[PATCH v5] x86: Avoid relocation information in final vmlinux

[PATCH v5] x86: Avoid relocation information in final vmlinux

[Petr Pavlu]

The Linux build process on x86 roughly consists of compiling all input
files, statically linking them into a vmlinux ELF file, and then taking
and turning this file into an actual bzImage bootable file.

vmlinux has in this process two main purposes:
1) It is an intermediate build target on the way to produce the final
   bootable image.
2) It is a file that is expected to be used by debuggers and standard
   ELF tooling to work with the built kernel.

For the second purpose, a vmlinux file is typically collected by various
package build recipes, such as distribution spec files, including the
kernel's own tar-pkg target.

When building a kernel supporting KASLR with CONFIG_X86_NEED_RELOCS,
vmlinux contains also relocation information produced by using the
--emit-relocs linker option. This is utilized by subsequent build steps
to create vmlinux.relocs and produce a relocatable image. However, the
information is not needed by debuggers and other standard ELF tooling.

The issue is then that the collected vmlinux file and hence distribution
packages end up unnecessarily large because of this extra data. The
following is a size comparison of vmlinux v6.0 with and without the
relocation information:
| Configuration      | With relocs | Stripped relocs |
| x86_64_defconfig   |       70 MB |           43 MB |
| +CONFIG_DEBUG_INFO |      818 MB |          367 MB |

Optimize a resulting vmlinux by adding a postlink step that splits the
relocation information into vmlinux.relocs and then strips it from the
vmlinux binary.

Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
---

Changes since v4 [1]:
- Update the example target which is mentioned in the patch description
  to collect vmlinux from binrpm-pkg to tar-pkg, to reflect fc8c2d8ff206
  ("kbuild: Stop including vmlinux.bz2 in the rpm's").

Changes since v3 [2]:
- Update the Kbuild.include path in arch/x86/Makefile.postlink to work
  after 67d7c3023a67 ("kbuild: remove --include-dir MAKEFLAG from top
  Makefile").

Changes since v2 [3]:
- Ignore only the moved vmlinux.relocs, add it to .gitignore and
  Documentation/dontdiff.
- Clean up the patch description.

Changes since v1 [4]:
- Fix the command to remove relocations to work with llvm-objcopy too.

[1] https://lore.kernel.org/lkml/20230227131829.26824-1-petr.pavlu@suse.com/
[2] https://lore.kernel.org/lkml/20221211141227.7622-1-petr.pavlu@suse.com/
[3] https://lore.kernel.org/lkml/20220927084632.14531-1-petr.pavlu@suse.com/
[4] https://lore.kernel.org/lkml/20220913132911.6850-1-petr.pavlu@suse.com/

 .gitignore                          |  1 +
 Documentation/dontdiff              |  1 +
 arch/x86/Makefile.postlink          | 41 +++++++++++++++++++++++++++++
 arch/x86/boot/compressed/.gitignore |  1 -
 arch/x86/boot/compressed/Makefile   | 10 +++----
 5 files changed, 47 insertions(+), 7 deletions(-)
 create mode 100644 arch/x86/Makefile.postlink

