* nouveau "eDP-1: EDID is invalid" regression after 4.11 with HP ZBook 15 G3
@ 2017-05-10 8:24 Tommi Rantala
2017-05-14 15:10 ` Tommi Rantala
0 siblings, 1 reply; 5+ messages in thread
From: Tommi Rantala @ 2017-05-10 8:24 UTC (permalink / raw)
To: DRI Development, nouveau; +Cc: Ben Skeggs, David Airlie, LKML
Hi,
The HP ZBook 15 G3 laptop builtin display (eDP-1) does not work
correctly with v4.11-11413-g2868b25.
When booting the laptop, the resolution seems to be limited to
1024x768, and gnome-session segfaults.
Up to 4.11 the display works just fine in 1920x1080 mode.
I'm seeing this in the kernel logs:
nouveau 0000:01:00.0: eDP-1: EDID is invalid:
[00] BAD 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
[00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff 84 53 54
[00] BAD 66 69 50 55 57 66 74 49 48 ff ff ff ff ff ff ff
[00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[00] BAD ff ff ff ff ff ff ff ff ff ff ff 00 00 ff 00 ff
nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for eDP-1
[drm] Cannot find any crtc or sizes - going 1024x768
$ lspci | grep NVIDIA
01:00.0 VGA compatible controller: NVIDIA Corporation GM107GLM [Quadro
M2000M] (rev a2)
Any ideas, or should I bisect?
4.11 dmesg & xrandr output:
https://pastebin.com/raw/P9LGP7e1
4.11-11413-g2868b25 dmesg:
https://pastebin.com/raw/QBT9mMua
-Tommi
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: nouveau "eDP-1: EDID is invalid" regression after 4.11 with HP ZBook 15 G3
2017-05-10 8:24 nouveau "eDP-1: EDID is invalid" regression after 4.11 with HP ZBook 15 G3 Tommi Rantala
@ 2017-05-14 15:10 ` Tommi Rantala
2017-05-15 0:03 ` Ben Skeggs
0 siblings, 1 reply; 5+ messages in thread
From: Tommi Rantala @ 2017-05-14 15:10 UTC (permalink / raw)
To: Ben Skeggs; +Cc: David Airlie, LKML, DRI Development, nouveau
Hi,
Bisected this to:
commit df8dc97cd17269474344d73cc02739532c468d04
Author: Ben Skeggs <bskeggs@redhat.com>
Date: Wed Mar 1 09:42:04 2017 +1000
drm/nouveau/kms/nv50: use drm core i2c-over-aux algorithm
I'm not entirely sure NVKM needs to support this now, but I haven't
removed it as of yet just in case it's needed from DEVINIT scripts
where DRM isn't available.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
dmesg after boot with drm.debug enabled:
v4.10-10409-g5c68d91 (still works):
http://termbin.com/b0is
v4.10-10410-gdf8dc97 (failure):
http://termbin.com/j6lq
Tommi
2017-05-10 11:24 GMT+03:00 Tommi Rantala <tt.rantala@gmail.com>:
> Hi,
>
> The HP ZBook 15 G3 laptop builtin display (eDP-1) does not work
> correctly with v4.11-11413-g2868b25.
>
> When booting the laptop, the resolution seems to be limited to
> 1024x768, and gnome-session segfaults.
>
> Up to 4.11 the display works just fine in 1920x1080 mode.
>
> I'm seeing this in the kernel logs:
>
> nouveau 0000:01:00.0: eDP-1: EDID is invalid:
> [00] BAD 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff 84 53 54
> [00] BAD 66 69 50 55 57 66 74 49 48 ff ff ff ff ff ff ff
> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [00] BAD ff ff ff ff ff ff ff ff ff ff ff 00 00 ff 00 ff
> nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for eDP-1
> [drm] Cannot find any crtc or sizes - going 1024x768
>
>
> $ lspci | grep NVIDIA
> 01:00.0 VGA compatible controller: NVIDIA Corporation GM107GLM [Quadro
> M2000M] (rev a2)
>
> Any ideas, or should I bisect?
