* [PATCH v4 0/2] dt-bindings: mfd: Add max7360 mfd driver and DT documentation
@ 2017-06-13 12:20 Valentin Sitdikov
2017-06-13 12:20 ` [PATCH 1/2] dt-bindings: mfd: Add DT bindings documentation for the max7360 mfd driver Valentin Sitdikov
2017-06-13 12:20 ` [PATCH 2/2] mfd: max7360: Add mfd core device driver Valentin Sitdikov
0 siblings, 2 replies; 10+ messages in thread
From: Valentin Sitdikov @ 2017-06-13 12:20 UTC (permalink / raw)
To: lee.jones, robh+dt, mark.rutland, devicetree, linux-kernel
Cc: Valentin Sitdikov
This series add initial support of mfd core driver for max7360 chip
Andrei Dranitca (1):
mfd: max7360: Add mfd core device driver
Valentin Sitdikov (1):
dt-bindings: mfd: Add DT bindings documentation for the max7360 mfd
driver
---
Changes since v1:
- Use proper node names
- Drop unused addresses in node names
- Fix description of interrupt-names property
Changes since v2:
- Fix rotary-encoder node name
- Add description of interrupts property
- Drop unused code
- Comment max7360 structure
- Add comments to the code
Changes since v3:
- Fix formatting
- Use devm_mfd_add_devices
Andrei Dranitca (1):
mfd: max7360: Add mfd core device driver
Valentin Sitdikov (1):
dt-bindings: mfd: Add DT bindings documentation for the max7360 mfd
driver
Documentation/devicetree/bindings/mfd/max7360.txt | 74 ++++++
drivers/mfd/Kconfig | 16 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/max7360.c | 291 ++++++++++++++++++++++
include/linux/mfd/max7360.h | 90 +++++++
5 files changed, 472 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/max7360.txt
create mode 100644 drivers/mfd/max7360.c
create mode 100644 include/linux/mfd/max7360.h
--
2.9.3
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/2] dt-bindings: mfd: Add DT bindings documentation for the max7360 mfd driver
2017-06-13 12:20 [PATCH v4 0/2] dt-bindings: mfd: Add max7360 mfd driver and DT documentation Valentin Sitdikov
@ 2017-06-13 12:20 ` Valentin Sitdikov
2017-06-13 13:28 ` Vladimir Zapolskiy
2017-06-13 12:20 ` [PATCH 2/2] mfd: max7360: Add mfd core device driver Valentin Sitdikov
1 sibling, 1 reply; 10+ messages in thread
From: Valentin Sitdikov @ 2017-06-13 12:20 UTC (permalink / raw)
To: lee.jones, robh+dt, mark.rutland, devicetree, linux-kernel
Cc: Valentin Sitdikov, Andrei Dranitca
This patch adds documentation for the max7360 bindings.
The max7360 is Multi-functional Device containing gpio,
keypad, pwm and rotary encoder submodules.
Signed-off-by: Andrei Dranitca <Andrei_Dranitca@mentor.com>
Signed-off-by: Valentin Sitdikov <valentin_sitdikov@mentor.com>
---
Documentation/devicetree/bindings/mfd/max7360.txt | 74 +++++++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/max7360.txt
diff --git a/Documentation/devicetree/bindings/mfd/max7360.txt b/Documentation/devicetree/bindings/mfd/max7360.txt
new file mode 100644
index 0000000..c2ceaf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max7360.txt
@@ -0,0 +1,74 @@
+* Maxim MAX7360 Multi-function Device
+
+The Maxim MAX7360 is a Multi-function Device which includes
+64 key switches, 8 LED drivers/GPIOs, PWM intensity control,
+and rotary switch control.
+
+Required properties:
+- compatible: Should be the following: "maxim,max7360".
+- reg: Specifies the I2C slave address of the max7360 block.
+ It can be 0x38, 0x3a, 0x3c or 0x3e IIUC.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to
+ which the interrupts from MAX7360 are routed to.
+- interrupts: List of IRQ lines specifiers.
+- interrupt-names: List of "inti" and "intk".
+- interrupt-controller: Identifies the device as an interrupt controller.
+- #interrupt-cells : Number of cells to encode an interrupt source,
+ shall be 1.
+
+Examples:
+
+Without subnodes:
+ max7360@38 {
+ compatible = "maxim,max7360";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>, <23 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "inti", "intk";
+ interrupt-controller;
+ #interrupt-cells = <0x1>;
+ };
+
+With subnodes:
+ max7360@38 {
+ compatible = "maxim,max7360";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>, <23 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "inti", "intk";
+ interrupt-controller;
+ #interrupt-cells = <0x1>;
+
+ gpio {
+ compatible = "maxim,max7360-gpio";
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ interrupts = <0>;
+ };
+
+ keypad {
+ compatible = "maxim,max7360-keypad";
+ maxim,debounce_reg = /bits/ 8 <0xef>;
+ maxim,ports_reg = /bits/ 8 <0xae>;
+ linux,keymap = < MATRIX_KEY(0, 0, KEY_F5)
+ MATRIX_KEY(1, 0, KEY_F4) >;
+ keypad,num-rows = <2>;
+ keypad,num-columns = <1>;
+ interrupts = <1>;
+ };
+
+ pwm {
+ compatible = "maxim,max7360-pwm";
+ #pwm-cells = <0x2>;
+ };
+
+ rotary-encoder {
+ compatible = "maxim,max7360-rotary";
+ interrupts = <2>;
+ };
+
+ };
--
2.9.3
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] mfd: max7360: Add mfd core device driver
2017-06-13 12:20 [PATCH v4 0/2] dt-bindings: mfd: Add max7360 mfd driver and DT documentation Valentin Sitdikov
2017-06-13 12:20 ` [PATCH 1/2] dt-bindings: mfd: Add DT bindings documentation for the max7360 mfd driver Valentin Sitdikov
@ 2017-06-13 12:20 ` Valentin Sitdikov
2017-06-13 13:41 ` Vladimir Zapolskiy
1 sibling, 1 reply; 10+ messages in thread
From: Valentin Sitdikov @ 2017-06-13 12:20 UTC (permalink / raw)
To: lee.jones, robh+dt, mark.rutland, devicetree, linux-kernel
Cc: Andrei Dranitca, Valentin Sitdikov
From: Andrei Dranitca <Andrei_Dranitca@mentor.com>
This patch adds core/irq driver to support MAX7360 i2c chip
which contains keypad, gpio, pwm, gpo and rotary encoder submodules.
Signed-off-by: Andrei Dranitca <Andrei_Dranitca@mentor.com>
Signed-off-by: Valentin Sitdikov <valentin_sitdikov@mentor.com>
---
drivers/mfd/Kconfig | 16 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/max7360.c | 291 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/max7360.h | 90 ++++++++++++++
4 files changed, 398 insertions(+)
create mode 100644 drivers/mfd/max7360.c
create mode 100644 include/linux/mfd/max7360.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3eb5c93..894c2e9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -721,6 +721,22 @@ config MFD_MAX8998
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_MAX7360
+ tristate "Maxim Semiconductor MAX7360 support"
+ depends on I2C && OF
+ select MFD_CORE
+ select REGMAP_I2C
+ select IRQ_DOMAIN
+ help
+ Say yes here to add support for Maxim Semiconductor MAX7360.
+ This provides microprocessors with management of up to 64 key switches,
+ with an additional eight LED drivers/GPIOs that feature constant-current,
+ PWM intensity control, and rotary switch control options.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_MT6397
tristate "MediaTek MT6397 PMIC Support"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c16bf1e..9e721c0 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -137,6 +137,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
obj-$(CONFIG_MFD_DA9150) += da9150-core.o
obj-$(CONFIG_MFD_MAX14577) += max14577.o
+obj-$(CONFIG_MFD_MAX7360) += max7360.o
obj-$(CONFIG_MFD_MAX77620) += max77620.o
obj-$(CONFIG_MFD_MAX77686) += max77686.o
obj-$(CONFIG_MFD_MAX77693) += max77693.o
diff --git a/drivers/mfd/max7360.c b/drivers/mfd/max7360.c
new file mode 100644
index 0000000..d18ea96
--- /dev/null
+++ b/drivers/mfd/max7360.c
@@ -0,0 +1,291 @@
+/*
+ * Copyright (C) 2017 Mentor Graphics
+ *
+ * Author: Andrei Dranitca <Andrei_Dranitca@mentor.com>
+ * Author: Valentin Sitdikov <Valentin.Sitdikov@mentor.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max7360.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+
+
+static const struct mfd_cell max7360_devices[] = {
+ {
+ .name = "max7360-gpio",
+ .of_compatible = "maxim,max7360-gpio",
+ },
+ {
+ .name = "max7360-keypad",
+ .of_compatible = "maxim,max7360-keypad",
+ },
+ {
+ .name = "max7360-pwm",
+ .of_compatible = "maxim,max7360-pwm",
+ },
+ {
+ .name = "max7360-rotary",
+ .of_compatible = "maxim,max7360-rotary",
+ },
+};
+
+static irqreturn_t max7360_irq(int irq, void *data)
+{
+ struct max7360 *max7360 = data;
+ int virq;
+
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_GPIO);
+ handle_nested_irq(virq);
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_KEYPAD);
+ handle_nested_irq(virq);
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_ROTARY);
+ handle_nested_irq(virq);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max7360_irqi(int irq, void *data)
+{
+ struct max7360 *max7360 = data;
+ int virq;
+
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_GPIO);
+ handle_nested_irq(virq);
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_ROTARY);
+ handle_nested_irq(virq);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max7360_irqk(int irq, void *data)
+{
+ struct max7360 *max7360 = data;
+ int virq;
+
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_KEYPAD);
+ handle_nested_irq(virq);
+
+ return IRQ_HANDLED;
+}
+
+static int max7360_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct max7360 *max7360 = d->host_data;
+
+ irq_set_chip_data(virq, max7360);
+ irq_set_chip_and_handler(virq, &dummy_irq_chip,
+ handle_edge_irq);
+ irq_set_nested_thread(virq, 1);
+ irq_set_noprobe(virq);
+
+ return 0;
+}
+
+static void max7360_irq_unmap(struct irq_domain *d, unsigned int virq)
+{
+ irq_set_chip_and_handler(virq, NULL, NULL);
+ irq_set_chip_data(virq, NULL);
+}
+
+static const struct irq_domain_ops max7360_irq_ops = {
+ .map = max7360_irq_map,
+ .unmap = max7360_irq_unmap,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static void max7360_free_irqs(struct max7360 *max7360)
+{
+ if (max7360->shared_irq)
+ free_irq(max7360->shared_irq, max7360);
+ else {
+ free_irq(max7360->irq_inti, max7360);
+ free_irq(max7360->irq_intk, max7360);
+ }
+}
+
+static int max7360_irq_init(struct max7360 *max7360, struct device_node *np)
+{
+ int ret;
+
+ max7360->irq_inti = of_irq_get_byname(np, "inti");
+ if (max7360->irq_inti < 0) {
+ dev_err(max7360->dev, "no inti provided");
+ return -ENODEV;
+ }
+
+ max7360->irq_intk = of_irq_get_byname(np, "intk");
+ if (max7360->irq_intk < 0) {
+ dev_err(max7360->dev, "no intk provided");
+ return -ENODEV;
+ }
+
+ if (max7360->irq_inti == max7360->irq_intk) {
+ /*
+ * In case of pin inti and pin intk are the connected
+ * to the same soc`s irq pin.
+ */
+ max7360->shared_irq = max7360->irq_inti;
+ ret = request_threaded_irq(max7360->shared_irq, NULL,
+ max7360_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "max7360", max7360);
+ if (ret) {
+ dev_err(max7360->dev, "failed to request IRQ: %d\n",
+ ret);
+ return ret;
+ }
+ } else {
+ max7360->shared_irq = 0;
+ ret = request_threaded_irq(max7360->irq_inti, NULL,
+ max7360_irqi,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "max7360", max7360);
+ if (ret) {
+ dev_err(max7360->dev, "failed to request inti IRQ: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = request_threaded_irq(max7360->irq_intk, NULL,
+ max7360_irqk,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "max7360", max7360);
+ if (ret) {
+ free_irq(max7360->irq_inti, max7360);
+ dev_err(max7360->dev, "failed to request intk IRQ: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ max7360->domain = irq_domain_add_simple(np, MAX7360_NR_INTERNAL_IRQS,
+ 0, &max7360_irq_ops, max7360);
+
+ if (!max7360->domain) {
+ max7360_free_irqs(max7360);
+ dev_err(max7360->dev, "Failed to create irqdomain\n");
+ return -ENODEV;
+ }
+
+ ret = irq_create_mapping(max7360->domain, MAX7360_INT_GPIO);
+ if (!ret) {
+ max7360_free_irqs(max7360);
+ dev_err(max7360->dev, "Failed to map GPIO IRQ\n");
+ return -EINVAL;
+ }
+
+ ret = irq_create_mapping(max7360->domain, MAX7360_INT_KEYPAD);
+ if (!ret) {
+ max7360_free_irqs(max7360);
+ dev_err(max7360->dev, "Failed to map KEYPAD IRQ\n");
+ return -EINVAL;
+ }
+
+ ret = irq_create_mapping(max7360->domain, MAX7360_INT_ROTARY);
+ if (!ret) {
+ max7360_free_irqs(max7360);
+ dev_err(max7360->dev, "Failed to map ROTARY IRQ\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+static int max7360_device_init(struct max7360 *max7360)
+{
+ int ret;
+
+ ret = devm_mfd_add_devices(max7360->dev, PLATFORM_DEVID_NONE,
+ max7360_devices,
+ ARRAY_SIZE(max7360_devices), NULL,
+ 0, max7360->domain);
+ if (ret)
+ dev_err(max7360->dev, "failed to add child devices\n");
+
+ return ret;
+}
+
+static const struct regmap_range max7360_volatile_ranges[] = {
+ {
+ .range_min = MAX7360_REG_KEYFIFO,
+ .range_max = MAX7360_REG_KEYFIFO,
+ }, {
+ .range_min = MAX7360_REG_GPIOIN,
+ .range_max = MAX7360_REG_GPIOIN,
+ },
+};
+
+static const struct regmap_access_table max7360_volatile_table = {
+ .yes_ranges = max7360_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(max7360_volatile_ranges),
+};
+
+static const struct regmap_config max7360_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0xff,
+ .volatile_table = &max7360_volatile_table,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int max7360_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct device_node *np = i2c->dev.of_node;
+ struct max7360 *max7360;
+ int ret;
+
+ max7360 = devm_kzalloc(&i2c->dev, sizeof(struct max7360),
+ GFP_KERNEL);
+ if (!max7360)
+ return -ENOMEM;
+
+ max7360->dev = &i2c->dev;
+ max7360->i2c = i2c;
+
+ i2c_set_clientdata(i2c, max7360);
+
+ max7360->regmap = devm_regmap_init_i2c(i2c, &max7360_regmap_config);
+
+ ret = max7360_irq_init(max7360, np);
+ if (ret)
+ return ret;
+
+ ret = max7360_device_init(max7360);
+ if (ret) {
+ dev_err(max7360->dev, "failed to add child devices\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id max7360_match[] = {
+ { .compatible = "maxim,max7360" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, max7360_match);
+
+static struct i2c_driver max7360_driver = {
+ .driver = {
+ .name = "max7360",
+ .of_match_table = max7360_match,
+ },
+ .probe = max7360_probe,
+};
+builtin_i2c_driver(max7360_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MAX7360 MFD core driver");
diff --git a/include/linux/mfd/max7360.h b/include/linux/mfd/max7360.h
new file mode 100644
index 0000000..c59941c
--- /dev/null
+++ b/include/linux/mfd/max7360.h
@@ -0,0 +1,90 @@
+#ifndef __LINUX_MFD_MAX7360_H
+#define __LINUX_MFD_MAX7360_H
+#include <linux/regmap.h>
+
+#define MAX7360_MAX_KEY_ROWS 8
+#define MAX7360_MAX_KEY_COLS 8
+#define MAX7360_MAX_KEY_NUM (MAX7360_MAX_KEY_ROWS * MAX7360_MAX_KEY_COLS)
+#define MAX7360_ROW_SHIFT 3
+
+#define MAX7360_MAX_GPIO 8
+#define MAX7360_MAX_GPO 6
+#define MAX7360_COL_GPO_PINS 8
+/*
+ * MAX7360 registers
+ */
+#define MAX7360_REG_KEYFIFO 0x00
+#define MAX7360_REG_CONFIG 0x01
+#define MAX7360_REG_DEBOUNCE 0x02
+#define MAX7360_REG_INTERRUPT 0x03
+#define MAX7360_REG_PORTS 0x04
+#define MAX7360_REG_KEYREP 0x05
+#define MAX7360_REG_SLEEP 0x06
+
+/*
+ * MAX7360 registers
+ */
+#define MAX7360_REG_GPIOCFG 0x40
+#define MAX7360_REG_GPIOCTRL 0x41
+#define MAX7360_REG_GPIODEB 0x42
+#define MAX7360_REG_GPIOCURR 0x43
+#define MAX7360_REG_GPIOOUTM 0x44
+#define MAX7360_REG_PWMCOM 0x45
+#define MAX7360_REG_RTRCFG 0x46
+#define MAX7360_REG_GPIOIN 0x49
+#define MAX7360_REG_RTR_CNT 0x4A
+#define MAX7360_REG_PWMBASE 0x50
+#define MAX7360_REG_PWMCFG 0x58
+
+
+#define MAX7360_REG_PORTCFGBASE 0x58
+
+/*
+ * Configuration register bits
+ */
+#define MAX7360_CFG_SLEEP BIT(7)
+#define MAX7360_CFG_INTERRUPT BIT(5)
+#define MAX7360_CFG_KEY_RELEASE BIT(3)
+#define MAX7360_CFG_WAKEUP BIT(1)
+#define MAX7360_CFG_TIMEOUT BIT(0)
+
+/*
+ * Autosleep register values (ms)
+ */
+#define MAX7360_AUTOSLEEP_8192 0x01
+#define MAX7360_AUTOSLEEP_4096 0x02
+#define MAX7360_AUTOSLEEP_2048 0x03
+#define MAX7360_AUTOSLEEP_1024 0x04
+#define MAX7360_AUTOSLEEP_512 0x05
+#define MAX7360_AUTOSLEEP_256 0x06
+
+#define MAX7360_INT_INTI 0
+#define MAX7360_INT_INTK 1
+
+#define MAX7360_INT_GPIO 0
+#define MAX7360_INT_KEYPAD 1
+#define MAX7360_INT_ROTARY 2
+
+#define MAX7360_NR_INTERNAL_IRQS 3
+
+/**
+ * struct max7360
+ * @dev: Parent device pointer
+ * @i2c: I2c client pointer
+ * @domain: Irq domain pointer
+ * @regmap: Used for I2C communication on accessing registers
+ * @shared_irq: Irq number if inti and intk pins are connected together
+ * @irq_inti: Irq number for inti pin
+ * @irq_intk: Irq number for inik pin
+ */
+struct max7360 {
+ struct device *dev;
+ struct i2c_client *i2c;
+ struct irq_domain *domain;
+ struct regmap *regmap;
+
+ int shared_irq;
+ int irq_inti;
+ int irq_intk;
+};
+#endif
--
2.9.3
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] dt-bindings: mfd: Add DT bindings documentation for the max7360 mfd driver
2017-06-13 12:20 ` [PATCH 1/2] dt-bindings: mfd: Add DT bindings documentation for the max7360 mfd driver Valentin Sitdikov
@ 2017-06-13 13:28 ` Vladimir Zapolskiy
0 siblings, 0 replies; 10+ messages in thread
From: Vladimir Zapolskiy @ 2017-06-13 13:28 UTC (permalink / raw)
To: Valentin Sitdikov, lee.jones, robh+dt, mark.rutland, devicetree,
linux-kernel
Cc: Andrei Dranitca
Hi Valentin,
On 06/13/2017 03:20 PM, Valentin Sitdikov wrote:
> This patch adds documentation for the max7360 bindings.
