linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jacek Anaszewski <jacek.anaszewski@gmail.com>
To: "Michał Kępień" <kernel@kempniu.pl>,
	"Richard Purdie" <rpurdie@rpsys.net>,
	"Pavel Machek" <pavel@ucw.cz>,
	"Pali Rohár" <pali.rohar@gmail.com>,
	"Darren Hart" <dvhart@infradead.org>,
	"Jaroslav Kysela" <perex@perex.cz>,
	"Takashi Iwai" <tiwai@suse.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>,
	Anthony Wong <anthony.wong@canonical.com>,
	linux-leds@vger.kernel.org, platform-driver-x86@vger.kernel.org,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 6/6] dell-led: move driver to drivers/platform/x86/dell-wmi-led.c
Date: Mon, 16 Jan 2017 21:49:54 +0100	[thread overview]
Message-ID: <b702265e-893e-e3b1-1262-f959d230d552@gmail.com> (raw)
In-Reply-To: <20170116132204.6421-7-kernel@kempniu.pl>

Hi Michał,

Thanks for the patch set.

Would you mind fixing also the following issues raised by
checkpatch.pl?:

WARNING: Missing a blank line after declarations
#376: FILE: drivers/platform/x86/dell-wmi-led.c:64:
+	struct bios_args args;
+	args.length = length;

WARNING: Block comments use * on subsequent lines
#460: FILE: drivers/platform/x86/dell-wmi-led.c:148:
+	/* The Dell LED delay is based on 125ms intervals.
+	   Need to round up to next interval. */

WARNING: Block comments use a trailing */ on a separate line
#460: FILE: drivers/platform/x86/dell-wmi-led.c:148:
+	   Need to round up to next interval. */

WARNING: Comparisons should place the constant on the right side of the test
#463: FILE: drivers/platform/x86/dell-wmi-led.c:151:
+	if (0 == on_eighths)

WARNING: Comparisons should place the constant on the right side of the test
#470: FILE: drivers/platform/x86/dell-wmi-led.c:158:
+	if (0 == off_eighths)

The fixes could be placed in an incremental patch after this one.

Best regards,
Jacek Anaszewski


On 01/16/2017 02:22 PM, Michał Kępień wrote:
> The dell-led driver handles a specific WMI GUID present on some Dell
> laptops and as such it belongs in the x86 platform driver subsystem.
> Source code is moved along with the relevant Kconfig and Makefile
> entries, with some minor modifications:
> 
>   - Kconfig option is renamed from CONFIG_LEDS_DELL_NETBOOKS to
>     CONFIG_DELL_WMI_LED,
> 
>   - the X86 Kconfig dependency is removed as the whole
>     drivers/platform/x86 menu depends on it, so there is no need to
>     duplicate it,
> 
>   - the name of the module's source file is removed from the header
>     comment to avoid the need to update it in the future.
> 
> Signed-off-by: Michał Kępień <kernel@kempniu.pl>
> ---
>  drivers/leds/Kconfig                                     | 8 --------
>  drivers/leds/Makefile                                    | 1 -
>  drivers/platform/x86/Kconfig                             | 8 ++++++++
>  drivers/platform/x86/Makefile                            | 1 +
>  drivers/{leds/dell-led.c => platform/x86/dell-wmi-led.c} | 2 --
>  5 files changed, 9 insertions(+), 11 deletions(-)
>  rename drivers/{leds/dell-led.c => platform/x86/dell-wmi-led.c} (99%)
> 
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index f29b8698ca88..5af3fb2f52e4 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -454,14 +454,6 @@ config LEDS_ADP5520
>  	  To compile this driver as a module, choose M here: the module will
>  	  be called leds-adp5520.
>  
> -config LEDS_DELL_NETBOOKS
> -	tristate "External LED on Dell Business Netbooks"
> -	depends on LEDS_CLASS
> -	depends on X86 && ACPI_WMI
> -	help
> -	  This adds support for the Latitude 2100 and similar
> -	  notebooks that have an external LED.
> -
>  config LEDS_MC13783
>  	tristate "LED Support for MC13XXX PMIC"
>  	depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 6b8273736478..558d24675454 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -52,7 +52,6 @@ obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
>  obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
>  obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
>  obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
> -obj-$(CONFIG_LEDS_DELL_NETBOOKS)	+= dell-led.o
>  obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
>  obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
>  obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 81b8dcca8891..f9018e8c1e49 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -143,6 +143,14 @@ config DELL_WMI_AIO
>  	  To compile this driver as a module, choose M here: the module will
>  	  be called dell-wmi-aio.
>  
> +config DELL_WMI_LED
> +	tristate "External LED on Dell Business Netbooks"
> +	depends on LEDS_CLASS
> +	depends on ACPI_WMI
> +	help
> +	  This adds support for the Latitude 2100 and similar
> +	  notebooks that have an external LED.
> +
>  config DELL_SMO8800
>  	tristate "Dell Latitude freefall driver (ACPI SMO88XX)"
>  	depends on ACPI
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 2efa86d2a1a7..b061817ecaf1 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_DELL_SMBIOS)	+= dell-smbios.o
>  obj-$(CONFIG_DELL_LAPTOP)	+= dell-laptop.o
>  obj-$(CONFIG_DELL_WMI)		+= dell-wmi.o
>  obj-$(CONFIG_DELL_WMI_AIO)	+= dell-wmi-aio.o
> +obj-$(CONFIG_DELL_WMI_LED)	+= dell-wmi-led.o
>  obj-$(CONFIG_DELL_SMO8800)	+= dell-smo8800.o
>  obj-$(CONFIG_DELL_RBTN)		+= dell-rbtn.o
>  obj-$(CONFIG_ACER_WMI)		+= acer-wmi.o
> diff --git a/drivers/leds/dell-led.c b/drivers/platform/x86/dell-wmi-led.c
> similarity index 99%
> rename from drivers/leds/dell-led.c
> rename to drivers/platform/x86/dell-wmi-led.c
> index e5c57389efd6..d0232c7f1909 100644
> --- a/drivers/leds/dell-led.c
> +++ b/drivers/platform/x86/dell-wmi-led.c
> @@ -1,6 +1,4 @@
>  /*
> - * dell_led.c - Dell LED Driver
> - *
>   * Copyright (C) 2010 Dell Inc.
>   * Louis Davis <louis_davis@dell.com>
>   * Jim Dailey <jim_dailey@dell.com>
> 

