drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 21939d4352cf..07433bff6c2b 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2008,6 +2008,32 @@ static const struct panel_desc edt_et057090dhu = {
.connector_type = DRM_MODE_CONNECTOR_DPI,
};
+static const struct drm_display_mode edt_etmv570g2dhu_mode = {
+ .clock = 25175,
+ .hdisplay = 640,
+ .hsync_start = 640,
+ .hsync_end = 640 + 16,
+ .htotal = 640 + 16 + 30 + 114,
+ .vdisplay = 480,
+ .vsync_start = 480 + 10,
+ .vsync_end = 480 + 10 + 3,
+ .vtotal = 480 + 10 + 3 + 35,
+ .flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
+};
+
+static const struct panel_desc edt_etmv570g2dhu = {
+ .modes = &edt_etmv570g2dhu_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 115,
+ .height = 86,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
static const struct drm_display_mode edt_etm0700g0dh6_mode = {
.clock = 33260,
.hdisplay = 800,
@@ -4338,6 +4364,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "edt,et057090dhu",
.data = &edt_et057090dhu,
+ }, {
+ .compatible = "edt,etmv570g2dhu",
+ .data = &edt_etmv570g2dhu,
}, {
.compatible = "edt,et070080dh6",
.data = &edt_etm0700g0dh6,
--
2.30.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v3 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
2021-07-06 7:59 [PATCH v3 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Yunus Bas
@ 2021-07-06 7:59 ` Yunus Bas
[not found] ` <YOiReNdogi3POjUS@ravnborg.org>
[not found] ` <YOiQo3B9JtE0kuO7@ravnborg.org>
1 sibling, 1 reply; 5+ messages in thread
From: Yunus Bas @ 2021-07-06 7:59 UTC (permalink / raw)
To: sam, laurent.pinchart, thierry.reding, dri-devel, linux-kernel
Cc: airlied, daniel
From: Stefan Riedmueller <s.riedmueller@phytec.de>
This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd
panel to DRM simple panel driver.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
---
Changes in v3:
- No changes in general, added additional maintainers and also sending
to general kernel mailing list
---
drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 07433bff6c2b..8aba473a7592 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1929,6 +1929,32 @@ static const struct panel_desc edt_et035012dm6 = {
.bus_flags = DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
};
+static const struct drm_display_mode edt_etm0350g0dh6_mode = {
+ .clock = 6520,
+ .hdisplay = 320,
+ .hsync_start = 320 + 20,
+ .hsync_end = 320 + 20 + 68,
+ .htotal = 320 + 20 + 68,
+ .vdisplay = 240,
+ .vsync_start = 240 + 4,
+ .vsync_end = 240 + 4 + 18,
+ .vtotal = 240 + 4 + 18,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc edt_etm0350g0dh6 = {
+ .modes = &edt_etm0350g0dh6_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 70,
+ .height = 53,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
static const struct drm_display_mode edt_etm043080dh6gp_mode = {
.clock = 10870,
.hdisplay = 480,
@@ -4355,6 +4381,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "edt,et035012dm6",
.data = &edt_et035012dm6,
+ }, {
+ .compatible = "edt,etm0350g0dh6",
+ .data = &edt_etm0350g0dh6,
}, {
.compatible = "edt,etm043080dh6gp",
.data = &edt_etm043080dh6gp,
--
2.30.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v3 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel
[not found] ` <YOiQo3B9JtE0kuO7@ravnborg.org>
@ 2021-07-09 18:56 ` Yunus Bas
0 siblings, 0 replies; 5+ messages in thread
From: Yunus Bas @ 2021-07-09 18:56 UTC (permalink / raw)
To: sam
Cc: dri-devel, daniel, laurent.pinchart, airlied, linux-kernel,
thierry.reding
Hi Sam,
Am Freitag, dem 09.07.2021 um 20:08 +0200 schrieb Sam Ravnborg:
> Hi Yunus,
>
> On Tue, Jul 06, 2021 at 09:59:07AM +0200, Yunus Bas wrote:
> > From: Stefan Riedmueller <s.riedmueller@phytec.de>
> >
> > This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd
> > panel
> > to DRM simple panel driver.