diff --git a/.gitignore b/.gitignore
index 70ec6037fa7a..9bafd3c6bb5f 100644
--- a/.gitignore
+++ b/.gitignore
@@ -65,6 +65,7 @@ modules.order
 /vmlinux
 /vmlinux.32
 /vmlinux.map
+/vmlinux.relocs
 /vmlinux.symvers
 /vmlinux-gdb.py
 /vmlinuz
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index 3c399f132e2d..a62ad01e6d11 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -254,6 +254,7 @@ vmlinux.aout
 vmlinux.bin.all
 vmlinux.lds
 vmlinux.map
+vmlinux.relocs
 vmlinux.symvers
 vmlinuz
 voffset.h
diff --git a/arch/x86/Makefile.postlink b/arch/x86/Makefile.postlink
new file mode 100644
index 000000000000..195af937aa4d
--- /dev/null
+++ b/arch/x86/Makefile.postlink
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+# ===========================================================================
+# Post-link x86 pass
+# ===========================================================================
+#
+# 1. Separate relocations from vmlinux into vmlinux.relocs.
+# 2. Strip relocations from vmlinux.
+
+PHONY := __archpost
+__archpost:
+
+-include include/config/auto.conf
+include $(srctree)/scripts/Kbuild.include
+
+CMD_RELOCS = arch/x86/tools/relocs
+quiet_cmd_relocs = RELOCS  $@.relocs
+      cmd_relocs = $(CMD_RELOCS) $@ > $@.relocs;$(CMD_RELOCS) --abs-relocs $@
+
+quiet_cmd_strip_relocs = RSTRIP  $@
+      cmd_strip_relocs = $(OBJCOPY) --remove-section='.rel.*' --remove-section='.rel__*' --remove-section='.rela.*' --remove-section='.rela__*' $@
+
+# `@true` prevents complaint when there is nothing to be done
+
+vmlinux: FORCE
+	@true
+ifeq ($(CONFIG_X86_NEED_RELOCS),y)
+	$(call cmd,relocs)
+	$(call cmd,strip_relocs)
+endif
+
+%.ko: FORCE
+	@true
+
+clean:
+	@rm -f vmlinux.relocs
+
+PHONY += FORCE clean
+
+FORCE:
+
+.PHONY: $(PHONY)
diff --git a/arch/x86/boot/compressed/.gitignore b/arch/x86/boot/compressed/.gitignore
index 25805199a506..b2968175fc27 100644
--- a/arch/x86/boot/compressed/.gitignore
+++ b/arch/x86/boot/compressed/.gitignore
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 relocs
 vmlinux.bin.all
-vmlinux.relocs
 vmlinux.lds
 mkpiggy
 piggy.S
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 6b6cfe607bdb..19d1fb601796 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -121,14 +121,12 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 
 targets += $(patsubst $(obj)/%,%,$(vmlinux-objs-y)) vmlinux.bin.all vmlinux.relocs
 
-CMD_RELOCS = arch/x86/tools/relocs
-quiet_cmd_relocs = RELOCS  $@
-      cmd_relocs = $(CMD_RELOCS) $< > $@;$(CMD_RELOCS) --abs-relocs $<
-$(obj)/vmlinux.relocs: vmlinux FORCE
-	$(call if_changed,relocs)
+# vmlinux.relocs is created by the vmlinux postlink step.
+vmlinux.relocs: vmlinux
+	@true
 
 vmlinux.bin.all-y := $(obj)/vmlinux.bin
-vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs
+vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += vmlinux.relocs
 
 $(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,gzip)
-- 
2.35.3

Re: [PATCH v5] x86: Avoid relocation information in final vmlinux

[Nick Desaulniers]

On Mon, Mar 20, 2023 at 5:10 AM Petr Pavlu <petr.pavlu@suse.com> wrote:
>
> The Linux build process on x86 roughly consists of compiling all input
> files, statically linking them into a vmlinux ELF file, and then taking
> and turning this file into an actual bzImage bootable file.
>
> vmlinux has in this process two main purposes:
> 1) It is an intermediate build target on the way to produce the final
>    bootable image.
> 2) It is a file that is expected to be used by debuggers and standard
>    ELF tooling to work with the built kernel.
>
> For the second purpose, a vmlinux file is typically collected by various
> package build recipes, such as distribution spec files, including the
> kernel's own tar-pkg target.
>
> When building a kernel supporting KASLR with CONFIG_X86_NEED_RELOCS,
> vmlinux contains also relocation information produced by using the
> --emit-relocs linker option. This is utilized by subsequent build steps
> to create vmlinux.relocs and produce a relocatable image. However, the
> information is not needed by debuggers and other standard ELF tooling.
>
> The issue is then that the collected vmlinux file and hence distribution
> packages end up unnecessarily large because of this extra data. The
> following is a size comparison of vmlinux v6.0 with and without the
> relocation information:
> | Configuration      | With relocs | Stripped relocs |
> | x86_64_defconfig   |       70 MB |           43 MB |
> | +CONFIG_DEBUG_INFO |      818 MB |          367 MB |

Thanks for getting this to work with llvm-objcopy.  It's a pretty big
win for us, especially for thin-lto builds which produce a ridiculous
amount of debug info duplication (something I'm petitioning our DWARF
folks to look into for DWARFv6) some measurements (all LLVM=1):

Before this patch:
defconfig:
76M vmlinux
DEBUG_INFO:
510M vmlinux
DEBUG_INFO+LTO_CLANG_THIN:
796M vmlinux

after:
defconfig:
48M vmlinux (-36.8%)
DEBUG_INFO:
270M vmlinux (-47%)
LTO_CLANG_THIN:
400M vmlinux (-49.8%)

So basically a 50% reduction in vmlinux size, depending on the precise
configs selected. That's pretty great!

