From: Steve Longerbeam <slongerbeam@gmail.com>
To: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>,
shawnguo@kernel.org, kernel@pengutronix.de,
fabio.estevam@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com,
linux@armlinux.org.uk, mchehab@kernel.org,
gregkh@linuxfoundation.org, p.zabel@pengutronix.de
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
devel@driverdev.osuosl.org,
Steve Longerbeam <steve_longerbeam@mentor.com>
Subject: Re: [PATCH v2 13/19] media: imx: Add IC subdev drivers
Date: Fri, 6 Jan 2017 10:34:56 -0800 [thread overview]
Message-ID: <b5bd5807-2db4-8677-0891-11ad74c1de7f@gmail.com> (raw)
In-Reply-To: <96684048-c5ad-3e64-0fbc-61dcaf184519@mentor.com>
On 01/04/2017 06:48 AM, Vladimir Zapolskiy wrote:
> On 01/03/2017 10:57 PM, Steve Longerbeam wrote:
>
>> +
>> + ret = ic_ops[priv->task_id]->init(priv);
>> + if (ret)
>> + return ret;
>> +
>> + ret = v4l2_async_register_subdev(&priv->sd);
>> + if (ret)
>> + goto remove;
>> +
>> + return 0;
>> +remove:
>> + ic_ops[priv->task_id]->remove(priv);
>> + return ret;
> if (ret)
> ic_ops[priv->task_id]->remove(priv);
>
> return ret;
>
> as an alternative.
done.
>
>
> +
> +static struct platform_driver imx_ic_driver = {
> + .probe = imx_ic_probe,
> + .remove = imx_ic_remove,
> + .id_table = imx_ic_ids,
> + .driver = {
> + .name = "imx-ipuv3-ic",
> + .owner = THIS_MODULE,
> Please drop .owner assignment.
done.
>> diff --git a/drivers/staging/media/imx/imx-ic-pp.c b/drivers/staging/media/imx/imx-ic-pp.c
>> new file mode 100644
>> index 0000000..5ef0581
>> --- /dev/null
>> +++ b/drivers/staging/media/imx/imx-ic-pp.c
>> @@ -0,0 +1,636 @@
>> +/*
>> + * V4L2 IC Post-Processor Subdev for Freescale i.MX5/6 SOC
>> + *
>> + * Copyright (c) 2014-2016 Mentor Graphics Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +#include <linux/module.h>
>> +#include <linux/delay.h>
>> +#include <linux/fs.h>
>> +#include <linux/timer.h>
>> +#include <linux/sched.h>
>> +#include <linux/slab.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pinctrl/consumer.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-ioctl.h>
>> +#include <media/videobuf2-dma-contig.h>
>> +#include <media/v4l2-subdev.h>
>> +#include <media/v4l2-of.h>
>> +#include <media/v4l2-ctrls.h>
> Please sort the list of headers alphabetically.
done.
>
>>
>> +
>> + priv->out_run = kzalloc(IMX_MEDIA_MAX_RING_BUFS *
>> + sizeof(*priv->out_run), GFP_KERNEL);
>> + if (!priv->out_run) {
>> + v4l2_err(&ic_priv->sd, "failed to alloc src ring runs\n");
> In OOM situation the core will report it, probably you can drop the message.
with a backtrace? I can't remember, if not I'd like to keep this.
>> diff --git a/drivers/staging/media/imx/imx-ic-prpenc.c b/drivers/staging/media/imx/imx-ic-prpenc.c
>> new file mode 100644
>> index 0000000..e17216b
>> --- /dev/null
>> +++ b/drivers/staging/media/imx/imx-ic-prpenc.c
>> @@ -0,0 +1,1037 @@
>> +/*
>> + * V4L2 Capture IC Encoder Subdev for Freescale i.MX5/6 SOC
>> + *
>> + * This subdevice handles capture of video frames from the CSI, which
>> + * are routed directly to the Image Converter preprocess encode task,
>> + * for resizing, colorspace conversion, and rotation.
>> + *
>> + * Copyright (c) 2012-2016 Mentor Graphics Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +#include <linux/module.h>
>> +#include <linux/delay.h>
>> +#include <linux/fs.h>
>> +#include <linux/timer.h>
>> +#include <linux/sched.h>
>> +#include <linux/slab.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/spinlock.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pinctrl/consumer.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-ioctl.h>
>> +#include <media/videobuf2-dma-contig.h>
>> +#include <media/v4l2-subdev.h>
>> +#include <media/v4l2-of.h>
>> +#include <media/v4l2-ctrls.h>
> Please sort the list of headers alphabetically.
done.
>
>> +static irqreturn_t prpenc_eof_interrupt(int irq, void *dev_id)
>> +{
>> + struct prpenc_priv *priv = dev_id;
>> + struct imx_media_dma_buf *done, *next;
>> + struct ipuv3_channel *channel;
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&priv->irqlock, flags);
> Here spin_lock(&priv->irqlock) should be sufficient.
done.
