* [next ] x86: Assembler messages: Error: invalid operands (*UND* and .data..percpu sections) for `+'
@ 2022-03-31 12:45 Naresh Kamboju
2022-03-31 13:14 ` Paolo Bonzini
0 siblings, 1 reply; 2+ messages in thread
From: Naresh Kamboju @ 2022-03-31 12:45 UTC (permalink / raw)
To: X86 ML, kvm list, open list, Linux-Next Mailing List, regressions
Cc: Li RongQing, Paolo Bonzini, Sean Christopherson,
Vitaly Kuznetsov, Wanpeng Li, Jim Mattson, Joerg Roedel,
Thomas Gleixner, Ingo Molnar, Borislav Petkov, Dave Hansen,
H. Peter Anvin, Arnd Bergmann
Linux next-20220331 x86_64 build failed due to below warnings / errors
with gcc-11. build log link [1].
make --silent --keep-going --jobs=8
O=/home/tuxbuild/.cache/tuxmake/builds/1/build ARCH=x86_64
CROSS_COMPILE=x86_64-linux-gnu- 'CC=sccache x86_64-linux-gnu-gcc'
'HOSTCC=sccache gcc'
/tmp/ccS5DmVa.s: Assembler messages:
/tmp/ccS5DmVa.s:59: Error: invalid operands (*UND* and .data..percpu
sections) for `+'
make[3]: *** [/builds/linux/scripts/Makefile.build:289:
arch/x86/kernel/kvm.o] Error 1
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
metadata:
git_ref: master
git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
git_sha: fdcbcd1348f4ef713668bae1b0fa9774e1811205
git_describe: next-20220331
build link: https://builds.tuxbuild.com/278RMAf1jcRHx7LwzjCMgFSMMLt/
# To install tuxmake on your system globally:
# sudo pip3 install -U tuxmake
tuxmake --runtime podman --target-arch x86_64 --toolchain gcc-11
--kconfig https://builds.tuxbuild.com/278RMAf1jcRHx7LwzjCMgFSMMLt/config
--
Linaro LKFT
https://lkft.linaro.org
[1] https://builds.tuxbuild.com/278RMAf1jcRHx7LwzjCMgFSMMLt/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [next ] x86: Assembler messages: Error: invalid operands (*UND* and .data..percpu sections) for `+'
2022-03-31 12:45 [next ] x86: Assembler messages: Error: invalid operands (*UND* and .data..percpu sections) for `+' Naresh Kamboju
@ 2022-03-31 13:14 ` Paolo Bonzini
0 siblings, 0 replies; 2+ messages in thread
From: Paolo Bonzini @ 2022-03-31 13:14 UTC (permalink / raw)
To: Naresh Kamboju, X86 ML, kvm list, open list,
Linux-Next Mailing List, regressions
Cc: Li RongQing, Sean Christopherson, Vitaly Kuznetsov, Wanpeng Li,
Jim Mattson, Joerg Roedel, Thomas Gleixner, Ingo Molnar,
Borislav Petkov, Dave Hansen, H. Peter Anvin, Arnd Bergmann
On 3/31/22 14:45, Naresh Kamboju wrote:
> Linux next-20220331 x86_64 build failed due to below warnings / errors
> with gcc-11. build log link [1].
>
> make --silent --keep-going --jobs=8
> O=/home/tuxbuild/.cache/tuxmake/builds/1/build ARCH=x86_64
> CROSS_COMPILE=x86_64-linux-gnu- 'CC=sccache x86_64-linux-gnu-gcc'
> 'HOSTCC=sccache gcc'
> /tmp/ccS5DmVa.s: Assembler messages:
> /tmp/ccS5DmVa.s:59: Error: invalid operands (*UND* and .data..percpu
> sections) for `+'
> make[3]: *** [/builds/linux/scripts/Makefile.build:289:
> arch/x86/kernel/kvm.o] Error 1
>
> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixed already, but thanks for the report!
Paolo
> metadata:
> git_ref: master
> git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
> git_sha: fdcbcd1348f4ef713668bae1b0fa9774e1811205
> git_describe: next-20220331
> build link: https://builds.tuxbuild.com/278RMAf1jcRHx7LwzjCMgFSMMLt/
>
>
> # To install tuxmake on your system globally:
> # sudo pip3 install -U tuxmake
>
> tuxmake --runtime podman --target-arch x86_64 --toolchain gcc-11
> --kconfig https://builds.tuxbuild.com/278RMAf1jcRHx7LwzjCMgFSMMLt/config
>
>
> --
> Linaro LKFT
> https://lkft.linaro.org
>
> [1] https://builds.tuxbuild.com/278RMAf1jcRHx7LwzjCMgFSMMLt/
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-03-31 13:15 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-31 12:45 [next ] x86: Assembler messages: Error: invalid operands (*UND* and .data..percpu sections) for `+' Naresh Kamboju
2022-03-31 13:14 ` Paolo Bonzini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).