Android usually keeps around vmlinux artifacts as well as the
compressed image in case we need to debug the image later, this should
help us cut our storage costs for those quite a bit.  arm64 is more
common for Android, but x86_64 is pretty helpful for a virtualized
target; we do use it alot for first party development.

I also tested that I could still boot the result in QEMU, attach GDB,
and still hit breakpoints in the resulting vmlinux.  I also tested
that there were no more rel/rela sections missed in the resulting
vmlinux images.

Tested-by: Nick Desaulniers <ndesaulniers@google.com>

Some minor review comments below.


I do also wonder if linkers have something like --emit-relocs, but the
option to produce it in an additional file. That would help us avoid
producing it only to split it out in the first place.

>
> Optimize a resulting vmlinux by adding a postlink step that splits the
> relocation information into vmlinux.relocs and then strips it from the
> vmlinux binary.
>
> Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
> ---
>
> Changes since v4 [1]:
> - Update the example target which is mentioned in the patch description
>   to collect vmlinux from binrpm-pkg to tar-pkg, to reflect fc8c2d8ff206
>   ("kbuild: Stop including vmlinux.bz2 in the rpm's").
>
> Changes since v3 [2]:
> - Update the Kbuild.include path in arch/x86/Makefile.postlink to work
>   after 67d7c3023a67 ("kbuild: remove --include-dir MAKEFLAG from top
>   Makefile").
>
> Changes since v2 [3]:
> - Ignore only the moved vmlinux.relocs, add it to .gitignore and
>   Documentation/dontdiff.
> - Clean up the patch description.
>
> Changes since v1 [4]:
> - Fix the command to remove relocations to work with llvm-objcopy too.
>
> [1] https://lore.kernel.org/lkml/20230227131829.26824-1-petr.pavlu@suse.com/
> [2] https://lore.kernel.org/lkml/20221211141227.7622-1-petr.pavlu@suse.com/
> [3] https://lore.kernel.org/lkml/20220927084632.14531-1-petr.pavlu@suse.com/
> [4] https://lore.kernel.org/lkml/20220913132911.6850-1-petr.pavlu@suse.com/
>
>  .gitignore                          |  1 +
>  Documentation/dontdiff              |  1 +
>  arch/x86/Makefile.postlink          | 41 +++++++++++++++++++++++++++++
>  arch/x86/boot/compressed/.gitignore |  1 -
>  arch/x86/boot/compressed/Makefile   | 10 +++----
>  5 files changed, 47 insertions(+), 7 deletions(-)
>  create mode 100644 arch/x86/Makefile.postlink
>
> diff --git a/.gitignore b/.gitignore
> index 70ec6037fa7a..9bafd3c6bb5f 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -65,6 +65,7 @@ modules.order
>  /vmlinux
>  /vmlinux.32
>  /vmlinux.map
> +/vmlinux.relocs

Why do you move this from the arch/x86/boot/compressed/ dir?