> The max7360 is Multi-functional Device containing gpio,
> keypad, pwm and rotary encoder submodules.
>
> Signed-off-by: Andrei Dranitca <Andrei_Dranitca@mentor.com>
> Signed-off-by: Valentin Sitdikov <valentin_sitdikov@mentor.com>
> ---
> Documentation/devicetree/bindings/mfd/max7360.txt | 74 +++++++++++++++++++++++
> 1 file changed, 74 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/max7360.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/max7360.txt b/Documentation/devicetree/bindings/mfd/max7360.txt
> new file mode 100644
> index 0000000..c2ceaf9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/max7360.txt
> @@ -0,0 +1,74 @@
> +* Maxim MAX7360 Multi-function Device
> +
> +The Maxim MAX7360 is a Multi-function Device which includes
> +64 key switches, 8 LED drivers/GPIOs, PWM intensity control,
> +and rotary switch control.
> +
> +Required properties:
> +- compatible: Should be the following: "maxim,max7360".
> +- reg: Specifies the I2C slave address of the max7360 block.
> + It can be 0x38, 0x3a, 0x3c or 0x3e IIUC.
"IIUC" note is highly undesirable ;)
> +
> +Optional properties:
> +- interrupt-parent: Specifies the phandle of the interrupt controller to
> + which the interrupts from MAX7360 are routed to.
> +- interrupts: List of IRQ lines specifiers.
> +- interrupt-names: List of "inti" and "intk".
> +- interrupt-controller: Identifies the device as an interrupt controller.
> +- #interrupt-cells : Number of cells to encode an interrupt source,
> + shall be 1.
> +
> +Examples:
> +
> +Without subnodes:
> + max7360@38 {
> + compatible = "maxim,max7360";
> + reg = <0x38>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <23 IRQ_TYPE_LEVEL_LOW>, <23 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "inti", "intk";
> + interrupt-controller;
> + #interrupt-cells = <0x1>;
> + };
Can you drop the example above? It does not bring any new information.
> +
> +With subnodes:
> + max7360@38 {
Commonly for device node names generic/device class names are utilized,
however I can not suggest what name is better.
> + compatible = "maxim,max7360";
> + reg = <0x38>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <23 IRQ_TYPE_LEVEL_LOW>, <23 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "inti", "intk";
> + interrupt-controller;
> + #interrupt-cells = <0x1>;
For #*-cells properties plese specify plain integers, #interrupt-cells = <1>;
> +
> + gpio {
> + compatible = "maxim,max7360-gpio";
> + gpio-controller;
> + #gpio-cells = <0x2>;
Please use a plain integer.
> + interrupt-controller;
> + #interrupt-cells = <0x2>;
Please use a plain integer.
> + interrupts = <0>;
> + };
> +
> + keypad {
> + compatible = "maxim,max7360-keypad";
> + maxim,debounce_reg = /bits/ 8 <0xef>;
> + maxim,ports_reg = /bits/ 8 <0xae>;
Here I'd rather suggest
1) use 32-bit values,
2) rename properties by replacing underscore by a hyphen.
> + linux,keymap = < MATRIX_KEY(0, 0, KEY_F5)
> + MATRIX_KEY(1, 0, KEY_F4) >;
> + keypad,num-rows = <2>;
> + keypad,num-columns = <1>;
> + interrupts = <1>;
> + };
> +
> + pwm {
> + compatible = "maxim,max7360-pwm";
> + #pwm-cells = <0x2>;
Please use a plain integer.
> + };
> +
> + rotary-encoder {
> + compatible = "maxim,max7360-rotary";
> + interrupts = <2>;
> + };
> +
Please drop an empty line above.
> + };
>
--
With best wishes,
Vladimir
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] mfd: max7360: Add mfd core device driver
2017-06-13 12:20 ` [PATCH 2/2] mfd: max7360: Add mfd core device driver Valentin Sitdikov
@ 2017-06-13 13:41 ` Vladimir Zapolskiy
0 siblings, 0 replies; 10+ messages in thread
From: Vladimir Zapolskiy @ 2017-06-13 13:41 UTC (permalink / raw)
To: Valentin Sitdikov, lee.jones, robh+dt, mark.rutland, devicetree,
linux-kernel
Cc: Andrei Dranitca
Hi Valentin,
On 06/13/2017 03:20 PM, Valentin Sitdikov wrote:
> From: Andrei Dranitca <Andrei_Dranitca@mentor.com>
>
> This patch adds core/irq driver to support MAX7360 i2c chip
> which contains keypad, gpio, pwm, gpo and rotary encoder submodules.
>
> Signed-off-by: Andrei Dranitca <Andrei_Dranitca@mentor.com>
> Signed-off-by: Valentin Sitdikov <valentin_sitdikov@mentor.com>
> ---
> drivers/mfd/Kconfig | 16 +++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/max7360.c | 291 ++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/max7360.h | 90 ++++++++++++++
> 4 files changed, 398 insertions(+)
> create mode 100644 drivers/mfd/max7360.c
> create mode 100644 include/linux/mfd/max7360.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3eb5c93..894c2e9 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -721,6 +721,22 @@ config MFD_MAX8998
> additional drivers must be enabled in order to use the functionality
> of the device.
>
> +config MFD_MAX7360
Can you consider to move the new section upwards to preserve
alphanumerical order at least locally?
> + tristate "Maxim Semiconductor MAX7360 support"
> + depends on I2C && OF
> + select MFD_CORE
> + select REGMAP_I2C
> + select IRQ_DOMAIN
> + help
> + Say yes here to add support for Maxim Semiconductor MAX7360.
> + This provides microprocessors with management of up to 64 key switches,
> + with an additional eight LED drivers/GPIOs that feature constant-current,
> + PWM intensity control, and rotary switch control options.
> +
> + This driver provides common support for accessing the device,
> + additional drivers must be enabled in order to use the functionality
> + of the device.
> +
> config MFD_MT6397
> tristate "MediaTek MT6397 PMIC Support"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index c16bf1e..9e721c0 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -137,6 +137,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
> obj-$(CONFIG_MFD_DA9150) += da9150-core.o
>
> obj-$(CONFIG_MFD_MAX14577) += max14577.o
> +obj-$(CONFIG_MFD_MAX7360) += max7360.o
> obj-$(CONFIG_MFD_MAX77620) += max77620.o
> obj-$(CONFIG_MFD_MAX77686) += max77686.o
> obj-$(CONFIG_MFD_MAX77693) += max77693.o
> diff --git a/drivers/mfd/max7360.c b/drivers/mfd/max7360.c
> new file mode 100644
> index 0000000..d18ea96
> --- /dev/null
> +++ b/drivers/mfd/max7360.c
> @@ -0,0 +1,291 @@
> +/*
> + * Copyright (C) 2017 Mentor Graphics
> + *
> + * Author: Andrei Dranitca <Andrei_Dranitca@mentor.com>
> + * Author: Valentin Sitdikov <Valentin.Sitdikov@mentor.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/max7360.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/slab.h>
Add <linux/regmap.h> into the list.
> +
> +
> +static const struct mfd_cell max7360_devices[] = {
> + {
> + .name = "max7360-gpio",
> + .of_compatible = "maxim,max7360-gpio",
> + },
> + {
> + .name = "max7360-keypad",
> + .of_compatible = "maxim,max7360-keypad",
> + },
> + {
> + .name = "max7360-pwm",
> + .of_compatible = "maxim,max7360-pwm",
> + },
> + {
> + .name = "max7360-rotary",
> + .of_compatible = "maxim,max7360-rotary",
> + },
> +};
Since the driver depends on OF, you don't need to list the cells.
Consider to replace devm_mfd_add_devices() with devm_of_platform_populate().
> +
> +static irqreturn_t max7360_irq(int irq, void *data)
> +{
> + struct max7360 *max7360 = data;
> + int virq;
> +
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_GPIO);
> + handle_nested_irq(virq);
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_KEYPAD);
> + handle_nested_irq(virq);
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_ROTARY);
> + handle_nested_irq(virq);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t max7360_irqi(int irq, void *data)
> +{
> + struct max7360 *max7360 = data;
> + int virq;
> +
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_GPIO);
> + handle_nested_irq(virq);
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_ROTARY);
> + handle_nested_irq(virq);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t max7360_irqk(int irq, void *data)
> +{
> + struct max7360 *max7360 = data;
> + int virq;
> +
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_KEYPAD);
> + handle_nested_irq(virq);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int max7360_irq_map(struct irq_domain *d, unsigned int virq,
> + irq_hw_number_t hwirq)
> +{
> + struct max7360 *max7360 = d->host_data;
> +
> + irq_set_chip_data(virq, max7360);
> + irq_set_chip_and_handler(virq, &dummy_irq_chip,
> + handle_edge_irq);
> + irq_set_nested_thread(virq, 1);
> + irq_set_noprobe(virq);
> +
> + return 0;
> +}
> +
> +static void max7360_irq_unmap(struct irq_domain *d, unsigned int virq)
> +{
> + irq_set_chip_and_handler(virq, NULL, NULL);
> + irq_set_chip_data(virq, NULL);
> +}
> +
> +static const struct irq_domain_ops max7360_irq_ops = {
> + .map = max7360_irq_map,
> + .unmap = max7360_irq_unmap,
> + .xlate = irq_domain_xlate_onecell,
> +};
> +
> +static void max7360_free_irqs(struct max7360 *max7360)
> +{
> + if (max7360->shared_irq)
> + free_irq(max7360->shared_irq, max7360);
> + else {
> + free_irq(max7360->irq_inti, max7360);
> + free_irq(max7360->irq_intk, max7360);
> + }
> +}
> +
> +static int max7360_irq_init(struct max7360 *max7360, struct device_node *np)
> +{
> + int ret;
> +
> + max7360->irq_inti = of_irq_get_byname(np, "inti");
> + if (max7360->irq_inti < 0) {
> + dev_err(max7360->dev, "no inti provided");
> + return -ENODEV;
> + }
> +
> + max7360->irq_intk = of_irq_get_byname(np, "intk");
> + if (max7360->irq_intk < 0) {
> + dev_err(max7360->dev, "no intk provided");
> + return -ENODEV;
> + }
> +
> + if (max7360->irq_inti == max7360->irq_intk) {
> + /*
> + * In case of pin inti and pin intk are the connected
> + * to the same soc`s irq pin.