>
> 4.11 dmesg & xrandr output:
> https://pastebin.com/raw/P9LGP7e1
>
> 4.11-11413-g2868b25 dmesg:
> https://pastebin.com/raw/QBT9mMua
>
> -Tommi
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: nouveau "eDP-1: EDID is invalid" regression after 4.11 with HP ZBook 15 G3
2017-05-14 15:10 ` Tommi Rantala
@ 2017-05-15 0:03 ` Ben Skeggs
2017-05-15 5:20 ` Tommi Rantala
0 siblings, 1 reply; 5+ messages in thread
From: Ben Skeggs @ 2017-05-15 0:03 UTC (permalink / raw)
To: Tommi Rantala; +Cc: David Airlie, LKML, DRI Development, nouveau
On 05/15/2017 01:10 AM, Tommi Rantala wrote:
> Hi,
Hey Tommi,
Thanks for bisecting this. It's rather unexpected that you should be
seeing problems here, but, the commit makes sense for it at least.
Are you able to get me new kernel logs of both before and after this
patch with "log_buf_len=8M drm.debug=0x14
nouveau.debug=disp=trace,i2c=trace,bios=trace" please?
Thanks,
Ben.
>
> Bisected this to:
>
> commit df8dc97cd17269474344d73cc02739532c468d04
> Author: Ben Skeggs <bskeggs@redhat.com>
> Date: Wed Mar 1 09:42:04 2017 +1000
>
> drm/nouveau/kms/nv50: use drm core i2c-over-aux algorithm
>
> I'm not entirely sure NVKM needs to support this now, but I haven't
> removed it as of yet just in case it's needed from DEVINIT scripts
> where DRM isn't available.
>
> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
>
>
> dmesg after boot with drm.debug enabled:
>
> v4.10-10409-g5c68d91 (still works):
> http://termbin.com/b0is
>
> v4.10-10410-gdf8dc97 (failure):
> http://termbin.com/j6lq
>
>
> Tommi
>
>
> 2017-05-10 11:24 GMT+03:00 Tommi Rantala <tt.rantala@gmail.com>:
>> Hi,
>>
>> The HP ZBook 15 G3 laptop builtin display (eDP-1) does not work
>> correctly with v4.11-11413-g2868b25.
>>
>> When booting the laptop, the resolution seems to be limited to
>> 1024x768, and gnome-session segfaults.
>>
>> Up to 4.11 the display works just fine in 1920x1080 mode.
>>
>> I'm seeing this in the kernel logs:
>>
>> nouveau 0000:01:00.0: eDP-1: EDID is invalid:
>> [00] BAD 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff 84 53 54
>> [00] BAD 66 69 50 55 57 66 74 49 48 ff ff ff ff ff ff ff
>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff 00 00 ff 00 ff
>> nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for eDP-1
>> [drm] Cannot find any crtc or sizes - going 1024x768
>>
>>
>> $ lspci | grep NVIDIA
>> 01:00.0 VGA compatible controller: NVIDIA Corporation GM107GLM [Quadro
>> M2000M] (rev a2)
>>
>> Any ideas, or should I bisect?
>>
>> 4.11 dmesg & xrandr output:
>> https://pastebin.com/raw/P9LGP7e1
>>
>> 4.11-11413-g2868b25 dmesg:
>> https://pastebin.com/raw/QBT9mMua
>>
>> -Tommi
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: nouveau "eDP-1: EDID is invalid" regression after 4.11 with HP ZBook 15 G3
2017-05-15 0:03 ` Ben Skeggs
@ 2017-05-15 5:20 ` Tommi Rantala
2017-06-03 13:49 ` Tommi Rantala
0 siblings, 1 reply; 5+ messages in thread
From: Tommi Rantala @ 2017-05-15 5:20 UTC (permalink / raw)
To: Ben Skeggs; +Cc: David Airlie, LKML, DRI Development, nouveau
2017-05-15 3:03 GMT+03:00 Ben Skeggs <bskeggs@redhat.com>:
> On 05/15/2017 01:10 AM, Tommi Rantala wrote:
>>
>> Hi,
>
> Hey Tommi,
>
> Thanks for bisecting this. It's rather unexpected that you should be seeing
> problems here, but, the commit makes sense for it at least.