>  /vmlinux.symvers
>  /vmlinux-gdb.py
>  /vmlinuz
> diff --git a/Documentation/dontdiff b/Documentation/dontdiff
> index 3c399f132e2d..a62ad01e6d11 100644
> --- a/Documentation/dontdiff
> +++ b/Documentation/dontdiff
> @@ -254,6 +254,7 @@ vmlinux.aout
>  vmlinux.bin.all
>  vmlinux.lds
>  vmlinux.map
> +vmlinux.relocs
>  vmlinux.symvers
>  vmlinuz
>  voffset.h
> diff --git a/arch/x86/Makefile.postlink b/arch/x86/Makefile.postlink
> new file mode 100644
> index 000000000000..195af937aa4d
> --- /dev/null
> +++ b/arch/x86/Makefile.postlink
> @@ -0,0 +1,41 @@
> +# SPDX-License-Identifier: GPL-2.0
> +# ===========================================================================
> +# Post-link x86 pass
> +# ===========================================================================
> +#
> +# 1. Separate relocations from vmlinux into vmlinux.relocs.
> +# 2. Strip relocations from vmlinux.
> +
> +PHONY := __archpost
> +__archpost:
> +
> +-include include/config/auto.conf
> +include $(srctree)/scripts/Kbuild.include
> +
> +CMD_RELOCS = arch/x86/tools/relocs
> +quiet_cmd_relocs = RELOCS  $@.relocs
> +      cmd_relocs = $(CMD_RELOCS) $@ > $@.relocs;$(CMD_RELOCS) --abs-relocs $@
> +
> +quiet_cmd_strip_relocs = RSTRIP  $@
> +      cmd_strip_relocs = $(OBJCOPY) --remove-section='.rel.*' --remove-section='.rel__*' --remove-section='.rela.*' --remove-section='.rela__*' $@

This line is pretty long (146 chars), can you use \ here to wrap it?

> +
> +# `@true` prevents complaint when there is nothing to be done
> +
> +vmlinux: FORCE
> +       @true
> +ifeq ($(CONFIG_X86_NEED_RELOCS),y)
> +       $(call cmd,relocs)
> +       $(call cmd,strip_relocs)
> +endif
> +
> +%.ko: FORCE
> +       @true
> +
> +clean:
> +       @rm -f vmlinux.relocs
> +
> +PHONY += FORCE clean
> +
> +FORCE:
> +
> +.PHONY: $(PHONY)
> diff --git a/arch/x86/boot/compressed/.gitignore b/arch/x86/boot/compressed/.gitignore
> index 25805199a506..b2968175fc27 100644
> --- a/arch/x86/boot/compressed/.gitignore
> +++ b/arch/x86/boot/compressed/.gitignore
> @@ -1,7 +1,6 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  relocs
>  vmlinux.bin.all
> -vmlinux.relocs
>  vmlinux.lds
>  mkpiggy
>  piggy.S
> diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
> index 6b6cfe607bdb..19d1fb601796 100644
> --- a/arch/x86/boot/compressed/Makefile
> +++ b/arch/x86/boot/compressed/Makefile
> @@ -121,14 +121,12 @@ $(obj)/vmlinux.bin: vmlinux FORCE
>
>  targets += $(patsubst $(obj)/%,%,$(vmlinux-objs-y)) vmlinux.bin.all vmlinux.relocs
>
> -CMD_RELOCS = arch/x86/tools/relocs
> -quiet_cmd_relocs = RELOCS  $@
> -      cmd_relocs = $(CMD_RELOCS) $< > $@;$(CMD_RELOCS) --abs-relocs $<
> -$(obj)/vmlinux.relocs: vmlinux FORCE
> -       $(call if_changed,relocs)
> +# vmlinux.relocs is created by the vmlinux postlink step.
> +vmlinux.relocs: vmlinux
> +       @true
>
>  vmlinux.bin.all-y := $(obj)/vmlinux.bin
> -vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs
> +vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += vmlinux.relocs

Why do you remove $(obj) here? I'm guessing that's why you moved
vmlinux.relocs between .gitignore files?

>
>  $(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
>         $(call if_changed,gzip)
> --
> 2.35.3
>


-- 
Thanks,
~Nick Desaulniers

Re: [PATCH v5] x86: Avoid relocation information in final vmlinux

[Borislav Petkov]

On Mon, Mar 20, 2023 at 11:35:30AM -0700, Nick Desaulniers wrote:
> Why do you move this from the arch/x86/boot/compressed/ dir?

I got an explanation here:

https://lore.kernel.org/r/16941b45-0f4f-e7c9-4602-d9acb0c612c3@suse.com

but my counterargument is:

vmlinux.relocs is used there, in that dir, so it should stay there just
like the rest of the by-products generated there.

Thx.