  reply	other threads:[~2017-01-16 20:50 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-16 13:21 [PATCH v2 0/6] Move dell-led to drivers/platform/x86 Michał Kępień
2017-01-16 13:21 ` [PATCH v2 1/6] dell-led: remove GUID check from dell_micmute_led_set() Michał Kępień
2017-01-16 13:22 ` [PATCH v2 2/6] ALSA: hda - use dell_micmute_led_set() instead of dell_app_wmi_led_set() Michał Kępień
2017-01-16 13:22 ` [PATCH v2 3/6] ALSA: hda - rename dell_led_set_func to dell_micmute_led_set_func Michał Kępień
2017-01-17 11:12   ` Pali Rohár
2017-01-17 21:20   ` Jacek Anaszewski
2017-01-16 13:22 ` [PATCH v2 4/6] platform/x86: dell-laptop: import dell_micmute_led_set() from drivers/leds/dell-led.c Michał Kępień
2017-01-17 11:23   ` Pali Rohár
2017-01-18 19:12   ` Andy Shevchenko
2017-01-16 13:22 ` [PATCH v2 5/6] dell-led: remove code related to mic mute LED Michał Kępień
2017-01-17 11:24   ` Pali Rohár
2017-01-16 13:22 ` [PATCH v2 6/6] dell-led: move driver to drivers/platform/x86/dell-wmi-led.c Michał Kępień
2017-01-16 20:49   ` Jacek Anaszewski [this message]
2017-01-17 11:08     ` Pavel Machek
2017-01-17 11:28       ` Pali Rohár
2017-01-18 19:08   ` Andy Shevchenko
2017-01-17  7:17 ` [PATCH v2 6+/6] platform/x86: dell-wmi-led: fix coding style issues Michał Kępień
2017-01-17  8:21   ` Joe Perches
2017-01-17  9:19     ` Michał Kępień
2017-01-17 21:20       ` Jacek Anaszewski
2017-01-17 11:08   ` Pavel Machek
2017-01-18 19:06   ` Andy Shevchenko
2017-01-17 21:20 ` [PATCH v2 0/6] Move dell-led to drivers/platform/x86 Jacek Anaszewski
2017-02-13 11:26 ` Michał Kępień
2017-02-15 11:56   ` Alex Hung
2017-02-15 13:54     ` Michał Kępień
2017-02-15 14:31       ` Alex Hung
2017-02-15 15:12         ` Pali Rohár
2017-02-16  9:33           ` Michał Kępień
2017-02-16  9:27         ` Michał Kępień
2017-02-16 10:35           ` Alex Hung
2017-02-16 11:32             ` Michał Kępień
2017-02-16 11:38               ` Alex Hung
2017-02-16 11:41               ` Andy Shevchenko
2017-02-16 12:01                 ` Michał Kępień
2017-02-16 13:11                   ` Andy Shevchenko
2017-02-16 22:11               ` Jacek Anaszewski
2017-02-15 20:28   ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b702265e-893e-e3b1-1262-f959d230d552@gmail.com \
    --to=jacek.anaszewski@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=anthony.wong@canonical.com \
    --cc=dvhart@infradead.org \
    --cc=kernel@kempniu.pl \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pali.rohar@gmail.com \
    --cc=pavel@ucw.cz \
    --cc=perex@perex.cz \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=rpurdie@rpsys.net \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).