>> +
>> + ret = media_entity_pads_init(&sd->entity, PRPENC_NUM_PADS, priv->pad);
>> + if (ret)
>> + goto free_ctrls;
>> +
>> + return 0;
>> +free_ctrls:
>> + v4l2_ctrl_handler_free(&priv->ctrl_hdlr);
>> + return ret;
> if (ret)
> v4l2_ctrl_handler_free(&priv->ctrl_hdlr);
>
> return ret;
>
> version is shorter.
done.
>
> diff --git a/drivers/staging/media/imx/imx-ic-prpvf.c
> b/drivers/staging/media/imx/imx-ic-prpvf.c
>> new file mode 100644
>> index 0000000..53ce006
>> --- /dev/null
>> +++ b/drivers/staging/media/imx/imx-ic-prpvf.c
>> @@ -0,0 +1,1180 @@
>> +/*
>> + * V4L2 IC Deinterlacer Subdev for Freescale i.MX5/6 SOC
>> + *
>> + * Copyright (c) 2014-2016 Mentor Graphics Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +#include <linux/module.h>
>> +#include <linux/delay.h>
>> +#include <linux/fs.h>
>> +#include <linux/timer.h>
>> +#include <linux/sched.h>
>> +#include <linux/slab.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pinctrl/consumer.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-ioctl.h>
>> +#include <media/videobuf2-dma-contig.h>
>> +#include <media/v4l2-subdev.h>
>> +#include <media/v4l2-of.h>
>> +#include <media/v4l2-ctrls.h>
> Please sort the list of headers alphabetically.
done.
>
>> +/* prpvf_out_ch EOF interrupt (progressive frame ready) */
>> +static irqreturn_t prpvf_out_eof_interrupt(int irq, void *dev_id)
>> +{
>> + struct prpvf_priv *priv = dev_id;
>> + struct imx_media_dma_buf *done;
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&priv->irqlock, flags);
>
> Here spin_lock(&priv->irqlock) should be sufficient.
done.
>
>> diff --git a/drivers/staging/media/imx/imx-ic.h b/drivers/staging/media/imx/imx-ic.h
>> new file mode 100644
>> index 0000000..9aed5f5
>> --- /dev/null
>> +++ b/drivers/staging/media/imx/imx-ic.h
>> @@ -0,0 +1,36 @@
>> +/*
>> + * V4L2 Image Converter Subdev for Freescale i.MX5/6 SOC
>> + *
>> + * Copyright (c) 2016 Mentor Graphics Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +#ifndef _IMX_IC_H
>> +#define _IMX_IC_H
>> +
> Please add header files or declarations of all used structs.
done (it only needs v4l2-subdev.h).
Steve
next prev parent reply other threads:[~2017-01-06 18:35 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-03 20:57 [PATCH v2 00/19] i.MX Media Driver Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 01/19] ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 02/19] ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their connections Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 03/19] ARM: dts: imx6qdl: add media device Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 04/19] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors Steve Longerbeam
2017-01-04 12:25 ` Vladimir Zapolskiy
2017-01-05 19:20 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 05/19] ARM: dts: imx6-sabresd: " Steve Longerbeam
2017-01-04 12:33 ` Vladimir Zapolskiy
2017-01-05 22:30 ` Steve Longerbeam
2017-01-04 15:26 ` Fabio Estevam
2017-01-07 0:25 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 06/19] ARM: dts: imx6-sabreauto: create i2cmux for i2c3 Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 07/19] ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 08/19] ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 09/19] ARM: dts: imx6-sabreauto: add the ADV7180 video decoder Steve Longerbeam
2017-01-04 12:41 ` Vladimir Zapolskiy
2017-01-05 22:31 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 10/19] media: Add i.MX media core driver Steve Longerbeam
2017-01-04 13:33 ` Vladimir Zapolskiy
2017-01-06 1:21 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 11/19] media: imx: Add CSI subdev driver Steve Longerbeam
2017-01-04 13:44 ` Vladimir Zapolskiy
2017-01-06 18:05 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 12/19] media: imx: Add SMFC " Steve Longerbeam
2017-01-04 14:23 ` Vladimir Zapolskiy
2017-01-06 18:11 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 13/19] media: imx: Add IC subdev drivers Steve Longerbeam
2017-01-04 14:48 ` Vladimir Zapolskiy
2017-01-06 18:34 ` Steve Longerbeam [this message]
2017-01-03 20:57 ` [PATCH v2 14/19] media: imx: Add Camera Interface subdev driver Steve Longerbeam
2017-01-04 14:55 ` Vladimir Zapolskiy
2017-01-06 18:42 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 15/19] media: imx: Add MIPI CSI-2 Receiver " Steve Longerbeam
2017-01-04 15:05 ` Vladimir Zapolskiy
2017-01-06 18:58 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 16/19] media: imx: Add video switch " Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 17/19] media: imx: Add MIPI CSI-2 OV5640 sensor " Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 18/19] media: imx: Add Parallel OV5642 " Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 19/19] ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers Steve Longerbeam
2017-01-03 21:10 ` [PATCH v2 00/19] i.MX Media Driver Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b5bd5807-2db4-8677-0891-11ad74c1de7f@gmail.com \
--to=slongerbeam@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=gregkh@linuxfoundation.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=steve_longerbeam@mentor.com \
--cc=vladimir_zapolskiy@mentor.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).