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

Re: [PATCH v5] x86: Avoid relocation information in final vmlinux

[Petr Pavlu]

On 3/21/23 12:57, Borislav Petkov wrote:
> On Mon, Mar 20, 2023 at 11:35:30AM -0700, Nick Desaulniers wrote:
>> Why do you move this from the arch/x86/boot/compressed/ dir?
> 
> I got an explanation here:
> 
> https://lore.kernel.org/r/16941b45-0f4f-e7c9-4602-d9acb0c612c3@suse.com
> 
> but my counterargument is:
> 
> vmlinux.relocs is used there, in that dir, so it should stay there just
> like the rest of the by-products generated there.

Ok, I can see this argument. I will update it and post a new version.

Thanks,
Petr

Re: [PATCH v5] x86: Avoid relocation information in final vmlinux

[Petr Pavlu]

On 3/20/23 19:35, Nick Desaulniers wrote:
> On Mon, Mar 20, 2023 at 5:10 AM Petr Pavlu <petr.pavlu@suse.com> wrote:
>>
>> The Linux build process on x86 roughly consists of compiling all input
>> files, statically linking them into a vmlinux ELF file, and then taking
>> and turning this file into an actual bzImage bootable file.
>>
>> vmlinux has in this process two main purposes:
>> 1) It is an intermediate build target on the way to produce the final
>>    bootable image.
>> 2) It is a file that is expected to be used by debuggers and standard
>>    ELF tooling to work with the built kernel.
>>
>> For the second purpose, a vmlinux file is typically collected by various
>> package build recipes, such as distribution spec files, including the
>> kernel's own tar-pkg target.
>>
>> When building a kernel supporting KASLR with CONFIG_X86_NEED_RELOCS,
>> vmlinux contains also relocation information produced by using the
>> --emit-relocs linker option. This is utilized by subsequent build steps
>> to create vmlinux.relocs and produce a relocatable image. However, the
>> information is not needed by debuggers and other standard ELF tooling.
>>
>> The issue is then that the collected vmlinux file and hence distribution
>> packages end up unnecessarily large because of this extra data. The
>> following is a size comparison of vmlinux v6.0 with and without the
>> relocation information:
>> | Configuration      | With relocs | Stripped relocs |
>> | x86_64_defconfig   |       70 MB |           43 MB |
>> | +CONFIG_DEBUG_INFO |      818 MB |          367 MB |
> 
> Thanks for getting this to work with llvm-objcopy.  It's a pretty big
> win for us, especially for thin-lto builds which produce a ridiculous
> amount of debug info duplication (something I'm petitioning our DWARF
> folks to look into for DWARFv6) some measurements (all LLVM=1):
> 
> Before this patch:
> defconfig:
> 76M vmlinux
> DEBUG_INFO:
> 510M vmlinux
> DEBUG_INFO+LTO_CLANG_THIN:
> 796M vmlinux
> 
> after:
> defconfig:
> 48M vmlinux (-36.8%)
> DEBUG_INFO:
> 270M vmlinux (-47%)
> LTO_CLANG_THIN:
> 400M vmlinux (-49.8%)
> 
> So basically a 50% reduction in vmlinux size, depending on the precise
> configs selected. That's pretty great!
> 
> Android usually keeps around vmlinux artifacts as well as the
> compressed image in case we need to debug the image later, this should
> help us cut our storage costs for those quite a bit.  arm64 is more
> common for Android, but x86_64 is pretty helpful for a virtualized
> target; we do use it alot for first party development.
> 
> I also tested that I could still boot the result in QEMU, attach GDB,
> and still hit breakpoints in the resulting vmlinux.  I also tested
> that there were no more rel/rela sections missed in the resulting
> vmlinux images.
> 
> Tested-by: Nick Desaulniers <ndesaulniers@google.com>

Thanks for testing this change.

> 
> Some minor review comments below.
> 
> 
> I do also wonder if linkers have something like --emit-relocs, but the
> option to produce it in an additional file. That would help us avoid
> producing it only to split it out in the first place.

I'm afraid I'm not aware of such an option.

