linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mesih Kilinc <mesihkilinc@gmail.com>
To: dmaengine@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org,
	linux-sunxi@googlegroups.com
Cc: Mesih Kilinc <mesihkilinc@gmail.com>,
	Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>, Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>
Subject: [RFC PATCH 06/10] ASoC: sun4i-codec: Add DMA Max Burst field
Date: Mon,  3 Dec 2018 00:23:13 +0300	[thread overview]
Message-ID: <b36cd894f89f572c44318e7999e7724b80ba857e.1543782328.git.mesihkilinc@gmail.com> (raw)
In-Reply-To: <cover.1543782328.git.mesihkilinc@gmail.com>

Allwinner suniv F1C100s has similar DMA engine to sun4i but it has
smaller max burst size compared to sun4i. Add a quirk field to
differantitate between them.

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 sound/soc/sunxi/sun4i-codec.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index 9a3cb77..7a9f84e 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -224,6 +224,8 @@
 
 /* TODO H3 DAP (Digital Audio Processing) bits */
 
+#define SUN4I_DMA_MAX_BURST			(8)
+
 struct sun4i_codec {
 	struct device	*dev;
 	struct regmap	*regmap;
@@ -1462,6 +1464,7 @@ struct sun4i_codec_quirks {
 	unsigned int reg_dac_txdata;	/* TX FIFO offset for DMA config */
 	unsigned int reg_adc_rxdata;	/* RX FIFO offset for DMA config */
 	bool has_reset;
+	u32 dma_max_burst;
 };
 
 static const struct sun4i_codec_quirks sun4i_codec_quirks = {
@@ -1471,6 +1474,7 @@ static const struct sun4i_codec_quirks sun4i_codec_quirks = {
 	.reg_adc_fifoc	= REG_FIELD(SUN4I_CODEC_ADC_FIFOC, 0, 31),
 	.reg_dac_txdata	= SUN4I_CODEC_DAC_TXDATA,
 	.reg_adc_rxdata	= SUN4I_CODEC_ADC_RXDATA,
+	.dma_max_burst	= SUN4I_DMA_MAX_BURST,
 };
 
 static const struct sun4i_codec_quirks sun6i_a31_codec_quirks = {
@@ -1481,6 +1485,7 @@ static const struct sun4i_codec_quirks sun6i_a31_codec_quirks = {
 	.reg_dac_txdata	= SUN4I_CODEC_DAC_TXDATA,
 	.reg_adc_rxdata	= SUN6I_CODEC_ADC_RXDATA,
 	.has_reset	= true,
+	.dma_max_burst	= SUN4I_DMA_MAX_BURST,
 };
 
 static const struct sun4i_codec_quirks sun7i_codec_quirks = {
@@ -1490,6 +1495,7 @@ static const struct sun4i_codec_quirks sun7i_codec_quirks = {
 	.reg_adc_fifoc	= REG_FIELD(SUN4I_CODEC_ADC_FIFOC, 0, 31),
 	.reg_dac_txdata	= SUN4I_CODEC_DAC_TXDATA,
 	.reg_adc_rxdata	= SUN4I_CODEC_ADC_RXDATA,
+	.dma_max_burst	= SUN4I_DMA_MAX_BURST,
 };
 
 static const struct sun4i_codec_quirks sun8i_a23_codec_quirks = {
@@ -1500,6 +1506,7 @@ static const struct sun4i_codec_quirks sun8i_a23_codec_quirks = {
 	.reg_dac_txdata	= SUN4I_CODEC_DAC_TXDATA,
 	.reg_adc_rxdata	= SUN6I_CODEC_ADC_RXDATA,
 	.has_reset	= true,
+	.dma_max_burst	= SUN4I_DMA_MAX_BURST,
 };
 