> + */
> + max7360->shared_irq = max7360->irq_inti;
> + ret = request_threaded_irq(max7360->shared_irq, NULL,
> + max7360_irq,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "max7360", max7360);
> + if (ret) {
> + dev_err(max7360->dev, "failed to request IRQ: %d\n",
> + ret);
> + return ret;
> + }
> + } else {
> + max7360->shared_irq = 0;
> + ret = request_threaded_irq(max7360->irq_inti, NULL,
> + max7360_irqi,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "max7360", max7360);
> + if (ret) {
> + dev_err(max7360->dev, "failed to request inti IRQ: %d\n",
> + ret);
> + return ret;
> + }
> +
> + ret = request_threaded_irq(max7360->irq_intk, NULL,
> + max7360_irqk,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "max7360", max7360);
> + if (ret) {
> + free_irq(max7360->irq_inti, max7360);
> + dev_err(max7360->dev, "failed to request intk IRQ: %d\n",
> + ret);
> + return ret;
> + }
> + }
> +
> + max7360->domain = irq_domain_add_simple(np, MAX7360_NR_INTERNAL_IRQS,
> + 0, &max7360_irq_ops, max7360);
> +
> + if (!max7360->domain) {
> + max7360_free_irqs(max7360);
> + dev_err(max7360->dev, "Failed to create irqdomain\n");
> + return -ENODEV;
> + }
> +
> + ret = irq_create_mapping(max7360->domain, MAX7360_INT_GPIO);
> + if (!ret) {
> + max7360_free_irqs(max7360);
> + dev_err(max7360->dev, "Failed to map GPIO IRQ\n");
> + return -EINVAL;
> + }
> +
> + ret = irq_create_mapping(max7360->domain, MAX7360_INT_KEYPAD);
> + if (!ret) {
> + max7360_free_irqs(max7360);
> + dev_err(max7360->dev, "Failed to map KEYPAD IRQ\n");
> + return -EINVAL;
> + }
> +
> + ret = irq_create_mapping(max7360->domain, MAX7360_INT_ROTARY);
> + if (!ret) {
> + max7360_free_irqs(max7360);
> + dev_err(max7360->dev, "Failed to map ROTARY IRQ\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +static int max7360_device_init(struct max7360 *max7360)
> +{
> + int ret;
> +
> + ret = devm_mfd_add_devices(max7360->dev, PLATFORM_DEVID_NONE,
> + max7360_devices,
> + ARRAY_SIZE(max7360_devices), NULL,
> + 0, max7360->domain);
> + if (ret)
> + dev_err(max7360->dev, "failed to add child devices\n");
> +
> + return ret;
> +}
> +
> +static const struct regmap_range max7360_volatile_ranges[] = {
> + {
> + .range_min = MAX7360_REG_KEYFIFO,
> + .range_max = MAX7360_REG_KEYFIFO,
> + }, {
> + .range_min = MAX7360_REG_GPIOIN,
> + .range_max = MAX7360_REG_GPIOIN,
> + },
> +};
> +
> +static const struct regmap_access_table max7360_volatile_table = {
> + .yes_ranges = max7360_volatile_ranges,
> + .n_yes_ranges = ARRAY_SIZE(max7360_volatile_ranges),
> +};
> +
> +static const struct regmap_config max7360_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0xff,
> + .volatile_table = &max7360_volatile_table,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int max7360_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct device_node *np = i2c->dev.of_node;
> + struct max7360 *max7360;
> + int ret;
> +
> + max7360 = devm_kzalloc(&i2c->dev, sizeof(struct max7360),
> + GFP_KERNEL);
> + if (!max7360)
> + return -ENOMEM;
> +
> + max7360->dev = &i2c->dev;
> + max7360->i2c = i2c;
> +
> + i2c_set_clientdata(i2c, max7360);
> +
> + max7360->regmap = devm_regmap_init_i2c(i2c, &max7360_regmap_config);
Missing error check.
> +
> + ret = max7360_irq_init(max7360, np);
> + if (ret)
> + return ret;
On driver unload, device removal and error path below a plenty of requested
IRQ resources are leaked.
Also can you evaluate if regmap-irq interface is suitable to be used
within the driver?
> +
> + ret = max7360_device_init(max7360);
> + if (ret) {
> + dev_err(max7360->dev, "failed to add child devices\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id max7360_match[] = {
> + { .compatible = "maxim,max7360" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, max7360_match);
> +
> +static struct i2c_driver max7360_driver = {
> + .driver = {
> + .name = "max7360",
> + .of_match_table = max7360_match,
> + },
> + .probe = max7360_probe,
> +};
> +builtin_i2c_driver(max7360_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("MAX7360 MFD core driver");
> diff --git a/include/linux/mfd/max7360.h b/include/linux/mfd/max7360.h
> new file mode 100644
> index 0000000..c59941c
> --- /dev/null
> +++ b/include/linux/mfd/max7360.h
> @@ -0,0 +1,90 @@
> +#ifndef __LINUX_MFD_MAX7360_H
> +#define __LINUX_MFD_MAX7360_H
> +#include <linux/regmap.h>
> +
> +#define MAX7360_MAX_KEY_ROWS 8
> +#define MAX7360_MAX_KEY_COLS 8
> +#define MAX7360_MAX_KEY_NUM (MAX7360_MAX_KEY_ROWS * MAX7360_MAX_KEY_COLS)
> +#define MAX7360_ROW_SHIFT 3
> +
> +#define MAX7360_MAX_GPIO 8
> +#define MAX7360_MAX_GPO 6
> +#define MAX7360_COL_GPO_PINS 8
> +/*
> + * MAX7360 registers
> + */
> +#define MAX7360_REG_KEYFIFO 0x00
> +#define MAX7360_REG_CONFIG 0x01
> +#define MAX7360_REG_DEBOUNCE 0x02
> +#define MAX7360_REG_INTERRUPT 0x03
> +#define MAX7360_REG_PORTS 0x04
> +#define MAX7360_REG_KEYREP 0x05
> +#define MAX7360_REG_SLEEP 0x06
> +
> +/*
> + * MAX7360 registers
> + */
> +#define MAX7360_REG_GPIOCFG 0x40
> +#define MAX7360_REG_GPIOCTRL 0x41
> +#define MAX7360_REG_GPIODEB 0x42
> +#define MAX7360_REG_GPIOCURR 0x43
> +#define MAX7360_REG_GPIOOUTM 0x44
> +#define MAX7360_REG_PWMCOM 0x45
> +#define MAX7360_REG_RTRCFG 0x46
> +#define MAX7360_REG_GPIOIN 0x49
> +#define MAX7360_REG_RTR_CNT 0x4A
> +#define MAX7360_REG_PWMBASE 0x50
> +#define MAX7360_REG_PWMCFG 0x58
> +
> +
> +#define MAX7360_REG_PORTCFGBASE 0x58
> +
> +/*
> + * Configuration register bits
> + */
> +#define MAX7360_CFG_SLEEP BIT(7)
> +#define MAX7360_CFG_INTERRUPT BIT(5)
> +#define MAX7360_CFG_KEY_RELEASE BIT(3)
> +#define MAX7360_CFG_WAKEUP BIT(1)
> +#define MAX7360_CFG_TIMEOUT BIT(0)
> +
> +/*
> + * Autosleep register values (ms)
> + */
> +#define MAX7360_AUTOSLEEP_8192 0x01
> +#define MAX7360_AUTOSLEEP_4096 0x02
> +#define MAX7360_AUTOSLEEP_2048 0x03
> +#define MAX7360_AUTOSLEEP_1024 0x04
> +#define MAX7360_AUTOSLEEP_512 0x05
> +#define MAX7360_AUTOSLEEP_256 0x06
> +
> +#define MAX7360_INT_INTI 0
> +#define MAX7360_INT_INTK 1
> +
> +#define MAX7360_INT_GPIO 0
> +#define MAX7360_INT_KEYPAD 1
> +#define MAX7360_INT_ROTARY 2
> +
> +#define MAX7360_NR_INTERNAL_IRQS 3
> +
> +/**
> + * struct max7360
> + * @dev: Parent device pointer
> + * @i2c: I2c client pointer
> + * @domain: Irq domain pointer
> + * @regmap: Used for I2C communication on accessing registers
> + * @shared_irq: Irq number if inti and intk pins are connected together
> + * @irq_inti: Irq number for inti pin
> + * @irq_intk: Irq number for inik pin
> + */
> +struct max7360 {
> + struct device *dev;
> + struct i2c_client *i2c;
> + struct irq_domain *domain;
> + struct regmap *regmap;
> +
> + int shared_irq;
> + int irq_inti;
> + int irq_intk;
> +};
I'd recommend to hide this structure inside the MFD driver, it should
be possible.
> +#endif
>
--
With best wishes,
Vladimir
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] mfd: max7360: Add mfd core device driver
2017-06-02 16:21 ` [PATCH 2/2] mfd: max7360: Add mfd core device driver Valentin Sitdikov
@ 2017-06-05 9:29 ` Lee Jones
0 siblings, 0 replies; 10+ messages in thread
From: Lee Jones @ 2017-06-05 9:29 UTC (permalink / raw)
To: Valentin Sitdikov
Cc: robh+dt, mark.rutland, devicetree, linux-kernel, Andrei Dranitca
On Fri, 02 Jun 2017, Valentin Sitdikov wrote:
> From: Andrei Dranitca <Andrei_Dranitca@mentor.com>
>
> This patch adds core/IRQ driver to support MAX7360 I2C chip
> which contains keypad, GPIO, PWM, GPO and rotary encoder submodules.
>
> Signed-off-by: Andrei Dranitca <Andrei_Dranitca@mentor.com>
> Signed-off-by: Valentin Sitdikov <valentin_sitdikov@mentor.com>
> ---
> drivers/mfd/Kconfig | 16 +++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/max7360.c | 302 ++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/max7360.h | 90 +++++++++++++
> 4 files changed, 409 insertions(+)
> create mode 100644 drivers/mfd/max7360.c
> create mode 100644 include/linux/mfd/max7360.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3eb5c93..894c2e9 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -721,6 +721,22 @@ config MFD_MAX8998
> additional drivers must be enabled in order to use the functionality
> of the device.
>
> +config MFD_MAX7360
> + tristate "Maxim Semiconductor MAX7360 support"
> + depends on I2C && OF
> + select MFD_CORE
> + select REGMAP_I2C
> + select IRQ_DOMAIN
> + help
> + Say yes here to add support for Maxim Semiconductor MAX7360.
> + This provides microprocessors with management of up to 64 key switches,
> + with an additional eight LED drivers/GPIOs that feature constant-current,
> + PWM intensity control, and rotary switch control options.
> +
> + This driver provides common support for accessing the device,
> + additional drivers must be enabled in order to use the functionality
> + of the device.
> +
> config MFD_MT6397
> tristate "MediaTek MT6397 PMIC Support"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index c16bf1e..9e721c0 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -137,6 +137,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
> obj-$(CONFIG_MFD_DA9150) += da9150-core.o
>
> obj-$(CONFIG_MFD_MAX14577) += max14577.o
> +obj-$(CONFIG_MFD_MAX7360) += max7360.o
> obj-$(CONFIG_MFD_MAX77620) += max77620.o
> obj-$(CONFIG_MFD_MAX77686) += max77686.o
> obj-$(CONFIG_MFD_MAX77693) += max77693.o
> diff --git a/drivers/mfd/max7360.c b/drivers/mfd/max7360.c
> new file mode 100644
> index 0000000..2bfd3e2
> --- /dev/null
> +++ b/drivers/mfd/max7360.c
> @@ -0,0 +1,302 @@
> +/*
> + * Copyright (C) 2017 Mentor Graphics
> + *
> + * Author: Andrei Dranitca <Andrei_Dranitca@mentor.com>
> + * Author: Valentin Sitdikov <Valentin.Sitdikov@mentor.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/max7360.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/slab.h>
> +
> +
> +static const struct mfd_cell max7360_devices[] = {
> + {
> + .name = "max7360-gpio",
> + .of_compatible = "maxim,max7360-gpio",
> + },
> + {
> + .name = "max7360-keypad",
> + .of_compatible = "maxim,max7360-keypad",
> + },
> + {
> + .name = "max7360-pwm",
> + .of_compatible = "maxim,max7360-pwm",
> + },
> + {
> + .name = "max7360-rotary",
> + .of_compatible = "maxim,max7360-rotary",
> + },
> +};
> +
> +static irqreturn_t max7360_irq(int irq, void *data)
> +{
> + struct max7360 *max7360 = data;
> + int virq;
> +
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_GPIO);
> + handle_nested_irq(virq);
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_KEYPAD);
> + handle_nested_irq(virq);
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_ROTARY);
> + handle_nested_irq(virq);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t max7360_irqi(int irq, void *data)
> +{
> + struct max7360 *max7360 = data;
> + int virq;
> +
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_GPIO);
> + handle_nested_irq(virq);
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_ROTARY);
> + handle_nested_irq(virq);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t max7360_irqk(int irq, void *data)
> +{
> + struct max7360 *max7360 = data;
> + int virq;
> +
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_KEYPAD);
> + handle_nested_irq(virq);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int max7360_irq_map(struct irq_domain *d, unsigned int virq,
> + irq_hw_number_t hwirq)
> +{
> + struct max7360 *max7360 = d->host_data;
> +
> + irq_set_chip_data(virq, max7360);
> + irq_set_chip_and_handler(virq, &dummy_irq_chip,
> + handle_edge_irq);
> + irq_set_nested_thread(virq, 1);
> + irq_set_noprobe(virq);
> +
> + return 0;
> +}
> +
> +static void max7360_irq_unmap(struct irq_domain *d, unsigned int virq)
> +{
> + irq_set_chip_and_handler(virq, NULL, NULL);
> + irq_set_chip_data(virq, NULL);
> +}
> +
> +static const struct irq_domain_ops max7360_irq_ops = {
> + .map = max7360_irq_map,
> + .unmap = max7360_irq_unmap,
> + .xlate = irq_domain_xlate_onecell,
> +};
> +
> +static void max7360_free_irqs(struct max7360 *max7360)
> +{
> + if (max7360->shared_irq)
> + free_irq(max7360->shared_irq, max7360);
> + else {
> + free_irq(max7360->irq_inti, max7360);
> + free_irq(max7360->irq_intk, max7360);
> + }
> +}
> +
> +static int max7360_irq_init(struct max7360 *max7360, struct device_node *np)
> +{
> + int ret;
> +
> + max7360->irq_inti = of_irq_get_byname(np, "inti");
> + if (max7360->irq_inti < 0) {
> + dev_err(max7360->dev, "no inti provided");
> + return -ENODEV;
> + }
> +
> + max7360->irq_intk = of_irq_get_byname(np, "intk");
> + if (max7360->irq_intk < 0) {
> + dev_err(max7360->dev, "no intk provided");
> + return -ENODEV;
> + }
> +
> + if (max7360->irq_inti == max7360->irq_intk) {
> + /*
> + * In case of pin inti and pin intk are the connected
> + * to the same soc`s irq pin.