> 
>>
>> Optimize a resulting vmlinux by adding a postlink step that splits the
>> relocation information into vmlinux.relocs and then strips it from the
>> vmlinux binary.
>>
>> Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
>> ---
>>
>> Changes since v4 [1]:
>> - Update the example target which is mentioned in the patch description
>>   to collect vmlinux from binrpm-pkg to tar-pkg, to reflect fc8c2d8ff206
>>   ("kbuild: Stop including vmlinux.bz2 in the rpm's").
>>
>> Changes since v3 [2]:
>> - Update the Kbuild.include path in arch/x86/Makefile.postlink to work
>>   after 67d7c3023a67 ("kbuild: remove --include-dir MAKEFLAG from top
>>   Makefile").
>>
>> Changes since v2 [3]:
>> - Ignore only the moved vmlinux.relocs, add it to .gitignore and
>>   Documentation/dontdiff.
>> - Clean up the patch description.
>>
>> Changes since v1 [4]:
>> - Fix the command to remove relocations to work with llvm-objcopy too.
>>
>> [1] https://lore.kernel.org/lkml/20230227131829.26824-1-petr.pavlu@suse.com/
>> [2] https://lore.kernel.org/lkml/20221211141227.7622-1-petr.pavlu@suse.com/
>> [3] https://lore.kernel.org/lkml/20220927084632.14531-1-petr.pavlu@suse.com/
>> [4] https://lore.kernel.org/lkml/20220913132911.6850-1-petr.pavlu@suse.com/
>>
>>  .gitignore                          |  1 +
>>  Documentation/dontdiff              |  1 +
>>  arch/x86/Makefile.postlink          | 41 +++++++++++++++++++++++++++++
>>  arch/x86/boot/compressed/.gitignore |  1 -
>>  arch/x86/boot/compressed/Makefile   | 10 +++----
>>  5 files changed, 47 insertions(+), 7 deletions(-)
>>  create mode 100644 arch/x86/Makefile.postlink
>>
>> diff --git a/.gitignore b/.gitignore
>> index 70ec6037fa7a..9bafd3c6bb5f 100644
>> --- a/.gitignore
>> +++ b/.gitignore
>> @@ -65,6 +65,7 @@ modules.order
>>  /vmlinux
>>  /vmlinux.32
>>  /vmlinux.map
>> +/vmlinux.relocs
> 
> Why do you move this from the arch/x86/boot/compressed/ dir?

The idea was for Makefile.postlink to produce its output at own $(obj) level
which is essentially the top objtree directory. However, I can see the
argument to write vmlinux.relocs in the same directory where other related
output files are present.

> 
>>  /vmlinux.symvers
>>  /vmlinux-gdb.py
>>  /vmlinuz
>> diff --git a/Documentation/dontdiff b/Documentation/dontdiff
>> index 3c399f132e2d..a62ad01e6d11 100644
>> --- a/Documentation/dontdiff
>> +++ b/Documentation/dontdiff
>> @@ -254,6 +254,7 @@ vmlinux.aout
>>  vmlinux.bin.all
>>  vmlinux.lds
>>  vmlinux.map
>> +vmlinux.relocs
>>  vmlinux.symvers
>>  vmlinuz
>>  voffset.h
>> diff --git a/arch/x86/Makefile.postlink b/arch/x86/Makefile.postlink
>> new file mode 100644
>> index 000000000000..195af937aa4d
>> --- /dev/null
>> +++ b/arch/x86/Makefile.postlink
>> @@ -0,0 +1,41 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +# ===========================================================================
>> +# Post-link x86 pass
>> +# ===========================================================================
>> +#
>> +# 1. Separate relocations from vmlinux into vmlinux.relocs.
>> +# 2. Strip relocations from vmlinux.
>> +
>> +PHONY := __archpost
>> +__archpost:
>> +
>> +-include include/config/auto.conf
>> +include $(srctree)/scripts/Kbuild.include
>> +
>> +CMD_RELOCS = arch/x86/tools/relocs
>> +quiet_cmd_relocs = RELOCS  $@.relocs
>> +      cmd_relocs = $(CMD_RELOCS) $@ > $@.relocs;$(CMD_RELOCS) --abs-relocs $@
>> +
>> +quiet_cmd_strip_relocs = RSTRIP  $@
>> +      cmd_strip_relocs = $(OBJCOPY) --remove-section='.rel.*' --remove-section='.rel__*' --remove-section='.rela.*' --remove-section='.rela__*' $@
> 
> This line is pretty long (146 chars), can you use \ here to wrap it?