>
> Are you able to get me new kernel logs of both before and after this patch
> with "log_buf_len=8M drm.debug=0x14
> nouveau.debug=disp=trace,i2c=trace,bios=trace" please?
Hi Ben,
Before:
https://www.dropbox.com/s/b2namqtqvzv5ppp/trace.4.10.0-tr-10409-g5c68d91?dl=1
After:
https://www.dropbox.com/s/9url8qdo15959fy/trace.4.10.0-tr-10410-gdf8dc97?dl=1
-Tommi
> Thanks,
> Ben.
>
>
>>
>> Bisected this to:
>>
>> commit df8dc97cd17269474344d73cc02739532c468d04
>> Author: Ben Skeggs <bskeggs@redhat.com>
>> Date: Wed Mar 1 09:42:04 2017 +1000
>>
>> drm/nouveau/kms/nv50: use drm core i2c-over-aux algorithm
>>
>> I'm not entirely sure NVKM needs to support this now, but I haven't
>> removed it as of yet just in case it's needed from DEVINIT scripts
>> where DRM isn't available.
>>
>> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
>>
>>
>> dmesg after boot with drm.debug enabled:
>>
>> v4.10-10409-g5c68d91 (still works):
>> http://termbin.com/b0is
>>
>> v4.10-10410-gdf8dc97 (failure):
>> http://termbin.com/j6lq
>>
>>
>> Tommi
>>
>>
>> 2017-05-10 11:24 GMT+03:00 Tommi Rantala <tt.rantala@gmail.com>:
>>>
>>> Hi,
>>>
>>> The HP ZBook 15 G3 laptop builtin display (eDP-1) does not work
>>> correctly with v4.11-11413-g2868b25.
>>>
>>> When booting the laptop, the resolution seems to be limited to
>>> 1024x768, and gnome-session segfaults.
>>>
>>> Up to 4.11 the display works just fine in 1920x1080 mode.
>>>
>>> I'm seeing this in the kernel logs:
>>>
>>> nouveau 0000:01:00.0: eDP-1: EDID is invalid:
>>> [00] BAD 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
>>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff 84 53 54
>>> [00] BAD 66 69 50 55 57 66 74 49 48 ff ff ff ff ff ff ff
>>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff 00 00 ff 00 ff
>>> nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for eDP-1
>>> [drm] Cannot find any crtc or sizes - going 1024x768
>>>
>>>
>>> $ lspci | grep NVIDIA
>>> 01:00.0 VGA compatible controller: NVIDIA Corporation GM107GLM [Quadro
>>> M2000M] (rev a2)
>>>
>>> Any ideas, or should I bisect?
>>>
>>> 4.11 dmesg & xrandr output:
>>> https://pastebin.com/raw/P9LGP7e1
>>>
>>> 4.11-11413-g2868b25 dmesg:
>>> https://pastebin.com/raw/QBT9mMua
>>>
>>> -Tommi
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: nouveau "eDP-1: EDID is invalid" regression after 4.11 with HP ZBook 15 G3
2017-05-15 5:20 ` Tommi Rantala
@ 2017-06-03 13:49 ` Tommi Rantala
0 siblings, 0 replies; 5+ messages in thread
From: Tommi Rantala @ 2017-06-03 13:49 UTC (permalink / raw)
To: Ben Skeggs; +Cc: David Airlie, LKML, DRI Development, nouveau
2017-05-15 8:20 GMT+03:00 Tommi Rantala <tt.rantala@gmail.com>:
> 2017-05-15 3:03 GMT+03:00 Ben Skeggs <bskeggs@redhat.com>:
>> On 05/15/2017 01:10 AM, Tommi Rantala wrote:
>>>
>>> Hi,
>>
>> Hey Tommi,
>>
>> Thanks for bisecting this. It's rather unexpected that you should be seeing
>> problems here, but, the commit makes sense for it at least.