 static const struct sun4i_codec_quirks sun8i_h3_codec_quirks = {
@@ -1515,6 +1522,7 @@ static const struct sun4i_codec_quirks sun8i_h3_codec_quirks = {
 	.reg_dac_txdata	= SUN8I_H3_CODEC_DAC_TXDATA,
 	.reg_adc_rxdata	= SUN6I_CODEC_ADC_RXDATA,
 	.has_reset	= true,
+	.dma_max_burst	= SUN4I_DMA_MAX_BURST,
 };
 
 static const struct sun4i_codec_quirks sun8i_v3s_codec_quirks = {
@@ -1529,6 +1537,7 @@ static const struct sun4i_codec_quirks sun8i_v3s_codec_quirks = {
 	.reg_dac_txdata	= SUN8I_H3_CODEC_DAC_TXDATA,
 	.reg_adc_rxdata	= SUN6I_CODEC_ADC_RXDATA,
 	.has_reset	= true,
+	.dma_max_burst	= SUN4I_DMA_MAX_BURST,
 };
 
 static const struct of_device_id sun4i_codec_of_match[] = {
@@ -1655,12 +1664,12 @@ static int sun4i_codec_probe(struct platform_device *pdev)
 
 	/* DMA configuration for TX FIFO */
 	scodec->playback_dma_data.addr = res->start + quirks->reg_dac_txdata;
-	scodec->playback_dma_data.maxburst = 8;
+	scodec->playback_dma_data.maxburst = quirks->dma_max_burst;
 	scodec->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 
 	/* DMA configuration for RX FIFO */
 	scodec->capture_dma_data.addr = res->start + quirks->reg_adc_rxdata;
-	scodec->capture_dma_data.maxburst = 8;
+	scodec->capture_dma_data.maxburst = quirks->dma_max_burst;
 	scodec->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 
 	ret = devm_snd_soc_register_component(&pdev->dev, quirks->codec,
-- 
2.7.4


  parent reply	other threads:[~2018-12-02 21:23 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-02 21:23 [RFC PATCH 00/10] Add support for DMA and audio codec of F1C100s Mesih Kilinc
2018-12-02 21:23 ` [RFC PATCH 01/10] dma-engine: sun4i: Add a quirk to support different chips Mesih Kilinc
2018-12-03 10:54   ` Maxime Ripard
2019-01-04 15:38   ` Vinod Koul
2018-12-02 21:23 ` [RFC PATCH 02/10] dma-engine: sun4i: Add has_reset option to quirk Mesih Kilinc
2018-12-02 21:23 ` [RFC PATCH 03/10] dt-bindings: dmaengine: Add Allwinner suniv F1C100s DMA Mesih Kilinc
2018-12-19 14:03   ` Rob Herring
2018-12-02 21:23 ` [RFC PATCH 04/10] dma-engine: sun4i: Add support for Allwinner suniv F1C100s Mesih Kilinc
2018-12-03 10:56   ` Maxime Ripard
2018-12-03 11:00   ` Maxime Ripard
2018-12-02 21:23 ` [RFC PATCH 05/10] ARM: dts: suniv: f1c100s: Add support for DMA Mesih Kilinc
2018-12-02 21:23 ` Mesih Kilinc [this message]
2018-12-02 21:23 ` [RFC PATCH 07/10] dt-bindigs: sound: Add Allwinner suniv F1C100s Audio Codec Mesih Kilinc
2018-12-19 14:04   ` Rob Herring
2018-12-02 21:23 ` [RFC PATCH 08/10] ASoC: sun4i-codec: Add support for Allwinner suniv F1C100s Mesih Kilinc
2018-12-02 21:23 ` [RFC PATCH 09/10] ARM: dts: suniv: f1c100s: Add support for Audio Codec Mesih Kilinc
2018-12-02 21:23 ` [RFC PATCH 10/10] ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano Mesih Kilinc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b36cd894f89f572c44318e7999e7724b80ba857e.1543782328.git.mesihkilinc@gmail.com \
    --to=mesihkilinc@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    --cc=vkoul@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).