Ack, I'll wrap it in a new version.

>> +
>> +# `@true` prevents complaint when there is nothing to be done
>> +
>> +vmlinux: FORCE
>> +       @true
>> +ifeq ($(CONFIG_X86_NEED_RELOCS),y)
>> +       $(call cmd,relocs)
>> +       $(call cmd,strip_relocs)
>> +endif
>> +
>> +%.ko: FORCE
>> +       @true
>> +
>> +clean:
>> +       @rm -f vmlinux.relocs
>> +
>> +PHONY += FORCE clean
>> +
>> +FORCE:
>> +
>> +.PHONY: $(PHONY)
>> diff --git a/arch/x86/boot/compressed/.gitignore b/arch/x86/boot/compressed/.gitignore
>> index 25805199a506..b2968175fc27 100644
>> --- a/arch/x86/boot/compressed/.gitignore
>> +++ b/arch/x86/boot/compressed/.gitignore
>> @@ -1,7 +1,6 @@
>>  # SPDX-License-Identifier: GPL-2.0-only
>>  relocs
>>  vmlinux.bin.all
>> -vmlinux.relocs
>>  vmlinux.lds
>>  mkpiggy
>>  piggy.S
>> diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
>> index 6b6cfe607bdb..19d1fb601796 100644
>> --- a/arch/x86/boot/compressed/Makefile
>> +++ b/arch/x86/boot/compressed/Makefile
>> @@ -121,14 +121,12 @@ $(obj)/vmlinux.bin: vmlinux FORCE
>>
>>  targets += $(patsubst $(obj)/%,%,$(vmlinux-objs-y)) vmlinux.bin.all vmlinux.relocs
>>
>> -CMD_RELOCS = arch/x86/tools/relocs
>> -quiet_cmd_relocs = RELOCS  $@
>> -      cmd_relocs = $(CMD_RELOCS) $< > $@;$(CMD_RELOCS) --abs-relocs $<
>> -$(obj)/vmlinux.relocs: vmlinux FORCE
>> -       $(call if_changed,relocs)
>> +# vmlinux.relocs is created by the vmlinux postlink step.
>> +vmlinux.relocs: vmlinux
>> +       @true
>>
>>  vmlinux.bin.all-y := $(obj)/vmlinux.bin
>> -vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs
>> +vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += vmlinux.relocs
> 
> Why do you remove $(obj) here? I'm guessing that's why you moved
> vmlinux.relocs between .gitignore files?

Yes, it is because this version of Makefile.postlink saves vmlinux.relocs in
the top objtree directory.

Thanks,
Petr

Re: [PATCH v5] x86: Avoid relocation information in final vmlinux

[Dave Hansen]

On 3/20/23 05:10, Petr Pavlu wrote:
> The issue is then that the collected vmlinux file and hence distribution
> packages end up unnecessarily large because of this extra data. The
> following is a size comparison of vmlinux v6.0 with and without the
> relocation information:
> | Configuration      | With relocs | Stripped relocs |
> | x86_64_defconfig   |       70 MB |           43 MB |
> | +CONFIG_DEBUG_INFO |      818 MB |          367 MB |
> 
> Optimize a resulting vmlinux by adding a postlink step that splits the
> relocation information into vmlinux.relocs and then strips it from the
> vmlinux binary.

When I saw that this adds a postlink step, I read that as, "adds another
step to the unbearably slow single-threaded part of kernel builds". :)

But, here's one data point that made me feel a lot better.  Using a
random .config:

> https://sr71.net/~dave/intel/config-reloctest

the builds get a _bit_ slower, going from 37.0s->37.7s.  This is pretty
arbitrary of course, using my compiler on my hardware, so YMMV.  But,
for me, this seems like a reasonable tradeoff given the space savings.

I'd be curious what other people are seeing.