> + */
> + max7360->shared_irq = max7360->irq_inti;
> + ret = request_threaded_irq(max7360->shared_irq, NULL,
> + max7360_irq,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "max7360", max7360);
> + if (ret) {
> + dev_err(max7360->dev, "failed to request IRQ: %d\n",
> + ret);
> + return ret;
> + }
> + } else {
> + max7360->shared_irq = 0;
> + ret = request_threaded_irq(max7360->irq_inti, NULL,
> + max7360_irqi,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "max7360", max7360);
> + if (ret) {
> + dev_err(max7360->dev, "failed to request inti IRQ: %d\n",
> + ret);
> + return ret;
> + }
> +
> + ret = request_threaded_irq(max7360->irq_intk, NULL,
> + max7360_irqk,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "max7360", max7360);
> + if (ret) {
> + free_irq(max7360->irq_inti, max7360);
> + dev_err(max7360->dev, "failed to request intk IRQ: %d\n",
> + ret);
> + return ret;
> + }
> + }
> +
> + max7360->domain = irq_domain_add_simple(np, MAX7360_NR_INTERNAL_IRQS,
> + 0, &max7360_irq_ops, max7360);
> +
> + if (!max7360->domain) {
> + max7360_free_irqs(max7360);
> + dev_err(max7360->dev, "Failed to create irqdomain\n");
> + return -ENODEV;
> + }
> +
> + ret = irq_create_mapping(max7360->domain, MAX7360_INT_GPIO);
> + if (!ret) {
> + max7360_free_irqs(max7360);
> + dev_err(max7360->dev, "Failed to map GPIO IRQ\n");
> + return -EINVAL;
> + }
> +
> + ret = irq_create_mapping(max7360->domain, MAX7360_INT_KEYPAD);
> + if (!ret) {
> + max7360_free_irqs(max7360);
> + dev_err(max7360->dev, "Failed to map KEYPAD IRQ\n");
> + return -EINVAL;
> + }
> +
> + ret = irq_create_mapping(max7360->domain, MAX7360_INT_ROTARY);
> + if (!ret) {
> + max7360_free_irqs(max7360);
> + dev_err(max7360->dev, "Failed to map ROTARY IRQ\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +static int max7360_device_init(struct max7360 *max7360)
> +{
> + int ret;
> +
> + ret = mfd_add_devices(max7360->dev, PLATFORM_DEVID_NONE,
> + max7360_devices,
> + ARRAY_SIZE(max7360_devices), NULL,
> + 0, max7360->domain);
> + if (ret)
> + dev_err(max7360->dev, "failed to add child devices\n");
> +
> + return ret;
> +}
> +
> +static const struct regmap_range max7360_volatile_ranges[] = {
> + {
> + .range_min = MAX7360_REG_KEYFIFO,
> + .range_max = MAX7360_REG_KEYFIFO,
> + }, {
> + .range_min = MAX7360_REG_GPIOIN,
> + .range_max = MAX7360_REG_GPIOIN,
> + },
> +};
> +
> +static const struct regmap_access_table max7360_volatile_table = {
> + .yes_ranges = max7360_volatile_ranges,
> + .n_yes_ranges = ARRAY_SIZE(max7360_volatile_ranges),
> +};
> +
> +static const struct regmap_config max7360_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0xff,
> + .volatile_table = &max7360_volatile_table,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int max7360_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct device_node *np = i2c->dev.of_node;
> + struct max7360 *max7360;
> + int ret;
> +
> + max7360 = devm_kzalloc(&i2c->dev, sizeof(struct max7360),
> + GFP_KERNEL);
> + if (!max7360)
> + return -ENOMEM;
> +
> + max7360->dev = &i2c->dev;
> + max7360->i2c = i2c;
> +
> + i2c_set_clientdata(i2c, max7360);
> +
> + max7360->regmap = devm_regmap_init_i2c(i2c, &max7360_regmap_config);
> +
> + ret = max7360_irq_init(max7360, np);
> + if (ret)
> + return ret;
> +
> + ret = max7360_device_init(max7360);
> + if (ret) {
> + dev_err(max7360->dev, "failed to add child devices\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int max7360_remove(struct i2c_client *client)
> +{
> + struct max7360 *max7360 = i2c_get_clientdata(client);
> +
> + mfd_remove_devices(max7360->dev);
Any reason you can't use devm_*?
Then this whole function can go away.
> + return 0;
> +}
> +
> +static const struct of_device_id max7360_match[] = {
> + { .compatible = "maxim,max7360" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, max7360_match);
> +
> +static struct i2c_driver max7360_driver = {
> + .driver = {
> + .name = "max7360",
> + .of_match_table = max7360_match,
> + },
> + .probe = max7360_probe,
> + .remove = max7360_remove,
I'd rather you didn't try to line up the '='.
It doesn't improve the code/readability IMHO.
> +};
> +
Remove this line.
> +builtin_i2c_driver(max7360_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("MAX7360 MFD core driver");
> diff --git a/include/linux/mfd/max7360.h b/include/linux/mfd/max7360.h
> new file mode 100644
> index 0000000..c350d5e
> --- /dev/null
> +++ b/include/linux/mfd/max7360.h
> @@ -0,0 +1,90 @@
> +#ifndef __LINUX_MFD_MAX7360_H
> +#define __LINUX_MFD_MAX7360_H
> +#include <linux/regmap.h>
> +
> +#define MAX7360_MAX_KEY_ROWS 8
> +#define MAX7360_MAX_KEY_COLS 8
> +#define MAX7360_MAX_KEY_NUM (MAX7360_MAX_KEY_ROWS * MAX7360_MAX_KEY_COLS)
> +#define MAX7360_ROW_SHIFT 3
> +
> +#define MAX7360_MAX_GPIO 8
> +#define MAX7360_MAX_GPO 6
> +#define MAX7360_COL_GPO_PINS 8
> +/*
> + * MAX7360 registers
> + */
> +#define MAX7360_REG_KEYFIFO 0x00
> +#define MAX7360_REG_CONFIG 0x01
> +#define MAX7360_REG_DEBOUNCE 0x02
> +#define MAX7360_REG_INTERRUPT 0x03
> +#define MAX7360_REG_PORTS 0x04
> +#define MAX7360_REG_KEYREP 0x05
> +#define MAX7360_REG_SLEEP 0x06
> +
> +/*
> + * MAX7360 registers
> + */
> +#define MAX7360_REG_GPIOCFG 0x40
> +#define MAX7360_REG_GPIOCTRL 0x41
> +#define MAX7360_REG_GPIODEB 0x42
> +#define MAX7360_REG_GPIOCURR 0x43
> +#define MAX7360_REG_GPIOOUTM 0x44
> +#define MAX7360_REG_PWMCOM 0x45
> +#define MAX7360_REG_RTRCFG 0x46
> +#define MAX7360_REG_GPIOIN 0x49
> +#define MAX7360_REG_RTR_CNT 0x4A
> +#define MAX7360_REG_PWMBASE 0x50
> +#define MAX7360_REG_PWMCFG 0x58
> +
> +
> +#define MAX7360_REG_PORTCFGBASE 0x58
> +
> +/*
> + * Configuration register bits
> + */
> +#define MAX7360_CFG_SLEEP BIT(7)
> +#define MAX7360_CFG_INTERRUPT BIT(5)
> +#define MAX7360_CFG_KEY_RELEASE BIT(3)
> +#define MAX7360_CFG_WAKEUP BIT(1)
> +#define MAX7360_CFG_TIMEOUT BIT(0)
> +
> +/*
> + * Autosleep register values (ms)
> + */
> +#define MAX7360_AUTOSLEEP_8192 0x01
> +#define MAX7360_AUTOSLEEP_4096 0x02
> +#define MAX7360_AUTOSLEEP_2048 0x03
> +#define MAX7360_AUTOSLEEP_1024 0x04
> +#define MAX7360_AUTOSLEEP_512 0x05
> +#define MAX7360_AUTOSLEEP_256 0x06
> +
> +#define MAX7360_INT_INTI 0
> +#define MAX7360_INT_INTK 1
> +
> +#define MAX7360_INT_GPIO 0
> +#define MAX7360_INT_KEYPAD 1
> +#define MAX7360_INT_ROTARY 2
> +
> +#define MAX7360_NR_INTERNAL_IRQS 3
> +
> +/**
> + * struct max7360
> + * @dev: Parent device pointer
> + * @i2c: I2c client pointer
> + * @domain: Irq domain pointer
> + * @regmap: Used for I2C communication on accessing registers
> + * shared_irq: Irq number if inti and intk pins are connected together
> + * irq_inti: Irq number for inti pin
> + * irq_intk: Irq number for inik pin
> + */
Don't you think:
> + * @dev: Parent device pointer
> + * @i2c: I2c client pointer
> + * @domain: Irq domain pointer
> + * @regmap: Used for I2C communication on accessing registers
> + * shared_irq: Irq number if inti and intk pins are connected together
> + * irq_inti: Irq number for inti pin
> + * irq_intk: Irq number for inik pin
.. is better?
> +struct max7360 {
> + struct device *dev;
> + struct i2c_client *i2c;
> + struct irq_domain *domain;
> + struct regmap *regmap;
> +
> + int shared_irq;
> + int irq_inti;
> + int irq_intk;
Same here:
> + struct device *dev;
> + struct i2c_client *i2c;
> + struct irq_domain *domain;
> + struct regmap *regmap;
> +
> + int shared_irq;
> + int irq_inti;
> + int irq_intk;
> +};
> +#endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/2] mfd: max7360: Add mfd core device driver
2017-06-02 16:21 [PATCH v3 0/2] dt-bindings: mfd: Add max7360 mfd driver and DT documentation Valentin Sitdikov
@ 2017-06-02 16:21 ` Valentin Sitdikov
2017-06-05 9:29 ` Lee Jones
0 siblings, 1 reply; 10+ messages in thread
From: Valentin Sitdikov @ 2017-06-02 16:21 UTC (permalink / raw)
To: lee.jones, robh+dt, mark.rutland, devicetree, linux-kernel
Cc: Andrei Dranitca, Valentin Sitdikov
From: Andrei Dranitca <Andrei_Dranitca@mentor.com>
This patch adds core/IRQ driver to support MAX7360 I2C chip
which contains keypad, GPIO, PWM, GPO and rotary encoder submodules.
Signed-off-by: Andrei Dranitca <Andrei_Dranitca@mentor.com>
Signed-off-by: Valentin Sitdikov <valentin_sitdikov@mentor.com>
---
drivers/mfd/Kconfig | 16 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/max7360.c | 302 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/max7360.h | 90 +++++++++++++
4 files changed, 409 insertions(+)
create mode 100644 drivers/mfd/max7360.c
create mode 100644 include/linux/mfd/max7360.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3eb5c93..894c2e9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -721,6 +721,22 @@ config MFD_MAX8998
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_MAX7360
+ tristate "Maxim Semiconductor MAX7360 support"
+ depends on I2C && OF
+ select MFD_CORE
+ select REGMAP_I2C
+ select IRQ_DOMAIN
+ help
+ Say yes here to add support for Maxim Semiconductor MAX7360.
+ This provides microprocessors with management of up to 64 key switches,
+ with an additional eight LED drivers/GPIOs that feature constant-current,
+ PWM intensity control, and rotary switch control options.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_MT6397
tristate "MediaTek MT6397 PMIC Support"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c16bf1e..9e721c0 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -137,6 +137,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
obj-$(CONFIG_MFD_DA9150) += da9150-core.o
obj-$(CONFIG_MFD_MAX14577) += max14577.o
+obj-$(CONFIG_MFD_MAX7360) += max7360.o
obj-$(CONFIG_MFD_MAX77620) += max77620.o
obj-$(CONFIG_MFD_MAX77686) += max77686.o
obj-$(CONFIG_MFD_MAX77693) += max77693.o
diff --git a/drivers/mfd/max7360.c b/drivers/mfd/max7360.c
new file mode 100644
index 0000000..2bfd3e2
--- /dev/null
+++ b/drivers/mfd/max7360.c
@@ -0,0 +1,302 @@
+/*
+ * Copyright (C) 2017 Mentor Graphics
+ *
+ * Author: Andrei Dranitca <Andrei_Dranitca@mentor.com>
+ * Author: Valentin Sitdikov <Valentin.Sitdikov@mentor.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max7360.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+
+
+static const struct mfd_cell max7360_devices[] = {
+ {
+ .name = "max7360-gpio",
+ .of_compatible = "maxim,max7360-gpio",
+ },
+ {
+ .name = "max7360-keypad",
+ .of_compatible = "maxim,max7360-keypad",
+ },
+ {
+ .name = "max7360-pwm",
+ .of_compatible = "maxim,max7360-pwm",
+ },
+ {
+ .name = "max7360-rotary",
+ .of_compatible = "maxim,max7360-rotary",
+ },
+};
+
+static irqreturn_t max7360_irq(int irq, void *data)
+{
+ struct max7360 *max7360 = data;
+ int virq;
+
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_GPIO);
+ handle_nested_irq(virq);
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_KEYPAD);
+ handle_nested_irq(virq);
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_ROTARY);
+ handle_nested_irq(virq);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max7360_irqi(int irq, void *data)
+{
+ struct max7360 *max7360 = data;
+ int virq;
+
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_GPIO);
+ handle_nested_irq(virq);
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_ROTARY);
+ handle_nested_irq(virq);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max7360_irqk(int irq, void *data)
+{
+ struct max7360 *max7360 = data;
+ int virq;
+
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_KEYPAD);
+ handle_nested_irq(virq);
+
+ return IRQ_HANDLED;
+}
+
+static int max7360_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct max7360 *max7360 = d->host_data;
+
+ irq_set_chip_data(virq, max7360);
+ irq_set_chip_and_handler(virq, &dummy_irq_chip,
+ handle_edge_irq);
+ irq_set_nested_thread(virq, 1);
+ irq_set_noprobe(virq);
+
+ return 0;
+}
+
+static void max7360_irq_unmap(struct irq_domain *d, unsigned int virq)
+{
+ irq_set_chip_and_handler(virq, NULL, NULL);
+ irq_set_chip_data(virq, NULL);
+}
+
+static const struct irq_domain_ops max7360_irq_ops = {
+ .map = max7360_irq_map,
+ .unmap = max7360_irq_unmap,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static void max7360_free_irqs(struct max7360 *max7360)
+{
+ if (max7360->shared_irq)
+ free_irq(max7360->shared_irq, max7360);
+ else {
+ free_irq(max7360->irq_inti, max7360);
+ free_irq(max7360->irq_intk, max7360);
+ }
+}
+
+static int max7360_irq_init(struct max7360 *max7360, struct device_node *np)
+{
+ int ret;
+
+ max7360->irq_inti = of_irq_get_byname(np, "inti");
+ if (max7360->irq_inti < 0) {
+ dev_err(max7360->dev, "no inti provided");
+ return -ENODEV;
+ }
+
+ max7360->irq_intk = of_irq_get_byname(np, "intk");
+ if (max7360->irq_intk < 0) {
+ dev_err(max7360->dev, "no intk provided");
+ return -ENODEV;
+ }
+
+ if (max7360->irq_inti == max7360->irq_intk) {
+ /*
+ * In case of pin inti and pin intk are the connected
+ * to the same soc`s irq pin.