> >
> > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> > Signed-off-by: Yunus Bas <y.bas@phytec.de>
> > ---
> > Changes in v3:
> > - No changes in general, added additional maintainers and also
> > sending
> > to general kernel mailing list
> > ---
> > drivers/gpu/drm/panel/panel-simple.c | 29
> > ++++++++++++++++++++++++++++
> > 1 file changed, 29 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c
> > b/drivers/gpu/drm/panel/panel-simple.c
> > index 21939d4352cf..07433bff6c2b 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -2008,6 +2008,32 @@ static const struct panel_desc
> > edt_et057090dhu = {
> > .connector_type = DRM_MODE_CONNECTOR_DPI,
> > };
> >
> > +static const struct drm_display_mode edt_etmv570g2dhu_mode = {
> > + .clock = 25175,
> > + .hdisplay = 640,
> > + .hsync_start = 640,
> > + .hsync_end = 640 + 16,
> > + .htotal = 640 + 16 + 30 + 114,
> > + .vdisplay = 480,
> > + .vsync_start = 480 + 10,
> > + .vsync_end = 480 + 10 + 3,
> > + .vtotal = 480 + 10 + 3 + 35,
> > + .flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
> > +};
> > +
> > +static const struct panel_desc edt_etmv570g2dhu = {
> > + .modes = &edt_etmv570g2dhu_mode,
> > + .num_modes = 1,
> > + .bpc = 6,
> > + .size = {
> > + .width = 115,
> > + .height = 86,
> > + },
> > + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> > + .bus_flags = DRM_BUS_FLAG_DE_HIGH |
> > DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> > + .connector_type = DRM_MODE_CONNECTOR_DPI,
> > +};
> > +
> > static const struct drm_display_mode edt_etm0700g0dh6_mode = {
> > .clock = 33260,
> > .hdisplay = 800,
> > @@ -4338,6 +4364,9 @@ static const struct of_device_id
> > platform_of_match[] = {
> > }, {
> > .compatible = "edt,et057090dhu",
> > .data = &edt_et057090dhu,
> > + }, {
> > + .compatible = "edt,etmv570g2dhu",
> > + .data = &edt_etmv570g2dhu,
> > }, {
> > .compatible = "edt,et070080dh6",
> > .data = &edt_etm0700g0dh6,
>
> This list must be alphabetically sorted after compatible.
>
> "edt,etmv570g2dhu" comes after "edt,et070080dh6"
>
> The same order must be used where edt_etmv570g2dhu is defined.
> Sorry for this nit, but if we fails to follw it we will soon have
> chaos.
Of course, sorry for not noticing earlier. I will change this.
Regards, Yunus
>
> The rest looks good, everything needed is defined.
>
> Sam
--
Mit freundlichen Grüßen
Yunus Bas
-Software Engineer-
PHYTEC Messtechnik GmbH
Robert-Koch-Str. 39
55129 Mainz
Germany
Tel.: +49 (0)6131 9221- 466
Web: www.phytec.de
Sie finden uns auch auf: Facebook, LinkedIn, Xing, YouTube
PHYTEC Messtechnik GmbH | Robert-Koch-Str. 39 | 55129 Mainz, Germany
Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber |
Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE
149059855
This E-Mail may contain confidential or privileged information. If you
are not the intended recipient (or have received this E-Mail in error)
please notify the sender immediately and destroy this E-Mail. Any
unauthorized copying, disclosure or distribution of the material in
this E-Mail is strictly forbidden.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v3 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
[not found] ` <YOiReNdogi3POjUS@ravnborg.org>
@ 2021-07-09 19:02 ` Yunus Bas
[not found] ` <YOijuQoj0wV/MhWJ@ravnborg.org>
0 siblings, 1 reply; 5+ messages in thread
From: Yunus Bas @ 2021-07-09 19:02 UTC (permalink / raw)
To: sam
Cc: dri-devel, daniel, laurent.pinchart, airlied, linux-kernel,
thierry.reding
Hi Sam,
Am Freitag, dem 09.07.2021 um 20:12 +0200 schrieb Sam Ravnborg:
> Hi Yunus,
>
> On Tue, Jul 06, 2021 at 09:59:08AM +0200, Yunus Bas wrote:
> > From: Stefan Riedmueller <s.riedmueller@phytec.de>
> >
> > This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd
> > panel to DRM simple panel driver.