>>
>> Are you able to get me new kernel logs of both before and after this patch
>> with "log_buf_len=8M drm.debug=0x14
>> nouveau.debug=disp=trace,i2c=trace,bios=trace" please?
>
> Hi Ben,
>
> Before:
> https://www.dropbox.com/s/b2namqtqvzv5ppp/trace.4.10.0-tr-10409-g5c68d91?dl=1
>
> After:
> https://www.dropbox.com/s/9url8qdo15959fy/trace.4.10.0-tr-10410-gdf8dc97?dl=1
Hi, any comments to this?
-Tommi
> -Tommi
>
>> Thanks,
>> Ben.
>>
>>
>>>
>>> Bisected this to:
>>>
>>> commit df8dc97cd17269474344d73cc02739532c468d04
>>> Author: Ben Skeggs <bskeggs@redhat.com>
>>> Date: Wed Mar 1 09:42:04 2017 +1000
>>>
>>> drm/nouveau/kms/nv50: use drm core i2c-over-aux algorithm
>>>
>>> I'm not entirely sure NVKM needs to support this now, but I haven't
>>> removed it as of yet just in case it's needed from DEVINIT scripts
>>> where DRM isn't available.
>>>
>>> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
>>>
>>>
>>> dmesg after boot with drm.debug enabled:
>>>
>>> v4.10-10409-g5c68d91 (still works):
>>> http://termbin.com/b0is
>>>
>>> v4.10-10410-gdf8dc97 (failure):
>>> http://termbin.com/j6lq
>>>
>>>
>>> Tommi
>>>
>>>
>>> 2017-05-10 11:24 GMT+03:00 Tommi Rantala <tt.rantala@gmail.com>:
>>>>
>>>> Hi,
>>>>
>>>> The HP ZBook 15 G3 laptop builtin display (eDP-1) does not work
>>>> correctly with v4.11-11413-g2868b25.
>>>>
>>>> When booting the laptop, the resolution seems to be limited to
>>>> 1024x768, and gnome-session segfaults.
>>>>
>>>> Up to 4.11 the display works just fine in 1920x1080 mode.
>>>>
>>>> I'm seeing this in the kernel logs:
>>>>
>>>> nouveau 0000:01:00.0: eDP-1: EDID is invalid:
>>>> [00] BAD 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
>>>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff 84 53 54
>>>> [00] BAD 66 69 50 55 57 66 74 49 48 ff ff ff ff ff ff ff
>>>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>> [00] BAD ff ff ff ff ff ff ff ff ff ff ff 00 00 ff 00 ff
>>>> nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for eDP-1
>>>> [drm] Cannot find any crtc or sizes - going 1024x768
>>>>
>>>>
>>>> $ lspci | grep NVIDIA
>>>> 01:00.0 VGA compatible controller: NVIDIA Corporation GM107GLM [Quadro
>>>> M2000M] (rev a2)
>>>>
>>>> Any ideas, or should I bisect?
>>>>
>>>> 4.11 dmesg & xrandr output:
>>>> https://pastebin.com/raw/P9LGP7e1
>>>>
>>>> 4.11-11413-g2868b25 dmesg:
>>>> https://pastebin.com/raw/QBT9mMua
>>>>
>>>> -Tommi
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-06-03 13:49 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-10 8:24 nouveau "eDP-1: EDID is invalid" regression after 4.11 with HP ZBook 15 G3 Tommi Rantala
2017-05-14 15:10 ` Tommi Rantala
2017-05-15 0:03 ` Ben Skeggs
2017-05-15 5:20 ` Tommi Rantala
2017-06-03 13:49 ` Tommi Rantala
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).