+ */
+ max7360->shared_irq = max7360->irq_inti;
+ ret = request_threaded_irq(max7360->shared_irq, NULL,
+ max7360_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "max7360", max7360);
+ if (ret) {
+ dev_err(max7360->dev, "failed to request IRQ: %d\n",
+ ret);
+ return ret;
+ }
+ } else {
+ max7360->shared_irq = 0;
+ ret = request_threaded_irq(max7360->irq_inti, NULL,
+ max7360_irqi,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "max7360", max7360);
+ if (ret) {
+ dev_err(max7360->dev, "failed to request inti IRQ: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = request_threaded_irq(max7360->irq_intk, NULL,
+ max7360_irqk,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "max7360", max7360);
+ if (ret) {
+ free_irq(max7360->irq_inti, max7360);
+ dev_err(max7360->dev, "failed to request intk IRQ: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ max7360->domain = irq_domain_add_simple(np, MAX7360_NR_INTERNAL_IRQS,
+ 0, &max7360_irq_ops, max7360);
+
+ if (!max7360->domain) {
+ max7360_free_irqs(max7360);
+ dev_err(max7360->dev, "Failed to create irqdomain\n");
+ return -ENODEV;
+ }
+
+ ret = irq_create_mapping(max7360->domain, MAX7360_INT_GPIO);
+ if (!ret) {
+ max7360_free_irqs(max7360);
+ dev_err(max7360->dev, "Failed to map GPIO IRQ\n");
+ return -EINVAL;
+ }
+
+ ret = irq_create_mapping(max7360->domain, MAX7360_INT_KEYPAD);
+ if (!ret) {
+ max7360_free_irqs(max7360);
+ dev_err(max7360->dev, "Failed to map KEYPAD IRQ\n");
+ return -EINVAL;
+ }
+
+ ret = irq_create_mapping(max7360->domain, MAX7360_INT_ROTARY);
+ if (!ret) {
+ max7360_free_irqs(max7360);
+ dev_err(max7360->dev, "Failed to map ROTARY IRQ\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+static int max7360_device_init(struct max7360 *max7360)
+{
+ int ret;
+
+ ret = mfd_add_devices(max7360->dev, PLATFORM_DEVID_NONE,
+ max7360_devices,
+ ARRAY_SIZE(max7360_devices), NULL,
+ 0, max7360->domain);
+ if (ret)
+ dev_err(max7360->dev, "failed to add child devices\n");
+
+ return ret;
+}
+
+static const struct regmap_range max7360_volatile_ranges[] = {
+ {
+ .range_min = MAX7360_REG_KEYFIFO,
+ .range_max = MAX7360_REG_KEYFIFO,
+ }, {
+ .range_min = MAX7360_REG_GPIOIN,
+ .range_max = MAX7360_REG_GPIOIN,
+ },
+};
+
+static const struct regmap_access_table max7360_volatile_table = {
+ .yes_ranges = max7360_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(max7360_volatile_ranges),
+};
+
+static const struct regmap_config max7360_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0xff,
+ .volatile_table = &max7360_volatile_table,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int max7360_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct device_node *np = i2c->dev.of_node;
+ struct max7360 *max7360;
+ int ret;
+
+ max7360 = devm_kzalloc(&i2c->dev, sizeof(struct max7360),
+ GFP_KERNEL);
+ if (!max7360)
+ return -ENOMEM;
+
+ max7360->dev = &i2c->dev;
+ max7360->i2c = i2c;
+
+ i2c_set_clientdata(i2c, max7360);
+
+ max7360->regmap = devm_regmap_init_i2c(i2c, &max7360_regmap_config);
+
+ ret = max7360_irq_init(max7360, np);
+ if (ret)
+ return ret;
+
+ ret = max7360_device_init(max7360);
+ if (ret) {
+ dev_err(max7360->dev, "failed to add child devices\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int max7360_remove(struct i2c_client *client)
+{
+ struct max7360 *max7360 = i2c_get_clientdata(client);
+
+ mfd_remove_devices(max7360->dev);
+
+ return 0;
+}
+
+static const struct of_device_id max7360_match[] = {
+ { .compatible = "maxim,max7360" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, max7360_match);
+
+static struct i2c_driver max7360_driver = {
+ .driver = {
+ .name = "max7360",
+ .of_match_table = max7360_match,
+ },
+ .probe = max7360_probe,
+ .remove = max7360_remove,
+};
+
+builtin_i2c_driver(max7360_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MAX7360 MFD core driver");
diff --git a/include/linux/mfd/max7360.h b/include/linux/mfd/max7360.h
new file mode 100644
index 0000000..c350d5e
--- /dev/null
+++ b/include/linux/mfd/max7360.h
@@ -0,0 +1,90 @@
+#ifndef __LINUX_MFD_MAX7360_H
+#define __LINUX_MFD_MAX7360_H
+#include <linux/regmap.h>
+
+#define MAX7360_MAX_KEY_ROWS 8
+#define MAX7360_MAX_KEY_COLS 8
+#define MAX7360_MAX_KEY_NUM (MAX7360_MAX_KEY_ROWS * MAX7360_MAX_KEY_COLS)
+#define MAX7360_ROW_SHIFT 3
+
+#define MAX7360_MAX_GPIO 8
+#define MAX7360_MAX_GPO 6
+#define MAX7360_COL_GPO_PINS 8
+/*
+ * MAX7360 registers
+ */
+#define MAX7360_REG_KEYFIFO 0x00
+#define MAX7360_REG_CONFIG 0x01
+#define MAX7360_REG_DEBOUNCE 0x02
+#define MAX7360_REG_INTERRUPT 0x03
+#define MAX7360_REG_PORTS 0x04
+#define MAX7360_REG_KEYREP 0x05
+#define MAX7360_REG_SLEEP 0x06
+
+/*
+ * MAX7360 registers
+ */
+#define MAX7360_REG_GPIOCFG 0x40
+#define MAX7360_REG_GPIOCTRL 0x41
+#define MAX7360_REG_GPIODEB 0x42
+#define MAX7360_REG_GPIOCURR 0x43
+#define MAX7360_REG_GPIOOUTM 0x44
+#define MAX7360_REG_PWMCOM 0x45
+#define MAX7360_REG_RTRCFG 0x46
+#define MAX7360_REG_GPIOIN 0x49
+#define MAX7360_REG_RTR_CNT 0x4A
+#define MAX7360_REG_PWMBASE 0x50
+#define MAX7360_REG_PWMCFG 0x58
+
+
+#define MAX7360_REG_PORTCFGBASE 0x58
+
+/*
+ * Configuration register bits
+ */
+#define MAX7360_CFG_SLEEP BIT(7)
+#define MAX7360_CFG_INTERRUPT BIT(5)
+#define MAX7360_CFG_KEY_RELEASE BIT(3)
+#define MAX7360_CFG_WAKEUP BIT(1)
+#define MAX7360_CFG_TIMEOUT BIT(0)
+
+/*
+ * Autosleep register values (ms)
+ */
+#define MAX7360_AUTOSLEEP_8192 0x01
+#define MAX7360_AUTOSLEEP_4096 0x02
+#define MAX7360_AUTOSLEEP_2048 0x03
+#define MAX7360_AUTOSLEEP_1024 0x04
+#define MAX7360_AUTOSLEEP_512 0x05
+#define MAX7360_AUTOSLEEP_256 0x06
+
+#define MAX7360_INT_INTI 0
+#define MAX7360_INT_INTK 1
+
+#define MAX7360_INT_GPIO 0
+#define MAX7360_INT_KEYPAD 1
+#define MAX7360_INT_ROTARY 2
+
+#define MAX7360_NR_INTERNAL_IRQS 3
+
+/**
+ * struct max7360
+ * @dev: Parent device pointer
+ * @i2c: I2c client pointer
+ * @domain: Irq domain pointer
+ * @regmap: Used for I2C communication on accessing registers
+ * shared_irq: Irq number if inti and intk pins are connected together
+ * irq_inti: Irq number for inti pin
+ * irq_intk: Irq number for inik pin
+ */
+struct max7360 {
+ struct device *dev;
+ struct i2c_client *i2c;
+ struct irq_domain *domain;
+ struct regmap *regmap;
+
+ int shared_irq;
+ int irq_inti;
+ int irq_intk;
+};
+#endif
--
2.9.3
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] mfd: max7360: Add mfd core device driver
2017-05-18 8:46 ` [PATCH 2/2] mfd: max7360: Add mfd core device driver Valentin Sitdikov
@ 2017-05-22 11:54 ` Lee Jones
0 siblings, 0 replies; 10+ messages in thread
From: Lee Jones @ 2017-05-22 11:54 UTC (permalink / raw)
To: Valentin Sitdikov
Cc: robh+dt, mark.rutland, devicetree, linux-kernel, Andrei Dranitca
On Thu, 18 May 2017, Valentin Sitdikov wrote:
> From: Andrei Dranitca <Andrei_Dranitca@mentor.com>
>
> This patch adds core/irq driver to support MAX7360 i2c chip
IRQ and I2C
> which contains keypad, gpio, pwm, gpo and rotary encoder submodules.
GPIO, PWM and GPO
> Signed-off-by: Valentin Sitdikov <valentin_sitdikov@mentor.com>
> Signed-off-by: Andrei Dranitca <Andrei_Dranitca@mentor.com>
These are in the wrong order.
> ---
> drivers/mfd/Kconfig | 16 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/max7360.c | 397 ++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/max7360.h | 130 +++++++++++++++
> 4 files changed, 544 insertions(+)
> create mode 100644 drivers/mfd/max7360.c
> create mode 100644 include/linux/mfd/max7360.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3eb5c93..894c2e9 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -721,6 +721,22 @@ config MFD_MAX8998
> additional drivers must be enabled in order to use the functionality
> of the device.
>
> +config MFD_MAX7360
> + tristate "Maxim Semiconductor MAX7360 support"
> + depends on I2C && OF
> + select MFD_CORE
> + select REGMAP_I2C
> + select IRQ_DOMAIN
> + help
> + Say yes here to add support for Maxim Semiconductor MAX7360.
> + This provides microprocessors with management of up to 64 key switches,
> + with an additional eight LED drivers/GPIOs that feature constant-current,
> + PWM intensity control, and rotary switch control options.
> +
> + This driver provides common support for accessing the device,
> + additional drivers must be enabled in order to use the functionality
> + of the device.
> +
> config MFD_MT6397
> tristate "MediaTek MT6397 PMIC Support"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index c16bf1e..9e721c0 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -137,6 +137,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
> obj-$(CONFIG_MFD_DA9150) += da9150-core.o
>
> obj-$(CONFIG_MFD_MAX14577) += max14577.o
> +obj-$(CONFIG_MFD_MAX7360) += max7360.o
> obj-$(CONFIG_MFD_MAX77620) += max77620.o
> obj-$(CONFIG_MFD_MAX77686) += max77686.o
> obj-$(CONFIG_MFD_MAX77693) += max77693.o
> diff --git a/drivers/mfd/max7360.c b/drivers/mfd/max7360.c
> new file mode 100644
> index 0000000..566434e
> --- /dev/null
> +++ b/drivers/mfd/max7360.c
> @@ -0,0 +1,397 @@
> +/*
> + * Copyright (C) 2017 Mentor Graphics
> + *
> + * Author: Valentin Sitdikov <Valentin.Sitdikov@mentor.com>
> + * Author: Andrei Dranitca <Andrei_Dranitca@mentor.com>
Order?
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
Remove the line above.
Do you have to use the full licence header? There is a short version,
any reason why you can't use it?
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/max7360.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/slab.h>
> +
> +
> +int max7360_request_pin(struct max7360 *max7360, u8 pin)
> +{
> + struct i2c_client *client = max7360->i2c;
> + int ret = 0;
No need to pre-initialise. Just return 0 at the end.
> + spin_lock(&max7360->lock);
> + if (max7360->gpio_pins & BIT(pin)) {
> + dev_err(&client->dev, "pin %d already requested, mask %x",
> + pin, max7360->gpio_pins);
> + spin_unlock(&max7360->lock);
> + return -EBUSY;
> + }
> + max7360->gpio_pins |= BIT(pin);
> + dev_dbg(&client->dev, "pin %d requested successfully", pin);
> + spin_unlock(&max7360->lock);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(max7360_request_pin);
> +
> +void max7360_free_pin(struct max7360 *max7360, u8 pin)
> +{
> + spin_lock(&max7360->lock);
> + max7360->gpio_pins &= ~BIT(pin);
> + spin_unlock(&max7360->lock);
> +}
> +EXPORT_SYMBOL_GPL(max7360_free_pin);
What do these pins do? Are they GPIOs?
If so, why aren't you using the GPIO API?
> +static const struct mfd_cell max7360_devices[] = {
> + {
> + .name = "max7360-gpio",
> + .of_compatible = "maxim,max7360-gpio",
> + },
> + {
> + .name = "max7360-keypad",
> + .of_compatible = "maxim,max7360-keypad",
> + },
> + {
> + .name = "max7360-pwm",
> + .of_compatible = "maxim,max7360-pwm",
> + },
> + {
> + .name = "max7360-rotary",
> + .of_compatible = "maxim,max7360-rotary",
> + },
> +};
> +
> +static irqreturn_t max7360_irq(int irq, void *data)
> +{
> + struct max7360 *max7360 = data;
> + int virq;
> +
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_GPIO);
> + handle_nested_irq(virq);
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_KEYPAD);
> + handle_nested_irq(virq);
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_ROTARY);
> + handle_nested_irq(virq);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t max7360_irqi(int irq, void *data)
> +{
> + struct max7360 *max7360 = data;
> + int virq;
> +
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_GPIO);
> + handle_nested_irq(virq);
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_ROTARY);
> + handle_nested_irq(virq);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t max7360_irqk(int irq, void *data)
> +{
> + struct max7360 *max7360 = data;
> + int virq;
> +
> + virq = irq_find_mapping(max7360->domain, MAX7360_INT_KEYPAD);
> + handle_nested_irq(virq);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int max7360_irq_map(struct irq_domain *d, unsigned int virq,
> + irq_hw_number_t hwirq)
> +{
> + struct max7360 *max7360 = d->host_data;
> +
> + irq_set_chip_data(virq, max7360);
> + irq_set_chip_and_handler(virq, &dummy_irq_chip,
> + handle_edge_irq);
> + irq_set_nested_thread(virq, 1);
> + irq_set_noprobe(virq);
> +
> + return 0;
> +}
> +
> +static void max7360_irq_unmap(struct irq_domain *d, unsigned int virq)
> +{
> + irq_set_chip_and_handler(virq, NULL, NULL);
> + irq_set_chip_data(virq, NULL);
> +}
> +
> +static const struct irq_domain_ops max7360_irq_ops = {
> + .map = max7360_irq_map,
> + .unmap = max7360_irq_unmap,
> + .xlate = irq_domain_xlate_onecell,
> +};
> +
> +static int max7360_irq_init(struct max7360 *max7360, struct device_node *np)
> +{
> + int ret;
> +
> + max7360->inti = of_irq_get_byname(np, "inti");
> + max7360->intk = of_irq_get_byname(np, "intk");
> +
> + if (max7360->inti < 0) {
> + dev_err(max7360->dev, "no inti provided");
> + return -ENODEV;
> + }
> +
> + if (max7360->intk < 0) {
> + dev_err(max7360->dev, "no intk provided");
> + return -ENODEV;
> + }
It's more conformant to place the ifs directly after where the
variable under test is initialised.
> + if (max7360->inti == max7360->intk) {
You need a comment here to explain exactly why this is required.
> + max7360->shared_irq = max7360->inti;
> + ret = request_threaded_irq(max7360->shared_irq, NULL,
> + max7360_irq,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "max7360", max7360);
> + if (ret) {
> + dev_err(max7360->dev, "failed to request IRQ: %d\n",
> + ret);
> + return ret;
> + }
> + } else {
> + max7360->shared_irq = 0;
> + ret = request_threaded_irq(max7360->inti, NULL, max7360_irqi,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "max7360", max7360);
> + if (ret) {
> + dev_err(max7360->dev, "failed to request inti IRQ: %d\n",
> + ret);
> + return ret;
> + }
> +
> + ret = request_threaded_irq(max7360->intk, NULL, max7360_irqk,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "max7360", max7360);
> + if (ret) {
> + free_irq(max7360->inti, max7360);
> + dev_err(max7360->dev, "failed to request intk IRQ: %d\n",
> + ret);
> + return ret;
> + }
> + }
> +
> + max7360->domain = irq_domain_add_simple(np, MAX7360_NR_INTERNAL_IRQS,
> + 0, &max7360_irq_ops, max7360);
> +
> + if (!max7360->domain) {
> + if (max7360->shared_irq)
> + free_irq(max7360->shared_irq, max7360);
> + else {
> + free_irq(max7360->inti, max7360);
> + free_irq(max7360->intk, max7360);
> + }
> + dev_err(max7360->dev, "Failed to create irqdomain\n");
> + return -ENODEV;
> + }
> +
> + irq_create_mapping(max7360->domain, MAX7360_INT_GPIO);
> + irq_create_mapping(max7360->domain, MAX7360_INT_KEYPAD);
> + irq_create_mapping(max7360->domain, MAX7360_INT_ROTARY);
Why aren't you checking the return values of these calls?
> + return 0;
> +}
> +
> +void max7360_fall_deepsleep(struct max7360 *max7360)
Drop the "_fall"
> +{
> + max7360_write_reg(max7360, MAX7360_REG_SLEEP, MAX7360_AUTOSLEEP_8192);
> +}
> +EXPORT_SYMBOL_GPL(max7360_fall_deepsleep);
> +
> +void max7360_take_catnap(struct max7360 *max7360)
The naming of the function can and should be improved.
> +{
> + max7360_write_reg(max7360, MAX7360_REG_SLEEP, MAX7360_AUTOSLEEP_256);
> +}
> +EXPORT_SYMBOL_GPL(max7360_take_catnap);
What is calling these functions?
> +static int max7360_chip_init(struct max7360 *max7360)
> +{
> + max7360->gpio_pins = MAX7360_MAX_GPIO;
> + max7360->gpo_count = 0;
> + max7360->col_count = MAX7360_COL_GPO_PINS;
This does not require its own function.
> + return 0;
> +}
> +
> +static int max7360_device_init(struct max7360 *max7360)
> +{
> + int ret = 0;
No need to pre-initialise.