> >
> > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> > Signed-off-by: Yunus Bas <y.bas@phytec.de>
> > ---
> > Changes in v3:
> > - No changes in general, added additional maintainers and also
> > sending
> > to general kernel mailing list
> > ---
> > drivers/gpu/drm/panel/panel-simple.c | 29
> > ++++++++++++++++++++++++++++
> > 1 file changed, 29 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c
> > b/drivers/gpu/drm/panel/panel-simple.c
> > index 07433bff6c2b..8aba473a7592 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -1929,6 +1929,32 @@ static const struct panel_desc edt_et035012dm6
> > = {
> > .bus_flags = DRM_BUS_FLAG_DE_LOW |
> > DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
> > };
> >
> > +static const struct drm_display_mode edt_etm0350g0dh6_mode = {
> > + .clock = 6520,
> > + .hdisplay = 320,
> > + .hsync_start = 320 + 20,
> > + .hsync_end = 320 + 20 + 68,
> > + .htotal = 320 + 20 + 68,
> > + .vdisplay = 240,
> > + .vsync_start = 240 + 4,
> > + .vsync_end = 240 + 4 + 18,
> > + .vtotal = 240 + 4 + 18,
> > + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
> > +};
> > +
> > +static const struct panel_desc edt_etm0350g0dh6 = {
> > + .modes = &edt_etm0350g0dh6_mode,
> > + .num_modes = 1,
> > + .bpc = 6,
> > + .size = {
> > + .width = 70,
> > + .height = 53,
> > + },
> > + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> > + .bus_flags = DRM_BUS_FLAG_DE_HIGH |
> > DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> > + .connector_type = DRM_MODE_CONNECTOR_DPI,
> > +};
> > +
> > static const struct drm_display_mode edt_etm043080dh6gp_mode = {
> > .clock = 10870,
> > .hdisplay = 480,
> > @@ -4355,6 +4381,9 @@ static const struct of_device_id
> > platform_of_match[] = {
> > }, {
> > .compatible = "edt,et035012dm6",
> > .data = &edt_et035012dm6,
> > + }, {
> > + .compatible = "edt,etm0350g0dh6",
> > + .data = &edt_etm0350g0dh6,
>
> The compatible "edt,etm0350g0dh6" is not documented.
> You likely need to add it to panel-simple.yaml - and likewise for the
> first patch.
>
> dt people like binding patches in separate patches so add them both in
> one dedicated patch.
I've already sent devicetree patches. Here is the link:
https://lore.kernel.org/linux-devicetree/20210331181317.464926-1-y.bas@phytec.de/
It was just pending and waiting for these patches. Shall I send again?
Regards, Yunus
>
> Sam
--
Mit freundlichen Grüßen
Yunus Bas
-Software Engineer-
PHYTEC Messtechnik GmbH
Robert-Koch-Str. 39
55129 Mainz
Germany
Tel.: +49 (0)6131 9221- 466
Web: www.phytec.de
Sie finden uns auch auf: Facebook, LinkedIn, Xing, YouTube
PHYTEC Messtechnik GmbH | Robert-Koch-Str. 39 | 55129 Mainz, Germany
Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber |
Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE
149059855
This E-Mail may contain confidential or privileged information. If you
are not the intended recipient (or have received this E-Mail in error)
please notify the sender immediately and destroy this E-Mail. Any
unauthorized copying, disclosure or distribution of the material in
this E-Mail is strictly forbidden.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v3 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
[not found] ` <YOijuQoj0wV/MhWJ@ravnborg.org>
@ 2021-07-09 19:34 ` Yunus Bas
0 siblings, 0 replies; 5+ messages in thread
From: Yunus Bas @ 2021-07-09 19:34 UTC (permalink / raw)
To: sam
Cc: dri-devel, daniel, laurent.pinchart, airlied, linux-kernel,
thierry.reding
Am Freitag, dem 09.07.2021 um 21:30 +0200 schrieb Sam Ravnborg:
> Hi Yunus,
>
> On Fri, Jul 09, 2021 at 07:02:52PM +0000, Yunus Bas wrote:
> > Hi Sam,
> >
> > Am Freitag, dem 09.07.2021 um 20:12 +0200 schrieb Sam Ravnborg:
> > > Hi Yunus,
> > >
> > > On Tue, Jul 06, 2021 at 09:59:08AM +0200, Yunus Bas wrote:
> > > > From: Stefan Riedmueller <s.riedmueller@phytec.de>
> > > >
> > > > This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240)
> > > > lcd
> > > > panel to DRM simple panel driver.