Re: [PATCH v5] x86: Avoid relocation information in final vmlinux

[Nathan Chancellor]

On Mon, Mar 20, 2023 at 01:12:07PM -0700, Dave Hansen wrote:
> On 3/20/23 05:10, Petr Pavlu wrote:
> > The issue is then that the collected vmlinux file and hence distribution
> > packages end up unnecessarily large because of this extra data. The
> > following is a size comparison of vmlinux v6.0 with and without the
> > relocation information:
> > | Configuration      | With relocs | Stripped relocs |
> > | x86_64_defconfig   |       70 MB |           43 MB |
> > | +CONFIG_DEBUG_INFO |      818 MB |          367 MB |
> > 
> > Optimize a resulting vmlinux by adding a postlink step that splits the
> > relocation information into vmlinux.relocs and then strips it from the
> > vmlinux binary.
> 
> When I saw that this adds a postlink step, I read that as, "adds another
> step to the unbearably slow single-threaded part of kernel builds". :)
> 
> But, here's one data point that made me feel a lot better.  Using a
> random .config:
> 
> > https://sr71.net/~dave/intel/config-reloctest
> 
> the builds get a _bit_ slower, going from 37.0s->37.7s.  This is pretty
> arbitrary of course, using my compiler on my hardware, so YMMV.  But,
> for me, this seems like a reasonable tradeoff given the space savings.
> 
> I'd be curious what other people are seeing.

I am seeing a negligible difference (~1%) with LLVM 16 when targeting
the following configuration combinations and building the 'bzImage'
target.

* allmodconfig:

Benchmark 1: v6.3-rc3
  Time (mean ± σ):     93.370 s ±  0.313 s    [User: 3462.570 s, System: 371.420 s]
  Range (min … max):   92.993 s … 93.659 s    5 runs

Benchmark 2: v6.3-rc3 + "x86: Avoid relocation information in final vmlinux"
  Time (mean ± σ):     93.539 s ±  0.193 s    [User: 3464.361 s, System: 370.709 s]
  Range (min … max):   93.281 s … 93.816 s    5 runs

Summary
  'v6.3-rc3' ran
    1.00 ± 0.00 times faster than 'v6.3-rc3 + "x86: Avoid relocation information in final vmlinux"'

* allmodconfig + debug info (DWARF5):

Benchmark 1: v6.3-rc3
  Time (mean ± σ):     97.952 s ±  0.451 s    [User: 3673.380 s, System: 378.814 s]
  Range (min … max):   97.420 s … 98.568 s    5 runs

Benchmark 2: v6.3-rc3 + "x86: Avoid relocation information in final vmlinux"
  Time (mean ± σ):     98.302 s ±  1.050 s    [User: 3674.310 s, System: 378.323 s]
  Range (min … max):   97.603 s … 100.152 s    5 runs

Summary
  'v6.3-rc3' ran
    1.00 ± 0.01 times faster than 'v6.3-rc3 + "x86: Avoid relocation information in final vmlinux"'

* allyesconfig bzImage:

Benchmark 1: v6.3-rc3
  Time (mean ± σ):     674.232 s ±  1.581 s    [User: 24901.883 s, System: 2223.728 s]
  Range (min … max):   672.478 s … 676.678 s    5 runs

Benchmark 2: v6.3-rc3 + "x86: Avoid relocation information in final vmlinux"
  Time (mean ± σ):     679.783 s ±  2.454 s    [User: 24903.720 s, System: 2228.943 s]
  Range (min … max):   676.369 s … 682.772 s    5 runs

Summary
  'v6.3-rc3' ran
    1.01 ± 0.00 times faster than 'v6.3-rc3 + "x86: Avoid relocation information in final vmlinux"'

* allyesconfig + debug info (DWARF5):

Benchmark 1: v6.3-rc3
  Time (mean ± σ):     709.745 s ±  1.880 s    [User: 26570.531 s, System: 2304.563 s]
  Range (min … max):   707.918 s … 712.818 s    5 runs

Benchmark 2: v6.3-rc3 + "x86: Avoid relocation information in final vmlinux"
  Time (mean ± σ):     711.773 s ±  1.152 s    [User: 26571.973 s, System: 2307.176 s]
  Range (min … max):   710.127 s … 713.224 s    5 runs

Summary
  'v6.3-rc3' ran
    1.00 ± 0.00 times faster than 'v6.3-rc3 + "x86: Avoid relocation information in final vmlinux"'

Cheers,
Nathan