> + ret = mfd_add_devices(max7360->dev, -1, max7360_devices,
Use the #defines, not -1.
> + ARRAY_SIZE(max7360_devices), NULL,
> + 0, max7360->domain);
> + if (ret)
> + dev_err(max7360->dev, "failed to add child devices\n");
> +
> + return ret;
> +}
> +
> +int max7360_request_gpo_pin_count(struct max7360 *max7360, u8 count)
> +{
> + if (count > MAX7360_MAX_GPO)
> + return -EINVAL;
'\n'
> + if (max7360->col_count + count > MAX7360_COL_GPO_PINS) {
> + dev_err(max7360->dev,
> + "trying to request %d pins as gpo while %d pins already used as COL\n",
> + count, max7360->col_count);
> + return -EINVAL;
> + }
> + max7360->gpo_count = count;
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(max7360_request_gpo_pin_count);
> +
> +int max7360_request_col_count(struct max7360 *max7360, u8 count)
> +{
> + if (max7360->gpo_count + count > MAX7360_COL_GPO_PINS) {
> + dev_err(max7360->dev,
> + "trying to request %d pins as COL while %d pins already used as gpo\n",
> + count, max7360->gpo_count);
> + return -EINVAL;
> + }
> + max7360->col_count = count;
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(max7360_request_col_count);
What is the purpose of these two functions?
> +static const struct regmap_range max7360_volatile_ranges[] = {
> + {
> + .range_min = MAX7360_REG_KEYFIFO,
> + .range_max = MAX7360_REG_KEYFIFO,
> + }, {
> + .range_min = 0x48,
> + .range_max = 0x4a,
No magic numbers please.
> + },
> +};
> +
> +static const struct regmap_access_table max7360_volatile_table = {
> + .yes_ranges = max7360_volatile_ranges,
> + .n_yes_ranges = ARRAY_SIZE(max7360_volatile_ranges),
> +};
> +
> +static const struct regmap_config max7360_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0xff,
> + .volatile_table = &max7360_volatile_table,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int max7360_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct device_node *np = i2c->dev.of_node;
> + struct max7360 *max7360;
> +
Remove this line.
> + int ret;
> +
> + max7360 = devm_kzalloc(&i2c->dev, sizeof(struct max7360),
> + GFP_KERNEL);
> + if (!max7360)
> + return -ENOMEM;
> +
> + spin_lock_init(&max7360->lock);
> +
> + max7360->dev = &i2c->dev;
> + max7360->i2c = i2c;
> +
> + i2c_set_clientdata(i2c, max7360);
> +
> + max7360->regmap = devm_regmap_init_i2c(i2c, &max7360_regmap_config);
> + ret = max7360_chip_init(max7360);
> + if (ret)
> + return ret;
> +
> + ret = max7360_irq_init(max7360, np);
> + if (ret)
> + return ret;
> +
> + ret = max7360_device_init(max7360);
> + if (ret) {
> + dev_err(max7360->dev, "failed to add child devices\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int max7360_remove(struct i2c_client *client)
> +{
> + struct max7360 *max7360 = i2c_get_clientdata(client);
> +
> + mfd_remove_devices(max7360->dev);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int max7360_suspend(struct device *dev)
> +{
> + return 0;
> +}
> +
> +static int max7360_resume(struct device *dev)
> +{
> + return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(max7360_dev_pm_ops, max7360_suspend, max7360_resume);
Why are you pretending that you support runtime PM?
> +static const struct of_device_id max7360_match[] = {
> + { .compatible = "maxim,max7360" },
> + { }
> +};
> +
Remove this line.
> +MODULE_DEVICE_TABLE(of, max7360_match);
> +
> +static const struct i2c_device_id max7360_id[] = {
> + { "max7360", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, max7360_id);
What are you using this table for?
> +static struct i2c_driver max7360_driver = {
> + .driver = {
> + .name = "max7360",
> + .pm = &max7360_dev_pm_ops,
> + .of_match_table = max7360_match,
> + },
> + .probe = max7360_probe,
> + .remove = max7360_remove,
> + .id_table = max7360_id,
> +};
> +
> +static int __init max7360_init(void)
> +{
> + return i2c_add_driver(&max7360_driver);
> +}
> +subsys_initcall(max7360_init);
> +
> +static void __exit max7360_exit(void)
> +{
> + i2c_del_driver(&max7360_driver);
> +}
> +module_exit(max7360_exit);
This looks like boiler plate.
Please see if there is a helper function for this.
> +MODULE_LICENSE("GPL v2");
This does not match the header comment.
> +MODULE_DESCRIPTION("MAX7360 MFD core driver");
> diff --git a/include/linux/mfd/max7360.h b/include/linux/mfd/max7360.h
> new file mode 100644
> index 0000000..d139ddd
> --- /dev/null
> +++ b/include/linux/mfd/max7360.h
> @@ -0,0 +1,130 @@
> +#ifndef __LINUX_MFD_MAX7360_H
> +#define __LINUX_MFD_MAX7360_H
> +#include <linux/regmap.h>
> +
> +#define MAX7360_MAX_KEY_ROWS 8
> +#define MAX7360_MAX_KEY_COLS 8
> +#define MAX7360_MAX_KEY_NUM (MAX7360_MAX_KEY_ROWS * MAX7360_MAX_KEY_COLS)
> +#define MAX7360_ROW_SHIFT 3
> +
> +#define MAX7360_MAX_GPIO 8
> +#define MAX7360_MAX_GPO 6
> +#define MAX7360_COL_GPO_PINS 8
> +/*
> + * MAX7360 registers
> + */
> +#define MAX7360_REG_KEYFIFO 0x00
> +#define MAX7360_REG_CONFIG 0x01
> +#define MAX7360_REG_DEBOUNCE 0x02
> +#define MAX7360_REG_INTERRUPT 0x03
> +#define MAX7360_REG_PORTS 0x04
> +#define MAX7360_REG_KEYREP 0x05
> +#define MAX7360_REG_SLEEP 0x06
> +
> +/*
> + * MAX7360 registers
> + */
> +#define MAX7360_REG_GPIOCFG 0x40
> +#define MAX7360_REG_GPIOCTRL 0x41
> +#define MAX7360_REG_GPIODEB 0x42
> +#define MAX7360_REG_GPIOCURR 0x43
> +#define MAX7360_REG_GPIOOUTM 0x44
> +#define MAX7360_REG_PWMCOM 0x45
> +#define MAX7360_REG_RTRCFG 0x46
> +#define MAX7360_REG_GPIOIN 0x49
> +#define MAX7360_REG_RTR_CNT 0x4A
> +#define MAX7360_REG_PWMBASE 0x50
> +#define MAX7360_REG_PWMCFG 0x58
> +
> +
> +#define MAX7360_REG_PORTCFGBASE 0x58
> +
> +/*
> + * Configuration register bits
> + */
> +#define MAX7360_CFG_SLEEP (1 << 7)
> +#define MAX7360_CFG_INTERRUPT (1 << 5)
> +#define MAX7360_CFG_KEY_RELEASE (1 << 3)
> +#define MAX7360_CFG_WAKEUP (1 << 1)
> +#define MAX7360_CFG_TIMEOUT (1 << 0)
Use BIT()
> +/*
> + * Autosleep register values (ms)
> + */
> +#define MAX7360_AUTOSLEEP_8192 0x01
> +#define MAX7360_AUTOSLEEP_4096 0x02
> +#define MAX7360_AUTOSLEEP_2048 0x03
> +#define MAX7360_AUTOSLEEP_1024 0x04
> +#define MAX7360_AUTOSLEEP_512 0x05
> +#define MAX7360_AUTOSLEEP_256 0x06
> +
> +#define MAX7360_INT_INTI 0
> +#define MAX7360_INT_INTK 1
> +
> +#define MAX7360_INT_GPIO 0
> +#define MAX7360_INT_KEYPAD 1
> +#define MAX7360_INT_ROTARY 2
> +
> +#define MAX7360_NR_INTERNAL_IRQS 3
> +
> +struct max7360 {
> + spinlock_t lock; /* lock access to the structure */
> + struct device *dev;
> + struct i2c_client *i2c;
> + struct irq_domain *domain;
> + struct regmap *regmap;
> +
> + int irq_base;
> + int num_gpio;
> + int shared_irq;
> + int inti;
> + int intk;
At no point do you explain what inti and inik is or the differences
between them. I suggest you add a kerneldoc header to this struct,
AND consider renaming them to something a little more descriptive,
since 'l' and 'k', even when prefixed with 'int' are not good variable
names.
> + u8 gpio_pins;
> + u8 col_count;
> + u8 gpo_count;
> +};
> +
> +static inline int max7360_read_reg(struct max7360 *max7360, int reg)
> +{
> + unsigned int ival;
> + int ret;
> +
> + ret = regmap_read(max7360->regmap, reg, &ival);
> + if (!ret)
> + return ival;
> + return 0;
> +}
> +
> +static inline int max7360_write_reg(struct max7360 *max7360, u8 reg, u8 val)
> +{
> + return regmap_write(max7360->regmap, reg, val);
> +}
> +
> +static inline int max7360_set_bits(struct max7360 *max7360, u8 reg,
> + unsigned int bit_mask)
> +{
> + return regmap_update_bits(max7360->regmap, reg, bit_mask, bit_mask);
> +}
> +
> +static inline int max7360_clr_bits(struct max7360 *max7360, u8 reg,
> + unsigned int bit_mask)
> +{
> + return regmap_update_bits(max7360->regmap, reg, bit_mask, 0);
> +}
> +
> +static inline int max7360_update(struct max7360 *max7360, u8 reg, u8 val,
> + unsigned int bit_mask)
> +{
> + return regmap_update_bits(max7360->regmap, reg, bit_mask, val);
> +}
> +
> +int max7360_request_pin(struct max7360 *max7360, u8 pin);
> +void max7360_free_pin(struct max7360 *max7360, u8 pin);
> +
> +void max7360_take_catnap(struct max7360 *max7360);
> +void max7360_fall_deepsleep(struct max7360 *max7360);
> +
> +int max7360_request_gpo_pin_count(struct max7360 *max7360, u8 count);
> +int max7360_request_col_count(struct max7360 *max7360, u8 count);
What are all these functions for?
I think you should remove them all.
> +#endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/2] mfd: max7360: Add mfd core device driver
2017-05-18 8:46 [PATCH v2 0/2] dt-bindings: mfd: Add max7360 mfd driver and DT documentation Valentin Sitdikov
@ 2017-05-18 8:46 ` Valentin Sitdikov
2017-05-22 11:54 ` Lee Jones
0 siblings, 1 reply; 10+ messages in thread
From: Valentin Sitdikov @ 2017-05-18 8:46 UTC (permalink / raw)
To: lee.jones, robh+dt, mark.rutland, devicetree, linux-kernel
Cc: Andrei Dranitca, Valentin Sitdikov
From: Andrei Dranitca <Andrei_Dranitca@mentor.com>
This patch adds core/irq driver to support MAX7360 i2c chip
which contains keypad, gpio, pwm, gpo and rotary encoder submodules.
Signed-off-by: Valentin Sitdikov <valentin_sitdikov@mentor.com>
Signed-off-by: Andrei Dranitca <Andrei_Dranitca@mentor.com>
---
drivers/mfd/Kconfig | 16 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/max7360.c | 397 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/max7360.h | 130 +++++++++++++++
4 files changed, 544 insertions(+)
create mode 100644 drivers/mfd/max7360.c
create mode 100644 include/linux/mfd/max7360.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3eb5c93..894c2e9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -721,6 +721,22 @@ config MFD_MAX8998
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_MAX7360
+ tristate "Maxim Semiconductor MAX7360 support"
+ depends on I2C && OF
+ select MFD_CORE
+ select REGMAP_I2C
+ select IRQ_DOMAIN
+ help
+ Say yes here to add support for Maxim Semiconductor MAX7360.