> > > >
> > > > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> > > > Signed-off-by: Yunus Bas <y.bas@phytec.de>
> > > > ---
> > > > Changes in v3:
> > > > - No changes in general, added additional maintainers and also
> > > > sending
> > > > to general kernel mailing list
> > > > ---
> > > > drivers/gpu/drm/panel/panel-simple.c | 29
> > > > ++++++++++++++++++++++++++++
> > > > 1 file changed, 29 insertions(+)
> > > >
> > > > diff --git a/drivers/gpu/drm/panel/panel-simple.c
> > > > b/drivers/gpu/drm/panel/panel-simple.c
> > > > index 07433bff6c2b..8aba473a7592 100644
> > > > --- a/drivers/gpu/drm/panel/panel-simple.c
> > > > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > > > @@ -1929,6 +1929,32 @@ static const struct panel_desc
> > > > edt_et035012dm6
> > > > = {
> > > > .bus_flags = DRM_BUS_FLAG_DE_LOW |
> > > > DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
> > > > };
> > > >
> > > > +static const struct drm_display_mode edt_etm0350g0dh6_mode = {
> > > > + .clock = 6520,
> > > > + .hdisplay = 320,
> > > > + .hsync_start = 320 + 20,
> > > > + .hsync_end = 320 + 20 + 68,
> > > > + .htotal = 320 + 20 + 68,
> > > > + .vdisplay = 240,
> > > > + .vsync_start = 240 + 4,
> > > > + .vsync_end = 240 + 4 + 18,
> > > > + .vtotal = 240 + 4 + 18,
> > > > + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
> > > > +};
> > > > +
> > > > +static const struct panel_desc edt_etm0350g0dh6 = {
> > > > + .modes = &edt_etm0350g0dh6_mode,
> > > > + .num_modes = 1,
> > > > + .bpc = 6,
> > > > + .size = {
> > > > + .width = 70,
> > > > + .height = 53,
> > > > + },
> > > > + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> > > > + .bus_flags = DRM_BUS_FLAG_DE_HIGH |
> > > > DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> > > > + .connector_type = DRM_MODE_CONNECTOR_DPI,
> > > > +};
> > > > +
> > > > static const struct drm_display_mode edt_etm043080dh6gp_mode =
> > > > {
> > > > .clock = 10870,
> > > > .hdisplay = 480,
> > > > @@ -4355,6 +4381,9 @@ static const struct of_device_id
> > > > platform_of_match[] = {
> > > > }, {
> > > > .compatible = "edt,et035012dm6",
> > > > .data = &edt_et035012dm6,
> > > > + }, {
> > > > + .compatible = "edt,etm0350g0dh6",
> > > > + .data = &edt_etm0350g0dh6,
> > >
> > > The compatible "edt,etm0350g0dh6" is not documented.
> > > You likely need to add it to panel-simple.yaml - and likewise for
> > > the
> > > first patch.
> > >
> > > dt people like binding patches in separate patches so add them
> > > both in
> > > one dedicated patch.
> >
> > I've already sent devicetree patches. Here is the link:
> > https://lore.kernel.org/linux-devicetree/20210331181317.464926-1-y.bas@phytec.de/
> >
> > It was just pending and waiting for these patches. Shall I send
> > again?
> I have likely deleted the patches already, so please resend.
> Been mostly offline for a period and then one week wihtout access to
> my
> linux box, and have to delete a lot to avoid getting too much behind.
No problem, I'll resend them ASAP.
Regards, Yunus
>
> Sam
--
Mit freundlichen Grüßen
Yunus Bas
-Software Engineer-
PHYTEC Messtechnik GmbH
Robert-Koch-Str. 39
55129 Mainz
Germany
Tel.: +49 (0)6131 9221- 466
Web: www.phytec.de
Sie finden uns auch auf: Facebook, LinkedIn, Xing, YouTube
PHYTEC Messtechnik GmbH | Robert-Koch-Str. 39 | 55129 Mainz, Germany
Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber |
Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE
149059855
This E-Mail may contain confidential or privileged information. If you
are not the intended recipient (or have received this E-Mail in error)
please notify the sender immediately and destroy this E-Mail. Any
unauthorized copying, disclosure or distribution of the material in
this E-Mail is strictly forbidden.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-07-09 19:34 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-06 7:59 [PATCH v3 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Yunus Bas
2021-07-06 7:59 ` [PATCH v3 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel Yunus Bas
[not found] ` <YOiReNdogi3POjUS@ravnborg.org>
2021-07-09 19:02 ` Yunus Bas
[not found] ` <YOijuQoj0wV/MhWJ@ravnborg.org>
2021-07-09 19:34 ` Yunus Bas
[not found] ` <YOiQo3B9JtE0kuO7@ravnborg.org>
2021-07-09 18:56 ` [PATCH v3 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Yunus Bas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).