+ This provides microprocessors with management of up to 64 key switches,
+ with an additional eight LED drivers/GPIOs that feature constant-current,
+ PWM intensity control, and rotary switch control options.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_MT6397
tristate "MediaTek MT6397 PMIC Support"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c16bf1e..9e721c0 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -137,6 +137,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
obj-$(CONFIG_MFD_DA9150) += da9150-core.o
obj-$(CONFIG_MFD_MAX14577) += max14577.o
+obj-$(CONFIG_MFD_MAX7360) += max7360.o
obj-$(CONFIG_MFD_MAX77620) += max77620.o
obj-$(CONFIG_MFD_MAX77686) += max77686.o
obj-$(CONFIG_MFD_MAX77693) += max77693.o
diff --git a/drivers/mfd/max7360.c b/drivers/mfd/max7360.c
new file mode 100644
index 0000000..566434e
--- /dev/null
+++ b/drivers/mfd/max7360.c
@@ -0,0 +1,397 @@
+/*
+ * Copyright (C) 2017 Mentor Graphics
+ *
+ * Author: Valentin Sitdikov <Valentin.Sitdikov@mentor.com>
+ * Author: Andrei Dranitca <Andrei_Dranitca@mentor.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max7360.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+
+
+int max7360_request_pin(struct max7360 *max7360, u8 pin)
+{
+ struct i2c_client *client = max7360->i2c;
+ int ret = 0;
+
+ spin_lock(&max7360->lock);
+ if (max7360->gpio_pins & BIT(pin)) {
+ dev_err(&client->dev, "pin %d already requested, mask %x",
+ pin, max7360->gpio_pins);
+ spin_unlock(&max7360->lock);
+ return -EBUSY;
+ }
+ max7360->gpio_pins |= BIT(pin);
+ dev_dbg(&client->dev, "pin %d requested successfully", pin);
+ spin_unlock(&max7360->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(max7360_request_pin);
+
+void max7360_free_pin(struct max7360 *max7360, u8 pin)
+{
+ spin_lock(&max7360->lock);
+ max7360->gpio_pins &= ~BIT(pin);
+ spin_unlock(&max7360->lock);
+}
+EXPORT_SYMBOL_GPL(max7360_free_pin);
+
+static const struct mfd_cell max7360_devices[] = {
+ {
+ .name = "max7360-gpio",
+ .of_compatible = "maxim,max7360-gpio",
+ },
+ {
+ .name = "max7360-keypad",
+ .of_compatible = "maxim,max7360-keypad",
+ },
+ {
+ .name = "max7360-pwm",
+ .of_compatible = "maxim,max7360-pwm",
+ },
+ {
+ .name = "max7360-rotary",
+ .of_compatible = "maxim,max7360-rotary",
+ },
+};
+
+static irqreturn_t max7360_irq(int irq, void *data)
+{
+ struct max7360 *max7360 = data;
+ int virq;
+
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_GPIO);
+ handle_nested_irq(virq);
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_KEYPAD);
+ handle_nested_irq(virq);
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_ROTARY);
+ handle_nested_irq(virq);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max7360_irqi(int irq, void *data)
+{
+ struct max7360 *max7360 = data;
+ int virq;
+
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_GPIO);
+ handle_nested_irq(virq);
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_ROTARY);
+ handle_nested_irq(virq);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max7360_irqk(int irq, void *data)
+{
+ struct max7360 *max7360 = data;
+ int virq;
+
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_KEYPAD);
+ handle_nested_irq(virq);
+
+ return IRQ_HANDLED;
+}
+
+static int max7360_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct max7360 *max7360 = d->host_data;
+
+ irq_set_chip_data(virq, max7360);
+ irq_set_chip_and_handler(virq, &dummy_irq_chip,
+ handle_edge_irq);
+ irq_set_nested_thread(virq, 1);
+ irq_set_noprobe(virq);
+
+ return 0;
+}
+
+static void max7360_irq_unmap(struct irq_domain *d, unsigned int virq)
+{
+ irq_set_chip_and_handler(virq, NULL, NULL);
+ irq_set_chip_data(virq, NULL);
+}
+
+static const struct irq_domain_ops max7360_irq_ops = {
+ .map = max7360_irq_map,
+ .unmap = max7360_irq_unmap,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int max7360_irq_init(struct max7360 *max7360, struct device_node *np)
+{
+ int ret;
+
+ max7360->inti = of_irq_get_byname(np, "inti");
+ max7360->intk = of_irq_get_byname(np, "intk");
+
+ if (max7360->inti < 0) {
+ dev_err(max7360->dev, "no inti provided");
+ return -ENODEV;
+ }
+
+ if (max7360->intk < 0) {
+ dev_err(max7360->dev, "no intk provided");
+ return -ENODEV;
+ }
+
+ if (max7360->inti == max7360->intk) {
+ max7360->shared_irq = max7360->inti;
+ ret = request_threaded_irq(max7360->shared_irq, NULL,
+ max7360_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "max7360", max7360);
+ if (ret) {
+ dev_err(max7360->dev, "failed to request IRQ: %d\n",
+ ret);
+ return ret;
+ }
+ } else {
+ max7360->shared_irq = 0;
+ ret = request_threaded_irq(max7360->inti, NULL, max7360_irqi,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "max7360", max7360);
+ if (ret) {
+ dev_err(max7360->dev, "failed to request inti IRQ: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = request_threaded_irq(max7360->intk, NULL, max7360_irqk,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "max7360", max7360);
+ if (ret) {
+ free_irq(max7360->inti, max7360);
+ dev_err(max7360->dev, "failed to request intk IRQ: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ max7360->domain = irq_domain_add_simple(np, MAX7360_NR_INTERNAL_IRQS,
+ 0, &max7360_irq_ops, max7360);
+
+ if (!max7360->domain) {
+ if (max7360->shared_irq)
+ free_irq(max7360->shared_irq, max7360);
+ else {
+ free_irq(max7360->inti, max7360);
+ free_irq(max7360->intk, max7360);
+ }
+ dev_err(max7360->dev, "Failed to create irqdomain\n");
+ return -ENODEV;
+ }
+
+ irq_create_mapping(max7360->domain, MAX7360_INT_GPIO);
+ irq_create_mapping(max7360->domain, MAX7360_INT_KEYPAD);
+ irq_create_mapping(max7360->domain, MAX7360_INT_ROTARY);
+
+ return 0;
+}
+
+void max7360_fall_deepsleep(struct max7360 *max7360)
+{
+ max7360_write_reg(max7360, MAX7360_REG_SLEEP, MAX7360_AUTOSLEEP_8192);
+}
+EXPORT_SYMBOL_GPL(max7360_fall_deepsleep);
+
+void max7360_take_catnap(struct max7360 *max7360)
+{
+ max7360_write_reg(max7360, MAX7360_REG_SLEEP, MAX7360_AUTOSLEEP_256);
+}
+EXPORT_SYMBOL_GPL(max7360_take_catnap);
+
+static int max7360_chip_init(struct max7360 *max7360)
+{
+ max7360->gpio_pins = MAX7360_MAX_GPIO;
+ max7360->gpo_count = 0;
+ max7360->col_count = MAX7360_COL_GPO_PINS;
+ return 0;
+}
+
+static int max7360_device_init(struct max7360 *max7360)
+{
+ int ret = 0;
+
+ ret = mfd_add_devices(max7360->dev, -1, max7360_devices,
+ ARRAY_SIZE(max7360_devices), NULL,
+ 0, max7360->domain);
+ if (ret)
+ dev_err(max7360->dev, "failed to add child devices\n");
+
+ return ret;
+}
+
+int max7360_request_gpo_pin_count(struct max7360 *max7360, u8 count)
+{
+ if (count > MAX7360_MAX_GPO)
+ return -EINVAL;
+ if (max7360->col_count + count > MAX7360_COL_GPO_PINS) {
+ dev_err(max7360->dev,
+ "trying to request %d pins as gpo while %d pins already used as COL\n",
+ count, max7360->col_count);
+ return -EINVAL;
+ }
+ max7360->gpo_count = count;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max7360_request_gpo_pin_count);
+
+int max7360_request_col_count(struct max7360 *max7360, u8 count)
+{
+ if (max7360->gpo_count + count > MAX7360_COL_GPO_PINS) {
+ dev_err(max7360->dev,
+ "trying to request %d pins as COL while %d pins already used as gpo\n",
+ count, max7360->gpo_count);
+ return -EINVAL;
+ }
+ max7360->col_count = count;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max7360_request_col_count);
+
+static const struct regmap_range max7360_volatile_ranges[] = {
+ {
+ .range_min = MAX7360_REG_KEYFIFO,
+ .range_max = MAX7360_REG_KEYFIFO,
+ }, {
+ .range_min = 0x48,
+ .range_max = 0x4a,
+ },
+};
+
+static const struct regmap_access_table max7360_volatile_table = {
+ .yes_ranges = max7360_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(max7360_volatile_ranges),
+};
+
+static const struct regmap_config max7360_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0xff,
+ .volatile_table = &max7360_volatile_table,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int max7360_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct device_node *np = i2c->dev.of_node;
+ struct max7360 *max7360;
+
+ int ret;
+
+ max7360 = devm_kzalloc(&i2c->dev, sizeof(struct max7360),
+ GFP_KERNEL);
+ if (!max7360)
+ return -ENOMEM;
+
+ spin_lock_init(&max7360->lock);
+
+ max7360->dev = &i2c->dev;
+ max7360->i2c = i2c;
+
+ i2c_set_clientdata(i2c, max7360);
+
+ max7360->regmap = devm_regmap_init_i2c(i2c, &max7360_regmap_config);
+ ret = max7360_chip_init(max7360);
+ if (ret)
+ return ret;
+
+ ret = max7360_irq_init(max7360, np);
+ if (ret)
+ return ret;
+
+ ret = max7360_device_init(max7360);
+ if (ret) {
+ dev_err(max7360->dev, "failed to add child devices\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int max7360_remove(struct i2c_client *client)
+{
+ struct max7360 *max7360 = i2c_get_clientdata(client);
+
+ mfd_remove_devices(max7360->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int max7360_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static int max7360_resume(struct device *dev)
+{
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(max7360_dev_pm_ops, max7360_suspend, max7360_resume);
+
+static const struct of_device_id max7360_match[] = {
+ { .compatible = "maxim,max7360" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, max7360_match);
+
+static const struct i2c_device_id max7360_id[] = {
+ { "max7360", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max7360_id);
+
+static struct i2c_driver max7360_driver = {
+ .driver = {
+ .name = "max7360",
+ .pm = &max7360_dev_pm_ops,
+ .of_match_table = max7360_match,
+ },
+ .probe = max7360_probe,
+ .remove = max7360_remove,
+ .id_table = max7360_id,
+};
+
+static int __init max7360_init(void)
+{
+ return i2c_add_driver(&max7360_driver);
+}
+subsys_initcall(max7360_init);
+
+static void __exit max7360_exit(void)
+{
+ i2c_del_driver(&max7360_driver);
+}
+module_exit(max7360_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MAX7360 MFD core driver");
diff --git a/include/linux/mfd/max7360.h b/include/linux/mfd/max7360.h
new file mode 100644
index 0000000..d139ddd
--- /dev/null
+++ b/include/linux/mfd/max7360.h
@@ -0,0 +1,130 @@
+#ifndef __LINUX_MFD_MAX7360_H
+#define __LINUX_MFD_MAX7360_H
+#include <linux/regmap.h>
+
+#define MAX7360_MAX_KEY_ROWS 8
+#define MAX7360_MAX_KEY_COLS 8
+#define MAX7360_MAX_KEY_NUM (MAX7360_MAX_KEY_ROWS * MAX7360_MAX_KEY_COLS)
+#define MAX7360_ROW_SHIFT 3
+
+#define MAX7360_MAX_GPIO 8
+#define MAX7360_MAX_GPO 6
+#define MAX7360_COL_GPO_PINS 8
+/*
+ * MAX7360 registers
+ */
+#define MAX7360_REG_KEYFIFO 0x00
+#define MAX7360_REG_CONFIG 0x01
+#define MAX7360_REG_DEBOUNCE 0x02
+#define MAX7360_REG_INTERRUPT 0x03
+#define MAX7360_REG_PORTS 0x04
+#define MAX7360_REG_KEYREP 0x05
+#define MAX7360_REG_SLEEP 0x06
+
+/*
+ * MAX7360 registers
+ */
+#define MAX7360_REG_GPIOCFG 0x40
+#define MAX7360_REG_GPIOCTRL 0x41
+#define MAX7360_REG_GPIODEB 0x42
+#define MAX7360_REG_GPIOCURR 0x43
+#define MAX7360_REG_GPIOOUTM 0x44
+#define MAX7360_REG_PWMCOM 0x45
+#define MAX7360_REG_RTRCFG 0x46
+#define MAX7360_REG_GPIOIN 0x49
+#define MAX7360_REG_RTR_CNT 0x4A
+#define MAX7360_REG_PWMBASE 0x50
+#define MAX7360_REG_PWMCFG 0x58
+
+
+#define MAX7360_REG_PORTCFGBASE 0x58
+
+/*
+ * Configuration register bits
+ */
+#define MAX7360_CFG_SLEEP (1 << 7)
+#define MAX7360_CFG_INTERRUPT (1 << 5)
+#define MAX7360_CFG_KEY_RELEASE (1 << 3)
+#define MAX7360_CFG_WAKEUP (1 << 1)
+#define MAX7360_CFG_TIMEOUT (1 << 0)
+
+/*
+ * Autosleep register values (ms)
+ */
+#define MAX7360_AUTOSLEEP_8192 0x01
+#define MAX7360_AUTOSLEEP_4096 0x02
+#define MAX7360_AUTOSLEEP_2048 0x03
+#define MAX7360_AUTOSLEEP_1024 0x04
+#define MAX7360_AUTOSLEEP_512 0x05
+#define MAX7360_AUTOSLEEP_256 0x06
+
+#define MAX7360_INT_INTI 0
+#define MAX7360_INT_INTK 1
+
+#define MAX7360_INT_GPIO 0
+#define MAX7360_INT_KEYPAD 1
+#define MAX7360_INT_ROTARY 2
+
+#define MAX7360_NR_INTERNAL_IRQS 3
+
+struct max7360 {
+ spinlock_t lock; /* lock access to the structure */
+ struct device *dev;
+ struct i2c_client *i2c;
+ struct irq_domain *domain;
+ struct regmap *regmap;
+
+ int irq_base;
+ int num_gpio;
+ int shared_irq;
+ int inti;
+ int intk;
+ u8 gpio_pins;
+ u8 col_count;
+ u8 gpo_count;
+};
+
+static inline int max7360_read_reg(struct max7360 *max7360, int reg)
+{
+ unsigned int ival;
+ int ret;
+
+ ret = regmap_read(max7360->regmap, reg, &ival);
+ if (!ret)
+ return ival;
+ return 0;
+}
+
+static inline int max7360_write_reg(struct max7360 *max7360, u8 reg, u8 val)
+{
+ return regmap_write(max7360->regmap, reg, val);
+}
+
+static inline int max7360_set_bits(struct max7360 *max7360, u8 reg,
+ unsigned int bit_mask)
+{
+ return regmap_update_bits(max7360->regmap, reg, bit_mask, bit_mask);
+}
+
+static inline int max7360_clr_bits(struct max7360 *max7360, u8 reg,
+ unsigned int bit_mask)
+{
+ return regmap_update_bits(max7360->regmap, reg, bit_mask, 0);
+}
+
+static inline int max7360_update(struct max7360 *max7360, u8 reg, u8 val,
+ unsigned int bit_mask)
+{
+ return regmap_update_bits(max7360->regmap, reg, bit_mask, val);
+}
+
+int max7360_request_pin(struct max7360 *max7360, u8 pin);
+void max7360_free_pin(struct max7360 *max7360, u8 pin);
+
+void max7360_take_catnap(struct max7360 *max7360);
+void max7360_fall_deepsleep(struct max7360 *max7360);
+
+int max7360_request_gpo_pin_count(struct max7360 *max7360, u8 count);
+int max7360_request_col_count(struct max7360 *max7360, u8 count);
+
+#endif
--
2.9.3
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] mfd: max7360: Add mfd core device driver
2017-04-25 8:15 [PATCH 0/2] Add max7360 mfd driver and DT documentation Valentin Sitdikov
@ 2017-04-25 8:15 ` Valentin Sitdikov
0 siblings, 0 replies; 10+ messages in thread
From: Valentin Sitdikov @ 2017-04-25 8:15 UTC (permalink / raw)
To: lee.jones, robh+dt, mark.rutland, devicetree, linux-kernel
Cc: Andrei Dranitca, Valentin Sitdikov
From: Andrei Dranitca <Andrei_Dranitca@mentor.com>
This patch adds core/irq driver to support MAX7360 i2c chip
which contains keypad, gpio, pwm, gpo and rotary encoder submodules.
Signed-off-by: Valentin Sitdikov <valentin_sitdikov@mentor.com>
Signed-off-by: Andrei Dranitca <Andrei_Dranitca@mentor.com>
---
drivers/mfd/Kconfig | 16 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/max7360.c | 393 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/max7360.h | 130 +++++++++++++++
4 files changed, 540 insertions(+)
create mode 100644 drivers/mfd/max7360.c
create mode 100644 include/linux/mfd/max7360.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 55ecdfb..2227c65 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -688,6 +688,22 @@ config MFD_MAX8998
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_MAX7360
+ tristate "Maxim Semiconductor MAX7360 support"
+ depends on I2C && OF
+ select MFD_CORE
+ select REGMAP_I2C
+ select IRQ_DOMAIN
+ help
+ Say yes here to add support for Maxim Semiconductor MAX7360.
+ This provides microprocessors with management of up to 64 key switches,
+ with an additional eight LED drivers/GPIOs that feature constant-current,
+ PWM intensity control, and rotary switch control options.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_MT6397
tristate "MediaTek MT6397 PMIC Support"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 31ce076..f01f3a1 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -133,6 +133,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
obj-$(CONFIG_MFD_DA9150) += da9150-core.o
obj-$(CONFIG_MFD_MAX14577) += max14577.o
+obj-$(CONFIG_MFD_MAX7360) += max7360.o
obj-$(CONFIG_MFD_MAX77620) += max77620.o
obj-$(CONFIG_MFD_MAX77686) += max77686.o
obj-$(CONFIG_MFD_MAX77693) += max77693.o
diff --git a/drivers/mfd/max7360.c b/drivers/mfd/max7360.c
new file mode 100644
index 0000000..b4c2fdd
--- /dev/null
+++ b/drivers/mfd/max7360.c
@@ -0,0 +1,393 @@
+/*
+ * Copyright (C) 2017 Mentor Graphics
+ *
+ * Author: Valentin Sitdikov <Valentin.Sitdikov@mentor.com>
+ * Author: Andrei Dranitca <Andrei_Dranitca@mentor.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max7360.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+
+
+int max7360_request_pin(struct max7360 *max7360, u8 pin)
+{
+ struct i2c_client *client = max7360->i2c;
+ int ret = 0;
+
+ spin_lock(&max7360->lock);
+ if (max7360->gpio_pins & BIT(pin)) {
+ dev_err(&client->dev, "pin %d already requested, mask %x",
+ pin, max7360->gpio_pins);
+ spin_unlock(&max7360->lock);
+ return -EBUSY;
+ }
+ max7360->gpio_pins |= BIT(pin);
+ dev_dbg(&client->dev, "pin %d requested successfully", pin);
+ spin_unlock(&max7360->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(max7360_request_pin);
+
+void max7360_free_pin(struct max7360 *max7360, u8 pin)
+{
+ spin_lock(&max7360->lock);
+ max7360->gpio_pins &= ~BIT(pin);
+ spin_unlock(&max7360->lock);
+}
+EXPORT_SYMBOL_GPL(max7360_free_pin);
+
+static const struct mfd_cell max7360_devices[] = {
+ {
+ .name = "max7360-gpio",
+ .of_compatible = "maxim,max7360-gpio",
+ },
+ {
+ .name = "max7360-keypad",
+ .of_compatible = "maxim,max7360-keypad",
+ },
+ {
+ .name = "max7360-pwm",
+ .of_compatible = "maxim,max7360-pwm",
+ },
+ {
+ .name = "max7360-rotary",
+ .of_compatible = "maxim,max7360-rotary",
+ },
+};
+
+static irqreturn_t max7360_irq(int irq, void *data)
+{
+ struct max7360 *max7360 = data;
+ int virq;
+
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_GPIO);
+ handle_nested_irq(virq);
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_KEYPAD);
+ handle_nested_irq(virq);
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_ROTARY);
+ handle_nested_irq(virq);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max7360_irqi(int irq, void *data)
+{
+ struct max7360 *max7360 = data;
+ int virq;
+
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_GPIO);
+ handle_nested_irq(virq);
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_ROTARY);
+ handle_nested_irq(virq);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max7360_irqk(int irq, void *data)
+{
+ struct max7360 *max7360 = data;
+ int virq;
+
+ virq = irq_find_mapping(max7360->domain, MAX7360_INT_KEYPAD);
+ handle_nested_irq(virq);
+
+ return IRQ_HANDLED;
+}
+
+static int max7360_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct max7360 *max7360 = d->host_data;
+
+ irq_set_chip_data(virq, max7360);
+ irq_set_chip_and_handler(virq, &dummy_irq_chip,
+ handle_edge_irq);
+ irq_set_nested_thread(virq, 1);
+ irq_set_noprobe(virq);
+
+ return 0;
+}
+
+static void max7360_irq_unmap(struct irq_domain *d, unsigned int virq)
+{
+ irq_set_chip_and_handler(virq, NULL, NULL);
+ irq_set_chip_data(virq, NULL);
+}
+
+static const struct irq_domain_ops max7360_irq_ops = {
+ .map = max7360_irq_map,
+ .unmap = max7360_irq_unmap,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int max7360_irq_init(struct max7360 *max7360, struct device_node *np)
+{
+ int ret;
+
+ max7360->inti = of_irq_get_byname(np, "inti");
+ max7360->intk = of_irq_get_byname(np, "intk");
+
+ if (max7360->inti < 0 || max7360->intk < 0) {
+ max7360->shared_irq = of_irq_get_byname(np, "int-shared");
+
+ if (max7360->shared_irq < 0) {
+ dev_err(max7360->dev, "failed to find IRQ in dts\n");
+ return -EINVAL;
+ }
+
+ ret = request_threaded_irq(max7360->shared_irq, NULL,
+ max7360_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "max7360", max7360);
+ if (ret) {
+ dev_err(max7360->dev, "failed to request IRQ: %d\n",
+ ret);
+ return ret;
+ }
+ } else {
+ max7360->shared_irq = 0;
+ ret = request_threaded_irq(max7360->inti, NULL, max7360_irqi,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "max7360", max7360);
+ if (ret) {
+ dev_err(max7360->dev, "failed to request inti IRQ: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = request_threaded_irq(max7360->intk, NULL, max7360_irqk,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "max7360", max7360);
+ if (ret) {
+ free_irq(max7360->inti, max7360);
+ dev_err(max7360->dev, "failed to request intk IRQ: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ max7360->domain = irq_domain_add_simple(np, MAX7360_NR_INTERNAL_IRQS,
+ 0, &max7360_irq_ops, max7360);
+
+ if (!max7360->domain) {
+ if (max7360->shared_irq)
+ free_irq(max7360->shared_irq, max7360);
+ else {
+ free_irq(max7360->inti, max7360);
+ free_irq(max7360->intk, max7360);
+ }
+ dev_err(max7360->dev, "Failed to create irqdomain\n");
+ return -ENODEV;
+ }
+
+ irq_create_mapping(max7360->domain, MAX7360_INT_GPIO);
+ irq_create_mapping(max7360->domain, MAX7360_INT_KEYPAD);
+ irq_create_mapping(max7360->domain, MAX7360_INT_ROTARY);
+
+ return 0;
+}
+
+void max7360_fall_deepsleep(struct max7360 *max7360)
+{
+ max7360_write_reg(max7360, MAX7360_REG_SLEEP, MAX7360_AUTOSLEEP_8192);
+}
+EXPORT_SYMBOL_GPL(max7360_fall_deepsleep);
+
+void max7360_take_catnap(struct max7360 *max7360)
+{
+ max7360_write_reg(max7360, MAX7360_REG_SLEEP, MAX7360_AUTOSLEEP_256);
+}
+EXPORT_SYMBOL_GPL(max7360_take_catnap);
+
+static int max7360_chip_init(struct max7360 *max7360)
+{
+ max7360->gpio_pins = MAX7360_MAX_GPIO;
+ max7360->gpo_count = 0;
+ max7360->col_count = MAX7360_COL_GPO_PINS;
+ return 0;
+}
+
+static int max7360_device_init(struct max7360 *max7360)
+{
+ int ret = 0;
+
+ ret = mfd_add_devices(max7360->dev, -1, max7360_devices,
+ ARRAY_SIZE(max7360_devices), NULL,
+ 0, max7360->domain);
+ if (ret)
+ dev_err(max7360->dev, "failed to add child devices\n");
+
+ return ret;
+}
+
+int max7360_request_gpo_pin_count(struct max7360 *max7360, u8 count)
+{
+ if (count > MAX7360_MAX_GPO)
+ return -EINVAL;
+ if (max7360->col_count + count > MAX7360_COL_GPO_PINS) {
+ dev_err(max7360->dev,
+ "trying to request %d pins as gpo while %d pins already used as COL\n",
+ count, max7360->col_count);
+ return -EINVAL;
+ }
+ max7360->gpo_count = count;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max7360_request_gpo_pin_count);
+
+int max7360_request_col_count(struct max7360 *max7360, u8 count)
+{
+ if (max7360->gpo_count + count > MAX7360_COL_GPO_PINS) {
+ dev_err(max7360->dev,
+ "trying to request %d pins as COL while %d pins already used as gpo\n",
+ count, max7360->gpo_count);
+ return -EINVAL;
+ }
+ max7360->col_count = count;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max7360_request_col_count);
+
+static const struct regmap_range max7360_volatile_ranges[] = {
+ {
+ .range_min = MAX7360_REG_KEYFIFO,
+ .range_max = MAX7360_REG_KEYFIFO,
+ }, {
+ .range_min = 0x48,
+ .range_max = 0x4a,
+ },
+};
+
+static const struct regmap_access_table max7360_volatile_table = {
+ .yes_ranges = max7360_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(max7360_volatile_ranges),
+};
+
+static const struct regmap_config max7360_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0xff,
+ .volatile_table = &max7360_volatile_table,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int max7360_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct device_node *np = i2c->dev.of_node;
+ struct max7360 *max7360;
+
+ int ret;
+
+ max7360 = devm_kzalloc(&i2c->dev, sizeof(struct max7360),
+ GFP_KERNEL);
+ if (!max7360)
+ return -ENOMEM;
+
+ spin_lock_init(&max7360->lock);
+
+ max7360->dev = &i2c->dev;
+ max7360->i2c = i2c;
+
+ i2c_set_clientdata(i2c, max7360);
+
+ max7360->regmap = devm_regmap_init_i2c(i2c, &max7360_regmap_config);
+ ret = max7360_chip_init(max7360);
+ if (ret)
+ return ret;
+
+ ret = max7360_irq_init(max7360, np);
+ if (ret)
+ return ret;
+
+ ret = max7360_device_init(max7360);
+ if (ret) {
+ dev_err(max7360->dev, "failed to add child devices\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int max7360_remove(struct i2c_client *client)
+{
+ struct max7360 *max7360 = i2c_get_clientdata(client);
+
+ mfd_remove_devices(max7360->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int max7360_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static int max7360_resume(struct device *dev)
+{
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(max7360_dev_pm_ops, max7360_suspend, max7360_resume);
+
+static const struct of_device_id max7360_match[] = {
+ { .compatible = "maxim,max7360" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, max7360_match);
+
+static const struct i2c_device_id max7360_id[] = {
+ { "max7360", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max7360_id);
+
+static struct i2c_driver max7360_driver = {
+ .driver = {
+ .name = "max7360",
+ .pm = &max7360_dev_pm_ops,
+ .of_match_table = max7360_match,
+ },
+ .probe = max7360_probe,
+ .remove = max7360_remove,
+ .id_table = max7360_id,
+};
+
+static int __init max7360_init(void)
+{
+ return i2c_add_driver(&max7360_driver);
+}
+subsys_initcall(max7360_init);
+
+static void __exit max7360_exit(void)
+{
+ i2c_del_driver(&max7360_driver);
+}
+module_exit(max7360_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MAX7360 MFD core driver");
diff --git a/include/linux/mfd/max7360.h b/include/linux/mfd/max7360.h
new file mode 100644
index 0000000..d139ddd
--- /dev/null
+++ b/include/linux/mfd/max7360.h
@@ -0,0 +1,130 @@
+#ifndef __LINUX_MFD_MAX7360_H
+#define __LINUX_MFD_MAX7360_H
+#include <linux/regmap.h>
+
+#define MAX7360_MAX_KEY_ROWS 8
+#define MAX7360_MAX_KEY_COLS 8
+#define MAX7360_MAX_KEY_NUM (MAX7360_MAX_KEY_ROWS * MAX7360_MAX_KEY_COLS)
+#define MAX7360_ROW_SHIFT 3
+
+#define MAX7360_MAX_GPIO 8
+#define MAX7360_MAX_GPO 6
+#define MAX7360_COL_GPO_PINS 8
+/*
+ * MAX7360 registers
+ */
+#define MAX7360_REG_KEYFIFO 0x00
+#define MAX7360_REG_CONFIG 0x01
+#define MAX7360_REG_DEBOUNCE 0x02
+#define MAX7360_REG_INTERRUPT 0x03
+#define MAX7360_REG_PORTS 0x04
+#define MAX7360_REG_KEYREP 0x05
+#define MAX7360_REG_SLEEP 0x06
+
+/*
+ * MAX7360 registers
+ */
+#define MAX7360_REG_GPIOCFG 0x40
+#define MAX7360_REG_GPIOCTRL 0x41
+#define MAX7360_REG_GPIODEB 0x42
+#define MAX7360_REG_GPIOCURR 0x43
+#define MAX7360_REG_GPIOOUTM 0x44
+#define MAX7360_REG_PWMCOM 0x45
+#define MAX7360_REG_RTRCFG 0x46
+#define MAX7360_REG_GPIOIN 0x49
+#define MAX7360_REG_RTR_CNT 0x4A
+#define MAX7360_REG_PWMBASE 0x50
+#define MAX7360_REG_PWMCFG 0x58
+
+
+#define MAX7360_REG_PORTCFGBASE 0x58
+
+/*
+ * Configuration register bits
+ */
+#define MAX7360_CFG_SLEEP (1 << 7)
+#define MAX7360_CFG_INTERRUPT (1 << 5)
+#define MAX7360_CFG_KEY_RELEASE (1 << 3)
+#define MAX7360_CFG_WAKEUP (1 << 1)
+#define MAX7360_CFG_TIMEOUT (1 << 0)
+
+/*
+ * Autosleep register values (ms)
+ */
+#define MAX7360_AUTOSLEEP_8192 0x01
+#define MAX7360_AUTOSLEEP_4096 0x02
+#define MAX7360_AUTOSLEEP_2048 0x03
+#define MAX7360_AUTOSLEEP_1024 0x04
+#define MAX7360_AUTOSLEEP_512 0x05
+#define MAX7360_AUTOSLEEP_256 0x06
+
+#define MAX7360_INT_INTI 0
+#define MAX7360_INT_INTK 1
+
+#define MAX7360_INT_GPIO 0
+#define MAX7360_INT_KEYPAD 1
+#define MAX7360_INT_ROTARY 2
+
+#define MAX7360_NR_INTERNAL_IRQS 3
+
+struct max7360 {
+ spinlock_t lock; /* lock access to the structure */
+ struct device *dev;
+ struct i2c_client *i2c;
+ struct irq_domain *domain;
+ struct regmap *regmap;
+
+ int irq_base;
+ int num_gpio;
+ int shared_irq;
+ int inti;
+ int intk;
+ u8 gpio_pins;
+ u8 col_count;
+ u8 gpo_count;
+};
+
+static inline int max7360_read_reg(struct max7360 *max7360, int reg)
+{
+ unsigned int ival;
+ int ret;
+
+ ret = regmap_read(max7360->regmap, reg, &ival);
+ if (!ret)
+ return ival;
+ return 0;
+}
+
+static inline int max7360_write_reg(struct max7360 *max7360, u8 reg, u8 val)
+{
+ return regmap_write(max7360->regmap, reg, val);
+}
+
+static inline int max7360_set_bits(struct max7360 *max7360, u8 reg,
+ unsigned int bit_mask)
+{
+ return regmap_update_bits(max7360->regmap, reg, bit_mask, bit_mask);
+}
+
+static inline int max7360_clr_bits(struct max7360 *max7360, u8 reg,
+ unsigned int bit_mask)
+{
+ return regmap_update_bits(max7360->regmap, reg, bit_mask, 0);
+}
+
+static inline int max7360_update(struct max7360 *max7360, u8 reg, u8 val,
+ unsigned int bit_mask)
+{
+ return regmap_update_bits(max7360->regmap, reg, bit_mask, val);
+}
+
+int max7360_request_pin(struct max7360 *max7360, u8 pin);
+void max7360_free_pin(struct max7360 *max7360, u8 pin);
+
+void max7360_take_catnap(struct max7360 *max7360);
+void max7360_fall_deepsleep(struct max7360 *max7360);
+
+int max7360_request_gpo_pin_count(struct max7360 *max7360, u8 count);
+int max7360_request_col_count(struct max7360 *max7360, u8 count);
+
+#endif
--
2.9.3
^ permalink raw reply related [flat|nested] 10+ messages in thread
end of thread, other threads:[~2017-06-13 13:41 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-13 12:20 [PATCH v4 0/2] dt-bindings: mfd: Add max7360 mfd driver and DT documentation Valentin Sitdikov
2017-06-13 12:20 ` [PATCH 1/2] dt-bindings: mfd: Add DT bindings documentation for the max7360 mfd driver Valentin Sitdikov
2017-06-13 13:28 ` Vladimir Zapolskiy
2017-06-13 12:20 ` [PATCH 2/2] mfd: max7360: Add mfd core device driver Valentin Sitdikov
2017-06-13 13:41 ` Vladimir Zapolskiy
-- strict thread matches above, loose matches on Subject: below --
2017-06-02 16:21 [PATCH v3 0/2] dt-bindings: mfd: Add max7360 mfd driver and DT documentation Valentin Sitdikov
2017-06-02 16:21 ` [PATCH 2/2] mfd: max7360: Add mfd core device driver Valentin Sitdikov
2017-06-05 9:29 ` Lee Jones
2017-05-18 8:46 [PATCH v2 0/2] dt-bindings: mfd: Add max7360 mfd driver and DT documentation Valentin Sitdikov
2017-05-18 8:46 ` [PATCH 2/2] mfd: max7360: Add mfd core device driver Valentin Sitdikov
2017-05-22 11:54 ` Lee Jones
2017-04-25 8:15 [PATCH 0/2] Add max7360 mfd driver and DT documentation Valentin Sitdikov
2017-04-25 8:15 ` [PATCH 2/2] mfd: max7360: Add mfd core device driver Valentin Sitdikov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).